#!/usr/bin/perl -w # -*- Mode: perl; indent-tabs-mode: nil -*- # # The contents of this file are subject to the Mozilla Public # License Version 1.1 (the "License"); you may not use this file # except in compliance with the License. You may obtain a copy of # the License at http://www.mozilla.org/MPL/ # # Software distributed under the License is distributed on an "AS # IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or # implied. See the License for the specific language governing # rights and limitations under the License. # # The Original Code is mozilla.org code. # # The Initial Developer of the Original Code is Holger # Schurig. Portions created by Holger Schurig are # Copyright (C) 1999 Holger Schurig. All # Rights Reserved. # # Contributor(s): Holger Schurig # Terry Weissman # Dan Mosedale # Dave Miller # Zach Lipton # Jacob Steenhagen # Bradley Baetz # Tobias Burnus # Shane H. W. Travis # Gervase Markham # Erik Stambaugh # Dave Lawrence # Max Kanat-Alexander # Joel Peshkin # # # # Hey, what's this? # # 'checksetup.pl' is a script that is supposed to run during installation # time and also after every upgrade. # # The goal of this script is to make the installation even easier. # It does this by doing things for you as well as testing for problems # in advance. # # You can run the script whenever you like. You SHOULD run it after # you update Bugzilla, because it may then update your SQL table # definitions to resync them with the code. # # Currently, this module does the following: # # - check for required perl modules # - set defaults for local configuration variables # - create and populate the data directory after installation # - set the proper rights for the *.cgi, *.html, etc. files # - verify that the code can access the database server # - creates the database 'bugs' if it does not exist # - creates the tables inside the database if they don't exist # - automatically changes the table definitions if they are from # an older version of Bugzilla # - populates the groups # - put the first user into all groups so that the system can # be administrated # - changes preexisting SQL tables if you change your local # settings, e.g. when you add a new platform # - ... and a whole lot more. # # There should be no need for Bugzilla Administrators to modify # this script; all user-configurable stuff has been moved # into a local configuration file called 'localconfig'. When that file # in changed and 'checkconfig.pl' is run, then the user's changes # will be reflected back into the database. # # Developers, however, have to modify this file at various places. To # make this easier, there are some special tags for which one # can search. # # To Search for # # add/delete local configuration variables --LOCAL-- # check for more required modules --MODULES-- # change the defaults for local configuration vars --LOCAL-- # update the assigned file permissions --CHMOD-- # add more database-related checks --DATABASE-- # change table definitions --TABLE-- # add more groups --GROUPS-- # add user-adjustable sttings --SETTINGS-- # create initial administrator account --ADMIN-- # # Note: sometimes those special comments occur more than once. For # example, --LOCAL-- is used at least 3 times in this code! --TABLE-- # is also used more than once, so search for each and every occurrence! # # To operate checksetup non-interactively, run it with a single argument # specifying a filename that contains the information usually obtained by # prompting the user or by editing localconfig. # # The format of that file is as follows: # # # $answer{'db_host'} = q[ # $db_host = 'localhost'; # $db_driver = 'mydbdriver'; # $db_port = 3306; # $db_name = 'mydbname'; # $db_user = 'mydbuser'; # ]; # # $answer{'db_pass'} = q[$db_pass = 'mydbpass';]; # # $answer{'ADMIN_OK'} = 'Y'; # $answer{'ADMIN_EMAIL'} = 'myadmin@mydomain.net'; # $answer{'ADMIN_PASSWORD'} = 'fooey'; # $answer{'ADMIN_REALNAME'} = 'Joel Peshkin'; # # $answer{'SMTP_SERVER'} = 'mail.mydomain.net'; # # # Note: Only information that supersedes defaults from LocalVar() # function calls needs to be specified in this file. # use strict; BEGIN { if ($^O =~ /MSWin32/i) { require 5.008001; # for CGI 2.93 or higher } require 5.006_001; use File::Basename; chdir dirname($0); } use lib "."; use vars qw( $db_name %answer ); use Bugzilla::Constants; my $silent; my %switch; $switch{'no_templates'} = grep(/^--no-templates$/, @ARGV) || grep(/^-t$/, @ARGV); # The use of some Bugzilla modules brings in modules we need to test for # Check first, via BEGIN BEGIN { # However, don't run under -c (because of tests) if (!$^C) { ########################################################################### # Check for help request. Display help page if --help/-h/-? was passed. ########################################################################### my $help = grep(/^--help$/, @ARGV) || grep (/^-h$/, @ARGV) || grep (/^-\?$/, @ARGV) || 0; help_page() if $help; sub help_page { my $programname = $0; $programname =~ s#^\./##; print "$programname - checks your setup and updates your Bugzilla installation\n"; print "\nUsage: $programname [SCRIPT [--verbose]] [--check-modules|--help]\n"; print " [--no-templates]\n"; print "\n"; print " --help Display this help text.\n"; print " --check-modules Only check for correct module dependencies and quit thereafter;\n"; print " does not perform any changes.\n"; print " --no-templates (-t) Don't compile the templates at all. Existing\n"; print " compiled templates will remain; missing compiled\n"; print " templates will not be created. (Used primarily by\n"; print " developers to speed up checksetup.) Use this\n"; print " switch at your own risk.\n"; print " SCRIPT Name of script to drive non-interactive mode.\n"; print " This script should define an \%answer hash whose\n"; print " keys are variable names and the values answers to\n"; print " all the questions checksetup.pl asks.\n"; print " (See comments at top of $programname for more info.)\n"; print " --verbose Output results of SCRIPT being processed.\n"; print "\n"; exit 1; } ########################################################################### # Non-interactive override. Pass a filename on the command line which is # a Perl script. This script defines a %answer hash whose names are tags # and whose values are answers to all the questions checksetup.pl asks. # Grep this file for references to that hash to see the tags to use for the # possible answers. One example is ADMIN_EMAIL. ########################################################################### if ($ARGV[0] && ($ARGV[0] !~ /^-/)) { do $ARGV[0] or ($@ && die("Error $@ processing $ARGV[0]")) or die("Error $! processing $ARGV[0]"); $silent = !grep(/^--no-silent$/, @ARGV) && !grep(/^--verbose$/, @ARGV); } ########################################################################### # Check required module ########################################################################### # # Here we check for --MODULES-- # print "\nChecking perl modules ...\n" unless $silent; # vers_cmp is adapted from Sort::Versions 1.3 1996/07/11 13:37:00 kjahds, # which is not included with Perl by default, hence the need to copy it here. # Seems silly to require it when this is the only place we need it... sub vers_cmp { if (@_ < 2) { die "not enough parameters for vers_cmp" } if (@_ > 2) { die "too many parameters for vers_cmp" } my ($a, $b) = @_; my (@A) = ($a =~ /(\.|\d+|[^\.\d]+)/g); my (@B) = ($b =~ /(\.|\d+|[^\.\d]+)/g); my ($A,$B); while (@A and @B) { $A = shift @A; $B = shift @B; if ($A eq "." and $B eq ".") { next; } elsif ( $A eq "." ) { return -1; } elsif ( $B eq "." ) { return 1; } elsif ($A =~ /^\d+$/ and $B =~ /^\d+$/) { return $A <=> $B if $A <=> $B; } else { $A = uc $A; $B = uc $B; return $A cmp $B if $A cmp $B; } } @A <=> @B; } # This was originally clipped from the libnet Makefile.PL, adapted here to # use the above vers_cmp routine for accurate version checking. sub have_vers { my ($pkg, $wanted) = @_; my ($msg, $vnum, $vstr); no strict 'refs'; printf("Checking for %15s %-9s ", $pkg, !$wanted?'(any)':"(v$wanted)") unless $silent; # Modules may change $SIG{__DIE__} and $SIG{__WARN__}, so localise them here # so that later errors display 'normally' local $::SIG{__DIE__}; local $::SIG{__WARN__}; eval "require $pkg;"; # do this twice to avoid a "used only once" error for these vars $vnum = ${"${pkg}::VERSION"} || ${"${pkg}::Version"} || 0; $vnum = ${"${pkg}::VERSION"} || ${"${pkg}::Version"} || 0; $vnum = -1 if $@; # CGI's versioning scheme went 2.75, 2.751, 2.752, 2.753, 2.76 # That breaks the standard version tests, so we need to manually correct # the version if ($pkg eq 'CGI' && $vnum =~ /(2\.7\d)(\d+)/) { $vnum = $1 . "." . $2; } if ($vnum eq "-1") { # string compare just in case it's non-numeric $vstr = "not found"; } elsif (vers_cmp($vnum,"0") > -1) { $vstr = "found v$vnum"; } else { $vstr = "found unknown version"; } my $vok = (vers_cmp($vnum,$wanted) > -1); print ((($vok) ? "ok: " : " "), "$vstr\n") unless $silent; return $vok; } # Check versions of dependencies. 0 for version = any version acceptable my $modules = [ { name => 'AppConfig', version => '1.52' }, { name => 'CGI', version => '2.93' }, { name => 'Data::Dumper', version => '0' }, { name => 'Date::Format', version => '2.21' }, { name => 'DBI', version => '1.38' }, { name => 'File::Spec', version => '0.84' }, { name => 'File::Temp', version => '0' }, { name => 'Template', version => '2.08' }, { name => 'Text::Wrap', version => '2001.0131' }, { name => 'Mail::Mailer', version => '1.67' }, { name => 'MIME::Base64', version => $^O =~ /MSWin32/i ? '3.01' : '3.03' }, { name => 'MIME::Parser', version => '5.406' }, { name => 'Storable', version => '0' }, ]; my %ppm_modules = ( 'AppConfig' => 'AppConfig', 'Chart::Base' => 'Chart', 'CGI' => 'CGI', 'Data::Dumper' => 'Data-Dumper', 'Date::Format' => 'TimeDate', 'DBI' => 'DBI', 'DBD::mysql' => 'DBD-mysql', 'Template' => 'Template-Toolkit', 'PatchReader' => 'PatchReader', 'GD' => 'GD', 'GD::Graph' => 'GDGraph', 'GD::Text::Align' => 'GDTextUtil', 'Mail::Mailer' => 'MailTools', 'Mail::Base64' => 'MIME-Base64', 'MIME::Parser' => 'MIME-Tools', ); sub install_command { my $module = shift; if ($^O =~ /MSWin32/i) { return "ppm install " . $ppm_modules{$module} if exists $ppm_modules{$module}; return "ppm install " . $module; } else { return "$^X -MCPAN -e 'install \"$module\"'"; } } $::root = ($^O =~ /MSWin32/i ? 'Administrator' : 'root'); my %missing = (); foreach my $module (@{$modules}) { unless (have_vers($module->{name}, $module->{version})) { $missing{$module->{name}} = $module->{version}; } } print "\nThe following Perl modules are optional:\n" unless $silent; my $gd = have_vers("GD","1.20"); my $chartbase = have_vers("Chart::Base","1.0"); my $xmlparser = have_vers("XML::Parser",0); my $gdgraph = have_vers("GD::Graph",0); my $gdtextalign = have_vers("GD::Text::Align",0); my $patchreader = have_vers("PatchReader","0.9.4"); my $imagemagick = have_vers("Image::Magick",0); print "\n" unless $silent; if ($^O =~ /MSWin32/i && !$silent) { print "All the required modules are available at:\n"; print " http://landfill.bugzilla.org/ppm/\n"; print "You can add the repository with the following command:\n"; print " ppm rep add bugzilla http://landfill.bugzilla.org/ppm/\n\n"; } if ((!$gd || !$chartbase) && !$silent) { print "If you you want to see graphical bug charts (plotting historical "; print "data over \ntime), you should install libgd and the following Perl "; print "modules:\n\n"; print "GD: " . install_command("GD") ."\n" if !$gd; print "Chart: " . install_command("Chart::Base") . "\n" if !$chartbase; print "\n"; } if (!$xmlparser && !$silent) { print "If you want to use the bug import/export feature to move bugs to\n", "or from other bugzilla installations, you will need to install\n ", "the XML::Parser module by running (as $::root):\n\n", " " . install_command("XML::Parser") . "\n\n"; } if (!$imagemagick && !$silent) { print "If you want to convert BMP image attachments to PNG to conserve\n", "disk space, you will need to install the ImageMagick application\n ", "Available from http://www.imagemagick.org, and the Image::Magick", "Perl module by running (as $::root):\n\n", " " . install_command("Image::Magick") . "\n\n"; } if ((!$gd || !$gdgraph || !$gdtextalign) && !$silent) { print "If you you want to see graphical bug reports (bar, pie and line "; print "charts of \ncurrent data), you should install libgd and the "; print "following Perl modules:\n\n"; print "GD: " . install_command("GD") . "\n" if !$gd; print "GD::Graph: " . install_command("GD::Graph") . "\n" if !$gdgraph; print "GD::Text::Align: " . install_command("GD::Text::Align") . "\n" if !$gdtextalign; print "\n"; } if (!$patchreader && !$silent) { print "If you want to see pretty HTML views of patches, you should "; print "install the \nPatchReader module:\n"; print "PatchReader: " . install_command("PatchReader") . "\n"; } if (%missing) { print "\n\n"; print "Bugzilla requires some Perl modules which are either missing from\n", "your system, or the version on your system is too old.\n", "They can be installed by running (as $::root) the following:\n"; foreach my $module (keys %missing) { print " " . install_command("$module") . "\n"; if ($missing{$module} > 0) { print " Minimum version required: $missing{$module}\n"; } } print "\n"; exit; } } } # Break out if checking the modules is all we have been asked to do. exit if grep(/^--check-modules$/, @ARGV); # If we're running on Windows, reset the input line terminator so that # console input works properly - loading CGI tends to mess it up if ($^O =~ /MSWin/i) { $/ = "\015\012"; } ########################################################################### # Global definitions ########################################################################### use Bugzilla::Config qw(:DEFAULT :admin :locations); # 12/17/00 justdave@syndicomm.com - removed declarations of the localconfig # variables from this location. We don't want these declared here. They'll # automatically get declared in the process of reading in localconfig, and # this way we can look in the symbol table to see if they've been declared # yet or not. ########################################################################### # Check and update local configuration ########################################################################### # # This is quite tricky. But fun! # # First we read the file 'localconfig'. Then we check if the variables we # need are defined. If not, we will append the new settings to # localconfig, instruct the user to check them, and stop. # # Why do it this way? # # Assume we will enhance Bugzilla and eventually more local configuration # stuff arises on the horizon. # # But the file 'localconfig' is not in the Bugzilla CVS or tarfile. You # know, we never want to overwrite your own version of 'localconfig', so # we can't put it into the CVS/tarfile, can we? # # Now, when we need a new variable, we simply add the necessary stuff to # checksetup. When the user gets the new version of Bugzilla from CVS and # runs checksetup, it finds out "Oh, there is something new". Then it adds # some default value to the user's local setup and informs the user to # check that to see if it is what the user wants. # # Cute, ey? # print "Checking user setup ...\n" unless $silent; $@ = undef; do $localconfig; if ($@) { # capture errors in localconfig, bug 97290 print STDERR <>', $localconfig; print FILE ($answer{$name} or $definition), "\n\n"; close FILE; } # # Set up the defaults for the --LOCAL-- variables below: # LocalVar('index_html', <<'END'); # # With the introduction of a configurable index page using the # template toolkit, Bugzilla's main index page is now index.cgi. # Most web servers will allow you to use index.cgi as a directory # index, and many come preconfigured that way, but if yours doesn't # then you'll need an index.html file that provides redirection # to index.cgi. Setting $index_html to 1 below will allow # checksetup.pl to create one for you if it doesn't exist. # NOTE: checksetup.pl will not replace an existing file, so if you # wish to have checksetup.pl create one for you, you must # make sure that index.html doesn't already exist $index_html = 0; END if (!LocalVarExists('cvsbin')) { my $cvs_executable; if ($^O !~ /MSWin32/i) { $cvs_executable = `which cvs`; if ($cvs_executable =~ /no cvs/ || $cvs_executable eq '') { # If which didn't find it, just set to blank $cvs_executable = ""; } else { chomp $cvs_executable; } } else { $cvs_executable = ""; } LocalVar('cvsbin', <<"END"); # # For some optional functions of Bugzilla (such as the pretty-print patch # viewer), we need the cvs binary to access files and revisions. # Because it's possible that this program is not in your path, you can specify # its location here. Please specify the full path to the executable. \$cvsbin = "$cvs_executable"; END } if (!LocalVarExists('interdiffbin')) { my $interdiff_executable; if ($^O !~ /MSWin32/i) { $interdiff_executable = `which interdiff`; if ($interdiff_executable =~ /no interdiff/ || $interdiff_executable eq '') { if (!$silent) { print "\nOPTIONAL NOTE: If you want to be able to "; print "use the\n 'difference between two patches' feature"; print "of Bugzilla (requires\n the PatchReader Perl module "; print "as well), you should install\n patchutils from "; print "http://cyberelk.net/tim/patchutils/\n\n"; } # If which didn't find it, set to blank $interdiff_executable = ""; } else { chomp $interdiff_executable; } } else { $interdiff_executable = ""; } LocalVar('interdiffbin', <<"END"); # # For some optional functions of Bugzilla (such as the pretty-print patch # viewer), we need the interdiff binary to make diffs between two patches. # Because it's possible that this program is not in your path, you can specify # its location here. Please specify the full path to the executable. \$interdiffbin = "$interdiff_executable"; END } if (!LocalVarExists('diffpath')) { my $diff_binaries; if ($^O !~ /MSWin32/i) { $diff_binaries = `which diff`; if ($diff_binaries =~ /no diff/ || $diff_binaries eq '') { # If which didn't find it, set to blank $diff_binaries = ""; } else { $diff_binaries =~ s:/diff\n$::; } } else { $diff_binaries = ""; } LocalVar('diffpath', <<"END"); # # The interdiff feature needs diff, so we have to have that path. # Please specify the directory name only; do not use trailing slash. \$diffpath = "$diff_binaries"; END } LocalVar('create_htaccess', <<'END'); # # If you are using Apache as your web server, Bugzilla can create .htaccess # files for you that will instruct Apache not to serve files that shouldn't # be accessed from the web (like your local configuration data and non-cgi # executable files). For this to work, the directory your Bugzilla # installation is in must be within the jurisdiction of a block # in the httpd.conf file that has 'AllowOverride Limit' in it. If it has # 'AllowOverride All' or other options with Limit, that's fine. # (Older Apache installations may use an access.conf file to store these # blocks.) # If this is set to 1, Bugzilla will create these files if they don't exist. # If this is set to 0, Bugzilla will not create these files. $create_htaccess = 1; END my $webservergroup_default; if ($^O !~ /MSWin32/i) { $webservergroup_default = 'apache'; } else { $webservergroup_default = ''; } LocalVar('webservergroup', <<"END"); # # This is the group your web server runs as. # If you have a windows box, ignore this setting. # If you do not have access to the group your web server runs under, # set this to "". If you do set this to "", then your Bugzilla installation # will be _VERY_ insecure, because some files will be world readable/writable, # and so anyone who can get local access to your machine can do whatever they # want. You should only have this set to "" if this is a testing installation # and you cannot set this up any other way. YOU HAVE BEEN WARNED! # If you set this to anything other than "", you will need to run checksetup.pl # as $::root, or as a user who is a member of the specified group. \$webservergroup = "$webservergroup_default"; END LocalVar('db_driver', ' # # What SQL database to use. Default is mysql. List of supported databases # can be obtained by listing Bugzilla/DB directory - every module corresponds # to one supported database and the name corresponds to a driver name. # $db_driver = "mysql"; '); LocalVar('db_host', q[ # # How to access the SQL database: # $db_host = 'localhost'; # where is the database? $db_name = 'bugs'; # name of the SQL database $db_user = 'bugs'; # user to attach to the SQL database # Sometimes the database server is running on a non-standard # port. If that's the case for your database server, set this # to the port number that your database server is running on. # Setting this to 0 means "use the default port for my database # server." $db_port = 0; ]); LocalVar('db_pass', q[ # # Enter your database password here. It's normally advisable to specify # a password for your bugzilla database user. # If you use apostrophe (') or a backslash (\) in your password, you'll # need to escape it by preceding it with a '\' character. (\') or (\\) # (Far simpler just not to use those characters.) # $db_pass = ''; ]); LocalVar('db_sock', q[ # MySQL Only: Enter a path to the unix socket for mysql. If this is # blank, then mysql\'s compiled-in default will be used. You probably # want that. $db_sock = ''; ]); LocalVar('db_check', q[ # # Should checksetup.pl try to verify that your database setup is correct? # (with some combinations of database servers/Perl modules/moonphase this # doesn't work) # $db_check = 1; ]); my @deprecatedvars; push(@deprecatedvars, '@severities') if (LocalVarExists('severities')); push(@deprecatedvars, '@priorities') if (LocalVarExists('priorities')); push(@deprecatedvars, '@opsys') if (LocalVarExists('opsys')); push(@deprecatedvars, '@platforms') if (LocalVarExists('platforms')); if (@deprecatedvars) { print "\nThe following settings in your localconfig file", " are no longer used:\n " . join(", ", @deprecatedvars) . "\nThis data is now controlled through the Bugzilla", " administrative interface.\nWe recommend you remove these", " settings from localconfig after checksetup\nruns successfully.\n"; } if (LocalVarExists('mysqlpath')) { print "\nThe \$mysqlpath setting in your localconfig file ", "is no longer required.\nWe recommend you remove it.\n"; } if ($newstuff ne "") { print "\nThis version of Bugzilla contains some variables that you may \n", "want to change and adapt to your local settings. Please edit the\n", "file '$localconfig' and rerun checksetup.pl\n\n", "The following variables are new to localconfig since you last ran\n", "checksetup.pl: $newstuff\n\n"; exit; } # 2000-Dec-18 - justdave@syndicomm.com - see Bug 52921 # This is a hack to read in the values defined in localconfig without getting # them defined at compile time if they're missing from localconfig. # Ideas swiped from pp. 281-282, O'Reilly's "Programming Perl 2nd Edition" # Note that we won't need to do this in globals.pl because globals.pl couldn't # care less whether they were defined ahead of time or not. my $my_db_check = ${*{$main::{'db_check'}}{SCALAR}}; my $my_db_driver = ${*{$main::{'db_driver'}}{SCALAR}}; my $my_db_name = ${*{$main::{'db_name'}}{SCALAR}}; my $my_index_html = ${*{$main::{'index_html'}}{SCALAR}}; my $my_create_htaccess = ${*{$main::{'create_htaccess'}}{SCALAR}}; my $my_webservergroup = ${*{$main::{'webservergroup'}}{SCALAR}}; # mkanat@bugzilla.org - bug 17453 # The following values have been removed from localconfig. # However, if we are upgrading from a Bugzilla with enums to a # Bugzilla without enums, we use these values one more time so # that we correctly populate the tables. my @my_severities; @my_severities = @{*{$main::{'severities'}}{ARRAY}} if exists($main::{'severities'}); my @my_priorities; @my_priorities = @{*{$main::{'priorities'}}{ARRAY}} if exists($main::{'priorities'}); my @my_platforms; @my_platforms = @{*{$main::{'platforms'}}{ARRAY}} if exists($main::{'platforms'}); my @my_opsys; @my_opsys = @{*{$main::{'opsys'}}{ARRAY}} if exists($main::{'opsys'}); if ($my_webservergroup && !$silent) { if ($^O !~ /MSWin32/i) { # if on unix, see if we need to print a warning about a webservergroup # that we can't chgrp to my $webservergid = (getgrnam($my_webservergroup))[2] or die("no such group: $my_webservergroup"); if ($< != 0 && !grep($_ eq $webservergid, split(" ", $)))) { print <>', "$datadir/nomail"; close FILE; open FILE, '>>', "$datadir/mail"; close FILE; } unless (-d $attachdir) { print "Creating local attachments directory ...\n"; # permissions for non-webservergroup are fixed later on mkdir $attachdir, 0770; } # 2000-12-14 New graphing system requires a directory to put the graphs in # This code copied from what happens for the data dir above. # If the graphs dir is not present, we assume that they have been using # a Bugzilla with the old data format, and upgrade their data files. # NB - the graphs dir isn't movable yet, unlike the datadir unless (-d 'graphs') { print "Creating graphs directory...\n"; # permissions for non-webservergroup are fixed later on mkdir 'graphs', 0770; # Upgrade data format foreach my $in_file (glob("$datadir/mining/*")) { # Don't try and upgrade image or db files! if (($in_file =~ /\.gif$/i) || ($in_file =~ /\.png$/i) || ($in_file =~ /\.db$/i) || ($in_file =~ /\.orig$/i)) { next; } rename("$in_file", "$in_file.orig") or next; open(IN, "$in_file.orig") or next; open(OUT, '>', $in_file) or next; # Fields in the header my @declared_fields = (); # Fields we changed to half way through by mistake # This list comes from an old version of collectstats.pl # This part is only for people who ran later versions of 2.11 (devel) my @intermediate_fields = qw(DATE UNCONFIRMED NEW ASSIGNED REOPENED RESOLVED VERIFIED CLOSED); # Fields we actually want (matches the current collectstats.pl) my @out_fields = qw(DATE NEW ASSIGNED REOPENED UNCONFIRMED RESOLVED VERIFIED CLOSED FIXED INVALID WONTFIX LATER REMIND DUPLICATE WORKSFORME MOVED); while () { if (/^# fields?: (.*)\s$/) { @declared_fields = map uc, (split /\||\r/, $1); print OUT "# fields: ", join('|', @out_fields), "\n"; } elsif (/^(\d+\|.*)/) { my @data = split /\||\r/, $1; my %data = (); if (@data == @declared_fields) { # old format for my $i (0 .. $#declared_fields) { $data{$declared_fields[$i]} = $data[$i]; } } elsif (@data == @intermediate_fields) { # Must have changed over at this point for my $i (0 .. $#intermediate_fields) { $data{$intermediate_fields[$i]} = $data[$i]; } } elsif (@data == @out_fields) { # This line's fine - it has the right number of entries for my $i (0 .. $#out_fields) { $data{$out_fields[$i]} = $data[$i]; } } else { print "Oh dear, input line $. of $in_file had " . scalar(@data) . " fields\n"; print "This was unexpected. You may want to check your data files.\n"; } print OUT join('|', map { defined ($data{$_}) ? ($data{$_}) : "" } @out_fields), "\n"; } else { print OUT; } } close(IN); close(OUT); } } unless (-d "$datadir/mining") { mkdir "$datadir/mining", 0700; } unless (-d "$webdotdir") { # perms/ownership are fixed up later mkdir "$webdotdir", 0700; } if (!-d "skins/custom") { # perms/ownership are fixed up later mkdir "skins/custom", 0700; } if (!-e "skins/.cvsignore") { open CVSIGNORE, '>>', "skins/.cvsignore"; print CVSIGNORE ".cvsignore\n"; print CVSIGNORE "custom\n"; close CVSIGNORE; } # Create custom stylesheets for each standard stylesheet. foreach my $standard () { my $custom = $standard; $custom =~ s|^skins/standard|skins/custom|; if (!-e $custom) { open STYLESHEET, '>', $custom; print STYLESHEET <<"END"; /* * Custom rules for $standard. * The rules you put here override rules in that stylesheet. */ END close STYLESHEET; } } if ($my_create_htaccess) { my $fileperm = 0644; my $dirperm = 01777; if ($my_webservergroup) { $fileperm = 0640; $dirperm = 0770; } if (!-e ".htaccess") { print "Creating .htaccess...\n"; open HTACCESS, '>', '.htaccess'; print HTACCESS <<'END'; # don't allow people to retrieve non-cgi executable files or our private data deny from all END close HTACCESS; chmod $fileperm, ".htaccess"; } else { # 2002-12-21 Bug 186383 open HTACCESS, ".htaccess"; my $oldaccess = ""; while () { $oldaccess .= $_; } close HTACCESS; if ($oldaccess =~ s/\|localconfig\|/\|.*localconfig.*\|/) { print "Repairing .htaccess...\n"; open HTACCESS, '>', '.htaccess'; print HTACCESS $oldaccess; close HTACCESS; } } if (!-e "$attachdir/.htaccess") { print "Creating $attachdir/.htaccess...\n"; open HTACCESS, ">$attachdir/.htaccess"; print HTACCESS <<'END'; # nothing in this directory is retrievable unless overridden by an .htaccess # in a subdirectory; deny from all END close HTACCESS; chmod $fileperm, "$attachdir/.htaccess"; } if (!-e "Bugzilla/.htaccess") { print "Creating Bugzilla/.htaccess...\n"; open HTACCESS, '>', 'Bugzilla/.htaccess'; print HTACCESS <<'END'; # nothing in this directory is retrievable unless overridden by an .htaccess # in a subdirectory deny from all END close HTACCESS; chmod $fileperm, "Bugzilla/.htaccess"; } # Even though $datadir may not (and should not) be in the webtree, # we can't know for sure, so create the .htaccess anyeay. Its harmless # if its not accessible... if (!-e "$datadir/.htaccess") { print "Creating $datadir/.htaccess...\n"; open HTACCESS, '>', "$datadir/.htaccess"; print HTACCESS <<'END'; # nothing in this directory is retrievable unless overriden by an .htaccess # in a subdirectory; the only exception is duplicates.rdf, which is used by # duplicates.xul and must be loadable over the web deny from all allow from all END close HTACCESS; chmod $fileperm, "$datadir/.htaccess"; } # Ditto for the template dir if (!-e "$templatedir/.htaccess") { print "Creating $templatedir/.htaccess...\n"; open HTACCESS, '>', "$templatedir/.htaccess"; print HTACCESS <<'END'; # nothing in this directory is retrievable unless overriden by an .htaccess # in a subdirectory deny from all END close HTACCESS; chmod $fileperm, "$templatedir/.htaccess"; } if (!-e "$webdotdir/.htaccess") { print "Creating $webdotdir/.htaccess...\n"; open HTACCESS, '>', "$webdotdir/.htaccess"; print HTACCESS <<'END'; # Restrict access to .dot files to the public webdot server at research.att.com # if research.att.com ever changes their IP, or if you use a different # webdot server, you'll need to edit this Allow from 192.20.225.10 Deny from all # Allow access to .png files created by a local copy of 'dot' Allow from all # And no directory listings, either. Deny from all END close HTACCESS; chmod $fileperm, "$webdotdir/.htaccess"; } } if ($my_index_html) { if (!-e "index.html") { print "Creating index.html...\n"; open HTML, '>', 'index.html'; print HTML <<'END';

I think you are looking for index.cgi

END close HTML; } else { open HTML, "index.html"; if (! grep /index\.cgi/, ) { print "\n\n"; print "*** It appears that you still have an old index.html hanging\n"; print " around. The contents of this file should be moved into a\n"; print " template and placed in the 'en/custom' directory within"; print " your template directory.\n\n"; } close HTML; } } # Just to be sure ... unlink "$datadir/versioncache"; # Check for a new install my $newinstall = !-e "$datadir/params"; # Remove parameters from the params file that no longer exist in Bugzilla, # and set the defaults for new ones my @oldparams = UpdateParams(); if (@oldparams) { open(PARAMFILE, '>>', 'old-params.txt') || die "$0: Can't open old-params.txt for writing: $!\n"; print "The following parameters are no longer used in Bugzilla, " . "and so have been\nmoved from your parameters file " . "into old-params.txt:\n"; foreach my $p (@oldparams) { my ($item, $value) = @{$p}; print PARAMFILE "\n\n$item:\n$value\n"; print $item; print ", " unless $item eq $oldparams[$#oldparams]->[0]; } print "\n"; close PARAMFILE; } # Set mail_delivery_method to SMTP and prompt for SMTP server # if running on Windows and no third party sendmail wrapper # is available if ($^O =~ /MSWin32/i && Param('mail_delivery_method') eq 'sendmail' && !-e SENDMAIL_EXE) { print "\nBugzilla requires an SMTP server to function on Windows.\n" . "Please enter your SMTP server's hostname: "; my $smtp = $answer{'SMTP_SERVER'} || ($silent && die("cant preload SMTP_SERVER")) || ; chomp $smtp; if (!$smtp) { print "\nWarning: No SMTP Server provided, defaulting to localhost\n"; $smtp = 'localhost'; } SetParam('mail_delivery_method', 'smtp'); SetParam('smtpserver', $smtp); } # Enable UTF-8 on new installs if ($newinstall) { SetParam('utf8', 1); } # WriteParams will only write out still-valid entries WriteParams(); unless ($switch{'no_templates'}) { if (-e "$datadir/template") { print "Removing existing compiled templates ...\n" unless $silent; File::Path::rmtree("$datadir/template"); #Check that the directory was really removed if(-e "$datadir/template") { print "\n\n"; print "The directory '$datadir/template' could not be removed.\n"; print "Please remove it manually and rerun checksetup.pl.\n\n"; exit; } } # Search for template directories # We include the default and custom directories separately to make # sure we compile all templates my @templatepaths = (); { use File::Spec; opendir(DIR, $templatedir) || die "Can't open '$templatedir': $!"; my @files = grep { /^[a-z-]+$/i } readdir(DIR); closedir DIR; foreach my $dir (@files) { next if($dir =~ /^CVS$/i); my $path = File::Spec->catdir($templatedir, $dir, 'custom'); push(@templatepaths, $path) if(-d $path); $path = File::Spec->catdir($templatedir, $dir, 'extension'); push(@templatepaths, $path) if(-d $path); $path = File::Spec->catdir($templatedir, $dir, 'default'); push(@templatepaths, $path) if(-d $path); } } # Precompile stuff. This speeds up initial access (so the template isn't # compiled multiple times simultaneously by different servers), and helps # to get the permissions right. sub compile { my $name = $File::Find::name; return if (-d $name); return if ($name =~ /\/CVS\//); return if ($name !~ /\.tmpl$/); $name =~ s/\Q$::templatepath\E\///; # trim the bit we don't pass to TT # Compile the template but throw away the result. This has the side- # effect of writing the compiled version to disk. $::template->context()->template($name); } eval("use Template"); { print "Precompiling templates ...\n" unless $silent; use File::Find; require Bugzilla::Template; # Don't hang on templates which use the CGI library eval("use CGI qw(-no_debug)"); $::template = Bugzilla::Template->create(); foreach $::templatepath (@templatepaths) { # Traverse the template hierarchy. find({ wanted => \&compile, no_chdir => 1 }, $::templatepath); } } } ########################################################################### # Set proper rights ########################################################################### # # Here we use --CHMOD-- and friends to set the file permissions # # The rationale is that the web server generally runs as apache, so the cgi # scripts should not be writable for apache, otherwise someone may be possible # to change the cgi's when exploiting some security flaw somewhere (not # necessarily in Bugzilla!) # # Also, some *.pl files are executable, some are not. # # +++ Can anybody tell me what a Windows Perl would do with this code? # # Changes 03/14/00 by SML # # This abstracts out what files are executable and what ones are not. It makes # for slightly neater code and lets us do things like determine exactly which # files are executable and which ones are not. # # Not all directories have permissions changed on them. i.e., changing ./CVS # to be 0640 is bad. # # Fixed bug in chmod invocation. chmod (at least on my linux box running perl # 5.005 needs a valid first argument, not 0. # # (end changes, 03/14/00 by SML) # # Changes 15/06/01 kiko@async.com.br # # Fix file permissions for non-webservergroup installations (see # http://bugzilla.mozilla.org/show_bug.cgi?id=71555). I'm setting things # by default to world readable/executable for all files, and # world-writable (with sticky on) to data and graphs. # # These are the files which need to be marked executable my @executable_files = ('whineatnews.pl', 'collectstats.pl', 'checksetup.pl', 'importxml.pl', 'runtests.pl', 'testserver.pl', 'whine.pl'); # tell me if a file is executable. All CGI files and those in @executable_files # are executable sub isExecutableFile { my ($file) = @_; if ($file =~ /\.cgi/) { return 1; } my $exec_file; foreach $exec_file (@executable_files) { if ($file eq $exec_file) { return 1; } } return undef; } # fix file (or files - wildcards ok) permissions sub fixPerms { my ($file_pattern, $owner, $group, $umask, $do_dirs) = @_; my @files = glob($file_pattern); my $execperm = 0777 & ~ $umask; my $normperm = 0666 & ~ $umask; foreach my $file (@files) { next if (!-e $file); # do not change permissions on directories here unless $do_dirs is set if (!(-d $file)) { chown $owner, $group, $file; # check if the file is executable. if (isExecutableFile($file)) { #printf ("Changing $file to %o\n", $execperm); chmod $execperm, $file; } else { #printf ("Changing $file to %o\n", $normperm); chmod $normperm, $file; } } elsif ($do_dirs) { chown $owner, $group, $file; if ($file =~ /CVS$/) { chmod 0700, $file; } else { #printf ("Changing $file to %o\n", $execperm); chmod $execperm, $file; fixPerms("$file/.htaccess", $owner, $group, $umask, $do_dirs); # do the contents of the directory fixPerms("$file/*", $owner, $group, $umask, $do_dirs); } } } } if ($^O !~ /MSWin32/i) { if ($my_webservergroup) { # Funny! getgrname returns the GID if fed with NAME ... my $webservergid = getgrnam($my_webservergroup) or die("no such group: $my_webservergroup"); # chown needs to be called with a valid uid, not 0. $< returns the # caller's uid. Maybe there should be a $bugzillauid, and call # with that userid. fixPerms('.htaccess', $<, $webservergid, 027); # glob('*') doesn't catch dotfiles fixPerms("$datadir/.htaccess", $<, $webservergid, 027); fixPerms("$datadir/duplicates", $<, $webservergid, 027, 1); fixPerms("$datadir/mining", $<, $webservergid, 027, 1); fixPerms("$datadir/template", $<, $webservergid, 007, 1); # webserver will write to these fixPerms($attachdir, $<, $webservergid, 007, 1); # webserver will write to these fixPerms($webdotdir, $<, $webservergid, 007, 1); fixPerms("$webdotdir/.htaccess", $<, $webservergid, 027); fixPerms("$datadir/params", $<, $webservergid, 017); fixPerms('*', $<, $webservergid, 027); fixPerms('Bugzilla', $<, $webservergid, 027, 1); fixPerms($templatedir, $<, $webservergid, 027, 1); fixPerms('images', $<, $webservergid, 027, 1); fixPerms('css', $<, $webservergid, 027, 1); fixPerms('skins', $<, $webservergid, 027, 1); fixPerms('js', $<, $webservergid, 027, 1); chmod 0644, 'globals.pl'; # Don't use fixPerms here, because it won't change perms # on the directory unless it's using recursion chown $<, $webservergid, $datadir; chmod 0771, $datadir; chown $<, $webservergid, 'graphs'; chmod 0770, 'graphs'; } else { # get current gid from $( list my $gid = (split " ", $()[0]; fixPerms('.htaccess', $<, $gid, 022); # glob('*') doesn't catch dotfiles fixPerms("$datadir/.htaccess", $<, $gid, 022); fixPerms("$datadir/duplicates", $<, $gid, 022, 1); fixPerms("$datadir/mining", $<, $gid, 022, 1); fixPerms("$datadir/template", $<, $gid, 000, 1); # webserver will write to these fixPerms($webdotdir, $<, $gid, 000, 1); chmod 01777, $webdotdir; fixPerms("$webdotdir/.htaccess", $<, $gid, 022); fixPerms("$datadir/params", $<, $gid, 011); fixPerms('*', $<, $gid, 022); fixPerms('Bugzilla', $<, $gid, 022, 1); fixPerms($templatedir, $<, $gid, 022, 1); fixPerms('images', $<, $gid, 022, 1); fixPerms('css', $<, $gid, 022, 1); fixPerms('skins', $<, $gid, 022, 1); fixPerms('js', $<, $gid, 022, 1); # Don't use fixPerms here, because it won't change perms # on the directory unless it's using recursion chown $<, $gid, $datadir; chmod 0777, $datadir; chown $<, $gid, 'graphs'; chmod 01777, 'graphs'; } } ########################################################################### # Global Utility Library ########################################################################### # This is done here, because some modules require params to be set up, which # won't have happened earlier. # It's never safe to directly "use" a module in checksetup. If a module # prerequisite is missing, and you "use" a module that requires it, # then instead of our nice normal checksetup message the user would # get a cryptic perl error about the missing module. # So, we always wrap our "use" statements in checksetup in a string eval. # This is done so we can add new settings as developers need them. require Bugzilla::User::Setting; import Bugzilla::User::Setting qw(add_setting); eval("use Bugzilla:Util"); # globals.pl clears the PATH, but File::Find uses Cwd::cwd() instead of # Cwd::getcwd(), which we need to do because `pwd` isn't in the path - see # http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/2001-09/msg00115.html # As a workaround, since we only use File::Find in checksetup, which doesn't # run in taint mode anyway, preserve the path... my $origPath = $::ENV{'PATH'}; # Use the Bugzilla utility library for various functions. We do this # here rather than at the top of the file so globals.pl doesn't define # localconfig variables for us before we get a chance to check for # their existence and create them if they don't exist. Also, globals.pl # removes $ENV{'path'}, which we need in order to run `which mysql` above. require "globals.pl"; # ...and restore it. This doesn't change tainting, so this will still cause # errors if this script ever does run with -T. $::ENV{'PATH'} = $origPath; ########################################################################### # Check Database setup ########################################################################### # # Check if we have access to the --DATABASE-- # # No need to "use" this here. It should already be loaded from the # version-checking routines above, and this file won't even compile if # DBI isn't installed so the user gets nasty errors instead of our # pretty one saying they need to install it. -- justdave@syndicomm.com #use DBI; if ($my_db_check) { # Do we have the database itself? # Unfortunately, $my_db_driver doesn't map perfectly between DBD # and Bugzilla::DB. We need to fix the case a bit. (my $dbd_name = trim($my_db_driver)) =~ s/(\w+)/\u\L$1/g; # And MySQL is special, because it's all lowercase in DBD. $dbd_name = 'mysql' if $dbd_name eq 'Mysql'; my $dbd = "DBD::$dbd_name"; unless (eval("require $dbd")) { print "Bugzilla requires that perl's $dbd be installed.\n" . "To install this module, you can do:\n " . " " . install_command($dbd) . "\n"; exit; } my $dbh = Bugzilla::DB::connect_main("no database connection"); my $sql_want = $dbh->REQUIRED_VERSION; my $sql_server = $dbh->PROGRAM_NAME; my $dbd_ver = $dbh->DBD_VERSION; unless (have_vers($dbd, $dbd_ver)) { die "Bugzilla requires at least version $dbd_ver of $dbd."; } printf("Checking for %15s %-9s ", $sql_server, "(v$sql_want)") unless $silent; my $sql_vers = $dbh->bz_server_version; # Check what version of the database server is installed and let # the user know if the version is too old to be used with Bugzilla. if ( vers_cmp($sql_vers,$sql_want) > -1 ) { print "ok: found v$sql_vers\n" unless $silent; } else { die "\nYour $sql_server v$sql_vers is too old.\n" . " Bugzilla requires version $sql_want or later of $sql_server.\n" . " Please download and install a newer version.\n"; } # See if we can connect to the database. my $conn_success = eval { my $check_dbh = Bugzilla::DB::connect_main(); $check_dbh->disconnect; }; if (!$conn_success) { print "Creating database $my_db_name ...\n"; # Try to create the DB, and if we fail print an error. if (!eval { $dbh->do("CREATE DATABASE $my_db_name") }) { my $error = $dbh->errstr; die <<"EOF" The '$my_db_name' database could not be created. The error returned was: $error This might have several reasons: * $sql_server is not running. * $sql_server is running, but there is a problem either in the server configuration or the database access rights. Read the Bugzilla Guide in the doc directory. The section about database configuration should help. * There is a subtle problem with Perl, DBI, or $sql_server. Make sure all settings in '$localconfig' are correct. If all else fails, set '\$db_check' to zero.\n EOF } } $dbh->disconnect if $dbh; } # now get a handle to the database: my $dbh = Bugzilla::DB::connect_main(); END { $dbh->disconnect if $dbh } ########################################################################### # Check for LDAP ########################################################################### for my $verifymethod (split /,\s*/, Param('user_verify_class')) { if ($verifymethod eq 'LDAP') { my $netLDAP = have_vers("Net::LDAP", 0); if (!$netLDAP && !$silent) { print "If you wish to use LDAP authentication, then you must install Net::LDAP\n\n"; } } } ########################################################################### # Check GraphViz setup ########################################################################### # # If we are using a local 'dot' binary, verify the specified binary exists # and that the generated images are accessible. # if( Param('webdotbase') && Param('webdotbase') !~ /^https?:/ ) { printf("Checking for %15s %-9s ", "GraphViz", "(any)") unless $silent; if(-x Param('webdotbase')) { print "ok: found\n" unless $silent; } else { print "not a valid executable: " . Param('webdotbase') . "\n"; } # Check .htaccess allows access to generated images if(-e "$webdotdir/.htaccess") { open HTACCESS, "$webdotdir/.htaccess"; if(! grep(/png/,)) { print "Dependency graph images are not accessible.\n"; print "delete $webdotdir/.htaccess and re-run checksetup.pl to fix.\n"; } close HTACCESS; } } print "\n" unless $silent; ########################################################################### # Create tables ########################################################################### # Note: --TABLE-- definitions are now in Bugzilla::DB::Schema. $dbh->bz_setup_database(); ########################################################################### # Populate groups table ########################################################################### sub GroupDoesExist { my ($name) = @_; my $sth = $dbh->prepare("SELECT name FROM groups WHERE name='$name'"); $sth->execute; if ($sth->rows) { return 1; } return 0; } # # This subroutine ensures that a group exists. If not, it will be created # automatically, and given the next available groupid # sub AddGroup { my ($name, $desc, $userregexp) = @_; $userregexp ||= ""; return if GroupDoesExist($name); print "Adding group $name ...\n"; my $sth = $dbh->prepare('INSERT INTO groups (name, description, userregexp, isbuggroup, last_changed) VALUES (?, ?, ?, ?, NOW())'); $sth->execute($name, $desc, $userregexp, 0); my $last = $dbh->bz_last_key('groups', 'id'); return $last; } ########################################################################### # Populate the list of fields. ########################################################################### my $headernum = 1; sub AddFDef { my ($name, $description, $mailhead) = (@_); my $sth = $dbh->prepare("SELECT fieldid FROM fielddefs " . "WHERE name = ?"); $sth->execute($name); my ($fieldid) = ($sth->fetchrow_array()); if (!$fieldid) { $dbh->do(q{INSERT INTO fielddefs (name, description, mailhead, sortkey) VALUES (?, ?, ?, ?)}, undef, ($name, $description, $mailhead, $headernum)); } else { $dbh->do(q{UPDATE fielddefs SET name = ?, description = ?, mailhead = ?, sortkey = ? WHERE fieldid = ?}, undef, $name, $description, $mailhead, $headernum, $fieldid); } $headernum++; } # Note that all of these entries are unconditional, from when GetFieldID # used to create an entry if it wasn't found. New fielddef columns should # be created with their associated schema change. AddFDef("bug_id", "Bug \#", 1); AddFDef("short_desc", "Summary", 1); AddFDef("classification", "Classification", 1); AddFDef("product", "Product", 1); AddFDef("version", "Version", 1); AddFDef("rep_platform", "Platform", 1); AddFDef("bug_file_loc", "URL", 1); AddFDef("op_sys", "OS/Version", 1); AddFDef("bug_status", "Status", 1); AddFDef("status_whiteboard", "Status Whiteboard", 0); AddFDef("keywords", "Keywords", 1); AddFDef("resolution", "Resolution", 0); AddFDef("bug_severity", "Severity", 1); AddFDef("priority", "Priority", 1); AddFDef("component", "Component", 1); AddFDef("assigned_to", "AssignedTo", 1); AddFDef("reporter", "ReportedBy", 1); AddFDef("votes", "Votes", 0); AddFDef("qa_contact", "QAContact", 1); AddFDef("cc", "CC", 1); AddFDef("dependson", "BugsThisDependsOn", 1); AddFDef("blocked", "OtherBugsDependingOnThis", 1); AddFDef("attachments.description", "Attachment description", 0); AddFDef("attachments.thedata", "Attachment data", 0); AddFDef("attachments.filename", "Attachment filename", 0); AddFDef("attachments.mimetype", "Attachment mime type", 0); AddFDef("attachments.ispatch", "Attachment is patch", 0); AddFDef("attachments.isobsolete", "Attachment is obsolete", 0); AddFDef("attachments.isprivate", "Attachment is private", 0); AddFDef("target_milestone", "Target Milestone", 0); AddFDef("creation_ts", "Creation date", 0); AddFDef("delta_ts", "Last changed date", 0); AddFDef("(" . $dbh->sql_to_days('NOW()') . " - " . $dbh->sql_to_days('bugs.delta_ts') . ")", "Days since bug changed", 0); AddFDef("longdesc", "Comment", 0); AddFDef("alias", "Alias", 0); AddFDef("everconfirmed", "Ever Confirmed", 0); AddFDef("reporter_accessible", "Reporter Accessible", 0); AddFDef("cclist_accessible", "CC Accessible", 0); AddFDef("bug_group", "Group", 0); AddFDef("estimated_time", "Estimated Hours", 1); AddFDef("remaining_time", "Remaining Hours", 0); AddFDef("deadline", "Deadline", 1); AddFDef("commenter", "Commenter", 0); # Oops. Bug 163299 $dbh->do("DELETE FROM fielddefs WHERE name='cc_accessible'"); # Oops. Bug 215319 $dbh->do("DELETE FROM fielddefs WHERE name='requesters.login_name'"); AddFDef("flagtypes.name", "Flag", 0); AddFDef("requestees.login_name", "Flag Requestee", 0); AddFDef("setters.login_name", "Flag Setter", 0); AddFDef("work_time", "Hours Worked", 0); AddFDef("percentage_complete", "Percentage Complete", 0); AddFDef("content", "Content", 0); ########################################################################### # Detect changed local settings ########################################################################### # mkanat@bugzilla.org - bug 17453 # Create the values for the tables that hold what used to be enum types. # Don't populate the tables if the table isn't empty. sub PopulateEnumTable { my ($table, @valuelist) = @_; # If we encounter any of the keys in this hash, they are # automatically set to isactive=0 my %defaultinactive = ('---' => 1); # Check if there are any table entries my $query = "SELECT COUNT(id) FROM $table"; my $sth = $dbh->prepare($query); $sth->execute(); # If the table is empty... if ( !$sth->fetchrow_array() ) { my $insert = $dbh->prepare("INSERT INTO $table" . " (value,sortkey,isactive) VALUES (?,?,?)"); my $sortorder = 0; foreach my $value (@valuelist) { $sortorder = $sortorder + 100; # Not active if the value exists in $defaultinactive my $isactive = exists($defaultinactive{$value}) ? 0 : 1; print "Inserting value '$value' in table $table" . " with sortkey $sortorder...\n"; $insert->execute($value, $sortorder, $isactive); } } } # mkanat@bugzilla.org - bug 17453 # Set default values for what used to be the enum types. # These values are no longer stored in localconfig. # However, if we are upgrading from a Bugzilla with enums to a # Bugzilla without enums, we use the localconfig values one more time. # The values that you see here are ONLY DEFAULTS. They are only used # the FIRST time you run checksetup. After that, they are either # controlled through the Bugzilla UI or through the DB. @my_severities = ('blocker','critical','major','normal','minor', 'trivial','enhancement') if !@my_severities; @my_priorities = ("P1","P2","P3","P4","P5") if !@my_priorities; @my_opsys = ("All","Windows","Mac OS","Linux","Other") if !@my_opsys; @my_platforms = ("All","PC","Macintosh","Other") if !@my_platforms; PopulateEnumTable('bug_severity', @my_severities); PopulateEnumTable('priority', @my_priorities); PopulateEnumTable('op_sys', @my_opsys); PopulateEnumTable('rep_platform', @my_platforms); # The resolution and bug_status lists are absolute. On an upgrade from # a Bugzilla with enums, whatever is in the enum will be replaced with # this. This is because Bugzilla depends on the exact names of these # resolutions in order to function properly. my @states = ("UNCONFIRMED","NEW","ASSIGNED","REOPENED","RESOLVED", "VERIFIED","CLOSED"); my @resolutions = ("","FIXED","INVALID","WONTFIX","LATER","REMIND", "DUPLICATE","WORKSFORME","MOVED"); PopulateEnumTable('bug_status', @states); PopulateEnumTable('resolution', @resolutions); ########################################################################### # Create initial test product if there are no products present. ########################################################################### my $sth = $dbh->prepare("SELECT description FROM products"); $sth->execute; unless ($sth->rows) { print "Creating initial dummy product 'TestProduct' ...\n"; my $test_product_name = 'TestProduct'; my $test_product_desc = 'This is a test product. This ought to be blown away and' . ' replaced with real stuff in a finished installation of bugzilla.'; my $test_product_version = 'other'; $dbh->do(q{INSERT INTO products(name, description, milestoneurl, disallownew, votesperuser, votestoconfirm) VALUES (?, ?, '', ?, ?, ?)}, undef, $test_product_name, $test_product_desc, 0, 0, 0); # We could probably just assume that this is "1", but better # safe than sorry... my $product_id = $dbh->bz_last_key('products', 'id'); $dbh->do(q{INSERT INTO versions (value, product_id) VALUES (?, ?)}, undef, $test_product_version, $product_id); # note: since admin user is not yet known, components gets a 0 for # initialowner and this is fixed during final checks. $dbh->do("INSERT INTO components (name, product_id, description, " . "initialowner) " . "VALUES (" . "'TestComponent', $product_id, " . "'This is a test component in the test product database. " . "This ought to be blown away and replaced with real stuff in " . "a finished installation of Bugzilla.', 0)"); $dbh->do(q{INSERT INTO milestones (product_id, value, sortkey) VALUES (?,?,?)}, undef, $product_id, '---', 0); } # Create a default classification if one does not exist my $class_count = $dbh->selectrow_array("SELECT COUNT(*) FROM classifications"); if (!$class_count) { $dbh->do("INSERT INTO classifications (name,description) " . "VALUES('Unclassified','Unassigned to any classifications')"); } ########################################################################### # Update the tables to the current definition ########################################################################### # Both legacy code and modern code need this variable. my @admins = (); # really old fields that were added before checksetup.pl existed # but aren't in very old bugzilla's (like 2.1) # Steve Stock (sstock@iconnect-inc.com) $dbh->bz_add_column('bugs', 'target_milestone', {TYPE => 'varchar(20)', NOTNULL => 1, DEFAULT => "'---'"}); $dbh->bz_add_column('bugs', 'qa_contact', {TYPE => 'INT3'}); $dbh->bz_add_column('bugs', 'status_whiteboard', {TYPE => 'MEDIUMTEXT', NOTNULL => 1, DEFAULT => "''"}); $dbh->bz_add_column('products', 'disallownew', {TYPE => 'BOOLEAN', NOTNULL => 1}, 0); $dbh->bz_add_column('products', 'milestoneurl', {TYPE => 'TINYTEXT', NOTNULL => 1}, ''); $dbh->bz_add_column('components', 'initialqacontact', {TYPE => 'TINYTEXT'}); $dbh->bz_add_column('components', 'description', {TYPE => 'MEDIUMTEXT', NOTNULL => 1}, ''); # 1999-06-22 Added an entry to the attachments table to record who the # submitter was. Nothing uses this yet, but it still should be recorded. $dbh->bz_add_column('attachments', 'submitter_id', {TYPE => 'INT3', NOTNULL => 1}, 0); # # One could even populate this field automatically, e.g. with # # unless (GetField('attachments', 'submitter_id') { # $dbh->bz_add_column ... # populate # } # # For now I was too lazy, so you should read the documentation :-) # 1999-9-15 Apparently, newer alphas of MySQL won't allow you to have "when" # as a column name. So, I have had to rename a column in the bugs_activity # table. $dbh->bz_rename_column('bugs_activity', 'when', 'bug_when'); # 1999-10-11 Restructured voting database to add a cached value in each bug # recording how many total votes that bug has. While I'm at it, I removed # the unused "area" field from the bugs database. It is distressing to # realize that the bugs table has reached the maximum number of indices # allowed by MySQL (16), which may make future enhancements awkward. # (P.S. All is not lost; it appears that the latest betas of MySQL support # a new table format which will allow 32 indices.) $dbh->bz_drop_column('bugs', 'area'); if (!$dbh->bz_column_info('bugs', 'votes')) { $dbh->bz_add_column('bugs', 'votes', {TYPE => 'INT3', NOTNULL => 1, DEFAULT => 0}); $dbh->bz_add_index('bugs', 'bugs_votes_idx', [qw(votes)]); } $dbh->bz_add_column('products', 'votesperuser', {TYPE => 'INT2', NOTNULL => 1}, 0); # The product name used to be very different in various tables. # # It was varchar(16) in bugs # tinytext in components # tinytext in products # tinytext in versions # # tinytext is equivalent to varchar(255), which is quite huge, so I change # them all to varchar(64). # Only do this if these fields still exist - they're removed below, in # a later change if ($dbh->bz_column_info('products', 'product')) { $dbh->bz_alter_column('bugs', 'product', {TYPE => 'varchar(64)', NOTNULL => 1}); $dbh->bz_alter_column('components', 'program', {TYPE => 'varchar(64)'}); $dbh->bz_alter_column('products', 'product', {TYPE => 'varchar(64)'}); $dbh->bz_alter_column('versions', 'program', {TYPE => 'varchar(64)', NOTNULL => 1}); } # 2000-01-16 Added a "keywords" field to the bugs table, which # contains a string copy of the entries of the keywords table for this # bug. This is so that I can easily sort and display a keywords # column in bug lists. if (!$dbh->bz_column_info('bugs', 'keywords')) { $dbh->bz_add_column('bugs', 'keywords', {TYPE => 'MEDIUMTEXT', NOTNULL => 1, DEFAULT => "''"}); my @kwords; print "Making sure 'keywords' field of table 'bugs' is empty ...\n"; $dbh->do("UPDATE bugs SET keywords = '' " . "WHERE keywords != ''"); print "Repopulating 'keywords' field of table 'bugs' ...\n"; my $sth = $dbh->prepare("SELECT keywords.bug_id, keyworddefs.name " . "FROM keywords, keyworddefs " . "WHERE keyworddefs.id = keywords.keywordid " . "ORDER BY keywords.bug_id, keyworddefs.name"); $sth->execute; my @list; my $bugid = 0; my @row; while (1) { my ($b, $k) = ($sth->fetchrow_array()); if (!defined $b || $b ne $bugid) { if (@list) { $dbh->do("UPDATE bugs SET keywords = " . $dbh->quote(join(', ', @list)) . " WHERE bug_id = $bugid"); } if (!$b) { last; } $bugid = $b; @list = (); } push(@list, $k); } } # 2000-01-18 Added a "disabledtext" field to the profiles table. If not # empty, then this account has been disabled, and this field is to contain # text describing why. $dbh->bz_add_column('profiles', 'disabledtext', {TYPE => 'MEDIUMTEXT', NOTNULL => 1}, ''); # 2000-01-20 Added a new "longdescs" table, which is supposed to have all the # long descriptions in it, replacing the old long_desc field in the bugs # table. The below hideous code populates this new table with things from # the old field, with ugly parsing and heuristics. sub WriteOneDesc { my ($id, $who, $when, $buffer) = (@_); $buffer = trim($buffer); if ($buffer eq '') { return; } $dbh->do("INSERT INTO longdescs (bug_id, who, bug_when, thetext) VALUES " . "($id, $who, " . time2str("'%Y/%m/%d %H:%M:%S'", $when) . ", " . $dbh->quote($buffer) . ")"); } if ($dbh->bz_column_info('bugs', 'long_desc')) { eval("use Date::Parse"); eval("use Date::Format"); my $sth = $dbh->prepare("SELECT count(*) FROM bugs"); $sth->execute(); my ($total) = ($sth->fetchrow_array); print "Populating new long_desc table. This is slow. There are $total\n"; print "bugs to process; a line of dots will be printed for each 50.\n\n"; $| = 1; $dbh->bz_lock_tables('bugs write', 'longdescs write', 'profiles write', 'bz_schema WRITE'); $dbh->do('DELETE FROM longdescs'); $sth = $dbh->prepare("SELECT bug_id, creation_ts, reporter, long_desc " . "FROM bugs ORDER BY bug_id"); $sth->execute(); my $count = 0; while (1) { my ($id, $createtime, $reporterid, $desc) = ($sth->fetchrow_array()); if (!$id) { last; } print "."; $count++; if ($count % 10 == 0) { print " "; if ($count % 50 == 0) { print "$count/$total (" . int($count * 100 / $total) . "%)\n"; } } $desc =~ s/\r//g; my $who = $reporterid; my $when = str2time($createtime); my $buffer = ""; foreach my $line (split(/\n/, $desc)) { $line =~ s/\s+$//g; # Trim trailing whitespace. if ($line =~ /^------- Additional Comments From ([^\s]+)\s+(\d.+\d)\s+-------$/) { my $name = $1; my $date = str2time($2); $date += 59; # Oy, what a hack. The creation time is # accurate to the second. But we the long # text only contains things accurate to the # minute. And so, if someone makes a comment # within a minute of the original bug creation, # then the comment can come *before* the # bug creation. So, we add 59 seconds to # the time of all comments, so that they # are always considered to have happened at # the *end* of the given minute, not the # beginning. if ($date >= $when) { WriteOneDesc($id, $who, $when, $buffer); $buffer = ""; $when = $date; my $s2 = $dbh->prepare("SELECT userid FROM profiles " . "WHERE login_name = " . $dbh->quote($name)); $s2->execute(); ($who) = ($s2->fetchrow_array()); if (!$who) { # This username doesn't exist. Try a special # netscape-only hack (sorry about that, but I don't # think it will hurt any other installations). We # have many entries in the bugsystem from an ancient # world where the "@netscape.com" part of the loginname # was omitted. So, look up the user again with that # appended, and use it if it's there. if ($name !~ /\@/) { my $nsname = $name . "\@netscape.com"; $s2 = $dbh->prepare("SELECT userid FROM profiles " . "WHERE login_name = " . $dbh->quote($nsname)); $s2->execute(); ($who) = ($s2->fetchrow_array()); } } if (!$who) { # This username doesn't exist. Maybe someone renamed # him or something. Invent a new profile entry, # disabled, just to represent him. $dbh->do("INSERT INTO profiles " . "(login_name, cryptpassword," . " disabledtext) VALUES (" . $dbh->quote($name) . ", " . $dbh->quote(bz_crypt('okthen')) . ", " . "'Account created only to maintain database integrity')"); $who = $dbh->bz_last_key('profiles', 'userid'); } next; } else { # print "\nDecided this line of bug $id has a date of " . # time2str("'%Y/%m/%d %H:%M:%S'", $date) . # "\nwhich is less than previous line:\n$line\n\n"; } } $buffer .= $line . "\n"; } WriteOneDesc($id, $who, $when, $buffer); } print "\n\n"; $dbh->bz_drop_column('bugs', 'long_desc'); $dbh->bz_unlock_tables(); } # 2000-01-18 Added a new table fielddefs that records information about the # different fields we keep an activity log on. The bugs_activity table # now has a pointer into that table instead of recording the name directly. if ($dbh->bz_column_info('bugs_activity', 'field')) { $dbh->bz_add_column('bugs_activity', 'fieldid', {TYPE => 'INT3', NOTNULL => 1}, 0); $dbh->bz_add_index('bugs_activity', 'bugs_activity_fieldid_idx', [qw(fieldid)]); print "Populating new fieldid field ...\n"; $dbh->bz_lock_tables('bugs_activity WRITE', 'fielddefs WRITE'); my $sth = $dbh->prepare('SELECT DISTINCT field FROM bugs_activity'); $sth->execute(); my %ids; while (my ($f) = ($sth->fetchrow_array())) { my $q = $dbh->quote($f); my $s2 = $dbh->prepare("SELECT fieldid FROM fielddefs WHERE name = $q"); $s2->execute(); my ($id) = ($s2->fetchrow_array()); if (!$id) { $dbh->do("INSERT INTO fielddefs (name, description) VALUES " . "($q, $q)"); $id = $dbh->bz_last_key('fielddefs', 'fieldid'); } $dbh->do("UPDATE bugs_activity SET fieldid = $id WHERE field = $q"); } $dbh->bz_unlock_tables(); $dbh->bz_drop_column('bugs_activity', 'field'); } # 2000-01-18 New email-notification scheme uses a new field in the bug to # record when email notifications were last sent about this bug. Also, # added 'newemailtech' field to record if user wants to use the experimental # stuff. # 2001-04-29 jake@bugzilla.org - The newemailtech field is no longer needed # http://bugzilla.mozilla.org/show_bugs.cgi?id=71552 if (!$dbh->bz_column_info('bugs', 'lastdiffed')) { $dbh->bz_add_column('bugs', 'lastdiffed', {TYPE =>'DATETIME'}); $dbh->do('UPDATE bugs SET lastdiffed = now()'); } # 2000-01-22 The "login_name" field in the "profiles" table was not # declared to be unique. Sure enough, somehow, I got 22 duplicated entries # in my database. This code detects that, cleans up the duplicates, and # then tweaks the table to declare the field to be unique. What a pain. if (!$dbh->bz_index_info('profiles', 'profiles_login_name_idx')->{TYPE}) { print "Searching for duplicate entries in the profiles table ...\n"; while (1) { # This code is weird in that it loops around and keeps doing this # select again. That's because I'm paranoid about deleting entries # out from under us in the profiles table. Things get weird if # there are *three* or more entries for the same user... $sth = $dbh->prepare("SELECT p1.userid, p2.userid, p1.login_name " . "FROM profiles AS p1, profiles AS p2 " . "WHERE p1.userid < p2.userid " . "AND p1.login_name = p2.login_name " . "ORDER BY p1.login_name"); $sth->execute(); my ($u1, $u2, $n) = ($sth->fetchrow_array); if (!$u1) { last; } print "Both $u1 & $u2 are ids for $n! Merging $u2 into $u1 ...\n"; foreach my $i (["bugs", "reporter"], ["bugs", "assigned_to"], ["bugs", "qa_contact"], ["attachments", "submitter_id"], ["bugs_activity", "who"], ["cc", "who"], ["votes", "who"], ["longdescs", "who"]) { my ($table, $field) = (@$i); print " Updating $table.$field ...\n"; $dbh->do("UPDATE $table SET $field = $u1 " . "WHERE $field = $u2"); } $dbh->do("DELETE FROM profiles WHERE userid = $u2"); } print "OK, changing index type to prevent duplicates in the future ...\n"; $dbh->bz_drop_index('profiles', 'profiles_login_name_idx'); $dbh->bz_add_index('profiles', 'profiles_login_name_idx', {TYPE => 'UNIQUE', FIELDS => [qw(login_name)]}); } # 2000-01-24 Added a new field to let people control whether the "My # bugs" link appears at the bottom of each page. Also can control # whether each named query should show up there. $dbh->bz_add_column('profiles', 'mybugslink', {TYPE => 'BOOLEAN', NOTNULL => 1, DEFAULT => 'TRUE'}); $dbh->bz_add_column('namedqueries', 'linkinfooter', {TYPE => 'BOOLEAN', NOTNULL => 1}, 0); my $comp_init_owner = $dbh->bz_column_info('components', 'initialowner'); if ($comp_init_owner && $comp_init_owner->{TYPE} eq 'TINYTEXT') { $sth = $dbh->prepare( "SELECT program, value, initialowner, initialqacontact " . "FROM components"); $sth->execute(); while (my ($program, $value, $initialowner) = $sth->fetchrow_array()) { $initialowner =~ s/([\\\'])/\\$1/g; $initialowner =~ s/\0/\\0/g; $program =~ s/([\\\'])/\\$1/g; $program =~ s/\0/\\0/g; $value =~ s/([\\\'])/\\$1/g; $value =~ s/\0/\\0/g; my $s2 = $dbh->prepare("SELECT userid " . "FROM profiles " . "WHERE login_name = '$initialowner'"); $s2->execute(); my $initialownerid = $s2->fetchrow_array(); unless (defined $initialownerid) { print "Warning: You have an invalid default assignee '$initialowner'\n" . "in component '$value' of program '$program'. !\n"; $initialownerid = 0; } my $update = "UPDATE components " . "SET initialowner = $initialownerid " . "WHERE program = '$program' " . "AND value = '$value'"; my $s3 = $dbh->prepare("UPDATE components " . "SET initialowner = $initialownerid " . "WHERE program = '$program' " . "AND value = '$value';"); $s3->execute(); } $dbh->bz_alter_column('components','initialowner',{TYPE => 'INT3'}); } my $comp_init_qa = $dbh->bz_column_info('components', 'initialqacontact'); if ($comp_init_qa && $comp_init_qa->{TYPE} eq 'TINYTEXT') { $sth = $dbh->prepare( "SELECT program, value, initialqacontact, initialqacontact " . "FROM components"); $sth->execute(); while (my ($program, $value, $initialqacontact) = $sth->fetchrow_array()) { $initialqacontact =~ s/([\\\'])/\\$1/g; $initialqacontact =~ s/\0/\\0/g; $program =~ s/([\\\'])/\\$1/g; $program =~ s/\0/\\0/g; $value =~ s/([\\\'])/\\$1/g; $value =~ s/\0/\\0/g; my $s2 = $dbh->prepare("SELECT userid " . "FROM profiles " . "WHERE login_name = '$initialqacontact'"); $s2->execute(); my $initialqacontactid = $s2->fetchrow_array(); unless (defined $initialqacontactid) { if ($initialqacontact ne '') { print "Warning: You have an invalid default QA contact $initialqacontact' in program '$program', component '$value'!\n"; } $initialqacontactid = 0; } my $update = "UPDATE components " . "SET initialqacontact = $initialqacontactid " . "WHERE program = '$program' AND value = '$value'"; my $s3 = $dbh->prepare("UPDATE components " . "SET initialqacontact = $initialqacontactid " . "WHERE program = '$program' " . "AND value = '$value';"); $s3->execute(); } $dbh->bz_alter_column('components','initialqacontact',{TYPE => 'INT3'}); } if (!$dbh->bz_column_info('bugs', 'everconfirmed')) { $dbh->bz_add_column('bugs', 'everconfirmed', {TYPE => 'BOOLEAN', NOTNULL => 1}, 1); } $dbh->bz_add_column('products', 'maxvotesperbug', {TYPE => 'INT2', NOTNULL => 1, DEFAULT => '10000'}); $dbh->bz_add_column('products', 'votestoconfirm', {TYPE => 'INT2', NOTNULL => 1}, 0); # 2000-03-21 Adding a table for target milestones to # database - matthew@zeroknowledge.com # If the milestones table is empty, and we're still back in a Bugzilla # that has a bugs.product field, that means that we just created # the milestones table and it needs to be populated. my $milestones_exist = $dbh->selectrow_array("SELECT 1 FROM milestones"); if (!$milestones_exist && $dbh->bz_column_info('bugs', 'product')) { print "Replacing blank milestones...\n"; $dbh->do("UPDATE bugs " . "SET target_milestone = '---' " . "WHERE target_milestone = ' '"); # If we are upgrading from 2.8 or earlier, we will have *created* # the milestones table with a product_id field, but Bugzilla expects # it to have a "product" field. So we change the field backward so # other code can run. The change will be reversed later in checksetup. if ($dbh->bz_column_info('milestones', 'product_id')) { # Dropping the column leaves us with a milestones_product_id_idx # index that is only on the "value" column. We need to drop the # whole index so that it can be correctly re-created later. $dbh->bz_drop_index('milestones', 'milestones_product_id_idx'); $dbh->bz_drop_column('milestones', 'product_id'); $dbh->bz_add_column('milestones', 'product', {TYPE => 'varchar(64)', NOTNULL => 1}, ''); } # Populate the milestone table with all existing values in the database $sth = $dbh->prepare("SELECT DISTINCT target_milestone, product FROM bugs"); $sth->execute(); print "Populating milestones table...\n"; my $value; my $product; while(($value, $product) = $sth->fetchrow_array()) { # check if the value already exists my $sortkey = substr($value, 1); if ($sortkey !~ /^\d+$/) { $sortkey = 0; } else { $sortkey *= 10; } $value = $dbh->quote($value); $product = $dbh->quote($product); my $s2 = $dbh->prepare("SELECT value " . "FROM milestones " . "WHERE value = $value " . "AND product = $product"); $s2->execute(); if(!$s2->fetchrow_array()) { $dbh->do("INSERT INTO milestones(value, product, sortkey) VALUES($value, $product, $sortkey)"); } } } # 2000-03-22 Changed the default value for target_milestone to be "---" # (which is still not quite correct, but much better than what it was # doing), and made the size of the value field in the milestones table match # the size of the target_milestone field in the bugs table. $dbh->bz_alter_column('bugs', 'target_milestone', {TYPE => 'varchar(20)', NOTNULL => 1, DEFAULT => "'---'"}); $dbh->bz_alter_column('milestones', 'value', {TYPE => 'varchar(20)', NOTNULL => 1}); # 2000-03-23 Added a defaultmilestone field to the products table, so that # we know which milestone to initially assign bugs to. if (!$dbh->bz_column_info('products', 'defaultmilestone')) { $dbh->bz_add_column('products', 'defaultmilestone', {TYPE => 'varchar(20)', NOTNULL => 1, DEFAULT => "'---'"}); $sth = $dbh->prepare("SELECT product, defaultmilestone FROM products"); $sth->execute(); while (my ($product, $defaultmilestone) = $sth->fetchrow_array()) { $product = $dbh->quote($product); $defaultmilestone = $dbh->quote($defaultmilestone); my $s2 = $dbh->prepare("SELECT value FROM milestones " . "WHERE value = $defaultmilestone " . "AND product = $product"); $s2->execute(); if (!$s2->fetchrow_array()) { $dbh->do("INSERT INTO milestones(value, product) " . "VALUES ($defaultmilestone, $product)"); } } } # 2000-03-24 Added unique indexes into the cc and keyword tables. This # prevents certain database inconsistencies, and, moreover, is required for # new generalized list code to work. if (!$dbh->bz_index_info('cc', 'cc_bug_id_idx')->{TYPE}) { # XXX should eliminate duplicate entries before altering # $dbh->bz_drop_index('cc', 'cc_bug_id_idx'); $dbh->bz_add_index('cc', 'cc_bug_id_idx', {TYPE => 'UNIQUE', FIELDS => [qw(bug_id who)]}); } if (!$dbh->bz_index_info('keywords', 'keywords_bug_id_idx')->{TYPE}) { # XXX should eliminate duplicate entries before altering # $dbh->bz_drop_index('keywords', 'keywords_bug_id_idx'); $dbh->bz_add_index('keywords', 'keywords_bug_id_idx', {TYPE => 'UNIQUE', FIELDS => [qw(bug_id keywordid)]}); } # 2000-07-15 Added duplicates table so Bugzilla tracks duplicates in a better # way than it used to. This code searches the comments to populate the table # initially. It's executed if the table is empty; if it's empty because there # are no dupes (as opposed to having just created the table) it won't have # any effect anyway, so it doesn't matter. $sth = $dbh->prepare("SELECT count(*) from duplicates"); $sth->execute(); if (!($sth->fetchrow_arrayref()->[0])) { # populate table print("Populating duplicates table...\n") unless $silent; $sth = $dbh->prepare( "SELECT longdescs.bug_id, thetext " . "FROM longdescs " . "LEFT JOIN bugs using(bug_id) " . "WHERE (thetext " . $dbh->sql_regexp . " '[.*.]{3} This bug has been marked as a duplicate of [[:digit:]]+ [.*.]{3}') " . "AND (resolution = 'DUPLICATE') " . "ORDER BY longdescs.bug_when"); $sth->execute(); my %dupes; my $key; # Because of the way hashes work, this loop removes all but the last dupe # resolution found for a given bug. while (my ($dupe, $dupe_of) = $sth->fetchrow_array()) { $dupes{$dupe} = $dupe_of; } foreach $key (keys(%dupes)){ $dupes{$key} =~ /^.*\*\*\* This bug has been marked as a duplicate of (\d+) \*\*\*$/ms; $dupes{$key} = $1; $dbh->do("INSERT INTO duplicates VALUES('$dupes{$key}', '$key')"); # BugItsADupeOf Dupe } } # 2000-12-18. Added an 'emailflags' field for storing preferences about # when email gets sent on a per-user basis. if (!$dbh->bz_column_info('profiles', 'emailflags') && !$dbh->bz_column_info('email_setting', 'user_id')) { $dbh->bz_add_column('profiles', 'emailflags', {TYPE => 'MEDIUMTEXT'}); } # 2000-11-27 For Bugzilla 2.5 and later. Copy data from 'comments' to # 'longdescs' - the new name of the comments table. if ($dbh->bz_table_info('comments')) { my $quoted_when = $dbh->quote_identifier('when'); # This is MySQL-specific syntax, but that's OK because it will only # ever run on MySQL. $dbh->do("INSERT INTO longdescs (bug_when, bug_id, who, thetext) SELECT $quoted_when, bug_id, who, comment FROM comments"); $dbh->bz_drop_table("comments"); } # 2001-04-08 Added a special directory for the duplicates stats. unless (-d "$datadir/duplicates") { print "Creating duplicates directory...\n"; mkdir "$datadir/duplicates", 0770; if ($my_webservergroup eq "") { chmod 01777, "$datadir/duplicates"; } } # # 2001-04-10 myk@mozilla.org: # isactive determines whether or not a group is active. An inactive group # cannot have bugs added to it. Deactivation is a much milder form of # deleting a group that allows users to continue to work on bugs in the group # without enabling them to extend the life of the group by adding bugs to it. # http://bugzilla.mozilla.org/show_bug.cgi?id=75482 # $dbh->bz_add_column('groups', 'isactive', {TYPE => 'BOOLEAN', NOTNULL => 1, DEFAULT => 'TRUE'}); # # 2001-06-15 myk@mozilla.org: # isobsolete determines whether or not an attachment is pertinent/relevant/valid. # $dbh->bz_add_column('attachments', 'isobsolete', {TYPE => 'BOOLEAN', NOTNULL => 1, DEFAULT => 'FALSE'}); # 2001-04-29 jake@bugzilla.org - Remove oldemailtech # http://bugzilla.mozilla.org/show_bugs.cgi?id=71552 if (-d 'shadow') { print "Removing shadow directory...\n"; unlink glob("shadow/*"); unlink glob("shadow/.*"); rmdir "shadow"; } $dbh->bz_drop_column("profiles", "emailnotification"); $dbh->bz_drop_column("profiles", "newemailtech"); # 2003-11-19; chicks@chicks.net; bug 225973: fix field size to accomodate # wider algorithms such as Blowfish. Note that this needs to be run # before recrypting passwords in the following block. $dbh->bz_alter_column('profiles', 'cryptpassword', {TYPE => 'varchar(128)'}); # 2001-06-12; myk@mozilla.org; bugs 74032, 77473: # Recrypt passwords using Perl &crypt instead of the mysql equivalent # and delete plaintext passwords from the database. if ($dbh->bz_column_info('profiles', 'password')) { print <prepare("SELECT userid, password FROM profiles"); $sth->execute(); my $i = 1; print "Fixing password #1... "; while (my ($userid, $password) = $sth->fetchrow_array()) { my $cryptpassword = $dbh->quote(bz_crypt($password)); $dbh->do("UPDATE profiles " . "SET cryptpassword = $cryptpassword " . "WHERE userid = $userid"); ++$i; # Let the user know where we are at every 500 records. print "$i... " if !($i%500); } print "$i... Done.\n"; # Drop the plaintext password field. $dbh->bz_drop_column('profiles', 'password'); } # # 2001-06-06 justdave@syndicomm.com: # There was no index on the 'who' column in the long descriptions table. # This caused queries by who posted comments to take a LONG time. # http://bugzilla.mozilla.org/show_bug.cgi?id=57350 $dbh->bz_add_index('longdescs', 'longdescs_who_idx', [qw(who)]); # 2001-06-15 kiko@async.com.br - Change bug:version size to avoid # truncates re http://bugzilla.mozilla.org/show_bug.cgi?id=9352 $dbh->bz_alter_column('bugs', 'version', {TYPE => 'varchar(64)', NOTNULL => 1}); # 2001-07-20 jake@bugzilla.org - Change bugs_activity to only record changes # http://bugzilla.mozilla.org/show_bug.cgi?id=55161 if ($dbh->bz_column_info('bugs_activity', 'oldvalue')) { $dbh->bz_add_column("bugs_activity", "removed", {TYPE => "TINYTEXT"}); $dbh->bz_add_column("bugs_activity", "added", {TYPE => "TINYTEXT"}); # Need to get fieldid's for the fields that have multiple values my @multi = (); foreach my $f ("cc", "dependson", "blocked", "keywords") { my $sth = $dbh->prepare("SELECT fieldid " . "FROM fielddefs " . "WHERE name = '$f'"); $sth->execute(); my ($fid) = $sth->fetchrow_array(); push (@multi, $fid); } # Now we need to process the bugs_activity table and reformat the data my $i = 0; print "Fixing activity log "; my $sth = $dbh->prepare("SELECT bug_id, who, bug_when, fieldid, oldvalue, newvalue FROM bugs_activity"); $sth->execute; while (my ($bug_id, $who, $bug_when, $fieldid, $oldvalue, $newvalue) = $sth->fetchrow_array()) { # print the iteration count every 500 records # so the user knows we didn't die print "$i..." if !($i++ % 500); # Make sure (old|new)value isn't null (to suppress warnings) $oldvalue ||= ""; $newvalue ||= ""; my ($added, $removed) = ""; if (grep ($_ eq $fieldid, @multi)) { $oldvalue =~ s/[\s,]+/ /g; $newvalue =~ s/[\s,]+/ /g; my @old = split(" ", $oldvalue); my @new = split(" ", $newvalue); my (@add, @remove) = (); # Find values that were "added" foreach my $value(@new) { if (! grep ($_ eq $value, @old)) { push (@add, $value); } } # Find values that were removed foreach my $value(@old) { if (! grep ($_ eq $value, @new)) { push (@remove, $value); } } $added = join (", ", @add); $removed = join (", ", @remove); # If we can't determine what changed, put a ? in both fields unless ($added || $removed) { $added = "?"; $removed = "?"; } # If the original field (old|new)value was full, then this # could be incomplete data. if (length($oldvalue) == 255 || length($newvalue) == 255) { $added = "? $added"; $removed = "? $removed"; } } else { $removed = $oldvalue; $added = $newvalue; } $added = $dbh->quote($added); $removed = $dbh->quote($removed); $dbh->do("UPDATE bugs_activity SET removed = $removed, added = $added WHERE bug_id = $bug_id AND who = $who AND bug_when = '$bug_when' AND fieldid = $fieldid"); } print ". Done.\n"; $dbh->bz_drop_column("bugs_activity", "oldvalue"); $dbh->bz_drop_column("bugs_activity", "newvalue"); } $dbh->bz_alter_column("profiles", "disabledtext", {TYPE => 'MEDIUMTEXT', NOTNULL => 1}, ''); # 2001-07-26 myk@mozilla.org bug 39816 (original) # 2002-02-06 bbaetz@student.usyd.edu.au bug 97471 (revision) # Add fields to the bugs table that record whether or not the reporter # and users on the cc: list can see bugs even when # they are not members of groups to which the bugs are restricted. $dbh->bz_add_column("bugs", "reporter_accessible", {TYPE => 'BOOLEAN', NOTNULL => 1, DEFAULT => 'TRUE'}); $dbh->bz_add_column("bugs", "cclist_accessible", {TYPE => 'BOOLEAN', NOTNULL => 1, DEFAULT => 'TRUE'}); # 2001-08-21 myk@mozilla.org bug84338: # Add a field to the bugs_activity table for the attachment ID, so installations # using the attachment manager can record changes to attachments. $dbh->bz_add_column("bugs_activity", "attach_id", {TYPE => 'INT3'}); # 2002-02-04 bbaetz@student.usyd.edu.au bug 95732 # Remove logincookies.cryptpassword, and delete entries which become # invalid if ($dbh->bz_column_info("logincookies", "cryptpassword")) { # We need to delete any cookies which are invalid before dropping the # column print "Removing invalid login cookies...\n"; # mysql doesn't support DELETE with multi-table queries, so we have # to iterate my $sth = $dbh->prepare("SELECT cookie FROM logincookies, profiles " . "WHERE logincookies.cryptpassword != " . "profiles.cryptpassword AND " . "logincookies.userid = profiles.userid"); $sth->execute(); while (my ($cookie) = $sth->fetchrow_array()) { $dbh->do("DELETE FROM logincookies WHERE cookie = $cookie"); } $dbh->bz_drop_column("logincookies", "cryptpassword"); } # 2002-02-13 bbaetz@student.usyd.edu.au - bug 97471 # qacontact/assignee should always be able to see bugs, # so remove their restriction column if ($dbh->bz_column_info("bugs", "qacontact_accessible")) { print "Removing restrictions on bugs for assignee and qacontact...\n"; $dbh->bz_drop_column("bugs", "qacontact_accessible"); $dbh->bz_drop_column("bugs", "assignee_accessible"); } # 2002-02-20 jeff.hedlund@matrixsi.com - bug 24789 time tracking $dbh->bz_add_column("longdescs", "work_time", {TYPE => 'decimal(5,2)', NOTNULL => 1, DEFAULT => '0'}); $dbh->bz_add_column("bugs", "estimated_time", {TYPE => 'decimal(5,2)', NOTNULL => 1, DEFAULT => '0'}); $dbh->bz_add_column("bugs", "remaining_time", {TYPE => 'decimal(5,2)', NOTNULL => 1, DEFAULT => '0'}); $dbh->bz_add_column("bugs", "deadline", {TYPE => 'DATETIME'}); # 2002-03-15 bbaetz@student.usyd.edu.au - bug 129466 # 2002-05-13 preed@sigkill.com - bug 129446 patch backported to the # BUGZILLA-2_14_1-BRANCH as a security blocker for the 2.14.2 release # # Use the ip, not the hostname, in the logincookies table if ($dbh->bz_column_info("logincookies", "hostname")) { # We've changed what we match against, so all entries are now invalid $dbh->do("DELETE FROM logincookies"); # Now update the logincookies schema $dbh->bz_drop_column("logincookies", "hostname"); $dbh->bz_add_column("logincookies", "ipaddr", {TYPE => 'varchar(40)', NOTNULL => 1}, ''); } # 2002-08-19 - bugreport@peshkin.net bug 143826 # Add private comments and private attachments on less-private bugs $dbh->bz_add_column('longdescs', 'isprivate', {TYPE => 'BOOLEAN', NOTNULL => 1, DEFAULT => 'FALSE'}); $dbh->bz_add_column('attachments', 'isprivate', {TYPE => 'BOOLEAN', NOTNULL => 1, DEFAULT => 'FALSE'}); # 2002-07-03 myk@mozilla.org bug99203: # Add a bug alias field to the bugs table so bugs can be referenced by alias # in addition to ID. if (!$dbh->bz_column_info("bugs", "alias")) { $dbh->bz_add_column("bugs", "alias", {TYPE => "varchar(20)"}); $dbh->bz_add_index('bugs', 'bugs_alias_idx', {TYPE => 'UNIQUE', FIELDS => [qw(alias)]}); } # 2002-07-15 davef@tetsubo.com - bug 67950 # Move quips to the db. if (-r "$datadir/comments" && -s "$datadir/comments" && open (COMMENTS, "<$datadir/comments")) { print "Populating quips table from $datadir/comments...\n\n"; while () { chomp; $dbh->do("INSERT INTO quips (quip) VALUES (" . $dbh->quote($_) . ")"); } print "Quips are now stored in the database, rather than in an external file.\n" . "The quips previously stored in $datadir/comments have been copied into\n" . "the database, and that file has been renamed to $datadir/comments.bak\n" . "You may delete the renamed file once you have confirmed that all your \n" . "quips were moved successfully.\n\n"; close COMMENTS; rename("$datadir/comments", "$datadir/comments.bak"); } # 2002-07-31 bbaetz@student.usyd.edu.au bug 158236 # Remove unused column if ($dbh->bz_column_info("namedqueries", "watchfordiffs")) { $dbh->bz_drop_column("namedqueries", "watchfordiffs"); } # 2002-08-12 jake@bugzilla.org/bbaetz@student.usyd.edu.au - bug 43600 # Use integer IDs for products and components. if ($dbh->bz_column_info("products", "product")) { print "Updating database to use product IDs.\n"; # First, we need to remove possible NULL entries # NULLs may exist, but won't have been used, since all the uses of them # are in NOT NULL fields in other tables $dbh->do("DELETE FROM products WHERE product IS NULL"); $dbh->do("DELETE FROM components WHERE value IS NULL"); $dbh->bz_add_column("products", "id", {TYPE => 'SMALLSERIAL', NOTNULL => 1, PRIMARYKEY => 1}); $dbh->bz_add_column("components", "product_id", {TYPE => 'INT2', NOTNULL => 1}, 0); $dbh->bz_add_column("versions", "product_id", {TYPE => 'INT2', NOTNULL => 1}, 0); $dbh->bz_add_column("milestones", "product_id", {TYPE => 'INT2', NOTNULL => 1}, 0); $dbh->bz_add_column("bugs", "product_id", {TYPE => 'INT2', NOTNULL => 1}, 0); # The attachstatusdefs table was added in version 2.15, but removed again # in early 2.17. If it exists now, we still need to perform this change # with product_id because the code further down which converts the # attachment statuses to flags depends on it. But we need to avoid this # if the user is upgrading from 2.14 or earlier (because it won't be # there to convert). if ($dbh->bz_table_info("attachstatusdefs")) { $dbh->bz_add_column("attachstatusdefs", "product_id", {TYPE => 'INT2', NOTNULL => 1}, 0); } my %products; my $sth = $dbh->prepare("SELECT id, product FROM products"); $sth->execute; while (my ($product_id, $product) = $sth->fetchrow_array()) { if (exists $products{$product}) { print "Ignoring duplicate product $product\n"; $dbh->do("DELETE FROM products WHERE id = $product_id"); next; } $products{$product} = 1; $dbh->do("UPDATE components SET product_id = $product_id " . "WHERE program = " . $dbh->quote($product)); $dbh->do("UPDATE versions SET product_id = $product_id " . "WHERE program = " . $dbh->quote($product)); $dbh->do("UPDATE milestones SET product_id = $product_id " . "WHERE product = " . $dbh->quote($product)); $dbh->do("UPDATE bugs SET product_id = $product_id " . "WHERE product = " . $dbh->quote($product)); $dbh->do("UPDATE attachstatusdefs SET product_id = $product_id " . "WHERE product = " . $dbh->quote($product)) if $dbh->bz_table_info("attachstatusdefs"); } print "Updating the database to use component IDs.\n"; $dbh->bz_add_column("components", "id", {TYPE => 'SMALLSERIAL', NOTNULL => 1, PRIMARYKEY => 1}); $dbh->bz_add_column("bugs", "component_id", {TYPE => 'INT2', NOTNULL => 1}, 0); my %components; $sth = $dbh->prepare("SELECT id, value, product_id FROM components"); $sth->execute; while (my ($component_id, $component, $product_id) = $sth->fetchrow_array()) { if (exists $components{$component}) { if (exists $components{$component}{$product_id}) { print "Ignoring duplicate component $component for product $product_id\n"; $dbh->do("DELETE FROM components WHERE id = $component_id"); next; } } else { $components{$component} = {}; } $components{$component}{$product_id} = 1; $dbh->do("UPDATE bugs SET component_id = $component_id " . "WHERE component = " . $dbh->quote($component) . " AND product_id = $product_id"); } print "Fixing Indexes and Uniqueness.\n"; $dbh->bz_drop_index('milestones', 'milestones_product_idx'); $dbh->bz_add_index('milestones', 'milestones_product_id_idx', {TYPE => 'UNIQUE', FIELDS => [qw(product_id value)]}); $dbh->bz_drop_index('bugs', 'bugs_product_idx'); $dbh->bz_add_index('bugs', 'bugs_product_id_idx', [qw(product_id)]); $dbh->bz_drop_index('bugs', 'bugs_component_idx'); $dbh->bz_add_index('bugs', 'bugs_component_id_idx', [qw(component_id)]); print "Removing, renaming, and retyping old product and component fields.\n"; $dbh->bz_drop_column("components", "program"); $dbh->bz_drop_column("versions", "program"); $dbh->bz_drop_column("milestones", "product"); $dbh->bz_drop_column("bugs", "product"); $dbh->bz_drop_column("bugs", "component"); $dbh->bz_drop_column("attachstatusdefs", "product") if $dbh->bz_table_info("attachstatusdefs"); $dbh->bz_rename_column("products", "product", "name"); $dbh->bz_alter_column("products", "name", {TYPE => 'varchar(64)', NOTNULL => 1}); $dbh->bz_rename_column("components", "value", "name"); $dbh->bz_alter_column("components", "name", {TYPE => 'varchar(64)', NOTNULL => 1}); print "Adding indexes for products and components tables.\n"; $dbh->bz_add_index('products', 'products_name_idx', {TYPE => 'UNIQUE', FIELDS => [qw(name)]}); $dbh->bz_add_index('components', 'components_product_id_idx', {TYPE => 'UNIQUE', FIELDS => [qw(product_id name)]}); $dbh->bz_add_index('components', 'components_name_idx', [qw(name)]); } # 2002-09-22 - bugreport@peshkin.net - bug 157756 # # If the whole groups system is new, but the installation isn't, # convert all the old groupset groups, etc... # # This requires: # 1) define groups ids in group table # 2) populate user_group_map with grants from old groupsets and blessgroupsets # 3) populate bug_group_map with data converted from old bug groupsets # 4) convert activity logs to use group names instead of numbers # 5) identify the admin from the old all-ones groupset # # ListBits(arg) returns a list of UNKNOWN if the group # has been deleted for all bits set in arg. When the activity # records are converted from groupset numbers to lists of # group names, ListBits is used to fill in a list of references # to groupset bits for groups that no longer exist. # sub ListBits { my ($num) = @_; my @res = (); my $curr = 1; while (1) { # Convert a big integer to a list of bits my $sth = $dbh->prepare("SELECT ($num & ~$curr) > 0, ($num & $curr), ($num & ~$curr), $curr << 1"); $sth->execute; my ($more, $thisbit, $remain, $nval) = $sth->fetchrow_array; push @res,"UNKNOWN<$curr>" if ($thisbit); $curr = $nval; $num = $remain; last if (!$more); } return @res; } # The groups system needs to be converted if groupset exists if ($dbh->bz_column_info("profiles", "groupset")) { $dbh->bz_add_column('groups', 'last_changed', {TYPE => 'DATETIME', NOTNULL => 1}, '0000-00-00 00:00:00'); # Some mysql versions will promote any unique key to primary key # so all unique keys are removed first and then added back in $dbh->bz_drop_index('groups', 'groups_bit_idx'); $dbh->bz_drop_index('groups', 'groups_name_idx'); if ($dbh->primary_key(undef, undef, 'groups')) { $dbh->do("ALTER TABLE groups DROP PRIMARY KEY"); } $dbh->bz_add_column('groups', 'id', {TYPE => 'MEDIUMSERIAL', NOTNULL => 1, PRIMARYKEY => 1}); $dbh->bz_add_index('groups', 'groups_name_idx', {TYPE => 'UNIQUE', FIELDS => [qw(name)]}); $dbh->bz_add_column('profiles', 'refreshed_when', {TYPE => 'DATETIME', NOTNULL => 1}, '0000-00-00 00:00:00'); # Convert all existing groupset records to map entries before removing # groupset fields or removing "bit" from groups. $sth = $dbh->prepare("SELECT bit, id FROM groups WHERE bit > 0"); $sth->execute(); while (my ($bit, $gid) = $sth->fetchrow_array) { # Create user_group_map membership grants for old groupsets. # Get each user with the old groupset bit set my $sth2 = $dbh->prepare("SELECT userid FROM profiles WHERE (groupset & $bit) != 0"); $sth2->execute(); while (my ($uid) = $sth2->fetchrow_array) { # Check to see if the user is already a member of the group # and, if not, insert a new record. my $query = "SELECT user_id FROM user_group_map WHERE group_id = $gid AND user_id = $uid AND isbless = 0"; my $sth3 = $dbh->prepare($query); $sth3->execute(); if ( !$sth3->fetchrow_array() ) { $dbh->do("INSERT INTO user_group_map (user_id, group_id, isbless, grant_type) VALUES($uid, $gid, 0, " . GRANT_DIRECT . ")"); } } # Create user can bless group grants for old groupsets, but only # if we're upgrading from a Bugzilla that had blessing. if($dbh->bz_column_info('profiles', 'blessgroupset')) { # Get each user with the old blessgroupset bit set $sth2 = $dbh->prepare("SELECT userid FROM profiles WHERE (blessgroupset & $bit) != 0"); $sth2->execute(); while (my ($uid) = $sth2->fetchrow_array) { $dbh->do("INSERT INTO user_group_map (user_id, group_id, isbless, grant_type) VALUES($uid, $gid, 1, " . GRANT_DIRECT . ")"); } } # Create bug_group_map records for old groupsets. # Get each bug with the old group bit set. $sth2 = $dbh->prepare("SELECT bug_id FROM bugs WHERE (groupset & $bit) != 0"); $sth2->execute(); while (my ($bug_id) = $sth2->fetchrow_array) { # Insert the bug, group pair into the bug_group_map. $dbh->do("INSERT INTO bug_group_map (bug_id, group_id) VALUES($bug_id, $gid)"); } } # Replace old activity log groupset records with lists of names of groups. # Start by defining the bug_group field and getting its id. AddFDef("bug_group", "Group", 0); $sth = $dbh->prepare("SELECT fieldid " . "FROM fielddefs " . "WHERE name = " . $dbh->quote('bug_group')); $sth->execute(); my ($bgfid) = $sth->fetchrow_array; # Get the field id for the old groupset field $sth = $dbh->prepare("SELECT fieldid " . "FROM fielddefs " . "WHERE name = " . $dbh->quote('groupset')); $sth->execute(); my ($gsid) = $sth->fetchrow_array; # Get all bugs_activity records from groupset changes if ($gsid) { $sth = $dbh->prepare("SELECT bug_id, bug_when, who, added, removed FROM bugs_activity WHERE fieldid = $gsid"); $sth->execute(); while (my ($bug_id, $bug_when, $who, $added, $removed) = $sth->fetchrow_array) { $added ||= 0; $removed ||= 0; # Get names of groups added. my $sth2 = $dbh->prepare("SELECT name " . "FROM groups " . "WHERE (bit & $added) != 0 " . "AND (bit & $removed) = 0"); $sth2->execute(); my @logadd = (); while (my ($n) = $sth2->fetchrow_array) { push @logadd, $n; } # Get names of groups removed. $sth2 = $dbh->prepare("SELECT name " . "FROM groups " . "WHERE (bit & $removed) != 0 " . "AND (bit & $added) = 0"); $sth2->execute(); my @logrem = (); while (my ($n) = $sth2->fetchrow_array) { push @logrem, $n; } # Get list of group bits added that correspond to missing groups. $sth2 = $dbh->prepare("SELECT ($added & ~BIT_OR(bit)) FROM groups"); $sth2->execute(); my ($miss) = $sth2->fetchrow_array; if ($miss) { push @logadd, ListBits($miss); print "\nWARNING - GROUPSET ACTIVITY ON BUG $bug_id CONTAINS DELETED GROUPS\n"; } # Get list of group bits deleted that correspond to missing groups. $sth2 = $dbh->prepare("SELECT ($removed & ~BIT_OR(bit)) FROM groups"); $sth2->execute(); ($miss) = $sth2->fetchrow_array; if ($miss) { push @logrem, ListBits($miss); print "\nWARNING - GROUPSET ACTIVITY ON BUG $bug_id CONTAINS DELETED GROUPS\n"; } my $logr = ""; my $loga = ""; $logr = join(", ", @logrem) . '?' if @logrem; $loga = join(", ", @logadd) . '?' if @logadd; # Replace to old activity record with the converted data. $dbh->do("UPDATE bugs_activity SET fieldid = $bgfid, added = " . $dbh->quote($loga) . ", removed = " . $dbh->quote($logr) . " WHERE bug_id = $bug_id AND bug_when = " . $dbh->quote($bug_when) . " AND who = $who AND fieldid = $gsid"); } # Replace groupset changes with group name changes in profiles_activity. # Get profiles_activity records for groupset. $sth = $dbh->prepare( "SELECT userid, profiles_when, who, newvalue, oldvalue " . "FROM profiles_activity " . "WHERE fieldid = $gsid"); $sth->execute(); while (my ($uid, $uwhen, $uwho, $added, $removed) = $sth->fetchrow_array) { $added ||= 0; $removed ||= 0; # Get names of groups added. my $sth2 = $dbh->prepare("SELECT name " . "FROM groups " . "WHERE (bit & $added) != 0 " . "AND (bit & $removed) = 0"); $sth2->execute(); my @logadd = (); while (my ($n) = $sth2->fetchrow_array) { push @logadd, $n; } # Get names of groups removed. $sth2 = $dbh->prepare("SELECT name " . "FROM groups " . "WHERE (bit & $removed) != 0 " . "AND (bit & $added) = 0"); $sth2->execute(); my @logrem = (); while (my ($n) = $sth2->fetchrow_array) { push @logrem, $n; } my $ladd = ""; my $lrem = ""; $ladd = join(", ", @logadd) . '?' if @logadd; $lrem = join(", ", @logrem) . '?' if @logrem; # Replace profiles_activity record for groupset change # with group list. $dbh->do("UPDATE profiles_activity " . "SET fieldid = $bgfid, newvalue = " . $dbh->quote($ladd) . ", oldvalue = " . $dbh->quote($lrem) . " WHERE userid = $uid AND profiles_when = " . $dbh->quote($uwhen) . " AND who = $uwho AND fieldid = $gsid"); } } # Identify admin group. my $sth = $dbh->prepare("SELECT id FROM groups WHERE name = 'admin'"); $sth->execute(); my ($adminid) = $sth->fetchrow_array(); # find existing admins # Don't lose admins from DBs where Bug 157704 applies $sth = $dbh->prepare( "SELECT userid, (groupset & 65536), login_name " . "FROM profiles " . "WHERE (groupset | 65536) = 9223372036854775807"); $sth->execute(); while ( my ($userid, $iscomplete, $login_name) = $sth->fetchrow_array() ) { # existing administrators are made members of group "admin" print "\nWARNING - $login_name IS AN ADMIN IN SPITE OF BUG 157704\n\n" if (!$iscomplete); push @admins, $userid; } $dbh->bz_drop_column('profiles','groupset'); $dbh->bz_drop_column('profiles','blessgroupset'); $dbh->bz_drop_column('bugs','groupset'); $dbh->bz_drop_column('groups','bit'); $dbh->do("DELETE FROM fielddefs WHERE name = " . $dbh->quote('groupset')); } # September 2002 myk@mozilla.org bug 98801 # Convert the attachment statuses tables into flags tables. if ($dbh->bz_table_info("attachstatuses") && $dbh->bz_table_info("attachstatusdefs")) { print "Converting attachment statuses to flags...\n"; # Get IDs for the old attachment status and new flag fields. $sth = $dbh->prepare("SELECT fieldid FROM fielddefs " . "WHERE name='attachstatusdefs.name'"); $sth->execute(); my $old_field_id = $sth->fetchrow_arrayref()->[0] || 0; $sth = $dbh->prepare("SELECT fieldid FROM fielddefs " . "WHERE name='flagtypes.name'"); $sth->execute(); my $new_field_id = $sth->fetchrow_arrayref()->[0]; # Convert attachment status definitions to flag types. If more than one # status has the same name and description, it is merged into a single # status with multiple inclusion records. $sth = $dbh->prepare("SELECT id, name, description, sortkey, product_id " . "FROM attachstatusdefs"); # status definition IDs indexed by name/description my $def_ids = {}; # merged IDs and the IDs they were merged into. The key is the old ID, # the value is the new one. This allows us to give statuses the right # ID when we convert them over to flags. This map includes IDs that # weren't merged (in this case the old and new IDs are the same), since # it makes the code simpler. my $def_id_map = {}; $sth->execute(); while (my ($id, $name, $desc, $sortkey, $prod_id) = $sth->fetchrow_array()) { my $key = $name . $desc; if (!$def_ids->{$key}) { $def_ids->{$key} = $id; my $quoted_name = $dbh->quote($name); my $quoted_desc = $dbh->quote($desc); $dbh->do("INSERT INTO flagtypes (id, name, description, sortkey, " . "target_type) VALUES ($id, $quoted_name, $quoted_desc, " . "$sortkey, 'a')"); } $def_id_map->{$id} = $def_ids->{$key}; $dbh->do("INSERT INTO flaginclusions (type_id, product_id) " . "VALUES ($def_id_map->{$id}, $prod_id)"); } # Note: even though we've converted status definitions, we still can't drop # the table because we need it to convert the statuses themselves. # Convert attachment statuses to flags. To do this we select the statuses # from the status table and then, for each one, figure out who set it # and when they set it from the bugs activity table. my $id = 0; $sth = $dbh->prepare( "SELECT attachstatuses.attach_id, attachstatusdefs.id, " . "attachstatusdefs.name, attachments.bug_id " . "FROM attachstatuses, attachstatusdefs, attachments " . "WHERE attachstatuses.statusid = attachstatusdefs.id " . "AND attachstatuses.attach_id = attachments.attach_id"); # a query to determine when the attachment status was set and who set it my $sth2 = $dbh->prepare("SELECT added, who, bug_when " . "FROM bugs_activity " . "WHERE bug_id = ? AND attach_id = ? " . "AND fieldid = $old_field_id " . "ORDER BY bug_when DESC"); $sth->execute(); while (my ($attach_id, $def_id, $status, $bug_id) = $sth->fetchrow_array()) { ++$id; # Determine when the attachment status was set and who set it. # We should always be able to find out this info from the bug activity, # but we fall back to default values just in case. $sth2->execute($bug_id, $attach_id); my ($added, $who, $when); while (($added, $who, $when) = $sth2->fetchrow_array()) { last if $added =~ /(^|[, ]+)\Q$status\E([, ]+|$)/; } $who = $dbh->quote($who); # "NULL" by default if $who is undefined $when = $when ? $dbh->quote($when) : "NOW()"; $dbh->do("INSERT INTO flags (id, type_id, status, bug_id, attach_id, " . "creation_date, modification_date, requestee_id, setter_id) " . "VALUES ($id, $def_id_map->{$def_id}, '+', $bug_id, " . "$attach_id, $when, $when, NULL, $who)"); } # Now that we've converted both tables we can drop them. $dbh->bz_drop_table("attachstatuses"); $dbh->bz_drop_table("attachstatusdefs"); # Convert activity records for attachment statuses into records for flags. my $sth = $dbh->prepare("SELECT attach_id, who, bug_when, added, removed " . "FROM bugs_activity WHERE fieldid = $old_field_id"); $sth->execute(); while (my ($attach_id, $who, $when, $old_added, $old_removed) = $sth->fetchrow_array()) { my @additions = split(/[, ]+/, $old_added); @additions = map("$_+", @additions); my $new_added = $dbh->quote(join(", ", @additions)); my @removals = split(/[, ]+/, $old_removed); @removals = map("$_+", @removals); my $new_removed = $dbh->quote(join(", ", @removals)); $old_added = $dbh->quote($old_added); $old_removed = $dbh->quote($old_removed); $who = $dbh->quote($who); $when = $dbh->quote($when); $dbh->do("UPDATE bugs_activity SET fieldid = $new_field_id, " . "added = $new_added, removed = $new_removed " . "WHERE attach_id = $attach_id AND who = $who " . "AND bug_when = $when AND fieldid = $old_field_id " . "AND added = $old_added AND removed = $old_removed"); } # Remove the attachment status field from the field definitions. $dbh->do("DELETE FROM fielddefs WHERE name='attachstatusdefs.name'"); print "done.\n"; } # 2004-12-13 Nick.Barnes@pobox.com bug 262268 # Check for spaces and commas in flag type names; if found, rename them. if ($dbh->bz_table_info("flagtypes")) { # Get all names and IDs, to find broken ones and to # check for collisions when renaming. $sth = $dbh->prepare("SELECT name, id FROM flagtypes"); $sth->execute(); my %flagtypes; my @badflagnames; # find broken flagtype names, and populate a hash table # to check for collisions. while (my ($name, $id) = $sth->fetchrow_array()) { $flagtypes{$name} = $id; if ($name =~ /[ ,]/) { push(@badflagnames, $name); } } if (@badflagnames) { print "Removing spaces and commas from flag names...\n"; my ($flagname, $tryflagname); my $sth = $dbh->prepare("UPDATE flagtypes SET name = ? WHERE id = ?"); foreach $flagname (@badflagnames) { print " Bad flag type name \"$flagname\" ...\n"; # find a new name for this flagtype. ($tryflagname = $flagname) =~ tr/ ,/__/; # avoid collisions with existing flagtype names. while (defined($flagtypes{$tryflagname})) { print " ... can't rename as \"$tryflagname\" ...\n"; $tryflagname .= "'"; if (length($tryflagname) > 50) { my $lastchanceflagname = (substr $tryflagname, 0, 47) . '...'; if (defined($flagtypes{$lastchanceflagname})) { print " ... last attempt as \"$lastchanceflagname\" still failed.'\n", "Rename the flag by hand and run checksetup.pl again.\n"; die("Bad flag type name $flagname"); } $tryflagname = $lastchanceflagname; } } $sth->execute($tryflagname, $flagtypes{$flagname}); print " renamed flag type \"$flagname\" as \"$tryflagname\"\n"; $flagtypes{$tryflagname} = $flagtypes{$flagname}; delete $flagtypes{$flagname}; } print "... done.\n"; } } # 2002-11-24 - bugreport@peshkin.net - bug 147275 # # If group_control_map is empty, backward-compatbility # usebuggroups-equivalent records should be created. my $entry = Param('useentrygroupdefault'); $sth = $dbh->prepare("SELECT COUNT(*) FROM group_control_map"); $sth->execute(); my ($mapcnt) = $sth->fetchrow_array(); if ($mapcnt == 0) { # Initially populate group_control_map. # First, get all the existing products and their groups. $sth = $dbh->prepare("SELECT groups.id, products.id, groups.name, " . "products.name FROM groups, products " . "WHERE isbuggroup != 0"); $sth->execute(); while (my ($groupid, $productid, $groupname, $productname) = $sth->fetchrow_array()) { if ($groupname eq $productname) { # Product and group have same name. $dbh->do("INSERT INTO group_control_map " . "(group_id, product_id, entry, membercontrol, " . "othercontrol, canedit) " . "VALUES ($groupid, $productid, $entry, " . CONTROLMAPDEFAULT . ", " . CONTROLMAPNA . ", 0)"); } else { # See if this group is a product group at all. my $sth2 = $dbh->prepare("SELECT id FROM products WHERE name = " . $dbh->quote($groupname)); $sth2->execute(); my ($id) = $sth2->fetchrow_array(); if (!$id) { # If there is no product with the same name as this # group, then it is permitted for all products. $dbh->do("INSERT INTO group_control_map " . "(group_id, product_id, entry, membercontrol, " . "othercontrol, canedit) " . "VALUES ($groupid, $productid, 0, " . CONTROLMAPSHOWN . ", " . CONTROLMAPNA . ", 0)"); } } } } # 2004-07-17 GRM - Remove "subscriptions" concept from charting, and add # group-based security instead. if ($dbh->bz_table_info("user_series_map")) { # Oracle doesn't like "date" as a column name, and apparently some DBs # don't like 'value' either. We use the changes to subscriptions as # something to hang these renamings off. $dbh->bz_rename_column('series_data', 'date', 'series_date'); $dbh->bz_rename_column('series_data', 'value', 'series_value'); # series_categories.category_id produces a too-long column name for the # auto-incrementing sequence (Oracle again). $dbh->bz_rename_column('series_categories', 'category_id', 'id'); $dbh->bz_add_column("series", "public", {TYPE => 'BOOLEAN', NOTNULL => 1, DEFAULT => 'FALSE'}); # Migrate public-ness across from user_series_map to new field $sth = $dbh->prepare("SELECT series_id from user_series_map " . "WHERE user_id = 0"); $sth->execute(); while (my ($public_series_id) = $sth->fetchrow_array()) { $dbh->do("UPDATE series SET public = 1 " . "WHERE series_id = $public_series_id"); } $dbh->bz_drop_table("user_series_map"); } # 2003-06-26 Copy the old charting data into the database, and create the # queries that will keep it all running. When the old charting system goes # away, if this code ever runs, it'll just find no files and do nothing. my $series_exists = $dbh->selectrow_array("SELECT 1 FROM series " . $dbh->sql_limit(1)); if (!$series_exists) { print "Migrating old chart data into database ...\n" unless $silent; require Bugzilla::Series; # We prepare the handle to insert the series data my $seriesdatasth = $dbh->prepare("INSERT INTO series_data " . "(series_id, series_date, series_value) " . "VALUES (?, ?, ?)"); my $deletesth = $dbh->prepare("DELETE FROM series_data WHERE series_id = ? AND series_date = ?"); my $groupmapsth = $dbh->prepare("INSERT INTO category_group_map " . "(category_id, group_id) " . "VALUES (?, ?)"); # Fields in the data file (matches the current collectstats.pl) my @statuses = qw(NEW ASSIGNED REOPENED UNCONFIRMED RESOLVED VERIFIED CLOSED); my @resolutions = qw(FIXED INVALID WONTFIX LATER REMIND DUPLICATE WORKSFORME MOVED); my @fields = (@statuses, @resolutions); # We have a localisation problem here. Where do we get these values? my $all_name = "-All-"; my $open_name = "All Open"; # We can't give the Series we create a meaningful owner; that's not a big # problem. But we do need to set this global, otherwise Series.pm objects. $::userid = 0; my $products = $dbh->selectall_arrayref("SELECT name FROM products"); foreach my $product ((map { $_->[0] } @$products), "-All-") { # First, create the series my %queries; my %seriesids; my $query_prod = ""; if ($product ne "-All-") { $query_prod = "product=" . html_quote($product) . "&"; } # The query for statuses is different to that for resolutions. $queries{$_} = ($query_prod . "bug_status=$_") foreach (@statuses); $queries{$_} = ($query_prod . "resolution=$_") foreach (@resolutions); foreach my $field (@fields) { # Create a Series for each field in this product my $series = new Bugzilla::Series(undef, $product, $all_name, $field, $::userid, 1, $queries{$field}, 1); $series->writeToDatabase(); $seriesids{$field} = $series->{'series_id'}; } # We also add a new query for "Open", so that migrated products get # the same set as new products (see editproducts.cgi.) my @openedstatuses = ("UNCONFIRMED", "NEW", "ASSIGNED", "REOPENED"); my $query = join("&", map { "bug_status=$_" } @openedstatuses); my $series = new Bugzilla::Series(undef, $product, $all_name, $open_name, $::userid, 1, $query_prod . $query, 1); $series->writeToDatabase(); $seriesids{$open_name} = $series->{'series_id'}; # Now, we attempt to read in historical data, if any # Convert the name in the same way that collectstats.pl does my $product_file = $product; $product_file =~ s/\//-/gs; $product_file = "$datadir/mining/$product_file"; # There are many reasons that this might fail (e.g. no stats for this # product), so we don't worry if it does. open(IN, $product_file) or next; # The data files should be in a standard format, even for old # Bugzillas, because of the conversion code further up this file. my %data; my $last_date = ""; while () { if (/^(\d+\|.*)/) { my @numbers = split(/\||\r/, $1); # Only take the first line for each date; it was possible to # run collectstats.pl more than once in a day. next if $numbers[0] eq $last_date; for my $i (0 .. $#fields) { # $numbers[0] is the date $data{$fields[$i]}{$numbers[0]} = $numbers[$i + 1]; # Keep a total of the number of open bugs for this day if (IsOpenedState($fields[$i])) { $data{$open_name}{$numbers[0]} += $numbers[$i + 1]; } } $last_date = $numbers[0]; } } close(IN); foreach my $field (@fields, $open_name) { # Insert values into series_data: series_id, date, value my %fielddata = %{$data{$field}}; foreach my $date (keys %fielddata) { # We need to delete in case the text file had duplicate entries # in it. $deletesth->execute($seriesids{$field}, $date); # We prepared this above $seriesdatasth->execute($seriesids{$field}, $date, $fielddata{$date} || 0); } } # Create the groupsets for the category my $category_id = $dbh->selectrow_array("SELECT id " . "FROM series_categories " . "WHERE name = " . $dbh->quote($product)); my $product_id = $dbh->selectrow_array("SELECT id " . "FROM products " . "WHERE name = " . $dbh->quote($product)); if (defined($category_id) && defined($product_id)) { # Get all the mandatory groups for this product my $group_ids = $dbh->selectcol_arrayref("SELECT group_id " . "FROM group_control_map " . "WHERE product_id = $product_id " . "AND (membercontrol = " . CONTROLMAPMANDATORY . " OR othercontrol = " . CONTROLMAPMANDATORY . ")"); foreach my $group_id (@$group_ids) { $groupmapsth->execute($category_id, $group_id); } } } } AddFDef("owner_idle_time", "Time Since Assignee Touched", 0); # 2004-04-12 - Keep regexp-based group permissions up-to-date - Bug 240325 if ($dbh->bz_column_info("user_group_map", "isderived")) { $dbh->bz_add_column('user_group_map', 'grant_type', {TYPE => 'INT1', NOTNULL => 1, DEFAULT => '0'}); $dbh->do("DELETE FROM user_group_map WHERE isderived != 0"); $dbh->do("UPDATE user_group_map SET grant_type = " . GRANT_DIRECT); $dbh->bz_drop_column("user_group_map", "isderived"); $dbh->bz_drop_index('user_group_map', 'user_group_map_user_id_idx'); $dbh->bz_add_index('user_group_map', 'user_group_map_user_id_idx', {TYPE => 'UNIQUE', FIELDS => [qw(user_id group_id grant_type isbless)]}); # Make sure groups get rederived $dbh->do("UPDATE groups SET last_changed = NOW() WHERE name = 'admin'"); } # 2004-07-03 - Make it possible to disable flags without deleting them # from the database. Bug 223878, jouni@heikniemi.net $dbh->bz_add_column('flags', 'is_active', {TYPE => 'BOOLEAN', NOTNULL => 1, DEFAULT => 'TRUE'}); # 2004-07-16 - Make it possible to have group-group relationships other than # membership and bless. if ($dbh->bz_column_info("group_group_map", "isbless")) { $dbh->bz_add_column('group_group_map', 'grant_type', {TYPE => 'INT1', NOTNULL => 1, DEFAULT => '0'}); $dbh->do("UPDATE group_group_map SET grant_type = " . "IF(isbless, " . GROUP_BLESS . ", " . GROUP_MEMBERSHIP . ")"); $dbh->bz_drop_index('group_group_map', 'group_group_map_member_id_idx'); $dbh->bz_drop_column("group_group_map", "isbless"); $dbh->bz_add_index('group_group_map', 'group_group_map_member_id_idx', {TYPE => 'UNIQUE', FIELDS => [qw(member_id grantor_id grant_type)]}); } # Allow profiles to optionally be linked to a unique identifier in an outside # login data source $dbh->bz_add_column("profiles", "extern_id", {TYPE => 'varchar(64)'}); # 2004-11-20 - LpSolit@netscape.net - Bug 180879 # Add grant and request groups for flags $dbh->bz_add_column('flagtypes', 'grant_group_id', {TYPE => 'INT3'}); $dbh->bz_add_column('flagtypes', 'request_group_id', {TYPE => 'INT3'}); # 2004-01-03 - bug 253721 erik@dasbistro.com # mailto is no longer just userids $dbh->bz_rename_column('whine_schedules', 'mailto_userid', 'mailto'); $dbh->bz_add_column('whine_schedules', 'mailto_type', {TYPE => 'INT2', NOTNULL => 1, DEFAULT => '0'}); # 2005-01-29 - mkanat@bugzilla.org if (!$dbh->bz_column_info('longdescs', 'already_wrapped')) { # Old, pre-wrapped comments should not be auto-wrapped $dbh->bz_add_column('longdescs', 'already_wrapped', {TYPE => 'BOOLEAN', NOTNULL => 1, DEFAULT => 'FALSE'}, 1); # If an old comment doesn't have a newline in the first 80 characters, # (or doesn't contain a newline at all) and it contains a space, # then it's probably a mis-wrapped comment and we should wrap it # at display-time. print "Fixing old, mis-wrapped comments...\n"; $dbh->do(q{UPDATE longdescs SET already_wrapped = 0 WHERE (} . $dbh->sql_position(q{'\n'}, 'thetext') . q{ > 80 OR } . $dbh->sql_position(q{'\n'}, 'thetext') . q{ = 0) AND SUBSTRING(thetext FROM 1 FOR 80) LIKE '% %'}); } # 2001-09-03 (landed 2005-02-24) dkl@redhat.com bug 17453 # Moved enum types to separate tables so we need change the old enum types to # standard varchars in the bugs table. $dbh->bz_alter_column('bugs', 'bug_status', {TYPE => 'varchar(64)', NOTNULL => 1}); # 2005-03-23 Tomas.Kopal@altap.cz - add default value to resolution, bug 286695 $dbh->bz_alter_column('bugs', 'resolution', {TYPE => 'varchar(64)', NOTNULL => 1, DEFAULT => "''"}); $dbh->bz_alter_column('bugs', 'priority', {TYPE => 'varchar(64)', NOTNULL => 1}); $dbh->bz_alter_column('bugs', 'bug_severity', {TYPE => 'varchar(64)', NOTNULL => 1}); $dbh->bz_alter_column('bugs', 'rep_platform', {TYPE => 'varchar(64)', NOTNULL => 1}, ''); $dbh->bz_alter_column('bugs', 'op_sys', {TYPE => 'varchar(64)', NOTNULL => 1}); # 2005-02-20 - LpSolit@gmail.com - Bug 277504 # When migrating quips from the '$datadir/comments' file to the DB, # the user ID should be NULL instead of 0 (which is an invalid user ID). if ($dbh->bz_column_info('quips', 'userid')->{NOTNULL}) { $dbh->bz_alter_column('quips', 'userid', {TYPE => 'INT3'}); print "Changing owner to NULL for quips where the owner is unknown...\n"; $dbh->do('UPDATE quips SET userid = NULL WHERE userid = 0'); } # 2005-02-21 - LpSolit@gmail.com - Bug 279910 # qacontact_accessible and assignee_accessible field names no longer exist # in the 'bugs' table. Their corresponding entries in the 'bugs_activity' # table should therefore be marked as obsolete, meaning that they cannot # be used anymore when querying the database - they are not deleted in # order to keep track of these fields in the activity table. if (!$dbh->bz_column_info('fielddefs', 'obsolete')) { $dbh->bz_add_column('fielddefs', 'obsolete', {TYPE => 'BOOLEAN', NOTNULL => 1, DEFAULT => 'FALSE'}); print "Marking qacontact_accessible and assignee_accessible as obsolete fields...\n"; $dbh->do("UPDATE fielddefs SET obsolete = 1 WHERE name = 'qacontact_accessible' OR name = 'assignee_accessible'"); } # Add fulltext indexes for bug summaries and descriptions/comments. if (!$dbh->bz_index_info('bugs', 'bugs_short_desc_idx')) { print "Adding full-text index for short_desc column in bugs table...\n"; $dbh->bz_add_index('bugs', 'bugs_short_desc_idx', {TYPE => 'FULLTEXT', FIELDS => [qw(short_desc)]}); } # Right now, we only create the "thetext" index on MySQL. if ($dbh->isa('Bugzilla::DB::Mysql') && !$dbh->bz_index_info('longdescs', 'longdescs_thetext_idx')) { print "Adding full-text index for thetext column in longdescs table...\n"; $dbh->bz_add_index('longdescs', 'longdescs_thetext_idx', {TYPE => 'FULLTEXT', FIELDS => [qw(thetext)]}); } # 2002 November, myk@mozilla.org, bug 178841: # # Convert the "attachments.filename" column from a ridiculously large # "mediumtext" to a much more sensible "varchar(100)". Also takes # the opportunity to remove paths from existing filenames, since they # shouldn't be there for security. Buggy browsers include them, # and attachment.cgi now takes them out, but old ones need converting. # { my $ref = $dbh->bz_column_info("attachments", "filename"); if ($ref->{TYPE} ne 'varchar(100)') { print "Removing paths from filenames in attachments table...\n"; $sth = $dbh->prepare("SELECT attach_id, filename FROM attachments " . "WHERE " . $dbh->sql_position(q{'/'}, 'filename') . " > 0 OR " . $dbh->sql_position(q{'\\\\'}, 'filename') . " > 0"); $sth->execute; while (my ($attach_id, $filename) = $sth->fetchrow_array) { $filename =~ s/^.*[\/\\]//; my $quoted_filename = $dbh->quote($filename); $dbh->do("UPDATE attachments SET filename = $quoted_filename " . "WHERE attach_id = $attach_id"); } print "Done.\n"; print "Resizing attachments.filename from mediumtext to varchar(100).\n"; $dbh->bz_alter_column("attachments", "filename", {TYPE => 'varchar(100)', NOTNULL => 1}); } } # 2003-01-11, burnus@net-b.de, bug 184309 # Support for quips approval $dbh->bz_add_column('quips', 'approved', {TYPE => 'BOOLEAN', NOTNULL => 1, DEFAULT => 'TRUE'}); # 2002-12-20 Bug 180870 - remove manual shadowdb replication code $dbh->bz_drop_table("shadowlog"); # 2003-04-27 - bugzilla@chimpychompy.org (GavinS) # # Bug 180086 (http://bugzilla.mozilla.org/show_bug.cgi?id=180086) # # Renaming the 'count' column in the votes table because Sybase doesn't # like it if ($dbh->bz_column_info('votes', 'count')) { # 2003-04-24 - myk@mozilla.org/bbaetz@acm.org, bug 201018 # Force all cached groups to be updated at login, due to security bug # Do this here, inside the next schema change block, so that it doesn't # get invalidated on every checksetup run. $dbh->do("UPDATE profiles SET refreshed_when='1900-01-01 00:00:00'"); $dbh->bz_rename_column('votes', 'count', 'vote_count'); } # 2004/02/15 - Summaries shouldn't be null - see bug 220232 $dbh->bz_alter_column('bugs', 'short_desc', {TYPE => 'MEDIUMTEXT', NOTNULL => 1}, ''); # 2003-10-24 - alt@sonic.net, bug 224208 # Support classification level $dbh->bz_add_column('products', 'classification_id', {TYPE => 'INT2', NOTNULL => 1, DEFAULT => '1'}); # 2005-01-12 Nick Barnes bug 278010 # Rename any group which has an empty name. # Note that there can be at most one such group (because of # the SQL index on the name column). $sth = $dbh->prepare("SELECT id FROM groups where name = ''"); $sth->execute(); my ($emptygroupid) = $sth->fetchrow_array(); if ($emptygroupid) { # There is a group with an empty name; find a name to rename it # as. Must avoid collisions with existing names. Start with # group_$gid and add _ if necessary. my $trycount = 0; my $trygroupname; my $trygroupsth = $dbh->prepare("SELECT id FROM groups where name = ?"); do { $trygroupname = "group_$emptygroupid"; if ($trycount > 0) { $trygroupname .= "_$trycount"; } $trygroupsth->execute($trygroupname); if ($trygroupsth->rows > 0) { $trycount ++; } } while ($trygroupsth->rows > 0); $sth = $dbh->prepare("UPDATE groups SET name = ? " . "WHERE id = $emptygroupid"); $sth->execute($trygroupname); print "Group $emptygroupid had an empty name; renamed as '$trygroupname'.\n"; } # 2005-02-12 bugreport@peshkin.net, bug 281787 $dbh->bz_add_index('bugs_activity', 'bugs_activity_who_idx', [qw(who)]); # This lastdiffed change and these default changes are unrelated, # but in order for MySQL to successfully run these default changes only once, # they have to be inside this block. # If bugs.lastdiffed is NOT NULL... if($dbh->bz_column_info('bugs', 'lastdiffed')->{NOTNULL}) { # Add defaults for some fields that should have them but didn't. $dbh->bz_alter_column('bugs', 'status_whiteboard', {TYPE => 'MEDIUMTEXT', NOTNULL => 1, DEFAULT => "''"}); $dbh->bz_alter_column('bugs', 'keywords', {TYPE => 'MEDIUMTEXT', NOTNULL => 1, DEFAULT => "''"}); $dbh->bz_alter_column('bugs', 'votes', {TYPE => 'INT3', NOTNULL => 1, DEFAULT => '0'}); # And change lastdiffed to NULL $dbh->bz_alter_column('bugs', 'lastdiffed', {TYPE => 'DATETIME'}); } # 2005-03-09 qa_contact should be NULL instead of 0, bug 285534 if ($dbh->bz_column_info('bugs', 'qa_contact')->{NOTNULL}) { $dbh->bz_alter_column('bugs', 'qa_contact', {TYPE => 'INT3'}); $dbh->do("UPDATE bugs SET qa_contact = NULL WHERE qa_contact = 0"); } # 2005-03-27 initialqacontact should be NULL instead of 0, bug 287483 if ($dbh->bz_column_info('components', 'initialqacontact')->{NOTNULL}) { $dbh->bz_alter_column('components', 'initialqacontact', {TYPE => 'INT3'}); $dbh->do("UPDATE components SET initialqacontact = NULL " . "WHERE initialqacontact = 0"); } # 2005-03-29 - gerv@gerv.net - bug 73665. # Migrate email preferences to new email prefs table. if ($dbh->bz_column_info("profiles", "emailflags")) { print "Migrating email preferences to new table ...\n" unless $silent; # These are the "roles" and "reasons" from the original code, mapped to # the new terminology of relationships and events. my %relationships = ("Owner" => REL_ASSIGNEE, "Reporter" => REL_REPORTER, "QAcontact" => REL_QA, "CClist" => REL_CC, "Voter" => REL_VOTER); my %events = ("Removeme" => EVT_ADDED_REMOVED, "Comments" => EVT_COMMENT, "Attachments" => EVT_ATTACHMENT, "Status" => EVT_PROJ_MANAGEMENT, "Resolved" => EVT_OPENED_CLOSED, "Keywords" => EVT_KEYWORD, "CC" => EVT_CC, "Other" => EVT_OTHER, "Unconfirmed" => EVT_UNCONFIRMED); # Request preferences my %requestprefs = ("FlagRequestee" => EVT_FLAG_REQUESTED, "FlagRequester" => EVT_REQUESTED_FLAG); # Select all emailflags flag strings my $sth = $dbh->prepare("SELECT userid, emailflags FROM profiles"); $sth->execute(); while (my ($userid, $flagstring) = $sth->fetchrow_array()) { # If the user has never logged in since emailprefs arrived, and the # temporary code to give them a default string never ran, then # $flagstring will be null. In this case, they just get all mail. $flagstring ||= ""; # The 255 param is here, because without a third param, split will # trim any trailing null fields, which causes Perl to eject lots of # warnings. Any suitably large number would do. my %emailflags = split(/~/, $flagstring, 255); # Appease my editor: / my $sth2 = $dbh->prepare("INSERT into email_setting " . "(user_id, relationship, event) VALUES (" . "$userid, ?, ?)"); foreach my $relationship (keys %relationships) { foreach my $event (keys %events) { my $key = "email$relationship$event"; if (!exists($emailflags{$key}) || $emailflags{$key} eq 'on') { $sth2->execute($relationships{$relationship}, $events{$event}); } } } # Note that in the old system, the value of "excludeself" is assumed to # be off if the preference does not exist in the user's list, unlike # other preferences whose value is assumed to be on if they do not # exist. # # This preference has changed from global to per-relationship. if (!exists($emailflags{'ExcludeSelf'}) || $emailflags{'ExcludeSelf'} ne 'on') { foreach my $relationship (keys %relationships) { $dbh->do("INSERT into email_setting " . "(user_id, relationship, event) VALUES (" . $userid . ", " . $relationships{$relationship}. ", " . EVT_CHANGED_BY_ME . ")"); } } foreach my $key (keys %requestprefs) { if (!exists($emailflags{$key}) || $emailflags{$key} eq 'on') { $dbh->do("INSERT into email_setting " . "(user_id, relationship, event) VALUES (" . $userid . ", " . REL_ANY . ", " . $requestprefs{$key} . ")"); } } } # EVT_ATTACHMENT_DATA should initially have identical settings to # EVT_ATTACHMENT. CloneEmailEvent(EVT_ATTACHMENT, EVT_ATTACHMENT_DATA); $dbh->bz_drop_column("profiles", "emailflags"); } sub CloneEmailEvent { my ($source, $target) = @_; my $sth1 = $dbh->prepare("SELECT user_id, relationship FROM email_setting WHERE event = $source"); my $sth2 = $dbh->prepare("INSERT into email_setting " . "(user_id, relationship, event) VALUES (" . "?, ?, $target)"); $sth1->execute(); while (my ($userid, $relationship) = $sth1->fetchrow_array()) { $sth2->execute($userid, $relationship); } } # 2005-03-27: Standardize all boolean fields to plain "tinyint" if ( $dbh->isa('Bugzilla::DB::Mysql') ) { # This is a change to make things consistent with Schema, so we use # direct-database access methods. my $quip_info_sth = $dbh->column_info(undef, undef, 'quips', '%'); my $quips_cols = $quip_info_sth->fetchall_hashref("COLUMN_NAME"); my $approved_col = $quips_cols->{'approved'}; if ( $approved_col->{TYPE_NAME} eq 'TINYINT' and $approved_col->{COLUMN_SIZE} == 1 ) { $dbh->bz_alter_column_raw('series', 'public', {TYPE => 'BOOLEAN', NOTNULL => 1, DEFAULT => '0'}); $dbh->bz_alter_column_raw('bug_status', 'isactive', {TYPE => 'BOOLEAN', NOTNULL => 1, DEFAULT => '1'}); $dbh->bz_alter_column_raw('rep_platform', 'isactive', {TYPE => 'BOOLEAN', NOTNULL => 1, DEFAULT => '1'}); $dbh->bz_alter_column_raw('resolution', 'isactive', {TYPE => 'BOOLEAN', NOTNULL => 1, DEFAULT => '1'}); $dbh->bz_alter_column_raw('op_sys', 'isactive', {TYPE => 'BOOLEAN', NOTNULL => 1, DEFAULT => '1'}); $dbh->bz_alter_column_raw('bug_severity', 'isactive', {TYPE => 'BOOLEAN', NOTNULL => 1, DEFAULT => '1'}); $dbh->bz_alter_column_raw('priority', 'isactive', {TYPE => 'BOOLEAN', NOTNULL => 1, DEFAULT => '1'}); $dbh->bz_alter_column_raw('quips', 'approved', {TYPE => 'BOOLEAN', NOTNULL => 1, DEFAULT => '1'}); } } # 2005-04-07 - alt@sonic.net, bug 289455 # make classification_id field type be consistent with DB:Schema $dbh->bz_alter_column('products', 'classification_id', {TYPE => 'INT2', NOTNULL => 1, DEFAULT => '1'}); # initialowner was accidentally NULL when we checked-in Schema, # when it really should be NOT NULL. $dbh->bz_alter_column('components', 'initialowner', {TYPE => 'INT3', NOTNULL => 1}, 0); # 2005-03-28 - bug 238800 - index flags.type_id to make editflagtypes.cgi speedy $dbh->bz_add_index('flags', 'flags_type_id_idx', [qw(type_id)]); # For a short time, the flags_type_id_idx was misnamed in upgraded installs. $dbh->bz_drop_index('flags', 'type_id'); # 2005-04-28 - LpSolit@gmail.com - Bug 7233: add an index to versions $dbh->bz_alter_column('versions', 'value', {TYPE => 'varchar(64)', NOTNULL => 1}); $dbh->bz_add_index('versions', 'versions_product_id_idx', {TYPE => 'UNIQUE', FIELDS => [qw(product_id value)]}); # Milestone sortkeys get a default just like all other sortkeys. if (!exists $dbh->bz_column_info('milestones', 'sortkey')->{DEFAULT}) { $dbh->bz_alter_column('milestones', 'sortkey', {TYPE => 'INT2', NOTNULL => 1, DEFAULT => 0}); } # 2005-06-14 - LpSolit@gmail.com - Bug 292544: only set creation_ts # when all bug fields have been correctly set. $dbh->bz_alter_column('bugs', 'creation_ts', {TYPE => 'DATETIME'}); if (!exists $dbh->bz_column_info('whine_queries', 'title')->{DEFAULT}) { # The below change actually has nothing to do with the whine_queries # change, it just has to be contained within a schema change so that # it doesn't run every time we run checksetup. # Old Bugzillas have "other" as an OS choice, new ones have "Other" # (capital O). # XXX - This should be moved inside of a later schema change, once # we have one to move it to the inside of. print "Setting any 'other' op_sys to 'Other'...\n"; $dbh->do('UPDATE op_sys SET value = ? WHERE value = ?', undef, "Other", "other"); $dbh->do('UPDATE bugs SET op_sys = ? WHERE op_sys = ?', undef, "Other", "other"); if (Param('defaultopsys') eq 'other') { # We can't actually fix the param here, because WriteParams() will # make $datadir/params unwriteable to the webservergroup. # It's too much of an ugly hack to copy the permission-fixing code # down to here. (It would create more potential future bugs than # it would solve problems.) print "WARNING: Your 'defaultopsys' param is set to 'other', but" . " Bugzilla now\n" . " uses 'Other' (capital O).\n"; } # Add a DEFAULT to whine_queries stuff so that editwhines.cgi # works on PostgreSQL. $dbh->bz_alter_column('whine_queries', 'title', {TYPE => 'varchar(128)', NOTNULL => 1, DEFAULT => "''"}); } # If you had to change the --TABLE-- definition in any way, then add your # differential change code *** A B O V E *** this comment. # # That is: if you add a new field, you first search for the first occurrence # of --TABLE-- and add your field to into the table hash. This new setting # would be honored for every new installation. Then add your # bz_add_field/bz_drop_field/bz_change_field_type/bz_rename_field code above. # This would then be honored by everyone who updates his Bugzilla installation. # # # BugZilla uses --GROUPS-- to assign various rights to its users. # AddGroup('tweakparams', 'Can tweak operating parameters'); AddGroup('editusers', 'Can edit or disable users'); AddGroup('creategroups', 'Can create and destroy groups.'); AddGroup('editclassifications', 'Can create, destroy, and edit classifications.'); AddGroup('editcomponents', 'Can create, destroy, and edit components.'); AddGroup('editkeywords', 'Can create, destroy, and edit keywords.'); AddGroup('admin', 'Administrators'); # 2005-06-29 bugreport@peshkin.net, bug 299156 if ($dbh->bz_index_info('attachments', 'attachments_submitter_id_idx') && (scalar(@{$dbh->bz_index_info('attachments', 'attachments_submitter_id_idx' )->{FIELDS}}) < 2) ) { $dbh->bz_drop_index('attachments', 'attachments_submitter_id_idx'); } $dbh->bz_add_index('attachments', 'attachments_submitter_id_idx', [qw(submitter_id bug_id)]); if (!GroupDoesExist("editbugs")) { my $id = AddGroup('editbugs', 'Can edit all bug fields.', ".*"); my $sth = $dbh->prepare("SELECT userid FROM profiles"); $sth->execute(); while (my ($userid) = $sth->fetchrow_array()) { $dbh->do("INSERT INTO user_group_map (user_id, group_id, isbless, grant_type) VALUES ($userid, $id, 0, " . GRANT_DIRECT . ")"); } } if (!GroupDoesExist("canconfirm")) { my $id = AddGroup('canconfirm', 'Can confirm a bug.', ".*"); my $sth = $dbh->prepare("SELECT userid FROM profiles"); $sth->execute(); while (my ($userid) = $sth->fetchrow_array()) { $dbh->do("INSERT INTO user_group_map (user_id, group_id, isbless, grant_type) VALUES ($userid, $id, 0, " . GRANT_DIRECT . ")"); } } # Create bz_canusewhineatothers and bz_canusewhines if (!GroupDoesExist('bz_canusewhines')) { my $whine_group = AddGroup('bz_canusewhines', 'User can configure whine reports for self'); my $whineatothers_group = AddGroup('bz_canusewhineatothers', 'Can configure whine reports for ' . 'other users'); my $group_exists = $dbh->selectrow_array( q{SELECT 1 FROM group_group_map WHERE member_id = ? AND grantor_id = ? AND grant_type = ?}, undef, $whineatothers_group, $whine_group, GROUP_MEMBERSHIP); $dbh->do("INSERT INTO group_group_map " . "(member_id, grantor_id, grant_type) " . "VALUES (${whineatothers_group}, ${whine_group}, " . GROUP_MEMBERSHIP . ")") unless $group_exists; } # 2005-08-14 bugreport@peshkin.net -- Bug 304583 use constant GRANT_DERIVED => 1; # Get rid of leftover DERIVED group permissions $dbh->do("DELETE FROM user_group_map WHERE grant_type = " . GRANT_DERIVED); # Evaluate regexp-based group memberships $sth = $dbh->prepare("SELECT profiles.userid, profiles.login_name, groups.id, groups.userregexp, user_group_map.group_id FROM profiles CROSS JOIN groups LEFT JOIN user_group_map ON user_group_map.user_id = profiles.userid AND user_group_map.group_id = groups.id AND user_group_map.grant_type = ? WHERE (userregexp != '' OR user_group_map.group_id IS NOT NULL)"); my $sth_add = $dbh->prepare("INSERT INTO user_group_map (user_id, group_id, isbless, grant_type) VALUES(?, ?, 0, " . GRANT_REGEXP . ")"); my $sth_del = $dbh->prepare("DELETE FROM user_group_map WHERE user_id = ? AND group_id = ? AND isbless = 0 AND grant_type = " . GRANT_REGEXP); $sth->execute(GRANT_REGEXP); while (my ($uid, $login, $gid, $rexp, $present) = $sth->fetchrow_array()) { if ($login =~ m/$rexp/i) { $sth_add->execute($uid, $gid) unless $present; } else { $sth_del->execute($uid, $gid) if $present; } } ########################################################################### # Create --SETTINGS-- users can adjust ########################################################################### # 2005-03-03 travis@sedsystems.ca -- Bug 41972 add_setting ("display_quips", {"on" => 1, "off" => 2 }, "on" ); # 2005-03-10 travis@sedsystems.ca -- Bug 199048 add_setting ("comment_sort_order", {"oldest_to_newest" => 1, "newest_to_oldest" => 2, "newest_to_oldest_desc_first" => 3}, "oldest_to_newest" ); # 2005-05-12 bugzilla@glob.com.au -- Bug 63536 add_setting ("post_bug_submit_action", {"next_bug" => 1, "same_bug" => 2, "nothing" => 3, }, "next_bug" ); # 2005-06-29 wurblzap@gmail.com -- Bug 257767 add_setting ('csv_colsepchar', {',' => 1, ';' => 2 }, ',' ); ########################################################################### # Create Administrator --ADMIN-- ########################################################################### sub bailout { # this is just in case we get interrupted while getting passwd if ($^O !~ /MSWin32/i) { system("stty","echo"); # re-enable input echoing } exit 1; } if (@admins) { # Identify admin group. my $sth = $dbh->prepare("SELECT id FROM groups WHERE name = 'admin'"); $sth->execute(); my ($adminid) = $sth->fetchrow_array(); foreach my $userid (@admins) { $dbh->do("INSERT INTO user_group_map (user_id, group_id, isbless, grant_type) VALUES ($userid, $adminid, 0, " . GRANT_DIRECT . ")"); # Existing administrators are made blessers of group "admin" # but only explicitly defined blessers can bless group admin. # Other groups can be blessed by any admin (by default) or additional # defined blessers. $dbh->do("INSERT INTO user_group_map (user_id, group_id, isbless, grant_type) VALUES ($userid, $adminid, 1, " . GRANT_DIRECT . ")"); } $sth = $dbh->prepare("SELECT id FROM groups"); $sth->execute(); while ( my ($id) = $sth->fetchrow_array() ) { # Admins can bless every group. $dbh->do("INSERT INTO group_group_map (member_id, grantor_id, grant_type) VALUES ($adminid, $id," . GROUP_BLESS . ")"); # Admins can see every group. $dbh->do("INSERT INTO group_group_map (member_id, grantor_id, grant_type) VALUES ($adminid, $id," . GROUP_VISIBLE . ")"); # Admins are initially members of every group. next if ($id == $adminid); $dbh->do("INSERT INTO group_group_map (member_id, grantor_id, grant_type) VALUES ($adminid, $id," . GROUP_MEMBERSHIP . ")"); } } my @groups = (); $sth = $dbh->prepare("SELECT id FROM groups"); $sth->execute(); while ( my @row = $sth->fetchrow_array() ) { push (@groups, $row[0]); } # Prompt the user for the email address and name of an administrator. Create # that login, if it doesn't exist already, and make it a member of all groups. $sth = $dbh->prepare("SELECT user_id FROM groups INNER JOIN user_group_map " . "ON id = group_id WHERE name = 'admin'"); $sth->execute; # when we have no admin users, prompt for admin email address and password ... if ($sth->rows == 0) { my $login = ""; my $realname = ""; my $pass1 = ""; my $pass2 = "*"; my $admin_ok = 0; my $admin_create = 1; my $mailcheckexp = ""; my $mailcheck = ""; # Here we look to see what the emailregexp is set to so we can # check the email addy they enter. Bug 96675. If they have no # params (likely but not always the case), we use the default. if (-e "$datadir/params") { require "$datadir/params"; # if they have a params file, use that } if (Param('emailregexp')) { $mailcheckexp = Param('emailregexp'); $mailcheck = Param('emailregexpdesc'); } else { $mailcheckexp = '^[\\w\\.\\+\\-=]+@[\\w\\.\\-]+\\.[\\w\\-]+$'; $mailcheck = 'A legal address must contain exactly one \'@\', and at least one \'.\' after the @.'; } print "\nLooks like we don't have an administrator set up yet.\n"; print "Either this is your first time using Bugzilla, or your\n "; print "administrator's privileges might have accidentally been deleted.\n"; while(! $admin_ok ) { while( $login eq "" ) { print "Enter the e-mail address of the administrator: "; $login = $answer{'ADMIN_EMAIL'} || ($silent && die("cant preload ADMIN_EMAIL")) || ; chomp $login; if(! $login ) { print "\nYou DO want an administrator, don't you?\n"; } unless ($login =~ /$mailcheckexp/) { print "\nThe login address is invalid:\n"; print "$mailcheck\n"; print "You can change this test on the params page once checksetup has successfully\n"; print "completed.\n\n"; # Go round, and ask them again $login = ""; } } $sth = $dbh->prepare("SELECT login_name FROM profiles " . "WHERE " . $dbh->sql_istrcmp('login_name', '?')); $sth->execute($login); if ($sth->rows > 0) { print "$login already has an account.\n"; print "Make this user the administrator? [Y/n] "; my $ok = $answer{'ADMIN_OK'} || ($silent && die("cant preload ADMIN_OK")) || ; chomp $ok; if ($ok !~ /^n/i) { $admin_ok = 1; $admin_create = 0; } else { print "OK, well, someone has to be the administrator.\n"; print "Try someone else.\n"; $login = ""; } } else { print "You entered $login. Is this correct? [Y/n] "; my $ok = $answer{'ADMIN_OK'} || ($silent && die("cant preload ADMIN_OK")) || ; chomp $ok; if ($ok !~ /^n/i) { $admin_ok = 1; } else { print "That's okay, typos happen. Give it another shot.\n"; $login = ""; } } } if ($admin_create) { require Bugzilla::Util; import Bugzilla::Util 'is_7bit_clean'; while( $realname eq "" ) { print "Enter the real name of the administrator: "; $realname = $answer{'ADMIN_REALNAME'} || ($silent && die("cant preload ADMIN_REALNAME")) || ; chomp $realname; if(! $realname ) { print "\nReally. We need a full name.\n"; } if(! is_7bit_clean($realname)) { print "\nSorry, but at this stage the real name can only " . "contain standard English\ncharacters. Once Bugzilla " . "has been installed, you can use the 'Prefs' page\nto " . "update the real name.\n"; $realname = ''; } } # trap a few interrupts so we can fix the echo if we get aborted. $SIG{HUP} = \&bailout; $SIG{INT} = \&bailout; $SIG{QUIT} = \&bailout; $SIG{TERM} = \&bailout; if ($^O !~ /MSWin32/i) { system("stty","-echo"); # disable input echoing } while( $pass1 ne $pass2 ) { while( $pass1 eq "" || $pass1 !~ /^[[:print:]]{3,16}$/ ) { print "Enter a password for the administrator account: "; $pass1 = $answer{'ADMIN_PASSWORD'} || ($silent && die("cant preload ADMIN_PASSWORD")) || ; chomp $pass1; if(! $pass1 ) { print "\n\nAn empty password is a security risk. Try again!\n"; } elsif ( $pass1 !~ /^.{3,16}$/ ) { print "\n\nThe password must be 3-16 characters in length.\n"; } elsif ( $pass1 !~ /^[[:print:]]{3,16}$/ ) { print "\n\nThe password contains non-printable characters.\n"; } } print "\nPlease retype the password to verify: "; $pass2 = $answer{'ADMIN_PASSWORD'} || ($silent && die("cant preload ADMIN_PASSWORD")) || ; chomp $pass2; if ($pass1 ne $pass2) { print "\n\nPasswords don't match. Try again!\n"; $pass1 = ""; $pass2 = "*"; } } # Crypt the administrator's password my $cryptedpassword = bz_crypt($pass1); if ($^O !~ /MSWin32/i) { system("stty","echo"); # re-enable input echoing } $SIG{HUP} = 'DEFAULT'; # and remove our interrupt hooks $SIG{INT} = 'DEFAULT'; $SIG{QUIT} = 'DEFAULT'; $SIG{TERM} = 'DEFAULT'; $dbh->do( q{INSERT INTO profiles (login_name, realname, cryptpassword, disabledtext, refreshed_when) VALUES (?, ?, ?, ?, ?)}, undef, $login, $realname, $cryptedpassword, '', '1900-01-01 00:00:00'); } # Put the admin in each group if not already my $userid = $dbh->selectrow_array("SELECT userid FROM profiles WHERE " . $dbh->sql_istrcmp('login_name', '?'), undef, $login); # Admins get explicit membership and bless capability for the admin group my ($admingroupid) = $dbh->selectrow_array("SELECT id FROM groups WHERE name = 'admin'"); $dbh->do("INSERT INTO user_group_map (user_id, group_id, isbless, grant_type) VALUES ($userid, $admingroupid, 0, " . GRANT_DIRECT . ")"); $dbh->do("INSERT INTO user_group_map (user_id, group_id, isbless, grant_type) VALUES ($userid, $admingroupid, 1, " . GRANT_DIRECT . ")"); # Admins get inherited membership and bless capability for all groups foreach my $group ( @groups ) { $dbh->do("INSERT INTO group_group_map (member_id, grantor_id, grant_type) VALUES ($admingroupid, $group, " . GROUP_MEMBERSHIP . ")"); $dbh->do("INSERT INTO group_group_map (member_id, grantor_id, grant_type) VALUES ($admingroupid, $group, " . GROUP_BLESS . ")"); } print "\n$login is now set up as an administrator account.\n"; } # # Final checks... $sth = $dbh->prepare("SELECT user_id " . "FROM groups INNER JOIN user_group_map " . "ON groups.id = user_group_map.group_id " . "WHERE groups.name = 'admin'"); $sth->execute; my ($adminuid) = $sth->fetchrow_array; if (!$adminuid) { die "No administrator!" } # should never get here # when test product was created, admin was unknown $dbh->do("UPDATE components " . "SET initialowner = $adminuid " . "WHERE initialowner = 0"); unlink "$datadir/versioncache"; ################################################################################