summaryrefslogtreecommitdiffstats
path: root/tupkg
diff options
context:
space:
mode:
Diffstat (limited to 'tupkg')
-rw-r--r--tupkg/README.txt99
-rw-r--r--tupkg/client/communitypkg132
-rwxr-xr-xtupkg/client/tupkg216
-rwxr-xr-xtupkg/scripts/run-tupkgs4
-rwxr-xr-xtupkg/scripts/run-tupkgupdate19
-rwxr-xr-xtupkg/scripts/stop-tupkgs3
-rwxr-xr-xtupkg/server/tupkgs329
-rw-r--r--tupkg/server/tupkgs.conf10
-rwxr-xr-xtupkg/update/tupkgupdate622
-rwxr-xr-xtupkg/update/tupkgupdate-lite513
-rwxr-xr-xtupkg/update/tupkgupdate64579
11 files changed, 0 insertions, 2526 deletions
diff --git a/tupkg/README.txt b/tupkg/README.txt
deleted file mode 100644
index 47facc46..00000000
--- a/tupkg/README.txt
+++ /dev/null
@@ -1,99 +0,0 @@
-TU Packaging Tools (tupkg)
---------------------------
-- client side (python for proof of concept, later re-write to C?)
- The main purpose of this tool is to upload the compiled
- pkg.tar.gz to the server. It can (should?) do some verification
- on the package prior to uploading to the server. It will have
- a config file to store run-time information such as username
- (email), password, and server name.
-
-- server side (python for proof of concept, later re-write to C?)
- The server side will handle incoming connections from its client
- side counterpart. The server should bind to port 80 (maybe a
- vhost such as tupkg.archlinux.org?) so that firewalls won't be
- an issue. The server verifies the client authentication data,
- and then accepts the package(s). If port 80 is not available,
- perhaps 443, or are there other 'standard' ports that usually
- do not get filtered?
-
- I think the server should be multithreaded to handle simultaneous
- uploads rather than queue up requests. The download should be
- stored in a temp directory based on the username to prevent
- directory, filename clashes.
-
- Once the package(s) is uploaded, the server can either kick off
- a gensync, or we can write a separate script to call gensync once
- or twice a day. My preference would be a separate script to call
- gensync (like the *NIX philosophy of one tool per task).
-
-- protocol (c: => client, s: => server)
- Whenever the client/server exchange a message, it is always
- preceeded by two-bytes representing the following message's
- length. For example, when the client connects, it will send:
-
- 0x0028username=bfinch@example.net&password=B0b
-
- 0x0028 is the 40 byte strlen of the message in two-bytes. The
- client and server always read two-bytes from the socket, and
- then know how much data is coming and can read that amount of
- bytes from the socket.
-
- ==> authentication
- c: username=emailaddy&password=mypassword
- s: result=PASS|FAIL
-
- NOTE: We can add encryption easily enough with the python
- version using the socket.ssl method.
-
- ==> uploading package data
- if PASS:
-
- c: numpkgs=2&name1=p1.pkg.tar.gz&size1=123&md5sum1=abcd\
- name2=p2.pkg.tar.gz&size2=3&md5sum2=def1
- s: numpkgs=2&name1=p1.pkg.tar.gz&size1=119&\
- name2=p2.pkg.tar.gz&size2=0 (*)
-
- (*) NOTE: The server will reply back to the client how many
- packages it has already received and its local file size.
- This way, the client can resume an upload. In the example
- above, the server still needs the last four (123-119) bytes
- for the first package, and that it has no part of the
- second package. The client would then begin sending the
- last four bytes from the first package (p1.pkg.tar.gz) and
- then follow it with the full second package (p2.pkg.tar.gz).
- The data would be sent as a continuous chunk of data. The
- server will then need to track which bytes belong to which
- package.
-
- else FAIL:
- c: -spits out error message on stderr to user-
-
-
- ==> after upload completes
- The server should verify the integrity of the uploaded packages
- by doing an md5sum on each and sending the info back to the client
- for comparison. After sending the message, the server waits for
- the 'ack' message from the client and then closes the connection.
-
- s: np=2&m1=PASS&m2=FAIL
- c: ack
-
- The client replies with the 'ack' and then closes its connection
- to the server. It then reports the PASS/FAIL status of each
- package's upload attempt.
-
- NOTE: If the upload fails (client connection dies), the server
- keeps any data it has received in order to support resuming an
- upload. However, if the client uploads all data, and the server
- successully reads all data and the final MD5 fails, the server
- deletes the failed package.
-
-
-Terms/definitions:
-======================
-TU - No change (trusted by the community, if anyone asks what trust
- means)
-TUR - renamed to Arch User-community Repo (AUR) (so we can use -u for
- versions)
-Incoming - renamed to "Unsupported"
-
diff --git a/tupkg/client/communitypkg b/tupkg/client/communitypkg
deleted file mode 100644
index 8579273d..00000000
--- a/tupkg/client/communitypkg
+++ /dev/null
@@ -1,132 +0,0 @@
-#!/bin/bash
-
-# Source makepkg.conf; fail if it is not found
-if [ -r "/etc/makepkg.conf" ]; then
- source "/etc/makepkg.conf"
-else
- echo "/etc/makepkg.conf not found!"
- exit 1
-fi
-
-# Source user-specific makepkg.conf overrides
-if [ -r ~/.makepkg.conf ]; then
- source ~/.makepkg.conf
-fi
-
-cmd=`basename $0`
-
-if [ ! -f PKGBUILD ]; then
- echo "No PKGBUILD file"
- exit 1
-fi
-
-# define tags and staging areas based on architecture
-if [ "$CARCH" = "i686" ]; then
- currenttag='CURRENT'
- testingtag='TESTING'
- suffix=''
-elif [ "$CARCH" = "x86_64" ]; then
- currenttag='CURRENT-64'
- testingtag='TESTING-64'
- suffix='64'
-else
- echo "CARCH must be set to a recognized value!"
- exit 1
-fi
-
-source PKGBUILD
-pkgfile=${pkgname}-${pkgver}-${pkgrel}-${CARCH}.pkg.tar.gz
-oldstylepkgfile=${pkgname}-${pkgver}-${pkgrel}.pkg.tar.gz
-
-if [ ! -f $pkgfile ]; then
- if [ -f $PKGDEST/$pkgfile ]; then
- pkgfile=$PKGDEST/$pkgfile
- oldstylepkgfile=$PKGDEST/$oldstylepkgfile
- elif [ -f $oldstylepkgfile ]; then
- pkgfile=$oldstylepkgfile
- elif [ -f $PKGDEST/$oldstylepkgfile ]; then
- pkgfile=$PKGDEST/$oldstylepkgfile
- else
- echo "File $pkgfile doesn't exist"
- exit 1
- fi
-fi
-
-if [ "$cmd" == "extrapkg" ]; then
- repo="extra"
- tag="$currenttag"
-elif [ "$cmd" == "corepkg" ]; then
- repo="core"
- tag="$currenttag"
-elif [ "$cmd" == "testingpkg" ]; then
- repo="testing"
- tag="$testingtag"
-elif [ "$cmd" == "unstablepkg" ]; then
- repo="unstable"
- tag="$currenttag"
-elif [ "$cmd" == "communitypkg" ]; then
- repo="community"
- tag="$currenttag"
-fi
-
-# see if any limit options were passed, we'll send them to SCP
-unset scpopts
-if [ "$1" = "-l" ]; then
- scpopts="$1 $2"
- shift 2
-fi
-
-if [ "$repo" != "community" ]; then
- # combine what we know into a variable (suffix defined based on $CARCH)
- uploadto="staging/${repo}${suffix}/add/$(basename ${pkgfile})"
- scp ${scpopts} "${pkgfile}" "archlinux.org:${uploadto}"
- if [ "$(md5sum "${pkgfile}" | cut -d' ' -f1)" != "$(ssh archlinux.org md5sum "${uploadto}" | cut -d' ' -f1)" ]; then
- echo "File got corrupted during upload, cancelled."
- exit 1
- else
- echo "File integrity okay."
- fi
-else
- if [ ! -f ~/.tupkg ]; then
- echo "Must configure tupkg via ~/.tupkg, cancelled"
- exit 1
- fi
- if [ "$(basename $pkgfile)" != "$(basename $oldstylepkgfile)" ]; then
- echo "Renaming makepkg3 package for compatability"
- mv $pkgfile $oldstylepkgfile
- pkgfile=$oldstylepkgfile
- fi
- tupkg $pkgfile
-fi
-if [ $? -ne 0 ]; then
- echo "Cancelled"
- exit 1
-fi
-echo "===> Uploaded $pkgfile"
-
-if [ "$1" != "" ]; then
- cvs commit -m "upgpkg: $pkgname $pkgver-$pkgrel
- $1" > /dev/null
- if [ $? -ne 0 ]; then
- echo "Cancelled"
- exit 1
- fi
- echo "===> Commited with \"upgpkg: $pkgname $pkgver-$pkgrel
- $1\" message"
-else
- cvs commit -m "upgpkg: $pkgname $pkgver-$pkgrel" > /dev/null
- if [ $? -ne 0 ]; then
- echo "Cancelled"
- exit 1
- fi
- echo "===> Commited with \"upgpkg: $pkgname $pkgver-$pkgrel\" message"
-fi
-
-cvs tag -c -F -R $tag > /dev/null
-if [ $? -ne 0 ]; then
- echo "Cancelled"
- exit 1
-fi
-echo "===> Tagged as $tag"
-
-# vim:ft=sh:ts=4:sw=4:et:
diff --git a/tupkg/client/tupkg b/tupkg/client/tupkg
deleted file mode 100755
index af7d0547..00000000
--- a/tupkg/client/tupkg
+++ /dev/null
@@ -1,216 +0,0 @@
-#!/usr/bin/python -O
-#
-# Description:
-# ------------
-# This is the client-side portion of the Trusted User package
-# manager. The TUs will use this program to upload packages into
-# the AUR. For more information, see the ../README.txt file.
-#
-# Python Indentation:
-# -------------------
-# For a vim: line to be effective, it must be at the end of the
-# file. See the end of the file for more information.
-#
-
-import sys
-import socket
-import os
-import struct
-import os.path
-import cgi
-import urllib
-import getopt
-import ConfigParser
-
-from hashlib import md5
-
-class ClientFile:
- def __init__(self, pathname):
- self.pathname = pathname
- self.filename = os.path.basename(pathname)
- self.fd = open(pathname, "rb")
- self.fd.seek(0, 2)
- self.size = self.fd.tell()
- self.fd.seek(0)
- self.makeMd5()
-
- def makeMd5(self):
- md5sum = md5()
- while self.fd.tell() != self.size:
- md5sum.update(self.fd.read(1024))
- self.md5 = md5sum.hexdigest()
-
-class ClientSocket:
- def __init__(self, files, host, port, username, password):
- self.files = files
- self.host = host
- self.port = port
- self.socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
- self.username = username
- self.password = password
-
- def connect(self):
- self.socket.connect((self.host, self.port))
-
- def reliableRead(self, size):
- totalread = ""
- while len(totalread) < size:
- read = self.socket.recv(size-len(totalread))
- if read == 0:
- raise RuntimeError, "socket connection broken"
- totalread += read
- return totalread
-
- def sendMsg(self, msg):
- if type(msg) == dict:
- msg = urllib.urlencode(msg,1)
- length = struct.pack("H", socket.htons(len(msg)))
- self.socket.sendall(length)
- self.socket.sendall(msg)
-
- def readMsg(self, format=0):
- initsize = self.reliableRead(2)
- (length,) = struct.unpack("H", initsize)
- length = socket.ntohs(length)
- data = self.reliableRead(length)
- if format == 1:
- qs = cgi.parse_qs(data)
- return qs
- else:
- return data
-
- def close(self):
- self.socket.close()
-
- def auth(self):
- msg = {'username': self.username, 'password': self.password}
- self.sendMsg(msg)
- reply = self.readMsg(1)
- if reply['result'] == ["PASS"]:
- return 1
- elif reply['result'] == ["SQLERR"]:
- print "SQL server-side error"
- return 0
- else:
- return 0
-
- def sendFileMeta(self):
- msg = {'numpkgs': len(self.files)}
- for i, v in enumerate(self.files):
- msg['name'+str(i)] = v.filename
- msg['size'+str(i)] = v.size
- msg['md5sum'+str(i)] = v.md5
- self.sendMsg(msg)
- reply = self.readMsg(1)
- print reply
- for i in reply:
- if i[:4] == 'size':
- self.files[int(i[4:])].cur_done = int(reply[i][0])
-
- def sendFiles(self):
- for i in self.files:
- i.fd.seek(i.cur_done)
- print "Uploading:", i.filename, str(i.size/1024), "kb"
- sdone = 0
- while i.fd.tell() < i.size:
- sdone+=1
- self.socket.sendall(i.fd.read(1024))
- if sdone % 100 == 0:
- print "\r",
- print str(sdone), "of", str(i.size/1024), "kb",
- sys.stdout.flush()
- reply = self.readMsg(1)
- print reply
- self.sendMsg("ack")
-
-def usage():
- print "usage: tupkg [options] <package file>"
- print "options:"
- print " -u, --user Connect with username"
- print " -P, --password Connect with password"
- print " -h, --host Connect to host"
- print " -p, --port Connect to host on port (default 1034)"
- print "May also use conf file: ~/.tupkg"
-
-def main(argv=None):
- if argv is None:
- argv = sys.argv
-
- confdict = {}
- conffile = os.path.join(os.getenv("HOME"),".tupkg") #try the standard location
- #Set variables from file now, may be overridden on command line
- if os.path.isfile(conffile):
- config = ConfigParser.ConfigParser()
- config.read(conffile)
- confdict['user'] = config.get('tupkg','username')
- confdict['password'] = config.get('tupkg','password')
- try:
- confdict['host'] = config.get('tupkg','host')
- except:
- confdict['host'] = 'aur.archlinux.org'
- try:
- confdict['port'] = config.getint('tupkg','port')
- except:
- confdict['port'] = 1034
- else:
- confdict['user'] = ""
- confdict['password'] = ""
- confdict['host'] = 'aur.archlinux.org'
- confdict['port'] = 1034
- if len(argv) == 1: #no config file and no args, bail
- usage()
- return 1
-
- try:
- optlist, args = getopt.getopt(argv[1:], "u:P:h:p:", ["user=", "password=", "host=", "port="])
- except getopt.GetoptError:
- usage()
- return 1
-
- for i, k in optlist:
- if i in ('-u', '--user'):
- confdict['user'] = k
- if i in ('-P', '--password'):
- confdict['password'] = k
- if i in ('-h', '--host'):
- confdict['host'] = k
- if i in ('-p', '--port'):
- confdict['port'] = int(k)
-
- files = []
- for i in args:
- try:
- files.append(ClientFile(i))
- except IOError, err:
- print "Error: " + err.strerror + ": '" + err.filename + "'"
- usage()
- return 1
-
- cs = ClientSocket(files, confdict['host'], confdict['port'], confdict['user'], confdict['password'])
- try:
- cs.connect()
-
- if not cs.auth():
- print "Error authenticating you, you bastard"
- return 1
-
- cs.sendFileMeta()
-
- cs.sendFiles()
-
- cs.close()
- except KeyboardInterrupt:
- print "Cancelling"
- cs.close()
-
- return 0
-
-if __name__ == "__main__":
- sys.exit(main())
-
-# Python Indentation:
-# -------------------
-# Use tabs not spaces. If you use vim, the following comment will
-# configure it to use tabs.
-#
-# vim:noet:ts=2 sw=2 ft=python
diff --git a/tupkg/scripts/run-tupkgs b/tupkg/scripts/run-tupkgs
deleted file mode 100755
index 429f815a..00000000
--- a/tupkg/scripts/run-tupkgs
+++ /dev/null
@@ -1,4 +0,0 @@
-#!/bin/bash
-aurroot=/srv/http/aur
-
-nohup $aurroot/aur/tupkg/server/tupkgs -c $aurroot/tupkgs.conf > $aurroot/tupkgs.log 2>&1 &
diff --git a/tupkg/scripts/run-tupkgupdate b/tupkg/scripts/run-tupkgupdate
deleted file mode 100755
index 955144a6..00000000
--- a/tupkg/scripts/run-tupkgupdate
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/bin/bash
-
-aurroot=/srv/http/aur
-
-# Set HOME for correct cvs auth.
-HOME=$aurroot
-
-echo "--------------------"
-date
-
-# Update the CVS tree.
-# Filter out useless output.
-cd $aurroot/cvs
-echo "Updating CVS..."
-cvs update -dP 2>&1 | grep -v "Updating"
-
-# tupkgupdate <repodir> <cvsdir> <incomingdir>
-$aurroot/aur/tupkg/update/tupkgupdate -c $aurroot/tupkgs.conf --delete --paranoid /srv/ftp/community/os/i686 $aurroot/cvs $aurroot/packages/full
-
diff --git a/tupkg/scripts/stop-tupkgs b/tupkg/scripts/stop-tupkgs
deleted file mode 100755
index b0e4c027..00000000
--- a/tupkg/scripts/stop-tupkgs
+++ /dev/null
@@ -1,3 +0,0 @@
-#!/bin/bash
-
-killall tupkgs
diff --git a/tupkg/server/tupkgs b/tupkg/server/tupkgs
deleted file mode 100755
index dab4e584..00000000
--- a/tupkg/server/tupkgs
+++ /dev/null
@@ -1,329 +0,0 @@
-#!/usr/bin/python -O
-#
-# Description:
-# ------------
-# This is the server-side portion of the Trusted User package
-# manager. This program will receive uploads from its client-side
-# couterpart, tupkg. Once a package is received and verified, it
-# is placed in a specified temporary incoming directory where
-# a separate script will handle migrating it to the AUR. For
-# more information, see the ../README.txt file.
-#
-# Python Indentation:
-# -------------------
-# For a vim: line to be effective, it must be at the end of the
-# file. See the end of the file for more information.
-
-import sys
-import socket
-import threading
-import select
-import struct
-import cgi
-import urllib
-import MySQLdb
-import MySQLdb.connections
-import ConfigParser
-import getopt
-import os.path
-import os
-import time
-from hashlib import md5
-
-CONFIGFILE = '/etc/tupkgs.conf'
-
-config = ConfigParser.ConfigParser()
-
-class ClientFile:
- def __init__(self, filename, actual_size, actual_md5):
- self.pathname = os.path.join(confdict['incomingdir'], filename)
- self.filename = filename
- self.fd = open(self.pathname, "a+b")
- self.actual_size = actual_size
- self.actual_md5 = actual_md5
- self.getSize()
- self.orig_size = self.size
-
- def getSize(self):
- cur = self.fd.tell()
- self.fd.seek(0,2)
- self.size = self.fd.tell()
- self.fd.seek(cur)
-
- def makeMd5(self):
- m = md5();
- cur = self.fd.tell()
- self.getSize()
- self.fd.seek(0)
- while self.fd.tell() != self.size:
- m.update(self.fd.read(1024))
- self.fd.seek(cur)
- self.md5 = m.hexdigest()
-
- def finishDownload(self):
- self.fd.close()
- newpathname = os.path.join(confdict['cachedir'], self.filename)
- os.rename(self.pathname, newpathname)
- self.pathname = newpathname
- self.fd = open(self.pathname, "a+b")
-
- def delete(self):
- self.fd.close()
- os.remove(self.pathname)
-
-class ClientSocket(threading.Thread):
- def __init__(self, sock, **other):
- threading.Thread.__init__(self, *other)
- self.socket = sock
- self.running = 1
- self.files = []
-
- def close(self):
- self.running = 0
-
- def reliableRead(self, size):
- totalread = ""
- while len(totalread) < size:
- read = self.socket.recv(size-len(totalread))
- if len(read) == 0:
- raise RuntimeError, "socket connection broken"
- totalread += read
- return totalread
-
- def sendMsg(self, msg):
- if type(msg) == dict:
- msg = urllib.urlencode(msg,1)
- length = struct.pack("H", socket.htons(len(msg)))
- self.socket.sendall(length)
- self.socket.sendall(msg)
-
- def readMsg(self, format=0):
- initsize = self.reliableRead(2)
- (length,) = struct.unpack("H", initsize)
- length = socket.ntohs(length)
- data = self.reliableRead(length)
- if format == 1:
- qs = cgi.parse_qs(data)
- return qs
- else:
- return data
-
- def auth(self):
- authdata = self.readMsg(1)
-
- if (authdata.has_key('username')):
- print "Trying connection for user %s" % authdata['username']
-
- if (not authdata.has_key('username')) or (not authdata.has_key('password')):
- self.sendMsg("result=FAIL")
- return 0
-
- print "Connecting to MySQL database"
- dbconn = MySQLdb.connect(host=config.get('mysql', 'host'),
- user=config.get('mysql', 'username'),
- passwd=config.get('mysql', 'password'),
- db=config.get('mysql', 'db'))
-
- q = dbconn.cursor()
- m = md5();
- m.update(authdata['password'][0])
- encpw = m.hexdigest()
- try:
- q.execute("SELECT ID, Suspended, AccountTypeID FROM Users WHERE Username = '"+
- MySQLdb.escape_string(authdata['username'][0])+
- "' AND Passwd = '"+
- MySQLdb.escape_string(encpw)+
- "'")
- dbconn.close()
- except :
- self.sendMsg("result=SQLERR")
- return 0
- if q.rowcount == 0:
- self.sendMsg("result=FAIL")
- return 0
- row = q.fetchone()
- if row[1] != 0:
- self.sendMsg("result=FAIL")
- return 0
- if row[2] not in (2, 3):
- self.sendMsg("result=FAIL")
- return 0
- self.sendMsg("result=PASS")
- return 1
-
- def readFileMeta(self):
- files = self.readMsg(1)
- print files
- # Actually do file checking, et al
- for i in range(int(files['numpkgs'][0])):
- self.files.append(ClientFile(files['name'+str(i)][0], int(files['size'+str(i)][0]), files['md5sum'+str(i)][0]))
- new_files = files.copy()
- for i in files:
- if i[:4] == 'size':
- clientfile = self.files[int(i[4:])]
- new_files[i] = str(clientfile.orig_size)
- if i[:6] == 'md5sum':
- del new_files[i]
- self.sendMsg(new_files)
-
- def readFiles(self):
- for i in self.files:
- count = i.orig_size
- while count != i.actual_size:
- if count + 1024 > i.actual_size:
- i.fd.write(self.reliableRead(i.actual_size - count))
- count += i.actual_size - count
- else:
- i.fd.write(self.reliableRead(1024))
- count += 1024
- i.fd.flush()
- reply = {'numpkgs': len(self.files)}
- for i, v in enumerate(self.files):
- v.makeMd5()
- if v.actual_md5 == v.md5:
- reply['md5sum'+str(i)] = "PASS"
- v.finishDownload()
- else:
- reply['md5sum'+str(i)] = "FAIL"
- v.delete()
- self.sendMsg(reply)
- print self.readMsg()
-
- def run(self):
- try:
- if not self.auth():
- print "Error authenticating."
- self.close()
- return
- self.readFileMeta()
- self.readFiles()
- except RuntimeError, err:
- if err.__str__() == "socket connection broken":
- print "Client disconnected, cleaning up"
- self.close()
- return
-
-class ServerSocket(threading.Thread):
- def __init__(self, port, maxqueue, **other):
- threading.Thread.__init__(self, *other)
- self.running = 1
- self.socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
- self.socket.bind(('', port))
- self.socket.listen(maxqueue)
- self.clients = []
-
- def _clean(self, client):
- if not client.isAlive():
- return 0
- return 1
-
- def close(self):
- self.socket.close()
- self.running = 0
-
- def run(self):
- while self.running:
- sread, swrite, serror = select.select([self.socket],[self.socket],[self.socket],1)
- if sread:
- (clientsocket, address) = self.socket.accept()
- print time.asctime(time.gmtime())
- print "New connection from " + str(address)
- ct = ClientSocket(clientsocket)
- ct.start()
- self.clients.append(ct)
-
- self.clients = filter(self._clean, self.clients)
- self.socket.close()
- [x.close() for x in self.clients]
- [x.join() for x in self.clients]
-
-def usage(name):
- print "usage: " + name + " [options]"
- print "options:"
- print " -c, --config Specify an alternate config file (default " + CONFIGFILE + ")"
-
-def getDefaultConfig():
- confdict = {}
- confdict['port'] = 1034
- confdict['cachedir'] = '/var/cache/tupkgs/'
- confdict['incomingdir'] = '/var/cache/tupkgs/incomplete/'
- confdict['maxqueue'] = 5
-
- return confdict
-
-
-confdict = getDefaultConfig()
-
-def main(argv=None):
- if argv is None:
- argv = sys.argv
-
- try:
- optlist, args = getopt.getopt(argv[1:], "c:", ["config="])
- except getopt.GetoptError:
- usage(argv[0])
- return 1
-
- conffile = CONFIGFILE
-
- for i, k in optlist:
- if i in ('-c', '--config'):
- conffile = k
-
- if not os.path.isfile(conffile):
- print "Error: cannot access config file ("+conffile+")"
- usage(argv[0])
- return 1
-
- config.read(conffile)
-
- running = 1
-
- print "Parsing config file"
- if config.has_section('tupkgs'):
- if config.has_option('tupkgs', 'port'):
- confdict['port'] = config.getint('tupkgs', 'port')
- if config.has_option('tupkgs', 'maxqueue'):
- confdict['maxqueue'] = config.getint('tupkgs', 'maxqueue')
- if config.has_option('tupkgs', 'cachedir'):
- confdict['cachedir'] = config.get('tupkgs', 'cachedir')
- if config.has_option('tupkgs', 'incomingdir'):
- confdict['incomingdir'] = config.get('tupkgs', 'incomingdir')
-
- print "Verifying "+confdict['cachedir']+" and "+confdict['incomingdir']+" exist"
- if not os.path.isdir(confdict['cachedir']):
- print "Creating "+confdict['cachedir']
- os.mkdir(confdict['cachedir'], 0755)
- if not os.path.isdir(confdict['incomingdir']):
- print "Creating "+confdict['incomingdir']
- os.mkdir(confdict['incomingdir'], 0755)
-
- print "Starting ServerSocket"
- servsock = ServerSocket(confdict['port'], confdict['maxqueue'])
- servsock.start()
-
- try:
- while running:
- # Maybe do stuff here?
- time.sleep(10)
- except KeyboardInterrupt:
- running = 0
-
- print "Waiting for threads to die"
-
- servsock.close()
-
- servsock.join()
-
-
- return 0
-
-if __name__ == "__main__":
- sys.exit(main())
-
-# Python Indentation:
-# -------------------
-# Use tabs not spaces. If you use vim, the following comment will
-# configure it to use tabs.
-#
-# vim:noet:ts=2 sw=2 ft=python
diff --git a/tupkg/server/tupkgs.conf b/tupkg/server/tupkgs.conf
deleted file mode 100644
index dcbc6795..00000000
--- a/tupkg/server/tupkgs.conf
+++ /dev/null
@@ -1,10 +0,0 @@
-[tupkgs]
-port = 1034
-cachedir = /var/cache/tupkgs
-incomingdir = /var/cache/tupkgs/incomplete
-
-[mysql]
-username = aur
-password = aur
-host = localhost
-db = AUR
diff --git a/tupkg/update/tupkgupdate b/tupkg/update/tupkgupdate
deleted file mode 100755
index 63314d48..00000000
--- a/tupkg/update/tupkgupdate
+++ /dev/null
@@ -1,622 +0,0 @@
-#!/usr/bin/python -O
-
-import re
-import os
-import sys
-import pacman
-import getopt
-import MySQLdb
-import MySQLdb.connections
-import ConfigParser
-from subprocess import Popen, PIPE
-
-###########################################################
-# Deal with configuration
-###########################################################
-
-conffile = '/etc/tupkgs.conf'
-
-config = ConfigParser.ConfigParser()
-
-############################################################
-
-# Define some classes we need
-class Version:
- def __init__(self):
- self.version = None
- self.file = None
-
-class Package:
- def __init__(self):
- self.name = None
- self.category = None
- self.old = None
- self.new = None
- self.desc = None
- self.url = None
- self.depends = None
- self.sources = None
-
-class PackageDatabase:
- def __init__(self, host, user, password, dbname):
- self.host = host
- self.user = user
- self.password = password
- self.dbname = dbname
- self.connection = MySQLdb.connect(host=host, user=user, passwd=password, db=dbname)
-
- def cursor(self):
- try:
- self.connection.ping()
- except MySQLdb.OperationalError:
- self.connection = MySQLdb.connect(host=self.host, user=self.user, passwd=self.password, db=self.dbname)
- return self.connection.cursor()
-
- def lookup(self, packagename):
- warning("DB: Looking up package: " + packagename)
- q = self.cursor()
- q.execute("SELECT ID FROM Packages WHERE Name = '" +
- MySQLdb.escape_string(packagename) + "'")
- if (q.rowcount != 0):
- row = q.fetchone()
- return row[0]
- return None
-
- def getCategoryID(self, package):
- category_id = self.lookupCategory(package.category)
- if (category_id == None):
- category_id = 1
- warning("DB: Got category ID '" + str(category_id) + "' for package '" + package.name + "'")
- return category_id
-
- def insert(self, package, locationId):
- warning("DB: Inserting package: " + package.name)
- global repo_dir
- q = self.cursor()
- q.execute("INSERT INTO Packages " +
- "(Name, CategoryID, Version, FSPath, LocationID, SubmittedTS, Description, URL) VALUES ('" +
- MySQLdb.escape_string(package.name) + "', " +
- str(self.getCategoryID(package)) + ", '" +
- MySQLdb.escape_string(package.new.version) + "', '" +
- MySQLdb.escape_string(
- os.path.join(repo_dir, os.path.basename(package.new.file))) + "', " +
- str(locationId) + ", " +
- "UNIX_TIMESTAMP(), '" +
- MySQLdb.escape_string(str(package.desc)) + "', '" +
- MySQLdb.escape_string(str(package.url)) + "')")
- id = self.lookup(package.name)
- self.insertNewInfo(package, id, locationId)
-
- def update(self, id, package, locationId):
- warning("DB: Updating package: " + package.name + " with id " + str(id))
- global repo_dir
- q = self.cursor()
- if (self.isdummy(package.name)):
- q.execute("UPDATE Packages SET " +
- "Version = '" + MySQLdb.escape_string(package.new.version) + "', " +
- "CategoryID = " + str(self.getCategoryID(package)) + ", " +
- "FSPath = '" + MySQLdb.escape_string(
- os.path.join(repo_dir, os.path.basename(package.new.file))) + "', " +
- "Description = '" + MySQLdb.escape_string(str(package.desc)) + "', " +
- "DummyPkg = 0, " +
- "SubmittedTS = UNIX_TIMESTAMP(), " +
- "URL = '" + MySQLdb.escape_string(str(package.url)) + "' " +
- "WHERE ID = " + str(id))
- else:
- q.execute("UPDATE Packages SET " +
- "Version = '" + MySQLdb.escape_string(package.new.version) + "', " +
- "CategoryID = " + str(self.getCategoryID(package)) + ", " +
- "FSPath = '" + MySQLdb.escape_string(
- os.path.join(repo_dir, os.path.basename(package.new.file))) + "', " +
- "Description = '" + MySQLdb.escape_string(str(package.desc)) + "', " +
- "ModifiedTS = UNIX_TIMESTAMP(), " +
- "URL = '" + MySQLdb.escape_string(str(package.url)) + "' " +
- "WHERE ID = " + str(id))
- self.insertNewInfo(package, id, locationId)
-
- # Check to see if this is a move of a package from unsupported
- # to community, because we have to reset maintainer and location.
-
- q = self.cursor()
- q.execute("SELECT LocationID FROM Packages WHERE ID = " + str(id))
- if (q.rowcount != 0):
- row = q.fetchone()
- if (row[0] != 3):
- q = self.cursor()
- q.execute("UPDATE Packages SET LocationID = 3, MaintainerUID = null WHERE ID = " + str(id))
-
- def remove(self, id, locationId):
- warning("DB: Removing package with id: " + str(id))
- q = self.cursor()
- q.execute("DELETE FROM Packages WHERE " +
- "LocationID = " + str(locationId) + " AND ID = " + str(id))
-
- def clearOldInfo(self, id):
- warning("DB: Clearing old info for package with id : " + str(id))
- q = self.cursor()
- q.execute("DELETE FROM PackageContents WHERE PackageID = " + str(id))
- q.execute("DELETE FROM PackageDepends WHERE PackageID = " + str(id))
- q.execute("DELETE FROM PackageSources WHERE PackageID = " + str(id))
-
- def lookupOrDummy(self, packagename):
- retval = self.lookup(packagename)
- if (retval != None):
- return retval
- return self.createDummy(packagename)
-
- def lookupCategory(self, categoryname):
- warning("DB: Looking up category: " + categoryname)
- q = self.cursor()
- q.execute("SELECT ID from PackageCategories WHERE Category = '" + MySQLdb.escape_string(categoryname) + "'")
- if (q.rowcount != 0):
- row = q.fetchone()
- return row[0]
- return None
-
- def createDummy(self, packagename):
- warning("DB: Creating dummy package for: " + packagename)
- q = self.cursor()
- q.execute("INSERT INTO Packages " +
- "(Name, Description, LocationID, DummyPkg) " +
- "VALUES ('" +
- MySQLdb.escape_string(packagename) + "', '" +
- MySQLdb.escape_string("A dummy package") + "', 1, 1)")
- return self.lookup(packagename)
-
- def insertNewInfo(self, package, id, locationId):
- q = self.cursor()
-
- # First delete the old.
- self.clearOldInfo(id)
-
- warning("DB: Inserting new package info for " + package.name +
- " with id " + str(id))
-
- # PackageSources
- for source in package.sources:
- q.execute("INSERT INTO PackageSources (PackageID, Source) " +
- "VALUES (" + str(id) + ", '" + MySQLdb.escape_string(source) + "')")
-
- # PackageDepends
- for dep in package.depends:
- depid = self.lookupOrDummy(dep)
- q.execute("INSERT INTO PackageDepends (PackageID, DepPkgID) " +
- "VALUES (" + str(id) + ", " + str(depid) + ")")
-
- def isdummy(self, packagename):
- warning("DB: Looking up package: " + packagename)
- q = self.cursor()
- q.execute("SELECT * FROM Packages WHERE Name = '" +
- MySQLdb.escape_string(packagename) + "' AND DummyPkg = 1")
- if (q.rowcount != 0):
- return True
- return False
-
-############################################################
-# Functions for walking the file trees
-############################################################
-
-def filesForRegexp(topdir, regexp):
- retval = []
- def matchfile(regexp, dirpath, namelist):
- for name in namelist:
- if (regexp.match(name)):
- retval.append(os.path.join(dirpath, name))
- os.path.walk(topdir, matchfile, regexp)
- return retval
-
-def packagesInTree(topdir):
- return filesForRegexp(topdir, re.compile("^.*\.pkg\.tar\.gz$"))
-
-def pkgbuildsInTree(topdir):
- return filesForRegexp(topdir, re.compile("^PKGBUILD$"))
-
-############################################################
-# Function for testing if two files are identical
-############################################################
-
-def areFilesIdentical(file_a, file_b):
- command = "cmp '" + file_a + "' '" + file_b + "' >/dev/null"
- retval = os.system(command)
- if (retval == 0):
- return True
- return False
-
-############################################################
-# Function for fetching info from PKGBUILDs and packages
-############################################################
-
-def infoFromPackageFile(filename):
- pkg = os.path.basename(filename)
- m = re.compile("(?P<pkgname>.*)-(?P<pkgver>.*)-(?P<pkgrel>.*).pkg.tar.gz").search(pkg)
- if not m:
- raise Exception("Non-standard filename")
- else:
- return m.group('pkgname'), m.group('pkgver') + "-" + m.group('pkgrel')
-
-def infoFromPkgbuildFile(filename):
- # first grab the category based on the file path
- pkgdirectory = os.path.dirname(filename)
- catdirectory = os.path.dirname(pkgdirectory)
- m = re.match(r".*/([^/]+)$", catdirectory)
- if (m):
- category = m.group(1)
- else:
- category = "none"
-
- # open and source the file
- pf = Popen("/bin/bash",
- shell=True, bufsize=0, stdin=PIPE, stdout=PIPE, close_fds=True)
-
- print >>pf.stdin, ". " + filename
- #print "PKGBUILD: " + filename
-
- # get pkgname
- print >>pf.stdin, 'echo $pkgname'
- pkgname = pf.stdout.readline().strip()
-
- #print "PKGBUILD: pkgname: " + pkgname
-
- # get pkgver
- print >>pf.stdin, 'echo $pkgver'
- pkgver = pf.stdout.readline().strip()
- #print "PKGBUILD: pkgver: " + pkgver
-
- # get pkgrel
- print >>pf.stdin, 'echo $pkgrel'
- pkgrel = pf.stdout.readline().strip()
- #print "PKGBUILD: pkgrel: " + pkgrel
-
- # get url
- print >>pf.stdin, 'echo $url'
- url = pf.stdout.readline().strip()
- #print "PKGBUILD: url: " + url
-
- # get desc
- print >>pf.stdin, 'echo $pkgdesc'
- pkgdesc = pf.stdout.readline().strip()
- #print "PKGBUILD: pkgdesc: " + pkgdesc
-
- # get source array
- print >>pf.stdin, 'echo ${source[*]}'
- source = (pf.stdout.readline().strip()).split(" ")
-
- # get depends array
- print >>pf.stdin, 'echo ${depends[*]}'
- depends = (pf.stdout.readline().strip()).split(" ")
-
- # clean up
- pf.stdin.close()
- pf.stdout.close()
-
- return pkgname, pkgver + "-" + pkgrel, pkgdesc, url, depends, source, category
-
-def infoFromPkgbuildFileWorse(filename):
- # load the file with pacman library
- pkg = pacman.load(filename)
- return (pkg.name, pkg.version + "-" + pkg.release, pkg.desc,
- pkg.url, pkg.depends, pkg.source)
-
-############################################################
-# Functions for doing the final steps of execution
-############################################################
-
-def execute(command):
- global switches
- print(command)
- if not (switches.get("-n") == True):
- return os.system(command)
- return 0
-
-def copyFileToRepo(filename, repodir):
- destfile = os.path.join(repodir, os.path.basename(filename))
- command = "cp --preserve=timestamps '" + filename + "' '" + destfile + "'"
- return execute(command)
-
-def deleteFile(filename):
- command = "rm '" + filename + "'"
- return execute(command)
-
-def runRepoAdd(repo, package):
- global havefakeroot
- targetDB = os.path.join(repo, "community.db.tar.gz")
- destfile = os.path.join(repo, os.path.basename(package.new.file))
- if havefakeroot:
- command = "fakeroot repo-add '" + targetDB + "' '" + destfile + "'"
- else:
- command = "repo-add '" + targetDB + "' '" + destfile + "'"
- return execute(command)
-
-def runRepoRemove(repo, pkgname):
- global havefakeroot
- targetDB = os.path.join(repo, "community.db.tar.gz")
- if havefakeroot:
- command = "fakeroot repo-remove '" + targetDB + "' '"+ pkgname + "'"
- else:
- command = "repo-remove '" + targetDB + "' '" + pkgname +"'"
- return execute(command)
-
-############################################################
-# Functions for error handling
-############################################################
-
-def warning(string):
- print >>sys.stderr, string
-
-had_error = 0
-def error(string):
- global had_error
- warning(string)
- had_error = 1
-
-def usage(name):
- print "Usage: %s [options] <repo_dir> <pkgbuild_tree> <build_tree>" % name
- print "Options:"
- print " -c, --config Specify a path to the config file."
- print " -n Don't actually perform any action on the repo."
- print " --delete Delete duplicate and temporary pkgs."
- print " --paranoid Warn of duplicate pkgs that aren't identical."
- sys.exit(1)
-
-############################################################
-# MAIN
-############################################################
-
-# ARGUMENTS
-# See usage() for specifying arguments.
-
-try:
- optlist, args = getopt.getopt(sys.argv[1:], 'c:n',
- ['config=', 'delete', 'paranoid'])
-except getopt.GetoptError:
- usage(sys.argv[0])
-
-switches = {}
-for opt in optlist:
- switches[opt[0]] = 1
-
-# Check for required arguments.
-if (len(args) < 3):
- usage(sys.argv[0])
-
-for opt, value in optlist:
- if opt in ('-c', '--config'):
- conffile = value
-
-try:
- repo_dir, pkgbuild_dir, build_dir = args
-except ValueError:
- usage(sys.argv[0])
-
-if not os.path.isfile(conffile):
- print "Error: cannot access config file (%s)" % conffile
- sys.exit(1)
-
-config.read(conffile)
-config_use_db = config.has_section('mysql')
-
-# Make sure we can use fakeroot, warn if not
-havefakeroot = False
-if os.access('/usr/bin/fakeroot', os.X_OK):
- havefakeroot = True
-else:
- warning("Not using fakeroot for repo db generation")
-
-# Open the database if we need it so we find out now if we can't!
-if config_use_db:
- try:
- db = PackageDatabase(config.get('mysql', 'host'),
- config.get('mysql', 'username'),
- config.get('mysql', 'password'),
- config.get('mysql', 'db'))
- except:
- print "Error: Could not connect to the database %s at %s." % (
- config.get('mysql', 'db'), config.get('mysql', 'host'))
- sys.exit(1)
-
-# Set up the lists and tables
-packages = dict()
-copy = list()
-delete = list()
-
-dbremove = list()
-dbmodify = list()
-
-# PASS 1: PARSING/LOCATING
-#
-# A) Go through the PKGBUILD tree
-# For each PKGBUILD, create a Package with new Version containing
-# parsed version and and None for file
-
-a_files = pkgbuildsInTree(pkgbuild_dir)
-for a_file in a_files:
- pkgname, ver, desc, url, depends, sources, category = infoFromPkgbuildFile(a_file)
-
- # Error (and skip) if we encounter any invalid PKGBUILD files
- if (pkgname == None or ver == None):
- error("Pkgbuild '" + a_file + "' is invalid!")
- continue
-
- # Error (and skip) if we encounter any duplicate package names
- # in the PKGBUILDs
- if (packages.get(pkgname)):
- error("Pkgbuild '" + a_file + "' is a duplicate!")
- continue
-
- version = Version()
- version.version = ver
- version.file = None
-
- package = Package()
- package.name = pkgname
- package.category = category
- package.desc = desc
- package.url = url
- package.depends = depends
- package.sources = sources
- package.new = version
-
-# print "Package: desc " + desc
-
- packages[pkgname] = package
-
-# B) Go through the old repo dir
-# For each package file we encounter, create a Package with old
-# Version containing parsed version and filepath
-
-b_files = packagesInTree(repo_dir)
-for b_file in b_files:
- pkgname, ver = infoFromPackageFile(b_file)
-
- version = Version()
- version.version = ver
- version.file = b_file
-
- package = packages.get(pkgname)
- if (package == None):
- package = Package()
- package.name = pkgname
- packages[pkgname] = package
- package.old = version
-
-# C) Go through the build tree
-# For each package file we encounter:
-# 1 - look up the package name; if it fails, ignore the file (no error)
-# 2 - if package.new == None, ignore the package (no error)
-# 3 - if package.new.version doesn't match, then skip (no error)
-# 4 - if package.new.file == None, point it to this file
-# otherwise, log an error (and skip)
-
-c_files = packagesInTree(build_dir)
-for c_file in c_files:
- pkgname, ver = infoFromPackageFile(c_file)
-
- # 1
- package = packages.get(pkgname)
- if (package == None):
- continue
-
- # 2
- if (package.new == None):
- continue
-
- # 3
- if (package.new.version != ver):
- continue
-
- # 4
- if (package.new.file == None):
- package.new.file = c_file
- continue
- else:
- error("Duplicate new file '" + c_file + "'")
- continue
-
-# PASS 2: CHECKING
-#
-# Go through the package collection
-# 1 - if package has no new, place its old file on the "delete" list (and package on "dbremove")
-# 2 - if package has a new but no new.file, and old file doesn't
-# have the same version, then error (because gensync won't rebuild)
-# 3 - if package has no old, add new file to "copy" list into repo dir (and package on "dbmodify")
-# 4 - if new == old and paranoid is set, compare the files and error if not the same;
-# otherwise just skip (no update)
-# 5 - if we got here, it's a legit nontrivial new version which we allow
-# add entry to "delete" list for old file and "copy" list for
-# new file into repo dir (and package to "dbmodify")
-
-for package in packages.values():
- # 1
- if (package.new == None):
- delete.append(package.old.file)
- dbremove.append(package)
- continue
-
- # 2
- if (package.new.file == None):
- if (package.old == None or package.old.file == None or
- package.old.version != package.new.version):
- errstr = "No new package supplied for " + package.name + " " + package.new.version + "!"
- error(errstr)
- continue
-
- # 3
- if (package.old == None):
- copy.append(package.new.file)
- dbmodify.append(package)
- continue
-
- # 4
- if (package.old.version == package.new.version):
- if (switches.get("--paranoid") == True and package.new.file != None):
- if not (areFilesIdentical(package.old.file, package.new.file)):
- warning("New package file with identical version '" +
- package.new.file + "' is different than the old one:")
- if (switches.get("--delete") == True):
- warning(" Deleting the new file.")
- delete.append(package.new.file)
- else:
- warning(" Ignoring the new file.")
- continue
-
- # 5
- delete.append(package.old.file)
- copy.append(package.new.file)
- dbmodify.append(package)
- continue
-
-## IF WE HAVE HAD ANY ERRORS AT THIS POINT, ABORT! ##
-if (had_error == 1):
- error("Aborting due to errors.")
- sys.exit(-1)
-
-# PASS 3: EXECUTION
-#
-
-if config_use_db:
- # First, do all the database updates if asked for
- for package in dbremove:
- id = db.lookup(package.name)
- # Note: this could remove a package from unsupported; probably want to restrict to locationId and/or non-dummy
- if (id != None):
- db.clearOldInfo(id)
- db.remove(id, 3)
-
- for package in dbmodify:
- warning("DB: Package in dbmodify: " + package.name)
- id = db.lookup(package.name)
- if (id == None):
- db.insert(package, 3)
- else:
- db.update(id, package, 3)
-
-# Copy
-for file in copy:
- retval = copyFileToRepo(file, repo_dir)
- if (retval != 0):
- error("Could not copy file to repo: '" + file + "'")
- sys.exit(-1)
-
-# Delete (second, for safety's sake)
-for file in delete:
- deleteFile(file)
-
-# Now that we've copied new files and deleted, we should delete the source
-# files, if we're supposed to
-if (switches.get("--delete") == True):
- for file in copy:
- deleteFile(file)
-
-# Run updatesync where it is needed
-for package in dbremove:
- retval = runRepoRemove(repo_dir, package.name)
- if (retval != 0):
- error("repo-remove returned an error!")
- sys.exit(-1)
-for package in dbmodify:
- retval = runRepoAdd(repo_dir, package)
- if (retval != 0):
- error("repo-add returned an error!")
- sys.exit(-1)
-
-# vim: ft=python ts=2 sw=2 et
diff --git a/tupkg/update/tupkgupdate-lite b/tupkg/update/tupkgupdate-lite
deleted file mode 100755
index 51e40917..00000000
--- a/tupkg/update/tupkgupdate-lite
+++ /dev/null
@@ -1,513 +0,0 @@
-#!/usr/bin/python -O
-
-import re
-import os
-import sys
-import pacman
-import getopt
-import glob
-import MySQLdb
-import MySQLdb.connections
-import ConfigParser
-
-###########################################################
-# Deal with configuration
-###########################################################
-
-conffile = '/etc/tupkgs.conf'
-
-if not os.path.isfile(conffile):
- print "Error: cannot access config file ("+conffile+")"
- usage(argv[0])
- sys.exit(1)
-
-config = ConfigParser.ConfigParser()
-config.read(conffile)
-
-############################################################
-
-# Define some classes we need
-class Version:
- def __init__(self):
- self.version = None
- self.file = None
-
-class Package:
- def __init__(self):
- self.name = None
- self.category = None
- self.old = None
- self.new = None
- self.desc = None
- self.url = None
- self.depends = None
- self.sources = None
-
-class PackageDatabase:
- def __init__(self, host, user, password, dbname):
- self.host = host
- self.user = user
- self.password = password
- self.dbname = dbname
- self.connection = MySQLdb.connect(host=host, user=user, passwd=password, db=dbname)
- def cursor(self):
- return self.connection.cursor()
- def lookup(self, packagename):
- warning("DB: Looking up package: " + packagename)
- q = self.cursor()
- q.execute("SELECT ID FROM Packages WHERE Name = '" +
- MySQLdb.escape_string(packagename) + "'")
- if (q.rowcount != 0):
- row = q.fetchone()
- return row[0]
- return None
- def getCategoryID(self, package):
- category_id = self.lookupCategory(package.category)
- if (category_id == None):
- category_id = 1
- warning("DB: Got category ID '" + str(category_id) + "' for package '" + package.name + "'")
- return category_id
- def insert(self, package, locationId):
- warning("DB: Inserting package: " + package.name)
- global repo_dir
- q = self.cursor()
- q.execute("INSERT INTO Packages " +
- "(Name, CategoryID, Version, FSPath, LocationID, SubmittedTS, Description, URL) VALUES ('" +
- MySQLdb.escape_string(package.name) + "', " +
- str(self.getCategoryID(package)) + ", '" +
- MySQLdb.escape_string(package.new.version) + "', '" +
- MySQLdb.escape_string(
- os.path.join(repo_dir, os.path.basename(package.new.file))) + "', " +
- str(locationId) + ", " +
- "UNIX_TIMESTAMP(), '" +
- MySQLdb.escape_string(str(package.desc)) + "', '" +
- MySQLdb.escape_string(str(package.url)) + "')")
- id = self.lookup(package.name)
- self.insertNewInfo(package, id, locationId)
- def update(self, id, package, locationId):
- warning("DB: Updating package: " + package.name + " with id " + str(id))
- global repo_dir
- q = self.cursor()
- if (self.isdummy(package.name)):
- q.execute("UPDATE Packages SET " +
- "Version = '" + MySQLdb.escape_string(package.new.version) + "', " +
- "CategoryID = " + str(self.getCategoryID(package)) + ", " +
- "FSPath = '" + MySQLdb.escape_string(
- os.path.join(repo_dir, os.path.basename(package.new.file))) + "', " +
- "Description = '" + MySQLdb.escape_string(str(package.desc)) + "', " +
- "DummyPkg = 0, " +
- "SubmittedTS = UNIX_TIMESTAMP(), " +
- "URL = '" + MySQLdb.escape_string(str(package.url)) + "' " +
- "WHERE ID = " + str(id))
- else:
- q.execute("UPDATE Packages SET " +
- "Version = '" + MySQLdb.escape_string(package.new.version) + "', " +
- "CategoryID = " + str(self.getCategoryID(package)) + ", " +
- "FSPath = '" + MySQLdb.escape_string(
- os.path.join(repo_dir, os.path.basename(package.new.file))) + "', " +
- "Description = '" + MySQLdb.escape_string(str(package.desc)) + "', " +
- "ModifiedTS = UNIX_TIMESTAMP(), " +
- "URL = '" + MySQLdb.escape_string(str(package.url)) + "' " +
- "WHERE ID = " + str(id))
- self.insertNewInfo(package, id, locationId)
- # we must lastly check to see if this is a move of a package from
- # unsupported to community, because we'd have to reset maintainer and location
- q = self.cursor()
- q.execute("SELECT LocationID FROM Packages WHERE ID = " + str(id))
- if (q.rowcount != 0):
- row = q.fetchone()
- if (row[0] != 3):
- q = self.cursor()
- q.execute("UPDATE Packages SET LocationID = 3, MaintainerUID = null WHERE ID = " + str(id))
- def remove(self, id, locationId):
- warning("DB: Removing package with id: " + str(id))
- q = self.cursor()
- q.execute("DELETE FROM Packages WHERE " +
- "LocationID = " + str(locationId) + " AND ID = " + str(id))
- def clearOldInfo(self, id):
- warning("DB: Clearing old info for package with id : " + str(id))
- q = self.cursor()
- q.execute("DELETE FROM PackageContents WHERE PackageID = " + str(id))
- q.execute("DELETE FROM PackageDepends WHERE PackageID = " + str(id))
- q.execute("DELETE FROM PackageSources WHERE PackageID = " + str(id))
- def lookupOrDummy(self, packagename):
- retval = self.lookup(packagename)
- if (retval != None):
- return retval
- return self.createDummy(packagename)
- def lookupCategory(self, categoryname):
- warning("DB: Looking up category: " + categoryname)
- q = self.cursor()
- q.execute("SELECT ID from PackageCategories WHERE Category = '" + MySQLdb.escape_string(categoryname) + "'")
- if (q.rowcount != 0):
- row = q.fetchone()
- return row[0]
- return None
- def createDummy(self, packagename):
- warning("DB: Creating dummy package for: " + packagename)
- q = self.cursor()
- q.execute("INSERT INTO Packages " +
- "(Name, Description, LocationID, DummyPkg) " +
- "VALUES ('" +
- MySQLdb.escape_string(packagename) + "', '" +
- MySQLdb.escape_string("A dummy package") + "', 1, 1)")
- return self.lookup(packagename)
- def insertNewInfo(self, package, id, locationId):
- q = self.cursor()
-
- # first delete the old; this is never bad
- self.clearOldInfo(id)
-
- warning("DB: Inserting new package info for " + package.name +
- " with id " + str(id))
-
- # PackageSources
- for source in package.sources:
- q.execute("INSERT INTO PackageSources (PackageID, Source) " +
- "VALUES (" + str(id) + ", '" + source + "')")
- # PackageDepends
- for dep in package.depends:
- depid = self.lookupOrDummy(dep)
- q.execute("INSERT INTO PackageDepends (PackageID, DepPkgID) " +
- "VALUES (" + str(id) + ", " + str(depid) + ")")
- def isdummy(self, packagename):
- warning("DB: Looking up package: " + packagename)
- q = self.cursor()
- q.execute("SELECT * FROM Packages WHERE Name = '" +
- MySQLdb.escape_string(packagename) + "' AND DummyPkg = 1")
- if (q.rowcount != 0):
- return True
- return False
-
-############################################################
-# Functions for walking the file trees
-############################################################
-
-def filesForRegexp(topdir, regexp):
- retval = []
- def matchfile(regexp, dirpath, namelist):
- for name in namelist:
- if (regexp.match(name)):
- retval.append(os.path.join(dirpath, name))
- os.path.walk(topdir, matchfile, regexp)
- return retval
-
-def packagesInTree(topdir):
- return filesForRegexp(topdir, re.compile("^.*\.pkg\.tar\.gz$"))
-
-def pkgbuildsInTree(topdir):
- return filesForRegexp(topdir, re.compile("^PKGBUILD$"))
-
-############################################################
-# Function for testing if two files are identical
-############################################################
-
-def areFilesIdentical(file_a, file_b):
- command = "cmp '" + file_a + "' '" + file_b + "' >/dev/null"
- retval = os.system(command)
- if (retval == 0):
- return True
- return False
-
-############################################################
-# Function for fetching info from PKGBUILDs and packages
-############################################################
-
-def infoFromPackageFile(filename):
- pkg = pacman.load(filename)
- return pkg.name, pkg.version + "-" + pkg.release
-
-def infoFromPkgbuildFile(filename):
- # first grab the category based on the file path
- pkgdirectory = os.path.dirname(filename)
- catdirectory = os.path.dirname(pkgdirectory)
- m = re.match(r".*/([^/]+)$", catdirectory)
- if (m):
- category = m.group(1)
- else:
- category = "none"
-
- # open and source the file
- pf_stdin, pf_stdout = os.popen2("/bin/bash", 't', 0)
- print >>pf_stdin, ". " + filename
- #print "PKGBUILD: " + filename
-
- # get pkgname
- print >>pf_stdin, 'echo $pkgname'
- pkgname = pf_stdout.readline().strip()
- #print "PKGBUILD: pkgname: " + pkgname
-
- # get pkgver
- print >>pf_stdin, 'echo $pkgver'
- pkgver = pf_stdout.readline().strip()
- #print "PKGBUILD: pkgver: " + pkgver
-
- # get pkgrel
- print >>pf_stdin, 'echo $pkgrel'
- pkgrel = pf_stdout.readline().strip()
- #print "PKGBUILD: pkgrel: " + pkgrel
-
- # get url
- print >>pf_stdin, 'echo $url'
- url = pf_stdout.readline().strip()
- #print "PKGBUILD: url: " + url
-
- # get desc
- print >>pf_stdin, 'echo $pkgdesc'
- pkgdesc = pf_stdout.readline().strip()
- #print "PKGBUILD: pkgdesc: " + pkgdesc
-
- # get source array
- print >>pf_stdin, 'echo ${source[*]}'
- source = (pf_stdout.readline().strip()).split(" ")
-
- # get depends array
- print >>pf_stdin, 'echo ${depends[*]}'
- depends = (pf_stdout.readline().strip()).split(" ")
-
- # clean up
- pf_stdin.close()
- pf_stdout.close()
-
- return pkgname, pkgver + "-" + pkgrel, pkgdesc, url, depends, source, category
-
-def infoFromPkgbuildFileWorse(filename):
- # load the file with pacman library
- pkg = pacman.load(filename)
- return (pkg.name, pkg.version + "-" + pkg.release, pkg.desc,
- pkg.url, pkg.depends, pkg.source)
-
-############################################################
-# Functions for doing the final steps of execution
-############################################################
-
-def execute(command):
- global switches
- print(command)
- if not (switches.get("-n") == True):
- return os.system(command)
- return 0
-
-def copyFileToRepo(filename, repodir):
- destfile = os.path.join(repodir, os.path.basename(filename))
- command = "cp --preserve=timestamps '" + filename + "' '" + destfile + "'"
- return execute(command)
-
-def deleteFile(filename):
- command = "rm '" + filename + "'"
- return execute(command)
-
-def runGensync(repo, pkgbuild):
-#target = os.path.join(repo, os.path.basename(repo) + ".db.tar.gz")
- target = os.path.join(repo, "community.db.tar.gz")
- command = "gensync '" + pkgbuild + "' '" + target + "'"
- return execute(command)
-
-def runUpdatesyncUpd(repo, pkgbuild):
- targetDB = os.path.join(repo, "community.db.tar.gz")
- command = "updatesync upd '" + targetDB + "' '" + pkgbuild + "' '" + repo +"'"
- return execute(command)
-
-def runUpdatesyncDel(repo, pkgname):
- targetDB = os.path.join(repo, "community.db.tar.gz")
- command = "updatesync del '" + targetDB + "' '" + pkgname +"'"
- return execute(command)
-
-############################################################
-# Functions for error handling
-############################################################
-
-def warning(string):
- print >>sys.stderr, string
-
-had_error = 0
-def error(string):
- global had_error
- warning(string)
- had_error = 1
-
-############################################################
-# MAIN
-############################################################
-# The purpose of this version of tupkgupdate is to avoid
-# doing as much time and machine-intensive work as the full
-# tupkgupdate does, by relying on the state of the mysql
-# database to be correct. Since it usually is, this is a
-# good means for effecting updates more quickly, and won't
-# be a processor hog.
-#
-# Note that this version CANNOT HANDLE deleted packages. Those
-# will have to be processed less frequently. The only way to
-# know a package for sure is missing is to look through all
-# the PKGBUILDs which is what we're trying to avoid.
-#
-# ARGUMENTS
-#
-# tupkgupdate [-n] [--delete] [--paranoid] <repo_dir> <pkgbuild_dir> <build_dir>
-
-# First call getopt
-switch_list,args_proper = getopt.getopt(sys.argv[1:], 'n',
- [ "delete", "paranoid" ])
-switches = {}
-for switch in switch_list:
- switches[switch[0]] = 1
-
-# Then handle the remaining arguments
-if (len(args_proper) < 3):
- print >>sys.stderr, "syntax: tupkgupdate [-n] [--delete] [--paranoid] <repo_dir> <pkgbuild_tree> <build_tree>"
- sys.exit(-1)
-
-repo_dir, pkgbuild_dir, build_dir = args_proper
-
-# Open the database so we find out now if we can't!
-db = PackageDatabase(config.get('mysql', 'host'),
- config.get('mysql', 'username'),
- config.get('mysql', 'password'),
- config.get('mysql', 'db'))
-
-# Set up the lists and tables
-packages = dict()
-copy = list()
-delete = list()
-
-dbremove = list()
-dbmodify = list()
-
-# PASS 1: PARSING/LOCATING/CHECKING
-#
-# Go through each package file in the incoming/build tree
-c_files = packagesInTree(build_dir)
-for c_file in c_files:
-
-# 1 - fetch package.name and package.new.{version,file} from package file
-# a) error and skip if invalid package file
- pkgname, ver = infoFromPackageFile(c_file)
- if (pkgname == None or ver == None):
- error("Package file '" + c_file + "' is invalid!")
- continue
-
-# b) error and skip if this is a duplicate we've already seen
- if (packages.get(pkgname)):
- error("Pkgbuild '" + a_file + "' is a duplicate!")
- continue
-
-# c) create the package structure
- package = Package()
- package.name = pkgname
-
- version = Version()
- version.version = ver
- version.file = c_file
-
- package.new = version
-
-# 2 - use the package name to find/parse the PKGBUILD
- ver, desc, url, depends, sources, category = findPkgbuildAndGetInfo(pkgname)
-
-# a) if no PKGBUILD file, ignore the built file (log a warning, and skip)
- if (ver == None):
- # no way to log warnings at the moment
- continue
-
-# b) check that PKGBUILD pkgver-pkgrel == package.new.version (or log error and skip)
- if (ver != package.new.version):
- error("For package '" + pkgname + "' the PKGBUILD ver '" + ver + "' doesn't match the binary package ver '" + package.new.version + "')
- continue;
-
-# c) populate package.{desc,url,depends,sources,category}
- package.desc = desc
- package.url = url
- package.depends = depends
- package.sources = sources
- package.category = category
-
-# 3 - fill in package.old.version from the mysql db ([community] only) and perform checking:
- ver = db.getCommunityVersion(package.name)
-
-# a) if no record in mysql db, verify package not in repo (or log error and skip)
- if (ver == None):
- evil_packages = glob.glob(os.path.join(repodir, package.name + "-*.pkg.tar.gz"));
- found_evil_package = 0;
- for evil_package in evil_packages:
- pkgname, ver = infoFromPackageFile(evil_package)
- if (pkgname == package.name):
- error("No record of package '" + package.name + "' in [community] yet it has a package in '" + evil_package + "'")
- found_evil_package = 1;
- continue;
- if (found_evil_package == 1):
- continue;
-
-# b) if record in mysql db, infer and verify proper package.old.file in repo (or log error and skip)
- inferred_old_filepath = os.path.join(repodir, package.name + "-" + ver + ".pkg.tar.gz")
- if (not os.path.exists(inferred_old_filepath)):
- error("The old package file '" + inferred_old_filepath + "' should exist but doesn't! Aborting.")
- continue
-
-# 4 - If new file exists in repo already, delete it (silently) and skip
- new_filepath = os.path.join(repodir, os.path.basename(package.new.file))
- if (os.path.exists(new_filepath)):
- delete.append(package.new.file)
- continue
-
-# 5 - If we've gotten here, we are a legitimate update or new package, so:
-# a) put the package in the package list
- packages.append(package)
-
-# b) add new file to the "copy" list
- copy.append(package.new.file)
-
-# c) add package to "dbmodify" list
- dbmodify.append(package)
-
-# d) if package has an old, add old file to "delete" list
- if (not package.old == None):
- delete.append(package.old.file)
-
-## IF WE HAVE HAD ANY ERRORS AT THIS POINT, ABORT! ##
-if (had_error == 1):
- error("Aborting due to errors.")
- sys.exit(-1)
-
-# FOR NOW, ALWAYS EXIT, for safety
-warning("Would have succeeded in the operation.")
-warning("DBMODIFY: " + ','.join(dbmodify))
-warning("COPY: " + ','.join(copy))
-warning("DELETE: " + ','.join(delete))
-sys.exit(-1)
-
-# PASS 3: EXECUTION
-#
-
-# First, do all the database updates
-
-for package in dbmodify:
- warning("DB: Package in dbmodify: " + package.name)
- id = db.lookup(package.name)
- if (id == None):
- db.insert(package, 3)
- else:
- db.update(id, package, 3)
-
-# Copy
-for file in copy:
- retval = copyFileToRepo(file, repo_dir)
- if (retval != 0):
- error("Could not copy file to repo: '" + file + "'")
- sys.exit(-1)
-# Delete (second, for safety's sake)
-for file in delete:
- deleteFile(file)
-# Now that we've copied new files and deleted, we should delete the source
-# files, if we're supposed to
-if (switches.get("--delete") == True):
- for file in copy:
- deleteFile(file)
-
-# Run updatesync where it is needed
-for package in dbmodify:
- retval = runUpdatesyncUpd(repo_dir, os.path.join(pkgbuild_dir,package.category,package.name,"PKGBUILD"))
- if (retval != 0):
- error("Updatesync upd returned an error!")
- sys.exit(-1)
-
-# vim: ft=python ts=2 sw=2 noet
diff --git a/tupkg/update/tupkgupdate64 b/tupkg/update/tupkgupdate64
deleted file mode 100755
index 80c19d91..00000000
--- a/tupkg/update/tupkgupdate64
+++ /dev/null
@@ -1,579 +0,0 @@
-#!/usr/bin/python -O
-
-import re
-import os
-import sys
-import pacman
-import getopt
-import MySQLdb
-import MySQLdb.connections
-import ConfigParser
-
-###########################################################
-# Deal with configuration
-###########################################################
-
-conffile = '/etc/tupkgs64.conf'
-
-if not os.path.isfile(conffile):
- print "Error: cannot access config file ("+conffile+")"
- usage(argv[0])
- sys.exit(1)
-
-config = ConfigParser.ConfigParser()
-config.read(conffile)
-
-############################################################
-
-# Define some classes we need
-class Version:
- def __init__(self):
- self.version = None
- self.file = None
-
-class Package:
- def __init__(self):
- self.name = None
- self.category = None
- self.old = None
- self.new = None
- self.desc = None
- self.url = None
- self.depends = None
- self.sources = None
-
-class PackageDatabase:
- def __init__(self, host, user, password, dbname):
- self.host = host
- self.user = user
- self.password = password
- self.dbname = dbname
- self.connection = MySQLdb.connect(host=host, user=user, passwd=password, db=dbname)
- def cursor(self):
- try:
- self.connection.ping()
- except MySQLdb.OperationalError:
- self.connection = MySQLdb.connect(host=self.host, user=self.user, passwd=self.password, db=self.dbname)
- return self.connection.cursor()
- def lookup(self, packagename):
- warning("DB: Looking up package: " + packagename)
- q = self.cursor()
- q.execute("SELECT ID FROM Packages WHERE Name = '" +
- MySQLdb.escape_string(packagename) + "'")
- if (q.rowcount != 0):
- row = q.fetchone()
- return row[0]
- return None
- def getCategoryID(self, package):
- category_id = self.lookupCategory(package.category)
- if (category_id == None):
- category_id = 1
- warning("DB: Got category ID '" + str(category_id) + "' for package '" + package.name + "'")
- return category_id
- def insert(self, package, locationId):
- warning("DB: Inserting package: " + package.name)
- global repo_dir
- q = self.cursor()
- q.execute("INSERT INTO Packages " +
- "(Name, CategoryID, Version, FSPath, LocationID, SubmittedTS, Description, URL) VALUES ('" +
- MySQLdb.escape_string(package.name) + "', " +
- str(self.getCategoryID(package)) + ", '" +
- MySQLdb.escape_string(package.new.version) + "', '" +
- MySQLdb.escape_string(
- os.path.join(repo_dir, os.path.basename(package.new.file))) + "', " +
- str(locationId) + ", " +
- "UNIX_TIMESTAMP(), '" +
- MySQLdb.escape_string(str(package.desc)) + "', '" +
- MySQLdb.escape_string(str(package.url)) + "')")
- id = self.lookup(package.name)
- self.insertNewInfo(package, id, locationId)
- def update(self, id, package, locationId):
- warning("DB: Updating package: " + package.name + " with id " + str(id))
- global repo_dir
- q = self.cursor()
- if (self.isdummy(package.name)):
- q.execute("UPDATE Packages SET " +
- "Version = '" + MySQLdb.escape_string(package.new.version) + "', " +
- "CategoryID = " + str(self.getCategoryID(package)) + ", " +
- "FSPath = '" + MySQLdb.escape_string(
- os.path.join(repo_dir, os.path.basename(package.new.file))) + "', " +
- "Description = '" + MySQLdb.escape_string(str(package.desc)) + "', " +
- "DummyPkg = 0, " +
- "SubmittedTS = UNIX_TIMESTAMP(), " +
- "URL = '" + MySQLdb.escape_string(str(package.url)) + "' " +
- "WHERE ID = " + str(id))
- else:
- q.execute("UPDATE Packages SET " +
- "Version = '" + MySQLdb.escape_string(package.new.version) + "', " +
- "CategoryID = " + str(self.getCategoryID(package)) + ", " +
- "FSPath = '" + MySQLdb.escape_string(
- os.path.join(repo_dir, os.path.basename(package.new.file))) + "', " +
- "Description = '" + MySQLdb.escape_string(str(package.desc)) + "', " +
- "ModifiedTS = UNIX_TIMESTAMP(), " +
- "URL = '" + MySQLdb.escape_string(str(package.url)) + "' " +
- "WHERE ID = " + str(id))
- self.insertNewInfo(package, id, locationId)
- # we must lastly check to see if this is a move of a package from
- # unsupported to community, because we'd have to reset maintainer and location
- q = self.cursor()
- q.execute("SELECT LocationID FROM Packages WHERE ID = " + str(id))
- if (q.rowcount != 0):
- row = q.fetchone()
- if (row[0] != 3):
- q = self.cursor()
- q.execute("UPDATE Packages SET LocationID = 3, MaintainerUID = null WHERE ID = " + str(id))
- def remove(self, id, locationId):
- warning("DB: Removing package with id: " + str(id))
- q = self.cursor()
- q.execute("DELETE FROM Packages WHERE " +
- "LocationID = " + str(locationId) + " AND ID = " + str(id))
- def clearOldInfo(self, id):
- warning("DB: Clearing old info for package with id : " + str(id))
- q = self.cursor()
- q.execute("DELETE FROM PackageContents WHERE PackageID = " + str(id))
- q.execute("DELETE FROM PackageDepends WHERE PackageID = " + str(id))
- q.execute("DELETE FROM PackageSources WHERE PackageID = " + str(id))
- def lookupOrDummy(self, packagename):
- retval = self.lookup(packagename)
- if (retval != None):
- return retval
- return self.createDummy(packagename)
- def lookupCategory(self, categoryname):
- warning("DB: Looking up category: " + categoryname)
- q = self.cursor()
- q.execute("SELECT ID from PackageCategories WHERE Category = '" + MySQLdb.escape_string(categoryname) + "'")
- if (q.rowcount != 0):
- row = q.fetchone()
- return row[0]
- return None
- def createDummy(self, packagename):
- warning("DB: Creating dummy package for: " + packagename)
- q = self.cursor()
- q.execute("INSERT INTO Packages " +
- "(Name, Description, LocationID, DummyPkg) " +
- "VALUES ('" +
- MySQLdb.escape_string(packagename) + "', '" +
- MySQLdb.escape_string("A dummy package") + "', 1, 1)")
- return self.lookup(packagename)
- def insertNewInfo(self, package, id, locationId):
- q = self.cursor()
-
- # first delete the old; this is never bad
- self.clearOldInfo(id)
-
- warning("DB: Inserting new package info for " + package.name +
- " with id " + str(id))
-
- # PackageSources
- for source in package.sources:
- q.execute("INSERT INTO PackageSources (PackageID, Source) " +
- "VALUES (" + str(id) + ", '" + MySQLdb.escape_string(source) + "')")
- # PackageDepends
- for dep in package.depends:
- depid = self.lookupOrDummy(dep)
- q.execute("INSERT INTO PackageDepends (PackageID, DepPkgID) " +
- "VALUES (" + str(id) + ", " + str(depid) + ")")
- def isdummy(self, packagename):
- warning("DB: Looking up package: " + packagename)
- q = self.cursor()
- q.execute("SELECT * FROM Packages WHERE Name = '" +
- MySQLdb.escape_string(packagename) + "' AND DummyPkg = 1")
- if (q.rowcount != 0):
- return True
- return False
-
-############################################################
-# Functions for walking the file trees
-############################################################
-
-def filesForRegexp(topdir, regexp):
- retval = []
- def matchfile(regexp, dirpath, namelist):
- for name in namelist:
- if (regexp.match(name)):
- retval.append(os.path.join(dirpath, name))
- os.path.walk(topdir, matchfile, regexp)
- return retval
-
-def packagesInTree(topdir):
- return filesForRegexp(topdir, re.compile("^.*\.pkg\.tar\.gz$"))
-
-def pkgbuildsInTree(topdir):
- return filesForRegexp(topdir, re.compile("^PKGBUILD$"))
-
-############################################################
-# Function for testing if two files are identical
-############################################################
-
-def areFilesIdentical(file_a, file_b):
- command = "cmp '" + file_a + "' '" + file_b + "' >/dev/null"
- retval = os.system(command)
- if (retval == 0):
- return True
- return False
-
-############################################################
-# Function for fetching info from PKGBUILDs and packages
-############################################################
-
-def infoFromPackageFile(filename):
- pkg = os.path.basename(filename)
- m = re.compile("(?P<pkgname>.*)-(?P<pkgver>.*)-(?P<pkgrel>.*).pkg.tar.gz").search(pkg)
- if not m:
- raise Exception("Non-standard filename")
- else:
- return m.group('pkgname'), m.group('pkgver') + "-" + m.group('pkgrel')
-
-def infoFromPkgbuildFile(filename):
- # first grab the category based on the file path
- pkgdirectory = os.path.dirname(filename)
- catdirectory = os.path.dirname(pkgdirectory)
- m = re.match(r".*/([^/]+)$", catdirectory)
- if (m):
- category = m.group(1)
- else:
- category = "none"
-
- # open and source the file
- pf_stdin, pf_stdout = os.popen2("/bin/bash", 't', 0)
- print >>pf_stdin, ". " + filename
- #print "PKGBUILD: " + filename
-
- # get pkgname
- print >>pf_stdin, 'echo $pkgname'
- pkgname = pf_stdout.readline().strip()
- #print "PKGBUILD: pkgname: " + pkgname
-
- # get pkgver
- print >>pf_stdin, 'echo $pkgver'
- pkgver = pf_stdout.readline().strip()
- #print "PKGBUILD: pkgver: " + pkgver
-
- # get pkgrel
- print >>pf_stdin, 'echo $pkgrel'
- pkgrel = pf_stdout.readline().strip()
- #print "PKGBUILD: pkgrel: " + pkgrel
-
- # get url
- print >>pf_stdin, 'echo $url'
- url = pf_stdout.readline().strip()
- #print "PKGBUILD: url: " + url
-
- # get desc
- print >>pf_stdin, 'echo $pkgdesc'
- pkgdesc = pf_stdout.readline().strip()
- #print "PKGBUILD: pkgdesc: " + pkgdesc
-
- # get source array
- print >>pf_stdin, 'echo ${source[*]}'
- source = (pf_stdout.readline().strip()).split(" ")
-
- # get depends array
- print >>pf_stdin, 'echo ${depends[*]}'
- depends = (pf_stdout.readline().strip()).split(" ")
-
- # clean up
- pf_stdin.close()
- pf_stdout.close()
-
- return pkgname, pkgver + "-" + pkgrel, pkgdesc, url, depends, source, category
-
-def infoFromPkgbuildFileWorse(filename):
- # load the file with pacman library
- pkg = pacman.load(filename)
- return (pkg.name, pkg.version + "-" + pkg.release, pkg.desc,
- pkg.url, pkg.depends, pkg.source)
-
-############################################################
-# Functions for doing the final steps of execution
-############################################################
-
-def execute(command):
- global switches
- print(command)
- if not (switches.get("-n") == True):
- return os.system(command)
- return 0
-
-def copyFileToRepo(filename, repodir):
- destfile = os.path.join(repodir, os.path.basename(filename))
- command = "cp --preserve=timestamps '" + filename + "' '" + destfile + "'"
- return execute(command)
-
-def deleteFile(filename):
- command = "rm '" + filename + "'"
- return execute(command)
-
-def runRepoAdd(repo, package):
- global havefakeroot
- targetDB = os.path.join(repo, "community.db.tar.gz")
- destfile = os.path.join(repo, os.path.basename(package.new.file))
- if havefakeroot:
- command = "fakeroot repo-add '" + targetDB + "' '" + destfile + "'"
- else:
- command = "repo-add '" + targetDB + "' '" + destfile + "'"
- return execute(command)
-
-def runRepoRemove(repo, pkgname):
- global havefakeroot
- targetDB = os.path.join(repo, "community.db.tar.gz")
- if havefakeroot:
- command = "fakeroot repo-remove '" + targetDB + "' '"+ pkgname + "'"
- else:
- command = "repo-remove '" + targetDB + "' '" + pkgname +"'"
- return execute(command)
-
-############################################################
-# Functions for error handling
-############################################################
-
-def warning(string):
- print >>sys.stderr, string
-
-had_error = 0
-def error(string):
- global had_error
- warning(string)
- had_error = 1
-
-############################################################
-# MAIN
-############################################################
-
-# ARGUMENTS
-#
-# tupkgupdate [-n] [--delete] [--paranoid] <repo_dir> <pkgbuild_dir> <build_dir>
-
-# First call getopt
-switch_list,args_proper = getopt.getopt(sys.argv[1:], 'n',
- [ "delete", "paranoid" ])
-switches = {}
-for switch in switch_list:
- switches[switch[0]] = 1
-
-# Then handle the remaining arguments
-if (len(args_proper) < 3):
- print >>sys.stderr, "syntax: tupkgupdate64 [-n] [--delete] [--paranoid] <repo_dir> <pkgbuild_tree> <build_tree>"
- sys.exit(-1)
-
-# Make sure we can use fakeroot, warn if not
-havefakeroot = False
-if os.access('/usr/bin/fakeroot', os.X_OK):
- havefakeroot = True
-else:
- warning("Not using fakeroot for repo db generation")
-
-repo_dir, pkgbuild_dir, build_dir = args_proper
-
-# Open the database so we find out now if we can't!
-db = PackageDatabase(config.get('mysql', 'host'),
- config.get('mysql', 'username'),
- config.get('mysql', 'password'),
- config.get('mysql', 'db'))
-
-# Set up the lists and tables
-packages = dict()
-copy = list()
-delete = list()
-
-dbremove = list()
-dbmodify = list()
-
-# PASS 1: PARSING/LOCATING
-#
-# A) Go through the PKGBUILD tree
-# For each PKGBUILD, create a Package with new Version containing
-# parsed version and and None for file
-
-a_files = pkgbuildsInTree(pkgbuild_dir)
-for a_file in a_files:
- pkgname, ver, desc, url, depends, sources, category = infoFromPkgbuildFile(a_file)
-
- # Error (and skip) if we encounter any invalid PKGBUILD files
- if (pkgname == None or ver == None):
- error("Pkgbuild '" + a_file + "' is invalid!")
- continue
-
- # Error (and skip) if we encounter any duplicate package names
- # in the PKGBUILDs
- if (packages.get(pkgname)):
- error("Pkgbuild '" + a_file + "' is a duplicate!")
- continue
-
- version = Version()
- version.version = ver
- version.file = None
-
- package = Package()
- package.name = pkgname
- package.category = category
- package.desc = desc
- package.url = url
- package.depends = depends
- package.sources = sources
- package.new = version
-
-# print "Package: desc " + desc
-
- packages[pkgname] = package
-
-# B) Go through the old repo dir
-# For each package file we encounter, create a Package with old
-# Version containing parsed version and filepath
-
-b_files = packagesInTree(repo_dir)
-for b_file in b_files:
- pkgname, ver = infoFromPackageFile(b_file)
-
- version = Version()
- version.version = ver
- version.file = b_file
-
- package = packages.get(pkgname)
- if (package == None):
- package = Package()
- package.name = pkgname
- packages[pkgname] = package
- package.old = version
-
-# C) Go through the build tree
-# For each package file we encounter:
-# 1 - look up the package name; if it fails, ignore the file (no error)
-# 2 - if package.new == None, ignore the package (no error)
-# 3 - if package.new.version doesn't match, then skip (no error)
-# 4 - if package.new.file == None, point it to this file
-# otherwise, log an error (and skip)
-
-c_files = packagesInTree(build_dir)
-for c_file in c_files:
- pkgname, ver = infoFromPackageFile(c_file)
-
- # 1
- package = packages.get(pkgname)
- if (package == None):
- continue
-
- # 2
- if (package.new == None):
- continue
-
- # 3
- if (package.new.version != ver):
- continue
-
- # 4
- if (package.new.file == None):
- package.new.file = c_file
- continue
- else:
- error("Duplicate new file '" + c_file + "'")
- continue
-
-# PASS 2: CHECKING
-#
-# Go through the package collection
-# 1 - if package has no new, place its old file on the "delete" list (and package on "dbremove")
-# 2 - if package has a new but no new.file, and old file doesn't
-# have the same version, then error (because gensync won't rebuild)
-# 3 - if package has no old, add new file to "copy" list into repo dir (and package on "dbmodify")
-# 4 - if new == old and paranoid is set, compare the files and error if not the same;
-# otherwise just skip (no update)
-# 5 - if we got here, it's a legit nontrivial new version which we allow
-# add entry to "delete" list for old file and "copy" list for
-# new file into repo dir (and package to "dbmodify")
-
-for package in packages.values():
- # 1
- if (package.new == None):
- delete.append(package.old.file)
- dbremove.append(package)
- continue
-
- # 2
- if (package.new.file == None):
- if (package.old == None or package.old.file == None or
- package.old.version != package.new.version):
- errstr = "No new package supplied for " + package.name + " " + package.new.version + "!"
- error(errstr)
- continue
-
- # 3
- if (package.old == None):
- copy.append(package.new.file)
- dbmodify.append(package)
- continue
-
- # 4
- if (package.old.version == package.new.version):
- if (switches.get("--paranoid") == True and package.new.file != None):
- if not (areFilesIdentical(package.old.file, package.new.file)):
- warning("New package file with identical version '" +
- package.new.file + "' is different than the old one:")
- if (switches.get("--delete") == True):
- warning(" Deleting the new file.")
- delete.append(package.new.file)
- else:
- warning(" Ignoring the new file.")
- continue
-
- # 5
- delete.append(package.old.file)
- copy.append(package.new.file)
- dbmodify.append(package)
- continue
-
-## IF WE HAVE HAD ANY ERRORS AT THIS POINT, ABORT! ##
-if (had_error == 1):
- error("Aborting due to errors.")
- sys.exit(-1)
-
-# PASS 3: EXECUTION
-#
-
-# First, do all the database updates
-# We won't do these for x86_64 - jason Oct 1/2006
-#for package in dbremove:
-# id = db.lookup(package.name)
-# # Note: this could remove a package from unsupported; probably want to restrict to locationId and/or non-dummy
-# if (id != None):
-# db.clearOldInfo(id)
-# db.remove(id, 3)
-#
-#for package in dbmodify:
-# warning("DB: Package in dbmodify: " + package.name)
-# id = db.lookup(package.name)
-# if (id == None):
-# db.insert(package, 3)
-# else:
-# db.update(id, package, 3)
-
-# Copy
-for file in copy:
- retval = copyFileToRepo(file, repo_dir)
- if (retval != 0):
- error("Could not copy file to repo: '" + file + "'")
- sys.exit(-1)
-
-# Delete (second, for safety's sake)
-for file in delete:
- deleteFile(file)
-
-# Now that we've copied new files and deleted, we should delete the source
-# files, if we're supposed to
-if (switches.get("--delete") == True):
- for file in copy:
- deleteFile(file)
-
-# Run updatesync where it is needed
-for package in dbremove:
- retval = runRepoRemove(repo_dir, package.name)
- if (retval != 0):
- error("repo-remove returned an error!")
- sys.exit(-1)
-for package in dbmodify:
- retval = runRepoAdd(repo_dir, package)
- if (retval != 0):
- error("repo-add returned an error!")
- sys.exit(-1)
-
-# vim: ft=python ts=2 sw=2 noet