# This Source Code Form is subject to the terms of the Mozilla Public # License, v. 2.0. If a copy of the MPL was not distributed with this # file, You can obtain one at http://mozilla.org/MPL/2.0/. # # This Source Code Form is "Incompatible With Secondary Licenses", as # defined by the Mozilla Public License, v. 2.0. # This file contains a single hash named %strings, which is used by the # installation code to display strings before Template-Toolkit can safely # be loaded. # # Each string supports a very simple substitution system, where you can # have variables named like ##this## and they'll be replaced by the string # variable with that name. # # Please keep the strings in alphabetical order by their name. %strings = ( all_optional_features_require => 'All optional features above require the following modules to be found:', any => 'any', apachectl_failed => < 'not a valid executable: ##bin##', blacklisted => '(blacklisted)', bz_schema_exists_before_220 => <<'END', You are upgrading from a version before 2.20, but the bz_schema table already exists. This means that you restored a mysqldump into the Bugzilla database without first dropping the already-existing Bugzilla database, at some point. Whenever you restore a Bugzilla database backup, you must always drop the entire database first. Please drop your Bugzilla database and restore it from a backup that does not contain the bz_schema table. If for some reason you cannot do this, you can connect to your MySQL database and drop the bz_schema table, as a last resort. END checking_for => 'Checking for', chmod_failed => '##path##: Failed to change permissions: ##error##', chown_failed => '##path##: Failed to change ownership: ##error##', commands_dbd => < 'COMMANDS TO INSTALL OPTIONAL MODULES:', commands_required => < <<'END', Re-run checksetup.pl in interactive mode (without an 'answers' file) to continue. END cpanfile_created => "##file## created", cpan_bugzilla_home => "WARNING: Using the Bugzilla directory as the CPAN home.", db_enum_setup => "Setting up choices for standard drop-down fields:", db_schema_init => "Initializing bz_schema...", db_table_new => "Adding new table ##table##...", db_table_setup => "Creating tables...", done => 'done.', enter_or_ctrl_c => "Press Enter to continue or Ctrl-C to exit...", error_localconfig_read => <<'END', An error has occurred while reading the ##localconfig## file. The text of the error message is: ##error## Please fix the error in the localconfig file. Alternately, rename your localconfig file and re-run checksetup.pl to have it create a new localconfig file: $ mv -f localconfig localconfig.old $ ./checksetup.pl END extension_must_return_name => <1 or a number. See the documentation of Bugzilla::Extension for details. END file_remove => 'Removing ##name##...', file_rename => 'Renaming ##from## to ##to##...', header => "* This is Bugzilla ##bz_ver## on perl ##perl_ver##\n" . "* Running on ##os_name## ##os_ver##", installation_failed => '*** Installation aborted. Read the messages above. ***', install_data_too_long => < <<'END', This version of Bugzilla contains some variables that you may want to change and adapt to your local settings. The following variables are new to ##localconfig## since you last ran checksetup.pl: ##new_vars## Please edit the file ##localconfig## and then re-run checksetup.pl to complete your installation. END lc_old_vars => <<'END', The following variables are no longer used in ##localconfig##, and have been moved to ##old_file##: ##vars## END localconfig_attachment_base => <<'END', When the runtime allow_attachment_display parameter is on, it is possible for a malicious attachment to steal your cookies or perform an attack using your credentials. If you would like additional security on attachments to avoid this, set this parameter to an alternate URL for your $terms.Bugzilla that is not the same as urlbase. That is, a different domain name that resolves to this exact same installation. For added security, you can insert %bugid% into the URL, which will be replaced with the ID of the current bug that the attachment is on, when you access an attachment. This will limit attachments to accessing only other attachments on the same bug. Remember, though, that all those possible domain names must point to this same instance. END localconfig_create_htaccess => <<'END', If you are using Apache as your web server, Bugzilla can create .htaccess files for you, which will keep this file (localconfig) and other confidential files from being read over the web. If this is set to 1, checksetup.pl will create .htaccess files if they don't exist. If this is set to 0, checksetup.pl will not create .htaccess files. END localconfig_cvsbin => <<'END', If you want to use the CVS integration of the Patch Viewer, please specify the full path to the "cvs" executable here. END localconfig_db_check => <<'END', Should checksetup.pl try to verify that your database setup is correct? With some combinations of database servers/Perl modules/moonphase this doesn't work, and so you can try setting this to 0 to make checksetup.pl run. END localconfig_db_driver => <<'END', What SQL database to use. Default is mysql. List of supported databases can be obtained by listing Bugzilla/DB directory - every module corresponds to one supported database and the name of the module (before ".pm") corresponds to a valid value for this variable. END localconfig_db_host => <<'END', The DNS name or IP address of the host that the database server runs on. END localconfig_db_name => <<'END', The name of the database. For Oracle, this is the database's SID. For SQLite, this is a name (or path) for the DB file. END localconfig_db_pass => <<'END', Enter your database password here. It's normally advisable to specify a password for your bugzilla database user. If you use apostrophe (') or a backslash (\) in your password, you'll need to escape it by preceding it with a '\' character. (\') or (\) (It is far simpler to just not use those characters.) END localconfig_db_port => <<'END', Sometimes the database server is running on a non-standard port. If that's the case for your database server, set this to the port number that your database server is running on. Setting this to 0 means "use the default port for my database server." END localconfig_db_sock => <<'END', MySQL Only: Enter a path to the unix socket for MySQL. If this is blank, then MySQL's compiled-in default will be used. You probably want that. END localconfig_db_user => "Who we connect to the database as.", localconfig_diffpath => <<'END', For the "Difference Between Two Patches" feature to work, we need to know what directory the "diff" bin is in. (You only need to set this if you are using that feature of the Patch Viewer.) END localconfig_inbound_proxies => <<'END', This is a list of IP addresses that we expect proxies to come from. This can be '*' if only the load balancer can connect. Setting this to '*' means that we can trust the X-Forwarded-For header. END localconfig_index_html => <<'END', Most web servers will allow you to use index.cgi as a directory index, and many come preconfigured that way, but if yours doesn't then you'll need an index.html file that provides redirection to index.cgi. Setting $index_html to 1 below will allow checksetup.pl to create an index.html for you if it doesn't exist. NOTE: checksetup.pl will not replace an existing file, so if you wish to have checksetup.pl create one for you, you must make sure that index.html doesn't already exist. END localconfig_interdiffbin => <<'END', If you want to use the "Difference Between Two Patches" feature of the Patch Viewer, please specify the full path to the "interdiff" executable here. END localconfig_memcached_servers => <<'END', If this option is set, Bugzilla will integrate with Memcached. Specify one or more servers, separated by spaces, using hostname:port notation (for example: 127.0.0.1:11211). END localconfig_memcached_namespace => <<'END', Specify a string to prefix each key on Memcached. END localconfig_ses_username => <<'END', Username for HTTP Basic Authentication in front of the SES bounce handler. END localconfig_ses_password => <<'END', Password for HTTP Basic Authentication in front of the SES bounce handler. END localconfig_site_wide_secret => <<'END', This secret key is used by your installation for the creation and validation of encrypted tokens. These tokens are used to implement security features in Bugzilla, to protect against certain types of attacks. A random string is generated by default. It's very important that this key is kept secret. It also must be very long. END localconfig_param_override => <<'END', This hash is used by BMO to override select data/params values on a per-webhead basis. Keys set to undef will default to the value in data/params. Only the keys listed below can be overridden. END localconfig_urlbase => <<'END', The URL that is the common initial leading part of all URLs. END localconfig_use_suexec => <<'END', Set this to 1 if Bugzilla runs in an Apache SuexecUserGroup environment. If your web server runs control panel software (cPanel, Plesk or similar), or if your Bugzilla is to run in a shared hosting environment, then you are almost certainly in an Apache SuexecUserGroup environment. If this is a Windows box, ignore this setting, as it does nothing. If set to 0, checksetup.pl will set file permissions appropriately for a normal webserver environment. If set to 1, checksetup.pl will set file permissions so that Bugzilla works in a SuexecUserGroup environment. END localconfig_webservergroup => <<'END', The name of the group that your web server runs as. On Red Hat distributions, this is usually "apache". On Debian/Ubuntu, it is usually "www-data". If you have use_suexec turned on below, then this is instead the name of the group that your web server switches to to run cgi files. If this is a Windows machine, ignore this setting, as it does nothing. If you do not have access to the group your scripts will run under, set this to "". If you do set this to "", then your Bugzilla installation will be _VERY_ insecure, because some files will be world readable/writable, and so anyone who can get local access to your machine can do whatever they want. You should only have this set to "" if this is a testing installation and you cannot set this up any other way. YOU HAVE BEEN WARNED! If you set this to anything other than "", you will need to run checksetup.pl as ##root## or as a user who is a member of the specified group. END localconfig_apache_size_limit => < < < < "Minimum version required: ", # Note: When translating these "modules" messages, don't change the formatting # if possible, because there is hardcoded formatting in # Bugzilla::Install::Requirements to match the box formatting. modules_message_apache => < < < < "found v##ver##", module_not_found => "not found", module_ok => 'ok', module_unknown_version => "found unknown version", no_such_module => "There is no Perl module on CPAN named ##module##.", mysql_innodb_disabled => <<'END', InnoDB is disabled in your MySQL installation. Bugzilla requires InnoDB to be enabled. Please enable it and then re-run checksetup.pl. END mysql_index_renaming => <<'END', We are about to rename old indexes. The estimated time to complete renaming is ##minutes## minutes. You cannot interrupt this action once it has begun. If you would like to cancel, press Ctrl-C now... (Waiting 45 seconds...) END mysql_utf8_conversion => <<'END', WARNING: We are about to convert your table storage format to UTF-8. This allows Bugzilla to correctly store and sort international characters. However, if you have any non-UTF-8 data in your database, it ***WILL BE DELETED*** by this process. So, before you continue with checksetup.pl, if you have any non-UTF-8 data (or even if you're not sure) you should press Ctrl-C now to interrupt checksetup.pl, and run contrib/recode.pl to make all the data in your database into UTF-8. You should also back up your database before continuing. This will affect every single table in the database, even non-Bugzilla tables. If you ever used a version of Bugzilla before 2.22, we STRONGLY recommend that you stop checksetup.pl NOW and run contrib/recode.pl. END no_checksetup_from_cgi => < checksetup.pl cannot run from a web browser

checksetup.pl cannot run from a web browser

You must not execute this script from your web browser. To install or upgrade Bugzilla, run this script from the command-line (e.g. bash or ssh on Linux or cmd.exe on Windows), and follow instructions given there.

For more information on how to install Bugzilla, please read the documentation available on the official Bugzilla website.

END patchutils_missing => <<'END', OPTIONAL NOTE: If you want to be able to use the 'difference between two patches' feature of Bugzilla (which requires the PatchReader Perl module as well), you should install patchutils from: http://cyberelk.net/tim/patchutils/ END template_precompile => "Precompiling templates...", template_removal_failed => < "Removing existing compiled templates...", update_cf_invalid_name => "Removing custom field '##field##', because it has an invalid name...", update_flags_bad_name => <<'END', "##flag##" is not a valid name for a flag. Rename it to not have any spaces or commas. END update_nomail_bad => <<'END', WARNING: The following users were listed in ##data##/nomail, but do not have an account here. The unmatched entries have been moved to ##data##/nomail.bad: END update_summary_truncate_comment => "The original value of the Summary field was longer than 255" . " characters, and so it was truncated during an upgrade." . " The original summary was:\n\n##summary##", update_summary_truncated => <<'END', WARNING: Some of your bugs had summaries longer than 255 characters. They have had their original summary copied into a comment, and then the summary was truncated to 255 characters. The affected bug numbers were: END update_quips => <<'END', Quips are now stored in the database, rather than in an external file. The quips previously stored in ##data##/comments have been copied into the database, and that file has been renamed to ##data##/comments.bak You may delete the renamed file once you have confirmed that all your quips were moved successfully. END update_queries_to_tags => "Populating the new 'tag' table:", webdot_bad_htaccess => <