path: root/docs/en/xml/installation.xml

<?xml version="1.0"?>
<!-- This Source Code Form is subject to the terms of the Mozilla Public
     License, v. 2.0. If a copy of the MPL was not distributed with this
     file, You can obtain one at http://mozilla.org/MPL/2.0/.

     This Source Code Form is "Incompatible With Secondary Licenses", as
     defined by the Mozilla Public License, v. 2.0.
-->
<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
                      "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [
    <!ENTITY % myents SYSTEM "bugzilla.ent">
    %myents;
]>

<chapter id="installing-bugzilla">
  <title>Installing Bugzilla</title>

  <section id="installation">
    <title>Installation</title>

    <note>
      <para>If you just want to <emphasis>use</emphasis> Bugzilla, 
      you do not need to install it. None of this chapter is relevant to
      you. Ask your Bugzilla administrator for the URL to access it from
      your web browser.
      </para>
    </note>

    <para>The Bugzilla server software is usually installed on Linux or 
    Solaris. 
    If you are installing on another OS, check <xref linkend="os-specific"/>
    before you start your installation to see if there are any special
    instructions.
    </para>

    <para>This guide assumes that you have administrative access to the
    Bugzilla machine. It not possible to
    install and run Bugzilla itself without administrative access except
    in the very unlikely event that every single prerequisite is
    already installed.
    </para>

    <warning>
      <para>The installation process may make your machine insecure for
      short periods of time. Make sure there is a firewall between you
      and the Internet.
      </para>
    </warning>

    <para>
    You are strongly recommended to make a backup of your system
    before installing Bugzilla (and at regular intervals thereafter :-).
    </para>

    <para>In outline, the installation proceeds as follows:
    </para>

    <procedure>
      <step>
        <para><link linkend="install-perl">Install Perl</link>
        (&min-perl-ver; or above)
        </para>
      </step>
      <step>
        <para><link linkend="install-database">Install a Database Engine</link>
        </para>
      </step>
      <step>
        <para><link linkend="install-webserver">Install a Webserver</link>
        </para>
      </step>
      <step>
        <para><link linkend="install-bzfiles">Install Bugzilla</link>
        </para>
      </step>
      <step>
        <para><link linkend="install-perlmodules">Install Perl modules</link>
        </para>
      </step>
      <step>
        <para>
          <link linkend="install-MTA">Install a Mail Transfer Agent</link>
          (Sendmail 8.7 or above, or an MTA that is Sendmail-compatible with at least this version)
        </para>
      </step>
      <step>
        <para>Configure all of the above.
        </para>
      </step>
    </procedure>

    <section id="install-perl">
      <title>Perl</title>

      <para>Installed Version Test: <programlisting>perl -v</programlisting></para>
      
      <para>Any machine that doesn't have Perl on it is a sad machine indeed.
      If you don't have it and your OS doesn't provide official packages, 
      visit <ulink url="http://www.perl.org"/>.
      Although Bugzilla runs with Perl &min-perl-ver;,
      it's a good idea to be using the latest stable version.
      </para>
    </section>

    <section id="install-database">
      <title>Database Engine</title>
      
      <para>
        Bugzilla supports MySQL, PostgreSQL and Oracle as database servers.
        You only require one of these systems to make use of Bugzilla.
      </para>

      <section id="install-mysql">
          <title>MySQL</title>
          <para>Installed Version Test: <programlisting>mysql -V</programlisting></para>
      
          <para>
          If you don't have it and your OS doesn't provide official packages, 
          visit <ulink url="http://www.mysql.com"/>. You need MySQL version
          &min-mysql-ver; or higher.
          </para>
      
          <note>
            <para> Many of the binary
            versions of MySQL store their data files in 
            <filename class="directory">/var</filename>.
            On some Unix systems, this is part of a smaller root partition,
            and may not have room for your bug database. To change the data
            directory, you have to build MySQL from source yourself, and
            set it as an option to <filename>configure</filename>.</para>
          </note> 
           
          <para>If you install from something other than a packaging/installation
          system, such as .rpm (RPM Package Manager), .deb (Debian Package), .exe
          (Windows Executable), or .msi (Windows Installer), make sure the MySQL
          server is started when the machine boots.
          </para>
      </section>
      
      <section id="install-pg">
          <title>PostgreSQL</title>
          <para>Installed Version Test: <programlisting>psql -V</programlisting></para>
      
          <para>
          If you don't have it and your OS doesn't provide official packages, 
          visit <ulink url="http://www.postgresql.org/"/>. You need PostgreSQL
          version &min-pg-ver; or higher.
          </para>
           
          <para>If you install from something other than a packaging/installation
          system, such as .rpm (RPM Package Manager), .deb (Debian Package), .exe
          (Windows Executable), or .msi (Windows Installer), make sure the
          PostgreSQL server is started when the machine boots.
          </para>
      </section>

      <section id="install-oracle">
        <title>Oracle</title>
        <para>
          Installed Version Test: <programlisting>select * from v$version</programlisting>
          (you first have to log in into your DB)
        </para>

        <para>
          If you don't have it and your OS doesn't provide official packages,
          visit <ulink url="http://www.oracle.com/"/>. You need Oracle
          version &min-oracle-ver; or higher.
        </para>

        <para>
          If you install from something other than a packaging/installation
          system, such as .rpm (RPM Package Manager), .deb (Debian Package), .exe
          (Windows Executable), or .msi (Windows Installer), make sure the
          Oracle server is started when the machine boots.
        </para>
      </section>
    </section>
    
    <section id="install-webserver">
      <title>Web Server</title>

      <para>Installed Version Test: view the default welcome page at
      http://&lt;your-machine&gt;/</para>
      
      <para>
        You have freedom of choice here, pretty much any web server that
        is capable of running <glossterm linkend="gloss-cgi">CGI</glossterm>
        scripts will work.
        However, we strongly recommend using the Apache web server
        (either 1.3.x or 2.x), and the installation instructions usually assume
        you are using it. If you have got Bugzilla working using another web server,
        please share your experiences with us by filing a bug in
        <ulink url="&bzg-bugs;">Bugzilla Documentation</ulink>.
      </para>

      <para>
      If you don't have Apache and your OS doesn't provide official packages, 
      visit <ulink url="http://httpd.apache.org/"/>.
      </para>

    </section>

    <section id="install-bzfiles">
      <title>Bugzilla</title>

      <para>
        <ulink url="http://www.bugzilla.org/download/">Download a Bugzilla tarball</ulink>
        (or <ulink url="https://wiki.mozilla.org/Bugzilla:Bzr">check it out from Bzr</ulink>)
        and place it in a suitable directory, accessible by the default web server user
        (probably <quote>apache</quote> or <quote>www</quote>). 
        Good locations are either directly in the web server's document directories or
        in <filename>/usr/local</filename> with a symbolic link to the web server's 
        document directories or an alias in the web server's configuration.
      </para>

      <caution>
        <para>The default Bugzilla distribution is NOT designed to be placed
        in a <filename class="directory">cgi-bin</filename> directory. This
        includes any directory which is configured using the
        <option>ScriptAlias</option> directive of Apache.
        </para>
      </caution>
      
      <para>Once all the files are in a web accessible directory, make that
      directory writable by your web server's user. This is a temporary step
      until you run the 
      <filename>checksetup.pl</filename>
      script, which locks down your installation.</para>
    </section>

    <section id="install-perlmodules">
      <title>Perl Modules</title>
      
      <para>Bugzilla's installation process is based
      on a script called <filename>checksetup.pl</filename>. 
      The first thing it checks is whether you have appropriate 
      versions of all the required
      Perl modules. The aim of this section is to pass this check. 
      When it passes, proceed to <xref linkend="configuration"/>.
      </para>
      
      <para>
      At this point, you need to <filename>su</filename> to root. You should
      remain as root until the end of the install. To check you have the
      required modules, run:
      </para>
      
      <screen><prompt>bash#</prompt> ./checksetup.pl --check-modules</screen>
 
      <para>
        <filename>checksetup.pl</filename> will print out a list of the
        required and optional Perl modules, together with the versions
        (if any) installed on your machine.
        The list of required modules is reasonably long; however, you 
        may already have several of them installed.
      </para>
      
      <para>
        The preferred way to install missing Perl modules is to use the package
        manager provided by your operating system (e.g <quote>rpm</quote> or
        <quote>yum</quote> on Linux distros, or <quote>ppm</quote> on Windows
        if using ActivePerl, see <xref linkend="win32-perl-modules"/>).
        If some Perl modules are still missing or are too old, then we recommend
        using the <filename>install-module.pl</filename> script (doesn't work
        with ActivePerl on Windows). If for some reason you really need to
        install the Perl modules manually, see
        <xref linkend="install-perlmodules-manual"/>. For instance, on Unix,
        you invoke <filename>install-module.pl</filename> as follows:
      </para>  
        
      <screen><prompt>bash#</prompt> perl install-module.pl &lt;modulename&gt;</screen>

      <tip>
        <para>Many people complain that Perl modules will not install for
        them. Most times, the error messages complain that they are missing a
        file in 
        <quote>@INC</quote>.
        Virtually every time, this error is due to permissions being set too
        restrictively for you to compile Perl modules or not having the
        necessary Perl development libraries installed on your system.
        Consult your local UNIX systems administrator for help solving these
        permissions issues; if you 
        <emphasis>are</emphasis>
        the local UNIX sysadmin, please consult the newsgroup/mailing list
        for further assistance or hire someone to help you out.</para>
      </tip>

      <note>
        <para>If you are using a package-based system, and attempting to install the
        Perl modules from CPAN, you may need to install the "development" packages for
        MySQL and GD before attempting to install the related Perl modules. The names of
        these packages will vary depending on the specific distribution you are using,
        but are often called <filename>&lt;packagename&gt;-devel</filename>.</para>
      </note>
 
      <para>
        Here is a complete list of modules and their minimum versions.
        Some modules have special installation notes, which follow.
      </para>

      <para>Required Perl modules:
      <orderedlist>

        <listitem>
          <para>
            CGI (&min-cgi-ver;)
          </para>
        </listitem>

        <listitem>
          <para>
            Date::Format (&min-date-format-ver;)
          </para>
        </listitem>
    
        <listitem>
          <para>
            DateTime (&min-datetime-ver;)
          </para>
        </listitem>

        <listitem>
          <para>
            DateTime::TimeZone (&min-datetime-timezone-ver;)
          </para>
        </listitem>

        <listitem>
          <para>
            DBI (&min-dbi-ver;)
          </para>
        </listitem>

        <listitem>
          <para>
            DBD::mysql (&min-dbd-mysql-ver;) if using MySQL
          </para>
        </listitem>
        
        <listitem>
          <para>
            DBD::Pg (&min-dbd-pg-ver;) if using PostgreSQL
          </para>
        </listitem>

        <listitem>
          <para>
            DBD::Oracle (&min-dbd-oracle-ver;) if using Oracle
          </para>
        </listitem>

        <listitem>
          <para>
            Digest::SHA (&min-digest-sha-ver;)
          </para>
        </listitem>

        <listitem>
          <para>
            Email::Send (&min-email-send-ver;)
          </para>
        </listitem>

        <listitem>
          <para>
            Email::MIME (&min-email-mime-ver;)
          </para>
        </listitem>

        <listitem>
          <para>
            Template (&min-template-ver;)
          </para>
        </listitem>

        <listitem>
          <para>
            URI (&min-uri-ver;)
          </para>
        </listitem>
      </orderedlist>

      Optional Perl modules:
      <orderedlist>
        <listitem>
          <para>
            GD (&min-gd-ver;) for bug charting
          </para>
        </listitem>

        <listitem>
          <para>
            Template::Plugin::GD::Image
            (&min-template-plugin-gd-image-ver;) for Graphical Reports
          </para>
        </listitem>

        <listitem>
          <para>
            Chart::Lines (&min-chart-lines-ver;) for bug charting
          </para>
        </listitem>

        <listitem>
          <para>
            GD::Graph (&min-gd-graph-ver;) for bug charting
          </para>
        </listitem>

        <listitem>
          <para>
            GD::Text (&min-gd-text-ver;) for bug charting
          </para>
        </listitem>

        <listitem>
          <para>
            XML::Twig (&min-xml-twig-ver;) for bug import/export
          </para>
        </listitem>

        <listitem>
          <para>
            MIME::Parser (&min-mime-parser-ver;) for bug import/export
          </para>
        </listitem>

        <listitem>
          <para>
            LWP::UserAgent
            (&min-lwp-useragent-ver;) for Automatic Update Notifications
          </para>
        </listitem>

        <listitem>
          <para>
            PatchReader (&min-patchreader-ver;) for pretty HTML view of patches
          </para>
        </listitem>

        <listitem>
          <para>
            Net::LDAP
            (&min-net-ldap-ver;) for LDAP Authentication
          </para>
        </listitem>

        <listitem>
          <para>
            Authen::SASL
            (&min-authen-sasl-ver;) for SASL Authentication
          </para>
        </listitem>

        <listitem>
          <para>
            Authen::Radius
            (&min-authen-radius-ver;) for RADIUS Authentication
          </para>
        </listitem>

        <listitem>
          <para>
            SOAP::Lite (&min-soap-lite-ver;) for the web service interface
          </para>
        </listitem>

        <listitem>
          <para>
            JSON::RPC
            (&min-json-rpc-ver;) for the JSON-RPC interface
          </para>
        </listitem>

        <listitem>
          <para>
            Test::Taint
            (&min-test-taint-ver;) for the web service interface
          </para>
        </listitem>

        <listitem>
          <para>
            HTML::Parser
            (&min-html-parser-ver;) for More HTML in Product/Group Descriptions
          </para>
        </listitem>

        <listitem>
          <para>
            HTML::Scrubber
            (&min-html-scrubber-ver;) for More HTML in Product/Group Descriptions
          </para>
        </listitem>

        <listitem>
          <para>
            Email::Reply
            (&min-email-reply-ver;) for Inbound Email
          </para>
        </listitem>

        <listitem>
          <para>
            TheSchwartz
            (&min-theschwartz-ver;) for Mail Queueing
          </para>
        </listitem>

        <listitem>
          <para>
            Daemon::Generic
            (&min-daemon-generic-ver;) for Mail Queueing
          </para>
        </listitem>

        <listitem>
          <para>
            mod_perl2
            (&min-mod_perl2-ver;) for mod_perl
          </para>
        </listitem>
      </orderedlist>
      </para>
    </section>

    <section id="install-MTA">
      <title>Mail Transfer Agent (MTA)</title>
    
      <para>
        Bugzilla is dependent on the availability of an e-mail system for its 
        user authentication and for other tasks.
      </para>

      <note>
        <para>
          This is not entirely true.  It is possible to completely disable 
          email sending, or to have Bugzilla store email messages in a 
          file instead of sending them.  However, this is mainly intended 
          for testing, as disabling or diverting email on a production 
          machine would mean that users could miss important events (such 
          as bug changes or the creation of new accounts).
        </para>

        <para>
          For more information, see the <quote>mail_delivery_method</quote> parameter
          in <xref linkend="parameters" />.
        </para>
      </note>
    
      <para>
        On Linux, any Sendmail-compatible MTA (Mail Transfer Agent) will 
        suffice.  Sendmail, Postfix, qmail and Exim are examples of common 
        MTAs. Sendmail is the original Unix MTA, but the others are easier to 
        configure, and therefore many people replace Sendmail with Postfix or 
        Exim. They are drop-in replacements, so Bugzilla will not 
        distinguish between them.
      </para>

      <para>
        If you are using Sendmail, version 8.7 or higher is required.
        If you are using a Sendmail-compatible MTA, it must be congruent with 
        at least version 8.7 of Sendmail.
      </para>

      <para>
        Consult the manual for the specific MTA you choose for detailed 
        installation instructions. Each of these programs will have their own 
        configuration files where you must configure certain parameters to 
        ensure that the mail is delivered properly. They are implemented 
        as services, and you should ensure that the MTA is in the auto-start 
        list of services for the machine.
      </para>

      <para>
        If a simple mail sent with the command-line 'mail' program 
        succeeds, then Bugzilla should also be fine.
      </para>

    </section>  
    <section id="using-mod_perl-with-bugzilla">
      <title>Installing Bugzilla on mod_perl</title>
      <para>It is now possible to run the Bugzilla software under <literal>mod_perl</literal> on
      Apache. <literal>mod_perl</literal> has some additional requirements to that of running
      Bugzilla under <literal>mod_cgi</literal> (the standard and previous way).</para>
      
      <para>Bugzilla requires <literal>mod_perl</literal> to be installed, which can be
      obtained from <ulink url="http://perl.apache.org"/> - Bugzilla requires
      version &min-mod_perl2-ver; (AKA 2.0.0-RC5) to be installed.</para>
    </section>
  </section>
  
  <section id="configuration">
    <title>Configuration</title>

    <warning>
      <para>
        Poorly-configured MySQL and Bugzilla installations have
        given attackers full access to systems in the past. Please take the
        security parts of these guidelines seriously, even for Bugzilla 
        machines hidden away behind your firewall. Be certain to read
        <xref linkend="security"/> for some important security tips.
      </para>      
    </warning>

    <section id="localconfig">
      <title>localconfig</title>
      
      <para>
        You should now run <filename>checksetup.pl</filename> again, this time
        without the <literal>--check-modules</literal> switch.
      </para>
      <screen><prompt>bash#</prompt> ./checksetup.pl</screen>
      <para>
        This time, <filename>checksetup.pl</filename> should tell you that all
        the correct modules are installed and will display a message about, and
        write out a  file called, <filename>localconfig</filename>. This file
        contains the default settings for a number of Bugzilla parameters.
      </para>
      
      <para>
        Load this file in your editor. The only two values you
        <emphasis>need</emphasis> to change are $db_driver and $db_pass,
        respectively the type of the database and the password for
        the user you will create for your database. Pick a strong
        password (for simplicity, it should not contain single quote
        characters) and put it here. $db_driver can be either 'mysql',
        'Pg', 'Oracle' or 'Sqlite'.
      </para>

      <note>
        <para>
          In Oracle, <literal>$db_name</literal> should actually be 
          the SID name of your database (e.g. "XE" if you are using Oracle XE).
        </para>
      </note>

      <para>
        You may need to change the value of 
        <emphasis>webservergroup</emphasis> if your web server does not 
        run in the "apache" group.  On Debian, for example, Apache runs in 
        the "www-data" group.  If you are going to run Bugzilla on a 
        machine where you do not have root access (such as on a shared web 
        hosting account), you will need to leave
        <emphasis>webservergroup</emphasis> empty, ignoring the warnings 
        that <filename>checksetup.pl</filename> will subsequently display 
        every time it is run.
      </para>
      
      <caution>
        <para>
          If you are using suexec, you should use your own primary group
          for <emphasis>webservergroup</emphasis> rather than leaving it
          empty, and see the additional directions in the suexec section
          <xref linkend="suexec" />.
        </para>
      </caution>

      <para>
        The other options in the <filename>localconfig</filename> file
        are documented by their accompanying comments. If you have a slightly
        non-standard database setup, you may wish to change one or more of
        the other "$db_*" parameters.
      </para>
    </section>
    
    <section id="database-engine">
      <title>Database Server</title>
      <para>
        This section deals with configuring your database server for use
        with Bugzilla. Currently, MySQL (<xref linkend="mysql"/>),
        PostgreSQL (<xref linkend="postgresql"/>), Oracle (<xref linkend="oracle"/>)
        and SQLite (<xref linkend="sqlite"/>) are available.
      </para>

      <section id="database-schema">
        <title>Bugzilla Database Schema</title>

        <para>
          The Bugzilla database schema is available at
          <ulink url="http://www.ravenbrook.com/project/p4dti/tool/cgi/bugzilla-schema/">Ravenbrook</ulink>.
          This very valuable tool can generate a written description of
          the Bugzilla database schema for any version of Bugzilla. It
          can also generate a diff between two versions to help someone
          see what has changed.
        </para>
      </section>

      <section id="mysql">
        <title>MySQL</title>

        <caution>
          <para>
            MySQL's default configuration is insecure.
            We highly recommend to run <filename>mysql_secure_installation</filename>
            on Linux or the MySQL installer on Windows, and follow the instructions.
            Important points to note are:
            <orderedlist>
              <listitem>
                <para>Be sure that the root account has a secure password set.</para>
              </listitem>
              <listitem>
                <para>Do not create an anonymous account, and if it exists, say "yes"
                to remove it.</para>
              </listitem>
              <listitem>
                <para>If your web server and MySQL server are on the same machine,
                you should disable the network access.</para>
              </listitem>
            </orderedlist>
          </para>
        </caution>
 
        <section id="mysql-max-allowed-packet">
          <title>Allow large attachments and many comments</title>
          
          <para>By default, MySQL will only allow you to insert things
          into the database that are smaller than 1MB. Attachments
          may be larger than this. Also, Bugzilla combines all comments
          on a single bug into one field for full-text searching, and the
          combination of all comments on a single bug could in some cases
          be larger than 1MB.</para>
          
          <para>To change MySQL's default, you need to edit your MySQL
          configuration file, which is usually <filename>/etc/my.cnf</filename>
          on Linux. We recommend that you allow at least 4MB packets by
          adding the "max_allowed_packet" parameter to your MySQL 
          configuration in the "[mysqld]" section, like this:</para>

          <screen>[mysqld]
# Allow packets up to 4MB
max_allowed_packet=4M
          </screen>
        </section>
        
        <section>
          <title>Allow small words in full-text indexes</title>

          <para>By default, words must be at least four characters in length
          in order to be indexed by MySQL's full-text indexes. This causes
          a lot of Bugzilla specific words to be missed, including "cc",
          "ftp" and "uri".</para>

          <para>MySQL can be configured to index those words by setting the
          ft_min_word_len param to the minimum size of the words to index.
          This can be done by modifying the <filename>/etc/my.cnf</filename>
          according to the example below:</para>

          <screen>[mysqld]
# Allow small words in full-text indexes
ft_min_word_len=2</screen>

          <para>Rebuilding the indexes can be done based on documentation found at
          <ulink url="http://www.mysql.com/doc/en/Fulltext_Fine-tuning.html"/>.
          </para>
        </section>
        
        <section id="install-setupdatabase-adduser">
          <title>Add a user to MySQL</title>

          <para>
            You need to add a new MySQL user for Bugzilla to use.
            (It's not safe to have Bugzilla use the MySQL root account.)
            The following instructions assume the defaults in
            <filename>localconfig</filename>; if you changed those,
            you need to modify the SQL command appropriately. You will
            need the <replaceable>$db_pass</replaceable> password you
            set in <filename>localconfig</filename> in 
            <xref linkend="localconfig"/>.
          </para>

          <para>
            We use an SQL <command>GRANT</command> command to create
            a <quote>bugs</quote> user. This also restricts the 
            <quote>bugs</quote>user to operations within a database
            called <quote>bugs</quote>, and only allows the account
            to connect from <quote>localhost</quote>. Modify it to
            reflect your setup if you will be connecting from another
            machine or as a different user.
          </para>
        
          <para>
            Run the <filename>mysql</filename> command-line client and enter:
          </para>

          <screen>
<prompt>mysql&gt;</prompt> GRANT SELECT, INSERT,
       UPDATE, DELETE, INDEX, ALTER, CREATE, LOCK TABLES,
       CREATE TEMPORARY TABLES, DROP, REFERENCES ON bugs.*
       TO bugs@localhost IDENTIFIED BY '<replaceable>$db_pass</replaceable>';
<prompt>mysql&gt;</prompt> FLUSH PRIVILEGES;
          </screen>
        </section>

        <section>
          <title>Permit attachments table to grow beyond 4GB</title>

          <para>
            By default, MySQL will limit the size of a table to 4GB.
            This limit is present even if the underlying filesystem
            has no such limit.  To set a higher limit, follow these
            instructions.
          </para>

          <para>
            After you have completed the rest of the installation (or at least the
            database setup parts), you should run the <filename>MySQL</filename>
            command-line client and enter the following, replacing <literal>$bugs_db</literal>
            with your Bugzilla database name (<emphasis>bugs</emphasis> by default):
          </para>

          <screen>
<prompt>mysql&gt;</prompt> use <replaceable>$bugs_db</replaceable>
<prompt>mysql&gt;</prompt> ALTER TABLE attachments
           AVG_ROW_LENGTH=1000000, MAX_ROWS=20000;
          </screen>

          <para>
            The above command will change the limit to 20GB. Mysql will have 
            to make a temporary copy of your entire table to do this. Ideally, 
            you should do this when your attachments table is still small. 
          </para>

          <note>
            <para>
              This does not affect Big Files, attachments that are stored directly
              on disk instead of in the database.
            </para>
          </note>
        </section>
      </section>
      
      <section id="postgresql">
        <title>PostgreSQL</title>
        <section>
          <title>Add a User to PostgreSQL</title>

          <para>You need to add a new user to PostgreSQL for the Bugzilla
          application to use when accessing the database. The following instructions
          assume the defaults in <filename>localconfig</filename>; if you
          changed those, you need to modify the commands appropriately. You will
          need the <replaceable>$db_pass</replaceable> password you
          set in <filename>localconfig</filename> in 
          <xref linkend="localconfig"/>.</para>

          <para>On most systems, to create the user in PostgreSQL, you will need to
          login as the root user, and then</para>

          <screen><prompt>bash#</prompt> su - postgres</screen>

          <para>As the postgres user, you then need to create a new user: </para>
            
          <screen><prompt>bash$</prompt> createuser -U postgres -dRSP bugs</screen>
 
          <para>When asked for a password, provide the password which will be set as
          <replaceable>$db_pass</replaceable> in <filename>localconfig</filename>.
          The created user will not be a superuser (-S) and will not be able to create
          new users (-R). He will only have the ability to create databases (-d).</para>
        </section>
        
        <section>
          <title>Configure PostgreSQL</title>

          <para>Now, you will need to edit <filename>pg_hba.conf</filename> which is
          usually located in <filename>/var/lib/pgsql/data/</filename>. In this file,
          you will need to add a new line to it as follows:</para>

          <para>
            <computeroutput>host   all    bugs   127.0.0.1    255.255.255.255  md5</computeroutput>
          </para>
          
          <para>This means that for TCP/IP (host) connections, allow connections from
          '127.0.0.1' to 'all' databases on this server from the 'bugs' user, and use
          password authentication (md5) for that user.</para>

          <para>Now, you will need to restart PostgreSQL, but you will need to fully
          stop and start the server rather than just restarting due to the possibility
          of a change to <filename>postgresql.conf</filename>. After the server has
          restarted, you will need to edit <filename>localconfig</filename>, finding
          the <literal>$db_driver</literal> variable and setting it to
          <literal>Pg</literal> and changing the password in <literal>$db_pass</literal>
          to the one you picked previously, while setting up the account.</para> 
        </section>
      </section>

      <section id="oracle">
        <title>Oracle</title>
        <section>
          <title>Create a New Tablespace</title>

          <para>
            You can use the existing tablespace or create a new one for Bugzilla.
            To create a new tablespace, run the following command:
          </para>

          <programlisting>
CREATE TABLESPACE bugs
DATAFILE '<replaceable>$path_to_datafile</replaceable>' SIZE 500M
AUTOEXTEND ON NEXT 30M MAXSIZE UNLIMITED
          </programlisting>

          <para>
            Here, the name of the tablespace is 'bugs', but you can
            choose another name. <replaceable>$path_to_datafile</replaceable> is
            the path to the file containing your database, for instance
            <filename>/u01/oradata/bugzilla.dbf</filename>.
            The initial size of the database file is set in this example to 500 Mb,
            with an increment of 30 Mb everytime we reach the size limit of the file.
          </para>
        </section>

        <section>
          <title>Add a User to Oracle</title>

          <para>
            The user name and password must match what you set in
            <filename>localconfig</filename> (<literal>$db_user</literal>
            and <literal>$db_pass</literal>, respectively). Here, we assume that
            the user name is 'bugs' and the tablespace name is the same
            as above. 
          </para>

          <programlisting>
CREATE USER bugs
IDENTIFIED BY "<replaceable>$db_pass</replaceable>"
DEFAULT TABLESPACE bugs
TEMPORARY TABLESPACE TEMP
PROFILE DEFAULT;
-- GRANT/REVOKE ROLE PRIVILEGES
GRANT CONNECT TO bugs;
GRANT RESOURCE TO bugs;
-- GRANT/REVOKE SYSTEM PRIVILEGES
GRANT UNLIMITED TABLESPACE TO bugs;
GRANT EXECUTE ON CTXSYS.CTX_DDL TO bugs;
          </programlisting>
        </section>

        <section>
          <title>Configure the Web Server</title>

          <para>
            If you use Apache, append these lines to <filename>httpd.conf</filename>
            to set ORACLE_HOME and LD_LIBRARY_PATH. For instance:
          </para>

          <programlisting>
SetEnv ORACLE_HOME /u01/app/oracle/product/10.2.0/
SetEnv LD_LIBRARY_PATH /u01/app/oracle/product/10.2.0/lib/
          </programlisting>

          <para>
            When this is done, restart your web server.
          </para>
        </section>
      </section>

      <section id="sqlite">
        <title>SQLite</title>

        <caution>
          <para>
            Due to SQLite's <ulink url="http://sqlite.org/faq.html#q5">concurrency
            limitations</ulink> we recommend SQLite only for small and development
            Bugzilla installations.
          </para>
        </caution>

        <para>
          No special configuration is required to run Bugzilla on SQLite.
          The database will be stored in <filename>data/db/$db_name</filename>,
          where <literal>$db_name</literal> is the database name defined
          in <filename>localconfig</filename>.
        </para>
      </section>
    </section>

    <section>
      <title>checksetup.pl</title>

      <para>
        Next, rerun <filename>checksetup.pl</filename>. It reconfirms
        that all the modules are present, and notices the altered 
        localconfig file, which it assumes you have edited to your
        satisfaction. It compiles the UI templates,
        connects to the database using the 'bugs'
        user you created and the password you defined, and creates the 
        'bugs' database and the tables therein. 
      </para>

      <para>
        After that, it asks for details of an administrator account. Bugzilla
        can have multiple administrators - you can create more later - but
        it needs one to start off with.
        Enter the email address of an administrator, his or her full name, 
        and a suitable Bugzilla password.
      </para>
      
      <para>
        <filename>checksetup.pl</filename> will then finish. You may rerun
        <filename>checksetup.pl</filename> at any time if you wish.
      </para>
    </section>


    <section id="http">
      <title>Web server</title>
      <para>
        Configure your web server according to the instructions in the
        appropriate section. (If it makes a difference in your choice,
        the Bugzilla Team recommends Apache.) To check whether your web server
	is correctly configured, try to access <filename>testagent.cgi</filename>
	from your web server. If "OK" is displayed, then your configuration
	is successful. Regardless of which web server
        you are using, however, ensure that sensitive information is
        not remotely available by properly applying the access controls in
        <xref linkend="security-webserver-access"/>. You can run
        <filename>testserver.pl</filename> to check if your web server serves
        Bugzilla files as expected.
      </para>

      <section id="http-apache">
        <title>Bugzilla using Apache</title>
        <para>You have two options for running Bugzilla under Apache - 
          <link linkend="http-apache-mod_cgi">mod_cgi</link> (the default) and
          <link linkend="http-apache-mod_perl">mod_perl</link> (new in Bugzilla
          2.23)
        </para>
        <section id="http-apache-mod_cgi">
            <title>Apache <productname>httpd</productname> with mod_cgi</title>
    
            <para>
            To configure your Apache web server to work with Bugzilla while using
            mod_cgi, do the following:
            </para>
            
            <procedure>
            <step>
                <para>
                Load <filename>httpd.conf</filename> in your editor.
                In Fedora and Red Hat Linux, this file is found in
                <filename class="directory">/etc/httpd/conf</filename>.
                </para>
            </step>
    
            <step>
                <para>
                Apache uses <computeroutput>&lt;Directory&gt;</computeroutput>
                directives to permit fine-grained permission setting. Add the
                following lines to a directive that applies to the location
                of your Bugzilla installation. (If such a section does not
                exist, you'll want to add one.) In this example, Bugzilla has
                been installed at 
                <filename class="directory">/var/www/html/bugzilla</filename>.
                </para>
    
                <programlisting>
&lt;Directory /var/www/html/bugzilla&gt;
AddHandler cgi-script .cgi
Options +ExecCGI
DirectoryIndex index.cgi index.html
AllowOverride Limit FileInfo Indexes Options
&lt;/Directory&gt;
                </programlisting>
    
                <para>
                These instructions: allow apache to run .cgi files found
                within the bugzilla directory; instructs the server to look
                for a file called <filename>index.cgi</filename> or, if not
                found, <filename>index.html</filename> if someone
                only types the directory name into the browser; and allows
                Bugzilla's <filename>.htaccess</filename> files to override
                some global permissions.
                </para>
    
                <note>
                <para>
                    It is possible to make these changes globally, or to the
                    directive controlling Bugzilla's parent directory (e.g.
                    <computeroutput>&lt;Directory /var/www/html/&gt;</computeroutput>).
                    Such changes would also apply to the Bugzilla directory...
                    but they would also apply to many other places where they
                    may or may not be appropriate. In most cases, including
                    this one, it is better to be as restrictive as possible
                    when granting extra access.
                </para>
                </note>

                <note>
                <para>
                    On Windows, you may have to also add the
                    <computeroutput>ScriptInterpreterSource Registry-Strict</computeroutput>
                    line, see <link linkend="win32-http">Windows specific notes</link>.
                </para>
                </note>
            </step>                    
    
            <step>
                <para>
                <filename>checksetup.pl</filename> can set tighter permissions
                on Bugzilla's files and directories if it knows what group the
                web server runs as. Find the <computeroutput>Group</computeroutput>
                line in <filename>httpd.conf</filename>, place the value found
                there in the <replaceable>$webservergroup</replaceable> variable
                in <filename>localconfig</filename>, then rerun
                <filename>checksetup.pl</filename>.
                </para>
            </step>

            <step>
                <para>
                Optional: If Bugzilla does not actually reside in the webspace
                directory, but instead has been symbolically linked there, you
                will need to add the following to the
                <computeroutput>Options</computeroutput> line of the Bugzilla 
                <computeroutput>&lt;Directory&gt;</computeroutput> directive
                (the same one as in the step above):
                </para>
    
                <programlisting>+FollowSymLinks</programlisting>
    
                <para>
                Without this directive, Apache will not follow symbolic links
                to places outside its own directory structure, and you will be
                unable to run Bugzilla.
                </para>
            </step>
            </procedure>
        </section>
        <section id="http-apache-mod_perl">
            <title>Apache <productname>httpd</productname> with mod_perl</title>
            
            <para>Some configuration is required to make Bugzilla work with Apache
            and mod_perl</para>
            
            <procedure>
            <step>
                <para>
                Load <filename>httpd.conf</filename> in your editor.
                In Fedora and Red Hat Linux, this file is found in
                <filename class="directory">/etc/httpd/conf</filename>.
                </para>
            </step>
            
            <step>
                <para>Add the following information to your httpd.conf file, substituting
                where appropriate with your own local paths.</para>
                
                <note>
                <para>This should be used instead of the &lt;Directory&gt; block
                shown above. This should also be above any other <literal>mod_perl</literal>
                directives within the <filename>httpd.conf</filename> and must be specified
                in the order as below.</para>
                </note>
                <warning>
                <para>You should also ensure that you have disabled <literal>KeepAlive</literal>
                support in your Apache install when utilizing Bugzilla under mod_perl</para>
                </warning> 

                <programlisting>
PerlSwitches -w -T
PerlConfigRequire /var/www/html/bugzilla/mod_perl.pl
                </programlisting>
            </step>
			
			<step>
				<para>
					<filename>checksetup.pl</filename> can set tighter permissions
					on Bugzilla's files and directories if it knows what group the
					web server runs as. Find the <computeroutput>Group</computeroutput>
					line in <filename>httpd.conf</filename>, place the value found
					there in the <replaceable>$webservergroup</replaceable> variable
					in <filename>localconfig</filename>, then rerun
					<filename>checksetup.pl</filename>.
				</para>
            </step>
            </procedure>
            
            <para>On restarting Apache, Bugzilla should now be running within the
            mod_perl environment. Please ensure you have run checksetup.pl to set
		    permissions before you restart Apache.</para>
        
            <note>
            <para>Please bear the following points in mind when looking at using 
                Bugzilla under mod_perl: 
            <itemizedlist>
                <listitem>
                <para>
                    mod_perl support in Bugzilla can take up a HUGE amount of RAM. You could be
                    looking at 30MB per httpd child, easily. Basically, you just need a lot of RAM.
                    The more RAM you can get, the better. mod_perl is basically trading RAM for
                    speed. At least 2GB total system RAM is recommended for running Bugzilla under
                    mod_perl.
                </para>
                </listitem>
                <listitem>
                <para>
                    Under mod_perl, you have to restart Apache if you make any manual change to
                    any Bugzilla file. You can't just reload--you have to actually 
					<emphasis>restart</emphasis> the server (as in make sure it stops and starts 
					again). You <emphasis>can</emphasis> change localconfig and the params file 
					manually, if you want, because those are re-read every time you load a page.
                </para>
                </listitem>
                <listitem>
                <para>
                    You must run in Apache's Prefork MPM (this is the default). The Worker MPM
                    may not work--we haven't tested Bugzilla's mod_perl support under threads.
					(And, in fact, we're fairly sure it <emphasis>won't</emphasis> work.)
                </para>
                </listitem>
                <listitem>
                <para>
                    Bugzilla generally expects to be the only mod_perl application running on
                    your entire server. It may or may not work if there are other applications also
                    running under mod_perl. It does try its best to play nice with other mod_perl
                    applications, but it still may have conflicts.
                </para>
                </listitem>
                <listitem>
                <para>
                    It is recommended that you have one Bugzilla instance running under mod_perl
                    on your server. Bugzilla has not been tested with more than one instance running.
                </para>
                </listitem>
            </itemizedlist>
            </para>
            </note>
        </section>
      </section>
      
      <section id="http-iis">
        <title>Microsoft <productname>Internet Information Services</productname></title>

        <para>
          If you are running Bugzilla on Windows and choose to use
          Microsoft's <productname>Internet Information Services</productname>
          or <productname>Personal Web Server</productname> you will need
          to perform a number of other configuration steps as explained below.
          You may also want to refer to the following Microsoft Knowledge
          Base articles: 
          <ulink url="http://support.microsoft.com/default.aspx?scid=kb;en-us;245225">245225</ulink> 
          <quote>HOW TO: Configure and Test a PERL Script with IIS 4.0,
          5.0, and 5.1</quote> (for <productname>Internet Information
          Services</productname>) and 
          <ulink url="http://support.microsoft.com/default.aspx?scid=kb;en-us;231998">231998</ulink>          
          <quote>HOW TO: FP2000: How to Use Perl with Microsoft Personal Web
          Server on Windows 95/98</quote> (for <productname>Personal Web
          Server</productname>).
        </para>

        <para>
          You will need to create a virtual directory for the Bugzilla
          install.  Put the Bugzilla files in a directory that is named
          something <emphasis>other</emphasis> than what you want your
          end-users accessing.  That is, if you want your users to access
          your Bugzilla installation through 
          <quote>http://&lt;yourdomainname&gt;/Bugzilla</quote>, then do
          <emphasis>not</emphasis> put your Bugzilla files in a directory
          named <quote>Bugzilla</quote>.  Instead, place them in a different
          location, and then use the IIS Administration tool to create a
          Virtual Directory named "Bugzilla" that acts as an alias for the
          actual location of the files.  When creating that virtual directory,
          make sure you add the <quote>Execute (such as ISAPI applications or
          CGI)</quote> access permission.
        </para>

        <para>
          You will also need to tell IIS how to handle Bugzilla's
          .cgi files. Using the IIS Administration tool again, open up
          the properties for the new virtual directory and select the
          Configuration option to access the Script Mappings. Create an
          entry mapping .cgi to:
        </para>

        <programlisting>
&lt;full path to perl.exe &gt;\perl.exe -x&lt;full path to Bugzilla&gt; -wT "%s" %s
        </programlisting>

        <para>
          For example:
        </para>

        <programlisting>
c:\perl\bin\perl.exe -xc:\bugzilla -wT "%s" %s
        </programlisting>

        <note>
          <para>
            The ActiveState install may have already created an entry for
            .pl files that is limited to <quote>GET,HEAD,POST</quote>. If
            so, this mapping should be <emphasis>removed</emphasis> as
            Bugzilla's .pl files are not designed to be run via a web server.
          </para>
        </note>

        <para>
          IIS will also need to know that the index.cgi should be treated
          as a default document.  On the Documents tab page of the virtual
          directory properties, you need to add index.cgi as a default
          document type.  If you  wish, you may remove the other default
          document types for this particular virtual directory, since Bugzilla 
          doesn't use any of them.
        </para>

        <para>
          Also, and this can't be stressed enough, make sure that files
          such as <filename>localconfig</filename> and your
          <filename class="directory">data</filename> directory are
          secured as described in <xref linkend="security-webserver-access"/>.
        </para>

      </section>

    </section>
    
    <section id="install-config-bugzilla">
      <title>Bugzilla</title>
      
      <para>
        Your Bugzilla should now be working. Access 
        <filename>http://&lt;your-bugzilla-server&gt;/</filename> - 
        you should see the Bugzilla
        front page. If not, consult the Troubleshooting section,
        <xref linkend="troubleshooting"/>.
      </para>

      <note>
        <para>
          The URL above may be incorrect if you installed Bugzilla into a 
          subdirectory or used a symbolic link from your web site root to 
          the Bugzilla directory.
        </para>
      </note>
      
      <para>
        Log in with the administrator account you defined in the last 
        <filename>checksetup.pl</filename> run. You should go through 
        the Parameters page and see if there are any you wish to change.
        They key parameters are documented in <xref linkend="parameters"/>;
        you should certainly alter 
        <command>maintainer</command> and <command>urlbase</command>; 
        you may also want to alter 
        <command>cookiepath</command> or <command>requirelogin</command>.
      </para>

      <para>
        Bugzilla has several optional features which require extra 
        configuration. You can read about those in
        <xref linkend="extraconfig"/>.
      </para>
    </section> 
  </section>

  <section id="extraconfig">
    <title>Optional Additional Configuration</title>

    <para>
      Bugzilla has a number of optional features. This section describes how
      to configure or enable them.
    </para>
    
    <section>
      <title>Bug Graphs</title>

      <para>If you have installed the necessary Perl modules you
      can start collecting statistics for the nifty Bugzilla 
      graphs.</para>

      <screen><prompt>bash#</prompt> <command>crontab -e</command></screen>

      <para>
        This should bring up the crontab file in your editor. 
        Add a cron entry like this to run 
        <filename>collectstats.pl</filename> 
        daily at 5 after midnight:
      </para>
      
      <programlisting>5 0 * * * cd &lt;your-bugzilla-directory&gt; &amp;&amp; ./collectstats.pl</programlisting>

      <para>
        After two days have passed you'll be able to view bug graphs from
        the Reports page.
      </para>

      <note>
        <para>
          Windows does not have 'cron', but it does have the Task
          Scheduler, which performs the same duties. There are also
          third-party tools that can be used to implement cron, such as
          <ulink url="http://www.nncron.ru/">nncron</ulink>.
        </para>
      </note>
    </section>

    <section id="installation-whining-cron">
      <title>The Whining Cron</title>

      <para>What good are
      bugs if they're not annoying? To help make them more so you
      can set up Bugzilla's automatic whining system to complain at engineers
      which leave their bugs in the CONFIRMED state without triaging them.
      </para>
      <para>
        This can be done by adding the following command as a daily
        crontab entry, in the same manner as explained above for bug
        graphs. This example runs it at 12.55am. 
      </para>

      <programlisting>55 0 * * * cd &lt;your-bugzilla-directory&gt; &amp;&amp; ./whineatnews.pl</programlisting>

      <note>
        <para>
          Windows does not have 'cron', but it does have the Task
          Scheduler, which performs the same duties. There are also
          third-party tools that can be used to implement cron, such as
          <ulink url="http://www.nncron.ru/">nncron</ulink>.
        </para>
      </note>
    </section>

    <section id="installation-whining">
      <title>Whining</title>

      <para>
        As of Bugzilla 2.20, users can configure Bugzilla to regularly annoy 
        them at regular intervals, by having Bugzilla execute saved searches
        at certain times and emailing the results to the user.  This is known
        as "Whining".  The process of configuring Whining is described 
        in <xref linkend="whining"/>, but for it to work a Perl script must be
        executed at regular intervals.
      </para>

      <para>
        This can be done by adding the following command as a daily
        crontab entry, in the same manner as explained above for bug
        graphs. This example runs it every 15 minutes. 
      </para>

      <programlisting>*/15 * * * * cd &lt;your-bugzilla-directory&gt; &amp;&amp; ./whine.pl</programlisting>

      <note>
        <para>
          Whines can be executed as often as every 15 minutes, so if you specify
          longer intervals between executions of whine.pl, some users may not 
          be whined at as often as they would expect.  Depending on the person,
          this can either be a very Good Thing or a very Bad Thing.
        </para>
      </note>

      <note>
        <para>
          Windows does not have 'cron', but it does have the Task
          Scheduler, which performs the same duties. There are also
          third-party tools that can be used to implement cron, such as
          <ulink url="http://www.nncron.ru/">nncron</ulink>.
        </para>
      </note>
    </section>
        
    <section id="apache-addtype">
      <title>Serving Alternate Formats with the right MIME type</title>

      <para>
        Some Bugzilla pages have alternate formats, other than just plain
        <acronym>HTML</acronym>. In particular, a few Bugzilla pages can 
        output their contents as either <acronym>XUL</acronym> (a special 
        Mozilla format, that looks like a program <acronym>GUI</acronym>) 
        or <acronym>RDF</acronym> (a type of structured <acronym>XML</acronym> 
        that can be read by various programs).
      </para>
      <para>
        In order for your users to see these pages correctly, Apache must 
        send them with the right <acronym>MIME</acronym> type. To do this, 
        add the following lines to your Apache configuration, either in the 
        <computeroutput>&lt;VirtualHost&gt;</computeroutput> section for your
        Bugzilla, or in the <computeroutput>&lt;Directory&gt;</computeroutput>
        section for your Bugzilla:
      </para>
      <para>
        <screen>AddType application/vnd.mozilla.xul+xml .xul
AddType application/rdf+xml .rdf</screen>
      </para>
    </section>    
  </section>

  <section id="multiple-bz-dbs">
    <title>Multiple Bugzilla databases with a single installation</title>

    <para>The previous instructions referred to a standard installation, with
      one unique Bugzilla database. However, you may want to host several
      distinct installations, without having several copies of the code. This is
      possible by using the PROJECT environment variable. When accessed,
      Bugzilla checks for the existence of this variable, and if present, uses
      its value to check for an alternative configuration file named
      <filename>localconfig.&lt;PROJECT&gt;</filename> in the same location as
      the default one (<filename>localconfig</filename>). It also checks for
      customized templates in a directory named
      <filename>&lt;PROJECT&gt;</filename> in the same location as the
      default one (<filename>template/&lt;langcode&gt;</filename>). By default
      this is <filename>template/en/default</filename> so PROJECT's templates
      would be located at <filename>template/en/PROJECT</filename>.</para> 

      <para>To set up an alternate installation, just export PROJECT=foo before
      running <command>checksetup.pl</command> for the first time. It will
      result in a file called <filename>localconfig.foo</filename> instead of
      <filename>localconfig</filename>. Edit this file as described above, with
      reference to a new database, and re-run <command>checksetup.pl</command>
      to populate it. That's all.</para>

    <para>Now you have to configure the web server to pass this environment
      variable when accessed via an alternate URL, such as virtual host for
      instance. The following is an example of how you could do it in Apache,
      other Webservers may differ.
<programlisting>
&lt;VirtualHost 212.85.153.228:80&gt;
    ServerName foo.bar.baz
    SetEnv PROJECT foo
    Alias /bugzilla /var/www/bugzilla
&lt;/VirtualHost&gt;
</programlisting>
    </para>

    <para>Don't forget to also export this variable before accessing Bugzilla
       by other means, such as cron tasks for instance.</para> 
  </section>

  <section id="os-specific">
    <title>OS-Specific Installation Notes</title>

    <para>Many aspects of the Bugzilla installation can be affected by the
    operating system you choose to install it on. Sometimes it can be made
    easier and others more difficult. This section will attempt to help you
    understand both the difficulties of running on specific operating systems
    and the utilities available to make it easier.
    </para>

    <para>If you have anything to add or notes for an operating system not covered,
    please file a bug in <ulink url="&bzg-bugs;">Bugzilla Documentation</ulink>.
    </para>

    <section id="os-win32">
      <title>Microsoft Windows</title>
      <para>
        Making Bugzilla work on Windows is more difficult than making it
        work on Unix.  For that reason, we still recommend doing so on a Unix 
        based system such as GNU/Linux.  That said, if you do want to get
        Bugzilla running on Windows, you will need to make the following
        adjustments. A detailed step-by-step
        <ulink url="https://wiki.mozilla.org/Bugzilla:Win32Install">
        installation guide for Windows</ulink> is also available
        if you need more help with your installation.
      </para>

      <section id="win32-perl">
        <title>Win32 Perl</title>
        <para>
          Perl for Windows can be obtained from 
          <ulink url="http://www.activestate.com/">ActiveState</ulink>.
           You should be able to find a compiled binary at <ulink 
           url="http://aspn.activestate.com/ASPN/Downloads/ActivePerl/" />.
           The following instructions assume that you are using version
           &min-perl-ver; of ActiveState.
          </para>

          <note>
            <para>
             These instructions are for 32-bit versions of Windows. If you are
             using a 64-bit version of Windows, you will need to install 32-bit
             Perl in order to install the 32-bit modules as described below.
            </para>
          </note>

        </section>
  
      <section id="win32-perl-modules">
        <title>Perl Modules on Win32</title>

        <para>
          Bugzilla on Windows requires the same perl modules found in
          <xref linkend="install-perlmodules"/>. The main difference is that
          windows uses <glossterm linkend="gloss-ppm">PPM</glossterm> instead
          of CPAN. ActiveState provides a GUI to manage Perl modules. We highly
          recommend that you use it. If you prefer to use ppm from the
          command-line, type:
        </para>

        <programlisting>
C:\perl&gt; <command>ppm install &lt;module name&gt;</command>
        </programlisting>

        <para>
          If you are using Perl 5.10.1, the best source for the Windows PPM modules
          needed for Bugzilla is probably the theory58S website, which you can add
          to your list of repositories as follows:
        </para>

        <programlisting>
<command>ppm repo add theory58S http://cpan.uwinnipeg.ca/PPMPackages/10xx/</command>
        </programlisting>

        <para>
          If you are using Perl 5.12 or newer, you no longer need to add
          this repository. All modules you need are already available from
	  the ActiveState repository.
        </para>
        <note>
          <para>
            The PPM repository stores modules in 'packages' that may have
            a slightly different name than the module.  If retrieving these
            modules from there, you will need to pay attention to the information
            provided when you run <command>checksetup.pl</command> as it will
            tell you what package you'll need to install.
          </para>
        </note>

        <tip>
          <para>
            If you are behind a corporate firewall, you will need to let the
            ActiveState PPM utility know how to get through it to access
            the repositories by setting the HTTP_proxy system environmental
            variable. For more information on setting that variable, see
            the ActiveState documentation.
          </para>
        </tip>
      </section>
  
      <section id="win32-http">
        <title>Serving the web pages</title>

        <para>
          As is the case on Unix based systems, any web server should
          be able to handle Bugzilla; however, the Bugzilla Team still
          recommends Apache whenever asked. No matter what web server
          you choose, be sure to pay attention to the security notes
          in <xref linkend="security-webserver-access"/>. More
          information on configuring specific web servers can be found
          in <xref linkend="http"/>.
        </para>

        <note>
          <para>
            The web server looks at <filename>/usr/bin/perl</filename> to
            call Perl. If you are using Apache on windows, you can set the
            <ulink url="http://httpd.apache.org/docs-2.0/mod/core.html#scriptinterpretersource">ScriptInterpreterSource</ulink>
            directive in your Apache config file to make it look at the
            right place: insert the line
            <programlisting>ScriptInterpreterSource Registry-Strict</programlisting>
            into your <filename>httpd.conf</filename> file, and create the key
            <programlisting>HKEY_CLASSES_ROOT\.cgi\Shell\ExecCGI\Command</programlisting>
            with <option>C:\Perl\bin\perl.exe -T</option> as value (adapt to your
            path if needed) in the registry. When this is done, restart Apache.
          </para>
        </note>

      </section>
      
      <section id="win32-email">
        <title>Sending Email</title>

        <para>
          To enable Bugzilla to send email on Windows, the server running the
          Bugzilla code must be able to connect to, or act as, an SMTP server.
        </para>
        
      </section>
    </section>

    <section id="os-macosx">
      <title><productname>Mac OS X</productname></title>

      <para>Making Bugzilla work on Mac OS X requires the following 
      adjustments.</para>

      <section id="macosx-sendmail">
        <title>Sendmail</title>

        <para>In Mac OS X 10.3 and later, 
        <ulink url="http://www.postfix.org/">Postfix</ulink> 
        is used as the built-in email server.  Postfix provides an executable
        that mimics sendmail enough to fool Bugzilla, as long as Bugzilla can 
        find it. Bugzilla is able to find the fake sendmail executable without
        any assistance.</para>

      </section>

      <section id="macosx-libraries">
        <title>Libraries &amp; Perl Modules on Mac OS X</title>

        <para>Apple does not include the GD library with Mac OS X. Bugzilla
        needs this for bug graphs.</para>

        <para>You can use MacPorts (<ulink url="http://www.macports.org/"/>)
        or Fink (<ulink url="http://sourceforge.net/projects/fink/"/>), both
        of which are similar in nature to the CPAN installer, but install
        common unix programs.</para>

        <para>Follow the instructions for setting up MacPorts or Fink.
        Once you have one installed, you'll want to use it to install the
        <filename>gd2</filename> package.
        </para>

        <para>Fink will prompt you for a number of dependencies, type 'y' and hit
        enter to install all of the dependencies and then watch it work. You will
        then be able to use <glossterm linkend="gloss-cpan">CPAN</glossterm> to
        install the GD Perl module.
        </para>

        <note>
          <para>To prevent creating conflicts with the software that Apple
          installs by default, Fink creates its own directory tree at 
          <filename class="directory">/sw</filename> where it installs most of
          the software that it installs. This means your libraries and headers
          will be at <filename class="directory">/sw/lib</filename> and
          <filename class="directory">/sw/include</filename> instead of
          <filename class="directory">/usr/lib</filename> and
          <filename class="directory">/usr/include</filename>. When the
          Perl module config script asks where your <filename>libgd</filename>
          is, be sure to tell it
          <filename class="directory">/sw/lib</filename>.
          </para>
        </note>

        <para>Also available via MacPorts and Fink is
        <filename>expat</filename>. After installing the expat package, you
        will be able to install XML::Parser using CPAN. If you use fink, there
        is one caveat. Unlike recent versions of
        the GD module, XML::Parser doesn't prompt for the location of the
        required libraries. When using CPAN, you will need to use the following
        command sequence:
        </para>

        <screen>
# perl -MCPAN -e'look XML::Parser'
# perl Makefile.PL EXPATLIBPATH=/sw/lib EXPATINCPATH=/sw/include
# make; make test; make install
# exit
        </screen>
        <para>
          The <command>look</command> command will download the module and spawn
          a new shell with the extracted files as the current working directory.
        </para>
        <para>
          You should watch the output from these <command>make</command> commands,
          especially <quote>make test</quote> as errors may prevent
          XML::Parser from functioning correctly with Bugzilla.
        </para>
        <para>
          The <command>exit</command> command will return you to your original shell.
        </para>
      </section>
    </section>

    <section id="os-linux">
      <title>Linux Distributions</title>
            <para>Many Linux distributions include Bugzilla and its 
            dependencies in their native package management systems. 
            Installing Bugzilla with root access on any Linux system 
            should be as simple as finding the Bugzilla package in the 
            package management application and installing it using the 
            normal command syntax. Several distributions also perform 
            the proper web server configuration automatically on installation.
            </para>
            <para>Please consult the documentation of your Linux 
            distribution for instructions on how to install packages, 
            or for specific instructions on installing Bugzilla with 
            native package management tools. There is also a 
            <ulink url="http://wiki.mozilla.org/Bugzilla:Linux_Distro_Installation">
            Bugzilla Wiki Page</ulink> for distro-specific installation
            notes.
            </para>
    </section>
  </section>


  <section id="nonroot">
    <title>UNIX (non-root) Installation Notes</title>

    <section>
      <title>Introduction</title>

      <para>If you are running a *NIX OS as non-root, either due
      to lack of access (web hosts, for example) or for security
      reasons, this will detail how to install Bugzilla on such
      a setup. It is recommended that you read through the
      <xref linkend="installation" />
      first to get an idea on the installation steps required.
      (These notes will reference to steps in that guide.)</para>

    </section>

    <section>
      <title>MySQL</title>

      <para>You may have MySQL installed as root. If you're
      setting up an account with a web host, a MySQL account
      needs to be set up for you. From there, you can create
      the bugs account, or use the account given to you.</para>

      <warning>
        <para>You may have problems trying to set up
        <command>GRANT</command> permissions to the database.
        If you're using a web host, chances are that you have a
        separate database which is already locked down (or one big
        database with limited/no access to the other areas), but you
        may want to ask your system administrator what the security
        settings are set to, and/or run the <command>GRANT</command>
        command for you.</para>

        <para>Also, you will probably not be able to change the MySQL
        root user password (for obvious reasons), so skip that
        step.</para>
      </warning>

      <section>
        <title>Running MySQL as Non-Root</title>
          <section>
            <title>The Custom Configuration Method</title>
              <para>Create a file .my.cnf in your 
              home directory (using /home/foo in this example)
              as follows....</para>
              <programlisting>
[mysqld]
datadir=/home/foo/mymysql
socket=/home/foo/mymysql/thesock
port=8081

[mysql]
socket=/home/foo/mymysql/thesock
port=8081

[mysql.server]
user=mysql
basedir=/var/lib

[safe_mysqld]
err-log=/home/foo/mymysql/the.log
pid-file=/home/foo/mymysql/the.pid
              </programlisting>
          </section>
          <section>
            <title>The Custom Built Method</title>
    
            <para>You can install MySQL as a not-root, if you really need to.
            Build it with PREFIX set to <filename class="directory">/home/foo/mysql</filename>,
            or use pre-installed executables, specifying that you want
            to put all of the data files in <filename class="directory">/home/foo/mysql/data</filename>.
            If there is another MySQL server running on the system that you
            do not own, use the -P option to specify a TCP port that is not
            in use.</para>
          </section>
    
          <section>
            <title>Starting the Server</title>
            <para>After your mysqld program is built and any .my.cnf file is 
            in place, you must initialize the databases (ONCE).</para>
            <screen>
<prompt>bash$</prompt> <command>mysql_install_db</command>
            </screen>
            <para>Then start the daemon with</para>
            <screen>
<prompt>bash$</prompt> <command>safe_mysql &amp;</command>
            </screen>
            <para>After you start mysqld the first time, you then connect to
            it as "root" and <command>GRANT</command> permissions to other
            users. (Again, the MySQL root account has nothing to do with
            the *NIX root account.)</para>
    
            <note>
              <para>You will need to start the daemons yourself. You can either
              ask your system administrator to add them to system startup files, or
              add a crontab entry that runs a script to check on these daemons
              and restart them if needed.</para>
            </note>
    
            <warning>
              <para>Do NOT run daemons or other services on a server without first
              consulting your system administrator! Daemons use up system resources
              and running one may be in violation of your terms of service for any
              machine on which you are a user!</para>
            </warning>
          </section>
      </section>
    </section>

    <section>
      <title>Perl</title>

      <para>
      On the extremely rare chance that you don't have Perl on
      the machine, you will have to build the sources
      yourself. The following commands should get your system
      installed with your own personal version of Perl:
      </para>

      <screen>
<prompt>bash$</prompt> <command>wget http://perl.org/CPAN/src/stable.tar.gz</command>
<prompt>bash$</prompt> <command>tar zvxf stable.tar.gz</command>
<prompt>bash$</prompt> <command>cd perl-&min-perl-ver;</command>
<prompt>bash$</prompt> <command>sh Configure -de -Dprefix=/home/foo/perl</command>
<prompt>bash$</prompt> <command>make &amp;&amp; make test &amp;&amp; make install</command>
      </screen>

      <para>
      Once you have Perl installed into a directory (probably
      in <filename class="directory">~/perl/bin</filename>), you will need to
      install the Perl Modules, described below.
      </para>
    </section>

    <section id="install-perlmodules-nonroot">
      <title>Perl Modules</title>

      <para>
      Installing the Perl modules as a non-root user is accomplished by
      running the <filename>install-module.pl</filename>
      script. For more details on this script, see 
      <ulink url="../html/api/install-module.html"><filename>install-module.pl</filename>
      documentation</ulink>
      </para>
    </section>

    <section>
      <title>HTTP Server</title>

      <para>Ideally, this also needs to be installed as root and
      run under a special web server account. As long as
      the web server will allow the running of *.cgi files outside of a
      cgi-bin, and a way of denying web access to certain files (such as a
      .htaccess file), you should be good in this department.</para>

      <section>
        <title>Running Apache as Non-Root</title>

        <para>You can run Apache as a non-root user, but the port will need
        to be set to one above 1024. If you type <command>httpd -V</command>,
        you will get a list of the variables that your system copy of httpd
        uses. One of those, namely HTTPD_ROOT, tells you where that
        installation looks for its config information.</para>

        <para>From there, you can copy the config files to your own home
        directory to start editing. When you edit those and then use the -d
        option to override the HTTPD_ROOT compiled into the web server, you
        get control of your own customized web server.</para>

        <note>
          <para>You will need to start the daemons yourself. You can either
          ask your system administrator to add them to system startup files, or
          add a crontab entry that runs a script to check on these daemons
          and restart them if needed.</para>
        </note>

        <warning>
          <para>Do NOT run daemons or other services on a server without first
          consulting your system administrator! Daemons use up system resources
          and running one may be in violation of your terms of service for any
          machine on which you are a user!</para>
        </warning>
      </section>
    </section>

    <section>
      <title>Bugzilla</title>

      <para>
      When you run <command>./checksetup.pl</command> to create
      the <filename>localconfig</filename> file, it will list the Perl
      modules it finds. If one is missing, go back and double-check the
      module installation from <xref linkend="install-perlmodules-nonroot"/>, 
      then delete the <filename>localconfig</filename> file and try again.
      </para>

      <warning>
        <para>One option in <filename>localconfig</filename> you
        might have problems with is the web server group. If you can't
        successfully browse to the <filename>index.cgi</filename> (like
        a Forbidden error), you may have to relax your permissions,
        and blank out the web server group. Of course, this may pose
        as a security risk. Having a properly jailed shell and/or
        limited access to shell accounts may lessen the security risk,
        but use at your own risk.</para>
      </warning>

      <section id="suexec">
        <title>suexec or shared hosting</title>

        <para>If you are running on a system that uses suexec (most shared
        hosting environments do this), you will need to set the
        <emphasis>webservergroup</emphasis> value in <filename>localconfig</filename>
        to match <emphasis>your</emphasis> primary group, rather than the one
        the web server runs under.  You will need to run the following
        shell commands after running <command>./checksetup.pl</command>,
        every time you run it (or modify <filename>checksetup.pl</filename>
        to do them for you via the system() command).
        <programlisting>
for i in docs graphs images js skins; do find $i -type d -exec chmod o+rx {} \; ; done
for i in jpg gif css js png html rdf xul; do find . -name \*.$i -exec chmod o+r {} \; ; done
find . -name .htaccess -exec chmod o+r {} \;
chmod o+x . data data/webdot
        </programlisting>
        Pay particular attention to the number of semicolons and dots.
        They are all important.  A future version of Bugzilla will
        hopefully be able to do this for you out of the box.</para>
      </section>
    </section>
  </section>


  <section id="upgrade">
    <title>Upgrading to New Releases</title>

    <para>Upgrading to new Bugzilla releases is very simple. There is
      a script named <filename>checksetup.pl</filename> included with
      Bugzilla that will automatically do all of the database migration
      for you.</para>

    <para>The following sections explain how to upgrade from one
      version of Bugzilla to another. Whether you are upgrading
      from one bug-fix version to another (such as 4.2 to 4.2.1)
      or from one major version to another (such as from 4.0 to 4.2),
      the instructions are always the same.</para>

    <note>
      <para>
        Any examples in the following sections are written as though the
        user were updating to version 4.2.1, but the procedures are the
        same no matter what version you're updating to. Also, in the
        examples, the user's Bugzilla installation is found at
        <filename>/var/www/html/bugzilla</filename>. If that is not the
        same as the location of your Bugzilla installation, simply
        substitute the proper paths where appropriate.
      </para>
    </note>

    <section id="upgrade-before">
      <title>Before You Upgrade</title>
    
      <para>Before you start your upgrade, there are a few important
        steps to take:</para>

      <orderedlist>
        <listitem>
          <para>
            Read the <ulink url="http://www.bugzilla.org/releases/">Release
            Notes</ulink> of the version you're upgrading to,
            particularly the "Notes for Upgraders" section.
          </para>
        </listitem>
        
        <listitem>
          <para>
            View the Sanity Check (<xref linkend="sanitycheck"/>) page
            on your installation before upgrading. Attempt to fix all warnings
            that the page produces before you go any further, or you may
            experience problems  during your upgrade.
          </para>
        </listitem>
        
        <listitem>
          <para>
            Shut down your Bugzilla installation by putting some HTML or
            text in the shutdownhtml parameter
            (see <xref linkend="parameters"/>).
          </para>
        </listitem>
        
        <listitem>
          <para>
            Make a backup of the Bugzilla database.
            <emphasis>THIS IS VERY IMPORTANT</emphasis>. If
            anything goes wrong during the upgrade, your installation
            can be corrupted beyond recovery. Having a backup keeps you safe.
          </para>

          <warning>
            <para>
              Upgrading is a one-way process. You cannot "downgrade" an
              upgraded Bugzilla. If you wish to revert to the old Bugzilla
              version for any reason, you will have to restore your database
              from this backup.
            </para>
          </warning>

          <para>Here are some sample commands you could use to backup
            your database, depending on what database system you're
            using. You may have to modify these commands for your
            particular setup.</para>
          
          <variablelist>
            <varlistentry>
              <term>MySQL:</term>
              <listitem>
                <para>
                  <command>mysqldump --opt -u bugs -p bugs > bugs.sql</command>
                </para>
              </listitem>
            </varlistentry>
              
            <varlistentry>
              <term>PostgreSQL:</term>
              <listitem>
                <para>
                  <command>pg_dump --no-privileges --no-owner -h localhost -U bugs
                    > bugs.sql</command>
                </para>
              </listitem>
            </varlistentry>
          </variablelist>
        </listitem>
      </orderedlist>
    </section>
      
    <section id="upgrade-files">
      <title>Getting The New Bugzilla</title>
      
      <para>There are three ways to get the new version of Bugzilla.
        We'll list them here briefly and then explain them
        more later.</para>
      
      <variablelist>
        <varlistentry>
          <term>Bzr (<xref linkend="upgrade-bzr"/>)</term>
          <listitem>
            <para>
              If you have <command>bzr</command> installed on your machine
              and you have Internet access, this is the easiest way to
              upgrade, particularly if you have made modifications
              to the code or templates of Bugzilla.
            </para>
          </listitem>
        </varlistentry>

        <varlistentry>
          <term>Download the tarball (<xref linkend="upgrade-tarball"/>)</term>
          <listitem>
            <para>
              This is a very simple way to upgrade, and good if you
              haven't made many (or any) modifications to the code or
              templates of your Bugzilla.
            </para>
          </listitem>
        </varlistentry>
        
        <varlistentry>
          <term>Patches (<xref linkend="upgrade-patches"/>)</term>
          <listitem>
            <para>
              If you have made modifications to your Bugzilla, and
              you don't have Internet access or you don't want to use
              bzr, then this is the best way to upgrade.
            </para>

            <para>
              You can only do minor upgrades (such as 4.2 to 4.2.1 or
              4.2.1 to 4.2.2) with patches.
            </para>
          </listitem>
        </varlistentry>
      </variablelist>
        
      <section id="upgrade-modified">
        <title>If you have modified your Bugzilla</title>
      
        <para>
          If you have modified the code or templates of your Bugzilla,
          then upgrading requires a bit more thought and effort.
          A discussion of the various methods of updating compared with
          degree and methods of local customization can be found in
          <xref linkend="template-method"/>.
        </para>

        <para>
          The larger the jump you are trying to make, the more difficult it
          is going to be to upgrade if you have made local customizations.
          Upgrading from 4.2 to 4.2.1 should be fairly painless even if
          you are heavily customized, but going from 2.18 to 4.2 is going
          to mean a fair bit of work re-writing your local changes to use
          the new files, logic, templates, etc. If you have done no local
          changes at all, however, then upgrading should be approximately
          the same amount of work regardless of how long it has been since
          your version was released.
        </para>
      </section>

      <section id="upgrade-bzr">
        <title>Upgrading using Bzr</title>

        <para>
          This requires that you have bzr installed (most Unix machines do),
          and requires that you are able to access
          <ulink url="http://bzr.mozilla.org/bugzilla/">bzr.mozilla.org</ulink>,
          which may not be an option if you don't have Internet access.
        </para>

        <para>
          The following shows the sequence of commands needed to update a
          Bugzilla installation via Bzr, and a typical series of results.
          These commands assume that you already have Bugzilla installed
          using Bzr.
        </para>

        <warning>
          <para>
            If your installation is still using CVS, you must first convert
            it to Bzr. A very detailed step by step documentation can be
            found on <ulink url="https://wiki.mozilla.org/Bugzilla:Moving_From_CVS_To_Bazaar">wiki.mozilla.org</ulink>.
          </para>
        </warning>

        <programlisting>
bash$ <command>cd /var/www/html/bugzilla</command>
bash$ <command>bzr switch 4.2</command> (only run this command when not yet running 4.2)
bash$ <command>bzr up -r tag:bugzilla-4.2.1</command>
+N  extensions/MoreBugUrl/
+N  extensions/MoreBugUrl/Config.pm
+N  extensions/MoreBugUrl/Extension.pm
...
 M  Bugzilla/Attachment.pm
 M  Bugzilla/Attachment/PatchReader.pm
 M  Bugzilla/Bug.pm
...
All changes applied successfully.
        </programlisting>

        <caution>
          <para>
            If a line in the output from <command>bzr up</command> mentions
            a conflict, then that represents a file with local changes that
            Bzr was unable to properly merge. You need to resolve these
            conflicts manually before Bugzilla (or at least the portion using
            that file) will be usable.
          </para>
        </caution>
      </section>

      <section id="upgrade-tarball">
        <title>Upgrading using the tarball</title>

        <para>
          If you are unable (or unwilling) to use Bzr, another option that's
          always available is to obtain the latest tarball from the <ulink
          url="http://www.bugzilla.org/download/">Download Page</ulink> and 
          create a new Bugzilla installation from that.
        </para>

        <para>
          This sequence of commands shows how to get the tarball from the
          command-line; it is also possible to download it from the site
          directly in a web browser. If you go that route, save the file
          to the <filename class="directory">/var/www/html</filename>
          directory (or its equivalent, if you use something else) and 
          omit the first three lines of the example.
        </para>

        <programlisting>
bash$ <command>cd /var/www/html</command>
bash$ <command>wget http://ftp.mozilla.org/pub/mozilla.org/webtools/bugzilla-4.2.1.tar.gz</command>
<emphasis>(Output omitted)</emphasis>
bash$ <command>tar xzvf bugzilla-4.2.1.tar.gz</command>
bugzilla-4.2.1/
bugzilla-4.2.1/colchange.cgi
<emphasis>(Output truncated)</emphasis>
bash$ <command>cd bugzilla-4.2.1</command>
bash$ <command>cp ../bugzilla/localconfig* .</command>
bash$ <command>cp -r ../bugzilla/data .</command>
bash$ <command>cd ..</command>
bash$ <command>mv bugzilla bugzilla.old</command>
bash$ <command>mv bugzilla-4.2.1 bugzilla</command>
        </programlisting>

        <warning>
          <para>
            The <command>cp</command> commands both end with periods which
            is a very important detail--it means that the destination
            directory is the current working directory.
          </para>
        </warning>

        <caution>
          <para>
            If you have some extensions installed, you will have to copy them
            to the new bugzilla directory too. Extensions are located in
            <filename>bugzilla/extensions/</filename>. Only copy those you
            installed, not those managed by the Bugzilla team.
          </para>
        </caution>

        <para>
          This upgrade method will give you a clean install of Bugzilla.
          That's fine if you don't have any local customizations that you
          want to maintain. If you do have customizations, then you will 
          need to reapply them by hand to the appropriate files.
        </para>
      </section>

      <section id="upgrade-patches">
        <title>Upgrading using patches</title>

        <para>
          A patch is a collection of all the bug fixes that have been made
          since the last bug-fix release.
        </para>

        <para>
          If you are doing a bug-fix upgrade&mdash;that is, one where only the 
          last number of the revision changes, such as from 4.2 to
          4.2.1&mdash;then you have the option of obtaining and applying a
          patch file from the <ulink
          url="http://www.bugzilla.org/download/">Download Page</ulink>.
        </para>

        <para>
          As above, this example starts with obtaining the file via the 
          command line. If you have already downloaded it, you can omit the
          first two commands.
        </para>

        <programlisting>
bash$ <command>cd /var/www/html/bugzilla</command>
bash$ <command>wget http://ftp.mozilla.org/pub/mozilla.org/webtools/bugzilla-4.2-to-4.2.1.diff.gz</command>
<emphasis>(Output omitted)</emphasis>
bash$ <command>gunzip bugzilla-4.2-to-4.2.1.diff.gz</command>
bash$ <command>patch -p1 &lt; bugzilla-4.2-to-4.2.1.diff</command>
patching file Bugzilla/Constants.pm
patching file enter_bug.cgi
<emphasis>(etc.)</emphasis>
        </programlisting>

        <warning>
          <para>
            Be aware that upgrading from a patch file does not change the
            entries in your <filename class="directory">.bzr</filename> directory.
            This could make it more difficult to upgrade using Bzr
            (<xref linkend="upgrade-bzr"/>) in the future.
          </para>
        </warning>

      </section>
    </section>

    <section id="upgrade-completion">
      <title>Completing Your Upgrade</title>

      <para>
        Now that you have the new Bugzilla code, there are a few final
        steps to complete your upgrade.
      </para>
      
      <orderedlist>
        <listitem>
          <para>
            If your new Bugzilla installation is in a different
            directory or on a different machine than your old Bugzilla
            installation, make sure that you have copied the
            <filename>data</filename> directory and the
            <filename>localconfig</filename> file from your old Bugzilla
            installation. (If you followed the tarball instructions
            above, this has already happened.)
          </para>
        </listitem>
        
        <listitem>
          <para>
            If this is a major update, check that the configuration
            (<xref linkend="configuration"/>) for your new Bugzilla is
            up-to-date. Sometimes the configuration requirements change
            between major versions.
          </para>
        </listitem>
        
        <listitem>
          <para>
            If you didn't do it as part of the above configuration step,
            now you need to run <command>checksetup.pl</command>, which
            will do everything required to convert your existing database
            and settings for the new version:
          </para>

          <programlisting>
bash$ <command>cd /var/www/html/bugzilla</command>
bash$ <command>./checksetup.pl</command>
          </programlisting>

          <warning>
            <para>
              The period at the beginning of the command
              <command>./checksetup.pl</command> is important and cannot
              be omitted.
            </para>
          </warning>
          
          <caution>
            <para>
              If this is a major upgrade (say, 3.6 to 4.2 or similar),
              running <command>checksetup.pl</command> on a large
              installation (75,000 or more bugs) can take a long time,
              possibly several hours.
            </para>
          </caution>
        </listitem>

        <listitem>
          <para>
            Clear any HTML or text that you put into the shutdownhtml
            parameter, to re-activate Bugzilla.
          </para> 
        </listitem>

        <listitem>
          <para>
            View the Sanity Check (<xref linkend="sanitycheck"/>) page in your
            upgraded Bugzilla.
          </para>
          <para>
            It is recommended that, if possible, you fix any problems
            you see, immediately. Failure to do this may mean that Bugzilla
            will not work correctly. Be aware that if the sanity check page
            contains more errors after an upgrade, it doesn't necessarily
            mean there are more errors in your database than there were
            before, as additional tests are added to the sanity check over
            time, and it is possible that those errors weren't being
            checked for in the old version.
          </para>
        </listitem>
      </orderedlist>

    </section>
    
    <section id="upgrade-notifications">
      <title>Automatic Notifications of New Releases</title>

      <para>
        Bugzilla 3.0 introduced the ability to automatically notify
        administrators when new releases are available, based on the
        <literal>upgrade_notification</literal> parameter, see
        <xref linkend="parameters"/>. Administrators will see these
        notifications when they access the <filename>index.cgi</filename>
        page, i.e. generally when logging in. Bugzilla will check once per
        day for new releases, unless the parameter is set to
        <quote>disabled</quote>. If you are behind a proxy, you may have to set
        the <literal>proxy_url</literal> parameter accordingly. If the proxy
        requires authentication, use the
        <literal>http://user:pass@proxy_url/</literal> syntax.
      </para>
    </section>
  </section>

</chapter>

<!-- Keep this comment at the end of the file
Local variables:
mode: sgml
sgml-always-quote-attributes:t
sgml-auto-insert-required-elements:t
sgml-balanced-tag-edit:t
sgml-exposed-tags:nil
sgml-general-insert-case:lower
sgml-indent-data:t
sgml-indent-step:2
sgml-local-catalogs:nil
sgml-local-ecat-files:nil
sgml-minimize-attributes:nil
sgml-namecase-general:t
sgml-omittag:t
sgml-parent-document:("Bugzilla-Guide.xml" "book" "chapter")
sgml-shorttag:t
sgml-tag-region-if-active:t
End:
-->