summaryrefslogtreecommitdiffstats
path: root/docs
diff options
context:
space:
mode:
Diffstat (limited to 'docs')
-rw-r--r--docs/xml/installation.xml308
1 files changed, 216 insertions, 92 deletions
diff --git a/docs/xml/installation.xml b/docs/xml/installation.xml
index 8deeeb24d..4461140d8 100644
--- a/docs/xml/installation.xml
+++ b/docs/xml/installation.xml
@@ -1,5 +1,5 @@
<!-- <!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"> -->
-<!-- $Id: installation.xml,v 1.129 2006/08/19 17:41:47 mozilla%colinogilvie.co.uk Exp $ -->
+<!-- $Id: installation.xml,v 1.130 2006/10/08 18:41:45 mozilla%colinogilvie.co.uk Exp $ -->
<chapter id="installing-bugzilla">
<title>Installing Bugzilla</title>
@@ -287,7 +287,7 @@
<listitem>
<para>
- CGI (&min-cgi-ver;)
+ CGI &min-cgi-ver; or CGI &min-mp-cgi-ver; if using mod_perl
</para>
</listitem>
@@ -567,7 +567,23 @@
</para>
</section>
-
+ <section id="using-mod_perl-with-bugzilla">
+ <title>Installing Bugzilla on mod_perl</title>
+ <para>It is now possible to run the Bugzilla software under <literal>mod_perl</literal> on
+ Apache. <literal>mod_perl</literal> has some additional requirements to that of running
+ Bugzilla under <literal>mod_cgi</literal> (the standard and previous way).</para>
+
+ <para>Bugzilla requires <literal>mod_perl</literal> to be installed, which can be
+ obtained from <ulink url="http://perl.apache.org"/> - Bugzilla requires
+ version &min-mp-mod_perl2-ver; (AKA 2.0.0-RC5) to be installed.</para>
+
+ <para>Bugzilla also requires a more up-to-date version of the CGI
+ perl module to be installed, version &min-mp-cgi-ver; as opposed to &min-cgi-ver;
+ </para>
+
+ <para>Finally, Bugzilla also requires <literal>Apache::DBI</literal>
+ (&min-mp-apache-dbi-ver;) to be installed as well.</para>
+ </section>
</section>
@@ -638,7 +654,7 @@
<section id="database-engine">
<title>Database Server</title>
<para>This section deals with configuring your database server for use
- with Bugzilla. Currently <xref linkend="mysql"/> and
+ with Bugzilla. Currently <xref linkend="mysql"/> and
<xref linkend="postgresql"/> are available.</para>
<section id="mysql">
@@ -874,100 +890,208 @@
</para>
<section id="http-apache">
- <title>Apache <productname>httpd</productname></title>
-
- <para>
- To configure your Apache web server to work with Bugzilla,
- do the following:
+ <title>Bugzilla using Apache</title>
+ <para>You have two options for running Bugzilla under Apache -
+ <link linkend="http-apache-mod_cgi">mod_cgi</link> (the default) and
+ <link linkend="http-apache-mod_perl">mod_perl</link> (new in Bugzilla
+ 2.23)
</para>
-
- <procedure>
- <step>
- <para>
- Load <filename>httpd.conf</filename> in your editor.
- In Fedora and Red Hat Linux, this file is found in
- <filename class="directory">/etc/httpd/conf</filename>.
- </para>
- </step>
-
- <step>
- <para>
- Apache uses <computeroutput>&lt;Directory&gt;</computeroutput>
- directives to permit fine-grained permission setting. Add the
- following lines to a directive that applies to the location
- of your Bugzilla installation. (If such a section does not
- exist, you'll want to add one.) In this example, Bugzilla has
- been installed at
- <filename class="directory">/var/www/html/bugzilla</filename>.
- </para>
-
- <programlisting>
-&lt;Directory /var/www/html/bugzilla&gt;
- AddHandler cgi-script .cgi
- Options +Indexes +ExecCGI
- DirectoryIndex index.cgi
- AllowOverride Limit
-&lt;/Directory&gt;
- </programlisting>
-
+ <section id="http-apache-mod_cgi">
+ <title>Apache <productname>httpd</productname> with mod_cgi</title>
+
<para>
- These instructions: allow apache to run .cgi files found
- within the bugzilla directory; instructs the server to look
- for a file called <filename>index.cgi</filename> if someone
- only types the directory name into the browser; and allows
- Bugzilla's <filename>.htaccess</filename> files to override
- global permissions.
+ To configure your Apache web server to work with Bugzilla while using
+ mod_cgi, do the following:
</para>
-
+
+ <procedure>
+ <step>
+ <para>
+ Load <filename>httpd.conf</filename> in your editor.
+ In Fedora and Red Hat Linux, this file is found in
+ <filename class="directory">/etc/httpd/conf</filename>.
+ </para>
+ </step>
+
+ <step>
+ <para>
+ Apache uses <computeroutput>&lt;Directory&gt;</computeroutput>
+ directives to permit fine-grained permission setting. Add the
+ following lines to a directive that applies to the location
+ of your Bugzilla installation. (If such a section does not
+ exist, you'll want to add one.) In this example, Bugzilla has
+ been installed at
+ <filename class="directory">/var/www/html/bugzilla</filename>.
+ </para>
+
+ <programlisting>
+ &lt;Directory /var/www/html/bugzilla&gt;
+ AddHandler cgi-script .cgi
+ Options +Indexes +ExecCGI
+ DirectoryIndex index.cgi
+ AllowOverride Limit
+ &lt;/Directory&gt;
+ </programlisting>
+
+ <para>
+ These instructions: allow apache to run .cgi files found
+ within the bugzilla directory; instructs the server to look
+ for a file called <filename>index.cgi</filename> if someone
+ only types the directory name into the browser; and allows
+ Bugzilla's <filename>.htaccess</filename> files to override
+ global permissions.
+ </para>
+
+ <note>
+ <para>
+ It is possible to make these changes globally, or to the
+ directive controlling Bugzilla's parent directory (e.g.
+ <computeroutput>&lt;Directory /var/www/html/&gt;</computeroutput>).
+ Such changes would also apply to the Bugzilla directory...
+ but they would also apply to many other places where they
+ may or may not be appropriate. In most cases, including
+ this one, it is better to be as restrictive as possible
+ when granting extra access.
+ </para>
+ </note>
+ </step>
+
+ <step>
+ <para>
+ <filename>checksetup.pl</filename> can set tighter permissions
+ on Bugzilla's files and directories if it knows what group the
+ webserver runs as. Find the <computeroutput>Group</computeroutput>
+ line in <filename>httpd.conf</filename>, place the value found
+ there in the <replaceable>$webservergroup</replaceable> variable
+ in <filename>localconfig</filename>, then rerun
+ <filename>checksetup.pl</filename>.
+ </para>
+ </step>
+
+ <step>
+ <para>
+ Optional: If Bugzilla does not actually reside in the webspace
+ directory, but instead has been symbolically linked there, you
+ will need to add the following to the
+ <computeroutput>Options</computeroutput> line of the Bugzilla
+ <computeroutput>&lt;Directory&gt;</computeroutput> directive
+ (the same one as in the step above):
+ </para>
+
+ <programlisting>
+ +FollowSymLinks
+ </programlisting>
+
+ <para>
+ Without this directive, Apache will not follow symbolic links
+ to places outside its own directory structure, and you will be
+ unable to run Bugzilla.
+ </para>
+ </step>
+ </procedure>
+ </section>
+ <section id="http-apache-mod_perl">
+ <title>Apache <productname>httpd</productname> with mod_perl</title>
+
+ <para>Some configuration is required to make Bugzilla work with Apache
+ and mod_perl</para>
+
+ <procedure>
+ <step>
+ <para>
+ Load <filename>httpd.conf</filename> in your editor.
+ In Fedora and Red Hat Linux, this file is found in
+ <filename class="directory">/etc/httpd/conf</filename>.
+ </para>
+ </step>
+
+ <step>
+ <para>Add the following information to your httpd.conf file, substituting
+ where appropriate with your own local paths.</para>
+
+ <note>
+ <para>This should be used instead of the &lt;Directory&gt; block
+ shown above. This should also be above any other <literal>mod_perl</literal>
+ directives within the <filename>httpd.conf</filename> and must be specified
+ in the order as below.</para>
+ </note>
+ <warning>
+ <para>You should also ensure that you have disabled <literal>KeepAlive</literal>
+ support in your Apache install when utilizing Bugzilla under mod_perl</para>
+ </warning>
+
+ <programlisting>
+ PerlSwitches -I/var/www/html/bugzilla -w -T
+ PerlConfigRequire /var/www/html/bugzilla/mod_perl.pl
+ </programlisting>
+ </step>
+
+ <step>
+ <para>
+ <filename>checksetup.pl</filename> can set tighter permissions
+ on Bugzilla's files and directories if it knows what group the
+ webserver runs as. Find the <computeroutput>Group</computeroutput>
+ line in <filename>httpd.conf</filename>, place the value found
+ there in the <replaceable>$webservergroup</replaceable> variable
+ in <filename>localconfig</filename>, then rerun
+ <filename>checksetup.pl</filename>.
+ </para>
+ </step>
+ </procedure>
+
+ <para>On restarting Apache, Bugzilla should now be running within the
+ mod_perl environment. Please ensure you have run checksetup.pl to set
+ permissions before you restart Apache.</para>
+
<note>
- <para>
- It is possible to make these changes globally, or to the
- directive controlling Bugzilla's parent directory (e.g.
- <computeroutput>&lt;Directory /var/www/html/&gt;</computeroutput>).
- Such changes would also apply to the Bugzilla directory...
- but they would also apply to many other places where they
- may or may not be appropriate. In most cases, including
- this one, it is better to be as restrictive as possible
- when granting extra access.
- </para>
- </note>
- </step>
-
- <step>
- <para>
- <filename>checksetup.pl</filename> can set tighter permissions
- on Bugzilla's files and directories if it knows what group the
- webserver runs as. Find the <computeroutput>Group</computeroutput>
- line in <filename>httpd.conf</filename>, place the value found
- there in the <replaceable>$webservergroup</replaceable> variable
- in <filename>localconfig</filename>, then rerun
- <filename>checksetup.pl</filename>.
+ <para>Please bear the following points in mind when looking at using
+ Bugzilla under mod_perl:
+ <itemizedlist>
+ <listitem>
+ <para>
+ mod_perl support in Bugzilla can take up a HUGE amount of RAM. You could be
+ lookng at 30MB per httpd child, easily. Basically, you just need a lot of RAM.
+ The more RAM you can get, the better. mod_perl is basically trading RAM for
+ speed. At least 2GB total system RAM is recommended for running Bugzilla under
+ mod_perl.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Under mod_perl, you have to restart Apache if you make any manual change to
+ any Bugzilla file. You can't just reload--you have to actually
+ <emphasis>restart</emphasis> the server (as in make sure it stops and starts
+ again). You <emphasis>can</emphasis> change localconfig and the params file
+ manually, if you want, because those are re-read every time you load a page.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ You must run in Apache's Prefork MPM (this is the default). The Worker MPM
+ may not work--we haven't tested Bugzilla's mod_perl support under threads.
+ (And, in fact, we're fairly sure it <emphasis>won't</emphasis> work.)
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Bugzilla generally expects to be the only mod_perl application running on
+ your entire server. It may or may not work if there are other applications also
+ running under mod_perl. It does try its best to play nice with other mod_perl
+ applications, but it still may have conflicts.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ It is recommended that you have one Bugzilla instance running under mod_perl
+ on your server. Bugzilla has not been tested with more than one instance running.
+ </para>
+ </listitem>
+ </itemizedlist>
</para>
- </step>
-
- <step>
- <para>
- Optional: If Bugzilla does not actually reside in the webspace
- directory, but instead has been symbolically linked there, you
- will need to add the following to the
- <computeroutput>Options</computeroutput> line of the Bugzilla
- <computeroutput>&lt;Directory&gt;</computeroutput> directive
- (the same one as in the step above):
- </para>
-
- <programlisting>
- +FollowSymLinks
- </programlisting>
-
- <para>
- Without this directive, Apache will not follow symbolic links
- to places outside its own directory structure, and you will be
- unable to run Bugzilla.
- </para>
- </step>
- </procedure>
+ </note>
+ </section>
</section>
-
+
<section id="http-iis">
<title>Microsoft <productname>Internet Information Services</productname></title>