summaryrefslogtreecommitdiffstats
path: root/docs
diff options
context:
space:
mode:
Diffstat (limited to 'docs')
-rw-r--r--docs/en/xml/installation.xml172
1 files changed, 22 insertions, 150 deletions
diff --git a/docs/en/xml/installation.xml b/docs/en/xml/installation.xml
index dc22d454b..ac0f745be 100644
--- a/docs/en/xml/installation.xml
+++ b/docs/en/xml/installation.xml
@@ -1,5 +1,5 @@
<!-- <!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"> -->
-<!-- $Id: installation.xml,v 1.150 2008/04/04 06:48:20 lpsolit%gmail.com Exp $ -->
+<!-- $Id: installation.xml,v 1.151 2008/04/04 06:48:21 lpsolit%gmail.com Exp $ -->
<chapter id="installing-bugzilla">
<title>Installing Bugzilla</title>
@@ -2152,10 +2152,12 @@ pid-file=/home/foo/mymysql/the.pid
<section>
<title>Perl</title>
- <para>On the extremely rare chance that you don't have Perl on
+ <para>
+ On the extremely rare chance that you don't have Perl on
the machine, you will have to build the sources
yourself. The following commands should get your system
- installed with your own personal version of Perl:</para>
+ installed with your own personal version of Perl:
+ </para>
<screen>
<prompt>bash$</prompt>
@@ -2170,139 +2172,23 @@ pid-file=/home/foo/mymysql/the.pid
<command>make &amp;&amp; make test &amp;&amp; make install</command>
</screen>
- <para>Once you have Perl installed into a directory (probably
- in <filename class="directory">~/perl/bin</filename>), you'll have to
- change the locations on the scripts, which is detailed later on
- this page.</para>
+ <para>
+ Once you have Perl installed into a directory (probably
+ in <filename class="directory">~/perl/bin</filename>), you will need to
+ install the Perl Modules, described below.
+ </para>
</section>
<section id="install-perlmodules-nonroot">
<title>Perl Modules</title>
- <para>Installing the Perl modules as a non-root user is probably the
- hardest part of the process. There are two different methods: a
- completely independant Perl with its own modules, or personal
- modules using the current (root installed) version of Perl. The
- independant method takes up quite a bit of disk space, but is
- less complex, while the mixed method only uses as much space as the
- modules themselves, but takes more work to setup.</para>
-
- <section>
- <title>The Independant Method</title>
-
- <para>The independant method requires that you install your own
- personal version of Perl, as detailed in the previous section. Once
- installed, you can start the CPAN shell with the following
- command:</para>
-
- <para>
- <screen>
- <prompt>bash$</prompt>
- <command>/home/foo/perl/bin/perl -MCPAN -e 'shell'</command>
- </screen>
- </para>
-
- <para>And then:</para>
-
- <para>
- <screen>
- <prompt>cpan&gt;</prompt>
- <command>install Bundle::Bugzilla</command>
- </screen>
- </para>
-
- <para>With this method, module installation will usually go a lot
- smoother, but if you have any hang-ups, you can consult the next
- section.</para>
- </section>
-
- <section>
- <title>The Mixed Method</title>
-
- <para>First, you'll need to configure CPAN to
- install modules in your home directory. The CPAN FAQ says the
- following on this issue:</para>
-
- <para>
- <programlisting>
-5) I am not root, how can I install a module in a personal directory?
-
- You will most probably like something like this:
-
- o conf makepl_arg "LIB=~/myperl/lib \
- INSTALLMAN1DIR=~/myperl/man/man1 \
- INSTALLMAN3DIR=~/myperl/man/man3"
- install Sybase::Sybperl
-
- You can make this setting permanent like all "o conf" settings with "o conf commit".
-
- You will have to add ~/myperl/man to the MANPATH environment variable and also tell your Perl programs to
- look into ~/myperl/lib, e.g. by including
-
- use lib "$ENV{HOME}/myperl/lib";
-
- or setting the PERL5LIB environment variable.
-
- Another thing you should bear in mind is that the UNINST parameter should never be set if you are not root.</programlisting>
- </para>
-
- <para>So, you will need to create a Perl directory in your home
- directory, as well as the <filename class="directory">lib</filename>,
- <filename class="directory">man</filename>,
- <filename class="directory">man/man1</filename>, and
- <filename class="directory">man/man3</filename> directories in that
- Perl directory. Set the MANPATH variable and PERL5LIB variable, so
- that the installation of the modules goes smoother. (Setting
- UNINST=0 in your "make install" options, on the CPAN first-time
- configuration, is also a good idea.)</para>
-
- <para>After that, go into the CPAN shell:</para>
-
- <para>
- <screen>
- <prompt>bash$</prompt>
- <command>perl -MCPAN -e 'shell'</command>
- </screen>
- </para>
-
- <para>From there, you will need to type in the above "o conf" command
- and commit the changes. Then you can run through the installation:</para>
-
- <para>
- <screen>
- <prompt>cpan&gt;</prompt>
- <command>install Bundle::Bugzilla</command>
- </screen>
- </para>
-
- <para>Most of the module installation process should go smoothly. However,
- you may have some problems with Template. When you first start, you will
- want to try to install Template with the XS Stash options on. If this
- doesn't work, it may spit out C compiler error messages and croak back
- to the CPAN shell prompt. So, redo the install, and turn it off. (In fact,
- say no to all of the Template questions.) It may also start failing on a
- few of the tests. If the total tests passed is a reasonable figure (90+%),
- force the install with the following command:</para>
-
- <para>
- <screen>
- <prompt>cpan&gt;</prompt>
- <command>force install Template</command>
- </screen>
- </para>
-
- <para>You may also want to install the other optional modules:</para>
-
- <screen>
- <prompt>cpan&gt;</prompt>
- <command>install GD</command>
- <prompt>cpan&gt;</prompt>
- <command>install Chart::Base</command>
- <prompt>cpan&gt;</prompt>
- <command>install MIME::Parser</command>
- </screen>
-
- </section>
+ <para>
+ Installing the Perl modules as a non-root user is accomplished by
+ running the <filename>install-module.pl</filename>
+ script. For more details on this script, see
+ <link linkend="api/install-module.html"/>.
+
+ </para>
</section>
<section>
@@ -2347,30 +2233,16 @@ pid-file=/home/foo/mymysql/the.pid
<section>
<title>Bugzilla</title>
- <para>If you had to install Perl modules as a non-root user
- (<xref linkend="install-perlmodules-nonroot" />) or to non-standard
- directories, you will need to change the scripts, setting the correct
- location of the Perl modules:</para>
-
<para>
- <programlisting>perl -pi -e
- 's@use strict\;@use strict\; use lib \"/home/foo/perl/lib\"\;@'
- *cgi *pl Bug.pm processmail syncshadowdb</programlisting>
-
- Change <filename class="directory">/home/foo/perl/lib</filename> to
- your personal Perl library directory. You can probably skip this
- step if you are using the independant method of Perl module
- installation.
- </para>
-
- <para>When you run <command>./checksetup.pl</command> to create
+ When you run <command>./checksetup.pl</command> to create
the <filename>localconfig</filename> file, it will list the Perl
modules it finds. If one is missing, go back and double-check the
- module installation from the CPAN shell, then delete the
- <filename>localconfig</filename> file and try again.</para>
+ module installation from <xref linkend="install-perlmodules-nonroot"/>,
+ then delete the <filename>localconfig</filename> file and try again.
+ </para>
<warning>
- <para>The one option in <filename>localconfig</filename> you
+ <para>One option in <filename>localconfig</filename> you
might have problems with is the web server group. If you can't
successfully browse to the <filename>index.cgi</filename> (like
a Forbidden error), you may have to relax your permissions,