From 5b1afe32cf7496acea8182278aca83f59e8384e3 Mon Sep 17 00:00:00 2001
From: Florian Pritz <bluewind@xinu.at>
Date: Mon, 11 Feb 2013 22:58:16 +0100
Subject: Make code launchpad/energia compatible

Signed-off-by: Florian Pritz <bluewind@xinu.at>
---
 lib/LiquidCrystal/examples/setCursor/setCursor.ino | 81 ++++++++++++++++++++++
 1 file changed, 81 insertions(+)
 create mode 100644 lib/LiquidCrystal/examples/setCursor/setCursor.ino

(limited to 'lib/LiquidCrystal/examples/setCursor/setCursor.ino')

diff --git a/lib/LiquidCrystal/examples/setCursor/setCursor.ino b/lib/LiquidCrystal/examples/setCursor/setCursor.ino
new file mode 100644
index 0000000..131e810
--- /dev/null
+++ b/lib/LiquidCrystal/examples/setCursor/setCursor.ino
@@ -0,0 +1,81 @@
+/*
+  LiquidCrystal Library - setCursor
+ 
+ Demonstrates the use a 16x2 LCD display.  The LiquidCrystal
+ library works with all LCD displays that are compatible with the 
+ Hitachi HD44780 driver. There are many of them out there, and you
+ can usually tell them by the 16-pin interface.
+ 
+ This sketch prints to all the positions of the LCD using the
+ setCursor(0 method:
+  
+ The circuit:
+ =================================
+ LCD pin              Connect to
+ ---------------------------------
+ 01 - GND             GND, pot
+ 02 - VCC             +5V, pot
+ 03 - Contrast        Pot wiper
+ 04 - RS              Pin8 (P2.0)
+ 05 - R/W             GND
+ 06 - EN              Pin9 (P2.1)
+ 07 - DB0             GND
+ 08 - DB1             GND
+ 09 - DB2             GND
+ 10 - DB3             GND
+ 11 - DB4             Pin10 (P2.2)
+ 12 - DB5             Pin11 (P2.3)
+ 13 - DB6             Pin12 (P2.4)
+ 14 - DB7             Pin13 (P2.5)
+ 15 - BL+             +5V
+ 16 - BL-             GND
+ =================================
+
+ Library originally added 18 Apr 2008
+ by David A. Mellis
+ library modified 5 Jul 2009
+ by Limor Fried (http://www.ladyada.net)
+ example added 9 Jul 2009
+ by Tom Igoe 
+ modified 22 Nov 2010
+ by Tom Igoe
+ 
+ This example code is in the public domain.
+ 
+ http://www.arduino.cc/en/Tutorial/LiquidCrystal
+ */
+
+// include the library code:
+#include <LiquidCrystal.h>
+
+// these constants won't change.  But you can change the size of
+// your LCD using them:
+const int numRows = 2;
+const int numCols = 16;
+
+// initialize the library with the numbers of the interface pins
+LiquidCrystal lcd(P2_0, P2_1, P2_2, P2_3, P2_4, P2_5);
+
+void setup() {
+  // set up the LCD's number of columns and rows: 
+  lcd.begin(numCols,numRows);
+}
+
+void loop() {
+  // loop from ASCII 'a' to ASCII 'z':
+  for (int thisLetter = 'a'; thisLetter <= 'z'; thisLetter++) {
+    // loop over the columns:
+    for (int thisCol = 0; thisCol < numRows; thisCol++) {
+      // loop over the rows:
+      for (int thisRow = 0; thisRow < numCols; thisRow++) {
+        // set the cursor position:
+        lcd.setCursor(thisRow,thisCol);
+        // print the letter:
+        lcd.write(thisLetter);
+        delay(200);
+      }
+    }
+  }
+}
+
+
-- 
cgit v1.2.3-24-g4f1b