From ede898fe5f786d261e1b1791ac102e9cf3fa7366 Mon Sep 17 00:00:00 2001 From: Florian Pritz Date: Sun, 28 Jul 2013 14:12:59 +0200 Subject: inital commit Signed-off-by: Florian Pritz --- .../DS18x20_Temperature/DS18x20_Temperature.pde | 112 +++++++++++++++++++++ .../examples/DS2408_Switch/DS2408_Switch.pde | 77 ++++++++++++++ lib/OneWire/examples/DS250x_PROM/DS250x_PROM.pde | 90 +++++++++++++++++ 3 files changed, 279 insertions(+) create mode 100644 lib/OneWire/examples/DS18x20_Temperature/DS18x20_Temperature.pde create mode 100644 lib/OneWire/examples/DS2408_Switch/DS2408_Switch.pde create mode 100644 lib/OneWire/examples/DS250x_PROM/DS250x_PROM.pde (limited to 'lib/OneWire/examples') diff --git a/lib/OneWire/examples/DS18x20_Temperature/DS18x20_Temperature.pde b/lib/OneWire/examples/DS18x20_Temperature/DS18x20_Temperature.pde new file mode 100644 index 0000000..68ca194 --- /dev/null +++ b/lib/OneWire/examples/DS18x20_Temperature/DS18x20_Temperature.pde @@ -0,0 +1,112 @@ +#include + +// OneWire DS18S20, DS18B20, DS1822 Temperature Example +// +// http://www.pjrc.com/teensy/td_libs_OneWire.html +// +// The DallasTemperature library can do all this work for you! +// http://milesburton.com/Dallas_Temperature_Control_Library + +OneWire ds(10); // on pin 10 (a 4.7K resistor is necessary) + +void setup(void) { + Serial.begin(9600); +} + +void loop(void) { + byte i; + byte present = 0; + byte type_s; + byte data[12]; + byte addr[8]; + float celsius, fahrenheit; + + if ( !ds.search(addr)) { + Serial.println("No more addresses."); + Serial.println(); + ds.reset_search(); + delay(250); + return; + } + + Serial.print("ROM ="); + for( i = 0; i < 8; i++) { + Serial.write(' '); + Serial.print(addr[i], HEX); + } + + if (OneWire::crc8(addr, 7) != addr[7]) { + Serial.println("CRC is not valid!"); + return; + } + Serial.println(); + + // the first ROM byte indicates which chip + switch (addr[0]) { + case 0x10: + Serial.println(" Chip = DS18S20"); // or old DS1820 + type_s = 1; + break; + case 0x28: + Serial.println(" Chip = DS18B20"); + type_s = 0; + break; + case 0x22: + Serial.println(" Chip = DS1822"); + type_s = 0; + break; + default: + Serial.println("Device is not a DS18x20 family device."); + return; + } + + ds.reset(); + ds.select(addr); + ds.write(0x44, 1); // start conversion, with parasite power on at the end + + delay(1000); // maybe 750ms is enough, maybe not + // we might do a ds.depower() here, but the reset will take care of it. + + present = ds.reset(); + ds.select(addr); + ds.write(0xBE); // Read Scratchpad + + Serial.print(" Data = "); + Serial.print(present, HEX); + Serial.print(" "); + for ( i = 0; i < 9; i++) { // we need 9 bytes + data[i] = ds.read(); + Serial.print(data[i], HEX); + Serial.print(" "); + } + Serial.print(" CRC="); + Serial.print(OneWire::crc8(data, 8), HEX); + Serial.println(); + + // Convert the data to actual temperature + // because the result is a 16 bit signed integer, it should + // be stored to an "int16_t" type, which is always 16 bits + // even when compiled on a 32 bit processor. + int16_t raw = (data[1] << 8) | data[0]; + if (type_s) { + raw = raw << 3; // 9 bit resolution default + if (data[7] == 0x10) { + // "count remain" gives full 12 bit resolution + raw = (raw & 0xFFF0) + 12 - data[6]; + } + } else { + byte cfg = (data[4] & 0x60); + // at lower res, the low bits are undefined, so let's zero them + if (cfg == 0x00) raw = raw & ~7; // 9 bit resolution, 93.75 ms + else if (cfg == 0x20) raw = raw & ~3; // 10 bit res, 187.5 ms + else if (cfg == 0x40) raw = raw & ~1; // 11 bit res, 375 ms + //// default is 12 bit resolution, 750 ms conversion time + } + celsius = (float)raw / 16.0; + fahrenheit = celsius * 1.8 + 32.0; + Serial.print(" Temperature = "); + Serial.print(celsius); + Serial.print(" Celsius, "); + Serial.print(fahrenheit); + Serial.println(" Fahrenheit"); +} diff --git a/lib/OneWire/examples/DS2408_Switch/DS2408_Switch.pde b/lib/OneWire/examples/DS2408_Switch/DS2408_Switch.pde new file mode 100644 index 0000000..d171f9b --- /dev/null +++ b/lib/OneWire/examples/DS2408_Switch/DS2408_Switch.pde @@ -0,0 +1,77 @@ +#include + +/* + * DS2408 8-Channel Addressable Switch + * + * Writte by Glenn Trewitt, glenn at trewitt dot org + * + * Some notes about the DS2408: + * - Unlike most input/output ports, the DS2408 doesn't have mode bits to + * set whether the pins are input or output. If you issue a read command, + * they're inputs. If you write to them, they're outputs. + * - For reading from a switch, you should use 10K pull-up resisters. + */ + +void PrintBytes(uint8_t* addr, uint8_t count, bool newline=0) { + for (uint8_t i = 0; i < count; i++) { + Serial.print(addr[i]>>4, HEX); + Serial.print(addr[i]&0x0f, HEX); + } + if (newline) + Serial.println(); +} + +void ReadAndReport(OneWire* net, uint8_t* addr) { + Serial.print(" Reading DS2408 "); + PrintBytes(addr, 8); + Serial.println(); + + uint8_t buf[13]; // Put everything in the buffer so we can compute CRC easily. + buf[0] = 0xF0; // Read PIO Registers + buf[1] = 0x88; // LSB address + buf[2] = 0x00; // MSB address + net->write_bytes(buf, 3); + net->read_bytes(buf+3, 10); // 3 cmd bytes, 6 data bytes, 2 0xFF, 2 CRC16 + net->reset(); + + if (!OneWire::check_crc16(buf, 11, &buf[11])) { + Serial.print("CRC failure in DS2408 at "); + PrintBytes(addr, 8, true); + return; + } + Serial.print(" DS2408 data = "); + // First 3 bytes contain command, register address. + Serial.println(buf[3], BIN); +} + +OneWire net(10); // on pin 10 + +void setup(void) { + Serial.begin(9600); +} + +void loop(void) { + byte i; + byte present = 0; + byte addr[8]; + + if (!net.search(addr)) { + Serial.print("No more addresses.\n"); + net.reset_search(); + delay(1000); + return; + } + + if (OneWire::crc8(addr, 7) != addr[7]) { + Serial.print("CRC is not valid!\n"); + return; + } + + if (addr[0] != 0x29) { + PrintBytes(addr, 8); + Serial.print(" is not a DS2408.\n"); + return; + } + + ReadAndReport(&net, addr); +} diff --git a/lib/OneWire/examples/DS250x_PROM/DS250x_PROM.pde b/lib/OneWire/examples/DS250x_PROM/DS250x_PROM.pde new file mode 100644 index 0000000..baa51c8 --- /dev/null +++ b/lib/OneWire/examples/DS250x_PROM/DS250x_PROM.pde @@ -0,0 +1,90 @@ +/* +DS250x add-only programmable memory reader w/SKIP ROM. + + The DS250x is a 512/1024bit add-only PROM(you can add data but cannot change the old one) that's used mainly for device identification purposes + like serial number, mfgr data, unique identifiers, etc. It uses the Maxim 1-wire bus. + + This sketch will use the SKIP ROM function that skips the 1-Wire search phase since we only have one device connected in the bus on digital pin 6. + If more than one device is connected to the bus, it will fail. + Sketch will not verify if device connected is from the DS250x family since the skip rom function effectively skips the family-id byte readout. + thus it is possible to run this sketch with any Maxim OneWire device in which case the command CRC will most likely fail. + Sketch will only read the first page of memory(32bits) starting from the lower address(0000h), if more than 1 device is present, then use the sketch with search functions. + Remember to put a 4.7K pullup resistor between pin 6 and +Vcc + + To change the range or ammount of data to read, simply change the data array size, LSB/MSB addresses and for loop iterations + + This example code is in the public domain and is provided AS-IS. + + Built with Arduino 0022 and PJRC OneWire 2.0 library http://www.pjrc.com/teensy/td_libs_OneWire.html + + created by Guillermo Lovato + march/2011 + + */ + +#include +OneWire ds(6); // OneWire bus on digital pin 6 +void setup() { + Serial.begin (9600); +} + +void loop() { + byte i; // This is for the for loops + boolean present; // device present var + byte data[32]; // container for the data from device + byte leemem[3] = { // array with the commands to initiate a read, DS250x devices expect 3 bytes to start a read: command,LSB&MSB adresses + 0xF0 , 0x00 , 0x00 }; // 0xF0 is the Read Data command, followed by 00h 00h as starting address(the beginning, 0000h) + byte ccrc; // Variable to store the command CRC + byte ccrc_calc; + + present = ds.reset(); // OneWire bus reset, always needed to start operation on the bus, returns a 1/TRUE if there's a device present. + ds.skip(); // Skip ROM search + + if (present == TRUE){ // We only try to read the data if there's a device present + Serial.println("DS250x device present"); + ds.write(leemem[0],1); // Read data command, leave ghost power on + ds.write(leemem[1],1); // LSB starting address, leave ghost power on + ds.write(leemem[2],1); // MSB starting address, leave ghost power on + + ccrc = ds.read(); // DS250x generates a CRC for the command we sent, we assign a read slot and store it's value + ccrc_calc = OneWire::crc8(leemem, 3); // We calculate the CRC of the commands we sent using the library function and store it + + if ( ccrc_calc != ccrc) { // Then we compare it to the value the ds250x calculated, if it fails, we print debug messages and abort + Serial.println("Invalid command CRC!"); + Serial.print("Calculated CRC:"); + Serial.println(ccrc_calc,HEX); // HEX makes it easier to observe and compare + Serial.print("DS250x readback CRC:"); + Serial.println(ccrc,HEX); + return; // Since CRC failed, we abort the rest of the loop and start over + } + Serial.println("Data is: "); // For the printout of the data + for ( i = 0; i < 32; i++) { // Now it's time to read the PROM data itself, each page is 32 bytes so we need 32 read commands + data[i] = ds.read(); // we store each read byte to a different position in the data array + Serial.print(data[i]); // printout in ASCII + Serial.print(" "); // blank space + } + Serial.println(); + delay(5000); // Delay so we don't saturate the serial output + } + else { // Nothing is connected in the bus + Serial.println("Nothing connected"); + delay(3000); + } +} + + + + + + + + + + + + + + + + + -- cgit v1.2.3-24-g4f1b