From bf8ac7551058df22dd5eb712631d9e383fc587a5 Mon Sep 17 00:00:00 2001 From: "barnboy%trilobyte.net" <> Date: Wed, 22 Aug 2001 10:44:14 +0000 Subject: Big checkin of docs to resolve every known outstanding doc bug! Yay release. Still many things to fix. Aren't there always? --- docs/sgml/administration.sgml | 220 +++++++++++++++++++++++++++++++----------- 1 file changed, 162 insertions(+), 58 deletions(-) (limited to 'docs/sgml/administration.sgml') diff --git a/docs/sgml/administration.sgml b/docs/sgml/administration.sgml index 0f290da31..54f984fbc 100644 --- a/docs/sgml/administration.sgml +++ b/docs/sgml/administration.sgml @@ -8,18 +8,21 @@ - So you followed the installation instructions to the letter, and - just logged into bugzilla with your super-duper god account and - you are sitting at the query screen. Yet, you have nothing to - query. Your first act of business needs to be to setup the - operating parameters for bugzilla. + So you followed to the + letter, and logged into Bugzilla for the very first time with your + super-duper god account. You sit, contentedly staring at the + Bugzilla Query Screen, the worst of the whole mad business of + installing this terrific program behind you. It seems, though, you + have nothing yet to query! Your first act of business should be to + setup the operating parameters for Bugzilla so you can get busy + getting data into your bug tracker.
Post-Installation Checklist - After installation, follow the checklist below to ensure that - you have a successful installation. If you do not see a + After installation, follow the checklist below to help ensure + that you have a successful installation. If you do not see a recommended setting for a parameter, consider leaving it at the default while you perform your initial tests on your Bugzilla setup. @@ -30,47 +33,80 @@ - Bring up "editparams.cgi" in your web browser. For - instance, to edit parameters at mozilla.org, the URL would - be - http://bugzilla.mozilla.org/editparams.cgi, also - available under the "edit parameters" link on your query - page. + Bring up editparams.cgi in your web + browser. This should be available as the edit + parameters link from any Bugzilla screen once you + have logged in. + The maintainer is the email address of + the person responsible for maintaining this Bugzilla + installation. The maintainer need not be a valid Bugzilla + user. Error pages, error emails, and administrative mail + will be sent with the maintainer as the return email + address. - Set "maintainer" to your email address. + Set maintainer to your email address. This allows Bugzilla's error messages to display your email address and allow people to contact you for help. + The urlbase parameter defines the fully + qualified domain name and web server path to your Bugzilla + installation. - Set "urlbase" to the URL reference for your Bugzilla - installation. If your bugzilla query page is at - http://www.foo.com/bugzilla/query.cgi, your url base is - http://www.foo.com/bugzilla/ + For example, if your bugzilla query page is + http://www.foo.com/bugzilla/query.cgi, set your + urlbase is http://www.foo.com/bugzilla/. + usebuggroups dictates whether or not to + implement group-based security for Bugzilla. If set, + Bugzilla bugs can have an associated groupmask defining + which groups of users are allowed to see and edit the + bug. Set "usebuggroups" to "on" only if you - need to restrict access to products. I suggest leaving this - parameter off while initially testing - your Bugzilla. + may wish to restrict access to products. I suggest leaving + this parameter off while initially + testing your Bugzilla. - Set "usebuggroupsentry" to "on" if you want to restrict - access to products. Once again, if you are simply testing + usebuggroupsentry, when set to + on, requires that all bugs have an associated + groupmask when submitted. This parameter is made for those + installations where product isolation is a necessity. + + + Set "usebuggroupsentry" to "on" if you absolutely need to + restrict access to bugs from the moment they are submitted + through resolution. Once again, if you are simply testing your installation, I suggest against turning this parameter on; the strict security checking may stop you from being able to modify your new entries. + + You run into an interesting problem when Bugzilla reaches a + high level of continuous activity. MySQL supports only + table-level write locking. What this means is that if + someone needs to make a change to a bug, they will lock the + entire table until the operation is complete. Locking for + write also blocks reads until the write is complete. The + shadowdb parameter was designed to get around + this limitation. While only a single user is allowed to + write to a table at a time, reads can continue unimpeded on + a read-only shadow copy of the database. Although your + database size will double, a shadow database can cause an + enormous performance improvement when implemented on + extremely high-traffic Bugzilla databases. + Set "shadowdb" to "bug_shadowdb" if you will be running a *very* large installation of Bugzilla. The shadow database @@ -79,15 +115,19 @@ Enabling "shadowdb" can adversely affect the stability - of your installation of Bugzilla. You may frequently - need to manually synchronize your databases, or schedule - nightly syncs via "cron" + of your installation of Bugzilla. You should regularly + check that your database is in sync. It is often + advisable to force a shadow database sync nightly via + cron. Once again, in testing you should avoid this option -- use it if or when you need to use it, and have repeatedly run into the problem it was designed to solve -- very long wait times while attempting to commit - a change to the database. + a change to the database. Mozilla.org began needing + shadowdb when they reached around 40,000 + Bugzilla users with several hundred Bugzilla bug changes and + comments per day. If you use the "shadowdb" option, it is only natural that @@ -97,6 +137,18 @@ + headerhtml, footerhtml, + errorhtml, bannerhtml, and + blurbhtml are all templates which control + display of headers, footers, errors, banners, and additional + data. We could go into some detail regarding the usage of + these, but it is really best just to monkey around with them + a bit to see what they do. I strongly recommend you copy + your data/params file somewhere safe + before playing with these values, though. If they are + changed dramatically, it may make it impossible for you to + display Bugzilla pages to fix the problem until you have + restored your data/params file. If you have custom logos or HTML you must put in place to fit within your site design guidelines, place the code in @@ -105,15 +157,20 @@ The "headerhtml" text box is the HTML printed out - before any other code on the page. - If you have a special banner, put the code for it in - "bannerhtml". You may want to leave these settings at - the defaults initially. + before any other code on the page, + except the CONTENT-TYPE header sent by the Bugzilla + engine. If you have a special banner, put the code for + it in "bannerhtml". You may want to leave these settings + at the defaults initially. + passwordmail is rather simple. Every + time a user creates an account, the text of this parameter + is read as the text to send to the new user along with their + password message. Add any text you wish to the "passwordmail" parameter box. For instance, many people choose to use this box to give a @@ -121,20 +178,32 @@ - - Ensure "newemailtech" is "on". Your users will thank you. - This is the default in the post-2.12 world, and is only an - issue if you are upgrading. - - - + useqacontact allows you to define an + email address for each component, in addition to that of the + default owner, who will be sent carbon copies of incoming + bugs. The critical difference between a QA Contact and an + Owner is that the QA Contact follows the component. If you + reassign a bug from component A to component B, the QA + Contact for that bug will change with the reassignment, + regardless of owner. + usestatuswhiteboard defines whether you + wish to have a free-form, overwritable field associated with + each bug. The advantage of the Status Whiteboard is that it + can be deleted or modified with ease, and provides an + easily-searchable field for indexing some bugs that have + some trait in common. Many people will put help + wanted, stalled, or waiting + on reply from somebody messages into the Status + Whiteboard field so those who peruse the bugs are aware of + their status even more than that which can be indicated by + the Resolution fields. Do you want to use the QA Contact ("useqacontact") and status whiteboard ("usestatuswhiteboard") fields? These fields are useful because they allow for more flexibility, particularly when you have an existing Quality Assurance and/or Release Engineering team, but they may not be needed - for smaller installations. + for many smaller installations. @@ -144,14 +213,22 @@ they have untouched new bugs. If you do not plan to use this feature, simply do not set up the whining cron job described in the installation instructions, or set this - value to "0". + value to "0" (never whine). + commenton fields allow you to dictate + what changes can pass without comment, and which must have a + comment from the person who changed them. Often, + administrators will allow users to add themselves to the CC + list, accept bugs, or change the Status Whiteboard without + adding a comment as to their reasons for the change, yet + require that most other changes come with an + explanation. Set the "commenton" options according to your site policy. It is a wise idea to require comments when users resolve, - reassign, or reopen bugs. + reassign, or reopen bugs at the very least. It is generally far better to require a developer @@ -164,12 +241,28 @@ + The supportwatchers option can be an + exceptionally powerful tool in the hands of a power Bugzilla + user. By enabling this option, you allow users to receive + email updates whenever other users receive email updates. + This is, of course, subject to the groupset restrictions on + the bug; if the watcher would not normally be + allowed to view a bug, the watcher cannot get around the + system by setting herself up to watch the bugs of someone + with bugs outside her priveleges. She would still only + receive email updates for those bugs she could normally + view. + For Bugzilla sites which require strong inter-Product + security to prevent snooping, watchers are not a good + idea. - Set "supportwatchers" to "On". This feature is helpful for - team leads to monitor progress in their respective areas, - and can offer many other benefits, such as allowing a - developer to pick up a former engineer's bugs without - requiring her to change all the information in the bug. + However, for most sites you should set + supportwatchers to "On". This feature is + helpful for team leads to monitor progress in their + respective areas, and can offer many other benefits, such as + allowing a developer to pick up a former engineer's bugs + without requiring her to change all the information in the + bug. @@ -205,6 +298,9 @@ groupset=0x7ffffffffffffff where login_name = "(user's login name)"; + Yes, that is fourteen + f's. A whole lot of f-ing going on if you + want to create a new administator.
@@ -269,11 +365,11 @@ right-hand side of the text entry box. You can match what you type as a case-insensitive substring (the default) of all users on your system, a case-sensitive - regular expression (please see the "man regexp" manual - page for details on regular expression syntax), or a - reverse regular expression match, - where every user name which does NOT match the regular - expression is selected. + regular expression (please see the man + regexp manual page for details on regular + expression syntax), or a reverse + regular expression match, where every user name which + does NOT match the regular expression is selected. @@ -292,10 +388,14 @@ Adding a user this way will not send an email informing them of their username and - password. In general, it is preferable to log out and - use the "New Account" button to create users, as it - will pre-populate all the required fields and also - notify the user of her account name and password. + password. While useful for creating dummy accounts + (watchers which shuttle mail to another system, for + instance, or email addresses which are a mailing + list), in general it is preferable to log out and use + the New Account button to create users, + as it will pre-populate all the required fields and + also notify the user of her account name and + password. @@ -317,6 +417,11 @@ Don't disable your own administrative account, or you will hate life! + At this time, Disabled Text does not + prevent a user from using the email interface. If you + have the email interface enabled, they can still + continue to submit bugs and comments that way. We need + a patch to fix this. @@ -350,9 +455,8 @@ - Password: You will only see - asterisks in versions of Bugzilla newer than 2.10 or - early 2.11. You can change the user password here. + Password: You can change the user + password here. It is normal to only see asterisks. -- cgit v1.2.3-24-g4f1b