Merged with develop and updated to new changelog.

29 files changed, 7235 insertions, 0 deletions

diff --git a/user_guide_src/source/libraries/benchmark.rst b/user_guide_src/source/libraries/benchmark.rst
new file mode 100644
index 000000000..5b86142dd
--- /dev/null
+++ b/user_guide_src/source/libraries/benchmark.rst
@@ -0,0 +1,122 @@
+##################
+Benchmarking Class
+##################
+
+CodeIgniter has a Benchmarking class that is always active, enabling the
+time difference between any two marked points to be calculated.
+
+.. note:: This class is initialized automatically by the system so there
+	is no need to do it manually.
+
+In addition, the benchmark is always started the moment the framework is
+invoked, and ended by the output class right before sending the final
+view to the browser, enabling a very accurate timing of the entire
+system execution to be shown.
+
+.. contents:: Table of Contents
+
+Using the Benchmark Class
+=========================
+
+The Benchmark class can be used within your
+:doc:`controllers </general/controllers>`,
+:doc:`views </general/views>`, or your :doc:`models </general/models>`.
+The process for usage is this:
+
+#. Mark a start point
+#. Mark an end point
+#. Run the "elapsed time" function to view the results
+
+Here's an example using real code::
+
+	$this->benchmark->mark('code_start');
+
+	// Some code happens here
+
+	$this->benchmark->mark('code_end');
+
+	echo $this->benchmark->elapsed_time('code_start', 'code_end');
+
+.. note:: The words "code_start" and "code_end" are arbitrary. They
+	are simply words used to set two markers. You can use any words you
+	want, and you can set multiple sets of markers. Consider this example::
+
+		$this->benchmark->mark('dog');
+
+		// Some code happens here
+
+		$this->benchmark->mark('cat');
+
+		// More code happens here
+
+		$this->benchmark->mark('bird');
+
+		echo $this->benchmark->elapsed_time('dog', 'cat');
+		echo $this->benchmark->elapsed_time('cat', 'bird');
+		echo $this->benchmark->elapsed_time('dog', 'bird');
+
+
+Profiling Your Benchmark Points
+===============================
+
+If you want your benchmark data to be available to the
+:doc:`Profiler </general/profiling>` all of your marked points must
+be set up in pairs, and each mark point name must end with _start and
+_end. Each pair of points must otherwise be named identically. Example::
+
+	$this->benchmark->mark('my_mark_start');
+
+	// Some code happens here...
+
+	$this->benchmark->mark('my_mark_end'); 
+
+	$this->benchmark->mark('another_mark_start');
+
+	// Some more code happens here...
+
+	$this->benchmark->mark('another_mark_end');
+
+Please read the :doc:`Profiler page </general/profiling>` for more
+information.
+
+Displaying Total Execution Time
+===============================
+
+If you would like to display the total elapsed time from the moment
+CodeIgniter starts to the moment the final output is sent to the
+browser, simply place this in one of your view templates::
+
+	<?php echo $this->benchmark->elapsed_time();?>
+
+You'll notice that it's the same function used in the examples above to
+calculate the time between two point, except you are **not** using any
+parameters. When the parameters are absent, CodeIgniter does not stop
+the benchmark until right before the final output is sent to the
+browser. It doesn't matter where you use the function call, the timer
+will continue to run until the very end.
+
+An alternate way to show your elapsed time in your view files is to use
+this pseudo-variable, if you prefer not to use the pure PHP::
+
+	{elapsed_time}
+
+.. note:: If you want to benchmark anything within your controller
+	functions you must set your own start/end points.
+
+Displaying Memory Consumption
+=============================
+
+If your PHP installation is configured with --enable-memory-limit, you
+can display the amount of memory consumed by the entire system using the
+following code in one of your view file::
+
+	<?php echo $this->benchmark->memory_usage();?>
+
+.. note:: This function can only be used in your view files. The consumption
+	will reflect the total memory used by the entire app.
+
+An alternate way to show your memory usage in your view files is to use
+this pseudo-variable, if you prefer not to use the pure PHP::
+
+	{memory_usage}
+
diff --git a/user_guide_src/source/libraries/caching.rst b/user_guide_src/source/libraries/caching.rst
new file mode 100644
index 000000000..2f06d29f9
--- /dev/null
+++ b/user_guide_src/source/libraries/caching.rst
@@ -0,0 +1,220 @@
+##############
+Caching Driver
+##############
+
+CodeIgniter features wrappers around some of the most popular forms of
+fast and dynamic caching. All but file-based caching require specific
+server requirements, and a Fatal Exception will be thrown if server
+requirements are not met.
+
+.. contents:: Table of Contents
+
+*************
+Example Usage
+*************
+
+The following example will load the cache driver, specify `APC <#apc>`_
+as the driver to use, and fall back to file-based caching if APC is not
+available in the hosting environment.
+
+::
+
+	$this->load->driver('cache', array('adapter' => 'apc', 'backup' => 'file'));
+	
+	if ( ! $foo = $this->cache->get('foo'))
+	{
+		echo 'Saving to the cache!<br />';
+		$foo = 'foobarbaz!';
+		
+		// Save into the cache for 5 minutes
+		$this->cache->save('foo', $foo, 300);
+	}
+	
+	echo $foo;
+
+******************
+Function Reference
+******************
+
+.. php:class:: CI_Cache
+
+is_supported()
+===============
+
+	.. php:method:: is_supported ( $driver )
+
+		This function is automatically called when accessing drivers via
+		$this->cache->get(). However, if the individual drivers are used, make
+		sure to call this function to ensure the driver is supported in the
+		hosting environment.
+		
+		:param string $driver: the name of the caching driver
+		:returns: TRUE if supported, FALSE if not
+		:rtype: Boolean
+		
+		::
+				
+			if ($this->cache->apc->is_supported()
+			{
+				if ($data = $this->cache->apc->get('my_cache'))
+				{
+					// do things.
+				}
+			}
+
+
+get()
+=====
+
+	.. php:method:: get ( $id )
+	
+		This function will attempt to fetch an item from the cache store. If the
+		item does not exist, the function will return FALSE.
+
+		:param string $id: name of cached item
+		:returns: The item if it exists, FALSE if it does not
+		:rtype: Mixed
+		
+		::
+
+			$foo = $this->cache->get('my_cached_item');
+
+
+save()
+======
+
+	.. php:method:: save ( $id , $data [, $ttl])
+	
+		This function will save an item to the cache store. If saving fails, the
+		function will return FALSE.
+
+		:param string $id: name of the cached item
+		:param mixed $data: the data to save
+		:param int $ttl: Time To Live, in seconds (default 60)
+		:returns: TRUE on success, FALSE on failure
+		:rtype: Boolean
+
+		::
+
+			$this->cache->save('cache_item_id', 'data_to_cache');
+	
+delete()
+========
+
+	.. php:method:: delete ( $id )
+	
+		This function will delete a specific item from the cache store. If item
+		deletion fails, the function will return FALSE.
+
+		:param string $id: name of cached item
+		:returns: TRUE if deleted, FALSE if the deletion fails
+		:rtype: Boolean
+		
+		::
+
+			$this->cache->delete('cache_item_id');
+
+clean()
+=======
+
+	.. php:method:: clean ( )
+	
+		This function will 'clean' the entire cache. If the deletion of the
+		cache files fails, the function will return FALSE.
+
+		:returns: TRUE if deleted, FALSE if the deletion fails
+		:rtype: Boolean
+		
+		::
+
+			$this->cache->clean();
+
+cache_info()
+=============
+
+	.. php:method:: cache_info ( )
+
+		This function will return information on the entire cache.
+
+		:returns: information on the entire cache
+		:rtype: Mixed
+		
+		::
+
+			var_dump($this->cache->cache_info());
+		
+		.. note:: The information returned and the structure of the data is dependent
+			on which adapter is being used.
+	
+
+get_metadata()
+===============
+
+	.. php:method:: get_metadata ( $id )
+	
+		This function will return detailed information on a specific item in the
+		cache.
+		
+		:param string $id: name of cached item
+		:returns: metadadta for the cached item
+		:rtype: Mixed
+		
+		::
+
+			var_dump($this->cache->get_metadata('my_cached_item'));
+
+		.. note:: The information returned and the structure of the data is dependent
+			on which adapter is being used.
+
+			
+*******
+Drivers
+*******
+
+Alternative PHP Cache (APC) Caching
+===================================
+
+All of the functions listed above can be accessed without passing a
+specific adapter to the driver loader as follows::
+
+	$this->load->driver('cache');
+	$this->cache->apc->save('foo', 'bar', 10);
+
+For more information on APC, please see
+`http://php.net/apc <http://php.net/apc>`_
+
+File-based Caching
+==================
+
+Unlike caching from the Output Class, the driver file-based caching
+allows for pieces of view files to be cached. Use this with care, and
+make sure to benchmark your application, as a point can come where disk
+I/O will negate positive gains by caching.
+
+All of the functions listed above can be accessed without passing a
+specific adapter to the driver loader as follows::
+
+	$this->load->driver('cache');
+	$this->cache->file->save('foo', 'bar', 10);
+
+Memcached Caching
+=================
+
+Multiple Memcached servers can be specified in the memcached.php
+configuration file, located in the application/config/ directory.
+
+All of the functions listed above can be accessed without passing a
+specific adapter to the driver loader as follows::
+
+	$this->load->driver('cache');
+	$this->cache->memcached->save('foo', 'bar', 10);
+
+For more information on Memcached, please see
+`http://php.net/memcached <http://php.net/memcached>`_
+
+Dummy Cache
+===========
+
+This is a caching backend that will always 'miss.' It stores no data,
+but lets you keep your caching code in place in environments that don't
+support your chosen cache.
diff --git a/user_guide_src/source/libraries/calendar.rst b/user_guide_src/source/libraries/calendar.rst
new file mode 100644
index 000000000..3964db25e
--- /dev/null
+++ b/user_guide_src/source/libraries/calendar.rst
@@ -0,0 +1,174 @@
+#################
+Calendaring Class
+#################
+
+The Calendar class enables you to dynamically create calendars. Your
+calendars can be formatted through the use of a calendar template,
+allowing 100% control over every aspect of its design. In addition, you
+can pass data to your calendar cells.
+
+Initializing the Class
+======================
+
+Like most other classes in CodeIgniter, the Calendar class is
+initialized in your controller using the $this->load->library function::
+
+	$this->load->library('calendar');
+
+Once loaded, the Calendar object will be available using::
+
+	$this->calendar
+
+Displaying a Calendar
+=====================
+
+Here is a very simple example showing how you can display a calendar::
+
+	$this->load->library('calendar');
+	echo $this->calendar->generate();
+
+The above code will generate a calendar for the current month/year based
+on your server time. To show a calendar for a specific month and year
+you will pass this information to the calendar generating function::
+
+	$this->load->library('calendar');
+	echo $this->calendar->generate(2006, 6);
+
+The above code will generate a calendar showing the month of June in
+2006. The first parameter specifies the year, the second parameter
+specifies the month.
+
+Passing Data to your Calendar Cells
+===================================
+
+To add data to your calendar cells involves creating an associative
+array in which the keys correspond to the days you wish to populate and
+the array value contains the data. The array is passed to the third
+parameter of the calendar generating function. Consider this example::
+
+	$this->load->library('calendar');
+
+	$data = array(
+	               3  => 'http://example.com/news/article/2006/03/',
+	               7  => 'http://example.com/news/article/2006/07/',
+	               13 => 'http://example.com/news/article/2006/13/',
+	               26 => 'http://example.com/news/article/2006/26/'
+	             );
+
+	echo $this->calendar->generate(2006, 6, $data);
+
+Using the above example, day numbers 3, 7, 13, and 26 will become links
+pointing to the URLs you've provided.
+
+.. note:: By default it is assumed that your array will contain links.
+	In the section that explains the calendar template below you'll see how
+	you can customize how data passed to your cells is handled so you can
+	pass different types of information.
+
+Setting Display Preferences
+===========================
+
+There are seven preferences you can set to control various aspects of
+the calendar. Preferences are set by passing an array of preferences in
+the second parameter of the loading function. Here is an example::
+
+	$prefs = array (
+	               'start_day'    => 'saturday',
+	               'month_type'   => 'long',
+	               'day_type'     => 'short'
+	             );
+
+	$this->load->library('calendar', $prefs);
+
+	echo $this->calendar->generate();
+
+The above code would start the calendar on saturday, use the "long"
+month heading, and the "short" day names. More information regarding
+preferences below.
+
+======================  ===========  ===============================================  ===================================================================
+Preference              Default		Options						Description                                                    
+======================  ===========  ===============================================  ===================================================================
+**template**           	None		None                                         	A string containing your calendar template.
+											See the template section below.
+**local_time**        	time()		None						A Unix timestamp corresponding to the current time.
+**start_day**         	sunday		Any week day (sunday, monday, tuesday, etc.) 	Sets the day of the week the calendar should start on.
+**month_type**        	long          	long, short                                   	Determines what version of the month name to use in the header.
+											long = January, short = Jan.
+**day_type**		abr		long, short, abr 				Determines what version of the weekday names to use in 
+											the column headers. long = Sunday, short = Sun, abr = Su.
+**show_next_prev**	FALSE		TRUE/FALSE (boolean)				Determines whether to display links allowing you to toggle
+											to next/previous months. See information on this feature below.
+**next_prev_url**     	None     	  A URL						Sets the basepath used in the next/previous calendar links.
+======================  ===========  ===============================================  ===================================================================
+
+
+Showing Next/Previous Month Links
+=================================
+
+To allow your calendar to dynamically increment/decrement via the
+next/previous links requires that you set up your calendar code similar
+to this example::
+
+	$prefs = array (
+	               'show_next_prev'  => TRUE,
+	               'next_prev_url'   => 'http://example.com/index.php/calendar/show/'
+	             );
+
+	$this->load->library('calendar', $prefs);
+
+	echo $this->calendar->generate($this->uri->segment(3), $this->uri->segment(4));
+
+You'll notice a few things about the above example:
+
+-  You must set the "show_next_prev" to TRUE.
+-  You must supply the URL to the controller containing your calendar in
+   the "next_prev_url" preference.
+-  You must supply the "year" and "month" to the calendar generating
+   function via the URI segments where they appear (Note: The calendar
+   class automatically adds the year/month to the base URL you
+   provide.).
+
+Creating a Calendar Template
+============================
+
+By creating a calendar template you have 100% control over the design of
+your calendar. Each component of your calendar will be placed within a
+pair of pseudo-variables as shown here::
+
+	$prefs['template'] = '
+
+	   {table_open}<table border="0" cellpadding="0" cellspacing="0">{/table_open}
+
+	   {heading_row_start}<tr>{/heading_row_start}
+
+	   {heading_previous_cell}<th><a href="{previous_url}">&lt;&lt;</a></th>{/heading_previous_cell}
+	   {heading_title_cell}<th colspan="{colspan}">{heading}</th>{/heading_title_cell}
+	   {heading_next_cell}<th><a href="{next_url}">&gt;&gt;</a></th>{/heading_next_cell}
+
+	   {heading_row_end}</tr>{/heading_row_end}
+
+	   {week_row_start}<tr>{/week_row_start}
+	   {week_day_cell}<td>{week_day}</td>{/week_day_cell}
+	   {week_row_end}</tr>{/week_row_end}
+
+	   {cal_row_start}<tr>{/cal_row_start}
+	   {cal_cell_start}<td>{/cal_cell_start}
+
+	   {cal_cell_content}<a href="{content}">{day}</a>{/cal_cell_content}
+	   {cal_cell_content_today}<div class="highlight"><a href="{content}">{day}</a></div>{/cal_cell_content_today}
+
+	   {cal_cell_no_content}{day}{/cal_cell_no_content}
+	   {cal_cell_no_content_today}<div class="highlight">{day}</div>{/cal_cell_no_content_today}
+
+	   {cal_cell_blank}&nbsp;{/cal_cell_blank}
+
+	   {cal_cell_end}</td>{/cal_cell_end}
+	   {cal_row_end}</tr>{/cal_row_end}
+
+	   {table_close}</table>{/table_close}
+	';
+
+	$this->load->library('calendar', $prefs);
+
+	echo $this->calendar->generate();
\ No newline at end of file
diff --git a/user_guide_src/source/libraries/cart.rst b/user_guide_src/source/libraries/cart.rst
new file mode 100644
index 000000000..850d7e9a8
--- /dev/null
+++ b/user_guide_src/source/libraries/cart.rst
@@ -0,0 +1,294 @@
+###################
+Shopping Cart Class
+###################
+
+The Cart Class permits items to be added to a session that stays active
+while a user is browsing your site. These items can be retrieved and
+displayed in a standard "shopping cart" format, allowing the user to
+update the quantity or remove items from the cart.
+
+Please note that the Cart Class ONLY provides the core "cart"
+functionality. It does not provide shipping, credit card authorization,
+or other processing components.
+
+.. contents:: Page Contents
+
+Initializing the Shopping Cart Class
+====================================
+
+.. important:: The Cart class utilizes CodeIgniter's :doc:`Session
+	Class <sessions>` to save the cart information to a database, so
+	before using the Cart class you must set up a database table as
+	indicated in the :doc:`Session Documentation <sessions>`, and set the
+	session preferences in your application/config/config.php file to
+	utilize a database.
+
+To initialize the Shopping Cart Class in your controller constructor,
+use the $this->load->library function::
+
+	$this->load->library('cart');
+
+Once loaded, the Cart object will be available using::
+ 	
+	$this->cart
+
+.. note:: The Cart Class will load and initialize the Session Class
+	automatically, so unless you are using sessions elsewhere in your
+	application, you do not need to load the Session class.
+
+Adding an Item to The Cart
+==========================
+
+To add an item to the shopping cart, simply pass an array with the
+product information to the $this->cart->insert() function, as shown
+below::
+
+	$data = array(
+	               'id'      => 'sku_123ABC',
+	               'qty'     => 1,
+	               'price'   => 39.95,
+	               'name'    => 'T-Shirt',
+	               'options' => array('Size' => 'L', 'Color' => 'Red')
+	            );
+
+	$this->cart->insert($data);
+
+.. important:: The first four array indexes above (id, qty, price, and
+	name) are **required**. If you omit any of them the data will not be
+	saved to the cart. The fifth index (options) is optional. It is intended
+	to be used in cases where your product has options associated with it.
+	Use an array for options, as shown above.
+
+The five reserved indexes are:
+
+-  **id** - Each product in your store must have a unique identifier.
+   Typically this will be an "sku" or other such identifier.
+-  **qty** - The quantity being purchased.
+-  **price** - The price of the item.
+-  **name** - The name of the item.
+-  **options** - Any additional attributes that are needed to identify
+   the product. These must be passed via an array.
+
+In addition to the five indexes above, there are two reserved words:
+rowid and subtotal. These are used internally by the Cart class, so
+please do NOT use those words as index names when inserting data into
+the cart.
+
+Your array may contain additional data. Anything you include in your
+array will be stored in the session. However, it is best to standardize
+your data among all your products in order to make displaying the
+information in a table easier.
+
+The insert() method will return the $rowid if you successfully insert a
+single item.
+
+Adding Multiple Items to The Cart
+=================================
+
+By using a multi-dimensional array, as shown below, it is possible to
+add multiple products to the cart in one action. This is useful in cases
+where you wish to allow people to select from among several items on the
+same page.
+
+::
+
+	$data = array(
+	               array(
+	                       'id'      => 'sku_123ABC',
+	                       'qty'     => 1,
+	                       'price'   => 39.95,
+	                       'name'    => 'T-Shirt',
+	                       'options' => array('Size' => 'L', 'Color' => 'Red')
+	                    ),
+	               array(
+	                       'id'      => 'sku_567ZYX',
+	                       'qty'     => 1,
+	                       'price'   => 9.95,
+	                       'name'    => 'Coffee Mug'
+	                    ),
+	               array(
+	                       'id'      => 'sku_965QRS',
+	                       'qty'     => 1,
+	                       'price'   => 29.95,
+	                       'name'    => 'Shot Glass'
+	                    )
+	            );
+
+	$this->cart->insert($data);
+
+Displaying the Cart
+===================
+
+To display the cart you will create a :doc:`view
+file </general/views>` with code similar to the one shown below.
+
+Please note that this example uses the :doc:`form
+helper </helpers/form_helper>`.
+
+::
+
+	<?php echo form_open('path/to/controller/update/function'); ?>
+
+	<table cellpadding="6" cellspacing="1" style="width:100%" border="0">
+
+	<tr>
+	  <th>QTY</th>
+	  <th>Item Description</th>
+	  <th style="text-align:right">Item Price</th>
+	  <th style="text-align:right">Sub-Total</th>
+	</tr>
+
+	<?php $i = 1; ?>
+
+	<?php foreach ($this->cart->contents() as $items): ?>
+
+		<?php echo form_hidden($i.'[rowid]', $items['rowid']); ?>
+
+		<tr>
+		  <td><?php echo form_input(array('name' => $i.'[qty]', 'value' => $items['qty'], 'maxlength' => '3', 'size' => '5')); ?></td>
+		  <td>
+			<?php echo $items['name']; ?>
+
+				<?php if ($this->cart->has_options($items['rowid']) == TRUE): ?>
+
+					<p>
+						<?php foreach ($this->cart->product_options($items['rowid']) as $option_name => $option_value): ?>
+
+							<strong><?php echo $option_name; ?>:</strong> <?php echo $option_value; ?><br />
+
+						<?php endforeach; ?>
+					</p>
+
+				<?php endif; ?>
+
+		  </td>
+		  <td style="text-align:right"><?php echo $this->cart->format_number($items['price']); ?></td>
+		  <td style="text-align:right">$<?php echo $this->cart->format_number($items['subtotal']); ?></td>
+		</tr>
+
+	<?php $i++; ?>
+
+	<?php endforeach; ?>
+
+	<tr>
+	  <td colspan="2"> </td>
+	  <td class="right"><strong>Total</strong></td>
+	  <td class="right">$<?php echo $this->cart->format_number($this->cart->total()); ?></td>
+	</tr>
+
+	</table>
+
+	<p><?php echo form_submit('', 'Update your Cart'); ?></p>
+	
+Updating The Cart
+=================
+
+To update the information in your cart, you must pass an array
+containing the Row ID and quantity to the $this->cart->update()
+function:
+
+.. note:: If the quantity is set to zero, the item will be removed from
+	the cart.
+
+::
+
+	$data = array(
+	               'rowid' => 'b99ccdf16028f015540f341130b6d8ec',
+	               'qty'   => 3
+	            );
+
+	$this->cart->update($data); 
+
+	// Or a multi-dimensional array
+
+	$data = array(
+	               array(
+	                       'rowid'   => 'b99ccdf16028f015540f341130b6d8ec',
+	                       'qty'     => 3
+	                    ),
+	               array(
+	                       'rowid'   => 'xw82g9q3r495893iajdh473990rikw23',
+	                       'qty'     => 4
+	                    ),
+	               array(
+	                       'rowid'   => 'fh4kdkkkaoe30njgoe92rkdkkobec333',
+	                       'qty'     => 2
+	                    )
+	            );
+
+	$this->cart->update($data);
+
+What is a Row ID?
+*****************
+
+The row ID is a unique identifier that is
+generated by the cart code when an item is added to the cart. The reason
+a unique ID is created is so that identical products with different
+options can be managed by the cart.
+
+For example, let's say someone buys two identical t-shirts (same product
+ID), but in different sizes. The product ID (and other attributes) will
+be identical for both sizes because it's the same shirt. The only
+difference will be the size. The cart must therefore have a means of
+identifying this difference so that the two sizes of shirts can be
+managed independently. It does so by creating a unique "row ID" based on
+the product ID and any options associated with it.
+
+In nearly all cases, updating the cart will be something the user does
+via the "view cart" page, so as a developer, it is unlikely that you
+will ever have to concern yourself with the "row ID", other then making
+sure your "view cart" page contains this information in a hidden form
+field, and making sure it gets passed to the update function when the
+update form is submitted. Please examine the construction of the "view
+cart" page above for more information.
+
+
+Function Reference
+==================
+
+$this->cart->insert();
+**********************
+
+Permits you to add items to the shopping cart, as outlined above.
+
+$this->cart->update();
+**********************
+
+Permits you to update items in the shopping cart, as outlined above.
+
+$this->cart->total();
+*********************
+
+Displays the total amount in the cart.
+
+$this->cart->total_items();
+****************************
+
+Displays the total number of items in the cart.
+
+$this->cart->contents();
+************************
+
+Returns an array containing everything in the cart.
+
+$this->cart->has_options(rowid);
+*********************************
+
+Returns TRUE (boolean) if a particular row in the cart contains options.
+This function is designed to be used in a loop with
+$this->cart->contents(), since you must pass the rowid to this function,
+as shown in the Displaying the Cart example above.
+
+$this->cart->product_options(rowid);
+*************************************
+
+Returns an array of options for a particular product. This function is
+designed to be used in a loop with $this->cart->contents(), since you
+must pass the rowid to this function, as shown in the Displaying the
+Cart example above.
+
+$this->cart->destroy();
+***********************
+
+Permits you to destroy the cart. This function will likely be called
+when you are finished processing the customer's order.
diff --git a/user_guide_src/source/libraries/config.rst b/user_guide_src/source/libraries/config.rst
new file mode 100644
index 000000000..c81cad7b3
--- /dev/null
+++ b/user_guide_src/source/libraries/config.rst
@@ -0,0 +1,181 @@
+############
+Config Class
+############
+
+The Config class provides a means to retrieve configuration preferences.
+These preferences can come from the default config file
+(application/config/config.php) or from your own custom config files.
+
+.. note:: This class is initialized automatically by the system so there
+	is no need to do it manually.
+
+.. contents:: Page Contents
+
+Anatomy of a Config File
+========================
+
+By default, CodeIgniter has one primary config file, located at
+application/config/config.php. If you open the file using your text
+editor you'll see that config items are stored in an array called
+$config.
+
+You can add your own config items to this file, or if you prefer to keep
+your configuration items separate (assuming you even need config items),
+simply create your own file and save it in config folder.
+
+.. note:: If you do create your own config files use the same format as
+	the primary one, storing your items in an array called $config.
+	CodeIgniter will intelligently manage these files so there will be no
+	conflict even though the array has the same name (assuming an array
+	index is not named the same as another).
+
+Loading a Config File
+=====================
+
+.. note::
+	CodeIgniter automatically loads the primary config file
+	(application/config/config.php), so you will only need to load a config
+	file if you have created your own.
+
+There are two ways to load a config file:
+
+Manual Loading
+**************
+
+To load one of your custom config files you will use the following
+function within the :doc:`controller </general/controllers>` that
+needs it::
+
+	$this->config->load('filename');
+
+Where filename is the name of your config file, without the .php file
+extension.
+
+If you need to load multiple config files normally they will be
+merged into one master config array. Name collisions can occur,
+however, if you have identically named array indexes in different
+config files. To avoid collisions you can set the second parameter to
+TRUE and each config file will be stored in an array index
+corresponding to the name of the config file. Example::
+
+	// Stored in an array with this prototype: $this->config['blog_settings'] = $config
+	$this->config->load('blog_settings', TRUE);
+
+Please see the section entitled Fetching Config Items below to learn
+how to retrieve config items set this way.
+
+The third parameter allows you to suppress errors in the event that a
+config file does not exist::
+
+	$this->config->load('blog_settings', FALSE, TRUE);
+
+Auto-loading
+************
+
+If you find that you need a particular config file globally, you can
+have it loaded automatically by the system. To do this, open the
+**autoload.php** file, located at application/config/autoload.php,
+and add your config file as indicated in the file.
+
+
+Fetching Config Items
+=====================
+
+To retrieve an item from your config file, use the following function::
+
+	$this->config->item('item name');
+
+Where item name is the $config array index you want to retrieve. For
+example, to fetch your language choice you'll do this::
+
+	$lang = $this->config->item('language');
+
+The function returns FALSE (boolean) if the item you are trying to fetch
+does not exist.
+
+If you are using the second parameter of the $this->config->load
+function in order to assign your config items to a specific index you
+can retrieve it by specifying the index name in the second parameter of
+the $this->config->item() function. Example::
+
+	// Loads a config file named blog_settings.php and assigns it to an index named "blog_settings"
+	$this->config->load('blog_settings', TRUE);
+
+	// Retrieve a config item named site_name contained within the blog_settings array
+	$site_name = $this->config->item('site_name', 'blog_settings');
+
+	// An alternate way to specify the same item:
+	$blog_config = $this->config->item('blog_settings');
+	$site_name = $blog_config['site_name'];
+
+Setting a Config Item
+=====================
+
+If you would like to dynamically set a config item or change an existing
+one, you can do so using::
+
+	$this->config->set_item('item_name', 'item_value');
+
+Where item_name is the $config array index you want to change, and
+item_value is its value.
+
+.. _config-environments:
+
+Environments
+============
+
+You may load different configuration files depending on the current
+environment. The ENVIRONMENT constant is defined in index.php, and is
+described in detail in the :doc:`Handling
+Environments </general/environments>` section.
+
+To create an environment-specific configuration file, create or copy a
+configuration file in application/config/{ENVIRONMENT}/{FILENAME}.php
+
+For example, to create a production-only config.php, you would:
+
+#. Create the directory application/config/production/
+#. Copy your existing config.php into the above directory
+#. Edit application/config/production/config.php so it contains your
+   production settings
+
+When you set the ENVIRONMENT constant to 'production', the settings for
+your new production-only config.php will be loaded.
+
+You can place the following configuration files in environment-specific
+folders:
+
+-  Default CodeIgniter configuration files
+-  Your own custom configuration files
+
+.. note::
+	CodeIgniter always tries to load the configuration files for
+	the current environment first. If the file does not exist, the global
+	config file (i.e., the one in application/config/) is loaded. This means
+	you are not obligated to place **all** of your configuration files in an
+	environment folder − only the files that change per environment.
+
+Helper Functions
+================
+
+The config class has the following helper functions:
+
+$this->config->site_url();
+***************************
+
+This function retrieves the URL to your site, along with the "index"
+value you've specified in the config file.
+
+$this->config->base_url();
+***************************
+
+This function retrieves the URL to your site, plus an optional path such
+as to a stylesheet or image.
+
+The two functions above are normally accessed via the corresponding
+functions in the :doc:`URL Helper </helpers/url_helper>`.
+
+$this->config->system_url();
+*****************************
+
+This function retrieves the URL to your system folder.
diff --git a/user_guide_src/source/libraries/email.rst b/user_guide_src/source/libraries/email.rst
new file mode 100644
index 000000000..759899242
--- /dev/null
+++ b/user_guide_src/source/libraries/email.rst
@@ -0,0 +1,257 @@
+###########
+Email Class
+###########
+
+CodeIgniter's robust Email Class supports the following features:
+
+-  Multiple Protocols: Mail, Sendmail, and SMTP
+-  TLS and SSL Encryption for SMTP
+-  Multiple recipients
+-  CC and BCCs
+-  HTML or Plaintext email
+-  Attachments
+-  Word wrapping
+-  Priorities
+-  BCC Batch Mode, enabling large email lists to be broken into small
+   BCC batches.
+-  Email Debugging tools
+
+Sending Email
+=============
+
+Sending email is not only simple, but you can configure it on the fly or
+set your preferences in a config file.
+
+Here is a basic example demonstrating how you might send email. Note:
+This example assumes you are sending the email from one of your
+:doc:`controllers <../general/controllers>`.
+
+::
+
+	$this->load->library('email');
+
+	$this->email->from('your@example.com', 'Your Name');
+	$this->email->to('someone@example.com'); 
+	$this->email->cc('another@another-example.com'); 
+	$this->email->bcc('them@their-example.com'); 
+
+	$this->email->subject('Email Test');
+	$this->email->message('Testing the email class.');	
+
+	$this->email->send();
+
+	echo $this->email->print_debugger();
+
+Setting Email Preferences
+=========================
+
+There are 17 different preferences available to tailor how your email
+messages are sent. You can either set them manually as described here,
+or automatically via preferences stored in your config file, described
+below:
+
+Preferences are set by passing an array of preference values to the
+email initialize function. Here is an example of how you might set some
+preferences::
+
+	$config['protocol'] = 'sendmail';
+	$config['mailpath'] = '/usr/sbin/sendmail';
+	$config['charset'] = 'iso-8859-1';
+	$config['wordwrap'] = TRUE;
+
+	$this->email->initialize($config);
+
+.. note:: Most of the preferences have default values that will be used
+	if you do not set them.
+
+Setting Email Preferences in a Config File
+------------------------------------------
+
+If you prefer not to set preferences using the above method, you can
+instead put them into a config file. Simply create a new file called the
+email.php, add the $config array in that file. Then save the file at
+config/email.php and it will be used automatically. You will NOT need to
+use the $this->email->initialize() function if you save your preferences
+in a config file.
+
+Email Preferences
+=================
+
+The following is a list of all the preferences that can be set when
+sending email.
+
+=================== ====================== ============================ =======================================================================
+Preference          Default Value          Options                      Description
+=================== ====================== ============================ =======================================================================
+**useragent**       CodeIgniter            None                         The "user agent".
+**protocol**        mail                   mail, sendmail, or smtp      The mail sending protocol.
+**mailpath**        /usr/sbin/sendmail     None                         The server path to Sendmail. 
+**smtp_host**       No Default             None                         SMTP Server Address.
+**smtp_user**       No Default             None                         SMTP Username.
+**smtp_pass**       No Default             None                         SMTP Password.
+**smtp_port**       25                     None                         SMTP Port.
+**smtp_timeout**    5                      None                         SMTP Timeout (in seconds).
+**smtp_crypto**     No Default             tls or ssl                   SMTP Encryption
+**wordwrap**        TRUE                   TRUE or FALSE (boolean)      Enable word-wrap.
+**wrapchars**       76                                                  Character count to wrap at.
+**mailtype**        text                   text or html                 Type of mail. If you send HTML email you must send it as a complete web
+                                                                        page. Make sure you don't have any relative links or relative image
+                                                                        paths otherwise they will not work.
+**charset**         utf-8                                               Character set (utf-8, iso-8859-1, etc.).
+**validate**        FALSE                  TRUE or FALSE (boolean)      Whether to validate the email address.
+**priority**        3                      1, 2, 3, 4, 5                Email Priority. 1 = highest. 5 = lowest. 3 = normal.
+**crlf**            \\n                    "\\r\\n" or "\\n" or "\\r"   Newline character. (Use "\\r\\n" to comply with RFC 822).
+**newline**         \\n                    "\\r\\n" or "\\n" or "\\r"   Newline character. (Use "\\r\\n" to comply with RFC 822).
+**bcc_batch_mode**  FALSE                  TRUE or FALSE (boolean)      Enable BCC Batch Mode.
+**bcc_batch_size**  200                    None                         Number of emails in each BCC batch.
+=================== ====================== ============================ =======================================================================
+
+Email Function Reference
+========================
+
+$this->email->from()
+--------------------
+
+Sets the email address and name of the person sending the email::
+
+	$this->email->from('you@example.com', 'Your Name');
+
+$this->email->reply_to()
+-------------------------
+
+Sets the reply-to address. If the information is not provided the
+information in the "from" function is used. Example::
+
+	$this->email->reply_to('you@example.com', 'Your Name');
+
+$this->email->to()
+------------------
+
+Sets the email address(s) of the recipient(s). Can be a single email, a
+comma-delimited list or an array::
+
+	$this->email->to('someone@example.com');
+
+::
+
+	$this->email->to('one@example.com, two@example.com, three@example.com');
+
+::
+
+	$list = array('one@example.com', 'two@example.com', 'three@example.com');
+
+	$this->email->to($list);
+
+$this->email->cc()
+------------------
+
+Sets the CC email address(s). Just like the "to", can be a single email,
+a comma-delimited list or an array.
+
+$this->email->bcc()
+-------------------
+
+Sets the BCC email address(s). Just like the "to", can be a single
+email, a comma-delimited list or an array.
+
+$this->email->subject()
+-----------------------
+
+Sets the email subject::
+
+	$this->email->subject('This is my subject');
+
+$this->email->message()
+-----------------------
+
+Sets the email message body::
+
+	$this->email->message('This is my message');
+
+$this->email->set_alt_message()
+---------------------------------
+
+Sets the alternative email message body::
+
+	$this->email->set_alt_message('This is the alternative message');
+
+This is an optional message string which can be used if you send HTML
+formatted email. It lets you specify an alternative message with no HTML
+formatting which is added to the header string for people who do not
+accept HTML email. If you do not set your own message CodeIgniter will
+extract the message from your HTML email and strip the tags.
+
+$this->email->clear()
+---------------------
+
+Initializes all the email variables to an empty state. This function is
+intended for use if you run the email sending function in a loop,
+permitting the data to be reset between cycles.
+
+::
+
+	foreach ($list as $name => $address)
+	{
+	    $this->email->clear();
+
+	    $this->email->to($address);
+	    $this->email->from('your@example.com');
+	    $this->email->subject('Here is your info '.$name);
+	    $this->email->message('Hi '.$name.' Here is the info you requested.');
+	    $this->email->send();
+	}
+
+If you set the parameter to TRUE any attachments will be cleared as
+well::
+
+	$this->email->clear(TRUE);
+
+$this->email->send()
+--------------------
+
+The Email sending function. Returns boolean TRUE or FALSE based on
+success or failure, enabling it to be used conditionally::
+
+	if ( ! $this->email->send())
+	{
+	    // Generate error
+	}
+
+$this->email->attach()
+----------------------
+
+Enables you to send an attachment. Put the file path/name in the first
+parameter. Note: Use a file path, not a URL. For multiple attachments
+use the function multiple times. For example::
+
+	$this->email->attach('/path/to/photo1.jpg');
+	$this->email->attach('/path/to/photo2.jpg');
+	$this->email->attach('/path/to/photo3.jpg');
+
+	$this->email->send();
+
+$this->email->print_debugger()
+-------------------------------
+
+Returns a string containing any server messages, the email headers, and
+the email messsage. Useful for debugging.
+
+Overriding Word Wrapping
+========================
+
+If you have word wrapping enabled (recommended to comply with RFC 822)
+and you have a very long link in your email it can get wrapped too,
+causing it to become un-clickable by the person receiving it.
+CodeIgniter lets you manually override word wrapping within part of your
+message like this::
+
+	The text of your email that
+	gets wrapped normally.
+
+	{unwrap}http://example.com/a_long_link_that_should_not_be_wrapped.html{/unwrap}
+
+	More text that will be
+	wrapped normally.
+	
+
+Place the item you do not want word-wrapped between: {unwrap} {/unwrap}
diff --git a/user_guide_src/source/libraries/encryption.rst b/user_guide_src/source/libraries/encryption.rst
new file mode 100644
index 000000000..80b45e4d7
--- /dev/null
+++ b/user_guide_src/source/libraries/encryption.rst
@@ -0,0 +1,179 @@
+################
+Encryption Class
+################
+
+The Encryption Class provides two-way data encryption. It uses a scheme
+that either compiles the message using a randomly hashed bitwise XOR
+encoding scheme, or is encrypted using the Mcrypt library. If Mcrypt is
+not available on your server the encoded message will still provide a
+reasonable degree of security for encrypted sessions or other such
+"light" purposes. If Mcrypt is available, you'll be provided with a high
+degree of security appropriate for storage.
+
+Setting your Key
+================
+
+A *key* is a piece of information that controls the cryptographic
+process and permits an encrypted string to be decoded. In fact, the key
+you chose will provide the **only** means to decode data that was
+encrypted with that key, so not only must you choose the key carefully,
+you must never change it if you intend use it for persistent data.
+
+It goes without saying that you should guard your key carefully. Should
+someone gain access to your key, the data will be easily decoded. If
+your server is not totally under your control it's impossible to ensure
+key security so you may want to think carefully before using it for
+anything that requires high security, like storing credit card numbers.
+
+To take maximum advantage of the encryption algorithm, your key should
+be 32 characters in length (128 bits). The key should be as random a
+string as you can concoct, with numbers and uppercase and lowercase
+letters. Your key should **not** be a simple text string. In order to be
+cryptographically secure it needs to be as random as possible.
+
+Your key can be either stored in your **application/config/config.php**, or
+you can design your own storage mechanism and pass the key dynamically
+when encoding/decoding.
+
+To save your key to your **application/config/config.php**, open the file
+and set::
+
+	$config['encryption_key'] = "YOUR KEY";
+
+Message Length
+==============
+
+It's important for you to know that the encoded messages the encryption
+function generates will be approximately 2.6 times longer than the
+original message. For example, if you encrypt the string "my super
+secret data", which is 21 characters in length, you'll end up with an
+encoded string that is roughly 55 characters (we say "roughly" because
+the encoded string length increments in 64 bit clusters, so it's not
+exactly linear). Keep this information in mind when selecting your data
+storage mechanism. Cookies, for example, can only hold 4K of
+information.
+
+Initializing the Class
+======================
+
+Like most other classes in CodeIgniter, the Encryption class is
+initialized in your controller using the **$this->load->library** function::
+
+	$this->load->library('encrypt');
+
+Once loaded, the Encrypt library object will be available using:
+$this->encrypt
+
+$this->encrypt->encode()
+========================
+
+Performs the data encryption and returns it as a string. Example::
+
+	$msg = 'My secret message';
+
+	$encrypted_string = $this->encrypt->encode($msg);
+	
+
+You can optionally pass your encryption key via the second parameter if
+you don't want to use the one in your config file::
+
+	$msg = 'My secret message';
+	$key = 'super-secret-key';
+
+	$encrypted_string = $this->encrypt->encode($msg, $key);
+
+$this->encrypt->decode()
+========================
+
+Decrypts an encoded string. Example::
+
+	$encrypted_string = 'APANtByIGI1BpVXZTJgcsAG8GZl8pdwwa84';
+
+	$plaintext_string = $this->encrypt->decode($encrypted_string);
+
+You can optionally pass your encryption key via the second parameter if
+you don't want to use the one in your config file::
+
+	$msg = 'My secret message';
+	$key = 'super-secret-key';
+
+	$encrypted_string = $this->encrypt->decode($msg, $key);
+
+$this->encrypt->set_cipher();
+==============================
+
+Permits you to set an Mcrypt cipher. By default it uses
+**MCRYPT_RIJNDAEL_256**. Example::
+
+	$this->encrypt->set_cipher(MCRYPT_BLOWFISH);
+
+Please visit php.net for a list of `available
+ciphers <http://php.net/mcrypt>`_.
+
+If you'd like to manually test whether your server supports Mcrypt you
+can use::
+
+	echo ( ! function_exists('mcrypt_encrypt')) ? 'Nope' : 'Yup';
+
+$this->encrypt->set_mode();
+============================
+
+Permits you to set an Mcrypt mode. By default it uses **MCRYPT_MODE_CBC**.
+Example::
+
+	$this->encrypt->set_mode(MCRYPT_MODE_CFB);
+
+Please visit php.net for a list of `available
+modes <http://php.net/mcrypt>`_.
+
+$this->encrypt->sha1();
+=======================
+
+SHA1 encoding function. Provide a string and it will return a 160 bit
+one way hash. Note: SHA1, just like MD5 is non-decodable. Example::
+
+	$hash = $this->encrypt->sha1('Some string');
+
+Many PHP installations have SHA1 support by default so if all you need
+is to encode a hash it's simpler to use the native function::
+
+	$hash = sha1('Some string');
+
+If your server does not support SHA1 you can use the provided function.
+
+$this->encrypt->encode_from_legacy($orig_data, $legacy_mode = MCRYPT_MODE_ECB, $key = '');
+==========================================================================================
+
+Enables you to re-encode data that was originally encrypted with
+CodeIgniter 1.x to be compatible with the Encryption library in
+CodeIgniter 2.x. It is only necessary to use this method if you have
+encrypted data stored permanently such as in a file or database and are
+on a server that supports Mcrypt. "Light" use encryption such as
+encrypted session data or transitory encrypted flashdata require no
+intervention on your part. However, existing encrypted Sessions will be
+destroyed since data encrypted prior to 2.x will not be decoded.
+
+.. important::
+	**Why only a method to re-encode the data instead of maintaining legacy
+	methods for both encoding and decoding?** The algorithms in the
+	Encryption library have improved in CodeIgniter 2.x both for performance
+	and security, and we do not wish to encourage continued use of the older
+	methods. You can of course extend the Encryption library if you wish and
+	replace the new methods with the old and retain seamless compatibility
+	with CodeIgniter 1.x encrypted data, but this a decision that a
+	developer should make cautiously and deliberately, if at all.
+
+::
+
+	$new_data = $this->encrypt->encode_from_legacy($old_encrypted_string);
+
+======================	===============	 =======================================================================
+Parameter		 Default	  Description
+======================	===============  =======================================================================
+**$orig_data**		n/a 		 The original encrypted data from CodeIgniter 1.x's Encryption library
+**$legacy_mode**	MCRYPT_MODE_ECB	 The Mcrypt mode that was used to generate the original encrypted data.
+					 CodeIgniter 1.x's default was MCRYPT_MODE_ECB, and it will assume that
+					 to be the case unless overridden by this parameter.
+**$key**		n/a 		 The encryption key. This it typically specified in your config file as
+					 outlined above.
+======================	===============	 =======================================================================
\ No newline at end of file
diff --git a/user_guide_src/source/libraries/file_uploading.rst b/user_guide_src/source/libraries/file_uploading.rst
new file mode 100644
index 000000000..90efca95d
--- /dev/null
+++ b/user_guide_src/source/libraries/file_uploading.rst
@@ -0,0 +1,327 @@
+####################
+File Uploading Class
+####################
+
+CodeIgniter's File Uploading Class permits files to be uploaded. You can
+set various preferences, restricting the type and size of the files.
+
+***********
+The Process
+***********
+
+Uploading a file involves the following general process:
+
+-  An upload form is displayed, allowing a user to select a file and
+   upload it.
+-  When the form is submitted, the file is uploaded to the destination
+   you specify.
+-  Along the way, the file is validated to make sure it is allowed to be
+   uploaded based on the preferences you set.
+-  Once uploaded, the user will be shown a success message.
+
+To demonstrate this process here is brief tutorial. Afterward you'll
+find reference information.
+
+Creating the Upload Form
+========================
+
+Using a text editor, create a form called upload_form.php. In it, place
+this code and save it to your applications/views/ folder::
+
+	<html>
+	<head>
+	<title>Upload Form</title>
+	</head>
+	<body>
+
+	<?php echo $error;?>
+
+	<?php echo form_open_multipart('upload/do_upload');?>
+
+	<input type="file" name="userfile" size="20" />
+
+	<br /><br />
+
+	<input type="submit" value="upload" />
+
+	</form>
+
+	</body>
+	</html>
+
+You'll notice we are using a form helper to create the opening form tag.
+File uploads require a multipart form, so the helper creates the proper
+syntax for you. You'll also notice we have an $error variable. This is
+so we can show error messages in the event the user does something
+wrong.
+
+The Success Page
+================
+
+Using a text editor, create a form called upload_success.php. In it,
+place this code and save it to your applications/views/ folder::
+
+	<html>
+	<head>
+	<title>Upload Form</title>
+	</head>
+	<body>
+
+	<h3>Your file was successfully uploaded!</h3>
+
+	<ul>
+	<?php foreach ($upload_data as $item => $value):?>
+	<li><?php echo $item;?>: <?php echo $value;?></li>
+	<?php endforeach; ?>
+	</ul>
+
+	<p><?php echo anchor('upload', 'Upload Another File!'); ?></p>
+
+	</body>
+	</html>
+
+The Controller
+==============
+
+Using a text editor, create a controller called upload.php. In it, place
+this code and save it to your applications/controllers/ folder::
+
+	<?php
+
+	class Upload extends CI_Controller {
+
+		function __construct()
+		{
+			parent::__construct();
+			$this->load->helper(array('form', 'url'));
+		}
+
+		function index()
+		{
+			$this->load->view('upload_form', array('error' => ' ' ));
+		}
+
+		function do_upload()
+		{
+			$config['upload_path'] = './uploads/';
+			$config['allowed_types'] = 'gif|jpg|png';
+			$config['max_size']	= '100';
+			$config['max_width']  = '1024';
+			$config['max_height']  = '768';
+
+			$this->load->library('upload', $config);
+
+			if ( ! $this->upload->do_upload())
+			{
+				$error = array('error' => $this->upload->display_errors());
+
+				$this->load->view('upload_form', $error);
+			}
+			else
+			{
+				$data = array('upload_data' => $this->upload->data());
+
+				$this->load->view('upload_success', $data);
+			}
+		}
+	}
+	?>
+
+The Upload Folder
+=================
+
+You'll need a destination folder for your uploaded images. Create a
+folder at the root of your CodeIgniter installation called uploads and
+set its file permissions to 777.
+
+Try it!
+=======
+
+To try your form, visit your site using a URL similar to this one::
+
+	example.com/index.php/upload/
+
+You should see an upload form. Try uploading an image file (either a
+jpg, gif, or png). If the path in your controller is correct it should
+work.
+
+***************
+Reference Guide
+***************
+
+Initializing the Upload Class
+=============================
+
+Like most other classes in CodeIgniter, the Upload class is initialized
+in your controller using the $this->load->library function::
+
+	$this->load->library('upload');
+
+Once the Upload class is loaded, the object will be available using:
+$this->upload
+
+Setting Preferences
+===================
+
+Similar to other libraries, you'll control what is allowed to be upload
+based on your preferences. In the controller you built above you set the
+following preferences::
+
+	$config['upload_path'] = './uploads/';
+	$config['allowed_types'] = 'gif|jpg|png';
+	$config['max_size']	= '100';
+	$config['max_width'] = '1024';
+	$config['max_height'] = '768';
+
+	$this->load->library('upload', $config);
+
+	// Alternately you can set preferences by calling the initialize function. Useful if you auto-load the class:
+	$this->upload->initialize($config);
+
+The above preferences should be fairly self-explanatory. Below is a
+table describing all available preferences.
+
+Preferences
+===========
+
+The following preferences are available. The default value indicates
+what will be used if you do not specify that preference.
+
+============================ ================= ======================= ======================================================================
+Preference                   Default Value     Options                 Description
+============================ ================= ======================= ======================================================================
+**upload_path**              None              None                    The path to the folder where the upload should be placed. The folder
+                                                                       must be writable and the path can be absolute or relative.
+**allowed_types**            None              None                    The mime types corresponding to the types of files you allow to be
+                                                                       uploaded. Usually the file extension can be used as the mime type.
+                                                                       Separate multiple types with a pipe.
+**file_name**                None              Desired file name       If set CodeIgniter will rename the uploaded file to this name. The
+                                                                       extension provided in the file name must also be an allowed file type.
+**overwrite**                FALSE             TRUE/FALSE (boolean)    If set to true, if a file with the same name as the one you are
+                                                                       uploading exists, it will be overwritten. If set to false, a number will
+                                                                       be appended to the filename if another with the same name exists.
+**max_size**                 0                 None                    The maximum size (in kilobytes) that the file can be. Set to zero for no
+                                                                       limit. Note: Most PHP installations have their own limit, as specified
+                                                                       in the php.ini file. Usually 2 MB (or 2048 KB) by default.
+**max_width**                0                 None                    The maximum width (in pixels) that the file can be. Set to zero for no
+                                                                       limit.
+**max_height**               0                 None                    The maximum height (in pixels) that the file can be. Set to zero for no
+                                                                       limit.
+**max_filename**             0                 None                    The maximum length that a file name can be. Set to zero for no limit.
+**max_filename_increment**   100               None                    When overwrite is set to FALSE, use this to set the maximum filename
+                                                                       increment for CodeIgniter to append to the filename.
+**encrypt_name**             FALSE             TRUE/FALSE (boolean)    If set to TRUE the file name will be converted to a random encrypted
+                                                                       string. This can be useful if you would like the file saved with a name
+                                                                       that can not be discerned by the person uploading it.
+**remove_spaces**            TRUE              TRUE/FALSE (boolean)    If set to TRUE, any spaces in the file name will be converted to
+                                                                       underscores. This is recommended.
+============================ ================= ======================= ======================================================================
+
+Setting preferences in a config file
+====================================
+
+If you prefer not to set preferences using the above method, you can
+instead put them into a config file. Simply create a new file called the
+upload.php, add the $config array in that file. Then save the file in:
+config/upload.php and it will be used automatically. You will NOT need
+to use the $this->upload->initialize function if you save your
+preferences in a config file.
+
+******************
+Function Reference
+******************
+
+The following functions are available
+
+$this->upload->do_upload()
+===========================
+
+Performs the upload based on the preferences you've set. Note: By
+default the upload routine expects the file to come from a form field
+called userfile, and the form must be a "multipart type::
+
+	<form method="post" action="some_action" enctype="multipart/form-data" />
+
+If you would like to set your own field name simply pass its value to
+the do_upload function::
+
+	$field_name = "some_field_name";
+	$this->upload->do_upload($field_name);
+
+$this->upload->display_errors()
+================================
+
+Retrieves any error messages if the do_upload() function returned
+false. The function does not echo automatically, it returns the data so
+you can assign it however you need.
+
+Formatting Errors
+*****************
+
+By default the above function wraps any errors within <p> tags. You can
+set your own delimiters like this::
+
+	$this->upload->display_errors('<p>', '</p>');
+
+$this->upload->data()
+=====================
+
+This is a helper function that returns an array containing all of the
+data related to the file you uploaded. Here is the array prototype::
+
+	Array
+	(
+	    [file_name]    => mypic.jpg
+	    [file_type]    => image/jpeg
+	    [file_path]    => /path/to/your/upload/
+	    [full_path]    => /path/to/your/upload/jpg.jpg
+	    [raw_name]     => mypic
+	    [orig_name]    => mypic.jpg
+	    [client_name]  => mypic.jpg
+	    [file_ext]     => .jpg
+	    [file_size]    => 22.2
+	    [is_image]     => 1
+	    [image_width]  => 800
+	    [image_height] => 600
+	    [image_type]   => jpeg
+	    [image_size_str] => width="800" height="200"
+	)
+
+Explanation
+***********
+
+Here is an explanation of the above array items.
+
+Item
+Description
+**file_name**
+The name of the file that was uploaded including the file extension.
+**file_type**
+The file's Mime type
+**file_path**
+The absolute server path to the file
+**full_path**
+The absolute server path including the file name
+**raw_name**
+The file name without the extension
+**orig_name**
+The original file name. This is only useful if you use the encrypted
+name option.
+**client_name**
+The file name as supplied by the client user agent, prior to any file
+name preparation or incrementing.
+**file_ext**
+The file extension with period
+**file_size**
+The file size in kilobytes
+**is_image**
+Whether the file is an image or not. 1 = image. 0 = not.
+**image_width**
+Image width.
+**image_height**
+Image height
+**image_type**
+Image type. Typically the file extension without the period.
+**image_size_str**
+A string containing the width and height. Useful to put into an image
+tag.
diff --git a/user_guide_src/source/libraries/form_validation.rst b/user_guide_src/source/libraries/form_validation.rst
new file mode 100644
index 000000000..e7875bc22
--- /dev/null
+++ b/user_guide_src/source/libraries/form_validation.rst
@@ -0,0 +1,1014 @@
+###############
+Form Validation
+###############
+
+CodeIgniter provides a comprehensive form validation and data prepping
+class that helps minimize the amount of code you'll write.
+
+.. contents:: Page Contents
+
+********
+Overview
+********
+
+Before explaining CodeIgniter's approach to data validation, let's
+describe the ideal scenario:
+
+#. A form is displayed.
+#. You fill it in and submit it.
+#. If you submitted something invalid, or perhaps missed a required
+   item, the form is redisplayed containing your data along with an
+   error message describing the problem.
+#. This process continues until you have submitted a valid form.
+
+On the receiving end, the script must:
+
+#. Check for required data.
+#. Verify that the data is of the correct type, and meets the correct
+   criteria. For example, if a username is submitted it must be
+   validated to contain only permitted characters. It must be of a
+   minimum length, and not exceed a maximum length. The username can't
+   be someone else's existing username, or perhaps even a reserved word.
+   Etc.
+#. Sanitize the data for security.
+#. Pre-format the data if needed (Does the data need to be trimmed? HTML
+   encoded? Etc.)
+#. Prep the data for insertion in the database.
+
+Although there is nothing terribly complex about the above process, it
+usually requires a significant amount of code, and to display error
+messages, various control structures are usually placed within the form
+HTML. Form validation, while simple to create, is generally very messy
+and tedious to implement.
+
+************************
+Form Validation Tutorial
+************************
+
+What follows is a "hands on" tutorial for implementing CodeIgniters Form
+Validation.
+
+In order to implement form validation you'll need three things:
+
+#. A :doc:`View <../general/views>` file containing a form.
+#. A View file containing a "success" message to be displayed upon
+   successful submission.
+#. A :doc:`controller <../general/controllers>` function to receive and
+   process the submitted data.
+
+Let's create those three things, using a member sign-up form as the
+example.
+
+The Form
+========
+
+Using a text editor, create a form called myform.php. In it, place this
+code and save it to your applications/views/ folder::
+
+	<html>
+	<head>
+	<title>My Form</title>
+	</head>
+	<body>
+
+	<?php echo validation_errors(); ?>
+
+	<?php echo form_open('form'); ?>
+
+	<h5>Username</h5>
+	<input type="text" name="username" value="" size="50" />
+
+	<h5>Password</h5>
+	<input type="text" name="password" value="" size="50" />
+
+	<h5>Password Confirm</h5>
+	<input type="text" name="passconf" value="" size="50" />
+
+	<h5>Email Address</h5>
+	<input type="text" name="email" value="" size="50" />
+
+	<div><input type="submit" value="Submit" /></div>
+
+	</form>
+
+	</body>
+	</html>
+
+The Success Page
+================
+
+Using a text editor, create a form called formsuccess.php. In it, place
+this code and save it to your applications/views/ folder::
+
+	<html>
+	<head>
+	<title>My Form</title>
+	</head>
+	<body>
+
+	<h3>Your form was successfully submitted!</h3>
+
+	<p><?php echo anchor('form', 'Try it again!'); ?></p>
+
+	</body>
+	</html>
+
+The Controller
+==============
+
+Using a text editor, create a controller called form.php. In it, place
+this code and save it to your applications/controllers/ folder::
+
+	<?php
+
+	class Form extends CI_Controller {
+
+		function index()
+		{
+			$this->load->helper(array('form', 'url'));
+
+			$this->load->library('form_validation');
+
+			if ($this->form_validation->run() == FALSE)
+			{
+				$this->load->view('myform');
+			}
+			else
+			{
+				$this->load->view('formsuccess');
+			}
+		}
+	}
+	?>
+
+Try it!
+=======
+
+To try your form, visit your site using a URL similar to this one::
+
+	example.com/index.php/form/
+
+If you submit the form you should simply see the form reload. That's
+because you haven't set up any validation rules yet.
+
+**Since you haven't told the Form Validation class to validate anything
+yet, it returns FALSE (boolean false) by default. The run() function
+only returns TRUE if it has successfully applied your rules without any
+of them failing.**
+
+Explanation
+===========
+
+You'll notice several things about the above pages:
+
+The form (myform.php) is a standard web form with a couple exceptions:
+
+#. It uses a form helper to create the form opening. Technically, this
+   isn't necessary. You could create the form using standard HTML.
+   However, the benefit of using the helper is that it generates the
+   action URL for you, based on the URL in your config file. This makes
+   your application more portable in the event your URLs change.
+#. At the top of the form you'll notice the following function call:
+   ::
+
+	<?php echo validation_errors(); ?>
+
+   This function will return any error messages sent back by the
+   validator. If there are no messages it returns an empty string.
+
+The controller (form.php) has one function: index(). This function
+initializes the validation class and loads the form helper and URL
+helper used by your view files. It also runs the validation routine.
+Based on whether the validation was successful it either presents the
+form or the success page.
+
+.. _setting-validation-rules:
+
+Setting Validation Rules
+========================
+
+CodeIgniter lets you set as many validation rules as you need for a
+given field, cascading them in order, and it even lets you prep and
+pre-process the field data at the same time. To set validation rules you
+will use the set_rules() function::
+
+	$this->form_validation->set_rules();
+
+The above function takes **three** parameters as input:
+
+#. The field name - the exact name you've given the form field.
+#. A "human" name for this field, which will be inserted into the error
+   message. For example, if your field is named "user" you might give it
+   a human name of "Username".
+#. The validation rules for this form field.
+
+.. note:: If you would like the field
+	name to be stored in a language file, please see :ref:`translating-field-names`.
+
+Here is an example. In your controller (form.php), add this code just
+below the validation initialization function::
+
+	$this->form_validation->set_rules('username', 'Username', 'required');
+	$this->form_validation->set_rules('password', 'Password', 'required');
+	$this->form_validation->set_rules('passconf', 'Password Confirmation', 'required');
+	$this->form_validation->set_rules('email', 'Email', 'required');
+
+Your controller should now look like this::
+
+	<?php
+
+	class Form extends CI_Controller {
+
+		function index()
+		{
+			$this->load->helper(array('form', 'url'));
+
+			$this->load->library('form_validation');
+
+			$this->form_validation->set_rules('username', 'Username', 'required');
+			$this->form_validation->set_rules('password', 'Password', 'required');
+			$this->form_validation->set_rules('passconf', 'Password Confirmation', 'required');
+			$this->form_validation->set_rules('email', 'Email', 'required');
+
+			if ($this->form_validation->run() == FALSE)
+			{
+				$this->load->view('myform');
+			}
+			else
+			{
+				$this->load->view('formsuccess');
+			}
+		}
+	}
+	?>
+
+Now submit the form with the fields blank and you should see the error
+messages. If you submit the form with all the fields populated you'll
+see your success page.
+
+.. note:: The form fields are not yet being re-populated with the data
+	when there is an error. We'll get to that shortly.
+
+Setting Rules Using an Array
+============================
+
+Before moving on it should be noted that the rule setting function can
+be passed an array if you prefer to set all your rules in one action. If
+you use this approach you must name your array keys as indicated::
+
+	$config = array(
+	               array(
+	                     'field'   => 'username', 
+	                     'label'   => 'Username', 
+	                     'rules'   => 'required'
+	                  ),
+	               array(
+	                     'field'   => 'password', 
+	                     'label'   => 'Password', 
+	                     'rules'   => 'required'
+	                  ),
+	               array(
+	                     'field'   => 'passconf', 
+	                     'label'   => 'Password Confirmation', 
+	                     'rules'   => 'required'
+	                  ),   
+	               array(
+	                     'field'   => 'email', 
+	                     'label'   => 'Email', 
+	                     'rules'   => 'required'
+	                  )
+	            );
+
+	$this->form_validation->set_rules($config);
+
+Cascading Rules
+===============
+
+CodeIgniter lets you pipe multiple rules together. Let's try it. Change
+your rules in the third parameter of rule setting function, like this::
+
+	$this->form_validation->set_rules('username', 'Username', 'required|min_length[5]|max_length[12]|is_unique[users.username]');
+	$this->form_validation->set_rules('password', 'Password', 'required|matches[passconf]');
+	$this->form_validation->set_rules('passconf', 'Password Confirmation', 'required');
+	$this->form_validation->set_rules('email', 'Email', 'required|valid_email|is_unique[users.email]');
+	
+
+The above code sets the following rules:
+
+#. The username field be no shorter than 5 characters and no longer than
+   12.
+#. The password field must match the password confirmation field.
+#. The email field must contain a valid email address.
+
+Give it a try! Submit your form without the proper data and you'll see
+new error messages that correspond to your new rules. There are numerous
+rules available which you can read about in the validation reference.
+
+Prepping Data
+=============
+
+In addition to the validation functions like the ones we used above, you
+can also prep your data in various ways. For example, you can set up
+rules like this::
+
+	$this->form_validation->set_rules('username', 'Username', 'trim|required|min_length[5]|max_length[12]|xss_clean');
+	$this->form_validation->set_rules('password', 'Password', 'trim|required|matches[passconf]|md5');
+	$this->form_validation->set_rules('passconf', 'Password Confirmation', 'trim|required');
+	$this->form_validation->set_rules('email', 'Email', 'trim|required|valid_email');
+
+In the above example, we are "trimming" the fields, converting the
+password to MD5, and running the username through the "xss_clean"
+function, which removes malicious data.
+
+**Any native PHP function that accepts one parameter can be used as a
+rule, like htmlspecialchars, trim, MD5, etc.**
+
+.. note:: You will generally want to use the prepping functions
+	**after** the validation rules so if there is an error, the original
+	data will be shown in the form.
+
+Re-populating the form
+======================
+
+Thus far we have only been dealing with errors. It's time to repopulate
+the form field with the submitted data. CodeIgniter offers several
+helper functions that permit you to do this. The one you will use most
+commonly is::
+
+	set_value('field name')
+
+Open your myform.php view file and update the **value** in each field
+using the set_value() function:
+
+**Don't forget to include each field name in the set_value()
+functions!**
+
+::
+
+	<html>
+	<head>
+	<title>My Form</title>
+	</head>
+	<body>
+
+	<?php echo validation_errors(); ?>
+
+	<?php echo form_open('form'); ?>
+
+	<h5>Username</h5>
+	<input type="text" name="username" value="<?php echo set_value('username'); ?>" size="50" />
+
+	<h5>Password</h5>
+	<input type="text" name="password" value="<?php echo set_value('password'); ?>" size="50" />
+
+	<h5>Password Confirm</h5>
+	<input type="text" name="passconf" value="<?php echo set_value('passconf'); ?>" size="50" />
+
+	<h5>Email Address</h5>
+	<input type="text" name="email" value="<?php echo set_value('email'); ?>" size="50" />
+
+	<div><input type="submit" value="Submit" /></div>
+
+	</form>
+
+	</body>
+	</html>
+
+Now reload your page and submit the form so that it triggers an error.
+Your form fields should now be re-populated
+
+.. note:: The :ref:`function-reference` section below
+	contains functions that permit you to re-populate <select> menus, radio
+	buttons, and checkboxes.
+
+**Important Note:** If you use an array as the name of a form field, you
+must supply it as an array to the function. Example::
+
+	<input type="text" name="colors[]" value="<?php echo set_value('colors[]'); ?>" size="50" />
+
+For more info please see the :ref:`using-arrays-as-field-names` section below.
+
+Callbacks: Your own Validation Functions
+========================================
+
+The validation system supports callbacks to your own validation
+functions. This permits you to extend the validation class to meet your
+needs. For example, if you need to run a database query to see if the
+user is choosing a unique username, you can create a callback function
+that does that. Let's create a example of this.
+
+In your controller, change the "username" rule to this::
+
+	$this->form_validation->set_rules('username', 'Username', 'callback_username_check');
+
+Then add a new function called username_check to your controller.
+Here's how your controller should now look::
+
+	<?php
+
+	class Form extends CI_Controller {
+
+		public function index()
+		{
+			$this->load->helper(array('form', 'url'));
+
+			$this->load->library('form_validation');
+
+			$this->form_validation->set_rules('username', 'Username', 'callback_username_check');
+			$this->form_validation->set_rules('password', 'Password', 'required');
+			$this->form_validation->set_rules('passconf', 'Password Confirmation', 'required');
+			$this->form_validation->set_rules('email', 'Email', 'required|is_unique[users.email]');
+
+			if ($this->form_validation->run() == FALSE)
+			{
+				$this->load->view('myform');
+			}
+			else
+			{
+				$this->load->view('formsuccess');
+			}
+		}
+
+		public function username_check($str)
+		{
+			if ($str == 'test')
+			{
+				$this->form_validation->set_message('username_check', 'The %s field can not be the word "test"');
+				return FALSE;
+			}
+			else
+			{
+				return TRUE;
+			}
+		}
+
+	}
+	?>
+
+Reload your form and submit it with the word "test" as the username. You
+can see that the form field data was passed to your callback function
+for you to process.
+
+To invoke a callback just put the function name in a rule, with
+"callback\_" as the rule **prefix**. If you need to receive an extra
+parameter in your callback function, just add it normally after the
+function name between square brackets, as in: "callback_foo**[bar]**",
+then it will be passed as the second argument of your callback function.
+
+.. note:: You can also process the form data that is passed to your
+	callback and return it. If your callback returns anything other than a
+	boolean TRUE/FALSE it is assumed that the data is your newly processed
+	form data.
+
+.. _setting-error-messages:
+
+Setting Error Messages
+======================
+
+All of the native error messages are located in the following language
+file: language/english/form_validation_lang.php
+
+To set your own custom message you can either edit that file, or use the
+following function::
+
+	$this->form_validation->set_message('rule', 'Error Message');
+
+Where rule corresponds to the name of a particular rule, and Error
+Message is the text you would like displayed.
+
+If you include %s in your error string, it will be replaced with the
+"human" name you used for your field when you set your rules.
+
+In the "callback" example above, the error message was set by passing
+the name of the function::
+
+	$this->form_validation->set_message('username_check')
+
+You can also override any error message found in the language file. For
+example, to change the message for the "required" rule you will do this::
+
+	$this->form_validation->set_message('required', 'Your custom message here');
+
+.. _translating-field-names:
+
+Translating Field Names
+=======================
+
+If you would like to store the "human" name you passed to the
+set_rules() function in a language file, and therefore make the name
+able to be translated, here's how:
+
+First, prefix your "human" name with lang:, as in this example::
+
+	 $this->form_validation->set_rules('first_name', 'lang:first_name', 'required');
+
+Then, store the name in one of your language file arrays (without the
+prefix)::
+
+	$lang['first_name'] = 'First Name';
+
+.. note:: If you store your array item in a language file that is not
+	loaded automatically by CI, you'll need to remember to load it in your
+	controller using::
+
+	$this->lang->load('file_name');
+
+See the :doc:`Language Class <language>` page for more info regarding
+language files.
+
+.. _changing-delimiters:
+
+Changing the Error Delimiters
+=============================
+
+By default, the Form Validation class adds a paragraph tag (<p>) around
+each error message shown. You can either change these delimiters
+globally or individually.
+
+#. **Changing delimiters Globally**
+   To globally change the error delimiters, in your controller function,
+   just after loading the Form Validation class, add this::
+
+      $this->form_validation->set_error_delimiters('<div class="error">', '</div>');
+
+   In this example, we've switched to using div tags.
+
+#. **Changing delimiters Individually**
+   Each of the two error generating functions shown in this tutorial can
+   be supplied their own delimiters as follows::
+
+      <?php echo form_error('field name', '<div class="error">', '</div>'); ?>
+
+   Or::
+
+      <?php echo validation_errors('<div class="error">', '</div>'); ?>
+
+
+Showing Errors Individually
+===========================
+
+If you prefer to show an error message next to each form field, rather
+than as a list, you can use the form_error() function.
+
+Try it! Change your form so that it looks like this::
+
+	<h5>Username</h5>
+	<?php echo form_error('username'); ?>
+	<input type="text" name="username" value="<?php echo set_value('username'); ?>" size="50" />
+
+	<h5>Password</h5>
+	<?php echo form_error('password'); ?>
+	<input type="text" name="password" value="<?php echo set_value('password'); ?>" size="50" />
+
+	<h5>Password Confirm</h5>
+	<?php echo form_error('passconf'); ?>
+	<input type="text" name="passconf" value="<?php echo set_value('passconf'); ?>" size="50" />
+
+	<h5>Email Address</h5>
+	<?php echo form_error('email'); ?>
+	<input type="text" name="email" value="<?php echo set_value('email'); ?>" size="50" />
+
+If there are no errors, nothing will be shown. If there is an error, the
+message will appear.
+
+**Important Note:** If you use an array as the name of a form field, you
+must supply it as an array to the function. Example::
+
+	<?php echo form_error('options[size]'); ?>
+	<input type="text" name="options[size]" value="<?php echo set_value("options[size]"); ?>" size="50" />
+
+For more info please see the :ref:`using-arrays-as-field-names` section below.
+
+.. _saving-groups:
+
+************************************************
+Saving Sets of Validation Rules to a Config File
+************************************************
+
+A nice feature of the Form Validation class is that it permits you to
+store all your validation rules for your entire application in a config
+file. You can organize these rules into "groups". These groups can
+either be loaded automatically when a matching controller/function is
+called, or you can manually call each set as needed.
+
+How to save your rules
+======================
+
+To store your validation rules, simply create a file named
+form_validation.php in your application/config/ folder. In that file
+you will place an array named $config with your rules. As shown earlier,
+the validation array will have this prototype::
+
+	$config = array(
+	               array(
+	                     'field'   => 'username', 
+	                     'label'   => 'Username', 
+	                     'rules'   => 'required'
+	                  ),
+	               array(
+	                     'field'   => 'password', 
+	                     'label'   => 'Password', 
+	                     'rules'   => 'required'
+	                  ),
+	               array(
+	                     'field'   => 'passconf', 
+	                     'label'   => 'Password Confirmation', 
+	                     'rules'   => 'required'
+	                  ),   
+	               array(
+	                     'field'   => 'email', 
+	                     'label'   => 'Email', 
+	                     'rules'   => 'required'
+	                  )
+	            );
+
+Your validation rule file will be loaded automatically and used when you
+call the run() function.
+
+Please note that you MUST name your array $config.
+
+Creating Sets of Rules
+======================
+
+In order to organize your rules into "sets" requires that you place them
+into "sub arrays". Consider the following example, showing two sets of
+rules. We've arbitrarily called these two rules "signup" and "email".
+You can name your rules anything you want::
+
+	$config = array(
+	                 'signup' => array(
+	                                    array(
+	                                            'field' => 'username',
+	                                            'label' => 'Username',
+	                                            'rules' => 'required'
+	                                         ),
+	                                    array(
+	                                            'field' => 'password',
+	                                            'label' => 'Password',
+	                                            'rules' => 'required'
+	                                         ),
+	                                    array(
+	                                            'field' => 'passconf',
+	                                            'label' => 'PasswordConfirmation',
+	                                            'rules' => 'required'
+	                                         ),
+	                                    array(
+	                                            'field' => 'email',
+	                                            'label' => 'Email',
+	                                            'rules' => 'required'
+	                                         )
+	                                    ),
+	                 'email' => array(
+	                                    array(
+	                                            'field' => 'emailaddress',
+	                                            'label' => 'EmailAddress',
+	                                            'rules' => 'required|valid_email'
+	                                         ),
+	                                    array(
+	                                            'field' => 'name',
+	                                            'label' => 'Name',
+	                                            'rules' => 'required|alpha'
+	                                         ),
+	                                    array(
+	                                            'field' => 'title',
+	                                            'label' => 'Title',
+	                                            'rules' => 'required'
+	                                         ),
+	                                    array(
+	                                            'field' => 'message',
+	                                            'label' => 'MessageBody',
+	                                            'rules' => 'required'
+	                                         )
+	                                    )                          
+	               );
+
+Calling a Specific Rule Group
+=============================
+
+In order to call a specific group you will pass its name to the run()
+function. For example, to call the signup rule you will do this::
+
+	if ($this->form_validation->run('signup') == FALSE)
+	{
+	   $this->load->view('myform');
+	}
+	else
+	{
+	   $this->load->view('formsuccess');
+	}
+
+Associating a Controller Function with a Rule Group
+===================================================
+
+An alternate (and more automatic) method of calling a rule group is to
+name it according to the controller class/function you intend to use it
+with. For example, let's say you have a controller named Member and a
+function named signup. Here's what your class might look like::
+
+	<?php
+
+	class Member extends CI_Controller {
+
+	   function signup()
+	   {      
+	      $this->load->library('form_validation');
+
+	      if ($this->form_validation->run() == FALSE)
+	      {
+	         $this->load->view('myform');
+	      }
+	      else
+	      {
+	         $this->load->view('formsuccess');
+	      }
+	   }
+	}
+	?>
+
+In your validation config file, you will name your rule group
+member/signup::
+
+	$config = array(
+	           'member/signup' => array(
+	                                    array(
+	                                            'field' => 'username',
+	                                            'label' => 'Username',
+	                                            'rules' => 'required'
+	                                         ),
+	                                    array(
+	                                            'field' => 'password',
+	                                            'label' => 'Password',
+	                                            'rules' => 'required'
+	                                         ),
+	                                    array(
+	                                            'field' => 'passconf',
+	                                            'label' => 'PasswordConfirmation',
+	                                            'rules' => 'required'
+	                                         ),
+	                                    array(
+	                                            'field' => 'email',
+	                                            'label' => 'Email',
+	                                            'rules' => 'required'
+	                                         )
+	                                    )
+	               );
+
+When a rule group is named identically to a controller class/function it
+will be used automatically when the run() function is invoked from that
+class/function.
+
+.. _using-arrays-as-field-names:
+
+***************************
+Using Arrays as Field Names
+***************************
+
+The Form Validation class supports the use of arrays as field names.
+Consider this example::
+
+	<input type="text" name="options[]" value="" size="50" />
+
+If you do use an array as a field name, you must use the EXACT array
+name in the :ref:`Helper Functions <helper-functions>` that require the
+field name, and as your Validation Rule field name.
+
+For example, to set a rule for the above field you would use::
+
+	$this->form_validation->set_rules('options[]', 'Options', 'required');
+
+Or, to show an error for the above field you would use::
+
+	<?php echo form_error('options[]'); ?>
+
+Or to re-populate the field you would use::
+
+	<input type="text" name="options[]" value="<?php echo set_value('options[]'); ?>" size="50" />
+
+You can use multidimensional arrays as field names as well. For example::
+
+	<input type="text" name="options[size]" value="" size="50" />
+
+Or even::
+
+	<input type="text" name="sports[nba][basketball]" value="" size="50" />
+
+As with our first example, you must use the exact array name in the
+helper functions::
+
+	<?php echo form_error('sports[nba][basketball]'); ?>
+
+If you are using checkboxes (or other fields) that have multiple
+options, don't forget to leave an empty bracket after each option, so
+that all selections will be added to the POST array::
+
+	<input type="checkbox" name="options[]" value="red" />
+	<input type="checkbox" name="options[]" value="blue" />
+	<input type="checkbox" name="options[]" value="green" />
+
+Or if you use a multidimensional array::
+
+	<input type="checkbox" name="options[color][]" value="red" />
+	<input type="checkbox" name="options[color][]" value="blue" />
+	<input type="checkbox" name="options[color][]" value="green" />
+
+When you use a helper function you'll include the bracket as well::
+
+	<?php echo form_error('options[color][]'); ?>
+
+
+**************
+Rule Reference
+**************
+
+The following is a list of all the native rules that are available to
+use:
+
+======================= ========== ============================================================================================= =======================
+Rule                    Parameter  Description                                                                                   Example
+======================= ========== ============================================================================================= =======================
+**required**            No         Returns FALSE if the form element is empty.                                                                          
+**matches**             Yes        Returns FALSE if the form element does not match the one in the parameter.                    matches[form_item]     
+**is_unique**           Yes        Returns FALSE if the form element is not unique to the                                        is_unique[table.field] 
+                                   table and field name in the parameter. is_unique[table.field]                                                        
+**max_length**          Yes        Returns FALSE if the form element is longer then the parameter value.                         max_length[12]         
+**exact_length**        Yes        Returns FALSE if the form element is not exactly the parameter value.                         exact_length[8]        
+**greater_than**        Yes        Returns FALSE if the form element is less than the parameter value or not numeric.            greater_than[8]        
+**less_than**           Yes        Returns FALSE if the form element is greater than the parameter value or not numeric.         less_than[8]           
+**alpha**               No         Returns FALSE if the form element contains anything other than alphabetical characters.                              
+**alpha_numeric**       No         Returns FALSE if the form element contains anything other than alpha-numeric characters.                             
+**alpha_dash**          No         Returns FALSE if the form element contains anything other than alpha-numeric characters,                             
+                                   underscores or dashes.                                                                                               
+**numeric**             No         Returns FALSE if the form element contains anything other than numeric characters.                                   
+**integer**             No         Returns FALSE if the form element contains anything other than an integer.                                           
+**decimal**             Yes        Returns FALSE if the form element is not exactly the parameter value.                                                
+**is_natural**          No         Returns FALSE if the form element contains anything other than a natural number:
+                                   0, 1, 2, 3, etc.
+**is_natural_no_zero**  No         Returns FALSE if the form element contains anything other than a natural
+                                   number, but not zero: 1, 2, 3, etc.
+**is_unique**           Yes        Returns FALSE if the form element is not unique in a database table.                          is_unique[table.field] 
+**valid_email**         No         Returns FALSE if the form element does not contain a valid email address.
+**valid_emails**        No         Returns FALSE if any value provided in a comma separated list is not a valid email.
+**valid_ip**            No         Returns FALSE if the supplied IP is not valid.
+**valid_base64**        No         Returns FALSE if the supplied string contains anything other than valid Base64 characters.
+======================= ========== ============================================================================================= =======================
+
+.. note:: These rules can also be called as discrete functions. For
+	example::
+
+		$this->form_validation->required($string);
+
+.. note:: You can also use any native PHP functions that permit one
+	parameter.
+
+******************
+Prepping Reference
+******************
+
+The following is a list of all the prepping functions that are available
+to use:
+
+==================== ========= ===================================================================================================
+Name                 Parameter Description
+==================== ========= ===================================================================================================
+**xss_clean**        No        Runs the data through the XSS filtering function, described in the :doc:`Input Class <input>` page.
+**prep_for_form**    No        Converts special characters so that HTML data can be shown in a form field without breaking it.
+**prep_url**         No        Adds "\http://" to URLs if missing.
+**strip_image_tags** No        Strips the HTML from image tags leaving the raw URL.
+**encode_php_tags**  No        Converts PHP tags to entities.
+==================== ========= ===================================================================================================
+
+.. note:: You can also use any native PHP functions that permit one
+	parameter, like trim, htmlspecialchars, urldecode, etc.
+
+.. _function-reference:
+
+******************
+Function Reference
+******************
+
+.. php:class:: Form_validation
+
+The following functions are intended for use in your controller
+functions.
+
+$this->form_validation->set_rules();
+======================================
+
+	.. php:method:: set_rules ($field, $label = '', $rules = '')
+
+		:param string $field: The field name
+		:param string $label: The field label
+		:param string $rules: The rules, seperated by a pipe "|"
+		:rtype: Object
+	
+		Permits you to set validation rules, as described in the tutorial
+		sections above:
+
+	-  :ref:`setting-validation-rules`
+	-  :ref:`saving-groups`
+
+$this->form_validation->run();
+===============================
+	
+	.. php:method:: run ($group = '')
+
+		:param string $group: The name of the validation group to run
+		:rtype: Boolean
+	
+		Runs the validation routines. Returns boolean TRUE on success and FALSE
+		on failure. You can optionally pass the name of the validation group via
+		the function, as described in: :ref:`saving-groups`
+
+$this->form_validation->set_message();
+========================================
+	
+	.. php:method:: set_message ($lang, $val = '')
+
+		:param string $lang: The rule the message is for
+		:param string $val: The message
+		:rtype: Object
+
+		Permits you to set custom error messages. See :ref:`setting-error-messages`
+
+.. _helper-functions:
+
+****************
+Helper Reference
+****************
+
+The following helper functions are available for use in the view files
+containing your forms. Note that these are procedural functions, so they
+**do not** require you to prepend them with $this->form_validation.
+
+form_error()
+=============
+
+Shows an individual error message associated with the field name
+supplied to the function. Example::
+
+	<?php echo form_error('username'); ?>
+
+The error delimiters can be optionally specified. See the
+:ref:`changing-delimiters` section above.
+
+validation_errors()
+====================
+
+Shows all error messages as a string: Example::
+
+	<?php echo validation_errors(); ?>
+
+The error delimiters can be optionally specified. See the 
+:ref:`changing-delimiters` section above.
+
+set_value()
+============
+
+Permits you to set the value of an input form or textarea. You must
+supply the field name via the first parameter of the function. The
+second (optional) parameter allows you to set a default value for the
+form. Example::
+
+	<input type="text" name="quantity" value="<?php echo set_value('quantity', '0'); ?>" size="50" />
+
+The above form will show "0" when loaded for the first time.
+
+set_select()
+=============
+
+If you use a <select> menu, this function permits you to display the
+menu item that was selected. The first parameter must contain the name
+of the select menu, the second parameter must contain the value of each
+item, and the third (optional) parameter lets you set an item as the
+default (use boolean TRUE/FALSE).
+
+Example::
+
+	<select name="myselect">
+	<option value="one" <?php echo set_select('myselect', 'one', TRUE); ?> >One</option>
+	<option value="two" <?php echo set_select('myselect', 'two'); ?> >Two</option>
+	<option value="three" <?php echo set_select('myselect', 'three'); ?> >Three</option>
+	</select>
+
+set_checkbox()
+===============
+
+Permits you to display a checkbox in the state it was submitted. The
+first parameter must contain the name of the checkbox, the second
+parameter must contain its value, and the third (optional) parameter
+lets you set an item as the default (use boolean TRUE/FALSE). Example::
+
+	<input type="checkbox" name="mycheck[]" value="1" <?php echo set_checkbox('mycheck[]', '1'); ?> />
+	<input type="checkbox" name="mycheck[]" value="2" <?php echo set_checkbox('mycheck[]', '2'); ?> />
+
+set_radio()
+============
+
+Permits you to display radio buttons in the state they were submitted.
+This function is identical to the **set_checkbox()** function above.
+
+::
+
+	<input type="radio" name="myradio" value="1" <?php echo  set_radio('myradio', '1', TRUE); ?> />
+	<input type="radio" name="myradio" value="2" <?php echo  set_radio('myradio', '2'); ?> />
+
diff --git a/user_guide_src/source/libraries/ftp.rst b/user_guide_src/source/libraries/ftp.rst
new file mode 100644
index 000000000..20b11a5c8
--- /dev/null
+++ b/user_guide_src/source/libraries/ftp.rst
@@ -0,0 +1,250 @@
+#########
+FTP Class
+#########
+
+CodeIgniter's FTP Class permits files to be transfered to a remote
+server. Remote files can also be moved, renamed, and deleted. The FTP
+class also includes a "mirroring" function that permits an entire local
+directory to be recreated remotely via FTP.
+
+.. note:: SFTP and SSL FTP protocols are not supported, only standard
+	FTP.
+
+**********************
+Initializing the Class
+**********************
+
+Like most other classes in CodeIgniter, the FTP class is initialized in
+your controller using the $this->load->library function::
+
+	$this->load->library('ftp');
+
+Once loaded, the FTP object will be available using: $this->ftp
+
+Usage Examples
+==============
+
+In this example a connection is opened to the FTP server, and a local
+file is read and uploaded in ASCII mode. The file permissions are set to
+755. Note: Setting permissions requires PHP 5.
+
+::
+
+	$this->load->library('ftp');
+
+	$config['hostname'] = 'ftp.example.com';
+	$config['username'] = 'your-username';
+	$config['password'] = 'your-password';
+	$config['debug']	= TRUE;
+
+	$this->ftp->connect($config);
+
+	$this->ftp->upload('/local/path/to/myfile.html', '/public_html/myfile.html', 'ascii', 0775);
+
+	$this->ftp->close();
+
+In this example a list of files is retrieved from the server.
+
+::
+
+	$this->load->library('ftp');
+
+	$config['hostname'] = 'ftp.example.com';
+	$config['username'] = 'your-username';
+	$config['password'] = 'your-password';
+	$config['debug']	= TRUE;
+
+	$this->ftp->connect($config);
+
+	$list = $this->ftp->list_files('/public_html/');
+
+	print_r($list);
+
+	$this->ftp->close();
+
+In this example a local directory is mirrored on the server.
+
+::
+
+	$this->load->library('ftp');
+
+	$config['hostname'] = 'ftp.example.com';
+	$config['username'] = 'your-username';
+	$config['password'] = 'your-password';
+	$config['debug']	= TRUE;
+
+	$this->ftp->connect($config);
+
+	$this->ftp->mirror('/path/to/myfolder/', '/public_html/myfolder/');
+
+	$this->ftp->close();
+
+******************
+Function Reference
+******************
+
+$this->ftp->connect()
+=====================
+
+Connects and logs into to the FTP server. Connection preferences are set
+by passing an array to the function, or you can store them in a config
+file.
+
+Here is an example showing how you set preferences manually::
+
+	$this->load->library('ftp');
+
+	$config['hostname'] = 'ftp.example.com';
+	$config['username'] = 'your-username';
+	$config['password'] = 'your-password';
+	$config['port']     = 21;
+	$config['passive']  = FALSE;
+	$config['debug']    = TRUE;
+
+	$this->ftp->connect($config);
+
+Setting FTP Preferences in a Config File
+****************************************
+
+If you prefer you can store your FTP preferences in a config file.
+Simply create a new file called the ftp.php, add the $config array in
+that file. Then save the file at config/ftp.php and it will be used
+automatically.
+
+Available connection options
+****************************
+
+-  **hostname** - the FTP hostname. Usually something like:
+   ftp.example.com
+-  **username** - the FTP username.
+-  **password** - the FTP password.
+-  **port** - The port number. Set to 21 by default.
+-  **debug** - TRUE/FALSE (boolean). Whether to enable debugging to
+   display error messages.
+-  **passive** - TRUE/FALSE (boolean). Whether to use passive mode.
+   Passive is set automatically by default.
+
+$this->ftp->upload()
+====================
+
+Uploads a file to your server. You must supply the local path and the
+remote path, and you can optionally set the mode and permissions.
+Example::
+
+	$this->ftp->upload('/local/path/to/myfile.html', '/public_html/myfile.html', 'ascii', 0775);
+
+**Mode options are:** ascii, binary, and auto (the default). If auto is
+used it will base the mode on the file extension of the source file.
+
+Permissions are available if you are running PHP 5 and can be passed as
+an octal value in the fourth parameter.
+
+$this->ftp->download()
+======================
+
+Downloads a file from your server. You must supply the remote path and
+the local path, and you can optionally set the mode. Example::
+
+	$this->ftp->download('/public_html/myfile.html', '/local/path/to/myfile.html', 'ascii');
+
+**Mode options are:** ascii, binary, and auto (the default). If auto is
+used it will base the mode on the file extension of the source file.
+
+Returns FALSE if the download does not execute successfully (including
+if PHP does not have permission to write the local file)
+
+$this->ftp->rename()
+====================
+
+Permits you to rename a file. Supply the source file name/path and the
+new file name/path.
+
+::
+
+	// Renames green.html to blue.html
+	$this->ftp->rename('/public_html/foo/green.html', '/public_html/foo/blue.html');
+
+$this->ftp->move()
+==================
+
+Lets you move a file. Supply the source and destination paths::
+
+	// Moves blog.html from "joe" to "fred"
+	$this->ftp->move('/public_html/joe/blog.html', '/public_html/fred/blog.html');
+
+Note: if the destination file name is different the file will be
+renamed.
+
+$this->ftp->delete_file()
+==========================
+
+Lets you delete a file. Supply the source path with the file name.
+
+::
+
+	 $this->ftp->delete_file('/public_html/joe/blog.html');
+
+$this->ftp->delete_dir()
+=========================
+
+Lets you delete a directory and everything it contains. Supply the
+source path to the directory with a trailing slash.
+
+**Important** Be VERY careful with this function. It will recursively
+delete **everything** within the supplied path, including sub-folders
+and all files. Make absolutely sure your path is correct. Try using the
+list_files() function first to verify that your path is correct.
+
+::
+
+	 $this->ftp->delete_dir('/public_html/path/to/folder/');
+
+$this->ftp->list_files()
+=========================
+
+Permits you to retrieve a list of files on your server returned as an
+array. You must supply the path to the desired directory.
+
+::
+
+	$list = $this->ftp->list_files('/public_html/');
+
+	print_r($list);
+
+$this->ftp->mirror()
+====================
+
+Recursively reads a local folder and everything it contains (including
+sub-folders) and creates a mirror via FTP based on it. Whatever the
+directory structure of the original file path will be recreated on the
+server. You must supply a source path and a destination path::
+
+	 $this->ftp->mirror('/path/to/myfolder/', '/public_html/myfolder/');
+
+$this->ftp->mkdir()
+===================
+
+Lets you create a directory on your server. Supply the path ending in
+the folder name you wish to create, with a trailing slash. Permissions
+can be set by passed an octal value in the second parameter (if you are
+running PHP 5).
+
+::
+
+	// Creates a folder named "bar"
+	$this->ftp->mkdir('/public_html/foo/bar/', DIR_WRITE_MODE);
+
+$this->ftp->chmod()
+===================
+
+Permits you to set file permissions. Supply the path to the file or
+folder you wish to alter permissions on::
+
+	// Chmod "bar" to 777
+	$this->ftp->chmod('/public_html/foo/bar/', DIR_WRITE_MODE);
+
+$this->ftp->close();
+====================
+
+Closes the connection to your server. It's recommended that you use this
+when you are finished uploading.
diff --git a/user_guide_src/source/libraries/image_lib.rst b/user_guide_src/source/libraries/image_lib.rst
new file mode 100644
index 000000000..300cbef31
--- /dev/null
+++ b/user_guide_src/source/libraries/image_lib.rst
@@ -0,0 +1,428 @@
+########################
+Image Manipulation Class
+########################
+
+CodeIgniter's Image Manipulation class lets you perform the following
+actions:
+
+-  Image Resizing
+-  Thumbnail Creation
+-  Image Cropping
+-  Image Rotating
+-  Image Watermarking
+
+All three major image libraries are supported: GD/GD2, NetPBM, and
+ImageMagick
+
+.. note:: Watermarking is only available using the GD/GD2 library. In
+	addition, even though other libraries are supported, GD is required in
+	order for the script to calculate the image properties. The image
+	processing, however, will be performed with the library you specify.
+
+**********************
+Initializing the Class
+**********************
+
+Like most other classes in CodeIgniter, the image class is initialized
+in your controller using the $this->load->library function::
+
+	$this->load->library('image_lib');
+
+Once the library is loaded it will be ready for use. The image library
+object you will use to call all functions is: $this->image_lib
+
+Processing an Image
+===================
+
+Regardless of the type of processing you would like to perform
+(resizing, cropping, rotation, or watermarking), the general process is
+identical. You will set some preferences corresponding to the action you
+intend to perform, then call one of four available processing functions.
+For example, to create an image thumbnail you'll do this::
+
+	$config['image_library'] = 'gd2';
+	$config['source_image']	= '/path/to/image/mypic.jpg';
+	$config['create_thumb'] = TRUE;
+	$config['maintain_ratio'] = TRUE;
+	$config['width']	 = 75;
+	$config['height']	= 50;
+
+	$this->load->library('image_lib', $config); 
+
+	$this->image_lib->resize();
+
+The above code tells the image_resize function to look for an image
+called *mypic.jpg* located in the source_image folder, then create a
+thumbnail that is 75 X 50 pixels using the GD2 image_library. Since the
+maintain_ratio option is enabled, the thumb will be as close to the
+target width and height as possible while preserving the original aspect
+ratio. The thumbnail will be called *mypic_thumb.jpg*
+
+.. note:: In order for the image class to be allowed to do any
+	processing, the folder containing the image files must have write
+	permissions.
+
+.. note:: Image processing can require a considerable amount of server
+	memory for some operations. If you are experiencing out of memory errors
+	while processing images you may need to limit their maximum size, and/or
+	adjust PHP memory limits.
+
+Processing Functions
+====================
+
+There are four available processing functions:
+
+-  $this->image_lib->resize()
+-  $this->image_lib->crop()
+-  $this->image_lib->rotate()
+-  $this->image_lib->watermark()
+-  $this->image_lib->clear()
+
+These functions return boolean TRUE upon success and FALSE for failure.
+If they fail you can retrieve the error message using this function::
+
+	echo $this->image_lib->display_errors();
+
+A good practice is use the processing function conditionally, showing an
+error upon failure, like this::
+
+	if ( ! $this->image_lib->resize())
+	{
+	    echo $this->image_lib->display_errors();
+	}
+
+Note: You can optionally specify the HTML formatting to be applied to
+the errors, by submitting the opening/closing tags in the function, like
+this::
+
+	$this->image_lib->display_errors('<p>', '</p>');
+
+Preferences
+===========
+
+The preferences described below allow you to tailor the image processing
+to suit your needs.
+
+Note that not all preferences are available for every function. For
+example, the x/y axis preferences are only available for image cropping.
+Likewise, the width and height preferences have no effect on cropping.
+The "availability" column indicates which functions support a given
+preference.
+
+Availability Legend:
+
+-  R - Image Resizing
+-  C - Image Cropping
+-  X - Image Rotation
+-  W - Image Watermarking
+
+======================= ======================= =============================== =========================================================================== =============
+Preference              Default Value           Options                         Description                                                                 Availability
+======================= ======================= =============================== =========================================================================== =============
+**image_library**       GD2                     GD, GD2, ImageMagick, NetPBM    Sets the image library to be used.                                          R, C, X, W
+**library_path**        None                    None                            Sets the server path to your ImageMagick or NetPBM library. If you use      R, C, X
+                                                                                either of those libraries you must supply the path.                         R, C, S, W
+**source_image**        None                    None                            Sets the source image name/path. The path must be a relative or absolute
+                                                                                server path, not a URL.
+**dynamic_output**      FALSE                   TRUE/FALSE (boolean)            Determines whether the new image file should be written to disk or          R, C, X, W
+                                                                                generated dynamically. Note: If you choose the dynamic setting, only one
+                                                                                image can be shown at a time, and it can't be positioned on the page. It
+                                                                                simply outputs the raw image dynamically to your browser, along with
+                                                                                image headers.
+**quality**             90%                     1 - 100%                        Sets the quality of the image. The higher the quality the larger the        R, C, X, W
+                                                                                file size.
+**new_image**           None                    None                            Sets the destination image name/path. You'll use this preference when       R, C, X, W
+                                                                                creating an image copy. The path must be a relative or absolute server
+                                                                                path, not a URL.
+**width**               None                    None                            Sets the width you would like the image set to.                             R, C
+**height**              None                    None                            Sets the height you would like the image set to.                            R, C
+**create_thumb**        FALSE                   TRUE/FALSE (boolean)            Tells the image processing function to create a thumb.                      R
+**thumb_marker**        _thumb                  None                            Specifies the thumbnail indicator. It will be inserted just before the      R
+                                                                                file extension, so mypic.jpg would become mypic_thumb.jpg
+**maintain_ratio**      TRUE                    TRUE/FALSE (boolean)            Specifies whether to maintain the original aspect ratio when resizing or    R, C
+                                                                                use hard values.
+**master_dim**          auto                    auto, width, height             Specifies what to use as the master axis when resizing or creating          R
+                                                                                thumbs. For example, let's say you want to resize an image to 100 X 75
+                                                                                pixels. If the source image size does not allow perfect resizing to
+                                                                                those dimensions, this setting determines which axis should be used as
+                                                                                the hard value. "auto" sets the axis automatically based on whether the
+                                                                                image is taller then wider, or vice versa.
+**rotation_angle**      None                    90, 180, 270, vrt, hor          Specifies the angle of rotation when rotating images. Note that PHP         X
+                                                                                rotates counter-clockwise, so a 90 degree rotation to the right must be
+                                                                                specified as 270.
+**x_axis**              None                    None                            Sets the X coordinate in pixels for image cropping. For example, a          C
+                                                                                setting of 30 will crop an image 30 pixels from the left.
+**y_axis**              None                    None                            Sets the Y coordinate in pixels for image cropping. For example, a          C
+                                                                                setting of 30 will crop an image 30 pixels from the top.
+======================= ======================= =============================== =========================================================================== =============
+
+Setting preferences in a config file
+====================================
+
+If you prefer not to set preferences using the above method, you can
+instead put them into a config file. Simply create a new file called
+image_lib.php, add the $config array in that file. Then save the file
+in: config/image_lib.php and it will be used automatically. You will
+NOT need to use the $this->image_lib->initialize function if you save
+your preferences in a config file.
+
+$this->image_lib->resize()
+===========================
+
+The image resizing function lets you resize the original image, create a
+copy (with or without resizing), or create a thumbnail image.
+
+For practical purposes there is no difference between creating a copy
+and creating a thumbnail except a thumb will have the thumbnail marker
+as part of the name (ie, mypic_thumb.jpg).
+
+All preferences listed in the table above are available for this
+function except these three: rotation_angle, x_axis, and y_axis.
+
+Creating a Thumbnail
+--------------------
+
+The resizing function will create a thumbnail file (and preserve the
+original) if you set this preference to TRUE::
+
+	$config['create_thumb'] = TRUE;
+
+This single preference determines whether a thumbnail is created or not.
+
+Creating a Copy
+---------------
+
+The resizing function will create a copy of the image file (and preserve
+the original) if you set a path and/or a new filename using this
+preference::
+
+	$config['new_image'] = '/path/to/new_image.jpg';
+
+Notes regarding this preference:
+
+-  If only the new image name is specified it will be placed in the same
+   folder as the original
+-  If only the path is specified, the new image will be placed in the
+   destination with the same name as the original.
+-  If both the path and image name are specified it will placed in its
+   own destination and given the new name.
+
+Resizing the Original Image
+---------------------------
+
+If neither of the two preferences listed above (create_thumb, and
+new_image) are used, the resizing function will instead target the
+original image for processing.
+
+$this->image_lib->crop()
+=========================
+
+The cropping function works nearly identically to the resizing function
+except it requires that you set preferences for the X and Y axis (in
+pixels) specifying where to crop, like this::
+
+	$config['x_axis'] = '100';
+	$config['y_axis'] = '40';
+
+All preferences listed in the table above are available for this
+function except these: rotation_angle, width, height, create_thumb,
+new_image.
+
+Here's an example showing how you might crop an image::
+
+	$config['image_library'] = 'imagemagick';
+	$config['library_path'] = '/usr/X11R6/bin/';
+	$config['source_image']	= '/path/to/image/mypic.jpg';
+	$config['x_axis'] = '100';
+	$config['y_axis'] = '60';
+
+	$this->image_lib->initialize($config); 
+
+	if ( ! $this->image_lib->crop())
+	{
+	    echo $this->image_lib->display_errors();
+	}
+
+Note: Without a visual interface it is difficult to crop images, so this
+function is not very useful unless you intend to build such an
+interface. That's exactly what we did using for the photo gallery module
+in ExpressionEngine, the CMS we develop. We added a JavaScript UI that
+lets the cropping area be selected.
+
+$this->image_lib->rotate()
+===========================
+
+The image rotation function requires that the angle of rotation be set
+via its preference::
+
+	$config['rotation_angle'] = '90';
+
+There are 5 rotation options:
+
+#. 90 - rotates counter-clockwise by 90 degrees.
+#. 180 - rotates counter-clockwise by 180 degrees.
+#. 270 - rotates counter-clockwise by 270 degrees.
+#. hor - flips the image horizontally.
+#. vrt - flips the image vertically.
+
+Here's an example showing how you might rotate an image::
+
+	$config['image_library'] = 'netpbm';
+	$config['library_path'] = '/usr/bin/';
+	$config['source_image']	= '/path/to/image/mypic.jpg';
+	$config['rotation_angle'] = 'hor';
+
+	$this->image_lib->initialize($config); 
+
+	if ( ! $this->image_lib->rotate())
+	{
+	    echo $this->image_lib->display_errors();
+	}
+
+$this->image_lib->clear()
+==========================
+
+The clear function resets all of the values used when processing an
+image. You will want to call this if you are processing images in a
+loop.
+
+::
+
+	$this->image_lib->clear();
+
+
+******************
+Image Watermarking
+******************
+
+The Watermarking feature requires the GD/GD2 library.
+
+Two Types of Watermarking
+=========================
+
+There are two types of watermarking that you can use:
+
+-  **Text**: The watermark message will be generating using text, either
+   with a True Type font that you specify, or using the native text
+   output that the GD library supports. If you use the True Type version
+   your GD installation must be compiled with True Type support (most
+   are, but not all).
+-  **Overlay**: The watermark message will be generated by overlaying an
+   image (usually a transparent PNG or GIF) containing your watermark
+   over the source image.
+
+Watermarking an Image
+=====================
+
+Just as with the other functions (resizing, cropping, and rotating) the
+general process for watermarking involves setting the preferences
+corresponding to the action you intend to perform, then calling the
+watermark function. Here is an example::
+
+	$config['source_image']	= '/path/to/image/mypic.jpg';
+	$config['wm_text'] = 'Copyright 2006 - John Doe';
+	$config['wm_type'] = 'text';
+	$config['wm_font_path'] = './system/fonts/texb.ttf';
+	$config['wm_font_size']	= '16';
+	$config['wm_font_color'] = 'ffffff';
+	$config['wm_vrt_alignment'] = 'bottom';
+	$config['wm_hor_alignment'] = 'center';
+	$config['wm_padding'] = '20';
+
+	$this->image_lib->initialize($config); 
+
+	$this->image_lib->watermark();
+
+The above example will use a 16 pixel True Type font to create the text
+"Copyright 2006 - John Doe". The watermark will be positioned at the
+bottom/center of the image, 20 pixels from the bottom of the image.
+
+.. note:: In order for the image class to be allowed to do any
+	processing, the image file must have "write" file permissions. For
+	example, 777.
+
+Watermarking Preferences
+========================
+
+This table shown the preferences that are available for both types of
+watermarking (text or overlay)
+
+======================= =================== ======================= ==========================================================================
+Preference              Default Value       Options                 Description
+======================= =================== ======================= ==========================================================================
+**wm_type**             text                text, overlay           Sets the type of watermarking that should be used.
+**source_image**        None                None                    Sets the source image name/path. The path must be a relative or absolute
+                                                                    server path, not a URL.
+**dynamic_output**      FALSE               TRUE/FALSE (boolean)    Determines whether the new image file should be written to disk or
+                                                                    generated dynamically. Note: If you choose the dynamic setting, only one
+                                                                    image can be shown at a time, and it can't be positioned on the page. It
+                                                                    simply outputs the raw image dynamically to your browser, along with
+                                                                    image headers.
+**quality**             90%                 1 - 100%                Sets the quality of the image. The higher the quality the larger the
+                                                                    file size.
+**padding**             None                A number                The amount of padding, set in pixels, that will be applied to the
+                                                                    watermark to set it away from the edge of your images.
+**wm_vrt_alignment**    bottom              top, middle, bottom     Sets the vertical alignment for the watermark image.
+**wm_hor_alignment**    center              left, center, right     Sets the horizontal alignment for the watermark image.
+**wm_hor_offset**       None                None                    You may specify a horizontal offset (in pixels) to apply to the
+                                                                    watermark position. The offset normally moves the watermark to the
+                                                                    right, except if you have your alignment set to "right" then your offset
+                                                                    value will move the watermark toward the left of the image.
+**wm_vrt_offset**       None                None                    You may specify a vertical offset (in pixels) to apply to the watermark
+                                                                    position. The offset normally moves the watermark down, except if you
+                                                                    have your alignment set to "bottom" then your offset value will move the
+                                                                    watermark toward the top of the image.
+======================= =================== ======================= ==========================================================================
+
+Text Preferences
+----------------
+
+This table shown the preferences that are available for the text type of
+watermarking.
+
+======================= =================== =================== ==========================================================================
+Preference              Default Value       Options             Description
+======================= =================== =================== ==========================================================================
+**wm_text**             None                None                The text you would like shown as the watermark. Typically this will be a
+                                                                copyright notice.
+**wm_font_path**        None                None                The server path to the True Type Font you would like to use. If you do
+                                                                not use this option, the native GD font will be used.
+**wm_font_size**        16                  None                The size of the text. Note: If you are not using the True Type option
+                                                                above, the number is set using a range of 1 - 5. Otherwise, you can use
+                                                                any valid pixel size for the font you're using.
+**wm_font_color**       ffffff              None                The font color, specified in hex. Note, you must use the full 6
+                                                                character hex value (ie, 993300), rather than the three character
+                                                                abbreviated version (ie fff).
+**wm_shadow_color**     None                None                The color of the drop shadow, specified in hex. If you leave this blank
+                                                                a drop shadow will not be used. Note, you must use the full 6 character
+                                                                hex value (ie, 993300), rather than the three character abbreviated
+                                                                version (ie fff).
+**wm_shadow_distance**  3                   None                The distance (in pixels) from the font that the drop shadow should
+                                                                appear.
+======================= =================== =================== ==========================================================================
+
+Overlay Preferences
+-------------------
+
+This table shown the preferences that are available for the overlay type
+of watermarking.
+
+======================= =================== =================== ==========================================================================
+Preference              Default Value       Options             Description
+======================= =================== =================== ==========================================================================
+**wm_overlay_path**     None                None                The server path to the image you wish to use as your watermark. Required
+                                                                only if you are using the overlay method.
+**wm_opacity**          50                  1 - 100             Image opacity. You may specify the opacity (i.e. transparency) of your
+                                                                watermark image. This allows the watermark to be faint and not
+                                                                completely obscure the details from the original image behind it. A 50%
+                                                                opacity is typical.
+**wm_x_transp**         4                   A number            If your watermark image is a PNG or GIF image, you may specify a color
+                                                                on the image to be "transparent". This setting (along with the next)
+                                                                will allow you to specify that color. This works by specifying the "X"
+                                                                and "Y" coordinate pixel (measured from the upper left) within the image
+                                                                that corresponds to a pixel representative of the color you want to be
+                                                                transparent.
+**wm_y_transp**         4                   A number            Along with the previous setting, this allows you to specify the
+                                                                coordinate to a pixel representative of the color you want to be
+                                                                transparent.
+======================= =================== =================== ==========================================================================
diff --git a/user_guide_src/source/libraries/index.rst b/user_guide_src/source/libraries/index.rst
new file mode 100644
index 000000000..678b633dd
--- /dev/null
+++ b/user_guide_src/source/libraries/index.rst
@@ -0,0 +1,9 @@
+#########
+Libraries
+#########
+
+.. toctree::
+	:glob:
+	:titlesonly:
+	
+	*
\ No newline at end of file
diff --git a/user_guide_src/source/libraries/input.rst b/user_guide_src/source/libraries/input.rst
new file mode 100644
index 000000000..bcf117358
--- /dev/null
+++ b/user_guide_src/source/libraries/input.rst
@@ -0,0 +1,300 @@
+###########
+Input Class
+###########
+
+The Input Class serves two purposes:
+
+#. It pre-processes global input data for security.
+#. It provides some helper functions for fetching input data and
+   pre-processing it.
+
+.. note:: This class is initialized automatically by the system so there
+	is no need to do it manually.
+
+Security Filtering
+==================
+
+The security filtering function is called automatically when a new
+:doc:`controller <../general/controllers>` is invoked. It does the
+following:
+
+-  If $config['allow_get_array'] is FALSE(default is TRUE), destroys
+   the global GET array.
+-  Destroys all global variables in the event register_globals is
+   turned on.
+-  Filters the GET/POST/COOKIE array keys, permitting only alpha-numeric
+   (and a few other) characters.
+-  Provides XSS (Cross-site Scripting Hacks) filtering. This can be
+   enabled globally, or upon request.
+-  Standardizes newline characters to \\n(In Windows \\r\\n)
+
+XSS Filtering
+=============
+
+The Input class has the ability to filter input automatically to prevent
+cross-site scripting attacks. If you want the filter to run
+automatically every time it encounters POST or COOKIE data you can
+enable it by opening your application/config/config.php file and setting
+this::
+
+	$config['global_xss_filtering'] = TRUE;
+
+Please refer to the :doc:`Security class <security>` documentation for
+information on using XSS Filtering in your application.
+
+Using POST, COOKIE, or SERVER Data
+==================================
+
+CodeIgniter comes with three helper functions that let you fetch POST,
+COOKIE or SERVER items. The main advantage of using the provided
+functions rather than fetching an item directly ($_POST['something'])
+is that the functions will check to see if the item is set and return
+false (boolean) if not. This lets you conveniently use data without
+having to test whether an item exists first. In other words, normally
+you might do something like this::
+
+	if ( ! isset($_POST['something']))
+	{
+	    $something = FALSE;
+	}
+	else
+	{
+	    $something = $_POST['something'];
+	}
+
+With CodeIgniter's built in functions you can simply do this::
+
+	$something = $this->input->post('something');
+
+The three functions are:
+
+-  $this->input->post()
+-  $this->input->cookie()
+-  $this->input->server()
+
+$this->input->post()
+====================
+
+The first parameter will contain the name of the POST item you are
+looking for::
+
+	$this->input->post('some_data');
+
+The function returns FALSE (boolean) if the item you are attempting to
+retrieve does not exist.
+
+The second optional parameter lets you run the data through the XSS
+filter. It's enabled by setting the second parameter to boolean TRUE;
+
+::
+
+	$this->input->post('some_data', TRUE);
+
+To return an array of all POST items call without any parameters.
+
+To return all POST items and pass them through the XSS filter set the
+first parameter NULL while setting the second parameter to boolean;
+
+The function returns FALSE (boolean) if there are no items in the POST.
+
+::
+
+	$this->input->post(NULL, TRUE); // returns all POST items with XSS filter 
+	$this->input->post(); // returns all POST items without XSS filter
+
+$this->input->get()
+===================
+
+This function is identical to the post function, only it fetches get
+data::
+
+	$this->input->get('some_data', TRUE);
+
+To return an array of all GET items call without any parameters.
+
+To return all GET items and pass them through the XSS filter set the
+first parameter NULL while setting the second parameter to boolean;
+
+The function returns FALSE (boolean) if there are no items in the GET.
+
+::
+
+	$this->input->get(NULL, TRUE); // returns all GET items with XSS filter 
+	$this->input->get(); // returns all GET items without XSS filtering
+	
+
+$this->input->get_post()
+=========================
+
+This function will search through both the post and get streams for
+data, looking first in post, and then in get::
+
+	$this->input->get_post('some_data', TRUE);
+
+$this->input->cookie()
+======================
+
+This function is identical to the post function, only it fetches cookie
+data::
+
+	$this->input->cookie('some_data', TRUE);
+
+$this->input->server()
+======================
+
+This function is identical to the above functions, only it fetches
+server data::
+
+	$this->input->server('some_data');
+
+$this->input->set_cookie()
+===========================
+
+Sets a cookie containing the values you specify. There are two ways to
+pass information to this function so that a cookie can be set: Array
+Method, and Discrete Parameters:
+
+Array Method
+^^^^^^^^^^^^
+
+Using this method, an associative array is passed to the first
+parameter::
+
+	$cookie = array(
+	    'name'   => 'The Cookie Name',
+	    'value'  => 'The Value',
+	    'expire' => '86500',
+	    'domain' => '.some-domain.com',
+	    'path'   => '/',
+	    'prefix' => 'myprefix_',
+	    'secure' => TRUE
+	);
+
+	$this->input->set_cookie($cookie);
+
+**Notes:**
+
+Only the name and value are required. To delete a cookie set it with the
+expiration blank.
+
+The expiration is set in **seconds**, which will be added to the current
+time. Do not include the time, but rather only the number of seconds
+from *now* that you wish the cookie to be valid. If the expiration is
+set to zero the cookie will only last as long as the browser is open.
+
+For site-wide cookies regardless of how your site is requested, add your
+URL to the **domain** starting with a period, like this:
+.your-domain.com
+
+The path is usually not needed since the function sets a root path.
+
+The prefix is only needed if you need to avoid name collisions with
+other identically named cookies for your server.
+
+The secure boolean is only needed if you want to make it a secure cookie
+by setting it to TRUE.
+
+Discrete Parameters
+^^^^^^^^^^^^^^^^^^^
+
+If you prefer, you can set the cookie by passing data using individual
+parameters::
+
+	$this->input->set_cookie($name, $value, $expire, $domain, $path, $prefix, $secure);
+
+$this->input->cookie()
+======================
+
+Lets you fetch a cookie. The first parameter will contain the name of
+the cookie you are looking for (including any prefixes)::
+
+	cookie('some_cookie');
+
+The function returns FALSE (boolean) if the item you are attempting to
+retrieve does not exist.
+
+The second optional parameter lets you run the data through the XSS
+filter. It's enabled by setting the second parameter to boolean TRUE;
+
+::
+
+	cookie('some_cookie', TRUE);
+
+
+$this->input->ip_address()
+===========================
+
+Returns the IP address for the current user. If the IP address is not
+valid, the function will return an IP of: 0.0.0.0
+
+::
+
+	echo $this->input->ip_address();
+
+$this->input->valid_ip($ip)
+============================
+
+Takes an IP address as input and returns TRUE or FALSE (boolean) if it
+is valid or not. Note: The $this->input->ip_address() function above
+validates the IP automatically.
+
+::
+
+	if ( ! $this->input->valid_ip($ip))
+	{
+	     echo 'Not Valid';
+	}
+	else
+	{
+	     echo 'Valid';
+	}
+
+$this->input->user_agent()
+===========================
+
+Returns the user agent (web browser) being used by the current user.
+Returns FALSE if it's not available.
+
+::
+
+	echo $this->input->user_agent();
+
+See the :doc:`User Agent Class <user_agent>` for methods which extract
+information from the user agent string.
+
+$this->input->request_headers()
+================================
+
+Useful if running in a non-Apache environment where
+`apache_request_headers() <http://php.net/apache_request_headers>`_
+will not be supported. Returns an array of headers.
+
+::
+
+	$headers = $this->input->request_headers();
+
+$this->input->get_request_header();
+=====================================
+
+Returns a single member of the request headers array.
+
+::
+
+	$this->input->get_request_header('some-header', TRUE);
+
+$this->input->is_ajax_request()
+=================================
+
+Checks to see if the HTTP_X_REQUESTED_WITH server header has been
+set, and returns a boolean response.
+
+$this->input->is_cli_request()
+================================
+
+Checks to see if the STDIN constant is set, which is a failsafe way to
+see if PHP is being run on the command line.
+
+::
+
+	$this->input->is_cli_request()
+
diff --git a/user_guide_src/source/libraries/javascript.rst b/user_guide_src/source/libraries/javascript.rst
new file mode 100644
index 000000000..5e80fb998
--- /dev/null
+++ b/user_guide_src/source/libraries/javascript.rst
@@ -0,0 +1,301 @@
+.. note:: This driver is experimental. Its feature set and
+	implementation may change in future releases.
+
+################
+Javascript Class
+################
+
+CodeIgniter provides a library to help you with certain common functions
+that you may want to use with Javascript. Please note that CodeIgniter
+does not require the jQuery library to run, and that any scripting
+library will work equally well. The jQuery library is simply presented
+as a convenience if you choose to use it.
+
+Initializing the Class
+======================
+
+To initialize the Javascript class manually in your controller
+constructor, use the $this->load->library function. Currently, the only
+available library is jQuery, which will automatically be loaded like
+this::
+
+	$this->load->library('javascript');
+
+The Javascript class also accepts parameters, js_library_driver
+(string) default 'jquery' and autoload (bool) default TRUE. You may
+override the defaults if you wish by sending an associative array::
+
+	$this->load->library('javascript', array('js_library_driver' => 'scripto', 'autoload' => FALSE));
+
+Again, presently only 'jquery' is available. You may wish to set
+autoload to FALSE, though, if you do not want the jQuery library to
+automatically include a script tag for the main jQuery script file. This
+is useful if you are loading it from a location outside of CodeIgniter,
+or already have the script tag in your markup.
+
+Once loaded, the jQuery library object will be available using:
+$this->javascript
+
+Setup and Configuration
+=======================
+
+Set these variables in your view
+--------------------------------
+
+As a Javascript library, your files must be available to your
+application.
+
+As Javascript is a client side language, the library must be able to
+write content into your final output. This generally means a view.
+You'll need to include the following variables in the <head> sections of
+your output.
+
+::
+
+	<?php echo $library_src;?>
+	<?php echo $script_head;?>
+
+
+$library_src, is where the actual library file will be loaded, as well
+as any subsequent plugin script calls; $script_head is where specific
+events, functions and other commands will be rendered.
+
+Set the path to the librarys with config items
+----------------------------------------------
+
+There are some configuration items in Javascript library. These can
+either be set in application/config.php, within its own
+config/javascript.php file, or within any controller usings the
+set_item() function.
+
+An image to be used as an "ajax loader", or progress indicator. Without
+one, the simple text message of "loading" will appear when Ajax calls
+need to be made.
+
+::
+
+	$config['javascript_location'] = 'http://localhost/codeigniter/themes/js/jquery/';
+	$config['javascript_ajax_img'] = 'images/ajax-loader.gif';
+
+If you keep your files in the same directories they were downloaded
+from, then you need not set this configuration items.
+
+The jQuery Class
+================
+
+To initialize the jQuery class manually in your controller constructor,
+use the $this->load->library function::
+
+	$this->load->library('jquery');
+
+You may send an optional parameter to determine whether or not a script
+tag for the main jQuery file will be automatically included when loading
+the library. It will be created by default. To prevent this, load the
+library as follows::
+
+	$this->load->library('jquery', FALSE);
+
+Once loaded, the jQuery library object will be available using:
+$this->jquery
+
+jQuery Events
+=============
+
+Events are set using the following syntax.
+
+::
+
+	$this->jquery->event('element_path', code_to_run());
+
+
+In the above example:
+
+-  "event" is any of blur, change, click, dblclick, error, focus, hover,
+   keydown, keyup, load, mousedown, mouseup, mouseover, mouseup, resize,
+   scroll, or unload.
+-  "element_path" is any valid `jQuery
+   selector <http://docs.jquery.com/Selectors>`_. Due to jQuery's unique
+   selector syntax, this is usually an element id, or CSS selector. For
+   example "#notice_area" would effect <div id="notice_area">, and
+   "#content a.notice" would effect all anchors with a class of "notice"
+   in the div with id "content".
+-  "code_to_run()" is script your write yourself, or an action such as
+   an effect from the jQuery library below.
+
+Effects
+=======
+
+The query library supports a powerful
+`Effects <http://docs.jquery.com/Effects>`_ repertoire. Before an effect
+can be used, it must be loaded::
+
+	$this->jquery->effect([optional path] plugin name); // for example $this->jquery->effect('bounce');
+
+
+hide() / show()
+---------------
+
+Each of this functions will affect the visibility of an item on your
+page. hide() will set an item invisible, show() will reveal it.
+
+::
+
+	$this->jquery->hide(target, optional speed, optional extra information);
+	$this->jquery->show(target, optional speed, optional extra information);
+
+
+-  "target" will be any valid jQuery selector or selectors.
+-  "speed" is optional, and is set to either slow, normal, fast, or
+   alternatively a number of milliseconds.
+-  "extra information" is optional, and could include a callback, or
+   other additional information.
+
+toggle()
+--------
+
+toggle() will change the visibility of an item to the opposite of its
+current state, hiding visible elements, and revealing hidden ones.
+
+::
+
+	$this->jquery->toggle(target);
+
+
+-  "target" will be any valid jQuery selector or selectors.
+
+animate()
+---------
+
+::
+
+	 $this->jquery->animate(target, parameters, optional speed, optional extra information);
+
+
+-  "target" will be any valid jQuery selector or selectors.
+-  "parameters" in jQuery would generally include a series of CSS
+   properties that you wish to change.
+-  "speed" is optional, and is set to either slow, normal, fast, or
+   alternatively a number of milliseconds.
+-  "extra information" is optional, and could include a callback, or
+   other additional information.
+
+For a full summary, see
+`http://docs.jquery.com/Effects/animate <http://docs.jquery.com/Effects/animate>`_
+
+Here is an example of an animate() called on a div with an id of "note",
+and triggered by a click using the jQuery library's click() event.
+
+::
+
+	$params = array(
+	'height' => 80,
+	'width' => '50%',
+	'marginLeft' => 125
+	);
+	$this->jquery->click('#trigger', $this->jquery->animate('#note', $params, normal));
+
+fadeIn() / fadeOut()
+--------------------
+
+::
+
+	$this->jquery->fadeIn(target,  optional speed, optional extra information);
+	$this->jquery->fadeOut(target,  optional speed, optional extra information);
+
+
+-  "target" will be any valid jQuery selector or selectors.
+-  "speed" is optional, and is set to either slow, normal, fast, or
+   alternatively a number of milliseconds.
+-  "extra information" is optional, and could include a callback, or
+   other additional information.
+
+toggleClass()
+-------------
+
+This function will add or remove a CSS class to its target.
+
+::
+
+	$this->jquery->toggleClass(target, class)
+
+
+-  "target" will be any valid jQuery selector or selectors.
+-  "class" is any CSS classname. Note that this class must be defined
+   and available in a CSS that is already loaded.
+
+fadeIn() / fadeOut()
+--------------------
+
+These effects cause an element(s) to disappear or reappear over time.
+
+::
+
+	$this->jquery->fadeIn(target,  optional speed, optional extra information);
+	$this->jquery->fadeOut(target,  optional speed, optional extra information);
+
+
+-  "target" will be any valid jQuery selector or selectors.
+-  "speed" is optional, and is set to either slow, normal, fast, or
+   alternatively a number of milliseconds.
+-  "extra information" is optional, and could include a callback, or
+   other additional information.
+
+slideUp() / slideDown() / slideToggle()
+---------------------------------------
+
+These effects cause an element(s) to slide.
+
+::
+
+	$this->jquery->slideUp(target,  optional speed, optional extra information);
+	$this->jquery->slideDown(target,  optional speed, optional extra information);
+	$this->jquery->slideToggle(target,  optional speed, optional extra information);
+
+
+-  "target" will be any valid jQuery selector or selectors.
+-  "speed" is optional, and is set to either slow, normal, fast, or
+   alternatively a number of milliseconds.
+-  "extra information" is optional, and could include a callback, or
+   other additional information.
+
+Plugins
+=======
+
+Some select jQuery plugins are made available using this library.
+
+corner()
+--------
+
+Used to add distinct corners to page elements. For full details see
+`http://www.malsup.com/jquery/corner/ <http://www.malsup.com/jquery/corner/>`_
+
+::
+
+	$this->jquery->corner(target, corner_style);
+
+
+-  "target" will be any valid jQuery selector or selectors.
+-  "corner_style" is optional, and can be set to any valid style such
+   as round, sharp, bevel, bite, dog, etc. Individual corners can be set
+   by following the style with a space and using "tl" (top left), "tr"
+   (top right), "bl" (bottom left), or "br" (bottom right).
+
+::
+
+	$this->jquery->corner("#note", "cool tl br");
+
+
+tablesorter()
+-------------
+
+description to come
+
+modal()
+-------
+
+description to come
+
+calendar()
+----------
+
+description to come
diff --git a/user_guide_src/source/libraries/language.rst b/user_guide_src/source/libraries/language.rst
new file mode 100644
index 000000000..ec678cd21
--- /dev/null
+++ b/user_guide_src/source/libraries/language.rst
@@ -0,0 +1,90 @@
+##############
+Language Class
+##############
+
+The Language Class provides functions to retrieve language files and
+lines of text for purposes of internationalization.
+
+In your CodeIgniter system folder you'll find one called language
+containing sets of language files. You can create your own language
+files as needed in order to display error and other messages in other
+languages.
+
+Language files are typically stored in your system/language directory.
+Alternately you can create a folder called language inside your
+application folder and store them there. CodeIgniter will look first in
+your application/language directory. If the directory does not exist or
+the specified language is not located there CI will instead look in your
+global system/language folder.
+
+.. note:: Each language should be stored in its own folder. For example,
+	the English files are located at: system/language/english
+
+Creating Language Files
+=======================
+
+Language files must be named with _lang.php as the file extension. For
+example, let's say you want to create a file containing error messages.
+You might name it: error_lang.php
+
+Within the file you will assign each line of text to an array called
+$lang with this prototype::
+
+	$lang['language_key'] = "The actual message to be shown";
+
+.. note:: It's a good practice to use a common prefix for all messages
+	in a given file to avoid collisions with similarly named items in other
+	files. For example, if you are creating error messages you might prefix
+	them with error\_
+
+::
+
+	$lang['error_email_missing'] = "You must submit an email address";
+	$lang['error_url_missing'] = "You must submit a URL";
+	$lang['error_username_missing'] = "You must submit a username";
+
+Loading A Language File
+=======================
+
+In order to fetch a line from a particular file you must load the file
+first. Loading a language file is done with the following code::
+
+	$this->lang->load('filename', 'language');
+
+Where filename is the name of the file you wish to load (without the
+file extension), and language is the language set containing it (ie,
+english). If the second parameter is missing, the default language set
+in your application/config/config.php file will be used.
+
+Fetching a Line of Text
+=======================
+
+Once your desired language file is loaded you can access any line of
+text using this function::
+
+	$this->lang->line('language_key');
+
+Where language_key is the array key corresponding to the line you wish
+to show.
+
+Note: This function simply returns the line. It does not echo it for
+you.
+
+Using language lines as form labels
+-----------------------------------
+
+This feature has been deprecated from the language library and moved to
+the lang() function of the :doc:`Language
+helper <../helpers/language_helper>`.
+
+Auto-loading Languages
+======================
+
+If you find that you need a particular language globally throughout your
+application, you can tell CodeIgniter to
+:doc:`auto-load <../general/autoloader>` it during system
+initialization. This is done by opening the
+application/config/autoload.php file and adding the language(s) to the
+autoload array.
+
+
diff --git a/user_guide_src/source/libraries/loader.rst b/user_guide_src/source/libraries/loader.rst
new file mode 100644
index 000000000..bbe2ed530
--- /dev/null
+++ b/user_guide_src/source/libraries/loader.rst
@@ -0,0 +1,278 @@
+############
+Loader Class
+############
+
+Loader, as the name suggests, is used to load elements. These elements
+can be libraries (classes) :doc:`View files <../general/views>`,
+:doc:`Helpers <../general/helpers>`,
+:doc:`Models <../general/models>`, or your own files.
+
+.. note:: This class is initialized automatically by the system so there
+	is no need to do it manually.
+
+The following functions are available in this class:
+
+$this->load->library('class_name', $config, 'object name')
+===========================================================
+
+This function is used to load core classes. Where class_name is the
+name of the class you want to load. Note: We use the terms "class" and
+"library" interchangeably.
+
+For example, if you would like to send email with CodeIgniter, the first
+step is to load the email class within your controller::
+
+	$this->load->library('email');
+
+Once loaded, the library will be ready for use, using
+$this->email->*some_function*().
+
+Library files can be stored in subdirectories within the main
+"libraries" folder, or within your personal application/libraries
+folder. To load a file located in a subdirectory, simply include the
+path, relative to the "libraries" folder. For example, if you have file
+located at::
+
+	libraries/flavors/chocolate.php
+
+You will load it using::
+
+	$this->load->library('flavors/chocolate');
+
+You may nest the file in as many subdirectories as you want.
+
+Additionally, multiple libraries can be loaded at the same time by
+passing an array of libraries to the load function.
+
+::
+
+	$this->load->library(array('email', 'table'));
+
+Setting options
+---------------
+
+The second (optional) parameter allows you to optionally pass
+configuration setting. You will typically pass these as an array::
+
+	$config = array (
+	                  'mailtype' => 'html',
+	                  'charset'  => 'utf-8,
+	                  'priority' => '1'
+	               );
+
+	$this->load->library('email', $config);
+
+Config options can usually also be set via a config file. Each library
+is explained in detail in its own page, so please read the information
+regarding each one you would like to use.
+
+Please take note, when multiple libraries are supplied in an array for
+the first parameter, each will receive the same parameter information.
+
+Assigning a Library to a different object name
+----------------------------------------------
+
+If the third (optional) parameter is blank, the library will usually be
+assigned to an object with the same name as the library. For example, if
+the library is named Session, it will be assigned to a variable named
+$this->session.
+
+If you prefer to set your own class names you can pass its value to the
+third parameter::
+
+	$this->load->library('session', '', 'my_session');
+
+	// Session class is now accessed using:
+
+	$this->my_session
+
+Please take note, when multiple libraries are supplied in an array for
+the first parameter, this parameter is discarded.
+
+$this->load->view('file_name', $data, true/false)
+==================================================
+
+This function is used to load your View files. If you haven't read the
+:doc:`Views <../general/views>` section of the user guide it is
+recommended that you do since it shows you how this function is
+typically used.
+
+The first parameter is required. It is the name of the view file you
+would like to load. Note: The .php file extension does not need to be
+specified unless you use something other than .php.
+
+The second **optional** parameter can take an associative array or an
+object as input, which it runs through the PHP
+`extract <http://www.php.net/extract>`_ function to convert to variables
+that can be used in your view files. Again, read the
+:doc:`Views <../general/views>` page to learn how this might be useful.
+
+The third **optional** parameter lets you change the behavior of the
+function so that it returns data as a string rather than sending it to
+your browser. This can be useful if you want to process the data in some
+way. If you set the parameter to true (boolean) it will return data. The
+default behavior is false, which sends it to your browser. Remember to
+assign it to a variable if you want the data returned::
+
+	$string = $this->load->view('myfile', '', true);
+
+$this->load->model('Model_name');
+==================================
+
+::
+
+	$this->load->model('Model_name');
+
+
+If your model is located in a sub-folder, include the relative path from
+your models folder. For example, if you have a model located at
+application/models/blog/queries.php you'll load it using::
+
+	$this->load->model('blog/queries');
+
+
+If you would like your model assigned to a different object name you can
+specify it via the second parameter of the loading function::
+
+	$this->load->model('Model_name', 'fubar');
+
+	$this->fubar->function();
+
+$this->load->database('options', true/false)
+============================================
+
+This function lets you load the database class. The two parameters are
+**optional**. Please see the :doc:`database <../database/index>`
+section for more info.
+
+$this->load->vars($array)
+=========================
+
+This function takes an associative array as input and generates
+variables using the PHP `extract <http://www.php.net/extract>`_
+function. This function produces the same result as using the second
+parameter of the $this->load->view() function above. The reason you
+might want to use this function independently is if you would like to
+set some global variables in the constructor of your controller and have
+them become available in any view file loaded from any function. You can
+have multiple calls to this function. The data get cached and merged
+into one array for conversion to variables.
+
+$this->load->get_var($key)
+===========================
+
+This function checks the associative array of variables available to
+your views. This is useful if for any reason a var is set in a library
+or another controller method using $this->load->vars().
+
+$this->load->helper('file_name')
+=================================
+
+This function loads helper files, where file_name is the name of the
+file, without the _helper.php extension.
+
+$this->load->file('filepath/filename', true/false)
+==================================================
+
+This is a generic file loading function. Supply the filepath and name in
+the first parameter and it will open and read the file. By default the
+data is sent to your browser, just like a View file, but if you set the
+second parameter to true (boolean) it will instead return the data as a
+string.
+
+$this->load->language('file_name')
+===================================
+
+This function is an alias of the :doc:`language loading
+function <language>`: $this->lang->load()
+
+$this->load->config('file_name')
+=================================
+
+This function is an alias of the :doc:`config file loading
+function <config>`: $this->config->load()
+
+Application "Packages"
+======================
+
+An application package allows for the easy distribution of complete sets
+of resources in a single directory, complete with its own libraries,
+models, helpers, config, and language files. It is recommended that
+these packages be placed in the application/third_party folder. Below
+is a sample map of an package directory
+
+Sample Package "Foo Bar" Directory Map
+======================================
+
+The following is an example of a directory for an application package
+named "Foo Bar".
+
+::
+
+	/application/third_party/foo_bar
+
+	config/
+	helpers/
+	language/
+	libraries/
+	models/
+
+Whatever the purpose of the "Foo Bar" application package, it has its
+own config files, helpers, language files, libraries, and models. To use
+these resources in your controllers, you first need to tell the Loader
+that you are going to be loading resources from a package, by adding the
+package path.
+
+$this->load->add_package_path()
+---------------------------------
+
+Adding a package path instructs the Loader class to prepend a given path
+for subsequent requests for resources. As an example, the "Foo Bar"
+application package above has a library named Foo_bar.php. In our
+controller, we'd do the following::
+
+	$this->load->add_package_path(APPPATH.'third_party/foo_bar/');
+	$this->load->library('foo_bar');
+
+$this->load->remove_package_path()
+------------------------------------
+
+When your controller is finished using resources from an application
+package, and particularly if you have other application packages you
+want to work with, you may wish to remove the package path so the Loader
+no longer looks in that folder for resources. To remove the last path
+added, simply call the method with no parameters.
+
+$this->load->remove_package_path()
+------------------------------------
+
+Or to remove a specific package path, specify the same path previously
+given to add_package_path() for a package.::
+
+	$this->load->remove_package_path(APPPATH.'third_party/foo_bar/');
+
+Package view files
+------------------
+
+By Default, package view files paths are set when add_package_path()
+is called. View paths are looped through, and once a match is
+encountered that view is loaded.
+
+In this instance, it is possible for view naming collisions within
+packages to occur, and possibly the incorrect package being loaded. To
+ensure against this, set an optional second parameter of FALSE when
+calling add_package_path().
+
+::
+
+	$this->load->add_package_path(APPPATH.'my_app', FALSE);
+	$this->load->view('my_app_index'); // Loads
+	$this->load->view('welcome_message'); // Will not load the default welcome_message b/c the second param to add_package_path is FALSE
+
+	// Reset things
+	$this->load->remove_package_path(APPPATH.'my_app');
+
+	// Again without the second parameter:
+	$this->load->add_package_path(APPPATH.'my_app', TRUE);
+	$this->load->view('my_app_index'); // Loads
+	$this->load->view('welcome_message'); // Loads
\ No newline at end of file
diff --git a/user_guide_src/source/libraries/output.rst b/user_guide_src/source/libraries/output.rst
new file mode 100644
index 000000000..2cf7c0854
--- /dev/null
+++ b/user_guide_src/source/libraries/output.rst
@@ -0,0 +1,138 @@
+############
+Output Class
+############
+
+The Output class is a small class with one main function: To send the
+finalized web page to the requesting browser. It is also responsible for
+:doc:`caching <../general/caching>` your web pages, if you use that
+feature.
+
+.. note:: This class is initialized automatically by the system so there
+	is no need to do it manually.
+
+Under normal circumstances you won't even notice the Output class since
+it works transparently without your intervention. For example, when you
+use the :doc:`Loader <../libraries/loader>` class to load a view file,
+it's automatically passed to the Output class, which will be called
+automatically by CodeIgniter at the end of system execution. It is
+possible, however, for you to manually intervene with the output if you
+need to, using either of the two following functions:
+
+$this->output->set_output();
+=============================
+
+Permits you to manually set the final output string. Usage example::
+
+	$this->output->set_output($data);
+
+.. important:: If you do set your output manually, it must be the last
+	thing done in the function you call it from. For example, if you build a
+	page in one of your controller functions, don't set the output until the
+	end.
+
+$this->output->set_content_type();
+====================================
+
+Permits you to set the mime-type of your page so you can serve JSON
+data, JPEG's, XML, etc easily.
+
+::
+
+	$this->output
+	    ->set_content_type('application/json')
+	    ->set_output(json_encode(array('foo' => 'bar')));
+
+	$this->output
+	    ->set_content_type('jpeg') // You could also use ".jpeg" which will have the full stop removed before looking in config/mimes.php
+	    ->set_output(file_get_contents('files/something.jpg'));
+
+.. important:: Make sure any non-mime string you pass to this method
+	exists in config/mimes.php or it will have no effect.
+
+$this->output->get_output();
+=============================
+
+Permits you to manually retrieve any output that has been sent for
+storage in the output class. Usage example::
+
+	$string = $this->output->get_output();
+
+Note that data will only be retrievable from this function if it has
+been previously sent to the output class by one of the CodeIgniter
+functions like $this->load->view().
+
+$this->output->append_output();
+================================
+
+Appends data onto the output string. Usage example::
+
+	$this->output->append_output($data);
+
+$this->output->set_header();
+=============================
+
+Permits you to manually set server headers, which the output class will
+send for you when outputting the final rendered display. Example::
+
+	$this->output->set_header("HTTP/1.0 200 OK");
+	$this->output->set_header("HTTP/1.1 200 OK");
+	$this->output->set_header('Last-Modified: '.gmdate('D, d M Y H:i:s', $last_update).' GMT');
+	$this->output->set_header("Cache-Control: no-store, no-cache, must-revalidate");
+	$this->output->set_header("Cache-Control: post-check=0, pre-check=0");
+	$this->output->set_header("Pragma: no-cache");
+
+$this->output->set_status_header(code, 'text');
+=================================================
+
+Permits you to manually set a server status header. Example::
+
+	$this->output->set_status_header('401');
+	// Sets the header as:  Unauthorized
+
+`See here <http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html>`_ for
+a full list of headers.
+
+$this->output->enable_profiler();
+==================================
+
+Permits you to enable/disable the
+:doc:`Profiler <../general/profiling>`, which will display benchmark
+and other data at the bottom of your pages for debugging and
+optimization purposes.
+
+To enable the profiler place the following function anywhere within your
+:doc:`Controller <../general/controllers>` functions::
+
+	$this->output->enable_profiler(TRUE);
+
+When enabled a report will be generated and inserted at the bottom of
+your pages.
+
+To disable the profiler you will use::
+
+	$this->output->enable_profiler(FALSE);
+
+$this->output->set_profiler_sections();
+=========================================
+
+Permits you to enable/disable specific sections of the Profiler when
+enabled. Please refer to the :doc:`Profiler <../general/profiling>`
+documentation for further information.
+
+$this->output->cache();
+=======================
+
+The CodeIgniter output library also controls caching. For more
+information, please see the :doc:`caching
+documentation <../general/caching>`.
+
+Parsing Execution Variables
+===========================
+
+CodeIgniter will parse the pseudo-variables {elapsed_time} and
+{memory_usage} in your output by default. To disable this, set the
+$parse_exec_vars class property to FALSE in your controller.
+::
+
+	$this->output->parse_exec_vars = FALSE;
+
diff --git a/user_guide_src/source/libraries/pagination.rst b/user_guide_src/source/libraries/pagination.rst
new file mode 100644
index 000000000..f1653c913
--- /dev/null
+++ b/user_guide_src/source/libraries/pagination.rst
@@ -0,0 +1,256 @@
+################
+Pagination Class
+################
+
+CodeIgniter's Pagination class is very easy to use, and it is 100%
+customizable, either dynamically or via stored preferences.
+
+If you are not familiar with the term "pagination", it refers to links
+that allows you to navigate from page to page, like this::
+
+	« First  < 1 2 3 4 5 >  Last »
+
+*******
+Example
+*******
+
+Here is a simple example showing how to create pagination in one of your
+:doc:`controller <../general/controllers>` functions::
+
+	$this->load->library('pagination');
+
+	$config['base_url'] = 'http://example.com/index.php/test/page/';
+	$config['total_rows'] = 200;
+	$config['per_page'] = 20; 
+
+	$this->pagination->initialize($config); 
+
+	echo $this->pagination->create_links();
+
+Notes
+=====
+
+The $config array contains your configuration variables. It is passed to
+the $this->pagination->initialize function as shown above. Although
+there are some twenty items you can configure, at minimum you need the
+three shown. Here is a description of what those items represent:
+
+-  **base_url** This is the full URL to the controller class/function
+   containing your pagination. In the example above, it is pointing to a
+   controller called "Test" and a function called "page". Keep in mind
+   that you can :doc:`re-route your URI <../general/routing>` if you
+   need a different structure.
+-  **total_rows** This number represents the total rows in the result
+   set you are creating pagination for. Typically this number will be
+   the total rows that your database query returned.
+-  **per_page** The number of items you intend to show per page. In the
+   above example, you would be showing 20 items per page.
+
+The create_links() function returns an empty string when there is no
+pagination to show.
+
+Setting preferences in a config file
+====================================
+
+If you prefer not to set preferences using the above method, you can
+instead put them into a config file. Simply create a new file called
+pagination.php, add the $config array in that file. Then save the file
+in: config/pagination.php and it will be used automatically. You will
+NOT need to use the $this->pagination->initialize function if you save
+your preferences in a config file.
+
+**************************
+Customizing the Pagination
+**************************
+
+The following is a list of all the preferences you can pass to the
+initialization function to tailor the display.
+
+$config['uri_segment'] = 3;
+============================
+
+The pagination function automatically determines which segment of your
+URI contains the page number. If you need something different you can
+specify it.
+
+$config['num_links'] = 2;
+==========================
+
+The number of "digit" links you would like before and after the selected
+page number. For example, the number 2 will place two digits on either
+side, as in the example links at the very top of this page.
+
+$config['use_page_number'] = TRUE;
+==================================
+
+By default, the URI segment will use the starting index for the items
+you are paginating. If you prefer to show the the actual page number,
+set this to TRUE.
+
+$config['page_query_string'] = TRUE;
+====================================
+
+By default, the pagination library assume you are using :doc:`URI
+Segments <../general/urls>`, and constructs your links something
+like
+
+::
+
+	http://example.com/index.php/test/page/20
+
+
+If you have $config['enable_query_strings'] set to TRUE your links
+will automatically be re-written using Query Strings. This option can
+also be explictly set. Using $config['page_query_string'] set to TRUE,
+the pagination link will become.
+
+::
+
+	http://example.com/index.php?c=test&m=page&per_page=20
+
+
+Note that "per_page" is the default query string passed, however can be
+configured using $config['query_string_segment'] = 'your_string'
+
+***********************
+Adding Enclosing Markup
+***********************
+
+If you would like to surround the entire pagination with some markup you
+can do it with these two prefs:
+
+$config['full_tag_open'] = '<p>';
+===================================
+
+The opening tag placed on the left side of the entire result.
+
+$config['full_tag_close'] = '</p>';
+=====================================
+
+The closing tag placed on the right side of the entire result.
+
+**************************
+Customizing the First Link
+**************************
+
+$config['first_link'] = 'First';
+=================================
+
+The text you would like shown in the "first" link on the left. If you do
+not want this link rendered, you can set its value to FALSE.
+
+$config['first_tag_open'] = '<div>';
+======================================
+
+The opening tag for the "first" link.
+
+$config['first_tag_close'] = '</div>';
+========================================
+
+The closing tag for the "first" link.
+
+*************************
+Customizing the Last Link
+*************************
+
+$config['last_link'] = 'Last';
+===============================
+
+The text you would like shown in the "last" link on the right. If you do
+not want this link rendered, you can set its value to FALSE.
+
+$config['last_tag_open'] = '<div>';
+=====================================
+
+The opening tag for the "last" link.
+
+$config['last_tag_close'] = '</div>';
+=======================================
+
+The closing tag for the "last" link.
+
+***************************
+Customizing the "Next" Link
+***************************
+
+$config['next_link'] = '&gt;';
+===============================
+
+The text you would like shown in the "next" page link. If you do not
+want this link rendered, you can set its value to FALSE.
+
+$config['next_tag_open'] = '<div>';
+=====================================
+
+The opening tag for the "next" link.
+
+$config['next_tag_close'] = '</div>';
+=======================================
+
+The closing tag for the "next" link.
+
+*******************************
+Customizing the "Previous" Link
+*******************************
+
+$config['prev_link'] = '&lt;';
+===============================
+
+The text you would like shown in the "previous" page link. If you do not
+want this link rendered, you can set its value to FALSE.
+
+$config['prev_tag_open'] = '<div>';
+=====================================
+
+The opening tag for the "previous" link.
+
+$config['prev_tag_close'] = '</div>';
+=======================================
+
+The closing tag for the "previous" link.
+
+***********************************
+Customizing the "Current Page" Link
+***********************************
+
+$config['cur_tag_open'] = '<b>';
+==================================
+
+The opening tag for the "current" link.
+
+$config['cur_tag_close'] = '</b>';
+====================================
+
+The closing tag for the "current" link.
+
+****************************
+Customizing the "Digit" Link
+****************************
+
+$config['num_tag_open'] = '<div>';
+====================================
+
+The opening tag for the "digit" link.
+
+$config['num_tag_close'] = '</div>';
+======================================
+
+The closing tag for the "digit" link.
+
+****************
+Hiding the Pages
+****************
+
+If you wanted to not list the specific pages (for example, you only want
+"next" and "previous" links), you can suppress their rendering by
+adding::
+
+	 $config['display_pages'] = FALSE;
+
+******************************
+Adding a class to every anchor
+******************************
+
+If you want to add a class attribute to every link rendered by the
+pagination class, you can set the config "anchor_class" equal to the
+classname you want.
diff --git a/user_guide_src/source/libraries/parser.rst b/user_guide_src/source/libraries/parser.rst
new file mode 100644
index 000000000..0b77ae4b9
--- /dev/null
+++ b/user_guide_src/source/libraries/parser.rst
@@ -0,0 +1,149 @@
+#####################
+Template Parser Class
+#####################
+
+The Template Parser Class enables you to parse pseudo-variables
+contained within your view files. It can parse simple variables or
+variable tag pairs. If you've never used a template engine,
+pseudo-variables look like this::
+
+	<html>
+	<head>
+	<title>{blog_title}</title>
+	</head>
+	<body>
+
+	<h3>{blog_heading}</h3>
+
+	{blog_entries}
+	<h5>{title}</h5>
+	<p>{body}</p>
+	{/blog_entries}
+	</body>
+	</html>
+
+These variables are not actual PHP variables, but rather plain text
+representations that allow you to eliminate PHP from your templates
+(view files).
+
+.. note:: CodeIgniter does **not** require you to use this class since
+	using pure PHP in your view pages lets them run a little faster.
+	However, some developers prefer to use a template engine if they work
+	with designers who they feel would find some confusion working with PHP.
+
+.. important:: The Template Parser Class is **not** a full-blown
+	template parsing solution. We've kept it very lean on purpose in order
+	to maintain maximum performance.
+
+Initializing the Class
+======================
+
+Like most other classes in CodeIgniter, the Parser class is initialized
+in your controller using the $this->load->library function::
+
+	$this->load->library('parser');
+
+Once loaded, the Parser library object will be available using:
+$this->parser
+
+The following functions are available in this library:
+
+$this->parser->parse()
+======================
+
+This method accepts a template name and data array as input, and it
+generates a parsed version. Example::
+
+	$this->load->library('parser');
+
+	$data = array(
+	            'blog_title' => 'My Blog Title',
+	            'blog_heading' => 'My Blog Heading'
+	            );
+
+	$this->parser->parse('blog_template', $data);
+
+The first parameter contains the name of the :doc:`view
+file <../general/views>` (in this example the file would be called
+blog_template.php), and the second parameter contains an associative
+array of data to be replaced in the template. In the above example, the
+template would contain two variables: {blog_title} and {blog_heading}
+
+There is no need to "echo" or do something with the data returned by
+$this->parser->parse(). It is automatically passed to the output class
+to be sent to the browser. However, if you do want the data returned
+instead of sent to the output class you can pass TRUE (boolean) to the
+third parameter::
+
+	$string = $this->parser->parse('blog_template', $data, TRUE);
+
+$this->parser->parse_string()
+==============================
+
+This method works exactly like parse(), only accepts a string as the
+first parameter in place of a view file.
+
+Variable Pairs
+==============
+
+The above example code allows simple variables to be replaced. What if
+you would like an entire block of variables to be repeated, with each
+iteration containing new values? Consider the template example we showed
+at the top of the page::
+
+	<html>
+	<head>
+	<title>{blog_title}</title>
+	</head>
+	<body>
+
+	<h3>{blog_heading}</h3>
+
+	{blog_entries}
+	<h5>{title}</h5>
+	<p>{body}</p>
+	{/blog_entries}
+	</body>
+	</html>
+
+In the above code you'll notice a pair of variables: {blog_entries}
+data... {/blog_entries}. In a case like this, the entire chunk of data
+between these pairs would be repeated multiple times, corresponding to
+the number of rows in a result.
+
+Parsing variable pairs is done using the identical code shown above to
+parse single variables, except, you will add a multi-dimensional array
+corresponding to your variable pair data. Consider this example::
+
+	$this->load->library('parser');
+
+	$data = array(
+	              'blog_title'   => 'My Blog Title',
+	              'blog_heading' => 'My Blog Heading',
+	              'blog_entries' => array(
+	                                      array('title' => 'Title 1', 'body' => 'Body 1'),
+	                                      array('title' => 'Title 2', 'body' => 'Body 2'),
+	                                      array('title' => 'Title 3', 'body' => 'Body 3'),
+	                                      array('title' => 'Title 4', 'body' => 'Body 4'),
+	                                      array('title' => 'Title 5', 'body' => 'Body 5')
+	                                      )
+	            );
+
+	$this->parser->parse('blog_template', $data);
+
+If your "pair" data is coming from a database result, which is already a
+multi-dimensional array, you can simply use the database result_array()
+function::
+
+	$query = $this->db->query("SELECT * FROM blog");
+
+	$this->load->library('parser');
+
+	$data = array(
+	              'blog_title'   => 'My Blog Title',
+	              'blog_heading' => 'My Blog Heading',
+	              'blog_entries' => $query->result_array()
+	            );
+
+	$this->parser->parse('blog_template', $data);
+
diff --git a/user_guide_src/source/libraries/security.rst b/user_guide_src/source/libraries/security.rst
new file mode 100644
index 000000000..8ee0c6e77
--- /dev/null
+++ b/user_guide_src/source/libraries/security.rst
@@ -0,0 +1,93 @@
+##############
+Security Class
+##############
+
+The Security Class contains methods that help you create a secure
+application, processing input data for security.
+
+XSS Filtering
+=============
+
+CodeIgniter comes with a Cross Site Scripting Hack prevention filter
+which can either run automatically to filter all POST and COOKIE data
+that is encountered, or you can run it on a per item basis. By default
+it does **not** run globally since it requires a bit of processing
+overhead, and since you may not need it in all cases.
+
+The XSS filter looks for commonly used techniques to trigger Javascript
+or other types of code that attempt to hijack cookies or do other
+malicious things. If anything disallowed is encountered it is rendered
+safe by converting the data to character entities.
+
+Note: This function should only be used to deal with data upon
+submission. It's not something that should be used for general runtime
+processing since it requires a fair amount of processing overhead.
+
+To filter data through the XSS filter use this function:
+
+$this->security->xss_clean()
+=============================
+
+Here is an usage example::
+
+	$data = $this->security->xss_clean($data);
+
+If you want the filter to run automatically every time it encounters
+POST or COOKIE data you can enable it by opening your
+application/config/config.php file and setting this::
+
+	$config['global_xss_filtering'] = TRUE;
+
+Note: If you use the form validation class, it gives you the option of
+XSS filtering as well.
+
+An optional second parameter, is_image, allows this function to be used
+to test images for potential XSS attacks, useful for file upload
+security. When this second parameter is set to TRUE, instead of
+returning an altered string, the function returns TRUE if the image is
+safe, and FALSE if it contained potentially malicious information that a
+browser may attempt to execute.
+
+::
+
+	if ($this->security->xss_clean($file, TRUE) === FALSE)
+	{
+	    // file failed the XSS test
+	}
+
+$this->security->sanitize_filename()
+=====================================
+
+When accepting filenames from user input, it is best to sanitize them to
+prevent directory traversal and other security related issues. To do so,
+use the sanitize_filename() method of the Security class. Here is an
+example::
+
+	$filename = $this->security->sanitize_filename($this->input->post('filename'));
+
+If it is acceptable for the user input to include relative paths, e.g.
+file/in/some/approved/folder.txt, you can set the second optional
+parameter, $relative_path to TRUE.
+
+::
+
+	$filename = $this->security->sanitize_filename($this->input->post('filename'), TRUE);
+
+Cross-site request forgery (CSRF)
+=================================
+
+You can enable csrf protection by opening your
+application/config/config.php file and setting this::
+
+	$config['csrf_protection'] = TRUE;
+
+If you use the :doc:`form helper <../helpers/form_helper>` the
+form_open() function will automatically insert a hidden csrf field in
+your forms.
+
+Select URIs can be whitelisted from csrf protection (for example API
+endpoints expecting externally POSTed content). You can add these URIs
+by editing the 'csrf_exclude_uris' config parameter::
+
+	$config['csrf_exclude_uris'] = array('api/person/add');
+
diff --git a/user_guide_src/source/libraries/sessions.rst b/user_guide_src/source/libraries/sessions.rst
new file mode 100644
index 000000000..ef32f5d71
--- /dev/null
+++ b/user_guide_src/source/libraries/sessions.rst
@@ -0,0 +1,306 @@
+#############
+Session Class
+#############
+
+The Session class permits you maintain a user's "state" and track their
+activity while they browse your site. The Session class stores session
+information for each user as serialized (and optionally encrypted) data
+in a cookie. It can also store the session data in a database table for
+added security, as this permits the session ID in the user's cookie to
+be matched against the stored session ID. By default only the cookie is
+saved. If you choose to use the database option you'll need to create
+the session table as indicated below.
+
+.. note:: The Session class does **not** utilize native PHP sessions. It
+	generates its own session data, offering more flexibility for
+	developers.
+
+.. note:: Even if you are not using encrypted sessions, you must set
+	an :doc:`encryption key <./encryption>` in your config file which is used
+	to aid in preventing session data manipulation.
+
+Initializing a Session
+======================
+
+Sessions will typically run globally with each page load, so the session
+class must either be :doc:`initialized <../general/libraries>` in your
+:doc:`controller <../general/controllers>` constructors, or it can be
+:doc:`auto-loaded <../general/autoloader>` by the system. For the most
+part the session class will run unattended in the background, so simply
+initializing the class will cause it to read, create, and update
+sessions.
+
+To initialize the Session class manually in your controller constructor,
+use the $this->load->library function::
+
+	$this->load->library('session');
+
+Once loaded, the Sessions library object will be available using:
+$this->session
+
+How do Sessions work?
+=====================
+
+When a page is loaded, the session class will check to see if valid
+session data exists in the user's session cookie. If sessions data does
+**not** exist (or if it has expired) a new session will be created and
+saved in the cookie. If a session does exist, its information will be
+updated and the cookie will be updated. With each update, the
+session_id will be regenerated.
+
+It's important for you to understand that once initialized, the Session
+class runs automatically. There is nothing you need to do to cause the
+above behavior to happen. You can, as you'll see below, work with
+session data or even add your own data to a user's session, but the
+process of reading, writing, and updating a session is automatic.
+
+What is Session Data?
+=====================
+
+A *session*, as far as CodeIgniter is concerned, is simply an array
+containing the following information:
+
+-  The user's unique Session ID (this is a statistically random string
+   with very strong entropy, hashed with MD5 for portability, and
+   regenerated (by default) every five minutes)
+-  The user's IP Address
+-  The user's User Agent data (the first 120 characters of the browser
+   data string)
+-  The "last activity" time stamp.
+
+The above data is stored in a cookie as a serialized array with this
+prototype::
+
+	[array]
+	(
+	     'session_id'    => random hash,
+	     'ip_address'    => 'string - user IP address',
+	     'user_agent'    => 'string - user agent data',
+	     'last_activity' => timestamp
+	)
+
+If you have the encryption option enabled, the serialized array will be
+encrypted before being stored in the cookie, making the data highly
+secure and impervious to being read or altered by someone. More info
+regarding encryption can be :doc:`found here <encryption>`, although
+the Session class will take care of initializing and encrypting the data
+automatically.
+
+Note: Session cookies are only updated every five minutes by default to
+reduce processor load. If you repeatedly reload a page you'll notice
+that the "last activity" time only updates if five minutes or more has
+passed since the last time the cookie was written. This time is
+configurable by changing the $config['sess_time_to_update'] line in
+your system/config/config.php file.
+
+Retrieving Session Data
+=======================
+
+Any piece of information from the session array is available using the
+following function::
+
+	$this->session->userdata('item');
+
+Where item is the array index corresponding to the item you wish to
+fetch. For example, to fetch the session ID you will do this::
+
+	$session_id = $this->session->userdata('session_id');
+
+.. note:: The function returns FALSE (boolean) if the item you are
+	trying to access does not exist.
+
+Adding Custom Session Data
+==========================
+
+A useful aspect of the session array is that you can add your own data
+to it and it will be stored in the user's cookie. Why would you want to
+do this? Here's one example:
+
+Let's say a particular user logs into your site. Once authenticated, you
+could add their username and email address to the session cookie, making
+that data globally available to you without having to run a database
+query when you need it.
+
+To add your data to the session array involves passing an array
+containing your new data to this function::
+
+	$this->session->set_userdata($array);
+
+Where $array is an associative array containing your new data. Here's an
+example::
+
+	$newdata = array(
+	                   'username'  => 'johndoe',
+	                   'email'     => 'johndoe@some-site.com',
+	                   'logged_in' => TRUE
+	               );
+
+	$this->session->set_userdata($newdata);
+
+If you want to add userdata one value at a time, set_userdata() also
+supports this syntax.
+
+::
+
+	$this->session->set_userdata('some_name', 'some_value');
+
+
+.. note:: Cookies can only hold 4KB of data, so be careful not to exceed
+	the capacity. The encryption process in particular produces a longer
+	data string than the original so keep careful track of how much data you
+	are storing.
+
+Retrieving All Session Data
+===========================
+
+An array of all userdata can be retrieved as follows::
+
+	$this->session->all_userdata()
+
+And returns an associative array like the following::
+
+	Array
+	(
+	    [session_id] => 4a5a5dca22728fb0a84364eeb405b601
+	    [ip_address] => 127.0.0.1
+	    [user_agent] => Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_7;
+	    [last_activity] => 1303142623
+	)
+
+Removing Session Data
+=====================
+
+Just as set_userdata() can be used to add information into a session,
+unset_userdata() can be used to remove it, by passing the session key.
+For example, if you wanted to remove 'some_name' from your session
+information::
+
+	$this->session->unset_userdata('some_name');
+
+
+This function can also be passed an associative array of items to unset.
+
+::
+
+	$array_items = array('username' => '', 'email' => '');
+
+	$this->session->unset_userdata($array_items);
+
+
+Flashdata
+=========
+
+CodeIgniter supports "flashdata", or session data that will only be
+available for the next server request, and are then automatically
+cleared. These can be very useful, and are typically used for
+informational or status messages (for example: "record 2 deleted").
+
+Note: Flash variables are prefaced with "flash\_" so avoid this prefix
+in your own session names.
+
+To add flashdata::
+
+	$this->session->set_flashdata('item', 'value');
+
+
+You can also pass an array to set_flashdata(), in the same manner as
+set_userdata().
+
+To read a flashdata variable::
+
+	$this->session->flashdata('item');
+
+
+If you find that you need to preserve a flashdata variable through an
+additional request, you can do so using the keep_flashdata() function.
+
+::
+
+	$this->session->keep_flashdata('item');
+
+
+Saving Session Data to a Database
+=================================
+
+While the session data array stored in the user's cookie contains a
+Session ID, unless you store session data in a database there is no way
+to validate it. For some applications that require little or no
+security, session ID validation may not be needed, but if your
+application requires security, validation is mandatory. Otherwise, an
+old session could be restored by a user modifying their cookies.
+
+When session data is available in a database, every time a valid session
+is found in the user's cookie, a database query is performed to match
+it. If the session ID does not match, the session is destroyed. Session
+IDs can never be updated, they can only be generated when a new session
+is created.
+
+In order to store sessions, you must first create a database table for
+this purpose. Here is the basic prototype (for MySQL) required by the
+session class::
+
+	CREATE TABLE IF NOT EXISTS  `ci_sessions` (
+		session_id varchar(40) DEFAULT '0' NOT NULL,
+		ip_address varchar(16) DEFAULT '0' NOT NULL,
+		user_agent varchar(120) NOT NULL,
+		last_activity int(10) unsigned DEFAULT 0 NOT NULL,
+		user_data text NOT NULL,
+		PRIMARY KEY (session_id),
+		KEY `last_activity_idx` (`last_activity`)
+	);
+
+.. note:: By default the table is called ci_sessions, but you can name
+	it anything you want as long as you update the
+	application/config/config.php file so that it contains the name you have
+	chosen. Once you have created your database table you can enable the
+	database option in your config.php file as follows::
+
+		$config['sess_use_database'] = TRUE;
+
+	Once enabled, the Session class will store session data in the DB.
+
+	Make sure you've specified the table name in your config file as well::
+
+		$config['sess_table_name'] = 'ci_sessions';
+
+.. note:: The Session class has built-in garbage collection which clears
+	out expired sessions so you do not need to write your own routine to do
+	it.
+
+Destroying a Session
+====================
+
+To clear the current session::
+
+	$this->session->sess_destroy();
+
+.. note:: This function should be the last one called, and even flash
+	variables will no longer be available. If you only want some items
+	destroyed and not all, use unset_userdata().
+
+Session Preferences
+===================
+
+You'll find the following Session related preferences in your
+application/config/config.php file:
+
+=========================== =============== =========================== ==========================================================================
+Preference                  Default         Options                     Description
+=========================== =============== =========================== ==========================================================================
+**sess_cookie_name**        ci_session      None                        The name you want the session cookie saved as.
+**sess_expiration**         7200            None                        The number of seconds you would like the session to last. The default
+                                                                        value is 2 hours (7200 seconds). If you would like a non-expiring
+                                                                        session set the value to zero: 0
+**sess_expire_on_close**    FALSE           TRUE/FALSE (boolean)        Whether to cause the session to expire automatically when the browser
+                                                                        window is closed.
+**sess_encrypt_cookie**     FALSE           TRUE/FALSE (boolean)        Whether to encrypt the session data.
+**sess_use_database**       FALSE           TRUE/FALSE (boolean)        Whether to save the session data to a database. You must create the
+                                                                        table before enabling this option.
+**sess_table_name**         ci_sessions     Any valid SQL table name    The name of the session database table.
+**sess_time_to_update**     300             Time in seconds             This options controls how often the session class will regenerate itself
+                                                                        and create a new session id.
+**sess_match_ip**           FALSE           TRUE/FALSE (boolean)        Whether to match the user's IP address when reading the session data.
+                                                                        Note that some ISPs dynamically changes the IP, so if you want a
+                                                                        non-expiring session you will likely set this to FALSE.
+**sess_match_useragent**    TRUE            TRUE/FALSE (boolean)        Whether to match the User Agent when reading the session data.
+=========================== =============== =========================== ==========================================================================
\ No newline at end of file
diff --git a/user_guide_src/source/libraries/table.rst b/user_guide_src/source/libraries/table.rst
new file mode 100644
index 000000000..9bc3f3423
--- /dev/null
+++ b/user_guide_src/source/libraries/table.rst
@@ -0,0 +1,267 @@
+################
+HTML Table Class
+################
+
+The Table Class provides functions that enable you to auto-generate HTML
+tables from arrays or database result sets.
+
+Initializing the Class
+======================
+
+Like most other classes in CodeIgniter, the Table class is initialized
+in your controller using the $this->load->library function::
+
+	$this->load->library('table');
+
+Once loaded, the Table library object will be available using:
+$this->table
+
+Examples
+========
+
+Here is an example showing how you can create a table from a
+multi-dimensional array. Note that the first array index will become the
+table heading (or you can set your own headings using the set_heading()
+function described in the function reference below).
+
+::
+
+	$this->load->library('table');
+
+	$data = array(
+	             array('Name', 'Color', 'Size'),
+	             array('Fred', 'Blue', 'Small'),
+	             array('Mary', 'Red', 'Large'),
+	             array('John', 'Green', 'Medium')	
+	             );
+
+	echo $this->table->generate($data);
+
+Here is an example of a table created from a database query result. The
+table class will automatically generate the headings based on the table
+names (or you can set your own headings using the set_heading()
+function described in the function reference below).
+
+::
+
+	$this->load->library('table');
+
+	$query = $this->db->query("SELECT * FROM my_table");
+
+	echo $this->table->generate($query);
+
+Here is an example showing how you might create a table using discrete
+parameters::
+
+	$this->load->library('table');
+
+	$this->table->set_heading('Name', 'Color', 'Size');
+
+	$this->table->add_row('Fred', 'Blue', 'Small');
+	$this->table->add_row('Mary', 'Red', 'Large');
+	$this->table->add_row('John', 'Green', 'Medium');
+
+	echo $this->table->generate();
+
+Here is the same example, except instead of individual parameters,
+arrays are used::
+
+	$this->load->library('table');
+
+	$this->table->set_heading(array('Name', 'Color', 'Size'));
+
+	$this->table->add_row(array('Fred', 'Blue', 'Small'));
+	$this->table->add_row(array('Mary', 'Red', 'Large'));
+	$this->table->add_row(array('John', 'Green', 'Medium'));
+
+	echo $this->table->generate();
+
+Changing the Look of Your Table
+===============================
+
+The Table Class permits you to set a table template with which you can
+specify the design of your layout. Here is the template prototype::
+
+	$tmpl = array (
+	                    'table_open'          => '<table border="0" cellpadding="4" cellspacing="0">',
+
+	                    'heading_row_start'   => '<tr>',
+	                    'heading_row_end'     => '</tr>',
+	                    'heading_cell_start'  => '<th>',
+	                    'heading_cell_end'    => '</th>',
+
+	                    'row_start'           => '<tr>',
+	                    'row_end'             => '</tr>',
+	                    'cell_start'          => '<td>',
+	                    'cell_end'            => '</td>',
+
+	                    'row_alt_start'       => '<tr>',
+	                    'row_alt_end'         => '</tr>',
+	                    'cell_alt_start'      => '<td>',
+	                    'cell_alt_end'        => '</td>',
+
+	                    'table_close'         => '</table>'
+	              );
+
+	$this->table->set_template($tmpl);
+
+.. note:: You'll notice there are two sets of "row" blocks in the
+	template. These permit you to create alternating row colors or design
+	elements that alternate with each iteration of the row data.
+
+You are NOT required to submit a complete template. If you only need to
+change parts of the layout you can simply submit those elements. In this
+example, only the table opening tag is being changed::
+
+	$tmpl = array ( 'table_open'  => '<table border="1" cellpadding="2" cellspacing="1" class="mytable">' );
+
+	$this->table->set_template($tmpl);
+
+******************
+Function Reference
+******************
+
+$this->table->generate()
+========================
+
+Returns a string containing the generated table. Accepts an optional
+parameter which can be an array or a database result object.
+
+$this->table->set_caption()
+============================
+
+Permits you to add a caption to the table.
+
+::
+
+	$this->table->set_caption('Colors');
+
+$this->table->set_heading()
+============================
+
+Permits you to set the table heading. You can submit an array or
+discrete params::
+
+	$this->table->set_heading('Name', 'Color', 'Size');
+
+::
+
+	$this->table->set_heading(array('Name', 'Color', 'Size'));
+
+$this->table->add_row()
+========================
+
+Permits you to add a row to your table. You can submit an array or
+discrete params::
+
+	$this->table->add_row('Blue', 'Red', 'Green');
+
+::
+
+	$this->table->add_row(array('Blue', 'Red', 'Green'));
+
+If you would like to set an individual cell's tag attributes, you can
+use an associative array for that cell. The associative key 'data'
+defines the cell's data. Any other key => val pairs are added as
+key='val' attributes to the tag::
+
+	$cell = array('data' => 'Blue', 'class' => 'highlight', 'colspan' => 2);
+	$this->table->add_row($cell, 'Red', 'Green');
+
+	// generates
+	// <td class='highlight' colspan='2'>Blue</td><td>Red</td><td>Green</td>
+
+$this->table->make_columns()
+=============================
+
+This function takes a one-dimensional array as input and creates a
+multi-dimensional array with a depth equal to the number of columns
+desired. This allows a single array with many elements to be displayed
+in a table that has a fixed column count. Consider this example::
+
+	$list = array('one', 'two', 'three', 'four', 'five', 'six', 'seven', 'eight', 'nine', 'ten', 'eleven', 'twelve');
+
+	$new_list = $this->table->make_columns($list, 3);
+
+	$this->table->generate($new_list);
+
+	// Generates a table with this prototype
+
+	<table border="0" cellpadding="4" cellspacing="0">
+	<tr>
+	<td>one</td><td>two</td><td>three</td>
+	</tr><tr>
+	<td>four</td><td>five</td><td>six</td>
+	</tr><tr>
+	<td>seven</td><td>eight</td><td>nine</td>
+	</tr><tr>
+	<td>ten</td><td>eleven</td><td>twelve</td></tr>
+	</table>
+
+$this->table->set_template()
+=============================
+
+Permits you to set your template. You can submit a full or partial
+template.
+
+::
+
+	$tmpl = array ( 'table_open'  => '<table border="1" cellpadding="2" cellspacing="1" class="mytable">' );
+
+	$this->table->set_template($tmpl);
+
+$this->table->set_empty()
+==========================
+
+Let's you set a default value for use in any table cells that are empty.
+You might, for example, set a non-breaking space::
+
+	 $this->table->set_empty("&nbsp;");
+
+$this->table->clear()
+=====================
+
+Lets you clear the table heading and row data. If you need to show
+multiple tables with different data you should to call this function
+after each table has been generated to empty the previous table
+information. Example::
+
+	$this->load->library('table');
+
+	$this->table->set_heading('Name', 'Color', 'Size');
+	$this->table->add_row('Fred', 'Blue', 'Small');
+	$this->table->add_row('Mary', 'Red', 'Large');
+	$this->table->add_row('John', 'Green', 'Medium');
+
+	echo $this->table->generate();
+
+	$this->table->clear();
+
+	$this->table->set_heading('Name', 'Day', 'Delivery');
+	$this->table->add_row('Fred', 'Wednesday', 'Express');
+	$this->table->add_row('Mary', 'Monday', 'Air');
+	$this->table->add_row('John', 'Saturday', 'Overnight');
+
+	echo $this->table->generate();
+
+$this->table->function
+======================
+
+Allows you to specify a native PHP function or a valid function array
+object to be applied to all cell data.
+
+::
+
+	$this->load->library('table');
+
+	$this->table->set_heading('Name', 'Color', 'Size');
+	$this->table->add_row('Fred', '<strong>Blue</strong>', 'Small');
+
+	$this->table->function = 'htmlspecialchars';
+	echo $this->table->generate();
+
+In the above example, all cell data would be ran through PHP's
+htmlspecialchars() function, resulting in::
+
+	<td>Fred</td><td>&lt;strong&gt;Blue&lt;/strong&gt;</td><td>Small</td>
+
diff --git a/user_guide_src/source/libraries/trackback.rst b/user_guide_src/source/libraries/trackback.rst
new file mode 100644
index 000000000..07b2b2177
--- /dev/null
+++ b/user_guide_src/source/libraries/trackback.rst
@@ -0,0 +1,201 @@
+###############
+Trackback Class
+###############
+
+The Trackback Class provides functions that enable you to send and
+receive Trackback data.
+
+If you are not familiar with Trackbacks you'll find more information
+`here <http://en.wikipedia.org/wiki/Trackback>`_.
+
+Initializing the Class
+======================
+
+Like most other classes in CodeIgniter, the Trackback class is
+initialized in your controller using the $this->load->library function::
+
+	$this->load->library('trackback');
+
+Once loaded, the Trackback library object will be available using:
+$this->trackback
+
+Sending Trackbacks
+==================
+
+A Trackback can be sent from any of your controller functions using code
+similar to this example::
+
+	$this->load->library('trackback');
+
+	$tb_data = array(
+	                'ping_url'  => 'http://example.com/trackback/456',
+	                'url'       => 'http://www.my-example.com/blog/entry/123',
+	                'title'     => 'The Title of My Entry',
+	                'excerpt'   => 'The entry content.',
+	                'blog_name' => 'My Blog Name',
+	                'charset'   => 'utf-8'
+	                );
+
+	if ( ! $this->trackback->send($tb_data))
+	{
+	     echo $this->trackback->display_errors();
+	}
+	else
+	{
+	     echo 'Trackback was sent!';
+	}
+
+Description of array data:
+
+-  **ping_url** - The URL of the site you are sending the Trackback to.
+   You can send Trackbacks to multiple URLs by separating each URL with
+   a comma.
+-  **url** - The URL to YOUR site where the weblog entry can be seen.
+-  **title** - The title of your weblog entry.
+-  **excerpt** - The content of your weblog entry. Note: the Trackback
+   class will automatically send only the first 500 characters of your
+   entry. It will also strip all HTML.
+-  **blog_name** - The name of your weblog.
+-  **charset** - The character encoding your weblog is written in. If
+   omitted, UTF-8 will be used.
+
+The Trackback sending function returns TRUE/FALSE (boolean) on success
+or failure. If it fails, you can retrieve the error message using::
+
+	$this->trackback->display_errors();
+
+Receiving Trackbacks
+====================
+
+Before you can receive Trackbacks you must create a weblog. If you don't
+have a blog yet there's no point in continuing.
+
+Receiving Trackbacks is a little more complex than sending them, only
+because you will need a database table in which to store them, and you
+will need to validate the incoming trackback data. You are encouraged to
+implement a thorough validation process to guard against spam and
+duplicate data. You may also want to limit the number of Trackbacks you
+allow from a particular IP within a given span of time to further
+curtail spam. The process of receiving a Trackback is quite simple; the
+validation is what takes most of the effort.
+
+Your Ping URL
+=============
+
+In order to accept Trackbacks you must display a Trackback URL next to
+each one of your weblog entries. This will be the URL that people will
+use to send you Trackbacks (we will refer to this as your "Ping URL").
+
+Your Ping URL must point to a controller function where your Trackback
+receiving code is located, and the URL must contain the ID number for
+each particular entry, so that when the Trackback is received you'll be
+able to associate it with a particular entry.
+
+For example, if your controller class is called Trackback, and the
+receiving function is called receive, your Ping URLs will look something
+like this::
+
+	http://example.com/index.php/trackback/receive/entry_id
+
+Where entry_id represents the individual ID number for each of your
+entries.
+
+Creating a Trackback Table
+==========================
+
+Before you can receive Trackbacks you must create a table in which to
+store them. Here is a basic prototype for such a table::
+
+	CREATE TABLE trackbacks (
+	 tb_id int(10) unsigned NOT NULL auto_increment,
+	 entry_id int(10) unsigned NOT NULL default 0,
+	 url varchar(200) NOT NULL,
+	 title varchar(100) NOT NULL,
+	 excerpt text NOT NULL,
+	 blog_name varchar(100) NOT NULL,
+	 tb_date int(10) NOT NULL,
+	 ip_address varchar(16) NOT NULL,
+	 PRIMARY KEY `tb_id` (`tb_id`),
+	 KEY `entry_id` (`entry_id`)
+	);
+
+The Trackback specification only requires four pieces of information to
+be sent in a Trackback (url, title, excerpt, blog_name), but to make
+the data more useful we've added a few more fields in the above table
+schema (date, IP address, etc.).
+
+Processing a Trackback
+======================
+
+Here is an example showing how you will receive and process a Trackback.
+The following code is intended for use within the controller function
+where you expect to receive Trackbacks.
+
+::
+
+	$this->load->library('trackback');
+	$this->load->database();
+
+	if ($this->uri->segment(3) == FALSE)
+	{
+	    $this->trackback->send_error("Unable to determine the entry ID");
+	}
+
+	if ( ! $this->trackback->receive())
+	{
+	    $this->trackback->send_error("The Trackback did not contain valid data");
+	}
+
+	$data = array(
+	                'tb_id'      => '',
+	                'entry_id'   => $this->uri->segment(3),
+	                'url'        => $this->trackback->data('url'),
+	                'title'      => $this->trackback->data('title'),
+	                'excerpt'    => $this->trackback->data('excerpt'),
+	                'blog_name'  => $this->trackback->data('blog_name'),
+	                'tb_date'    => time(),
+	                'ip_address' => $this->input->ip_address()
+	                );
+
+	$sql = $this->db->insert_string('trackbacks', $data);
+	$this->db->query($sql);
+
+	$this->trackback->send_success();
+
+Notes:
+^^^^^^
+
+The entry ID number is expected in the third segment of your URL. This
+is based on the URI example we gave earlier::
+
+	http://example.com/index.php/trackback/receive/entry_id
+
+Notice the entry_id is in the third URI segment, which you can retrieve
+using::
+
+	$this->uri->segment(3);
+
+In our Trackback receiving code above, if the third segment is missing,
+we will issue an error. Without a valid entry ID, there's no reason to
+continue.
+
+The $this->trackback->receive() function is simply a validation function
+that looks at the incoming data and makes sure it contains the four
+pieces of data that are required (url, title, excerpt, blog_name). It
+returns TRUE on success and FALSE on failure. If it fails you will issue
+an error message.
+
+The incoming Trackback data can be retrieved using this function::
+
+	$this->trackback->data('item')
+
+Where item represents one of these four pieces of info: url, title,
+excerpt, or blog_name
+
+If the Trackback data is successfully received, you will issue a success
+message using::
+
+	$this->trackback->send_success();
+
+.. note:: The above code contains no data validation, which you are
+	encouraged to add.
diff --git a/user_guide_src/source/libraries/typography.rst b/user_guide_src/source/libraries/typography.rst
new file mode 100644
index 000000000..db3f227be
--- /dev/null
+++ b/user_guide_src/source/libraries/typography.rst
@@ -0,0 +1,105 @@
+################
+Typography Class
+################
+
+The Typography Class provides functions that help you format text.
+
+Initializing the Class
+======================
+
+Like most other classes in CodeIgniter, the Typography class is
+initialized in your controller using the $this->load->library function::
+
+	$this->load->library('typography');
+
+Once loaded, the Typography library object will be available using:
+$this->typography
+
+auto_typography()
+==================
+
+Formats text so that it is semantically and typographically correct
+HTML. Takes a string as input and returns it with the following
+formatting:
+
+-  Surrounds paragraphs within <p></p> (looks for double line breaks to
+   identify paragraphs).
+-  Single line breaks are converted to <br />, except those that appear
+   within <pre> tags.
+-  Block level elements, like <div> tags, are not wrapped within
+   paragraphs, but their contained text is if it contains paragraphs.
+-  Quotes are converted to correctly facing curly quote entities, except
+   those that appear within tags.
+-  Apostrophes are converted to curly apostrophe entities.
+-  Double dashes (either like -- this or like--this) are converted to
+   em—dashes.
+-  Three consecutive periods either preceding or following a word are
+   converted to ellipsis…
+-  Double spaces following sentences are converted to non-breaking
+   spaces to mimic double spacing.
+
+Usage example::
+
+	$string = $this->typography->auto_typography($string);
+
+Parameters
+----------
+
+There is one optional parameters that determines whether the parser
+should reduce more then two consecutive line breaks down to two. Use
+boolean TRUE or FALSE.
+
+By default the parser does not reduce line breaks. In other words, if no
+parameters are submitted, it is the same as doing this::
+
+	$string = $this->typography->auto_typography($string, FALSE);
+
+.. note:: Typographic formatting can be processor intensive,
+	particularly if you have a lot of content being formatted. If you choose
+	to use this function you may want to consider :doc:`caching <../general/caching>`
+	your pages.
+
+format_characters()
+====================
+
+This function is similar to the auto_typography function above, except
+that it only does character conversion:
+
+-  Quotes are converted to correctly facing curly quote entities, except
+   those that appear within tags.
+-  Apostrophes are converted to curly apostrophe entities.
+-  Double dashes (either like -- this or like--this) are converted to
+   em—dashes.
+-  Three consecutive periods either preceding or following a word are
+   converted to ellipsis…
+-  Double spaces following sentences are converted to non-breaking
+   spaces to mimic double spacing.
+
+Usage example::
+
+	$string = $this->typography->format_characters($string);
+
+nl2br_except_pre()
+====================
+
+Converts newlines to <br /> tags unless they appear within <pre> tags.
+This function is identical to the native PHP nl2br() function, except
+that it ignores <pre> tags.
+
+Usage example::
+
+	$string = $this->typography->nl2br_except_pre($string);
+
+protect_braced_quotes
+=======================
+
+When using the Typography library in conjunction with the Template
+Parser library it can often be desirable to protect single and double
+quotes within curly braces. To enable this, set the
+protect_braced_quotes class property to TRUE.
+
+Usage example::
+
+	$this->load->library('typography');
+	$this->typography->protect_braced_quotes = TRUE;
+
diff --git a/user_guide_src/source/libraries/unit_testing.rst b/user_guide_src/source/libraries/unit_testing.rst
new file mode 100644
index 000000000..03819b27c
--- /dev/null
+++ b/user_guide_src/source/libraries/unit_testing.rst
@@ -0,0 +1,164 @@
+##################
+Unit Testing Class
+##################
+
+Unit testing is an approach to software development in which tests are
+written for each function in your application. If you are not familiar
+with the concept you might do a little googling on the subject.
+
+CodeIgniter's Unit Test class is quite simple, consisting of an
+evaluation function and two result functions. It's not intended to be a
+full-blown test suite but rather a simple mechanism to evaluate your
+code to determine if it is producing the correct data type and result.
+
+Initializing the Class
+======================
+
+Like most other classes in CodeIgniter, the Unit Test class is
+initialized in your controller using the $this->load->library function::
+
+	$this->load->library('unit_test');
+
+Once loaded, the Unit Test object will be available using: $this->unit
+
+Running Tests
+=============
+
+Running a test involves supplying a test and an expected result to the
+following function:
+
+$this->unit->run( test, expected result, 'test name', 'notes');
+===============================================================
+
+Where test is the result of the code you wish to test, expected result
+is the data type you expect, test name is an optional name you can give
+your test, and notes are optional notes. Example::
+
+	$test = 1 + 1;
+
+	$expected_result = 2;
+
+	$test_name = 'Adds one plus one';
+
+	$this->unit->run($test, $expected_result, $test_name);
+
+The expected result you supply can either be a literal match, or a data
+type match. Here's an example of a literal::
+
+	$this->unit->run('Foo', 'Foo');
+
+Here is an example of a data type match::
+
+	$this->unit->run('Foo', 'is_string');
+
+Notice the use of "is_string" in the second parameter? This tells the
+function to evaluate whether your test is producing a string as the
+result. Here is a list of allowed comparison types:
+
+-  is_object
+-  is_string
+-  is_bool
+-  is_true
+-  is_false
+-  is_int
+-  is_numeric
+-  is_float
+-  is_double
+-  is_array
+-  is_null
+
+Generating Reports
+==================
+
+You can either display results after each test, or your can run several
+tests and generate a report at the end. To show a report directly simply
+echo or return the run function::
+
+	echo $this->unit->run($test, $expected_result);
+
+To run a full report of all tests, use this::
+
+	echo $this->unit->report();
+
+The report will be formatted in an HTML table for viewing. If you prefer
+the raw data you can retrieve an array using::
+
+	echo $this->unit->result();
+
+Strict Mode
+===========
+
+By default the unit test class evaluates literal matches loosely.
+Consider this example::
+
+	$this->unit->run(1, TRUE);
+
+The test is evaluating an integer, but the expected result is a boolean.
+PHP, however, due to it's loose data-typing will evaluate the above code
+as TRUE using a normal equality test::
+
+	if (1 == TRUE) echo 'This evaluates as true';
+
+If you prefer, you can put the unit test class in to strict mode, which
+will compare the data type as well as the value::
+
+	if (1 === TRUE) echo 'This evaluates as FALSE';
+
+To enable strict mode use this::
+
+	$this->unit->use_strict(TRUE);
+
+Enabling/Disabling Unit Testing
+===============================
+
+If you would like to leave some testing in place in your scripts, but
+not have it run unless you need it, you can disable unit testing using::
+
+	$this->unit->active(FALSE)
+
+Unit Test Display
+=================
+
+When your unit test results display, the following items show by
+default:
+
+-  Test Name (test_name)
+-  Test Datatype (test_datatype)
+-  Expected Datatype (res_datatype)
+-  Result (result)
+-  File Name (file)
+-  Line Number (line)
+-  Any notes you entered for the test (notes)
+
+You can customize which of these items get displayed by using
+$this->unit->set_items(). For example, if you only wanted the test name
+and the result displayed:
+
+Customizing displayed tests
+---------------------------
+
+::
+
+	$this->unit->set_test_items(array('test_name', 'result'));
+
+Creating a Template
+-------------------
+
+If you would like your test results formatted differently then the
+default you can set your own template. Here is an example of a simple
+template. Note the required pseudo-variables::
+
+	$str = '
+	<table border="0" cellpadding="4" cellspacing="1">
+	    {rows}
+	        <tr>
+	        <td>{item}</td>
+	        <td>{result}</td>
+	        </tr>
+	    {/rows}
+	</table>';
+
+	$this->unit->set_template($str);
+
+.. note:: Your template must be declared **before** running the unit
+	test process.
diff --git a/user_guide_src/source/libraries/uri.rst b/user_guide_src/source/libraries/uri.rst
new file mode 100644
index 000000000..ee60b77d7
--- /dev/null
+++ b/user_guide_src/source/libraries/uri.rst
@@ -0,0 +1,188 @@
+#########
+URI Class
+#########
+
+The URI Class provides functions that help you retrieve information from
+your URI strings. If you use URI routing, you can also retrieve
+information about the re-routed segments.
+
+.. note:: This class is initialized automatically by the system so there
+	is no need to do it manually.
+
+$this->uri->segment(n)
+======================
+
+Permits you to retrieve a specific segment. Where n is the segment
+number you wish to retrieve. Segments are numbered from left to right.
+For example, if your full URL is this::
+
+	http://example.com/index.php/news/local/metro/crime_is_up
+
+The segment numbers would be this:
+
+#. news
+#. local
+#. metro
+#. crime_is_up
+
+By default the function returns FALSE (boolean) if the segment does not
+exist. There is an optional second parameter that permits you to set
+your own default value if the segment is missing. For example, this
+would tell the function to return the number zero in the event of
+failure::
+
+	$product_id = $this->uri->segment(3, 0);
+
+It helps avoid having to write code like this::
+
+	if ($this->uri->segment(3) === FALSE)
+	{
+	    $product_id = 0;
+	}
+	else
+	{
+	    $product_id = $this->uri->segment(3);
+	}
+
+$this->uri->rsegment(n)
+=======================
+
+This function is identical to the previous one, except that it lets you
+retrieve a specific segment from your re-routed URI in the event you are
+using CodeIgniter's :doc:`URI Routing <../general/routing>` feature.
+
+$this->uri->slash_segment(n)
+=============================
+
+This function is almost identical to $this->uri->segment(), except it
+adds a trailing and/or leading slash based on the second parameter. If
+the parameter is not used, a trailing slash added. Examples::
+
+	$this->uri->slash_segment(3);
+	$this->uri->slash_segment(3, 'leading');
+	$this->uri->slash_segment(3, 'both');
+
+Returns:
+
+#. segment/
+#. /segment
+#. /segment/
+
+$this->uri->slash_rsegment(n)
+==============================
+
+This function is identical to the previous one, except that it lets you
+add slashes a specific segment from your re-routed URI in the event you
+are using CodeIgniter's :doc:`URI Routing <../general/routing>`
+feature.
+
+$this->uri->uri_to_assoc(n)
+=============================
+
+This function lets you turn URI segments into and associative array of
+key/value pairs. Consider this URI::
+
+	index.php/user/search/name/joe/location/UK/gender/male
+
+Using this function you can turn the URI into an associative array with
+this prototype::
+
+	[array]
+	(
+	    'name' => 'joe'
+	    'location'	=> 'UK'
+	    'gender'	=> 'male'
+	)
+
+The first parameter of the function lets you set an offset. By default
+it is set to 3 since your URI will normally contain a
+controller/function in the first and second segments. Example::
+
+	$array = $this->uri->uri_to_assoc(3);
+
+	echo $array['name'];
+
+The second parameter lets you set default key names, so that the array
+returned by the function will always contain expected indexes, even if
+missing from the URI. Example::
+
+	$default = array('name', 'gender', 'location', 'type', 'sort');
+
+	$array = $this->uri->uri_to_assoc(3, $default);
+
+If the URI does not contain a value in your default, an array index will
+be set to that name, with a value of FALSE.
+
+Lastly, if a corresponding value is not found for a given key (if there
+is an odd number of URI segments) the value will be set to FALSE
+(boolean).
+
+$this->uri->ruri_to_assoc(n)
+==============================
+
+This function is identical to the previous one, except that it creates
+an associative array using the re-routed URI in the event you are using
+CodeIgniter's :doc:`URI Routing <../general/routing>` feature.
+
+$this->uri->assoc_to_uri()
+============================
+
+Takes an associative array as input and generates a URI string from it.
+The array keys will be included in the string. Example::
+
+	$array = array('product' => 'shoes', 'size' => 'large', 'color' => 'red');
+
+	$str = $this->uri->assoc_to_uri($array);
+
+	// Produces: product/shoes/size/large/color/red
+
+$this->uri->uri_string()
+=========================
+
+Returns a string with the complete URI. For example, if this is your
+full URL::
+
+	http://example.com/index.php/news/local/345
+
+The function would return this::
+
+	/news/local/345
+
+$this->uri->ruri_string()
+==========================
+
+This function is identical to the previous one, except that it returns
+the re-routed URI in the event you are using CodeIgniter's :doc:`URI
+Routing <../general/routing>` feature.
+
+$this->uri->total_segments()
+=============================
+
+Returns the total number of segments.
+
+$this->uri->total_rsegments()
+==============================
+
+This function is identical to the previous one, except that it returns
+the total number of segments in your re-routed URI in the event you are
+using CodeIgniter's :doc:`URI Routing <../general/routing>` feature.
+
+$this->uri->segment_array()
+============================
+
+Returns an array containing the URI segments. For example::
+
+	$segs = $this->uri->segment_array();
+
+	foreach ($segs as $segment)
+	{
+	    echo $segment;
+	    echo '<br />';
+	}
+
+$this->uri->rsegment_array()
+=============================
+
+This function is identical to the previous one, except that it returns
+the array of segments in your re-routed URI in the event you are using
+CodeIgniter's :doc:`URI Routing <../general/routing>` feature.
diff --git a/user_guide_src/source/libraries/user_agent.rst b/user_guide_src/source/libraries/user_agent.rst
new file mode 100644
index 000000000..855ece29d
--- /dev/null
+++ b/user_guide_src/source/libraries/user_agent.rst
@@ -0,0 +1,200 @@
+################
+User Agent Class
+################
+
+The User Agent Class provides functions that help identify information
+about the browser, mobile device, or robot visiting your site. In
+addition you can get referrer information as well as language and
+supported character-set information.
+
+Initializing the Class
+======================
+
+Like most other classes in CodeIgniter, the User Agent class is
+initialized in your controller using the $this->load->library function::
+
+	$this->load->library('user_agent');
+
+Once loaded, the object will be available using: $this->agent
+
+User Agent Definitions
+======================
+
+The user agent name definitions are located in a config file located at:
+application/config/user_agents.php. You may add items to the various
+user agent arrays if needed.
+
+Example
+=======
+
+When the User Agent class is initialized it will attempt to determine
+whether the user agent browsing your site is a web browser, a mobile
+device, or a robot. It will also gather the platform information if it
+is available.
+
+::
+
+	$this->load->library('user_agent');
+
+	if ($this->agent->is_browser())
+	{
+	    $agent = $this->agent->browser().' '.$this->agent->version();
+	}
+	elseif ($this->agent->is_robot())
+	{
+	    $agent = $this->agent->robot();
+	}
+	elseif ($this->agent->is_mobile())
+	{
+	    $agent = $this->agent->mobile();
+	}
+	else
+	{
+	    $agent = 'Unidentified User Agent';
+	}
+
+	echo $agent;
+
+	echo $this->agent->platform(); // Platform info (Windows, Linux, Mac, etc.)
+
+******************
+Function Reference
+******************
+
+$this->agent->is_browser()
+===========================
+
+Returns TRUE/FALSE (boolean) if the user agent is a known web browser.
+
+::
+
+	if ($this->agent->is_browser('Safari'))
+	{
+	    echo 'You are using Safari.';
+	}
+	else if ($this->agent->is_browser())
+	{
+	    echo 'You are using a browser.';
+	}
+	
+
+.. note:: The string "Safari" in this example is an array key in the
+	list of browser definitions. You can find this list in
+	application/config/user_agents.php if you want to add new browsers or
+	change the stings.
+
+$this->agent->is_mobile()
+==========================
+
+Returns TRUE/FALSE (boolean) if the user agent is a known mobile device.
+
+::
+
+	if ($this->agent->is_mobile('iphone'))
+	{
+	    $this->load->view('iphone/home');
+	}
+	else if ($this->agent->is_mobile())
+	{
+	    $this->load->view('mobile/home');
+	}
+	else
+	{
+	    $this->load->view('web/home');
+	}
+	
+
+$this->agent->is_robot()
+=========================
+
+Returns TRUE/FALSE (boolean) if the user agent is a known robot.
+
+.. note:: The user agent library only contains the most common robot
+	definitions. It is not a complete list of bots. There are hundreds of
+	them so searching for each one would not be very efficient. If you find
+	that some bots that commonly visit your site are missing from the list
+	you can add them to your application/config/user_agents.php file.
+
+$this->agent->is_referral()
+============================
+
+Returns TRUE/FALSE (boolean) if the user agent was referred from another
+site.
+
+$this->agent->browser()
+=======================
+
+Returns a string containing the name of the web browser viewing your
+site.
+
+$this->agent->version()
+=======================
+
+Returns a string containing the version number of the web browser
+viewing your site.
+
+$this->agent->mobile()
+======================
+
+Returns a string containing the name of the mobile device viewing your
+site.
+
+$this->agent->robot()
+=====================
+
+Returns a string containing the name of the robot viewing your site.
+
+$this->agent->platform()
+========================
+
+Returns a string containing the platform viewing your site (Linux,
+Windows, OS X, etc.).
+
+$this->agent->referrer()
+========================
+
+The referrer, if the user agent was referred from another site.
+Typically you'll test for this as follows::
+
+	if ($this->agent->is_referral())
+	{
+	    echo $this->agent->referrer();
+	}
+
+$this->agent->agent_string()
+=============================
+
+Returns a string containing the full user agent string. Typically it
+will be something like this::
+
+	Mozilla/5.0 (Macintosh; U; Intel Mac OS X; en-US; rv:1.8.0.4) Gecko/20060613 Camino/1.0.2
+
+$this->agent->accept_lang()
+============================
+
+Lets you determine if the user agent accepts a particular language.
+Example::
+
+	if ($this->agent->accept_lang('en'))
+	{
+	    echo 'You accept English!';
+	}
+
+.. note:: This function is not typically very reliable since some
+	browsers do not provide language info, and even among those that do, it
+	is not always accurate.
+
+$this->agent->accept_charset()
+===============================
+
+Lets you determine if the user agent accepts a particular character set.
+Example::
+
+	if ($this->agent->accept_charset('utf-8'))
+	{
+	    echo 'You browser supports UTF-8!';
+	}
+
+.. note:: This function is not typically very reliable since some
+	browsers do not provide character-set info, and even among those that
+	do, it is not always accurate.
diff --git a/user_guide_src/source/libraries/xmlrpc.rst b/user_guide_src/source/libraries/xmlrpc.rst
new file mode 100644
index 000000000..3b945769f
--- /dev/null
+++ b/user_guide_src/source/libraries/xmlrpc.rst
@@ -0,0 +1,536 @@
+##################################
+XML-RPC and XML-RPC Server Classes
+##################################
+
+CodeIgniter's XML-RPC classes permit you to send requests to another
+server, or set up your own XML-RPC server to receive requests.
+
+****************
+What is XML-RPC?
+****************
+
+Quite simply it is a way for two computers to communicate over the
+internet using XML. One computer, which we will call the client, sends
+an XML-RPC **request** to another computer, which we will call the
+server. Once the server receives and processes the request it will send
+back a **response** to the client.
+
+For example, using the MetaWeblog API, an XML-RPC Client (usually a
+desktop publishing tool) will send a request to an XML-RPC Server
+running on your site. This request might be a new weblog entry being
+sent for publication, or it could be a request for an existing entry for
+editing. When the XML-RPC Server receives this request it will examine
+it to determine which class/method should be called to process the
+request. Once processed, the server will then send back a response
+message.
+
+For detailed specifications, you can visit the
+`XML-RPC <http://www.xmlrpc.com/>`_ site.
+
+Initializing the Class
+======================
+
+Like most other classes in CodeIgniter, the XML-RPC and XML-RPCS classes
+are initialized in your controller using the $this->load->library
+function:
+
+To load the XML-RPC class you will use::
+
+	$this->load->library('xmlrpc');
+
+Once loaded, the xml-rpc library object will be available using:
+$this->xmlrpc
+
+To load the XML-RPC Server class you will use::
+
+	$this->load->library('xmlrpc');
+	$this->load->library('xmlrpcs');
+
+Once loaded, the xml-rpcs library object will be available using:
+$this->xmlrpcs
+
+.. note:: When using the XML-RPC Server class you must load BOTH the
+	XML-RPC class and the XML-RPC Server class.
+
+Sending XML-RPC Requests
+========================
+
+To send a request to an XML-RPC server you must specify the following
+information:
+
+-  The URL of the server
+-  The method on the server you wish to call
+-  The *request* data (explained below).
+
+Here is a basic example that sends a simple Weblogs.com ping to the
+`Ping-o-Matic <http://pingomatic.com/>`_
+
+::
+
+	$this->load->library('xmlrpc');
+
+	$this->xmlrpc->server('http://rpc.pingomatic.com/', 80);
+	$this->xmlrpc->method('weblogUpdates.ping');
+
+	$request = array('My Photoblog', 'http://www.my-site.com/photoblog/');
+	$this->xmlrpc->request($request);
+
+	if ( ! $this->xmlrpc->send_request())
+	{
+	    echo $this->xmlrpc->display_error();
+	}
+
+Explanation
+-----------
+
+The above code initializes the XML-RPC class, sets the server URL and
+method to be called (weblogUpdates.ping). The request (in this case, the
+title and URL of your site) is placed into an array for transportation,
+and compiled using the request() function. Lastly, the full request is
+sent. If the send_request() method returns false we will display the
+error message sent back from the XML-RPC Server.
+
+Anatomy of a Request
+====================
+
+An XML-RPC request is simply the data you are sending to the XML-RPC
+server. Each piece of data in a request is referred to as a request
+parameter. The above example has two parameters: The URL and title of
+your site. When the XML-RPC server receives your request, it will look
+for parameters it requires.
+
+Request parameters must be placed into an array for transportation, and
+each parameter can be one of seven data types (strings, numbers, dates,
+etc.). If your parameters are something other than strings you will have
+to include the data type in the request array.
+
+Here is an example of a simple array with three parameters::
+
+	$request = array('John', 'Doe', 'www.some-site.com');
+	$this->xmlrpc->request($request);
+
+If you use data types other than strings, or if you have several
+different data types, you will place each parameter into its own array,
+with the data type in the second position::
+
+	$request = array (
+	                   array('John', 'string'),
+	                   array('Doe', 'string'),
+	                   array(FALSE, 'boolean'),
+	                   array(12345, 'int')
+	                 ); 
+	$this->xmlrpc->request($request);
+
+The `Data Types <#datatypes>`_ section below has a full list of data
+types.
+Creating an XML-RPC Server
+==========================
+
+An XML-RPC Server acts as a traffic cop of sorts, waiting for incoming
+requests and redirecting them to the appropriate functions for
+processing.
+
+To create your own XML-RPC server involves initializing the XML-RPC
+Server class in your controller where you expect the incoming request to
+appear, then setting up an array with mapping instructions so that
+incoming requests can be sent to the appropriate class and method for
+processing.
+
+Here is an example to illustrate::
+
+	$this->load->library('xmlrpc');
+	$this->load->library('xmlrpcs');
+
+	$config['functions']['new_post'] = array('function' => 'My_blog.new_entry'),
+	$config['functions']['update_post'] = array('function' => 'My_blog.update_entry');
+	$config['object'] = $this;
+
+	$this->xmlrpcs->initialize($config);
+	$this->xmlrpcs->serve();
+
+The above example contains an array specifying two method requests that
+the Server allows. The allowed methods are on the left side of the
+array. When either of those are received, they will be mapped to the
+class and method on the right.
+
+The 'object' key is a special key that you pass an instantiated class
+object with, which is necessary when the method you are mapping to is
+not part of the CodeIgniter super object.
+
+In other words, if an XML-RPC Client sends a request for the new_post
+method, your server will load the My_blog class and call the new_entry
+function. If the request is for the update_post method, your server
+will load the My_blog class and call the update_entry function.
+
+The function names in the above example are arbitrary. You'll decide
+what they should be called on your server, or if you are using
+standardized APIs, like the Blogger or MetaWeblog API, you'll use their
+function names.
+
+There are two additional configuration keys you may make use of when
+initializing the server class: debug can be set to TRUE in order to
+enable debugging, and xss_clean may be set to FALSE to prevent sending
+data through the Security library's xss_clean function.
+
+Processing Server Requests
+==========================
+
+When the XML-RPC Server receives a request and loads the class/method
+for processing, it will pass an object to that method containing the
+data sent by the client.
+
+Using the above example, if the new_post method is requested, the
+server will expect a class to exist with this prototype::
+
+	class My_blog extends CI_Controller {
+
+	    function new_post($request)
+	    {
+
+	    }
+	}
+
+The $request variable is an object compiled by the Server, which
+contains the data sent by the XML-RPC Client. Using this object you will
+have access to the *request parameters* enabling you to process the
+request. When you are done you will send a Response back to the Client.
+
+Below is a real-world example, using the Blogger API. One of the methods
+in the Blogger API is getUserInfo(). Using this method, an XML-RPC
+Client can send the Server a username and password, in return the Server
+sends back information about that particular user (nickname, user ID,
+email address, etc.). Here is how the processing function might look::
+
+	class My_blog extends CI_Controller {
+
+	    function getUserInfo($request)
+	    {
+	        $username = 'smitty';
+	        $password = 'secretsmittypass';
+
+	        $this->load->library('xmlrpc');
+
+	        $parameters = $request->output_parameters();
+
+	        if ($parameters['1'] != $username AND $parameters['2'] != $password)
+	        {
+	            return $this->xmlrpc->send_error_message('100', 'Invalid Access');
+	        }
+
+	        $response = array(array('nickname'  => array('Smitty','string'),
+	                                'userid'    => array('99','string'),
+	                                'url'       => array('http://yoursite.com','string'),
+	                                'email'     => array('jsmith@yoursite.com','string'),
+	                                'lastname'  => array('Smith','string'),
+	                                'firstname' => array('John','string')
+	                                ),
+	                         'struct');
+
+	        return $this->xmlrpc->send_response($response);
+	    }
+	}
+
+Notes:
+------
+
+The output_parameters() function retrieves an indexed array
+corresponding to the request parameters sent by the client. In the above
+example, the output parameters will be the username and password.
+
+If the username and password sent by the client were not valid, and
+error message is returned using send_error_message().
+
+If the operation was successful, the client will be sent back a response
+array containing the user's info.
+
+Formatting a Response
+=====================
+
+Similar to *Requests*, *Responses* must be formatted as an array.
+However, unlike requests, a response is an array **that contains a
+single item**. This item can be an array with several additional arrays,
+but there can be only one primary array index. In other words, the basic
+prototype is this::
+
+	$response = array('Response data',  'array');
+
+Responses, however, usually contain multiple pieces of information. In
+order to accomplish this we must put the response into its own array so
+that the primary array continues to contain a single piece of data.
+Here's an example showing how this might be accomplished::
+
+	$response = array (
+	                   array(
+	                         'first_name' => array('John', 'string'),
+	                         'last_name' => array('Doe', 'string'),
+	                         'member_id' => array(123435, 'int'),
+	                         'todo_list' => array(array('clean house', 'call mom', 'water plants'), 'array'),
+	                        ),
+	                 'struct'
+	                 );
+
+Notice that the above array is formatted as a struct. This is the most
+common data type for responses.
+
+As with Requests, a response can be one of the seven data types listed
+in the `Data Types <#datatypes>`_ section.
+
+Sending an Error Response
+=========================
+
+If you need to send the client an error response you will use the
+following::
+
+	return $this->xmlrpc->send_error_message('123', 'Requested data not available');
+
+The first parameter is the error number while the second parameter is
+the error message.
+
+Creating Your Own Client and Server
+===================================
+
+To help you understand everything we've covered thus far, let's create a
+couple controllers that act as XML-RPC Client and Server. You'll use the
+Client to send a request to the Server and receive a response.
+
+The Client
+----------
+
+Using a text editor, create a controller called xmlrpc_client.php. In
+it, place this code and save it to your applications/controllers/
+folder::
+
+	<?php
+
+	class Xmlrpc_client extends CI_Controller {
+
+		function index()
+		{
+			$this->load->helper('url');
+			$server_url = site_url('xmlrpc_server');
+
+			$this->load->library('xmlrpc');
+
+			$this->xmlrpc->server($server_url, 80);
+			$this->xmlrpc->method('Greetings');
+
+			$request = array('How is it going?');
+			$this->xmlrpc->request($request);
+
+			if ( ! $this->xmlrpc->send_request())
+			{
+				echo $this->xmlrpc->display_error();
+			}
+			else
+			{
+				echo '<pre>';
+				print_r($this->xmlrpc->display_response());
+				echo '</pre>';
+			}
+		}
+	}
+	?>
+
+.. note:: In the above code we are using a "url helper". You can find more
+	information in the :doc:`Helpers Functions <../general/helpers>` page.
+
+The Server
+----------
+
+Using a text editor, create a controller called xmlrpc_server.php. In
+it, place this code and save it to your applications/controllers/
+folder::
+
+	<?php
+
+	class Xmlrpc_server extends CI_Controller {
+
+		function index()
+		{
+			$this->load->library('xmlrpc');
+			$this->load->library('xmlrpcs');
+
+			$config['functions']['Greetings'] = array('function' => 'Xmlrpc_server.process');
+
+			$this->xmlrpcs->initialize($config);
+			$this->xmlrpcs->serve();
+		}
+
+
+		function process($request)
+		{
+			$parameters = $request->output_parameters();
+
+			$response = array(
+								array(
+										'you_said'  => $parameters['0'],
+										'i_respond' => 'Not bad at all.'),
+								'struct');
+
+			return $this->xmlrpc->send_response($response);
+		}
+	}
+	?>
+
+
+Try it!
+-------
+
+Now visit the your site using a URL similar to this::
+
+	example.com/index.php/xmlrpc_client/
+
+You should now see the message you sent to the server, and its response
+back to you.
+
+The client you created sends a message ("How's is going?") to the
+server, along with a request for the "Greetings" method. The Server
+receives the request and maps it to the "process" function, where a
+response is sent back.
+
+Using Associative Arrays In a Request Parameter
+===============================================
+
+If you wish to use an associative array in your method parameters you
+will need to use a struct datatype::
+
+	$request = array(
+	                 array(
+	                       // Param 0
+	                       array(
+	                             'name'=>'John'
+	                            	),
+	                             'struct'
+	                       ),
+	                       array(
+	                             // Param 1
+	                             array(
+	                                  	'size'=>'large',
+	                                   'shape'=>'round'
+	                                  	),
+	                             'struct'
+	                       )
+	                 );
+	$this->xmlrpc->request($request);
+
+You can retrieve the associative array when processing the request in
+the Server.
+
+::
+
+	$parameters = $request->output_parameters();
+	$name = $parameters['0']['name'];
+	$size = $parameters['1']['size'];
+	$size = $parameters['1']['shape'];
+
+**************************
+XML-RPC Function Reference
+**************************
+
+$this->xmlrpc->server()
+=======================
+
+Sets the URL and port number of the server to which a request is to be
+sent::
+
+	$this->xmlrpc->server('http://www.sometimes.com/pings.php', 80);
+
+$this->xmlrpc->timeout()
+========================
+
+Set a time out period (in seconds) after which the request will be
+canceled::
+
+	$this->xmlrpc->timeout(6);
+
+$this->xmlrpc->method()
+=======================
+
+Sets the method that will be requested from the XML-RPC server::
+
+	$this->xmlrpc->method('method');
+
+Where method is the name of the method.
+
+$this->xmlrpc->request()
+========================
+
+Takes an array of data and builds request to be sent to XML-RPC server::
+
+	$request = array(array('My Photoblog', 'string'), 'http://www.yoursite.com/photoblog/');
+	$this->xmlrpc->request($request);
+
+$this->xmlrpc->send_request()
+==============================
+
+The request sending function. Returns boolean TRUE or FALSE based on
+success for failure, enabling it to be used conditionally.
+
+$this->xmlrpc->set_debug(TRUE);
+================================
+
+Enables debugging, which will display a variety of information and error
+data helpful during development.
+
+$this->xmlrpc->display_error()
+===============================
+
+Returns an error message as a string if your request failed for some
+reason.
+
+::
+
+	echo $this->xmlrpc->display_error();
+
+$this->xmlrpc->display_response()
+==================================
+
+Returns the response from the remote server once request is received.
+The response will typically be an associative array.
+
+::
+
+	$this->xmlrpc->display_response();
+
+$this->xmlrpc->send_error_message()
+=====================================
+
+This function lets you send an error message from your server to the
+client. First parameter is the error number while the second parameter
+is the error message.
+
+::
+
+	return $this->xmlrpc->send_error_message('123', 'Requested data not available');
+
+$this->xmlrpc->send_response()
+===============================
+
+Lets you send the response from your server to the client. An array of
+valid data values must be sent with this method.
+
+::
+
+	$response = array(
+	                 array(
+	                        'flerror' => array(FALSE, 'boolean'),
+	                        'message' => "Thanks for the ping!"
+	                     )
+	                 'struct');
+	return $this->xmlrpc->send_response($response);
+
+Data Types
+==========
+
+According to the `XML-RPC spec <http://www.xmlrpc.com/spec>`_ there are
+seven types of values that you can send via XML-RPC:
+
+-  *int* or *i4*
+-  *boolean*
+-  *string*
+-  *double*
+-  *dateTime.iso8601*
+-  *base64*
+-  *struct* (contains array of values)
+-  *array* (contains array of values)
+
diff --git a/user_guide_src/source/libraries/zip.rst b/user_guide_src/source/libraries/zip.rst
new file mode 100644
index 000000000..c27718273
--- /dev/null
+++ b/user_guide_src/source/libraries/zip.rst
@@ -0,0 +1,208 @@
+##################
+Zip Encoding Class
+##################
+
+CodeIgniter's Zip Encoding Class classes permit you to create Zip
+archives. Archives can be downloaded to your desktop or saved to a
+directory.
+
+Initializing the Class
+======================
+
+Like most other classes in CodeIgniter, the Zip class is initialized in
+your controller using the $this->load->library function::
+
+	$this->load->library('zip');
+
+Once loaded, the Zip library object will be available using: $this->zip
+
+Usage Example
+=============
+
+This example demonstrates how to compress a file, save it to a folder on
+your server, and download it to your desktop.
+
+::
+
+	$name = 'mydata1.txt';
+	$data = 'A Data String!';
+
+	$this->zip->add_data($name, $data);
+
+	// Write the zip file to a folder on your server. Name it "my_backup.zip"
+	$this->zip->archive('/path/to/directory/my_backup.zip'); 
+
+	// Download the file to your desktop. Name it "my_backup.zip"
+	$this->zip->download('my_backup.zip');
+
+******************
+Function Reference
+******************
+
+$this->zip->add_data()
+=======================
+
+Permits you to add data to the Zip archive. The first parameter must
+contain the name you would like given to the file, the second parameter
+must contain the file data as a string::
+
+	$name = 'my_bio.txt';
+	$data = 'I was born in an elevator...';
+
+	$this->zip->add_data($name, $data);
+
+You are allowed multiple calls to this function in order to add several
+files to your archive. Example::
+
+	$name = 'mydata1.txt';
+	$data = 'A Data String!';
+	$this->zip->add_data($name, $data);
+
+	$name = 'mydata2.txt';
+	$data = 'Another Data String!';
+	$this->zip->add_data($name, $data);
+
+Or you can pass multiple files using an array::
+
+	$data = array(
+	                'mydata1.txt' => 'A Data String!',
+	                'mydata2.txt' => 'Another Data String!'
+	            );
+
+	$this->zip->add_data($data);
+
+	$this->zip->download('my_backup.zip');
+
+If you would like your compressed data organized into sub-folders,
+include the path as part of the filename::
+
+	$name = 'personal/my_bio.txt';
+	$data = 'I was born in an elevator...';
+
+	$this->zip->add_data($name, $data);
+
+The above example will place my_bio.txt inside a folder called
+personal.
+
+$this->zip->add_dir()
+======================
+
+Permits you to add a directory. Usually this function is unnecessary
+since you can place your data into folders when using
+$this->zip->add_data(), but if you would like to create an empty folder
+you can do so. Example::
+
+	$this->zip->add_dir('myfolder'); // Creates a folder called "myfolder"
+
+$this->zip->read_file()
+========================
+
+Permits you to compress a file that already exists somewhere on your
+server. Supply a file path and the zip class will read it and add it to
+the archive::
+
+	$path = '/path/to/photo.jpg';
+
+	$this->zip->read_file($path); 
+
+	// Download the file to your desktop. Name it "my_backup.zip"
+	$this->zip->download('my_backup.zip');
+
+If you would like the Zip archive to maintain the directory structure of
+the file in it, pass TRUE (boolean) in the second parameter. Example::
+
+	$path = '/path/to/photo.jpg';
+
+	$this->zip->read_file($path, TRUE); 
+
+	// Download the file to your desktop. Name it "my_backup.zip"
+	$this->zip->download('my_backup.zip');
+
+In the above example, photo.jpg will be placed inside two folders:
+path/to/
+
+$this->zip->read_dir()
+=======================
+
+Permits you to compress a folder (and its contents) that already exists
+somewhere on your server. Supply a file path to the directory and the
+zip class will recursively read it and recreate it as a Zip archive. All
+files contained within the supplied path will be encoded, as will any
+sub-folders contained within it. Example::
+
+	$path = '/path/to/your/directory/';
+
+	$this->zip->read_dir($path); 
+
+	// Download the file to your desktop. Name it "my_backup.zip"
+	$this->zip->download('my_backup.zip');
+
+By default the Zip archive will place all directories listed in the
+first parameter inside the zip. If you want the tree preceding the
+target folder to be ignored you can pass FALSE (boolean) in the second
+parameter. Example::
+
+	$path = '/path/to/your/directory/';
+
+	$this->zip->read_dir($path, FALSE);
+
+This will create a ZIP with the folder "directory" inside, then all
+sub-folders stored correctly inside that, but will not include the
+folders /path/to/your.
+
+$this->zip->archive()
+=====================
+
+Writes the Zip-encoded file to a directory on your server. Submit a
+valid server path ending in the file name. Make sure the directory is
+writable (666 or 777 is usually OK). Example::
+
+	$this->zip->archive('/path/to/folder/myarchive.zip'); // Creates a file named myarchive.zip
+
+$this->zip->download()
+======================
+
+Causes the Zip file to be downloaded from your server. The function must
+be passed the name you would like the zip file called. Example::
+
+	$this->zip->download('latest_stuff.zip'); // File will be named "latest_stuff.zip"
+
+.. note:: Do not display any data in the controller in which you call
+	this function since it sends various server headers that cause the
+	download to happen and the file to be treated as binary.
+
+$this->zip->get_zip()
+======================
+
+Returns the Zip-compressed file data. Generally you will not need this
+function unless you want to do something unique with the data. Example::
+
+	$name = 'my_bio.txt';
+	$data = 'I was born in an elevator...';
+
+	$this->zip->add_data($name, $data);
+
+	$zip_file = $this->zip->get_zip();
+
+$this->zip->clear_data()
+=========================
+
+The Zip class caches your zip data so that it doesn't need to recompile
+the Zip archive for each function you use above. If, however, you need
+to create multiple Zips, each with different data, you can clear the
+cache between calls. Example::
+
+	$name = 'my_bio.txt';
+	$data = 'I was born in an elevator...';
+
+	$this->zip->add_data($name, $data);
+	$zip_file = $this->zip->get_zip();
+
+	$this->zip->clear_data(); 
+
+	$name = 'photo.jpg';
+	$this->zip->read_file("/path/to/photo.jpg"); // Read the file's contents
+
+
+	$this->zip->download('myphotos.zip');
+