diff options
Diffstat (limited to 'template/en/default/setup/strings.txt.pl')
| -rw-r--r-- | template/en/default/setup/strings.txt.pl | 192 |
1 files changed, 96 insertions, 96 deletions
diff --git a/template/en/default/setup/strings.txt.pl b/template/en/default/setup/strings.txt.pl index cb0ac4fe9..f994ee466 100644 --- a/template/en/default/setup/strings.txt.pl +++ b/template/en/default/setup/strings.txt.pl @@ -16,16 +16,17 @@ # Please keep the strings in alphabetical order by their name. %strings = ( - all_optional_features_require => 'All optional features above require the following modules to be found:', - any => 'any', - apachectl_failed => <<END, + all_optional_features_require => + 'All optional features above require the following modules to be found:', + any => 'any', + apachectl_failed => <<END, WARNING: We could not check the configuration of Apache. This sometimes happens when you are not running checksetup.pl as ##root##. To see the problem we ran into, run: ##command## END - bad_executable => 'not a valid executable: ##bin##', - blacklisted => '(blacklisted)', - bz_schema_exists_before_220 => <<'END', + bad_executable => 'not a valid executable: ##bin##', + blacklisted => '(blacklisted)', + bz_schema_exists_before_220 => <<'END', You are upgrading from a version before 2.20, but the bz_schema table already exists. This means that you restored a mysqldump into the Bugzilla database without first dropping the already-existing Bugzilla database, @@ -37,32 +38,31 @@ not contain the bz_schema table. If for some reason you cannot do this, you can connect to your MySQL database and drop the bz_schema table, as a last resort. END - checking_for => 'Checking for', - chmod_failed => '##path##: Failed to change permissions: ##error##', - chown_failed => '##path##: Failed to change ownership: ##error##', - commands_dbd => <<EOT, + checking_for => 'Checking for', + chmod_failed => '##path##: Failed to change permissions: ##error##', + chown_failed => '##path##: Failed to change ownership: ##error##', + commands_dbd => <<EOT, YOU MUST RUN ONE OF THE FOLLOWING COMMANDS (depending on which database you use): EOT - commands_optional => 'COMMANDS TO INSTALL OPTIONAL MODULES:', - commands_required => <<EOT, + commands_optional => 'COMMANDS TO INSTALL OPTIONAL MODULES:', + commands_required => <<EOT, COMMANDS TO INSTALL REQUIRED MODULES (You *must* run all these commands and then re-run checksetup.pl): EOT - continue_without_answers => <<'END', + continue_without_answers => <<'END', Re-run checksetup.pl in interactive mode (without an 'answers' file) to continue. END - cpanfile_created => "##file## created", - cpan_bugzilla_home => - "WARNING: Using the Bugzilla directory as the CPAN home.", - db_enum_setup => "Setting up choices for standard drop-down fields:", - db_schema_init => "Initializing bz_schema...", - db_table_new => "Adding new table ##table##...", - db_table_setup => "Creating tables...", - done => 'done.', - enter_or_ctrl_c => "Press Enter to continue or Ctrl-C to exit...", - error_localconfig_read => <<'END', + cpanfile_created => "##file## created", + cpan_bugzilla_home => "WARNING: Using the Bugzilla directory as the CPAN home.", + db_enum_setup => "Setting up choices for standard drop-down fields:", + db_schema_init => "Initializing bz_schema...", + db_table_new => "Adding new table ##table##...", + db_table_setup => "Creating tables...", + done => 'done.', + enter_or_ctrl_c => "Press Enter to continue or Ctrl-C to exit...", + error_localconfig_read => <<'END', An error has occurred while reading the ##localconfig## file. The text of the error message is: @@ -75,24 +75,24 @@ localconfig file: $ mv -f localconfig localconfig.old $ ./checksetup.pl END - extension_must_return_name => <<END, + extension_must_return_name => <<END, ##file## returned ##returned##, which is not a valid name for an extension. Extensions must return their name, not <code>1</code> or a number. See the documentation of Bugzilla::Extension for details. END - file_remove => 'Removing ##name##...', - file_rename => 'Renaming ##from## to ##to##...', - header => "* This is Bugzilla ##bz_ver## on perl ##perl_ver##\n" - . "* Running on ##os_name## ##os_ver##", - installation_failed => '*** Installation aborted. Read the messages above. ***', - install_data_too_long => <<EOT, + file_remove => 'Removing ##name##...', + file_rename => 'Renaming ##from## to ##to##...', + header => "* This is Bugzilla ##bz_ver## on perl ##perl_ver##\n" + . "* Running on ##os_name## ##os_ver##", + installation_failed => '*** Installation aborted. Read the messages above. ***', + install_data_too_long => <<EOT, WARNING: Some of the data in the ##table##.##column## column is longer than its new length limit of ##max_length## characters. The data that needs to be fixed is printed below with the value of the ##id_column## column first and then the value of the ##column## column that needs to be fixed: EOT - lc_new_vars => <<'END', + lc_new_vars => <<'END', This version of Bugzilla contains some variables that you may want to change and adapt to your local settings. The following variables are new to ##localconfig## since you last ran checksetup.pl: @@ -102,11 +102,11 @@ new to ##localconfig## since you last ran checksetup.pl: Please edit the file ##localconfig## and then re-run checksetup.pl to complete your installation. END - lc_old_vars => <<'END', + lc_old_vars => <<'END', The following variables are no longer used in ##localconfig##, and have been moved to ##old_file##: ##vars## END - localconfig_attachment_base => <<'END', + localconfig_attachment_base => <<'END', When the runtime allow_attachment_display parameter is on, it is possible for a malicious attachment to steal your cookies or perform an attack using your credentials. @@ -124,7 +124,7 @@ attachments to accessing only other attachments on the same bug. Remember, though, that all those possible domain names must point to this same instance. END - localconfig_create_htaccess => <<'END', + localconfig_create_htaccess => <<'END', If you are using Apache as your web server, Bugzilla can create .htaccess files for you, which will keep this file (localconfig) and other confidential files from being read over the web. @@ -134,62 +134,62 @@ they don't exist. If this is set to 0, checksetup.pl will not create .htaccess files. END - localconfig_cvsbin => <<'END', + localconfig_cvsbin => <<'END', If you want to use the CVS integration of the Patch Viewer, please specify the full path to the "cvs" executable here. END - localconfig_datadog_host => 'hostname of datadog stats daemon', - localconfig_datadog_port => 'port of datadog stats daemon, defaults to 8125', - localconfig_db_check => <<'END', + localconfig_datadog_host => 'hostname of datadog stats daemon', + localconfig_datadog_port => 'port of datadog stats daemon, defaults to 8125', + localconfig_db_check => <<'END', Should checksetup.pl try to verify that your database setup is correct? With some combinations of database servers/Perl modules/moonphase this doesn't work, and so you can try setting this to 0 to make checksetup.pl run. END - localconfig_db_driver => <<'END', + localconfig_db_driver => <<'END', What SQL database to use. Default is mysql. List of supported databases can be obtained by listing Bugzilla/DB directory - every module corresponds to one supported database and the name of the module (before ".pm") corresponds to a valid value for this variable. END - localconfig_db_host => <<'END', + localconfig_db_host => <<'END', The DNS name or IP address of the host that the database server runs on. END - localconfig_db_name => <<'END', + localconfig_db_name => <<'END', The name of the database. For Oracle, this is the database's SID. For SQLite, this is a name (or path) for the DB file. END - localconfig_db_pass => <<'END', + localconfig_db_pass => <<'END', Enter your database password here. It's normally advisable to specify a password for your bugzilla database user. If you use apostrophe (') or a backslash (\) in your password, you'll need to escape it by preceding it with a '\' character. (\') or (\) (It is far simpler to just not use those characters.) END - localconfig_db_port => <<'END', + localconfig_db_port => <<'END', Sometimes the database server is running on a non-standard port. If that's the case for your database server, set this to the port number that your database server is running on. Setting this to 0 means "use the default port for my database server." END - localconfig_db_sock => <<'END', + localconfig_db_sock => <<'END', MySQL Only: Enter a path to the unix socket for MySQL. If this is blank, then MySQL's compiled-in default will be used. You probably want that. END - localconfig_db_user => "Who we connect to the database as.", - localconfig_diffpath => <<'END', + localconfig_db_user => "Who we connect to the database as.", + localconfig_diffpath => <<'END', For the "Difference Between Two Patches" feature to work, we need to know what directory the "diff" bin is in. (You only need to set this if you are using that feature of the Patch Viewer.) END - localconfig_tct_bin => 'Path to tct (tocotrienol) a gpg replacement.', - localconfig_inbound_proxies => <<'END', + localconfig_tct_bin => 'Path to tct (tocotrienol) a gpg replacement.', + localconfig_inbound_proxies => <<'END', This is a list of IP addresses that we expect proxies to come from. This can be '*' if only the load balancer can connect. Setting this to '*' means that we can trust the X-Forwarded-For header. END - localconfig_index_html => <<'END', + localconfig_index_html => <<'END', Most web servers will allow you to use index.cgi as a directory index, and many come preconfigured that way, but if yours doesn't then you'll need an index.html file that provides redirection @@ -199,45 +199,45 @@ NOTE: checksetup.pl will not replace an existing file, so if you wish to have checksetup.pl create one for you, you must make sure that index.html doesn't already exist. END - localconfig_interdiffbin => <<'END', + localconfig_interdiffbin => <<'END', If you want to use the "Difference Between Two Patches" feature of the Patch Viewer, please specify the full path to the "interdiff" executable here. END - localconfig_memcached_servers => <<'END', + localconfig_memcached_servers => <<'END', If this option is set, Bugzilla will integrate with Memcached. Specify one or more servers, separated by spaces, using hostname:port notation (for example: 127.0.0.1:11211). END - localconfig_memcached_namespace => <<'END', + localconfig_memcached_namespace => <<'END', Specify a string to prefix each key on Memcached. END - localconfig_ses_username => <<'END', + localconfig_ses_username => <<'END', Username for HTTP Basic Authentication in front of the SES bounce handler. END - localconfig_ses_password => <<'END', + localconfig_ses_password => <<'END', Password for HTTP Basic Authentication in front of the SES bounce handler. END - localconfig_site_wide_secret => <<'END', + localconfig_site_wide_secret => <<'END', This secret key is used by your installation for the creation and validation of encrypted tokens. These tokens are used to implement security features in Bugzilla, to protect against certain types of attacks. A random string is generated by default. It's very important that this key is kept secret. It also must be very long. END - localconfig_param_override => <<'END', + localconfig_param_override => <<'END', This hash is used by BMO to override select data/params values on a per-webhead basis. Keys set to undef will default to the value in data/params. Only the keys listed below can be overridden. END - localconfig_urlbase => <<'END', + localconfig_urlbase => <<'END', The URL that is the common initial leading part of all URLs. END - localconfig_canonical_urlbase => <<'END', + localconfig_canonical_urlbase => <<'END', The URL that is the canonical initial leading part of all URLs. This will be the production url for a dev site, for instance. END - localconfig_use_suexec => <<'END', + localconfig_use_suexec => <<'END', Set this to 1 if Bugzilla runs in an Apache SuexecUserGroup environment. If your web server runs control panel software (cPanel, Plesk or similar), @@ -252,7 +252,7 @@ a normal webserver environment. If set to 1, checksetup.pl will set file permissions so that Bugzilla works in a SuexecUserGroup environment. END - localconfig_webservergroup => <<'END', + localconfig_webservergroup => <<'END', The name of the group that your web server runs as. On Red Hat distributions, this is usually "apache". On Debian/Ubuntu, it is usually "www-data". @@ -272,28 +272,28 @@ and you cannot set this up any other way. YOU HAVE BEEN WARNED! If you set this to anything other than "", you will need to run checksetup.pl as ##root## or as a user who is a member of the specified group. END - localconfig_apache_size_limit => <<EOT, + localconfig_apache_size_limit => <<EOT, This is the max amount of unshared memory the apache process is allowed to use before Apache::SizeLimit kills it. This is only applicable when run under mod_perl. EOT - localconfig_shadowdb_user => <<EOT, + localconfig_shadowdb_user => <<EOT, The username used to authenticate to the shadow db. EOT - localconfig_shadowdb_pass => <<EOT, + localconfig_shadowdb_pass => <<EOT, The password used to authenticate to the shadow db. EOT - max_allowed_packet => <<EOT, + max_allowed_packet => <<EOT, WARNING: You need to set the max_allowed_packet parameter in your MySQL configuration to at least ##needed##. Currently it is set to ##current##. You can set this parameter in the [mysqld] section of your MySQL configuration file. EOT - min_version_required => "Minimum version required: ", + min_version_required => "Minimum version required: ", # Note: When translating these "modules" messages, don't change the formatting # if possible, because there is hardcoded formatting in # Bugzilla::Install::Requirements to match the box formatting. - modules_message_apache => <<END, + modules_message_apache => <<END, *********************************************************************** * APACHE MODULES * *********************************************************************** @@ -308,7 +308,7 @@ EOT * The modules you need to enable are: * * * END - modules_message_db => <<EOT, + modules_message_db => <<EOT, *********************************************************************** * DATABASE ACCESS * *********************************************************************** @@ -317,7 +317,7 @@ END * running. See below for the correct command to run to install the * * appropriate module for your database. * EOT - modules_message_optional => <<EOT, + modules_message_optional => <<EOT, *********************************************************************** * OPTIONAL MODULES * *********************************************************************** @@ -329,7 +329,7 @@ EOT * with the name of the feature they enable. Below that table are the * * commands to install each module. * EOT - modules_message_required => <<EOT, + modules_message_required => <<EOT, *********************************************************************** * REQUIRED MODULES * *********************************************************************** @@ -338,30 +338,30 @@ EOT * See below for commands to install these modules. * EOT - module_found => "found v##ver##", - module_not_found => "not found", - module_ok => 'ok', - module_unknown_version => "found unknown version", - no_such_module => "There is no Perl module on CPAN named ##module##.", - mysql_innodb_disabled => <<'END', + module_found => "found v##ver##", + module_not_found => "not found", + module_ok => 'ok', + module_unknown_version => "found unknown version", + no_such_module => "There is no Perl module on CPAN named ##module##.", + mysql_innodb_disabled => <<'END', InnoDB is disabled in your MySQL installation. Bugzilla requires InnoDB to be enabled. Please enable it and then re-run checksetup.pl. END - mysql_innodb_settings => <<'END', + mysql_innodb_settings => <<'END', Bugzilla requires the following MySQL InnoDB settings: innodb_file_format = Barracuda innodb_file_per_table = 1 innodb_large_prefix = 1 END - mysql_index_renaming => <<'END', + mysql_index_renaming => <<'END', We are about to rename old indexes. The estimated time to complete renaming is ##minutes## minutes. You cannot interrupt this action once it has begun. If you would like to cancel, press Ctrl-C now... (Waiting 45 seconds...) END - mysql_row_format_conversion => "Converting ##table## to row format ##format##.", - mysql_utf8_conversion => <<'END', + mysql_row_format_conversion => "Converting ##table## to row format ##format##.", + mysql_utf8_conversion => <<'END', WARNING: We are about to convert your table storage format to UTF-8. This allows Bugzilla to correctly store and sort international characters. However, if you have any non-UTF-8 data in your database, @@ -376,7 +376,7 @@ WARNING: We are about to convert your table storage format to UTF-8. This If you ever used a version of Bugzilla before 2.22, we STRONGLY recommend that you stop checksetup.pl NOW and run contrib/recode.pl. END - no_checksetup_from_cgi => <<END, + no_checksetup_from_cgi => <<END, <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> <html> @@ -401,49 +401,49 @@ END </body> </html> END - patchutils_missing => <<'END', + patchutils_missing => <<'END', OPTIONAL NOTE: If you want to be able to use the 'difference between two patches' feature of Bugzilla (which requires the PatchReader Perl module as well), you should install patchutils from: http://cyberelk.net/tim/patchutils/ END - template_precompile => "Precompiling templates...", - template_removal_failed => <<END, + template_precompile => "Precompiling templates...", + template_removal_failed => <<END, WARNING: The directory '##template_cache##' could not be removed. It has been moved into '##deleteme##', which should be deleted manually to conserve disk space. END - template_removing_dir => "Removing existing compiled templates...", - update_cf_invalid_name => - "Removing custom field '##field##', because it has an invalid name...", - update_flags_bad_name => <<'END', + template_removing_dir => "Removing existing compiled templates...", + update_cf_invalid_name => + "Removing custom field '##field##', because it has an invalid name...", + update_flags_bad_name => <<'END', "##flag##" is not a valid name for a flag. Rename it to not have any spaces or commas. END - update_nomail_bad => <<'END', + update_nomail_bad => <<'END', WARNING: The following users were listed in ##data##/nomail, but do not have an account here. The unmatched entries have been moved to ##data##/nomail.bad: END - update_summary_truncate_comment => - "The original value of the Summary field was longer than 255" - . " characters, and so it was truncated during an upgrade." - . " The original summary was:\n\n##summary##", - update_summary_truncated => <<'END', + update_summary_truncate_comment => + "The original value of the Summary field was longer than 255" + . " characters, and so it was truncated during an upgrade." + . " The original summary was:\n\n##summary##", + update_summary_truncated => <<'END', WARNING: Some of your bugs had summaries longer than 255 characters. They have had their original summary copied into a comment, and then the summary was truncated to 255 characters. The affected bug numbers were: END - update_quips => <<'END', + update_quips => <<'END', Quips are now stored in the database, rather than in an external file. The quips previously stored in ##data##/comments have been copied into the database, and that file has been renamed to ##data##/comments.bak You may delete the renamed file once you have confirmed that all your quips were moved successfully. END - update_queries_to_tags => "Populating the new 'tag' table:", - webdot_bad_htaccess => <<END, + update_queries_to_tags => "Populating the new 'tag' table:", + webdot_bad_htaccess => <<END, WARNING: Dependency graph images are not accessible. Delete ##dir##/.htaccess and re-run checksetup.pl. END |