| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Use "struct strbuf" from Git to remove the limit on file path length.
Notes on scan-tree:
This is slightly involved since I decided to pass the strbuf into
add_repo() and modify if whenever a new file name is required, which
should avoid any extra allocations within that function. The pattern
there is to append the filename, use it and then reset the buffer to its
original length (retaining a trailing '/').
Notes on ui-snapshot:
Since write_archive modifies the argv array passed to it we
copy the argv_array values into a new array of char* and then free the
original argv_array structure and the new array without worrying about
what the values now look like.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
After this change there is one remaining call 'fmt("%s", delim)' in
ui-shared.c but is needed as delim is stack allocated and so cannot be
returned from the function.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
While doing this, remove declarations from header files where the
corresponding definition is declared "static" in order to avoid build
errors.
Also re-order existing headers in ui-*.c so that the file-specific
header always comes immediately after "cgit.h", helping with future
consistency.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
* Remove whitespace at the end of lines.
* Replace space indentation by tabs.
* Add whitespace before/after several operators ("+", "-", "*", ...)
* Add whitespace to assignments ("foo = bar;").
* Fix whitespace in parameter lists ("foobar(foo, bar, 42)").
Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
|
|
After some back and forth with Jamie and René, it looks like the git
config semantics are going to be like this:
- gitweb.category maps to the cgit repo config key "section"
- gitweb.description maps to the cgit repo config key "desc"
- gitweb.owner maps to the cgit repo config key "owner"
- cgit.* maps to all cgit repo config keys
This option can be enabled with "enable-git-config=1", and replaces
all previous "enable-gitweb-*" config keys.
The order of operations is as follows:
- git config settings are applied in the order that they exist in
the git config file
- if the owner is not set from git config, get the owner using the
usual getpwuid call
- if the description is not set from git config, look inside the
static $path/description file
- if section-from-path=1, override whatever previous settings were
inside of git config using the section-from-path logic
- parse $path/cgitrc for local repo.* settings, that override all
previous settings
|
|
|
|
Use gitweb.category from git config to determine repo's section, if
option is enabled.
|
|
Use gitweb.description instead of description file to determine
description, if option is enabled.
|
|
No references are kept to the memory pointed to by the 'rel' variable, so
it should be free()'d before returning from add_repo().
Signed-off-by: Jamie Couture <jamie.couture@gmail.com>
Signed-off-by: Lars Hjemli <larsh@hjemli.net>
|
|
This patch makes cgit properly abort in case the projectsfile cannot
be opened. Without the added return cgit continues using the projects
pointer which is NULL and thus causes a segfault.
|
|
Paths that start with a period ('.') are considered hidden in the Unix world.
scan_path() should arguably not recurse into these directories by default.
This patch makes it so, and introduces the "scan-hidden-path" config variable
for overriding the new default and revert to the old behaviour (scanning _all_
directories, including hidden .directories).
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Lars Hjemli <larsh@prediktor.no>
|
|
When scanning a tree containing inaccessible directories (e.g. '.ssh'
directories in users' homedirs, or repos with explicitly restricted access),
scan_path() currently causes three lines of "Permissions denied" errors to be
printed to the CGI error log per inaccessible directory:
Error checking path /home/foo/.ssh: Permission denied (13)
Error checking path /home/foo/.ssh/.git: Permission denied (13)
Error opening directory /home/foo/.ssh: Permission denied (13)
This is a side-effect of calling is_git_dir(path) and
is_git_dir(fmt("%s/.git", path) _before_ we try to opendir(path).
By placing the opendir(path) before the two is_git_dir() calls, we reduce the
noise to a single line per inaccessible directory:
Error opening directory /home/foo/.ssh: Permission denied (13)
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Lars Hjemli <larsh@prediktor.no>
|
|
This option is used to specify a filename which needs to be present in
the repositories found during `scan-path` processing. By setting this
option to 'git-daemon-export-ok', only repositories explicitly marked
for git daemon export will be included in the cgit configuration.
Signed-off-by: Felix Hanley <felix@seconddrawer.com.au>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
Conflicts:
scan-tree.c
|
|
This option can be used to autogenerate section names during scan-path
processing.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
The value of this option is used as the default value for repo.readme.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
When this option is enabled (which it is by default), cgit will lookup
the 'gitweb.owner' setting in each git config file found when processing
the 'scan-path' option.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
When this option is enabled, the '.git' suffix of repository directories
found while processing the 'scan-path' option will be removed.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
This option specifies the location of a projectlist file as used by
gitweb - when 'scan-tree' is later specified, only the projects listed in
the projectlist file will be added.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
If such a file exists, the repo is not added to the repolist.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
When recursively scanning a directory tree looking for git repositories,
cgit will now parse cgitrc files found within such repositories.
The repo-specific config files can include any repo-specific options
except 'repo.url' and 'repo.path'. Also, in such config files the 'repo.'
prefix can not be used, i.e. the valid options then becomes:
* name
* clone-url
* desc
* ower
* defbranch
* snapshots
* enable-log-filecount
* enable-log-linecount
* max-stats
* module-link
* section
* about-filter
* commit-filter
* source-filter
* readme
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
We don't want to descend into every subdirectory of a git repository
with a workdir.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
Signed-off-by: Stefan Naewe <stefan.naewe@atlas-elektronik.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
This function is used to read the full content of a textfile into a
newly allocated buffer (with zerotermination).
It replaces the earlier readfile() in scan-tree.c (which was rather
error-prone[1]), and is reused by read_agefile() in ui-repolist.c.
1: No checks for EINTR and EAGAIN, fixed-size buffer
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
If readfile() reads an empty file, fgets() won't truncate the buffer
and it'll still contain the contents of the previously read file.
[lh: fixed similar issue in ui-repolist.c]
Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
This option makes cgit scan a directory tree looking for git repositories,
generating suitable definitions for a cgitrc file on stdout.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
