From 4d57caedaa53da50eb55e574762cb82502b5fc02 Mon Sep 17 00:00:00 2001 From: Florian Pritz Date: Sun, 12 Sep 2010 02:04:21 +0200 Subject: switch to geshi for highlighting Signed-off-by: Florian Pritz --- system/application/libraries/geshi.php | 4685 ++++++++++++++++++++++++++++++++ 1 file changed, 4685 insertions(+) create mode 100644 system/application/libraries/geshi.php (limited to 'system/application/libraries/geshi.php') diff --git a/system/application/libraries/geshi.php b/system/application/libraries/geshi.php new file mode 100644 index 000000000..f6796c9f6 --- /dev/null +++ b/system/application/libraries/geshi.php @@ -0,0 +1,4685 @@ +, Benny Baumann + * @copyright (C) 2004 - 2007 Nigel McNie, (C) 2007 - 2008 Benny Baumann + * @license http://gnu.org/copyleft/gpl.html GNU GPL + * + */ + +// +// GeSHi Constants +// You should use these constant names in your programs instead of +// their values - you never know when a value may change in a future +// version +// + +/** The version of this GeSHi file */ +define('GESHI_VERSION', '1.0.8.6'); + +// Define the root directory for the GeSHi code tree +if (!defined('GESHI_ROOT')) { + /** The root directory for GeSHi */ + define('GESHI_ROOT', dirname(__FILE__) . DIRECTORY_SEPARATOR); +} +/** The language file directory for GeSHi + @access private */ +define('GESHI_LANG_ROOT', GESHI_ROOT . 'geshi' . DIRECTORY_SEPARATOR); + +// Define if GeSHi should be paranoid about security +if (!defined('GESHI_SECURITY_PARANOID')) { + /** Tells GeSHi to be paranoid about security settings */ + define('GESHI_SECURITY_PARANOID', false); +} + +// Line numbers - use with enable_line_numbers() +/** Use no line numbers when building the result */ +define('GESHI_NO_LINE_NUMBERS', 0); +/** Use normal line numbers when building the result */ +define('GESHI_NORMAL_LINE_NUMBERS', 1); +/** Use fancy line numbers when building the result */ +define('GESHI_FANCY_LINE_NUMBERS', 2); + +// Container HTML type +/** Use nothing to surround the source */ +define('GESHI_HEADER_NONE', 0); +/** Use a "div" to surround the source */ +define('GESHI_HEADER_DIV', 1); +/** Use a "pre" to surround the source */ +define('GESHI_HEADER_PRE', 2); +/** Use a pre to wrap lines when line numbers are enabled or to wrap the whole code. */ +define('GESHI_HEADER_PRE_VALID', 3); +/** + * Use a "table" to surround the source: + * + * + * + * + * + *
$header
$linenumbers
$code>
$footer
+ * + * this is essentially only a workaround for Firefox, see sf#1651996 or take a look at + * https://bugzilla.mozilla.org/show_bug.cgi?id=365805 + * @note when linenumbers are disabled this is essentially the same as GESHI_HEADER_PRE + */ +define('GESHI_HEADER_PRE_TABLE', 4); + +// Capatalisation constants +/** Lowercase keywords found */ +define('GESHI_CAPS_NO_CHANGE', 0); +/** Uppercase keywords found */ +define('GESHI_CAPS_UPPER', 1); +/** Leave keywords found as the case that they are */ +define('GESHI_CAPS_LOWER', 2); + +// Link style constants +/** Links in the source in the :link state */ +define('GESHI_LINK', 0); +/** Links in the source in the :hover state */ +define('GESHI_HOVER', 1); +/** Links in the source in the :active state */ +define('GESHI_ACTIVE', 2); +/** Links in the source in the :visited state */ +define('GESHI_VISITED', 3); + +// Important string starter/finisher +// Note that if you change these, they should be as-is: i.e., don't +// write them as if they had been run through htmlentities() +/** The starter for important parts of the source */ +define('GESHI_START_IMPORTANT', ''); +/** The ender for important parts of the source */ +define('GESHI_END_IMPORTANT', ''); + +/**#@+ + * @access private + */ +// When strict mode applies for a language +/** Strict mode never applies (this is the most common) */ +define('GESHI_NEVER', 0); +/** Strict mode *might* apply, and can be enabled or + disabled by {@link GeSHi->enable_strict_mode()} */ +define('GESHI_MAYBE', 1); +/** Strict mode always applies */ +define('GESHI_ALWAYS', 2); + +// Advanced regexp handling constants, used in language files +/** The key of the regex array defining what to search for */ +define('GESHI_SEARCH', 0); +/** The key of the regex array defining what bracket group in a + matched search to use as a replacement */ +define('GESHI_REPLACE', 1); +/** The key of the regex array defining any modifiers to the regular expression */ +define('GESHI_MODIFIERS', 2); +/** The key of the regex array defining what bracket group in a + matched search to put before the replacement */ +define('GESHI_BEFORE', 3); +/** The key of the regex array defining what bracket group in a + matched search to put after the replacement */ +define('GESHI_AFTER', 4); +/** The key of the regex array defining a custom keyword to use + for this regexp's html tag class */ +define('GESHI_CLASS', 5); + +/** Used in language files to mark comments */ +define('GESHI_COMMENTS', 0); + +/** Used to work around missing PHP features **/ +define('GESHI_PHP_PRE_433', !(version_compare(PHP_VERSION, '4.3.3') === 1)); + +/** make sure we can call stripos **/ +if (!function_exists('stripos')) { + // the offset param of preg_match is not supported below PHP 4.3.3 + if (GESHI_PHP_PRE_433) { + /** + * @ignore + */ + function stripos($haystack, $needle, $offset = null) { + if (!is_null($offset)) { + $haystack = substr($haystack, $offset); + } + if (preg_match('/'. preg_quote($needle, '/') . '/', $haystack, $match, PREG_OFFSET_CAPTURE)) { + return $match[0][1]; + } + return false; + } + } + else { + /** + * @ignore + */ + function stripos($haystack, $needle, $offset = null) { + if (preg_match('/'. preg_quote($needle, '/') . '/', $haystack, $match, PREG_OFFSET_CAPTURE, $offset)) { + return $match[0][1]; + } + return false; + } + } +} + +/** some old PHP / PCRE subpatterns only support up to xxx subpatterns in + regular expressions. Set this to false if your PCRE lib is up to date + @see GeSHi->optimize_regexp_list() + **/ +define('GESHI_MAX_PCRE_SUBPATTERNS', 500); +/** it's also important not to generate too long regular expressions + be generous here... but keep in mind, that when reaching this limit we + still have to close open patterns. 12k should do just fine on a 16k limit. + @see GeSHi->optimize_regexp_list() + **/ +define('GESHI_MAX_PCRE_LENGTH', 12288); + +//Number format specification +/** Basic number format for integers */ +define('GESHI_NUMBER_INT_BASIC', 1); //Default integers \d+ +/** Enhanced number format for integers like seen in C */ +define('GESHI_NUMBER_INT_CSTYLE', 2); //Default C-Style \d+[lL]? +/** Number format to highlight binary numbers with a suffix "b" */ +define('GESHI_NUMBER_BIN_SUFFIX', 16); //[01]+[bB] +/** Number format to highlight binary numbers with a prefix % */ +define('GESHI_NUMBER_BIN_PREFIX_PERCENT', 32); //%[01]+ +/** Number format to highlight binary numbers with a prefix 0b (C) */ +define('GESHI_NUMBER_BIN_PREFIX_0B', 64); //0b[01]+ +/** Number format to highlight octal numbers with a leading zero */ +define('GESHI_NUMBER_OCT_PREFIX', 256); //0[0-7]+ +/** Number format to highlight octal numbers with a prefix 0o (logtalk) */ +define('GESHI_NUMBER_OCT_PREFIX_0O', 512); //0[0-7]+ +/** Number format to highlight octal numbers with a suffix of o */ +define('GESHI_NUMBER_OCT_SUFFIX', 1024); //[0-7]+[oO] +/** Number format to highlight hex numbers with a prefix 0x */ +define('GESHI_NUMBER_HEX_PREFIX', 4096); //0x[0-9a-fA-F]+ +/** Number format to highlight hex numbers with a suffix of h */ +define('GESHI_NUMBER_HEX_SUFFIX', 8192); //[0-9][0-9a-fA-F]*h +/** Number format to highlight floating-point numbers without support for scientific notation */ +define('GESHI_NUMBER_FLT_NONSCI', 65536); //\d+\.\d+ +/** Number format to highlight floating-point numbers without support for scientific notation */ +define('GESHI_NUMBER_FLT_NONSCI_F', 131072); //\d+(\.\d+)?f +/** Number format to highlight floating-point numbers with support for scientific notation (E) and optional leading zero */ +define('GESHI_NUMBER_FLT_SCI_SHORT', 262144); //\.\d+e\d+ +/** Number format to highlight floating-point numbers with support for scientific notation (E) and required leading digit */ +define('GESHI_NUMBER_FLT_SCI_ZERO', 524288); //\d+(\.\d+)?e\d+ +//Custom formats are passed by RX array + +// Error detection - use these to analyse faults +/** No sourcecode to highlight was specified + * @deprecated + */ +define('GESHI_ERROR_NO_INPUT', 1); +/** The language specified does not exist */ +define('GESHI_ERROR_NO_SUCH_LANG', 2); +/** GeSHi could not open a file for reading (generally a language file) */ +define('GESHI_ERROR_FILE_NOT_READABLE', 3); +/** The header type passed to {@link GeSHi->set_header_type()} was invalid */ +define('GESHI_ERROR_INVALID_HEADER_TYPE', 4); +/** The line number type passed to {@link GeSHi->enable_line_numbers()} was invalid */ +define('GESHI_ERROR_INVALID_LINE_NUMBER_TYPE', 5); +/**#@-*/ + + +/** + * The GeSHi Class. + * + * Please refer to the documentation for GeSHi 1.0.X that is available + * at http://qbnz.com/highlighter/documentation.php for more information + * about how to use this class. + * + * @package geshi + * @author Nigel McNie , Benny Baumann + * @copyright (C) 2004 - 2007 Nigel McNie, (C) 2007 - 2008 Benny Baumann + */ +class Geshi { + /**#@+ + * @access private + */ + /** + * The source code to highlight + * @var string + */ + var $source = ''; + + /** + * The language to use when highlighting + * @var string + */ + var $language = ''; + + /** + * The data for the language used + * @var array + */ + var $language_data = array(); + + /** + * The path to the language files + * @var string + */ + var $language_path = GESHI_LANG_ROOT; + + /** + * The error message associated with an error + * @var string + * @todo check err reporting works + */ + var $error = false; + + /** + * Possible error messages + * @var array + */ + var $error_messages = array( + GESHI_ERROR_NO_SUCH_LANG => 'GeSHi could not find the language {LANGUAGE} (using path {PATH})', + GESHI_ERROR_FILE_NOT_READABLE => 'The file specified for load_from_file was not readable', + GESHI_ERROR_INVALID_HEADER_TYPE => 'The header type specified is invalid', + GESHI_ERROR_INVALID_LINE_NUMBER_TYPE => 'The line number type specified is invalid' + ); + + /** + * Whether highlighting is strict or not + * @var boolean + */ + var $strict_mode = false; + + /** + * Whether to use CSS classes in output + * @var boolean + */ + var $use_classes = false; + + /** + * The type of header to use. Can be one of the following + * values: + * + * - GESHI_HEADER_PRE: Source is outputted in a "pre" HTML element. + * - GESHI_HEADER_DIV: Source is outputted in a "div" HTML element. + * - GESHI_HEADER_NONE: No header is outputted. + * + * @var int + */ + var $header_type = GESHI_HEADER_PRE; + + /** + * Array of permissions for which lexics should be highlighted + * @var array + */ + var $lexic_permissions = array( + 'KEYWORDS' => array(), + 'COMMENTS' => array('MULTI' => true), + 'REGEXPS' => array(), + 'ESCAPE_CHAR' => true, + 'BRACKETS' => true, + 'SYMBOLS' => false, + 'STRINGS' => true, + 'NUMBERS' => true, + 'METHODS' => true, + 'SCRIPT' => true + ); + + /** + * The time it took to parse the code + * @var double + */ + var $time = 0; + + /** + * The content of the header block + * @var string + */ + var $header_content = ''; + + /** + * The content of the footer block + * @var string + */ + var $footer_content = ''; + + /** + * The style of the header block + * @var string + */ + var $header_content_style = ''; + + /** + * The style of the footer block + * @var string + */ + var $footer_content_style = ''; + + /** + * Tells if a block around the highlighted source should be forced + * if not using line numbering + * @var boolean + */ + var $force_code_block = false; + + /** + * The styles for hyperlinks in the code + * @var array + */ + var $link_styles = array(); + + /** + * Whether important blocks should be recognised or not + * @var boolean + * @deprecated + * @todo REMOVE THIS FUNCTIONALITY! + */ + var $enable_important_blocks = false; + + /** + * Styles for important parts of the code + * @var string + * @deprecated + * @todo As above - rethink the whole idea of important blocks as it is buggy and + * will be hard to implement in 1.2 + */ + var $important_styles = 'font-weight: bold; color: red;'; // Styles for important parts of the code + + /** + * Whether CSS IDs should be added to the code + * @var boolean + */ + var $add_ids = false; + + /** + * Lines that should be highlighted extra + * @var array + */ + var $highlight_extra_lines = array(); + + /** + * Styles of lines that should be highlighted extra + * @var array + */ + var $highlight_extra_lines_styles = array(); + + /** + * Styles of extra-highlighted lines + * @var string + */ + var $highlight_extra_lines_style = 'background-color: #ffc;'; + + /** + * The line ending + * If null, nl2br() will be used on the result string. + * Otherwise, all instances of \n will be replaced with $line_ending + * @var string + */ + var $line_ending = null; + + /** + * Number at which line numbers should start at + * @var int + */ + var $line_numbers_start = 1; + + /** + * The overall style for this code block + * @var string + */ + var $overall_style = 'font-family:monospace;'; + + /** + * The style for the actual code + * @var string + */ + var $code_style = 'font: normal normal 1em/1.2em monospace; margin:0; padding:0; background:none; vertical-align:top;'; + + /** + * The overall class for this code block + * @var string + */ + var $overall_class = ''; + + /** + * The overall ID for this code block + * @var string + */ + var $overall_id = ''; + + /** + * Line number styles + * @var string + */ + var $line_style1 = 'font-weight: normal; vertical-align:top;'; + + /** + * Line number styles for fancy lines + * @var string + */ + var $line_style2 = 'font-weight: bold; vertical-align:top;'; + + /** + * Style for line numbers when GESHI_HEADER_PRE_TABLE is chosen + * @var string + */ + var $table_linenumber_style = 'width:1px;text-align:right;margin:0;padding:0 2px;vertical-align:top;'; + + /** + * Flag for how line numbers are displayed + * @var boolean + */ + var $line_numbers = GESHI_NO_LINE_NUMBERS; + + /** + * Flag to decide if multi line spans are allowed. Set it to false to make sure + * each tag is closed before and reopened after each linefeed. + * @var boolean + */ + var $allow_multiline_span = true; + + /** + * The "nth" value for fancy line highlighting + * @var int + */ + var $line_nth_row = 0; + + /** + * The size of tab stops + * @var int + */ + var $tab_width = 8; + + /** + * Should we use language-defined tab stop widths? + * @var int + */ + var $use_language_tab_width = false; + + /** + * Default target for keyword links + * @var string + */ + var $link_target = ''; + + /** + * The encoding to use for entity encoding + * NOTE: Used with Escape Char Sequences to fix UTF-8 handling (cf. SF#2037598) + * @var string + */ + var $encoding = 'utf-8'; + + /** + * Should keywords be linked? + * @var boolean + */ + var $keyword_links = true; + + /** + * Currently loaded language file + * @var string + * @since 1.0.7.22 + */ + var $loaded_language = ''; + + /** + * Wether the caches needed for parsing are built or not + * + * @var bool + * @since 1.0.8 + */ + var $parse_cache_built = false; + + /** + * Work around for Suhosin Patch with disabled /e modifier + * + * Note from suhosins author in config file: + *
+ * The /e modifier inside preg_replace() allows code execution. + * Often it is the cause for remote code execution exploits. It is wise to + * deactivate this feature and test where in the application it is used. + * The developer using the /e modifier should be made aware that he should + * use preg_replace_callback() instead + *
+ * + * @var array + * @since 1.0.8 + */ + var $_kw_replace_group = 0; + var $_rx_key = 0; + + /** + * some "callback parameters" for handle_multiline_regexps + * + * @since 1.0.8 + * @access private + * @var string + */ + var $_hmr_before = ''; + var $_hmr_replace = ''; + var $_hmr_after = ''; + var $_hmr_key = 0; + + /**#@-*/ + + /** + * Creates a new GeSHi object, with source and language + * + * @param string The source code to highlight + * @param string The language to highlight the source with + * @param string The path to the language file directory. This + * is deprecated! I've backported the auto path + * detection from the 1.1.X dev branch, so now it + * should be automatically set correctly. If you have + * renamed the language directory however, you will + * still need to set the path using this parameter or + * {@link GeSHi->set_language_path()} + * @since 1.0.0 + */ + function GeSHi($source = '', $language = '', $path = '') { + if (!empty($source)) { + $this->set_source($source); + } + if (!empty($language)) { + $this->set_language($language); + } + $this->set_language_path($path); + } + + /** + * Setter function to initialize vars from within CI + * @param array $config to set + * @return bool + */ + function initialize($config){ + + if(is_array($config)){ + + foreach($config as $key=>$value){ + if(method_exists('Geshi',$key)){ + $this->$key($value); + }else{ + $this->$key = $value; + } + } + return TRUE; + } + return FALSE; + } + + /** + * Returns an error message associated with the last GeSHi operation, + * or false if no error has occured + * + * @return string|false An error message if there has been an error, else false + * @since 1.0.0 + */ + function error() { + if ($this->error) { + //Put some template variables for debugging here ... + $debug_tpl_vars = array( + '{LANGUAGE}' => $this->language, + '{PATH}' => $this->language_path + ); + $msg = str_replace( + array_keys($debug_tpl_vars), + array_values($debug_tpl_vars), + $this->error_messages[$this->error]); + + return "
GeSHi Error: $msg (code {$this->error})
"; + } + return false; + } + + /** + * Gets a human-readable language name (thanks to Simon Patterson + * for the idea :)) + * + * @return string The name for the current language + * @since 1.0.2 + */ + function get_language_name() { + if (GESHI_ERROR_NO_SUCH_LANG == $this->error) { + return $this->language_data['LANG_NAME'] . ' (Unknown Language)'; + } + return $this->language_data['LANG_NAME']; + } + + /** + * Sets the source code for this object + * + * @param string The source code to highlight + * @since 1.0.0 + */ + function set_source($source) { + $this->source = $source; + $this->highlight_extra_lines = array(); + } + + /** + * Sets the language for this object + * + * @note since 1.0.8 this function won't reset language-settings by default anymore! + * if you need this set $force_reset = true + * + * @param string The name of the language to use + * @since 1.0.0 + */ + function set_language($language, $force_reset = false) { + if ($force_reset) { + $this->loaded_language = false; + } + + //Clean up the language name to prevent malicious code injection + $language = preg_replace('#[^a-zA-Z0-9\-_]#', '', $language); + + $language = strtolower($language); + + //Retreive the full filename + $file_name = $this->language_path . $language . '.php'; + if ($file_name == $this->loaded_language) { + // this language is already loaded! + return; + } + + $this->language = $language; + + $this->error = false; + $this->strict_mode = GESHI_NEVER; + + //Check if we can read the desired file + if (!is_readable($file_name)) { + $this->error = GESHI_ERROR_NO_SUCH_LANG; + return; + } + + // Load the language for parsing + $this->load_language($file_name); + } + + /** + * Sets the path to the directory containing the language files. Note + * that this path is relative to the directory of the script that included + * geshi.php, NOT geshi.php itself. + * + * @param string The path to the language directory + * @since 1.0.0 + * @deprecated The path to the language files should now be automatically + * detected, so this method should no longer be needed. The + * 1.1.X branch handles manual setting of the path differently + * so this method will disappear in 1.2.0. + */ + function set_language_path($path) { + if(strpos($path,':')) { + //Security Fix to prevent external directories using fopen wrappers. + if(DIRECTORY_SEPARATOR == "\\") { + if(!preg_match('#^[a-zA-Z]:#', $path) || false !== strpos($path, ':', 2)) { + return; + } + } else { + return; + } + } + if(preg_match('#[^/a-zA-Z0-9_\.\-\\\s:]#', $path)) { + //Security Fix to prevent external directories using fopen wrappers. + return; + } + if(GESHI_SECURITY_PARANOID && false !== strpos($path, '/.')) { + //Security Fix to prevent external directories using fopen wrappers. + return; + } + if(GESHI_SECURITY_PARANOID && false !== strpos($path, '..')) { + //Security Fix to prevent external directories using fopen wrappers. + return; + } + if ($path) { + $this->language_path = ('/' == $path[strlen($path) - 1]) ? $path : $path . '/'; + $this->set_language($this->language); // otherwise set_language_path has no effect + } + } + + /** + * Sets the type of header to be used. + * + * If GESHI_HEADER_DIV is used, the code is surrounded in a "div".This + * means more source code but more control over tab width and line-wrapping. + * GESHI_HEADER_PRE means that a "pre" is used - less source, but less + * control. Default is GESHI_HEADER_PRE. + * + * From 1.0.7.2, you can use GESHI_HEADER_NONE to specify that no header code + * should be outputted. + * + * @param int The type of header to be used + * @since 1.0.0 + */ + function set_header_type($type) { + //Check if we got a valid header type + if (!in_array($type, array(GESHI_HEADER_NONE, GESHI_HEADER_DIV, + GESHI_HEADER_PRE, GESHI_HEADER_PRE_VALID, GESHI_HEADER_PRE_TABLE))) { + $this->error = GESHI_ERROR_INVALID_HEADER_TYPE; + return; + } + + //Set that new header type + $this->header_type = $type; + } + + /** + * Sets the styles for the code that will be outputted + * when this object is parsed. The style should be a + * string of valid stylesheet declarations + * + * @param string The overall style for the outputted code block + * @param boolean Whether to merge the styles with the current styles or not + * @since 1.0.0 + */ + function set_overall_style($style, $preserve_defaults = false) { + if (!$preserve_defaults) { + $this->overall_style = $style; + } else { + $this->overall_style .= $style; + } + } + + /** + * Sets the overall classname for this block of code. This + * class can then be used in a stylesheet to style this object's + * output + * + * @param string The class name to use for this block of code + * @since 1.0.0 + */ + function set_overall_class($class) { + $this->overall_class = $class; + } + + /** + * Sets the overall id for this block of code. This id can then + * be used in a stylesheet to style this object's output + * + * @param string The ID to use for this block of code + * @since 1.0.0 + */ + function set_overall_id($id) { + $this->overall_id = $id; + } + + /** + * Sets whether CSS classes should be used to highlight the source. Default + * is off, calling this method with no arguments will turn it on + * + * @param boolean Whether to turn classes on or not + * @since 1.0.0 + */ + function enable_classes($flag = true) { + $this->use_classes = ($flag) ? true : false; + } + + /** + * Sets the style for the actual code. This should be a string + * containing valid stylesheet declarations. If $preserve_defaults is + * true, then styles are merged with the default styles, with the + * user defined styles having priority + * + * Note: Use this method to override any style changes you made to + * the line numbers if you are using line numbers, else the line of + * code will have the same style as the line number! Consult the + * GeSHi documentation for more information about this. + * + * @param string The style to use for actual code + * @param boolean Whether to merge the current styles with the new styles + * @since 1.0.2 + */ + function set_code_style($style, $preserve_defaults = false) { + if (!$preserve_defaults) { + $this->code_style = $style; + } else { + $this->code_style .= $style; + } + } + + /** + * Sets the styles for the line numbers. + * + * @param string The style for the line numbers that are "normal" + * @param string|boolean If a string, this is the style of the line + * numbers that are "fancy", otherwise if boolean then this + * defines whether the normal styles should be merged with the + * new normal styles or not + * @param boolean If set, is the flag for whether to merge the "fancy" + * styles with the current styles or not + * @since 1.0.2 + */ + function set_line_style($style1, $style2 = '', $preserve_defaults = false) { + //Check if we got 2 or three parameters + if (is_bool($style2)) { + $preserve_defaults = $style2; + $style2 = ''; + } + + //Actually set the new styles + if (!$preserve_defaults) { + $this->line_style1 = $style1; + $this->line_style2 = $style2; + } else { + $this->line_style1 .= $style1; + $this->line_style2 .= $style2; + } + } + + /** + * Sets whether line numbers should be displayed. + * + * Valid values for the first parameter are: + * + * - GESHI_NO_LINE_NUMBERS: Line numbers will not be displayed + * - GESHI_NORMAL_LINE_NUMBERS: Line numbers will be displayed + * - GESHI_FANCY_LINE_NUMBERS: Fancy line numbers will be displayed + * + * For fancy line numbers, the second parameter is used to signal which lines + * are to be fancy. For example, if the value of this parameter is 5 then every + * 5th line will be fancy. + * + * @param int How line numbers should be displayed + * @param int Defines which lines are fancy + * @since 1.0.0 + */ + function enable_line_numbers($flag, $nth_row = 5) { + if (GESHI_NO_LINE_NUMBERS != $flag && GESHI_NORMAL_LINE_NUMBERS != $flag + && GESHI_FANCY_LINE_NUMBERS != $flag) { + $this->error = GESHI_ERROR_INVALID_LINE_NUMBER_TYPE; + } + $this->line_numbers = $flag; + $this->line_nth_row = $nth_row; + } + + /** + * Sets wether spans and other HTML markup generated by GeSHi can + * span over multiple lines or not. Defaults to true to reduce overhead. + * Set it to false if you want to manipulate the output or manually display + * the code in an ordered list. + * + * @param boolean Wether multiline spans are allowed or not + * @since 1.0.7.22 + */ + function enable_multiline_span($flag) { + $this->allow_multiline_span = (bool) $flag; + } + + /** + * Get current setting for multiline spans, see GeSHi->enable_multiline_span(). + * + * @see enable_multiline_span + * @return bool + */ + function get_multiline_span() { + return $this->allow_multiline_span; + } + + /** + * Sets the style for a keyword group. If $preserve_defaults is + * true, then styles are merged with the default styles, with the + * user defined styles having priority + * + * @param int The key of the keyword group to change the styles of + * @param string The style to make the keywords + * @param boolean Whether to merge the new styles with the old or just + * to overwrite them + * @since 1.0.0 + */ + function set_keyword_group_style($key, $style, $preserve_defaults = false) { + //Set the style for this keyword group + if (!$preserve_defaults) { + $this->language_data['STYLES']['KEYWORDS'][$key] = $style; + } else { + $this->language_data['STYLES']['KEYWORDS'][$key] .= $style; + } + + //Update the lexic permissions + if (!isset($this->lexic_permissions['KEYWORDS'][$key])) { + $this->lexic_permissions['KEYWORDS'][$key] = true; + } + } + + /** + * Turns highlighting on/off for a keyword group + * + * @param int The key of the keyword group to turn on or off + * @param boolean Whether to turn highlighting for that group on or off + * @since 1.0.0 + */ + function set_keyword_group_highlighting($key, $flag = true) { + $this->lexic_permissions['KEYWORDS'][$key] = ($flag) ? true : false; + } + + /** + * Sets the styles for comment groups. If $preserve_defaults is + * true, then styles are merged with the default styles, with the + * user defined styles having priority + * + * @param int The key of the comment group to change the styles of + * @param string The style to make the comments + * @param boolean Whether to merge the new styles with the old or just + * to overwrite them + * @since 1.0.0 + */ + function set_comments_style($key, $style, $preserve_defaults = false) { + if (!$preserve_defaults) { + $this->language_data['STYLES']['COMMENTS'][$key] = $style; + } else { + $this->language_data['STYLES']['COMMENTS'][$key] .= $style; + } + } + + /** + * Turns highlighting on/off for comment groups + * + * @param int The key of the comment group to turn on or off + * @param boolean Whether to turn highlighting for that group on or off + * @since 1.0.0 + */ + function set_comments_highlighting($key, $flag = true) { + $this->lexic_permissions['COMMENTS'][$key] = ($flag) ? true : false; + } + + /** + * Sets the styles for escaped characters. If $preserve_defaults is + * true, then styles are merged with the default styles, with the + * user defined styles having priority + * + * @param string The style to make the escape characters + * @param boolean Whether to merge the new styles with the old or just + * to overwrite them + * @since 1.0.0 + */ + function set_escape_characters_style($style, $preserve_defaults = false, $group = 0) { + if (!$preserve_defaults) { + $this->language_data['STYLES']['ESCAPE_CHAR'][$group] = $style; + } else { + $this->language_data['STYLES']['ESCAPE_CHAR'][$group] .= $style; + } + } + + /** + * Turns highlighting on/off for escaped characters + * + * @param boolean Whether to turn highlighting for escape characters on or off + * @since 1.0.0 + */ + function set_escape_characters_highlighting($flag = true) { + $this->lexic_permissions['ESCAPE_CHAR'] = ($flag) ? true : false; + } + + /** + * Sets the styles for brackets. If $preserve_defaults is + * true, then styles are merged with the default styles, with the + * user defined styles having priority + * + * This method is DEPRECATED: use set_symbols_style instead. + * This method will be removed in 1.2.X + * + * @param string The style to make the brackets + * @param boolean Whether to merge the new styles with the old or just + * to overwrite them + * @since 1.0.0 + * @deprecated In favour of set_symbols_style + */ + function set_brackets_style($style, $preserve_defaults = false) { + if (!$preserve_defaults) { + $this->language_data['STYLES']['BRACKETS'][0] = $style; + } else { + $this->language_data['STYLES']['BRACKETS'][0] .= $style; + } + } + + /** + * Turns highlighting on/off for brackets + * + * This method is DEPRECATED: use set_symbols_highlighting instead. + * This method will be remove in 1.2.X + * + * @param boolean Whether to turn highlighting for brackets on or off + * @since 1.0.0 + * @deprecated In favour of set_symbols_highlighting + */ + function set_brackets_highlighting($flag) { + $this->lexic_permissions['BRACKETS'] = ($flag) ? true : false; + } + + /** + * Sets the styles for symbols. If $preserve_defaults is + * true, then styles are merged with the default styles, with the + * user defined styles having priority + * + * @param string The style to make the symbols + * @param boolean Whether to merge the new styles with the old or just + * to overwrite them + * @param int Tells the group of symbols for which style should be set. + * @since 1.0.1 + */ + function set_symbols_style($style, $preserve_defaults = false, $group = 0) { + // Update the style of symbols + if (!$preserve_defaults) { + $this->language_data['STYLES']['SYMBOLS'][$group] = $style; + } else { + $this->language_data['STYLES']['SYMBOLS'][$group] .= $style; + } + + // For backward compatibility + if (0 == $group) { + $this->set_brackets_style ($style, $preserve_defaults); + } + } + + /** + * Turns highlighting on/off for symbols + * + * @param boolean Whether to turn highlighting for symbols on or off + * @since 1.0.0 + */ + function set_symbols_highlighting($flag) { + // Update lexic permissions for this symbol group + $this->lexic_permissions['SYMBOLS'] = ($flag) ? true : false; + + // For backward compatibility + $this->set_brackets_highlighting ($flag); + } + + /** + * Sets the styles for strings. If $preserve_defaults is + * true, then styles are merged with the default styles, with the + * user defined styles having priority + * + * @param string The style to make the escape characters + * @param boolean Whether to merge the new styles with the old or just + * to overwrite them + * @param int Tells the group of strings for which style should be set. + * @since 1.0.0 + */ + function set_strings_style($style, $preserve_defaults = false, $group = 0) { + if (!$preserve_defaults) { + $this->language_data['STYLES']['STRINGS'][$group] = $style; + } else { + $this->language_data['STYLES']['STRINGS'][$group] .= $style; + } + } + + /** + * Turns highlighting on/off for strings + * + * @param boolean Whether to turn highlighting for strings on or off + * @since 1.0.0 + */ + function set_strings_highlighting($flag) { + $this->lexic_permissions['STRINGS'] = ($flag) ? true : false; + } + + /** + * Sets the styles for strict code blocks. If $preserve_defaults is + * true, then styles are merged with the default styles, with the + * user defined styles having priority + * + * @param string The style to make the script blocks + * @param boolean Whether to merge the new styles with the old or just + * to overwrite them + * @param int Tells the group of script blocks for which style should be set. + * @since 1.0.8.4 + */ + function set_script_style($style, $preserve_defaults = false, $group = 0) { + // Update the style of symbols + if (!$preserve_defaults) { + $this->language_data['STYLES']['SCRIPT'][$group] = $style; + } else { + $this->language_data['STYLES']['SCRIPT'][$group] .= $style; + } + } + + /** + * Sets the styles for numbers. If $preserve_defaults is + * true, then styles are merged with the default styles, with the + * user defined styles having priority + * + * @param string The style to make the numbers + * @param boolean Whether to merge the new styles with the old or just + * to overwrite them + * @param int Tells the group of numbers for which style should be set. + * @since 1.0.0 + */ + function set_numbers_style($style, $preserve_defaults = false, $group = 0) { + if (!$preserve_defaults) { + $this->language_data['STYLES']['NUMBERS'][$group] = $style; + } else { + $this->language_data['STYLES']['NUMBERS'][$group] .= $style; + } + } + + /** + * Turns highlighting on/off for numbers + * + * @param boolean Whether to turn highlighting for numbers on or off + * @since 1.0.0 + */ + function set_numbers_highlighting($flag) { + $this->lexic_permissions['NUMBERS'] = ($flag) ? true : false; + } + + /** + * Sets the styles for methods. $key is a number that references the + * appropriate "object splitter" - see the language file for the language + * you are highlighting to get this number. If $preserve_defaults is + * true, then styles are merged with the default styles, with the + * user defined styles having priority + * + * @param int The key of the object splitter to change the styles of + * @param string The style to make the methods + * @param boolean Whether to merge the new styles with the old or just + * to overwrite them + * @since 1.0.0 + */ + function set_methods_style($key, $style, $preserve_defaults = false) { + if (!$preserve_defaults) { + $this->language_data['STYLES']['METHODS'][$key] = $style; + } else { + $this->language_data['STYLES']['METHODS'][$key] .= $style; + } + } + + /** + * Turns highlighting on/off for methods + * + * @param boolean Whether to turn highlighting for methods on or off + * @since 1.0.0 + */ + function set_methods_highlighting($flag) { + $this->lexic_permissions['METHODS'] = ($flag) ? true : false; + } + + /** + * Sets the styles for regexps. If $preserve_defaults is + * true, then styles are merged with the default styles, with the + * user defined styles having priority + * + * @param string The style to make the regular expression matches + * @param boolean Whether to merge the new styles with the old or just + * to overwrite them + * @since 1.0.0 + */ + function set_regexps_style($key, $style, $preserve_defaults = false) { + if (!$preserve_defaults) { + $this->language_data['STYLES']['REGEXPS'][$key] = $style; + } else { + $this->language_data['STYLES']['REGEXPS'][$key] .= $style; + } + } + + /** + * Turns highlighting on/off for regexps + * + * @param int The key of the regular expression group to turn on or off + * @param boolean Whether to turn highlighting for the regular expression group on or off + * @since 1.0.0 + */ + function set_regexps_highlighting($key, $flag) { + $this->lexic_permissions['REGEXPS'][$key] = ($flag) ? true : false; + } + + /** + * Sets whether a set of keywords are checked for in a case sensitive manner + * + * @param int The key of the keyword group to change the case sensitivity of + * @param boolean Whether to check in a case sensitive manner or not + * @since 1.0.0 + */ + function set_case_sensitivity($key, $case) { + $this->language_data['CASE_SENSITIVE'][$key] = ($case) ? true : false; + } + + /** + * Sets the case that keywords should use when found. Use the constants: + * + * - GESHI_CAPS_NO_CHANGE: leave keywords as-is + * - GESHI_CAPS_UPPER: convert all keywords to uppercase where found + * - GESHI_CAPS_LOWER: convert all keywords to lowercase where found + * + * @param int A constant specifying what to do with matched keywords + * @since 1.0.1 + */ + function set_case_keywords($case) { + if (in_array($case, array( + GESHI_CAPS_NO_CHANGE, GESHI_CAPS_UPPER, GESHI_CAPS_LOWER))) { + $this->language_data['CASE_KEYWORDS'] = $case; + } + } + + /** + * Sets how many spaces a tab is substituted for + * + * Widths below zero are ignored + * + * @param int The tab width + * @since 1.0.0 + */ + function set_tab_width($width) { + $this->tab_width = intval($width); + + //Check if it fit's the constraints: + if ($this->tab_width < 1) { + //Return it to the default + $this->tab_width = 8; + } + } + + /** + * Sets whether or not to use tab-stop width specifed by language + * + * @param boolean Whether to use language-specific tab-stop widths + * @since 1.0.7.20 + */ + function set_use_language_tab_width($use) { + $this->use_language_tab_width = (bool) $use; + } + + /** + * Returns the tab width to use, based on the current language and user + * preference + * + * @return int Tab width + * @since 1.0.7.20 + */ + function get_real_tab_width() { + if (!$this->use_language_tab_width || + !isset($this->language_data['TAB_WIDTH'])) { + return $this->tab_width; + } else { + return $this->language_data['TAB_WIDTH']; + } + } + + /** + * Enables/disables strict highlighting. Default is off, calling this + * method without parameters will turn it on. See documentation + * for more details on strict mode and where to use it. + * + * @param boolean Whether to enable strict mode or not + * @since 1.0.0 + */ + function enable_strict_mode($mode = true) { + if (GESHI_MAYBE == $this->language_data['STRICT_MODE_APPLIES']) { + $this->strict_mode = ($mode) ? GESHI_ALWAYS : GESHI_NEVER; + } + } + + /** + * Disables all highlighting + * + * @since 1.0.0 + * @todo Rewrite with array traversal + * @deprecated In favour of enable_highlighting + */ + function disable_highlighting() { + $this->enable_highlighting(false); + } + + /** + * Enables all highlighting + * + * The optional flag parameter was added in version 1.0.7.21 and can be used + * to enable (true) or disable (false) all highlighting. + * + * @since 1.0.0 + * @param boolean A flag specifying whether to enable or disable all highlighting + * @todo Rewrite with array traversal + */ + function enable_highlighting($flag = true) { + $flag = $flag ? true : false; + foreach ($this->lexic_permissions as $key => $value) { + if (is_array($value)) { + foreach ($value as $k => $v) { + $this->lexic_permissions[$key][$k] = $flag; + } + } else { + $this->lexic_permissions[$key] = $flag; + } + } + + // Context blocks + $this->enable_important_blocks = $flag; + } + + /** + * Given a file extension, this method returns either a valid geshi language + * name, or the empty string if it couldn't be found + * + * @param string The extension to get a language name for + * @param array A lookup array to use instead of the default one + * @since 1.0.5 + * @todo Re-think about how this method works (maybe make it private and/or make it + * a extension->lang lookup?) + * @todo static? + */ + function get_language_name_from_extension( $extension, $lookup = array() ) { + if ( !is_array($lookup) || empty($lookup)) { + $lookup = array( + 'abap' => array('abap'), + 'actionscript' => array('as'), + 'ada' => array('a', 'ada', 'adb', 'ads'), + 'apache' => array('conf'), + 'asm' => array('ash', 'asm', 'inc'), + 'asp' => array('asp'), + 'bash' => array('sh'), + 'bf' => array('bf'), + 'c' => array('c', 'h'), + 'c_mac' => array('c', 'h'), + 'caddcl' => array(), + 'cadlisp' => array(), + 'cdfg' => array('cdfg'), + 'cobol' => array('cbl'), + 'cpp' => array('cpp', 'hpp', 'C', 'H', 'CPP', 'HPP'), + 'csharp' => array('cs'), + 'css' => array('css'), + 'd' => array('d'), + 'delphi' => array('dpk', 'dpr', 'pp', 'pas'), + 'diff' => array('diff', 'patch'), + 'dos' => array('bat', 'cmd'), + 'gdb' => array('kcrash', 'crash', 'bt'), + 'gettext' => array('po', 'pot'), + 'gml' => array('gml'), + 'gnuplot' => array('plt'), + 'groovy' => array('groovy'), + 'haskell' => array('hs'), + 'html4strict' => array('html', 'htm'), + 'ini' => array('ini', 'desktop'), + 'java' => array('java'), + 'javascript' => array('js'), + 'klonec' => array('kl1'), + 'klonecpp' => array('klx'), + 'latex' => array('tex'), + 'lisp' => array('lisp'), + 'lua' => array('lua'), + 'matlab' => array('m'), + 'mpasm' => array(), + 'mysql' => array('sql'), + 'nsis' => array(), + 'objc' => array(), + 'oobas' => array(), + 'oracle8' => array(), + 'oracle10' => array(), + 'pascal' => array('pas'), + 'perl' => array('pl', 'pm'), + 'php' => array('php', 'php5', 'phtml', 'phps'), + 'povray' => array('pov'), + 'providex' => array('pvc', 'pvx'), + 'prolog' => array('pl'), + 'python' => array('py'), + 'qbasic' => array('bi'), + 'reg' => array('reg'), + 'ruby' => array('rb'), + 'sas' => array('sas'), + 'scala' => array('scala'), + 'scheme' => array('scm'), + 'scilab' => array('sci'), + 'smalltalk' => array('st'), + 'smarty' => array(), + 'tcl' => array('tcl'), + 'vb' => array('bas'), + 'vbnet' => array(), + 'visualfoxpro' => array(), + 'whitespace' => array('ws'), + 'xml' => array('xml', 'svg', 'xrc'), + 'z80' => array('z80', 'asm', 'inc') + ); + } + + foreach ($lookup as $lang => $extensions) { + if (in_array($extension, $extensions)) { + return $lang; + } + } + return ''; + } + + /** + * Given a file name, this method loads its contents in, and attempts + * to set the language automatically. An optional lookup table can be + * passed for looking up the language name. If not specified a default + * table is used + * + * The language table is in the form + * 
array(
+     *   'lang_name' => array('extension', 'extension', ...),
+     *   'lang_name' ...
+     * );
+ * + * @param string The filename to load the source from + * @param array A lookup array to use instead of the default one + * @todo Complete rethink of this and above method + * @since 1.0.5 + */ + function load_from_file($file_name, $lookup = array()) { + if (is_readable($file_name)) { + $this->set_source(file_get_contents($file_name)); + $this->set_language($this->get_language_name_from_extension(substr(strrchr($file_name, '.'), 1), $lookup)); + } else { + $this->error = GESHI_ERROR_FILE_NOT_READABLE; + } + } + + /** + * Adds a keyword to a keyword group for highlighting + * + * @param int The key of the keyword group to add the keyword to + * @param string The word to add to the keyword group + * @since 1.0.0 + */ + function add_keyword($key, $word) { + if (!in_array($word, $this->language_data['KEYWORDS'][$key])) { + $this->language_data['KEYWORDS'][$key][] = $word; + + //NEW in 1.0.8 don't recompile the whole optimized regexp, simply append it + if ($this->parse_cache_built) { + $subkey = count($this->language_data['CACHED_KEYWORD_LISTS'][$key]) - 1; + $this->language_data['CACHED_KEYWORD_LISTS'][$key][$subkey] .= '|' . preg_quote($word, '/'); + } + } + } + + /** + * Removes a keyword from a keyword group + * + * @param int The key of the keyword group to remove the keyword from + * @param string The word to remove from the keyword group + * @param bool Wether to automatically recompile the optimized regexp list or not. + * Note: if you set this to false and @see GeSHi->parse_code() was already called once, + * for the current language, you have to manually call @see GeSHi->optimize_keyword_group() + * or the removed keyword will stay in cache and still be highlighted! On the other hand + * it might be too expensive to recompile the regexp list for every removal if you want to + * remove a lot of keywords. + * @since 1.0.0 + */ + function remove_keyword($key, $word, $recompile = true) { + $key_to_remove = array_search($word, $this->language_data['KEYWORDS'][$key]); + if ($key_to_remove !== false) { + unset($this->language_data['KEYWORDS'][$key][$key_to_remove]); + + //NEW in 1.0.8, optionally recompile keyword group + if ($recompile && $this->parse_cache_built) { + $this->optimize_keyword_group($key); + } + } + } + + /** + * Creates a new keyword group + * + * @param int The key of the keyword group to create + * @param string The styles for the keyword group + * @param boolean Whether the keyword group is case sensitive ornot + * @param array The words to use for the keyword group + * @since 1.0.0 + */ + function add_keyword_group($key, $styles, $case_sensitive = true, $words = array()) { + $words = (array) $words; + if (empty($words)) { + // empty word lists mess up highlighting + return false; + } + + //Add the new keyword group internally + $this->language_data['KEYWORDS'][$key] = $words; + $this->lexic_permissions['KEYWORDS'][$key] = true; + $this->language_data['CASE_SENSITIVE'][$key] = $case_sensitive; + $this->language_data['STYLES']['KEYWORDS'][$key] = $styles; + + //NEW in 1.0.8, cache keyword regexp + if ($this->parse_cache_built) { + $this->optimize_keyword_group($key); + } + } + + /** + * Removes a keyword group + * + * @param int The key of the keyword group to remove + * @since 1.0.0 + */ + function remove_keyword_group ($key) { + //Remove the keyword group internally + unset($this->language_data['KEYWORDS'][$key]); + unset($this->lexic_permissions['KEYWORDS'][$key]); + unset($this->language_data['CASE_SENSITIVE'][$key]); + unset($this->language_data['STYLES']['KEYWORDS'][$key]); + + //NEW in 1.0.8 + unset($this->language_data['CACHED_KEYWORD_LISTS'][$key]); + } + + /** + * compile optimized regexp list for keyword group + * + * @param int The key of the keyword group to compile & optimize + * @since 1.0.8 + */ + function optimize_keyword_group($key) { + $this->language_data['CACHED_KEYWORD_LISTS'][$key] = + $this->optimize_regexp_list($this->language_data['KEYWORDS'][$key]); + $space_as_whitespace = false; + if(isset($this->language_data['PARSER_CONTROL'])) { + if(isset($this->language_data['PARSER_CONTROL']['KEYWORDS'])) { + if(isset($this->language_data['PARSER_CONTROL']['KEYWORDS']['SPACE_AS_WHITESPACE'])) { + $space_as_whitespace = $this->language_data['PARSER_CONTROL']['KEYWORDS']['SPACE_AS_WHITESPACE']; + } + if(isset($this->language_data['PARSER_CONTROL']['KEYWORDS'][$key]['SPACE_AS_WHITESPACE'])) { + if(isset($this->language_data['PARSER_CONTROL']['KEYWORDS'][$key]['SPACE_AS_WHITESPACE'])) { + $space_as_whitespace = $this->language_data['PARSER_CONTROL']['KEYWORDS'][$key]['SPACE_AS_WHITESPACE']; + } + } + } + } + if($space_as_whitespace) { + foreach($this->language_data['CACHED_KEYWORD_LISTS'][$key] as $rxk => $rxv) { + $this->language_data['CACHED_KEYWORD_LISTS'][$key][$rxk] = + str_replace(" ", "\\s+", $rxv); + } + } + } + + /** + * Alias for parse_code() function + * @param none + * @return none + */ + function output(){ + return $this->parse_code(); + } + + /** + * Sets the content of the header block + * + * @param string The content of the header block + * @since 1.0.2 + */ + function set_header_content($content) { + $this->header_content = $content; + } + + /** + * Sets the content of the footer block + * + * @param string The content of the footer block + * @since 1.0.2 + */ + function set_footer_content($content) { + $this->footer_content = $content; + } + + /** + * Sets the style for the header content + * + * @param string The style for the header content + * @since 1.0.2 + */ + function set_header_content_style($style) { + $this->header_content_style = $style; + } + + /** + * Sets the style for the footer content + * + * @param string The style for the footer content + * @since 1.0.2 + */ + function set_footer_content_style($style) { + $this->footer_content_style = $style; + } + + /** + * Sets whether to force a surrounding block around + * the highlighted code or not + * + * @param boolean Tells whether to enable or disable this feature + * @since 1.0.7.20 + */ + function enable_inner_code_block($flag) { + $this->force_code_block = (bool)$flag; + } + + /** + * Sets the base URL to be used for keywords + * + * @param int The key of the keyword group to set the URL for + * @param string The URL to set for the group. If {FNAME} is in + * the url somewhere, it is replaced by the keyword + * that the URL is being made for + * @since 1.0.2 + */ + function set_url_for_keyword_group($group, $url) { + $this->language_data['URLS'][$group] = $url; + } + + /** + * Sets styles for links in code + * + * @param int A constant that specifies what state the style is being + * set for - e.g. :hover or :visited + * @param string The styles to use for that state + * @since 1.0.2 + */ + function set_link_styles($type, $styles) { + $this->link_styles[$type] = $styles; + } + + /** + * Sets the target for links in code + * + * @param string The target for links in the code, e.g. _blank + * @since 1.0.3 + */ + function set_link_target($target) { + if (!$target) { + $this->link_target = ''; + } else { + $this->link_target = ' target="' . $target . '"'; + } + } + + /** + * Sets styles for important parts of the code + * + * @param string The styles to use on important parts of the code + * @since 1.0.2 + */ + function set_important_styles($styles) { + $this->important_styles = $styles; + } + + /** + * Sets whether context-important blocks are highlighted + * + * @param boolean Tells whether to enable or disable highlighting of important blocks + * @todo REMOVE THIS SHIZ FROM GESHI! + * @deprecated + * @since 1.0.2 + */ + function enable_important_blocks($flag) { + $this->enable_important_blocks = ( $flag ) ? true : false; + } + + /** + * Whether CSS IDs should be added to each line + * + * @param boolean If true, IDs will be added to each line. + * @since 1.0.2 + */ + function enable_ids($flag = true) { + $this->add_ids = ($flag) ? true : false; + } + + /** + * Specifies which lines to highlight extra + * + * The extra style parameter was added in 1.0.7.21. + * + * @param mixed An array of line numbers to highlight, or just a line + * number on its own. + * @param string A string specifying the style to use for this line. + * If null is specified, the default style is used. + * If false is specified, the line will be removed from + * special highlighting + * @since 1.0.2 + * @todo Some data replication here that could be cut down on + */ + function highlight_lines_extra($lines, $style = null) { + if (is_array($lines)) { + //Split up the job using single lines at a time + foreach ($lines as $line) { + $this->highlight_lines_extra($line, $style); + } + } else { + //Mark the line as being highlighted specially + $lines = intval($lines); + $this->highlight_extra_lines[$lines] = $lines; + + //Decide on which style to use + if ($style === null) { //Check if we should use default style + unset($this->highlight_extra_lines_styles[$lines]); + } else if ($style === false) { //Check if to remove this line + unset($this->highlight_extra_lines[$lines]); + unset($this->highlight_extra_lines_styles[$lines]); + } else { + $this->highlight_extra_lines_styles[$lines] = $style; + } + } + } + + /** + * Sets the style for extra-highlighted lines + * + * @param string The style for extra-highlighted lines + * @since 1.0.2 + */ + function set_highlight_lines_extra_style($styles) { + $this->highlight_extra_lines_style = $styles; + } + + /** + * Sets the line-ending + * + * @param string The new line-ending + * @since 1.0.2 + */ + function set_line_ending($line_ending) { + $this->line_ending = (string)$line_ending; + } + + /** + * Sets what number line numbers should start at. Should + * be a positive integer, and will be converted to one. + * + * Warning: Using this method will add the "start" + * attribute to the <ol> that is used for line numbering. + * This is not valid XHTML strict, so if that's what you + * care about then don't use this method. Firefox is getting + * support for the CSS method of doing this in 1.1 and Opera + * has support for the CSS method, but (of course) IE doesn't + * so it's not worth doing it the CSS way yet. + * + * @param int The number to start line numbers at + * @since 1.0.2 + */ + function start_line_numbers_at($number) { + $this->line_numbers_start = abs(intval($number)); + } + + /** + * Sets the encoding used for htmlspecialchars(), for international + * support. + * + * NOTE: This is not needed for now because htmlspecialchars() is not + * being used (it has a security hole in PHP4 that has not been patched). + * Maybe in a future version it may make a return for speed reasons, but + * I doubt it. + * + * @param string The encoding to use for the source + * @since 1.0.3 + */ + function set_encoding($encoding) { + if ($encoding) { + $this->encoding = strtolower($encoding); + } + } + + /** + * Turns linking of keywords on or off. + * + * @param boolean If true, links will be added to keywords + * @since 1.0.2 + */ + function enable_keyword_links($enable = true) { + $this->keyword_links = (bool) $enable; + } + + /** + * Setup caches needed for styling. This is automatically called in + * parse_code() and get_stylesheet() when appropriate. This function helps + * stylesheet generators as they rely on some style information being + * preprocessed + * + * @since 1.0.8 + * @access private + */ + function build_style_cache() { + //Build the style cache needed to highlight numbers appropriate + if($this->lexic_permissions['NUMBERS']) { + //First check what way highlighting information for numbers are given + if(!isset($this->language_data['NUMBERS'])) { + $this->language_data['NUMBERS'] = 0; + } + + if(is_array($this->language_data['NUMBERS'])) { + $this->language_data['NUMBERS_CACHE'] = $this->language_data['NUMBERS']; + } else { + $this->language_data['NUMBERS_CACHE'] = array(); + if(!$this->language_data['NUMBERS']) { + $this->language_data['NUMBERS'] = + GESHI_NUMBER_INT_BASIC | + GESHI_NUMBER_FLT_NONSCI; + } + + for($i = 0, $j = $this->language_data['NUMBERS']; $j > 0; ++$i, $j>>=1) { + //Rearrange style indices if required ... + if(isset($this->language_data['STYLES']['NUMBERS'][1<<$i])) { + $this->language_data['STYLES']['NUMBERS'][$i] = + $this->language_data['STYLES']['NUMBERS'][1<<$i]; + unset($this->language_data['STYLES']['NUMBERS'][1<<$i]); + } + + //Check if this bit is set for highlighting + if($j&1) { + //So this bit is set ... + //Check if it belongs to group 0 or the actual stylegroup + if(isset($this->language_data['STYLES']['NUMBERS'][$i])) { + $this->language_data['NUMBERS_CACHE'][$i] = 1 << $i; + } else { + if(!isset($this->language_data['NUMBERS_CACHE'][0])) { + $this->language_data['NUMBERS_CACHE'][0] = 0; + } + $this->language_data['NUMBERS_CACHE'][0] |= 1 << $i; + } + } + } + } + } + } + + /** + * Setup caches needed for parsing. This is automatically called in parse_code() when appropriate. + * This function makes stylesheet generators much faster as they do not need these caches. + * + * @since 1.0.8 + * @access private + */ + function build_parse_cache() { + // cache symbol regexp + //As this is a costy operation, we avoid doing it for multiple groups ... + //Instead we perform it for all symbols at once. + // + //For this to work, we need to reorganize the data arrays. + if ($this->lexic_permissions['SYMBOLS'] && !empty($this->language_data['SYMBOLS'])) { + $this->language_data['MULTIPLE_SYMBOL_GROUPS'] = count($this->language_data['STYLES']['SYMBOLS']) > 1; + + $this->language_data['SYMBOL_DATA'] = array(); + $symbol_preg_multi = array(); // multi char symbols + $symbol_preg_single = array(); // single char symbols + foreach ($this->language_data['SYMBOLS'] as $key => $symbols) { + if (is_array($symbols)) { + foreach ($symbols as $sym) { + $sym = $this->hsc($sym); + if (!isset($this->language_data['SYMBOL_DATA'][$sym])) { + $this->language_data['SYMBOL_DATA'][$sym] = $key; + if (isset($sym[1])) { // multiple chars + $symbol_preg_multi[] = preg_quote($sym, '/'); + } else { // single char + if ($sym == '-') { + // don't trigger range out of order error + $symbol_preg_single[] = '\-'; + } else { + $symbol_preg_single[] = preg_quote($sym, '/'); + } + } + } + } + } else { + $symbols = $this->hsc($symbols); + if (!isset($this->language_data['SYMBOL_DATA'][$symbols])) { + $this->language_data['SYMBOL_DATA'][$symbols] = 0; + if (isset($symbols[1])) { // multiple chars + $symbol_preg_multi[] = preg_quote($symbols, '/'); + } else if ($symbols == '-') { + // don't trigger range out of order error + $symbol_preg_single[] = '\-'; + } else { // single char + $symbol_preg_single[] = preg_quote($symbols, '/'); + } + } + } + } + + //Now we have an array with each possible symbol as the key and the style as the actual data. + //This way we can set the correct style just the moment we highlight ... + // + //Now we need to rewrite our array to get a search string that + $symbol_preg = array(); + if (!empty($symbol_preg_multi)) { + rsort($symbol_preg_multi); + $symbol_preg[] = implode('|', $symbol_preg_multi); + } + if (!empty($symbol_preg_single)) { + rsort($symbol_preg_single); + $symbol_preg[] = '[' . implode('', $symbol_preg_single) . ']'; + } + $this->language_data['SYMBOL_SEARCH'] = implode("|", $symbol_preg); + } + + // cache optimized regexp for keyword matching + // remove old cache + $this->language_data['CACHED_KEYWORD_LISTS'] = array(); + foreach (array_keys($this->language_data['KEYWORDS']) as $key) { + if (!isset($this->lexic_permissions['KEYWORDS'][$key]) || + $this->lexic_permissions['KEYWORDS'][$key]) { + $this->optimize_keyword_group($key); + } + } + + // brackets + if ($this->lexic_permissions['BRACKETS']) { + $this->language_data['CACHE_BRACKET_MATCH'] = array('[', ']', '(', ')', '{', '}'); + if (!$this->use_classes && isset($this->language_data['STYLES']['BRACKETS'][0])) { + $this->language_data['CACHE_BRACKET_REPLACE'] = array( + '<| style="' . $this->language_data['STYLES']['BRACKETS'][0] . '">[|>', + '<| style="' . $this->language_data['STYLES']['BRACKETS'][0] . '">]|>', + '<| style="' . $this->language_data['STYLES']['BRACKETS'][0] . '">(|>', + '<| style="' . $this->language_data['STYLES']['BRACKETS'][0] . '">)|>', + '<| style="' . $this->language_data['STYLES']['BRACKETS'][0] . '">{|>', + '<| style="' . $this->language_data['STYLES']['BRACKETS'][0] . '">}|>', + ); + } + else { + $this->language_data['CACHE_BRACKET_REPLACE'] = array( + '<| class="br0">[|>', + '<| class="br0">]|>', + '<| class="br0">(|>', + '<| class="br0">)|>', + '<| class="br0">{|>', + '<| class="br0">}|>', + ); + } + } + + //Build the parse cache needed to highlight numbers appropriate + if($this->lexic_permissions['NUMBERS']) { + //Check if the style rearrangements have been processed ... + //This also does some preprocessing to check which style groups are useable ... + if(!isset($this->language_data['NUMBERS_CACHE'])) { + $this->build_style_cache(); + } + + //Number format specification + //All this formats are matched case-insensitively! + static $numbers_format = array( + GESHI_NUMBER_INT_BASIC => + '(? + '(? + '(? + '(? + '(? + '(? + '(? + '(? + '(? + '(? + '(? + '(? + '(? + '(?language_data['NUMBERS_RXCACHE'] = array(); + foreach($this->language_data['NUMBERS_CACHE'] as $key => $rxdata) { + if(is_string($rxdata)) { + $regexp = $rxdata; + } else { + //This is a bitfield of number flags to highlight: + //Build an array, implode them together and make this the actual RX + $rxuse = array(); + for($i = 1; $i <= $rxdata; $i<<=1) { + if($rxdata & $i) { + $rxuse[] = $numbers_format[$i]; + } + } + $regexp = implode("|", $rxuse); + } + + $this->language_data['NUMBERS_RXCACHE'][$key] = + "/(?)($regexp)(?!(?:|[^\<])+>)(?![^<]*>)(?!\|>)(?!\/>)/i"; // + } + } + + $this->parse_cache_built = true; + } + + /** + * Returns the code in $this->source, highlighted and surrounded by the + * nessecary HTML. + * + * This should only be called ONCE, cos it's SLOW! If you want to highlight + * the same source multiple times, you're better off doing a whole lot of + * str_replaces to replace the <span>s + * + * @since 1.0.0 + */ + function parse_code () { + // Start the timer + $start_time = microtime(); + + // Replace all newlines to a common form. + $code = str_replace("\r\n", "\n", $this->source); + $code = str_replace("\r", "\n", $code); + + // Firstly, if there is an error, we won't highlight + if ($this->error) { + //Escape the source for output + $result = $this->hsc($this->source); + + //This fix is related to SF#1923020, but has to be applied regardless of + //actually highlighting symbols. + $result = str_replace(array('', ''), array(';', '|'), $result); + + // Timing is irrelevant + $this->set_time($start_time, $start_time); + $this->finalise($result); + return $result; + } + + // make sure the parse cache is up2date + if (!$this->parse_cache_built) { + $this->build_parse_cache(); + } + + // Initialise various stuff + $length = strlen($code); + $COMMENT_MATCHED = false; + $stuff_to_parse = ''; + $endresult = ''; + + // "Important" selections are handled like multiline comments + // @todo GET RID OF THIS SHIZ + if ($this->enable_important_blocks) { + $this->language_data['COMMENT_MULTI'][GESHI_START_IMPORTANT] = GESHI_END_IMPORTANT; + } + + if ($this->strict_mode) { + // Break the source into bits. Each bit will be a portion of the code + // within script delimiters - for example, HTML between < and > + $k = 0; + $parts = array(); + $matches = array(); + $next_match_pointer = null; + // we use a copy to unset delimiters on demand (when they are not found) + $delim_copy = $this->language_data['SCRIPT_DELIMITERS']; + $i = 0; + while ($i < $length) { + $next_match_pos = $length + 1; // never true + foreach ($delim_copy as $dk => $delimiters) { + if(is_array($delimiters)) { + foreach ($delimiters as $open => $close) { + // make sure the cache is setup properly + if (!isset($matches[$dk][$open])) { + $matches[$dk][$open] = array( + 'next_match' => -1, + 'dk' => $dk, + + 'open' => $open, // needed for grouping of adjacent code blocks (see below) + 'open_strlen' => strlen($open), + + 'close' => $close, + 'close_strlen' => strlen($close), + ); + } + // Get the next little bit for this opening string + if ($matches[$dk][$open]['next_match'] < $i) { + // only find the next pos if it was not already cached + $open_pos = strpos($code, $open, $i); + if ($open_pos === false) { + // no match for this delimiter ever + unset($delim_copy[$dk][$open]); + continue; + } + $matches[$dk][$open]['next_match'] = $open_pos; + } + if ($matches[$dk][$open]['next_match'] < $next_match_pos) { + //So we got a new match, update the close_pos + $matches[$dk][$open]['close_pos'] = + strpos($code, $close, $matches[$dk][$open]['next_match']+1); + + $next_match_pointer =& $matches[$dk][$open]; + $next_match_pos = $matches[$dk][$open]['next_match']; + } + } + } else { + //So we should match an RegExp as Strict Block ... + /** + * The value in $delimiters is expected to be an RegExp + * containing exactly 2 matching groups: + * - Group 1 is the opener + * - Group 2 is the closer + */ + if(!GESHI_PHP_PRE_433 && //Needs proper rewrite to work with PHP >=4.3.0; 4.3.3 is guaranteed to work. + preg_match($delimiters, $code, $matches_rx, PREG_OFFSET_CAPTURE, $i)) { + //We got a match ... + if(isset($matches_rx['start']) && isset($matches_rx['end'])) + { + $matches[$dk] = array( + 'next_match' => $matches_rx['start'][1], + 'dk' => $dk, + + 'close_strlen' => strlen($matches_rx['end'][0]), + 'close_pos' => $matches_rx['end'][1], + ); + } else { + $matches[$dk] = array( + 'next_match' => $matches_rx[1][1], + 'dk' => $dk, + + 'close_strlen' => strlen($matches_rx[2][0]), + 'close_pos' => $matches_rx[2][1], + ); + } + } else { + // no match for this delimiter ever + unset($delim_copy[$dk]); + continue; + } + + if ($matches[$dk]['next_match'] <= $next_match_pos) { + $next_match_pointer =& $matches[$dk]; + $next_match_pos = $matches[$dk]['next_match']; + } + } + } + + // non-highlightable text + $parts[$k] = array( + 1 => substr($code, $i, $next_match_pos - $i) + ); + ++$k; + + if ($next_match_pos > $length) { + // out of bounds means no next match was found + break; + } + + // highlightable code + $parts[$k][0] = $next_match_pointer['dk']; + + //Only combine for non-rx script blocks + if(is_array($delim_copy[$next_match_pointer['dk']])) { + // group adjacent script blocks, e.g. should be one block, not three! + $i = $next_match_pos + $next_match_pointer['open_strlen']; + while (true) { + $close_pos = strpos($code, $next_match_pointer['close'], $i); + if ($close_pos == false) { + break; + } + $i = $close_pos + $next_match_pointer['close_strlen']; + if ($i == $length) { + break; + } + if ($code[$i] == $next_match_pointer['open'][0] && ($next_match_pointer['open_strlen'] == 1 || + substr($code, $i, $next_match_pointer['open_strlen']) == $next_match_pointer['open'])) { + // merge adjacent but make sure we don't merge things like + foreach ($matches as $submatches) { + foreach ($submatches as $match) { + if ($match['next_match'] == $i) { + // a different block already matches here! + break 3; + } + } + } + } else { + break; + } + } + } else { + $close_pos = $next_match_pointer['close_pos'] + $next_match_pointer['close_strlen']; + $i = $close_pos; + } + + if ($close_pos === false) { + // no closing delimiter found! + $parts[$k][1] = substr($code, $next_match_pos); + ++$k; + break; + } else { + $parts[$k][1] = substr($code, $next_match_pos, $i - $next_match_pos); + ++$k; + } + } + unset($delim_copy, $next_match_pointer, $next_match_pos, $matches); + $num_parts = $k; + + if ($num_parts == 1 && $this->strict_mode == GESHI_MAYBE) { + // when we have only one part, we don't have anything to highlight at all. + // if we have a "maybe" strict language, this should be handled as highlightable code + $parts = array( + 0 => array( + 0 => '', + 1 => '' + ), + 1 => array( + 0 => null, + 1 => $parts[0][1] + ) + ); + $num_parts = 2; + } + + } else { + // Not strict mode - simply dump the source into + // the array at index 1 (the first highlightable block) + $parts = array( + 0 => array( + 0 => '', + 1 => '' + ), + 1 => array( + 0 => null, + 1 => $code + ) + ); + $num_parts = 2; + } + + //Unset variables we won't need any longer + unset($code); + + //Preload some repeatedly used values regarding hardquotes ... + $hq = isset($this->language_data['HARDQUOTE']) ? $this->language_data['HARDQUOTE'][0] : false; + $hq_strlen = strlen($hq); + + //Preload if line numbers are to be generated afterwards + //Added a check if line breaks should be forced even without line numbers, fixes SF#1727398 + $check_linenumbers = $this->line_numbers != GESHI_NO_LINE_NUMBERS || + !empty($this->highlight_extra_lines) || !$this->allow_multiline_span; + + //preload the escape char for faster checking ... + $escaped_escape_char = $this->hsc($this->language_data['ESCAPE_CHAR']); + + // this is used for single-line comments + $sc_disallowed_before = ""; + $sc_disallowed_after = ""; + + if (isset($this->language_data['PARSER_CONTROL'])) { + if (isset($this->language_data['PARSER_CONTROL']['COMMENTS'])) { + if (isset($this->language_data['PARSER_CONTROL']['COMMENTS']['DISALLOWED_BEFORE'])) { + $sc_disallowed_before = $this->language_data['PARSER_CONTROL']['COMMENTS']['DISALLOWED_BEFORE']; + } + if (isset($this->language_data['PARSER_CONTROL']['COMMENTS']['DISALLOWED_AFTER'])) { + $sc_disallowed_after = $this->language_data['PARSER_CONTROL']['COMMENTS']['DISALLOWED_AFTER']; + } + } + } + + //Fix for SF#1932083: Multichar Quotemarks unsupported + $is_string_starter = array(); + if ($this->lexic_permissions['STRINGS']) { + foreach ($this->language_data['QUOTEMARKS'] as $quotemark) { + if (!isset($is_string_starter[$quotemark[0]])) { + $is_string_starter[$quotemark[0]] = (string)$quotemark; + } else if (is_string($is_string_starter[$quotemark[0]])) { + $is_string_starter[$quotemark[0]] = array( + $is_string_starter[$quotemark[0]], + $quotemark); + } else { + $is_string_starter[$quotemark[0]][] = $quotemark; + } + } + } + + // Now we go through each part. We know that even-indexed parts are + // code that shouldn't be highlighted, and odd-indexed parts should + // be highlighted + for ($key = 0; $key < $num_parts; ++$key) { + $STRICTATTRS = ''; + + // If this block should be highlighted... + if (!($key & 1)) { + // Else not a block to highlight + $endresult .= $this->hsc($parts[$key][1]); + unset($parts[$key]); + continue; + } + + $result = ''; + $part = $parts[$key][1]; + + $highlight_part = true; + if ($this->strict_mode && !is_null($parts[$key][0])) { + // get the class key for this block of code + $script_key = $parts[$key][0]; + $highlight_part = $this->language_data['HIGHLIGHT_STRICT_BLOCK'][$script_key]; + if ($this->language_data['STYLES']['SCRIPT'][$script_key] != '' && + $this->lexic_permissions['SCRIPT']) { + // Add a span element around the source to + // highlight the overall source block + if (!$this->use_classes && + $this->language_data['STYLES']['SCRIPT'][$script_key] != '') { + $attributes = ' style="' . $this->language_data['STYLES']['SCRIPT'][$script_key] . '"'; + } else { + $attributes = ' class="sc' . $script_key . '"'; + } + $result .= ""; + $STRICTATTRS = $attributes; + } + } + + if ($highlight_part) { + // Now, highlight the code in this block. This code + // is really the engine of GeSHi (along with the method + // parse_non_string_part). + + // cache comment regexps incrementally + $next_comment_regexp_key = ''; + $next_comment_regexp_pos = -1; + $next_comment_multi_pos = -1; + $next_comment_single_pos = -1; + $comment_regexp_cache_per_key = array(); + $comment_multi_cache_per_key = array(); + $comment_single_cache_per_key = array(); + $next_open_comment_multi = ''; + $next_comment_single_key = ''; + $escape_regexp_cache_per_key = array(); + $next_escape_regexp_key = ''; + $next_escape_regexp_pos = -1; + + $length = strlen($part); + for ($i = 0; $i < $length; ++$i) { + // Get the next char + $char = $part[$i]; + $char_len = 1; + + // update regexp comment cache if needed + if (isset($this->language_data['COMMENT_REGEXP']) && $next_comment_regexp_pos < $i) { + $next_comment_regexp_pos = $length; + foreach ($this->language_data['COMMENT_REGEXP'] as $comment_key => $regexp) { + $match_i = false; + if (isset($comment_regexp_cache_per_key[$comment_key]) && + ($comment_regexp_cache_per_key[$comment_key]['pos'] >= $i || + $comment_regexp_cache_per_key[$comment_key]['pos'] === false)) { + // we have already matched something + if ($comment_regexp_cache_per_key[$comment_key]['pos'] === false) { + // this comment is never matched + continue; + } + $match_i = $comment_regexp_cache_per_key[$comment_key]['pos']; + } else if ( + //This is to allow use of the offset parameter in preg_match and stay as compatible with older PHP versions as possible + (GESHI_PHP_PRE_433 && preg_match($regexp, substr($part, $i), $match, PREG_OFFSET_CAPTURE)) || + (!GESHI_PHP_PRE_433 && preg_match($regexp, $part, $match, PREG_OFFSET_CAPTURE, $i)) + ) { + $match_i = $match[0][1]; + if (GESHI_PHP_PRE_433) { + $match_i += $i; + } + + $comment_regexp_cache_per_key[$comment_key] = array( + 'key' => $comment_key, + 'length' => strlen($match[0][0]), + 'pos' => $match_i + ); + } else { + $comment_regexp_cache_per_key[$comment_key]['pos'] = false; + continue; + } + + if ($match_i !== false && $match_i < $next_comment_regexp_pos) { + $next_comment_regexp_pos = $match_i; + $next_comment_regexp_key = $comment_key; + if ($match_i === $i) { + break; + } + } + } + } + + $string_started = false; + + if (isset($is_string_starter[$char])) { + // Possibly the start of a new string ... + + //Check which starter it was ... + //Fix for SF#1932083: Multichar Quotemarks unsupported + if (is_array($is_string_starter[$char])) { + $char_new = ''; + foreach ($is_string_starter[$char] as $testchar) { + if ($testchar === substr($part, $i, strlen($testchar)) && + strlen($testchar) > strlen($char_new)) { + $char_new = $testchar; + $string_started = true; + } + } + if ($string_started) { + $char = $char_new; + } + } else { + $testchar = $is_string_starter[$char]; + if ($testchar === substr($part, $i, strlen($testchar))) { + $char = $testchar; + $string_started = true; + } + } + $char_len = strlen($char); + } + + if ($string_started && ($i != $next_comment_regexp_pos)) { + // Hand out the correct style information for this string + $string_key = array_search($char, $this->language_data['QUOTEMARKS']); + if (!isset($this->language_data['STYLES']['STRINGS'][$string_key]) || + !isset($this->language_data['STYLES']['ESCAPE_CHAR'][$string_key])) { + $string_key = 0; + } + + // parse the stuff before this + $result .= $this->parse_non_string_part($stuff_to_parse); + $stuff_to_parse = ''; + + if (!$this->use_classes) { + $string_attributes = ' style="' . $this->language_data['STYLES']['STRINGS'][$string_key] . '"'; + } else { + $string_attributes = ' class="st'.$string_key.'"'; + } + + // now handle the string + $string = "" . GeSHi::hsc($char); + $start = $i + $char_len; + $string_open = true; + + if(empty($this->language_data['ESCAPE_REGEXP'])) { + $next_escape_regexp_pos = $length; + } + + do { + //Get the regular ending pos ... + $close_pos = strpos($part, $char, $start); + if(false === $close_pos) { + $close_pos = $length; + } + + if($this->lexic_permissions['ESCAPE_CHAR']) { + // update escape regexp cache if needed + if (isset($this->language_data['ESCAPE_REGEXP']) && $next_escape_regexp_pos < $start) { + $next_escape_regexp_pos = $length; + foreach ($this->language_data['ESCAPE_REGEXP'] as $escape_key => $regexp) { + $match_i = false; + if (isset($escape_regexp_cache_per_key[$escape_key]) && + ($escape_regexp_cache_per_key[$escape_key]['pos'] >= $start || + $escape_regexp_cache_per_key[$escape_key]['pos'] === false)) { + // we have already matched something + if ($escape_regexp_cache_per_key[$escape_key]['pos'] === false) { + // this comment is never matched + continue; + } + $match_i = $escape_regexp_cache_per_key[$escape_key]['pos']; + } else if ( + //This is to allow use of the offset parameter in preg_match and stay as compatible with older PHP versions as possible + (GESHI_PHP_PRE_433 && preg_match($regexp, substr($part, $start), $match, PREG_OFFSET_CAPTURE)) || + (!GESHI_PHP_PRE_433 && preg_match($regexp, $part, $match, PREG_OFFSET_CAPTURE, $start)) + ) { + $match_i = $match[0][1]; + if (GESHI_PHP_PRE_433) { + $match_i += $start; + } + + $escape_regexp_cache_per_key[$escape_key] = array( + 'key' => $escape_key, + 'length' => strlen($match[0][0]), + 'pos' => $match_i + ); + } else { + $escape_regexp_cache_per_key[$escape_key]['pos'] = false; + continue; + } + + if ($match_i !== false && $match_i < $next_escape_regexp_pos) { + $next_escape_regexp_pos = $match_i; + $next_escape_regexp_key = $escape_key; + if ($match_i === $start) { + break; + } + } + } + } + + //Find the next simple escape position + if('' != $this->language_data['ESCAPE_CHAR']) { + $simple_escape = strpos($part, $this->language_data['ESCAPE_CHAR'], $start); + if(false === $simple_escape) { + $simple_escape = $length; + } + } else { + $simple_escape = $length; + } + } else { + $next_escape_regexp_pos = $length; + $simple_escape = $length; + } + + if($simple_escape < $next_escape_regexp_pos && + $simple_escape < $length && + $simple_escape < $close_pos) { + //The nexxt escape sequence is a simple one ... + $es_pos = $simple_escape; + + //Add the stuff not in the string yet ... + $string .= $this->hsc(substr($part, $start, $es_pos - $start)); + + //Get the style for this escaped char ... + if (!$this->use_classes) { + $escape_char_attributes = ' style="' . $this->language_data['STYLES']['ESCAPE_CHAR'][0] . '"'; + } else { + $escape_char_attributes = ' class="es0"'; + } + + //Add the style for the escape char ... + $string .= "" . + GeSHi::hsc($this->language_data['ESCAPE_CHAR']); + + //Get the byte AFTER the ESCAPE_CHAR we just found + $es_char = $part[$es_pos + 1]; + if ($es_char == "\n") { + // don't put a newline around newlines + $string .= "\n"; + $start = $es_pos + 2; + } else if (ord($es_char) >= 128) { + //This is an non-ASCII char (UTF8 or single byte) + //This code tries to work around SF#2037598 ... + if(function_exists('mb_substr')) { + $es_char_m = mb_substr(substr($part, $es_pos+1, 16), 0, 1, $this->encoding); + $string .= $es_char_m . ''; + } else if (!GESHI_PHP_PRE_433 && 'utf-8' == $this->encoding) { + if(preg_match("/[\xC2-\xDF][\x80-\xBF]". + "|\xE0[\xA0-\xBF][\x80-\xBF]". + "|[\xE1-\xEC\xEE\xEF][\x80-\xBF]{2}". + "|\xED[\x80-\x9F][\x80-\xBF]". + "|\xF0[\x90-\xBF][\x80-\xBF]{2}". + "|[\xF1-\xF3][\x80-\xBF]{3}". + "|\xF4[\x80-\x8F][\x80-\xBF]{2}/s", + $part, $es_char_m, null, $es_pos + 1)) { + $es_char_m = $es_char_m[0]; + } else { + $es_char_m = $es_char; + } + $string .= $this->hsc($es_char_m) . ''; + } else { + $es_char_m = $this->hsc($es_char); + } + $start = $es_pos + strlen($es_char_m) + 1; + } else { + $string .= $this->hsc($es_char) . ''; + $start = $es_pos + 2; + } + } else if ($next_escape_regexp_pos < $length && + $next_escape_regexp_pos < $close_pos) { + $es_pos = $next_escape_regexp_pos; + //Add the stuff not in the string yet ... + $string .= $this->hsc(substr($part, $start, $es_pos - $start)); + + //Get the key and length of this match ... + $escape = $escape_regexp_cache_per_key[$next_escape_regexp_key]; + $escape_str = substr($part, $es_pos, $escape['length']); + $escape_key = $escape['key']; + + //Get the style for this escaped char ... + if (!$this->use_classes) { + $escape_char_attributes = ' style="' . $this->language_data['STYLES']['ESCAPE_CHAR'][$escape_key] . '"'; + } else { + $escape_char_attributes = ' class="es' . $escape_key . '"'; + } + + //Add the style for the escape char ... + $string .= "" . + $this->hsc($escape_str) . ''; + + $start = $es_pos + $escape['length']; + } else { + //Copy the remainder of the string ... + $string .= $this->hsc(substr($part, $start, $close_pos - $start + $char_len)) . ''; + $start = $close_pos + $char_len; + $string_open = false; + } + } while($string_open); + + if ($check_linenumbers) { + // Are line numbers used? If, we should end the string before + // the newline and begin it again (so when
  • s are put in the source + // remains XHTML compliant) + // note to self: This opens up possibility of config files specifying + // that languages can/cannot have multiline strings??? + $string = str_replace("\n", "\n", $string); + } + + $result .= $string; + $string = ''; + $i = $start - 1; + continue; + } else if ($this->lexic_permissions['STRINGS'] && $hq && $hq[0] == $char && + substr($part, $i, $hq_strlen) == $hq && ($i != $next_comment_regexp_pos)) { + // The start of a hard quoted string + if (!$this->use_classes) { + $string_attributes = ' style="' . $this->language_data['STYLES']['STRINGS']['HARD'] . '"'; + $escape_char_attributes = ' style="' . $this->language_data['STYLES']['ESCAPE_CHAR']['HARD'] . '"'; + } else { + $string_attributes = ' class="st_h"'; + $escape_char_attributes = ' class="es_h"'; + } + // parse the stuff before this + $result .= $this->parse_non_string_part($stuff_to_parse); + $stuff_to_parse = ''; + + // now handle the string + $string = ''; + + // look for closing quote + $start = $i + $hq_strlen; + while ($close_pos = strpos($part, $this->language_data['HARDQUOTE'][1], $start)) { + $start = $close_pos + 1; + if ($this->lexic_permissions['ESCAPE_CHAR'] && $part[$close_pos - 1] == $this->language_data['HARDCHAR']) { + // make sure this quote is not escaped + foreach ($this->language_data['HARDESCAPE'] as $hardescape) { + if (substr($part, $close_pos - 1, strlen($hardescape)) == $hardescape) { + // check wether this quote is escaped or if it is something like '\\' + $escape_char_pos = $close_pos - 1; + while ($escape_char_pos > 0 + && $part[$escape_char_pos - 1] == $this->language_data['HARDCHAR']) { + --$escape_char_pos; + } + if (($close_pos - $escape_char_pos) & 1) { + // uneven number of escape chars => this quote is escaped + continue 2; + } + } + } + } + + // found closing quote + break; + } + + //Found the closing delimiter? + if (!$close_pos) { + // span till the end of this $part when no closing delimiter is found + $close_pos = $length; + } + + //Get the actual string + $string = substr($part, $i, $close_pos - $i + 1); + $i = $close_pos; + + // handle escape chars and encode html chars + // (special because when we have escape chars within our string they may not be escaped) + if ($this->lexic_permissions['ESCAPE_CHAR'] && $this->language_data['ESCAPE_CHAR']) { + $start = 0; + $new_string = ''; + while ($es_pos = strpos($string, $this->language_data['ESCAPE_CHAR'], $start)) { + // hmtl escape stuff before + $new_string .= $this->hsc(substr($string, $start, $es_pos - $start)); + // check if this is a hard escape + foreach ($this->language_data['HARDESCAPE'] as $hardescape) { + if (substr($string, $es_pos, strlen($hardescape)) == $hardescape) { + // indeed, this is a hardescape + $new_string .= "" . + $this->hsc($hardescape) . ''; + $start = $es_pos + strlen($hardescape); + continue 2; + } + } + // not a hard escape, but a normal escape + // they come in pairs of two + $c = 0; + while (isset($string[$es_pos + $c]) && isset($string[$es_pos + $c + 1]) + && $string[$es_pos + $c] == $this->language_data['ESCAPE_CHAR'] + && $string[$es_pos + $c + 1] == $this->language_data['ESCAPE_CHAR']) { + $c += 2; + } + if ($c) { + $new_string .= "" . + str_repeat($escaped_escape_char, $c) . + ''; + $start = $es_pos + $c; + } else { + // this is just a single lonely escape char... + $new_string .= $escaped_escape_char; + $start = $es_pos + 1; + } + } + $string = $new_string . $this->hsc(substr($string, $start)); + } else { + $string = $this->hsc($string); + } + + if ($check_linenumbers) { + // Are line numbers used? If, we should end the string before + // the newline and begin it again (so when
  • s are put in the source + // remains XHTML compliant) + // note to self: This opens up possibility of config files specifying + // that languages can/cannot have multiline strings??? + $string = str_replace("\n", "\n", $string); + } + + $result .= "" . $string . ''; + $string = ''; + continue; + } else { + //Have a look for regexp comments + if ($i == $next_comment_regexp_pos) { + $COMMENT_MATCHED = true; + $comment = $comment_regexp_cache_per_key[$next_comment_regexp_key]; + $test_str = $this->hsc(substr($part, $i, $comment['length'])); + + //@todo If remove important do remove here + if ($this->lexic_permissions['COMMENTS']['MULTI']) { + if (!$this->use_classes) { + $attributes = ' style="' . $this->language_data['STYLES']['COMMENTS'][$comment['key']] . '"'; + } else { + $attributes = ' class="co' . $comment['key'] . '"'; + } + + $test_str = "" . $test_str . ""; + + // Short-cut through all the multiline code + if ($check_linenumbers) { + // strreplace to put close span and open span around multiline newlines + $test_str = str_replace( + "\n", "\n", + str_replace("\n ", "\n ", $test_str) + ); + } + } + + $i += $comment['length'] - 1; + + // parse the rest + $result .= $this->parse_non_string_part($stuff_to_parse); + $stuff_to_parse = ''; + } + + // If we haven't matched a regexp comment, try multi-line comments + if (!$COMMENT_MATCHED) { + // Is this a multiline comment? + if (!empty($this->language_data['COMMENT_MULTI']) && $next_comment_multi_pos < $i) { + $next_comment_multi_pos = $length; + foreach ($this->language_data['COMMENT_MULTI'] as $open => $close) { + $match_i = false; + if (isset($comment_multi_cache_per_key[$open]) && + ($comment_multi_cache_per_key[$open] >= $i || + $comment_multi_cache_per_key[$open] === false)) { + // we have already matched something + if ($comment_multi_cache_per_key[$open] === false) { + // this comment is never matched + continue; + } + $match_i = $comment_multi_cache_per_key[$open]; + } else if (($match_i = stripos($part, $open, $i)) !== false) { + $comment_multi_cache_per_key[$open] = $match_i; + } else { + $comment_multi_cache_per_key[$open] = false; + continue; + } + if ($match_i !== false && $match_i < $next_comment_multi_pos) { + $next_comment_multi_pos = $match_i; + $next_open_comment_multi = $open; + if ($match_i === $i) { + break; + } + } + } + } + if ($i == $next_comment_multi_pos) { + $open = $next_open_comment_multi; + $close = $this->language_data['COMMENT_MULTI'][$open]; + $open_strlen = strlen($open); + $close_strlen = strlen($close); + $COMMENT_MATCHED = true; + $test_str_match = $open; + //@todo If remove important do remove here + if ($this->lexic_permissions['COMMENTS']['MULTI'] || + $open == GESHI_START_IMPORTANT) { + if ($open != GESHI_START_IMPORTANT) { + if (!$this->use_classes) { + $attributes = ' style="' . $this->language_data['STYLES']['COMMENTS']['MULTI'] . '"'; + } else { + $attributes = ' class="coMULTI"'; + } + $test_str = "" . $this->hsc($open); + } else { + if (!$this->use_classes) { + $attributes = ' style="' . $this->important_styles . '"'; + } else { + $attributes = ' class="imp"'; + } + + // We don't include the start of the comment if it's an + // "important" part + $test_str = ""; + } + } else { + $test_str = $this->hsc($open); + } + + $close_pos = strpos( $part, $close, $i + $open_strlen ); + + if ($close_pos === false) { + $close_pos = $length; + } + + // Short-cut through all the multiline code + $rest_of_comment = $this->hsc(substr($part, $i + $open_strlen, $close_pos - $i - $open_strlen + $close_strlen)); + if (($this->lexic_permissions['COMMENTS']['MULTI'] || + $test_str_match == GESHI_START_IMPORTANT) && + $check_linenumbers) { + + // strreplace to put close span and open span around multiline newlines + $test_str .= str_replace( + "\n", "\n", + str_replace("\n ", "\n ", $rest_of_comment) + ); + } else { + $test_str .= $rest_of_comment; + } + + if ($this->lexic_permissions['COMMENTS']['MULTI'] || + $test_str_match == GESHI_START_IMPORTANT) { + $test_str .= ''; + } + + $i = $close_pos + $close_strlen - 1; + + // parse the rest + $result .= $this->parse_non_string_part($stuff_to_parse); + $stuff_to_parse = ''; + } + } + + // If we haven't matched a multiline comment, try single-line comments + if (!$COMMENT_MATCHED) { + // cache potential single line comment occurances + if (!empty($this->language_data['COMMENT_SINGLE']) && $next_comment_single_pos < $i) { + $next_comment_single_pos = $length; + foreach ($this->language_data['COMMENT_SINGLE'] as $comment_key => $comment_mark) { + $match_i = false; + if (isset($comment_single_cache_per_key[$comment_key]) && + ($comment_single_cache_per_key[$comment_key] >= $i || + $comment_single_cache_per_key[$comment_key] === false)) { + // we have already matched something + if ($comment_single_cache_per_key[$comment_key] === false) { + // this comment is never matched + continue; + } + $match_i = $comment_single_cache_per_key[$comment_key]; + } else if ( + // case sensitive comments + ($this->language_data['CASE_SENSITIVE'][GESHI_COMMENTS] && + ($match_i = stripos($part, $comment_mark, $i)) !== false) || + // non case sensitive + (!$this->language_data['CASE_SENSITIVE'][GESHI_COMMENTS] && + (($match_i = strpos($part, $comment_mark, $i)) !== false))) { + $comment_single_cache_per_key[$comment_key] = $match_i; + } else { + $comment_single_cache_per_key[$comment_key] = false; + continue; + } + if ($match_i !== false && $match_i < $next_comment_single_pos) { + $next_comment_single_pos = $match_i; + $next_comment_single_key = $comment_key; + if ($match_i === $i) { + break; + } + } + } + } + if ($next_comment_single_pos == $i) { + $comment_key = $next_comment_single_key; + $comment_mark = $this->language_data['COMMENT_SINGLE'][$comment_key]; + $com_len = strlen($comment_mark); + + // This check will find special variables like $# in bash + // or compiler directives of Delphi beginning {$ + if ((empty($sc_disallowed_before) || ($i == 0) || + (false === strpos($sc_disallowed_before, $part[$i-1]))) && + (empty($sc_disallowed_after) || ($length <= $i + $com_len) || + (false === strpos($sc_disallowed_after, $part[$i + $com_len])))) + { + // this is a valid comment + $COMMENT_MATCHED = true; + if ($this->lexic_permissions['COMMENTS'][$comment_key]) { + if (!$this->use_classes) { + $attributes = ' style="' . $this->language_data['STYLES']['COMMENTS'][$comment_key] . '"'; + } else { + $attributes = ' class="co' . $comment_key . '"'; + } + $test_str = "" . $this->hsc($this->change_case($comment_mark)); + } else { + $test_str = $this->hsc($comment_mark); + } + + //Check if this comment is the last in the source + $close_pos = strpos($part, "\n", $i); + $oops = false; + if ($close_pos === false) { + $close_pos = $length; + $oops = true; + } + $test_str .= $this->hsc(substr($part, $i + $com_len, $close_pos - $i - $com_len)); + if ($this->lexic_permissions['COMMENTS'][$comment_key]) { + $test_str .= ""; + } + + // Take into account that the comment might be the last in the source + if (!$oops) { + $test_str .= "\n"; + } + + $i = $close_pos; + + // parse the rest + $result .= $this->parse_non_string_part($stuff_to_parse); + $stuff_to_parse = ''; + } + } + } + } + + // Where are we adding this char? + if (!$COMMENT_MATCHED) { + $stuff_to_parse .= $char; + } else { + $result .= $test_str; + unset($test_str); + $COMMENT_MATCHED = false; + } + } + // Parse the last bit + $result .= $this->parse_non_string_part($stuff_to_parse); + $stuff_to_parse = ''; + } else { + $result .= $this->hsc($part); + } + // Close the that surrounds the block + if ($STRICTATTRS != '') { + $result = str_replace("\n", "\n", $result); + $result .= ''; + } + + $endresult .= $result; + unset($part, $parts[$key], $result); + } + + //This fix is related to SF#1923020, but has to be applied regardless of + //actually highlighting symbols. + /** NOTE: memorypeak #3 */ + $endresult = str_replace(array('', ''), array(';', '|'), $endresult); + +// // Parse the last stuff (redundant?) +// $result .= $this->parse_non_string_part($stuff_to_parse); + + // Lop off the very first and last spaces +// $result = substr($result, 1, -1); + + // We're finished: stop timing + $this->set_time($start_time, microtime()); + + $this->finalise($endresult); + return $endresult; + } + + /** + * Swaps out spaces and tabs for HTML indentation. Not needed if + * the code is in a pre block... + * + * @param string The source to indent (reference!) + * @since 1.0.0 + * @access private + */ + function indent(&$result) { + /// Replace tabs with the correct number of spaces + if (false !== strpos($result, "\t")) { + $lines = explode("\n", $result); + $result = null;//Save memory while we process the lines individually + $tab_width = $this->get_real_tab_width(); + $tab_string = ' ' . str_repeat(' ', $tab_width); + + for ($key = 0, $n = count($lines); $key < $n; $key++) { + $line = $lines[$key]; + if (false === strpos($line, "\t")) { + continue; + } + + $pos = 0; + $length = strlen($line); + $lines[$key] = ''; // reduce memory + + $IN_TAG = false; + for ($i = 0; $i < $length; ++$i) { + $char = $line[$i]; + // Simple engine to work out whether we're in a tag. + // If we are we modify $pos. This is so we ignore HTML + // in the line and only workout the tab replacement + // via the actual content of the string + // This test could be improved to include strings in the + // html so that < or > would be allowed in user's styles + // (e.g. quotes: '<' '>'; or similar) + if ($IN_TAG) { + if ('>' == $char) { + $IN_TAG = false; + } + $lines[$key] .= $char; + } else if ('<' == $char) { + $IN_TAG = true; + $lines[$key] .= '<'; + } else if ('&' == $char) { + $substr = substr($line, $i + 3, 5); + $posi = strpos($substr, ';'); + if (false === $posi) { + ++$pos; + } else { + $pos -= $posi+2; + } + $lines[$key] .= $char; + } else if ("\t" == $char) { + $str = ''; + // OPTIMISE - move $strs out. Make an array: + // $tabs = array( + // 1 => ' ', + // 2 => '  ', + // 3 => '   ' etc etc + // to use instead of building a string every time + $tab_end_width = $tab_width - ($pos % $tab_width); //Moved out of the look as it doesn't change within the loop + if (($pos & 1) || 1 == $tab_end_width) { + $str .= substr($tab_string, 6, $tab_end_width); + } else { + $str .= substr($tab_string, 0, $tab_end_width+5); + } + $lines[$key] .= $str; + $pos += $tab_end_width; + + if (false === strpos($line, "\t", $i + 1)) { + $lines[$key] .= substr($line, $i + 1); + break; + } + } else if (0 == $pos && ' ' == $char) { + $lines[$key] .= ' '; + ++$pos; + } else { + $lines[$key] .= $char; + ++$pos; + } + } + } + $result = implode("\n", $lines); + unset($lines);//We don't need the lines separated beyond this --- free them! + } + // Other whitespace + // BenBE: Fix to reduce the number of replacements to be done + $result = preg_replace('/^ /m', ' ', $result); + $result = str_replace(' ', '  ', $result); + + if ($this->line_numbers == GESHI_NO_LINE_NUMBERS && $this->header_type != GESHI_HEADER_PRE_TABLE) { + if ($this->line_ending === null) { + $result = nl2br($result); + } else { + $result = str_replace("\n", $this->line_ending, $result); + } + } + } + + /** + * Changes the case of a keyword for those languages where a change is asked for + * + * @param string The keyword to change the case of + * @return string The keyword with its case changed + * @since 1.0.0 + * @access private + */ + function change_case($instr) { + switch ($this->language_data['CASE_KEYWORDS']) { + case GESHI_CAPS_UPPER: + return strtoupper($instr); + case GESHI_CAPS_LOWER: + return strtolower($instr); + default: + return $instr; + } + } + + /** + * Handles replacements of keywords to include markup and links if requested + * + * @param string The keyword to add the Markup to + * @return The HTML for the match found + * @since 1.0.8 + * @access private + * + * @todo Get rid of ender in keyword links + */ + function handle_keyword_replace($match) { + $k = $this->_kw_replace_group; + $keyword = $match[0]; + + $before = ''; + $after = ''; + + if ($this->keyword_links) { + // Keyword links have been ebabled + + if (isset($this->language_data['URLS'][$k]) && + $this->language_data['URLS'][$k] != '') { + // There is a base group for this keyword + + // Old system: strtolower + //$keyword = ( $this->language_data['CASE_SENSITIVE'][$group] ) ? $keyword : strtolower($keyword); + // New system: get keyword from language file to get correct case + if (!$this->language_data['CASE_SENSITIVE'][$k] && + strpos($this->language_data['URLS'][$k], '{FNAME}') !== false) { + foreach ($this->language_data['KEYWORDS'][$k] as $word) { + if (strcasecmp($word, $keyword) == 0) { + break; + } + } + } else { + $word = $keyword; + } + + $before = '<|UR1|"' . + str_replace( + array( + '{FNAME}', + '{FNAMEL}', + '{FNAMEU}', + '.'), + array( + str_replace('+', '%20', urlencode($this->hsc($word))), + str_replace('+', '%20', urlencode($this->hsc(strtolower($word)))), + str_replace('+', '%20', urlencode($this->hsc(strtoupper($word)))), + ''), + $this->language_data['URLS'][$k] + ) . '">'; + $after = ''; + } + } + + return $before . '<|/'. $k .'/>' . $this->change_case($keyword) . '|>' . $after; + } + + /** + * handles regular expressions highlighting-definitions with callback functions + * + * @note this is a callback, don't use it directly + * + * @param array the matches array + * @return The highlighted string + * @since 1.0.8 + * @access private + */ + function handle_regexps_callback($matches) { + // before: "' style=\"' . call_user_func(\"$func\", '\\1') . '\"\\1|>'", + return ' style="' . call_user_func($this->language_data['STYLES']['REGEXPS'][$this->_rx_key], $matches[1]) . '"'. $matches[1] . '|>'; + } + + /** + * handles newlines in REGEXPS matches. Set the _hmr_* vars before calling this + * + * @note this is a callback, don't use it directly + * + * @param array the matches array + * @return string + * @since 1.0.8 + * @access private + */ + function handle_multiline_regexps($matches) { + $before = $this->_hmr_before; + $after = $this->_hmr_after; + if ($this->_hmr_replace) { + $replace = $this->_hmr_replace; + $search = array(); + + foreach (array_keys($matches) as $k) { + $search[] = '\\' . $k; + } + + $before = str_replace($search, $matches, $before); + $after = str_replace($search, $matches, $after); + $replace = str_replace($search, $matches, $replace); + } else { + $replace = $matches[0]; + } + return $before + . '<|!REG3XP' . $this->_hmr_key .'!>' + . str_replace("\n", "|>\n<|!REG3XP" . $this->_hmr_key . '!>', $replace) + . '|>' + . $after; + } + + /** + * Takes a string that has no strings or comments in it, and highlights + * stuff like keywords, numbers and methods. + * + * @param string The string to parse for keyword, numbers etc. + * @since 1.0.0 + * @access private + * @todo BUGGY! Why? Why not build string and return? + */ + function parse_non_string_part($stuff_to_parse) { + $stuff_to_parse = ' ' . $this->hsc($stuff_to_parse); + + // Highlight keywords + $disallowed_before = "(?|^&"; + $disallowed_after = "(?![a-zA-Z0-9_\|%\\-&;"; + if ($this->lexic_permissions['STRINGS']) { + $quotemarks = preg_quote(implode($this->language_data['QUOTEMARKS']), '/'); + $disallowed_before .= $quotemarks; + $disallowed_after .= $quotemarks; + } + $disallowed_before .= "])"; + $disallowed_after .= "])"; + + $parser_control_pergroup = false; + if (isset($this->language_data['PARSER_CONTROL'])) { + if (isset($this->language_data['PARSER_CONTROL']['KEYWORDS'])) { + $x = 0; // check wether per-keyword-group parser_control is enabled + if (isset($this->language_data['PARSER_CONTROL']['KEYWORDS']['DISALLOWED_BEFORE'])) { + $disallowed_before = $this->language_data['PARSER_CONTROL']['KEYWORDS']['DISALLOWED_BEFORE']; + ++$x; + } + if (isset($this->language_data['PARSER_CONTROL']['KEYWORDS']['DISALLOWED_AFTER'])) { + $disallowed_after = $this->language_data['PARSER_CONTROL']['KEYWORDS']['DISALLOWED_AFTER']; + ++$x; + } + $parser_control_pergroup = (count($this->language_data['PARSER_CONTROL']['KEYWORDS']) - $x) > 0; + } + } + + foreach (array_keys($this->language_data['KEYWORDS']) as $k) { + if (!isset($this->lexic_permissions['KEYWORDS'][$k]) || + $this->lexic_permissions['KEYWORDS'][$k]) { + + $case_sensitive = $this->language_data['CASE_SENSITIVE'][$k]; + $modifiers = $case_sensitive ? '' : 'i'; + + // NEW in 1.0.8 - per-keyword-group parser control + $disallowed_before_local = $disallowed_before; + $disallowed_after_local = $disallowed_after; + if ($parser_control_pergroup && isset($this->language_data['PARSER_CONTROL']['KEYWORDS'][$k])) { + if (isset($this->language_data['PARSER_CONTROL']['KEYWORDS'][$k]['DISALLOWED_BEFORE'])) { + $disallowed_before_local = + $this->language_data['PARSER_CONTROL']['KEYWORDS'][$k]['DISALLOWED_BEFORE']; + } + + if (isset($this->language_data['PARSER_CONTROL']['KEYWORDS'][$k]['DISALLOWED_AFTER'])) { + $disallowed_after_local = + $this->language_data['PARSER_CONTROL']['KEYWORDS'][$k]['DISALLOWED_AFTER']; + } + } + + $this->_kw_replace_group = $k; + + //NEW in 1.0.8, the cached regexp list + // since we don't want PHP / PCRE to crash due to too large patterns we split them into smaller chunks + for ($set = 0, $set_length = count($this->language_data['CACHED_KEYWORD_LISTS'][$k]); $set < $set_length; ++$set) { + $keywordset =& $this->language_data['CACHED_KEYWORD_LISTS'][$k][$set]; + // Might make a more unique string for putting the number in soon + // Basically, we don't put the styles in yet because then the styles themselves will + // get highlighted if the language has a CSS keyword in it (like CSS, for example ;)) + $stuff_to_parse = preg_replace_callback( + "/$disallowed_before_local({$keywordset})(?!\(?:htm|php))$disallowed_after_local/$modifiers", + array($this, 'handle_keyword_replace'), + $stuff_to_parse + ); + } + } + } + + // Regular expressions + foreach ($this->language_data['REGEXPS'] as $key => $regexp) { + if ($this->lexic_permissions['REGEXPS'][$key]) { + if (is_array($regexp)) { + if ($this->line_numbers != GESHI_NO_LINE_NUMBERS) { + // produce valid HTML when we match multiple lines + $this->_hmr_replace = $regexp[GESHI_REPLACE]; + $this->_hmr_before = $regexp[GESHI_BEFORE]; + $this->_hmr_key = $key; + $this->_hmr_after = $regexp[GESHI_AFTER]; + $stuff_to_parse = preg_replace_callback( + "/" . $regexp[GESHI_SEARCH] . "/{$regexp[GESHI_MODIFIERS]}", + array($this, 'handle_multiline_regexps'), + $stuff_to_parse); + $this->_hmr_replace = false; + $this->_hmr_before = ''; + $this->_hmr_after = ''; + } else { + $stuff_to_parse = preg_replace( + '/' . $regexp[GESHI_SEARCH] . '/' . $regexp[GESHI_MODIFIERS], + $regexp[GESHI_BEFORE] . '<|!REG3XP'. $key .'!>' . $regexp[GESHI_REPLACE] . '|>' . $regexp[GESHI_AFTER], + $stuff_to_parse); + } + } else { + if ($this->line_numbers != GESHI_NO_LINE_NUMBERS) { + // produce valid HTML when we match multiple lines + $this->_hmr_key = $key; + $stuff_to_parse = preg_replace_callback( "/(" . $regexp . ")/", + array($this, 'handle_multiline_regexps'), $stuff_to_parse); + $this->_hmr_key = ''; + } else { + $stuff_to_parse = preg_replace( "/(" . $regexp . ")/", "<|!REG3XP$key!>\\1|>", $stuff_to_parse); + } + } + } + } + + // Highlight numbers. As of 1.0.8 we support different types of numbers + $numbers_found = false; + if ($this->lexic_permissions['NUMBERS'] && preg_match('#\d#', $stuff_to_parse )) { + $numbers_found = true; + + //For each of the formats ... + foreach($this->language_data['NUMBERS_RXCACHE'] as $id => $regexp) { + //Check if it should be highlighted ... + $stuff_to_parse = preg_replace($regexp, "<|/NUM!$id/>\\1|>", $stuff_to_parse); + } + } + + // + // Now that's all done, replace /[number]/ with the correct styles + // + foreach (array_keys($this->language_data['KEYWORDS']) as $k) { + if (!$this->use_classes) { + $attributes = ' style="' . + (isset($this->language_data['STYLES']['KEYWORDS'][$k]) ? + $this->language_data['STYLES']['KEYWORDS'][$k] : "") . '"'; + } else { + $attributes = ' class="kw' . $k . '"'; + } + $stuff_to_parse = str_replace("<|/$k/>", "<|$attributes>", $stuff_to_parse); + } + + if ($numbers_found) { + // Put number styles in + foreach($this->language_data['NUMBERS_RXCACHE'] as $id => $regexp) { + //Commented out for now, as this needs some review ... + // if ($numbers_permissions & $id) { + //Get the appropriate style ... + //Checking for unset styles is done by the style cache builder ... + if (!$this->use_classes) { + $attributes = ' style="' . $this->language_data['STYLES']['NUMBERS'][$id] . '"'; + } else { + $attributes = ' class="nu'.$id.'"'; + } + + //Set in the correct styles ... + $stuff_to_parse = str_replace("/NUM!$id/", $attributes, $stuff_to_parse); + // } + } + } + + // Highlight methods and fields in objects + if ($this->lexic_permissions['METHODS'] && $this->language_data['OOLANG']) { + $oolang_spaces = "[\s]*"; + $oolang_before = ""; + $oolang_after = "[a-zA-Z][a-zA-Z0-9_]*"; + if (isset($this->language_data['PARSER_CONTROL'])) { + if (isset($this->language_data['PARSER_CONTROL']['OOLANG'])) { + if (isset($this->language_data['PARSER_CONTROL']['OOLANG']['MATCH_BEFORE'])) { + $oolang_before = $this->language_data['PARSER_CONTROL']['OOLANG']['MATCH_BEFORE']; + } + if (isset($this->language_data['PARSER_CONTROL']['OOLANG']['MATCH_AFTER'])) { + $oolang_after = $this->language_data['PARSER_CONTROL']['OOLANG']['MATCH_AFTER']; + } + if (isset($this->language_data['PARSER_CONTROL']['OOLANG']['MATCH_SPACES'])) { + $oolang_spaces = $this->language_data['PARSER_CONTROL']['OOLANG']['MATCH_SPACES']; + } + } + } + + foreach ($this->language_data['OBJECT_SPLITTERS'] as $key => $splitter) { + if (false !== strpos($stuff_to_parse, $splitter)) { + if (!$this->use_classes) { + $attributes = ' style="' . $this->language_data['STYLES']['METHODS'][$key] . '"'; + } else { + $attributes = ' class="me' . $key . '"'; + } + $stuff_to_parse = preg_replace("/($oolang_before)(" . preg_quote($this->language_data['OBJECT_SPLITTERS'][$key], '/') . ")($oolang_spaces)($oolang_after)/", "\\1\\2\\3<|$attributes>\\4|>", $stuff_to_parse); + } + } + } + + // + // Highlight brackets. Yes, I've tried adding a semi-colon to this list. + // You try it, and see what happens ;) + // TODO: Fix lexic permissions not converting entities if shouldn't + // be highlighting regardless + // + if ($this->lexic_permissions['BRACKETS']) { + $stuff_to_parse = str_replace( $this->language_data['CACHE_BRACKET_MATCH'], + $this->language_data['CACHE_BRACKET_REPLACE'], $stuff_to_parse ); + } + + + //FIX for symbol highlighting ... + if ($this->lexic_permissions['SYMBOLS'] && !empty($this->language_data['SYMBOLS'])) { + //Get all matches and throw away those witin a block that is already highlighted... (i.e. matched by a regexp) + $n_symbols = preg_match_all("/<\|(?:|[^>])+>(?:(?!\|>).*?)\|>|<\/a>|(?:" . $this->language_data['SYMBOL_SEARCH'] . ")+(?![^<]+?>)/", $stuff_to_parse, $pot_symbols, PREG_OFFSET_CAPTURE | PREG_SET_ORDER); + $global_offset = 0; + for ($s_id = 0; $s_id < $n_symbols; ++$s_id) { + $symbol_match = $pot_symbols[$s_id][0][0]; + if (strpos($symbol_match, '<') !== false || strpos($symbol_match, '>') !== false) { + // already highlighted blocks _must_ include either < or > + // so if this conditional applies, we have to skip this match + // BenBE: UNLESS the block contains or + if(strpos($symbol_match, '') === false && + strpos($symbol_match, '') === false) { + continue; + } + } + + // if we reach this point, we have a valid match which needs to be highlighted + + $symbol_length = strlen($symbol_match); + $symbol_offset = $pot_symbols[$s_id][0][1]; + unset($pot_symbols[$s_id]); + $symbol_end = $symbol_length + $symbol_offset; + $symbol_hl = ""; + + // if we have multiple styles, we have to handle them properly + if ($this->language_data['MULTIPLE_SYMBOL_GROUPS']) { + $old_sym = -1; + // Split the current stuff to replace into its atomic symbols ... + preg_match_all("/" . $this->language_data['SYMBOL_SEARCH'] . "/", $symbol_match, $sym_match_syms, PREG_PATTERN_ORDER); + foreach ($sym_match_syms[0] as $sym_ms) { + //Check if consequtive symbols belong to the same group to save output ... + if (isset($this->language_data['SYMBOL_DATA'][$sym_ms]) + && ($this->language_data['SYMBOL_DATA'][$sym_ms] != $old_sym)) { + if (-1 != $old_sym) { + $symbol_hl .= "|>"; + } + $old_sym = $this->language_data['SYMBOL_DATA'][$sym_ms]; + if (!$this->use_classes) { + $symbol_hl .= '<| style="' . $this->language_data['STYLES']['SYMBOLS'][$old_sym] . '">'; + } else { + $symbol_hl .= '<| class="sy' . $old_sym . '">'; + } + } + $symbol_hl .= $sym_ms; + } + unset($sym_match_syms); + + //Close remaining tags and insert the replacement at the right position ... + //Take caution if symbol_hl is empty to avoid doubled closing spans. + if (-1 != $old_sym) { + $symbol_hl .= "|>"; + } + } else { + if (!$this->use_classes) { + $symbol_hl = '<| style="' . $this->language_data['STYLES']['SYMBOLS'][0] . '">'; + } else { + $symbol_hl = '<| class="sy0">'; + } + $symbol_hl .= $symbol_match . '|>'; + } + + $stuff_to_parse = substr_replace($stuff_to_parse, $symbol_hl, $symbol_offset + $global_offset, $symbol_length); + + // since we replace old text with something of different size, + // we'll have to keep track of the differences + $global_offset += strlen($symbol_hl) - $symbol_length; + } + } + //FIX for symbol highlighting ... + + // Add class/style for regexps + foreach (array_keys($this->language_data['REGEXPS']) as $key) { + if ($this->lexic_permissions['REGEXPS'][$key]) { + if (is_callable($this->language_data['STYLES']['REGEXPS'][$key])) { + $this->_rx_key = $key; + $stuff_to_parse = preg_replace_callback("/!REG3XP$key!(.*)\|>/U", + array($this, 'handle_regexps_callback'), + $stuff_to_parse); + } else { + if (!$this->use_classes) { + $attributes = ' style="' . $this->language_data['STYLES']['REGEXPS'][$key] . '"'; + } else { + if (is_array($this->language_data['REGEXPS'][$key]) && + array_key_exists(GESHI_CLASS, $this->language_data['REGEXPS'][$key])) { + $attributes = ' class="' . + $this->language_data['REGEXPS'][$key][GESHI_CLASS] . '"'; + } else { + $attributes = ' class="re' . $key . '"'; + } + } + $stuff_to_parse = str_replace("!REG3XP$key!", "$attributes", $stuff_to_parse); + } + } + } + + // Replace with . for urls + $stuff_to_parse = str_replace('', '.', $stuff_to_parse); + // Replace <|UR1| with link_styles[GESHI_LINK])) { + if ($this->use_classes) { + $stuff_to_parse = str_replace('<|UR1|', 'link_target . ' href=', $stuff_to_parse); + } else { + $stuff_to_parse = str_replace('<|UR1|', 'link_target . ' style="' . $this->link_styles[GESHI_LINK] . '" href=', $stuff_to_parse); + } + } else { + $stuff_to_parse = str_replace('<|UR1|', 'link_target . ' href=', $stuff_to_parse); + } + + // + // NOW we add the span thingy ;) + // + + $stuff_to_parse = str_replace('<|', '', '', $stuff_to_parse ); + return substr($stuff_to_parse, 1); + } + + /** + * Sets the time taken to parse the code + * + * @param microtime The time when parsing started + * @param microtime The time when parsing ended + * @since 1.0.2 + * @access private + */ + function set_time($start_time, $end_time) { + $start = explode(' ', $start_time); + $end = explode(' ', $end_time); + $this->time = $end[0] + $end[1] - $start[0] - $start[1]; + } + + /** + * Gets the time taken to parse the code + * + * @return double The time taken to parse the code + * @since 1.0.2 + */ + function get_time() { + return $this->time; + } + + /** + * Merges arrays recursively, overwriting values of the first array with values of later arrays + * + * @since 1.0.8 + * @access private + */ + function merge_arrays() { + $arrays = func_get_args(); + $narrays = count($arrays); + + // check arguments + // comment out if more performance is necessary (in this case the foreach loop will trigger a warning if the argument is not an array) + for ($i = 0; $i < $narrays; $i ++) { + if (!is_array($arrays[$i])) { + // also array_merge_recursive returns nothing in this case + trigger_error('Argument #' . ($i+1) . ' is not an array - trying to merge array with scalar! Returning false!', E_USER_WARNING); + return false; + } + } + + // the first array is in the output set in every case + $ret = $arrays[0]; + + // merege $ret with the remaining arrays + for ($i = 1; $i < $narrays; $i ++) { + foreach ($arrays[$i] as $key => $value) { + if (is_array($value) && isset($ret[$key])) { + // if $ret[$key] is not an array you try to merge an scalar value with an array - the result is not defined (incompatible arrays) + // in this case the call will trigger an E_USER_WARNING and the $ret[$key] will be false. + $ret[$key] = $this->merge_arrays($ret[$key], $value); + } else { + $ret[$key] = $value; + } + } + } + + return $ret; + } + + /** + * Gets language information and stores it for later use + * + * @param string The filename of the language file you want to load + * @since 1.0.0 + * @access private + * @todo Needs to load keys for lexic permissions for keywords, regexps etc + */ + function load_language($file_name) { + if ($file_name == $this->loaded_language) { + // this file is already loaded! + return; + } + + //Prepare some stuff before actually loading the language file + $this->loaded_language = $file_name; + $this->parse_cache_built = false; + $this->enable_highlighting(); + $language_data = array(); + + //Load the language file + require $file_name; + + // Perhaps some checking might be added here later to check that + // $language data is a valid thing but maybe not + $this->language_data = $language_data; + + // Set strict mode if should be set + $this->strict_mode = $this->language_data['STRICT_MODE_APPLIES']; + + // Set permissions for all lexics to true + // so they'll be highlighted by default + foreach (array_keys($this->language_data['KEYWORDS']) as $key) { + if (!empty($this->language_data['KEYWORDS'][$key])) { + $this->lexic_permissions['KEYWORDS'][$key] = true; + } else { + $this->lexic_permissions['KEYWORDS'][$key] = false; + } + } + + foreach (array_keys($this->language_data['COMMENT_SINGLE']) as $key) { + $this->lexic_permissions['COMMENTS'][$key] = true; + } + foreach (array_keys($this->language_data['REGEXPS']) as $key) { + $this->lexic_permissions['REGEXPS'][$key] = true; + } + + // for BenBE and future code reviews: + // we can use empty here since we only check for existance and emptiness of an array + // if it is not an array at all but rather false or null this will work as intended as well + // even if $this->language_data['PARSER_CONTROL'] is undefined this won't trigger a notice + if (!empty($this->language_data['PARSER_CONTROL']['ENABLE_FLAGS'])) { + foreach ($this->language_data['PARSER_CONTROL']['ENABLE_FLAGS'] as $flag => $value) { + // it's either true or false and maybe is true as well + $perm = $value !== GESHI_NEVER; + if ($flag == 'ALL') { + $this->enable_highlighting($perm); + continue; + } + if (!isset($this->lexic_permissions[$flag])) { + // unknown lexic permission + continue; + } + if (is_array($this->lexic_permissions[$flag])) { + foreach ($this->lexic_permissions[$flag] as $key => $val) { + $this->lexic_permissions[$flag][$key] = $perm; + } + } else { + $this->lexic_permissions[$flag] = $perm; + } + } + unset($this->language_data['PARSER_CONTROL']['ENABLE_FLAGS']); + } + + //Fix: Problem where hardescapes weren't handled if no ESCAPE_CHAR was given + //You need to set one for HARDESCAPES only in this case. + if(!isset($this->language_data['HARDCHAR'])) { + $this->language_data['HARDCHAR'] = $this->language_data['ESCAPE_CHAR']; + } + + //NEW in 1.0.8: Allow styles to be loaded from a separate file to override defaults + $style_filename = substr($file_name, 0, -4) . '.style.php'; + if (is_readable($style_filename)) { + //Clear any style_data that could have been set before ... + if (isset($style_data)) { + unset($style_data); + } + + //Read the Style Information from the style file + include $style_filename; + + //Apply the new styles to our current language styles + if (isset($style_data) && is_array($style_data)) { + $this->language_data['STYLES'] = + $this->merge_arrays($this->language_data['STYLES'], $style_data); + } + } + } + + /** + * Takes the parsed code and various options, and creates the HTML + * surrounding it to make it look nice. + * + * @param string The code already parsed (reference!) + * @since 1.0.0 + * @access private + */ + function finalise(&$parsed_code) { + // Remove end parts of important declarations + // This is BUGGY!! My fault for bad code: fix coming in 1.2 + // @todo Remove this crap + if ($this->enable_important_blocks && + (strpos($parsed_code, $this->hsc(GESHI_START_IMPORTANT)) === false)) { + $parsed_code = str_replace($this->hsc(GESHI_END_IMPORTANT), '', $parsed_code); + } + + // Add HTML whitespace stuff if we're using the
    header + if ($this->header_type != GESHI_HEADER_PRE && $this->header_type != GESHI_HEADER_PRE_VALID) { + $this->indent($parsed_code); + } + + // purge some unnecessary stuff + /** NOTE: memorypeak #1 */ + $parsed_code = preg_replace('#]+>(\s*)#', '\\1', $parsed_code); + + // If we are using IDs for line numbers, there needs to be an overall + // ID set to prevent collisions. + if ($this->add_ids && !$this->overall_id) { + $this->overall_id = 'geshi-' . substr(md5(microtime()), 0, 4); + } + + // Get code into lines + /** NOTE: memorypeak #2 */ + $code = explode("\n", $parsed_code); + $parsed_code = $this->header(); + + // If we're using line numbers, we insert
  • s and appropriate + // markup to style them (otherwise we don't need to do anything) + if ($this->line_numbers != GESHI_NO_LINE_NUMBERS && $this->header_type != GESHI_HEADER_PRE_TABLE) { + // If we're using the 
     header, we shouldn't add newlines because
+            // the 
     will line-break them (and the 
  • s already do this for us)
+            $ls = ($this->header_type != GESHI_HEADER_PRE && $this->header_type != GESHI_HEADER_PRE_VALID) ? "\n" : '';
+
+            // Set vars to defaults for following loop
+            $i = 0;
+
+            // Foreach line...
+            for ($i = 0, $n = count($code); $i < $n;) {
+                //Reset the attributes for a new line ...
+                $attrs = array();
+
+                // Make lines have at least one space in them if they're empty
+                // BenBE: Checking emptiness using trim instead of relying on blanks
+                if ('' == trim($code[$i])) {
+                    $code[$i] = ' ';
+                }
+
+                // If this is a "special line"...
+                if ($this->line_numbers == GESHI_FANCY_LINE_NUMBERS &&
+                    $i % $this->line_nth_row == ($this->line_nth_row - 1)) {
+                    // Set the attributes to style the line
+                    if ($this->use_classes) {
+                        //$attr = ' class="li2"';
+                        $attrs['class'][] = 'li2';
+                        $def_attr = ' class="de2"';
+                    } else {
+                        //$attr = ' style="' . $this->line_style2 . '"';
+                        $attrs['style'][] = $this->line_style2;
+                        // This style "covers up" the special styles set for special lines
+                        // so that styles applied to special lines don't apply to the actual
+                        // code on that line
+                        $def_attr = ' style="' . $this->code_style . '"';
+                    }
+                } else {
+                    if ($this->use_classes) {
+                        //$attr = ' class="li1"';
+                        $attrs['class'][] = 'li1';
+                        $def_attr = ' class="de1"';
+                    } else {
+                        //$attr = ' style="' . $this->line_style1 . '"';
+                        $attrs['style'][] = $this->line_style1;
+                        $def_attr = ' style="' . $this->code_style . '"';
+                    }
+                }
+
+                //Check which type of tag to insert for this line
+                if ($this->header_type == GESHI_HEADER_PRE_VALID) {
+                    $start = "";
+                    $end = '
    • ';
+                } else {
+                    // Span or div?
+                    $start = "";
+                    $end = '';
+                }
+
+                ++$i;
+
+                // Are we supposed to use ids? If so, add them
+                if ($this->add_ids) {
+                    $attrs['id'][] = "$this->overall_id-$i";
+                }
+
+                //Is this some line with extra styles???
+                if (in_array($i, $this->highlight_extra_lines)) {
+                    if ($this->use_classes) {
+                        if (isset($this->highlight_extra_lines_styles[$i])) {
+                            $attrs['class'][] = "lx$i";
+                        } else {
+                            $attrs['class'][] = "ln-xtra";
+                        }
+                    } else {
+                        array_push($attrs['style'], $this->get_line_style($i));
+                    }
+                }
+
+                // Add in the line surrounded by appropriate list HTML
+                $attr_string = '';
+                foreach ($attrs as $key => $attr) {
+                    $attr_string .= ' ' . $key . '="' . implode(' ', $attr) . '"';
+                }
+
+                $parsed_code .= "$start{$code[$i-1]}$end
    • $ls"; + unset($code[$i - 1]); + } + } else { + $n = count($code); + if ($this->use_classes) { + $attributes = ' class="de1"'; + } else { + $attributes = ' style="'. $this->code_style .'"'; + } + if ($this->header_type == GESHI_HEADER_PRE_VALID) { + $parsed_code .= ''; + } elseif ($this->header_type == GESHI_HEADER_PRE_TABLE) { + if ($this->line_numbers != GESHI_NO_LINE_NUMBERS) { + if ($this->use_classes) { + $attrs = ' class="ln"'; + } else { + $attrs = ' style="'. $this->table_linenumber_style .'"'; + } + $parsed_code .= ''; + // get linenumbers + // we don't merge it with the for below, since it should be better for + // memory consumption this way + // @todo: but... actually it would still be somewhat nice to merge the two loops + // the mem peaks are at different positions + for ($i = 0; $i < $n; ++$i) { + $close = 0; + // fancy lines + if ($this->line_numbers == GESHI_FANCY_LINE_NUMBERS && + $i % $this->line_nth_row == ($this->line_nth_row - 1)) { + // Set the attributes to style the line + if ($this->use_classes) { + $parsed_code .= ''; + } else { + // This style "covers up" the special styles set for special lines + // so that styles applied to special lines don't apply to the actual + // code on that line + $parsed_code .= '' + .''; + } + $close += 2; + } + //Is this some line with extra styles??? + if (in_array($i + 1, $this->highlight_extra_lines)) { + if ($this->use_classes) { + if (isset($this->highlight_extra_lines_styles[$i])) { + $parsed_code .= ""; + } else { + $parsed_code .= ""; + } + } else { + $parsed_code .= "get_line_style($i) . "\">"; + } + ++$close; + } + $parsed_code .= $this->line_numbers_start + $i; + if ($close) { + $parsed_code .= str_repeat('', $close); + } else if ($i != $n) { + $parsed_code .= "\n"; + } + } + $parsed_code .= ''; + } + $parsed_code .= ''; + } + // No line numbers, but still need to handle highlighting lines extra. + // Have to use divs so the full width of the code is highlighted + $close = 0; + for ($i = 0; $i < $n; ++$i) { + // Make lines have at least one space in them if they're empty + // BenBE: Checking emptiness using trim instead of relying on blanks + if ('' == trim($code[$i])) { + $code[$i] = ' '; + } + // fancy lines + if ($this->line_numbers == GESHI_FANCY_LINE_NUMBERS && + $i % $this->line_nth_row == ($this->line_nth_row - 1)) { + // Set the attributes to style the line + if ($this->use_classes) { + $parsed_code .= ''; + } else { + // This style "covers up" the special styles set for special lines + // so that styles applied to special lines don't apply to the actual + // code on that line + $parsed_code .= '' + .''; + } + $close += 2; + } + //Is this some line with extra styles??? + if (in_array($i + 1, $this->highlight_extra_lines)) { + if ($this->use_classes) { + if (isset($this->highlight_extra_lines_styles[$i])) { + $parsed_code .= ""; + } else { + $parsed_code .= ""; + } + } else { + $parsed_code .= "get_line_style($i) . "\">"; + } + ++$close; + } + + $parsed_code .= $code[$i]; + + if ($close) { + $parsed_code .= str_repeat('', $close); + $close = 0; + } + elseif ($i + 1 < $n) { + $parsed_code .= "\n"; + } + unset($code[$i]); + } + + if ($this->header_type == GESHI_HEADER_PRE_VALID || $this->header_type == GESHI_HEADER_PRE_TABLE) { + $parsed_code .= ''; + } + if ($this->header_type == GESHI_HEADER_PRE_TABLE && $this->line_numbers != GESHI_NO_LINE_NUMBERS) { + $parsed_code .= ''; + } + } + + $parsed_code .= $this->footer(); + } + + /** + * Creates the header for the code block (with correct attributes) + * + * @return string The header for the code block + * @since 1.0.0 + * @access private + */ + function header() { + // Get attributes needed + /** + * @todo Document behaviour change - class is outputted regardless of whether + * we're using classes or not. Same with style + */ + $attributes = ' class="' . $this->_genCSSName($this->language); + if ($this->overall_class != '') { + $attributes .= " ".$this->_genCSSName($this->overall_class); + } + $attributes .= '"'; + + if ($this->overall_id != '') { + $attributes .= " id=\"{$this->overall_id}\""; + } + if ($this->overall_style != '' && !$this->use_classes) { + $attributes .= ' style="' . $this->overall_style . '"'; + } + + $ol_attributes = ''; + + if ($this->line_numbers_start != 1) { + $ol_attributes .= ' start="' . $this->line_numbers_start . '"'; + } + + // Get the header HTML + $header = $this->header_content; + if ($header) { + if ($this->header_type == GESHI_HEADER_PRE || $this->header_type == GESHI_HEADER_PRE_VALID) { + $header = str_replace("\n", '', $header); + } + $header = $this->replace_keywords($header); + + if ($this->use_classes) { + $attr = ' class="head"'; + } else { + $attr = " style=\"{$this->header_content_style}\""; + } + if ($this->header_type == GESHI_HEADER_PRE_TABLE && $this->line_numbers != GESHI_NO_LINE_NUMBERS) { + $header = "$header"; + } else { + $header = "$header"; + } + } + + if (GESHI_HEADER_NONE == $this->header_type) { + if ($this->line_numbers != GESHI_NO_LINE_NUMBERS) { + return "$header"; + } + return $header . ($this->force_code_block ? '
    ' : ''); + } + + // Work out what to return and do it + if ($this->line_numbers != GESHI_NO_LINE_NUMBERS) { + if ($this->header_type == GESHI_HEADER_PRE) { + return "$header"; + } else if ($this->header_type == GESHI_HEADER_DIV || + $this->header_type == GESHI_HEADER_PRE_VALID) { + return "$header"; + } else if ($this->header_type == GESHI_HEADER_PRE_TABLE) { + return "$header"; + } + } else { + if ($this->header_type == GESHI_HEADER_PRE) { + return "$header" . + ($this->force_code_block ? '
    ' : ''); + } else { + return "$header" . + ($this->force_code_block ? '
    ' : ''); + } + } + } + + /** + * Returns the footer for the code block. + * + * @return string The footer for the code block + * @since 1.0.0 + * @access private + */ + function footer() { + $footer = $this->footer_content; + if ($footer) { + if ($this->header_type == GESHI_HEADER_PRE) { + $footer = str_replace("\n", '', $footer);; + } + $footer = $this->replace_keywords($footer); + + if ($this->use_classes) { + $attr = ' class="foot"'; + } else { + $attr = " style=\"{$this->footer_content_style}\""; + } + if ($this->header_type == GESHI_HEADER_PRE_TABLE && $this->line_numbers != GESHI_NO_LINE_NUMBERS) { + $footer = "$footer"; + } else { + $footer = "$footer
    "; + } + } + + if (GESHI_HEADER_NONE == $this->header_type) { + return ($this->line_numbers != GESHI_NO_LINE_NUMBERS) ? '' . $footer : $footer; + } + + if ($this->header_type == GESHI_HEADER_DIV || $this->header_type == GESHI_HEADER_PRE_VALID) { + if ($this->line_numbers != GESHI_NO_LINE_NUMBERS) { + return "$footer
    "; + } + return ($this->force_code_block ? '
    ' : '') . + "$footer"; + } + elseif ($this->header_type == GESHI_HEADER_PRE_TABLE) { + if ($this->line_numbers != GESHI_NO_LINE_NUMBERS) { + return "$footer"; + } + return ($this->force_code_block ? '' : '') . + "$footer"; + } + else { + if ($this->line_numbers != GESHI_NO_LINE_NUMBERS) { + return "$footer"; + } + return ($this->force_code_block ? '' : '') . + "$footer"; + } + } + + /** + * Replaces certain keywords in the header and footer with + * certain configuration values + * + * @param string The header or footer content to do replacement on + * @return string The header or footer with replaced keywords + * @since 1.0.2 + * @access private + */ + function replace_keywords($instr) { + $keywords = $replacements = array(); + + $keywords[] = '