summaryrefslogtreecommitdiffstats
path: root/db-update
AgeCommit message (Collapse)AuthorFilesLines
2011-04-02Add signature files to update/move/remove targetsRémy Oudompheng1-0/+7
Signature files are optional and the previous behaviour is unchanged when signatures files do not exist. Signed-off-by: Rémy Oudompheng <remy@archlinux.org> Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
2011-01-15Move repo manipulation code into common functionsPierre Schmitz1-5/+1
repo-add and repo-remove is now indirectly called by arch_repo_add/remove. This simplifies future extensions like incremental file list creations. See FS#11302
2010-12-02db-update: Fail if a set of split packages is incompletePierre Schmitz1-0/+3
2010-09-11Use local config instead of guessing by hostnamePierre Schmitz1-2/+2
Using the hostname to decide which repos to use is not releiable and hard to test. Instead use config.local to configure these. config files for sigurd and gerolde were added which can be copied or symlinked to config.local on the specific host.
2010-09-05Check if package exists in any other repository on update20100906Pierre Schmitz1-2/+2
This also checks if the sam package exists within the old package layout (without package pool)
2010-09-02Set correct group after touching the db filePierre Schmitz1-0/+1
* When writing the db file ensure that it has write permission of the group which owns the parent directory. * This should make the adjust-permissions cron job obsolete.
2010-08-24db-update: Make sure there are no links in the staging directoryPierre Schmitz1-0/+3
2010-08-17Add additional checks when reading PKGBUILDsPierre Schmitz1-1/+1
If reading from a PKGBUILD fails stop immediatly. Also put out more usefull error messages.
2010-08-17minor fix to error messageAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
2010-08-17Don't try to update no packagePierre Schmitz1-4/+6
Check if there are packages to update for given architecure. Previously db-update quit when only one arch of a package was available.
2010-08-15Lock repos before checkingPierre Schmitz1-18/+14
2010-08-15Use common names for reposPierre Schmitz1-2/+2
2010-08-14Rewrite of db-updatePierre Schmitz1-169/+58
* db-update now updates all repos with packages in its staging dirs * sanity checks are performed before any repo is touched * improved performance * less code; easier to maintain
2010-08-13Simplify check for existing packagesPierre Schmitz1-10/+5
2010-08-13removed useless statementsPierre Schmitz1-9/+1
2010-08-13Remove check which was already covered by check_repo_permissionPierre Schmitz1-7/+0
2010-08-13Abort if package already exists in repoPierre Schmitz1-4/+2
Don't try to be smart and remove packages from the staging dir without asking.
2010-08-13Use common functions to print messages, warnings and errorsPierre Schmitz1-25/+23
These functions are copied from makepkg
2010-08-13Check permission before any actionPierre Schmitz1-9/+1
Added a function to check if user has permission to alter the repos and db files.
2010-08-10Use more consitent naming for package poolPierre Schmitz1-7/+5
There are no longer architecture-specific subdirs and the structure was switch to this: ftp └── pool ├── community └── packages packages contains all packages from core, extra and testing; this naming is in sync with the svn repo naming: svn-packages and svn-community
2010-08-08Source PKGBUILD in subshellsPierre Schmitz1-20/+22
This patch sources a PKGBUILD in a subshells instead of directly. This way we don't polute our scope or overwrite our vars which might lead to unexpected behavior.
2010-08-08Move common function to db-functionsPierre Schmitz1-22/+0
db-functions now sets an individual $WORKDIR and implements trap functinos that remove locks on exit or error. There are new functions to lock and unlock the running script. misc-scripts/ftpdir-cleanup was renamed to ftpdir-cleanup-repo as the cron-job had the same name. Script names have to be unique when using db-functions.
2010-08-08use common workdirPierre Schmitz1-2/+0
2010-08-08Prepare for variable db file compressionPierre Schmitz1-0/+1
2010-08-08Remove BUILDSCRIPT variablePierre Schmitz1-4/+4
There is no need to have a variable for things like PKGBUILD that are very unlikely to ever change.
2010-08-08Remove check for old staging dirsPierre Schmitz1-20/+0
devtools take care of this anyway
2010-08-08Reduce verbosityPierre Schmitz1-16/+7
Only inform of errors and processes that might take longer.
2010-08-08Use package pool instead of $repo/os/any dirsPierre Schmitz1-11/+5
2010-06-29don't fail if any package already existsPierre Schmitz1-5/+9
2010-06-29don't mix db files of different archesPierre Schmitz1-5/+6
2010-06-20Replace PKGPOOL_DIR by a function callPierre Schmitz1-4/+4
The package pool dir depends on the host; so we solve this similar to get_repos_for_host() Note: There is no "os" subdir for the package pool.
2010-05-03Add PKGPOOL_DIR config variableAaron Griffin1-4/+4
This is a relative var, descendent from FTP_BASE. We do this because we also need a relative path to the package pool dir
2010-04-28db-update: Use a master package pool and symlinksAaron Griffin1-7/+19
This should save lots of transfer time with the mirrors :) Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2010-04-11Fail if lock couldn't be obtained; Unlock the repos if ftpdir-cleanup failsPierre Schmitz1-1/+1
2010-03-31fix permissions of incoming packages20100410Andrea Scarpino1-0/+2
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
2010-03-31don't publish *.old filesPierre Schmitz1-1/+1
2010-02-21Accept any *.pkg.tar.* package file namePierre Schmitz1-6/+6
With this patch packages with different compressions are accepted. It is ensured that one cannot have the same package with different compression extensions. The new functions getpkgfile{,s} are used to sanitize globed filenames. Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
2009-09-18Collapse duplicate loops for staging removalAaron Griffin1-11/+1
Add 'any' to the items looped over in the ${ARCHES[@]} loop Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-09-18Remove pkg from $stagedir if already in FTP repoFrancois Charette1-0/+23
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-09-14Ensure you don't update DBs on the wrong serverDan McGee1-1/+12
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-14Be more careful with config file inclusionDan McGee1-0/+1
We can't really do the basedir magic from db-functions as it is just being sourced and is not the currently executing script. Although a bit repetitive, it is a lot safer to just include the config file everywhere. Noticed this when trying to run the latest available scripts on sigurd. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-08-18Remove dependence on makepkg.confAaron Griffin1-2/+0
Removed the need for makepkg.conf * Killed off CARCH * Added PKGEXT to the config file * Remove source_makepkg function * Source config file where makepkg.conf was needed Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-08-18Replace DB_COMPRESSION with DBEXT in the configAaron Griffin1-7/+6
DBEXT contains the full extension for the db files (.db.tar.gz) and is recorded in the config file Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-08-16Add DB_COMPRESSION var to all scripts that need itDan McGee1-0/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-07-22remove support for different svn reposPierre Schmitz1-4/+2
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-07-22db-update: Move some steps inside an 'if'Francois Charette1-6/+8
[Aaron: keep WORKDIR creation outside the loop, as its removed at the end] Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-07-22db-update: Fix final repo_unlockAaron Griffin1-2/+2
Because we lock/unlock in a loop, simply remove the cleanup trap at the end of the process, and manually clean up the work dir Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-07-21remove trailing slash from ftppath[_any]Francois Charette1-3/+3
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-07-21any support: use relative symlinksAaron Griffin1-1/+1
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-07-20Minor syntactic improvements in db-updateFrancois Charette1-4/+3
* also added error msg for repo_lock in db-functions [Aaron: keep quotes around $WORKDIR] Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-11-09 15:42:55 +0100