From 5b1afe32cf7496acea8182278aca83f59e8384e3 Mon Sep 17 00:00:00 2001
From: Florian Pritz <bluewind@xinu.at>
Date: Mon, 11 Feb 2013 22:58:16 +0100
Subject: Make code launchpad/energia compatible

Signed-off-by: Florian Pritz <bluewind@xinu.at>
---
 .../examples/SerialDisplay/SerialDisplay.ino       | 87 ++++++++++++++++++++++
 1 file changed, 87 insertions(+)
 create mode 100644 lib/LiquidCrystal/examples/SerialDisplay/SerialDisplay.ino

(limited to 'lib/LiquidCrystal/examples/SerialDisplay/SerialDisplay.ino')

diff --git a/lib/LiquidCrystal/examples/SerialDisplay/SerialDisplay.ino b/lib/LiquidCrystal/examples/SerialDisplay/SerialDisplay.ino
new file mode 100644
index 0000000..f76d23d
--- /dev/null
+++ b/lib/LiquidCrystal/examples/SerialDisplay/SerialDisplay.ino
@@ -0,0 +1,87 @@
+/*
+  LiquidCrystal Library - Serial Input
+ 
+ Demonstrates the use a 16x2 LCD display.  The LiquidCrystal
+ library works with all LCD displays that are compatible with the 
+ Hitachi HD44780 driver. There are many of them out there, and you
+ can usually tell them by the 16-pin interface.
+ 
+ This sketch displays text sent over the serial port 
+ (e.g. from the Serial Monitor) on an attached LCD.
+ 
+ The circuit:
+ =================================
+ LCD pin              Connect to
+ ---------------------------------
+ 01 - GND             GND, pot
+ 02 - VCC             +5V, pot
+ 03 - Contrast        Pot wiper
+ 04 - RS              Pin8 (P2.0)
+ 05 - R/W             GND
+ 06 - EN              Pin9 (P2.1)
+ 07 - DB0             GND
+ 08 - DB1             GND
+ 09 - DB2             GND
+ 10 - DB3             GND
+ 11 - DB4             Pin10 (P2.2)
+ 12 - DB5             Pin11 (P2.3)
+ 13 - DB6             Pin12 (P2.4)
+ 14 - DB7             Pin13 (P2.5)
+ 15 - BL+             +5V
+ 16 - BL-             GND
+ =================================
+
+ The circuit:
+ * LCD RS pin to digital pin 12
+ * LCD Enable pin to digital pin 11
+ * LCD D4 pin to digital pin 5
+ * LCD D5 pin to digital pin 4
+ * LCD D6 pin to digital pin 3
+ * LCD D7 pin to digital pin 2
+ * LCD R/W pin to ground
+ * 10K resistor:
+ * ends to +5V and ground
+ * wiper to LCD VO pin (pin 3)
+ 
+ Library originally added 18 Apr 2008
+ by David A. Mellis
+ library modified 5 Jul 2009
+ by Limor Fried (http://www.ladyada.net)
+ example added 9 Jul 2009
+ by Tom Igoe 
+ modified 22 Nov 2010
+ by Tom Igoe
+ 
+ This example code is in the public domain.
+ 
+ http://www.arduino.cc/en/Tutorial/LiquidCrystal
+ */
+
+// include the library code:
+#include <LiquidCrystal.h>
+
+// initialize the library with the numbers of the interface pins
+LiquidCrystal lcd(P2_0, P2_1, P2_2, P2_3, P2_4, P2_5);
+
+void setup(){
+    // set up the LCD's number of columns and rows: 
+  lcd.begin(16, 2);
+  // initialize the serial communications:
+  Serial.begin(9600);
+}
+
+void loop()
+{
+  // when characters arrive over the serial port...
+  if (Serial.available()) {
+    // wait a bit for the entire message to arrive
+    delay(100);
+    // clear the screen
+    lcd.clear();
+    // read all the available characters
+    while (Serial.available() > 0) {
+      // display each character to the LCD
+      lcd.write(Serial.read());
+    }
+  }
+}
-- 
cgit v1.2.3-24-g4f1b