From f4fb1db458fab52d0493ead52c9ea7e01206eaa7 Mon Sep 17 00:00:00 2001 From: Joël Cox Date: Sun, 9 Oct 2011 18:39:39 +0200 Subject: Moved tutorial to new user guide directory. --- user_guide_src/source/tutorial/conclusion.html | 91 ++++++++ .../source/tutorial/create_news_items.html | 179 ++++++++++++++++ .../source/tutorial/hard_coded_pages.html | 158 ++++++++++++++ user_guide_src/source/tutorial/index.html | 101 +++++++++ user_guide_src/source/tutorial/news_section.html | 230 +++++++++++++++++++++ user_guide_src/source/tutorial/static_pages.html | 206 ++++++++++++++++++ 6 files changed, 965 insertions(+) create mode 100644 user_guide_src/source/tutorial/conclusion.html create mode 100644 user_guide_src/source/tutorial/create_news_items.html create mode 100644 user_guide_src/source/tutorial/hard_coded_pages.html create mode 100644 user_guide_src/source/tutorial/index.html create mode 100644 user_guide_src/source/tutorial/news_section.html create mode 100644 user_guide_src/source/tutorial/static_pages.html (limited to 'user_guide_src/source/tutorial') diff --git a/user_guide_src/source/tutorial/conclusion.html b/user_guide_src/source/tutorial/conclusion.html new file mode 100644 index 000000000..ccf89175f --- /dev/null +++ b/user_guide_src/source/tutorial/conclusion.html @@ -0,0 +1,91 @@ + + + + + +CodeIgniter Features : CodeIgniter User Guide + + + + + + + + + + + + + + + + + + + +

+ + + + + + + + + + +

+ + +
+ + + +

+ + +

Tutorial - Conclusion

+ +

This tutorial did not cover all of the things you might expect of a full-fledged content management system, but it introduced you to the more important topics of routing, writing controllers, and models. We hope this tutorial gave you an insight into some of CodeIgniter's basic design patterns, which you can expand upon.

+ +

Now that you've completed this tutorial, we recommend you check out the rest of the documentation. CodeIgniter is often praised because of its comprehensive documentation. Use this to your advantage and read the "Introduction" and "General Topics" sections thoroughly. You should read the class and helper references when needed.

+ +

Every intermediate PHP programmer should be able to get the hang of CodeIgniter within a few days.

+ +

If you still have questions about the framework or your own CodeIgniter code, you can:

Check out our forums
Visit our IRC chatroom
Explore the Wiki

+ +

+ + + + + + + \ No newline at end of file diff --git a/user_guide_src/source/tutorial/create_news_items.html b/user_guide_src/source/tutorial/create_news_items.html new file mode 100644 index 000000000..48c82c799 --- /dev/null +++ b/user_guide_src/source/tutorial/create_news_items.html @@ -0,0 +1,179 @@ + + + + + +CodeIgniter Features : CodeIgniter User Guide + + + + + + + + + + + + + + + + + + + +

+ + + + + + + + + + +

+ + +
+ + + +

+ + +

Tutorial - Create news items

+ +

You now know how you can read data from a database using CodeIgnite, but you haven't written any information to the database yet. In this section you'll expand your news controller and model created earlier to include this functionality.

+ +

Create a form

+ +

To input data into the database you need to create a form where you can input the information to be stored. This means you'll be needing a form with two fields, one for the title and one for the text. You'll derive the slug from our title in the model. Create the new view at application/views/news/create.php.

+ + + +

There are only two things here that probably look unfamiliar to you: the form_open() function and the validation_errors() function.

+ +

The first function is provided by the form helper and renders the form element and adds extra functionality, like adding a hidden CSFR prevention field. The latter is used to report errors related to form validation.

+ +

Go back to your news controller. You're going to do two things here, check whether the form was submitted and whether the submitted data passed the validation rules. You'll use the form validation library to do this.

+ +

+public function create()
+{
+	$this->load->helper('form');
+	$this->load->library('form_validation');
+	
+	$data['title'] = 'Create a news item';
+	
+	$this->form_validation->set_rules('title', 'Title', 'required');
+	$this->form_validation->set_rules('text', 'text', 'required');
+	
+	if ($this->form_validation->run() === FALSE)
+	{
+		$this->load->view('templates/header', $data);	
+		$this->load->view('news/create');
+		$this->load->view('templates/footer');
+		
+	}
+	else
+	{
+		$this->news_model->set_news();
+		$this->load->view('news/success');
+	}
+}
+

+ +

The code above adds a lot of functionality. The first few lines load the form helper and the form validation library. After that, rules for the form validation are set. The set_rules() method takes three arguments; the name of the input field, the name to be used in error messages, and the rule. In this case the title and text fields are required.

+ +

CodeIgniter has a powerful form validation library as demonstrated above. You can read more about this library here.

+ +

Continuing down, you can see a condition that checks whether the form validation ran successfully. If it did not, the form is displayed, if it was submitted and passed all the rules, the model is called. After this, a view is loaded to display a success message. Create a view at application/view/news/success.php and write a success message.

+ +

Model

+ +

The only thing that remains is writing a method that writes the data to the database. You'll use the Active Record class to insert the information and use the input library to get the posted data. Open up the model created earlier and add the following:

+ +

+public function set_news()
+{
+	$this->load->helper('url');
+	
+	$slug = url_title($this->input->post('title'), 'dash', TRUE);
+	
+	$data = array(
+		'title' => $this->input->post('title'),
+		'slug' => $slug,
+		'text' => $this->input->post('text')
+	);
+	
+	return $this->db->insert('news', $data);
+}
+

+ +

This new method takes care of inserting the news item into the database. The third line contains a new function, url_title(). This function - provided by the URL helper - strips down the string you pass it, replacing all spaces by dashes (-) and makes sure everything is in lowercase characters. This leaves you with a nice slug, perfect for creating URIs.

+ +

Let's continue with preparing the record that is going to be inserted later, inside the $data array. Each element corresponds with a column in the database table created earlier. You might notice a new method here, namely the post() method from the input library. This method makes sure the data is sanitized, protecting you from nasty attacks from others. The input library is loaded by default. At last, you insert our $data array into our database.

+ +

Routing

+ +

Before you can start adding news items into your CodeIgniter application you have to add an extra rule to config/routes.php file. Make sure your file contains the following. This makes sure CodeIgniter sees 'create' as a method instead of a news item's slug.

+ +

+$route['news/create'] = 'news/create';
+$route['news/(:any)'] = 'news/view/$1';
+$route['news'] = 'news';
+$route['(:any)'] = 'pages/view/$1';
+$route['default_controller'] = 'pages/view';
+

+ +

Now point your browser to your local development environment where you installed CodeIgniter and add index.php/news/create to the URL. Congratulations, you just created your first CodeIgniter application! Add some news and check out the different pages you made.

+ +

+ + + + + + + \ No newline at end of file diff --git a/user_guide_src/source/tutorial/hard_coded_pages.html b/user_guide_src/source/tutorial/hard_coded_pages.html new file mode 100644 index 000000000..408634a78 --- /dev/null +++ b/user_guide_src/source/tutorial/hard_coded_pages.html @@ -0,0 +1,158 @@ + + + + + +CodeIgniter Features : CodeIgniter User Guide + + + + + + + + + + + + + + + + + + + +

+ + + + + + + + + + +

+ + +
+ + + +

+ + +

Tutorial - Hard coded pages

+ +

The first thing we're going to do is setting up a controller to handle our hard coded pages. A controller is a class with a collection of methods that represent the different actions you can perform on a certain object. In our case, we want to be able to view a page.

+ +

Note: This tutorial assumes you've downloaded CodeIgniter and installed the framework in your development environment.

+ +

Create a file at application/controllers/pages.php with the following code.

+ + + +

If you're familiar with PHP classes you see that we create a Pages class with a view method that accepts one parameter, $page. Another interesting observation is that the Pages class is extending the CI_Controller class. This means that the new Pages class can access the methods and variables defined in the CI_Controller class. When you look at this class in system/core/controller.php you can see this class is doing something really important; assigning an instance from the CodeIgniter super object to the $this object. In most of your code, $this is the object you will use to interact with the framework.

+ +

Now we've created our first method, it is time to do some basic templating. For this tutorial, we will be creating two views to acts as our footer and header. Let's create our header at application/views/templates/header.php and ad the following code.

+ + + +

Our header doesn't do anything exciting. It contains the basic HTML code that we will want to display before loading the main view. You can also see that we echo the $title variable, which we didn't define. We will set this variable in the Pages controller a bit later. Let's go ahead and create a footer at application/views/templates/footer.php that includes the following code.

+ + + +

Adding logic to the controller

+ +

Now we've set up the basics so we can finally do some real programming. Earlier we set up our controller with a view method. Because we don't want to write a separate method for every page, we made the view method accept one parameter, the name of the page. These hard coded pages will be located in application/views/pages/. Create two files in this directory named home.php and about.php and put in some HTML content.

+ +

In order to load these pages we'll have to check whether these page actually exists. When the page does exist, we load the view for that pages, including the header and footer and display it to the user. If it doesn't, we show a "404 Page not found" error.

+ + + +

The first thing we do is checking whether the page we're looking for does actually exist. We use PHP's native file_exists() to do this check and pass the path where the file is supposed to be. Next is the function show_404(), a CodeIgniter function that renders the default error page and sets the appropriate HTTP headers.

+ +

In the header template you saw we were using the $title variable to customize our page title. This is where we define the title, but instead of assigning the value to a variable, we assign it to the title element in the $data array. The last thing we need to do is loading the views in the order we want them to be displayed. We also pass the $data array to the header view to make its elements available in the header view file.

+ +

Routing

+ +

Actually, our controller is already functioning. Point your browser to index.php/pages/view to see your homepage. When you visit index.php/pages/view/about you will see the about page, again including your header and footer. Now we're going to get rid of the pages/view part in our URI. As you may have seen, CodeIgniter does its routing by the class, method and parameter, separated by slashes.

+ +

Open the routing file located at application/config/routes.php and add the following two lines. Remove all other code that sets any element in the $route array.

+ + + +

CodeIgniter reads its routing rules from top to bottom and routes the request to the first matching rule. These routes are stored in the $route array where the keys represent the incoming request and the value the path to the method, as described above.

+ +

The first rule in our $routes array matches every request - using the wildcard operator (:any) - and passes the value to the view method of the pages class we created earlier. The default controller route makes sure every request to the root goes to the view method as well, which has the first parameter set to 'home' by default.

+ +

+ + + + + + + \ No newline at end of file diff --git a/user_guide_src/source/tutorial/index.html b/user_guide_src/source/tutorial/index.html new file mode 100644 index 000000000..4f665fe0a --- /dev/null +++ b/user_guide_src/source/tutorial/index.html @@ -0,0 +1,101 @@ + + + + + +CodeIgniter Features : CodeIgniter User Guide + + + + + + + + + + + + + + + + + + + +

+ + + + + + + + + + +

+ + +
+ + + +

+ + +

Tutorial − Introduction

+ +

This tutorial is intended to introduce you to the CodeIgniter framework and the basic principles of MVC architecture. It will show you how a basic CodeIgniter application is constructed in step-by-step fashion.

+ +

In this tutorial, you will be creating a basic news application. You will begin by writing the code that can load static pages. Next, you will create a news section that reads news items from a database. Finally, you'll add a form to create news items in the database.

+ +

This tutorial will primarily focus on:

Model-View-Controller basics
Routing basics
Form validation
Performing basic database queries using "Active Record"

+ +

The entire tutorial is split up over several pages, each explaining a small part of the functionality of the CodeIgniter framework. You'll go through the following pages:

Introduction, this page, which gives you an overview of what to expect.
Static pages, which will teach you the basics of controllers, views and routing.
News section, where you'll start using models and will be doing some basic database operations.
Create news items, which will introduce more advanced database operations and form validation.
Conclusion, which will give you some pointers on further reading and other resources.

+ +

Enjoy your exploration of the CodeIgniter framework.

+ +

+ + + + + + + \ No newline at end of file diff --git a/user_guide_src/source/tutorial/news_section.html b/user_guide_src/source/tutorial/news_section.html new file mode 100644 index 000000000..b2d883184 --- /dev/null +++ b/user_guide_src/source/tutorial/news_section.html @@ -0,0 +1,230 @@ + + + + + +CodeIgniter Features : CodeIgniter User Guide + + + + + + + + + + + + + + + + + + + +

+ + + + + + + + + + +

+ + +
+ + + +

+ + +

Tutorial − News section

+ +

In the last section, we went over some basic concepts of the framework by writing a class that includes static pages. We cleaned up the URI by adding custom routing rules. Now it's time to introduce dynamic content and start using a database.

+ +

Setting up your model

+ +

Instead of writing database operations right in the controller, queries should be placed in a model, so they can easily be reused later. Models are the place where you retrieve, insert, and update information in your database or other data stores. They represent your data.

+ +

Open up the application/models directory and create a new file called news_model.php and add the following code. Make sure you've configured your database properly as described here.

+ +

+<?php
+class News_model extends CI_Model {
+
+	public function __construct()
+	{
+		$this->load->database();
+	}
+}
+

+ +

This code looks similar to the controller code that was used earlier. It creates a new model by extending CI_Model and loads the database library. This will make the database class available through the $this->db object.

+ +

Before querying the database, a database schema has to be created. Connect to your database and run the SQL command below. Also add some seed records.

+ +

+CREATE TABLE news (
+	id int(11) NOT NULL AUTO_INCREMENT,
+	title varchar(128) NOT NULL,
+	slug varchar(128) NOT NULL,
+	text text NOT NULL,
+	PRIMARY KEY (id),
+	KEY slug (slug)
+);
+

+ +

Now that the database and a model have been set up, you'll need a method to get all of our posts from our database. To do this, the database abstraction layer that is included with CodeIgniter — Active Record — is used. This makes it possible to write your 'queries' once and make them work on all supported database systems. Add the following code to your model.

+ +

+public function get_news($slug = FALSE)
+{
+	if ($slug === FALSE)
+	{
+		$query = $this->db->get('news');
+		return $query->result_array();
+	}
+	
+	$query = $this->db->get_where('news', array('slug' => $slug));
+	return $query->row_array();
+}
+

+ +

With this code you can perform two different queries. You can get all news records, or get a news item by its slug. You might have noticed that the $slug variable wasn't sanitized before running the query; Active Record does this for you.

+ +

Display the news

+ +

Now that the queries are written, the model should be tied to the views that are going to display the news items to the user. This could be done in our pages controller created earlier, but for the sake of clarity, a new "news" controller is defined. Create the new controller at application/controllers/news.php.

+ +

+<?php
+class News extends CI_Controller {
+
+	public function __construct()
+	{
+		parent::__construct();
+		$this->load->model('news_model');
+	}
+
+	public function index()
+	{
+		$data['news'] = $this->news_model->get_news();
+	}
+
+	public function view($slug)
+	{
+		$data['news'] = $this->news_model->get_news($slug);
+	}
+}
+

+ +

Looking at the code, you may see some similarity with the files we created earlier. First, the "__construct" method: it calls the constructor of its parent class (CI_Controller) and loads the model, so it can be used in all other methods in this controller.

+ +

Next, there are two methods to view all news items and one for a specific news item. You can see that the $slug variable is passed to the model's method in the second method. The model is using this slug to identify the news item to be returned.

+ +

Now the data is retrieved by the controller through our model, but nothing is displayed yet. The next thing to do is passing this data to the views.

+ +

+public function index()
+{
+	$data['news'] = $this->news_model->get_news();
+	$data['title'] = 'News archive';
+
+	$this->load->view('templates/header', $data);
+	$this->load->view('news/index', $data);
+	$this->load->view('templates/footer');
+}
+

+ +

The code above gets all news records from the model and assigns it to a variable. The value for the title is also assigned to the $data['title'] element and all data is passed to the views. You now need to create a view to render the news items. Create application/views/news/index.php and add the next piece of code.

+ +

+<?php foreach ($news as $news_item): ?>
+
+    <h2><?php echo $news_item['title'] ?></h2>
+    <div id="main">
+        <?php echo $news_item['text'] ?>
+    </div>
+    <p><a href="news/<?php echo $news_item['slug'] ?>">View article</a></p>
+
+<?php endforeach ?>
+

+ +

Here, each news item is looped and displayed to the user. You can see we wrote our template in PHP mixed with HTML. If you prefer to use a template language, you can use CodeIgniter's Template Parser class or a third party parser.

+ +

The news overview page is now done, but a page to display individual news items is still absent. The model created earlier is made in such way that it can easily be used for this functionality. You only need to add some code to the controller and create a new view. Go back to the news controller and add the following lines to the file.

+ +

+public function view($slug)
+{
+	$data['news_item'] = $this->news_model->get_news($slug);
+
+	if (empty($data['news_item']))
+	{
+		show_404();
+	}
+
+	$data['title'] = $data['news_item']['title'];
+
+	$this->load->view('templates/header', $data);
+	$this->load->view('news/view', $data);
+	$this->load->view('templates/footer');
+}
+

+ +

Instead of calling the get_news() method without a parameter, the $slug variable is passed, so it will return the specific news item. The only things left to do is create the corresponding view at application/views/news/view.php. Put the following code in this file.

+ +

+<?php
+echo '<h2>'.$news_item['title'].'</h2>';
+echo $news_item['text'];
+

+ +

Routing

Because of the wildcard routing rule created earlier, you need need an extra route to view the controller that you just made. Modify your routing file (application/config/routes.php) so it looks as follows. This makes sure the requests reaches the news controller instead of going directly to the pages controller. The first line routes URI's with a slug to the view method in the news controller.

+ +

+$route['news/(:any)'] = 'news/view/$1';
+$route['news'] = 'news';
+$route['(:any)'] = 'pages/view/$1';
+$route['default_controller'] = 'pages/view';
+

+ +

Point your browser to your document root, followed by index.php/news and watch your news page.

+ +

+ + + + + + + \ No newline at end of file diff --git a/user_guide_src/source/tutorial/static_pages.html b/user_guide_src/source/tutorial/static_pages.html new file mode 100644 index 000000000..26c8306e1 --- /dev/null +++ b/user_guide_src/source/tutorial/static_pages.html @@ -0,0 +1,206 @@ + + + + + +CodeIgniter Features : CodeIgniter User Guide + + + + + + + + + + + + + + + + + + + +

+ + + + + + + + + + +

+ + +
+ + + +

+ + +

Tutorial − Static pages

+ +

Note: This tutorial assumes you've downloaded CodeIgniter and installed the framework in your development environment.

+ +

The first thing you're going to do is set up a controller to handle static pages. +A controller is simply a class that helps delegate work. It is the glue of your +web application.

+ +

For example, when a call is made to: http://example.com/news/latest/10 We might imagine +that there is a controller named "news". The method being called on news +would be "latest". The news method's job could be to grab 10 +news items, and render them on the page. Very often in MVC, you'll see URL +patterns that match: http://example.com/[controller-class]/[controller-method]/[arguments] +As URL schemes become more complex, this may change. But for now, this is all we will need to know.

+ +

Create a file at application/controllers/pages.php with the following code.

+ + + +

You have created a class named "pages", with a view method that accepts one argument named $page. +The pages class is extending the CI_Controller class. +This means that the new pages class can access the methods and variables defined in the CI_Controller class +(system/core/Controller.php).

+ +

The controller is what will become the center of every request to your web application. +In very technical CodeIgniter discussions, it may be referred to as the super object. +Like any php class, you refer to it within your controllers as $this. +Referring to $this is how you will load libraries, views, and generally +command the framework.

+ +

Now you've created your first method, it's time to make some basic page templates. +We will be creating two "views" (page templates) that act as our page footer and header.

+ +

Create the header at application/views/templates/header.php and add the following code.

+ + + +

The header contains the basic HTML code that you'll want to display before loading the main view, together with a heading. +It will also output the $title variable, which we'll define later in the controller. +Now create a footer at application/views/templates/footer.php that includes the following code:

+ + + +

Adding logic to the controller

+ +

Earlier you set up a controller with a view() method. The method accepts one parameter, which is the name of the page to be loaded. +The static page templates will be located in the application/views/pages/ directory.

+ +

In that directory, create two files named home.php and about.php. +Within those files, type some text − anything you'd like − and save them. +If you like to be particularly un-original, try "Hello World!".

+ +

In order to load those pages, you'll have to check whether the requested page actually exists:

+ +

+public function view($page = 'home')
+{
+			
+	if ( ! file_exists('application/views/pages/'.$page.'.php'))
+	{
+		// Whoops, we don't have a page for that!
+		show_404();
+	}
+	
+	$data['title'] = ucfirst($page); // Capitalize the first letter
+	
+	$this->load->view('templates/header', $data);
+	$this->load->view('pages/'.$page, $data);
+	$this->load->view('templates/footer', $data);
+
+}
+

+ +

Now, when the page does exist, it is loaded, including the header and footer, and displayed to the user. If the page doesn't exist, a "404 Page not found" error is shown.

+ +

The first line in this method checks whether the page actually exists. PHP's native file_exists() function is used to check whether the file is where it's expected to be. show_404() is a built-in CodeIgniter function that renders the default error page.

+ +

In the header template, the $title variable was used to customize the page title. The value of title is defined in this method, but instead of assigning the value to a variable, it is assigned to the title element in the $data array.

+ +

The last thing that has to be done is loading the views in the order they should be displayed. +The second parameter in the view() method is used to pass values to the view. Each value in the $data array is assigned to a variable with the name of its key. So the value of $data['title'] in the controller is equivalent to $title in the view.

+ +

Routing

+ +

The controller is now functioning! Point your browser to [your-site-url]index.php/pages/view to see your page. When you visit index.php/pages/view/about you'll see the about page, again including the header and footer.

+ +

Using custom routing rules, you have the power to map any URI to any controller and method, and break free from the normal convention: +http://example.com/[controller-class]/[controller-method]/[arguments]

+ +

Let's do that. Open the routing file located at application/config/routes.php and add the following two lines. Remove all other code that sets any element in the $route array.

+ +

+$route['default_controller'] = 'pages/view';
+$route['(:any)'] = 'pages/view/$1';
+

+ +

CodeIgniter reads its routing rules from top to bottom and routes the request to the first matching rule. Each rule is a regular expression +(left-side) mapped to a controller and method name separated by slashes (right-side). +When a request comes in, CodeIgniter looks for the first match, and calls the appropriate controller and method, possibly with arguments.

+ +

More information about routing can be found in the URI Routing documentation.

+ +

Here, the second rule in the $routes array matches any request using the wildcard string (:any). +and passes the parameter to the view() method of the pages class.

+ +

Now visit index.php/about. Did it get routed correctly to the view() method +in the pages controller? Awesome!

+ +

+ + + + + + + \ No newline at end of file -- cgit v1.2.3-24-g4f1b From 3bf17fb1423283d79a81b6ec3ca6134566b28475 Mon Sep 17 00:00:00 2001 From: Joël Cox Date: Sun, 9 Oct 2011 19:20:12 +0200 Subject: Initial conversion of the HTML to RST using pandoc. --- user_guide_src/source/tutorial/conclusion.html | 91 -------- user_guide_src/source/tutorial/conclusion.rst | 25 +++ .../source/tutorial/create_news_items.html | 179 ---------------- .../source/tutorial/create_news_items.rst | 142 +++++++++++++ .../source/tutorial/hard_coded_pages.html | 158 -------------- .../source/tutorial/hard_coded_pages.rst | 73 +++++++ user_guide_src/source/tutorial/index.html | 101 --------- user_guide_src/source/tutorial/index.rst | 35 ++++ user_guide_src/source/tutorial/news_section.html | 230 --------------------- user_guide_src/source/tutorial/news_section.rst | 213 +++++++++++++++++++ user_guide_src/source/tutorial/static_pages.html | 206 ------------------ user_guide_src/source/tutorial/static_pages.rst | 148 +++++++++++++ 12 files changed, 636 insertions(+), 965 deletions(-) delete mode 100644 user_guide_src/source/tutorial/conclusion.html create mode 100644 user_guide_src/source/tutorial/conclusion.rst delete mode 100644 user_guide_src/source/tutorial/create_news_items.html create mode 100644 user_guide_src/source/tutorial/create_news_items.rst delete mode 100644 user_guide_src/source/tutorial/hard_coded_pages.html create mode 100644 user_guide_src/source/tutorial/hard_coded_pages.rst delete mode 100644 user_guide_src/source/tutorial/index.html create mode 100644 user_guide_src/source/tutorial/index.rst delete mode 100644 user_guide_src/source/tutorial/news_section.html create mode 100644 user_guide_src/source/tutorial/news_section.rst delete mode 100644 user_guide_src/source/tutorial/static_pages.html create mode 100644 user_guide_src/source/tutorial/static_pages.rst (limited to 'user_guide_src/source/tutorial') diff --git a/user_guide_src/source/tutorial/conclusion.html b/user_guide_src/source/tutorial/conclusion.html deleted file mode 100644 index ccf89175f..000000000 --- a/user_guide_src/source/tutorial/conclusion.html +++ /dev/null @@ -1,91 +0,0 @@ - - - - - -CodeIgniter Features : CodeIgniter User Guide - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - - -

- - -
- - - -

- - -

Tutorial - Conclusion

- -

Every intermediate PHP programmer should be able to get the hang of CodeIgniter within a few days.

- -

If you still have questions about the framework or your own CodeIgniter code, you can:

Check out our forums
Visit our IRC chatroom
Explore the Wiki

- -

- - - - - - - \ No newline at end of file diff --git a/user_guide_src/source/tutorial/conclusion.rst b/user_guide_src/source/tutorial/conclusion.rst new file mode 100644 index 000000000..3b193d63d --- /dev/null +++ b/user_guide_src/source/tutorial/conclusion.rst @@ -0,0 +1,25 @@ +Tutorial - Conclusion +===================== + +This tutorial did not cover all of the things you might expect of a +full-fledged content management system, but it introduced you to the +more important topics of routing, writing controllers, and models. We +hope this tutorial gave you an insight into some of CodeIgniter's basic +design patterns, which you can expand upon. + +Now that you've completed this tutorial, we recommend you check out the +rest of the documentation. CodeIgniter is often praised because of its +comprehensive documentation. Use this to your advantage and read the +"Introduction" and "General Topics" sections thoroughly. You should read +the class and helper references when needed. + +Every intermediate PHP programmer should be able to get the hang of +CodeIgniter within a few days. + +If you still have questions about the framework or your own CodeIgniter +code, you can: + +- Check out our `forums `_ +- Visit our `IRC chatroom `_ +- Explore the `Wiki `_ + diff --git a/user_guide_src/source/tutorial/create_news_items.html b/user_guide_src/source/tutorial/create_news_items.html deleted file mode 100644 index 48c82c799..000000000 --- a/user_guide_src/source/tutorial/create_news_items.html +++ /dev/null @@ -1,179 +0,0 @@ - - - - - -CodeIgniter Features : CodeIgniter User Guide - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - - -

- - -
- - - -

- - -

Tutorial - Create news items

- -

Create a form

- -

- - - -

There are only two things here that probably look unfamiliar to you: the form_open() function and the validation_errors() function.

- -

-public function create()
-{
-	$this->load->helper('form');
-	$this->load->library('form_validation');
-	
-	$data['title'] = 'Create a news item';
-	
-	$this->form_validation->set_rules('title', 'Title', 'required');
-	$this->form_validation->set_rules('text', 'text', 'required');
-	
-	if ($this->form_validation->run() === FALSE)
-	{
-		$this->load->view('templates/header', $data);	
-		$this->load->view('news/create');
-		$this->load->view('templates/footer');
-		
-	}
-	else
-	{
-		$this->news_model->set_news();
-		$this->load->view('news/success');
-	}
-}
-

- -

CodeIgniter has a powerful form validation library as demonstrated above. You can read more about this library here.

- -

Model

- -

-public function set_news()
-{
-	$this->load->helper('url');
-	
-	$slug = url_title($this->input->post('title'), 'dash', TRUE);
-	
-	$data = array(
-		'title' => $this->input->post('title'),
-		'slug' => $slug,
-		'text' => $this->input->post('text')
-	);
-	
-	return $this->db->insert('news', $data);
-}
-

- -

Routing

- -

-$route['news/create'] = 'news/create';
-$route['news/(:any)'] = 'news/view/$1';
-$route['news'] = 'news';
-$route['(:any)'] = 'pages/view/$1';
-$route['default_controller'] = 'pages/view';
-

- -

- - - - - - - \ No newline at end of file diff --git a/user_guide_src/source/tutorial/create_news_items.rst b/user_guide_src/source/tutorial/create_news_items.rst new file mode 100644 index 000000000..4a0056ada --- /dev/null +++ b/user_guide_src/source/tutorial/create_news_items.rst @@ -0,0 +1,142 @@ +Tutorial - Create news items +============================ + +You now know how you can read data from a database using CodeIgnite, but +you haven't written any information to the database yet. In this section +you'll expand your news controller and model created earlier to include +this functionality. + +Create a form +------------- + +To input data into the database you need to create a form where you can +input the information to be stored. This means you'll be needing a form +with two fields, one for the title and one for the text. You'll derive +the slug from our title in the model. Create the new view at +application/views/news/create.php. + +Create a news item +------------------ + + Title + Text + + +There are only two things here that probably look unfamiliar to you: the +form\_open() function and the validation\_errors() function. + +The first function is provided by the `form +helper <../helpers/form_helper.html>`_ and renders the form element and +adds extra functionality, like adding a hidden `CSFR prevention +field <../libraries/security.html>`_. The latter is used to report +errors related to form validation. + +Go back to your news controller. You're going to do two things here, +check whether the form was submitted and whether the submitted data +passed the validation rules. You'll use the `form +validation <../libraries/form_validation.html>`_ library to do this. + +:: + + public function create() + { + $this->load->helper('form'); + $this->load->library('form_validation'); + + $data['title'] = 'Create a news item'; + + $this->form_validation->set_rules('title', 'Title', 'required'); + $this->form_validation->set_rules('text', 'text', 'required'); + + if ($this->form_validation->run() === FALSE) + { + $this->load->view('templates/header', $data); + $this->load->view('news/create'); + $this->load->view('templates/footer'); + + } + else + { + $this->news_model->set_news(); + $this->load->view('news/success'); + } + } + +The code above adds a lot of functionality. The first few lines load the +form helper and the form validation library. After that, rules for the +form validation are set. The set\_rules() method takes three arguments; +the name of the input field, the name to be used in error messages, and +the rule. In this case the title and text fields are required. + +CodeIgniter has a powerful form validation library as demonstrated +above. You can read `more about this library +here <../libraries/form_validation.html>`_. + +Continuing down, you can see a condition that checks whether the form +validation ran successfully. If it did not, the form is displayed, if it +was submitted **and** passed all the rules, the model is called. After +this, a view is loaded to display a success message. Create a view at +application/view/news/success.php and write a success message. + +Model +----- + +The only thing that remains is writing a method that writes the data to +the database. You'll use the Active Record class to insert the +information and use the input library to get the posted data. Open up +the model created earlier and add the following: + +:: + + public function set_news() + { + $this->load->helper('url'); + + $slug = url_title($this->input->post('title'), 'dash', TRUE); + + $data = array( + 'title' => $this->input->post('title'), + 'slug' => $slug, + 'text' => $this->input->post('text') + ); + + return $this->db->insert('news', $data); + } + +This new method takes care of inserting the news item into the database. +The third line contains a new function, url\_title(). This function - +provided by the `URL helper <../helpers/url_helper.html>`_ - strips down +the string you pass it, replacing all spaces by dashes (-) and makes +sure everything is in lowercase characters. This leaves you with a nice +slug, perfect for creating URIs. + +Let's continue with preparing the record that is going to be inserted +later, inside the $data array. Each element corresponds with a column in +the database table created earlier. You might notice a new method here, +namely the post() method from the `input +library <../libraries/input.html>`_. This method makes sure the data is +sanitized, protecting you from nasty attacks from others. The input +library is loaded by default. At last, you insert our $data array into +our database. + +Routing +------- + +Before you can start adding news items into your CodeIgniter application +you have to add an extra rule to config/routes.php file. Make sure your +file contains the following. This makes sure CodeIgniter sees 'create' +as a method instead of a news item's slug. + +:: + + $route['news/create'] = 'news/create'; + $route['news/(:any)'] = 'news/view/$1'; + $route['news'] = 'news'; + $route['(:any)'] = 'pages/view/$1'; + $route['default_controller'] = 'pages/view'; + +Now point your browser to your local development environment where you +installed CodeIgniter and add index.php/news/create to the URL. +Congratulations, you just created your first CodeIgniter application! +Add some news and check out the different pages you made. diff --git a/user_guide_src/source/tutorial/hard_coded_pages.html b/user_guide_src/source/tutorial/hard_coded_pages.html deleted file mode 100644 index 408634a78..000000000 --- a/user_guide_src/source/tutorial/hard_coded_pages.html +++ /dev/null @@ -1,158 +0,0 @@ - - - - - -CodeIgniter Features : CodeIgniter User Guide - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - - -

- - -
- - - -

- - -

Tutorial - Hard coded pages

- -

Note: This tutorial assumes you've downloaded CodeIgniter and installed the framework in your development environment.

- -

Create a file at application/controllers/pages.php with the following code.

- - - -

- -

- - - -

Adding logic to the controller

- -

- - - -

- -

Routing

- -

Open the routing file located at application/config/routes.php and add the following two lines. Remove all other code that sets any element in the $route array.

- - - -

- -

- - - - - - - \ No newline at end of file diff --git a/user_guide_src/source/tutorial/hard_coded_pages.rst b/user_guide_src/source/tutorial/hard_coded_pages.rst new file mode 100644 index 000000000..c7b541768 --- /dev/null +++ b/user_guide_src/source/tutorial/hard_coded_pages.rst @@ -0,0 +1,73 @@ +CodeIgniter 2 Tutorial +====================== + +Our header doesn't do anything exciting. It contains the basic HTML code +that we will want to display before loading the main view. You can also +see that we echo the $title variable, which we didn't define. We will +set this variable in the Pages controller a bit later. Let's go ahead +and create a footer at application/views/templates/footer.php that +includes the following code. + +**© 2011** + +Adding logic to the controller +------------------------------ + +Now we've set up the basics so we can finally do some real programming. +Earlier we set up our controller with a view method. Because we don't +want to write a separate method for every page, we made the view method +accept one parameter, the name of the page. These hard coded pages will +be located in application/views/pages/. Create two files in this +directory named home.php and about.php and put in some HTML content. + +In order to load these pages we'll have to check whether these page +actually exists. When the page does exist, we load the view for that +pages, including the header and footer and display it to the user. If it +doesn't, we show a "404 Page not found" error. + +public function view($page = 'home') { if ( ! +file\_exists('application/views/pages/' . $page . EXT)) { show\_404(); } +$data['title'] = ucfirst($page); $this->load->view('templates/header', +$data); $this->load->view('pages/'.$page); +$this->load->view('templates/footer'); } + +The first thing we do is checking whether the page we're looking for +does actually exist. We use PHP's native file\_exists() to do this check +and pass the path where the file is supposed to be. Next is the function +show\_404(), a CodeIgniter function that renders the default error page +and sets the appropriate HTTP headers. + +In the header template you saw we were using the $title variable to +customize our page title. This is where we define the title, but instead +of assigning the value to a variable, we assign it to the title element +in the $data array. The last thing we need to do is loading the views in +the order we want them to be displayed. We also pass the $data array to +the header view to make its elements available in the header view file. + +Routing +------- + +Actually, our controller is already functioning. Point your browser to +index.php/pages/view to see your homepage. When you visit +index.php/pages/view/about you will see the about page, again including +your header and footer. Now we're going to get rid of the pages/view +part in our URI. As you may have seen, CodeIgniter does its routing by +the class, method and parameter, separated by slashes. + +Open the routing file located at application/config/routes.php and add +the following two lines. Remove all other code that sets any element in +the $route array. + +$route['(:any)'] = 'pages/view/$1'; $route['default\_controller'] = +'pages/view'; + +CodeIgniter reads its routing rules from top to bottom and routes the +request to the first matching rule. These routes are stored in the +$route array where the keys represent the incoming request and the value +the path to the method, as described above. + +The first rule in our $routes array matches every request - using the +wildcard operator (:any) - and passes the value to the view method of +the pages class we created earlier. The default controller route makes +sure every request to the root goes to the view method as well, which +has the first parameter set to 'home' by default. diff --git a/user_guide_src/source/tutorial/index.html b/user_guide_src/source/tutorial/index.html deleted file mode 100644 index 4f665fe0a..000000000 --- a/user_guide_src/source/tutorial/index.html +++ /dev/null @@ -1,101 +0,0 @@ - - - - - -CodeIgniter Features : CodeIgniter User Guide - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - - -

- - -
- - - -

- - -

Tutorial − Introduction

- -

This tutorial will primarily focus on:

Model-View-Controller basics
Routing basics
Form validation
Performing basic database queries using "Active Record"

- -

The entire tutorial is split up over several pages, each explaining a small part of the functionality of the CodeIgniter framework. You'll go through the following pages:

Introduction, this page, which gives you an overview of what to expect.
Static pages, which will teach you the basics of controllers, views and routing.
News section, where you'll start using models and will be doing some basic database operations.
Create news items, which will introduce more advanced database operations and form validation.
Conclusion, which will give you some pointers on further reading and other resources.

- -

Enjoy your exploration of the CodeIgniter framework.

- -

- - - - - - - \ No newline at end of file diff --git a/user_guide_src/source/tutorial/index.rst b/user_guide_src/source/tutorial/index.rst new file mode 100644 index 000000000..a0ed53c85 --- /dev/null +++ b/user_guide_src/source/tutorial/index.rst @@ -0,0 +1,35 @@ +Tutorial − Introduction +======================= + +This tutorial is intended to introduce you to the CodeIgniter framework +and the basic principles of MVC architecture. It will show you how a +basic CodeIgniter application is constructed in step-by-step fashion. + +In this tutorial, you will be creating a **basic news application**. You +will begin by writing the code that can load static pages. Next, you +will create a news section that reads news items from a database. +Finally, you'll add a form to create news items in the database. + +This tutorial will primarily focus on: + +- Model-View-Controller basics +- Routing basics +- Form validation +- Performing basic database queries using "Active Record" + +The entire tutorial is split up over several pages, each explaining a +small part of the functionality of the CodeIgniter framework. You'll go +through the following pages: + +- Introduction, this page, which gives you an overview of what to + expect. +- `Static pages `_, which will teach you the basics + of controllers, views and routing. +- `News section `_, where you'll start using models + and will be doing some basic database operations. +- `Create news items `_, which will introduce + more advanced database operations and form validation. +- `Conclusion `_, which will give you some pointers on + further reading and other resources. + +Enjoy your exploration of the CodeIgniter framework. diff --git a/user_guide_src/source/tutorial/news_section.html b/user_guide_src/source/tutorial/news_section.html deleted file mode 100644 index b2d883184..000000000 --- a/user_guide_src/source/tutorial/news_section.html +++ /dev/null @@ -1,230 +0,0 @@ - - - - - -CodeIgniter Features : CodeIgniter User Guide - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - - -

- - -
- - - -

- - -

Tutorial − News section

- -

Setting up your model

- -

Open up the application/models directory and create a new file called news_model.php and add the following code. Make sure you've configured your database properly as described here.

- -

-<?php
-class News_model extends CI_Model {
-
-	public function __construct()
-	{
-		$this->load->database();
-	}
-}
-

- -

Before querying the database, a database schema has to be created. Connect to your database and run the SQL command below. Also add some seed records.

- -

-CREATE TABLE news (
-	id int(11) NOT NULL AUTO_INCREMENT,
-	title varchar(128) NOT NULL,
-	slug varchar(128) NOT NULL,
-	text text NOT NULL,
-	PRIMARY KEY (id),
-	KEY slug (slug)
-);
-

- -

-public function get_news($slug = FALSE)
-{
-	if ($slug === FALSE)
-	{
-		$query = $this->db->get('news');
-		return $query->result_array();
-	}
-	
-	$query = $this->db->get_where('news', array('slug' => $slug));
-	return $query->row_array();
-}
-

- -

Display the news

- -

-<?php
-class News extends CI_Controller {
-
-	public function __construct()
-	{
-		parent::__construct();
-		$this->load->model('news_model');
-	}
-
-	public function index()
-	{
-		$data['news'] = $this->news_model->get_news();
-	}
-
-	public function view($slug)
-	{
-		$data['news'] = $this->news_model->get_news($slug);
-	}
-}
-

- -

Now the data is retrieved by the controller through our model, but nothing is displayed yet. The next thing to do is passing this data to the views.

- -

-public function index()
-{
-	$data['news'] = $this->news_model->get_news();
-	$data['title'] = 'News archive';
-
-	$this->load->view('templates/header', $data);
-	$this->load->view('news/index', $data);
-	$this->load->view('templates/footer');
-}
-

- -

-<?php foreach ($news as $news_item): ?>
-
-    <h2><?php echo $news_item['title'] ?></h2>
-    <div id="main">
-        <?php echo $news_item['text'] ?>
-    </div>
-    <p><a href="news/<?php echo $news_item['slug'] ?>">View article</a></p>
-
-<?php endforeach ?>
-

- -

-public function view($slug)
-{
-	$data['news_item'] = $this->news_model->get_news($slug);
-
-	if (empty($data['news_item']))
-	{
-		show_404();
-	}
-
-	$data['title'] = $data['news_item']['title'];
-
-	$this->load->view('templates/header', $data);
-	$this->load->view('news/view', $data);
-	$this->load->view('templates/footer');
-}
-

- -

-<?php
-echo '<h2>'.$news_item['title'].'</h2>';
-echo $news_item['text'];
-

- -

Routing

- -

-$route['news/(:any)'] = 'news/view/$1';
-$route['news'] = 'news';
-$route['(:any)'] = 'pages/view/$1';
-$route['default_controller'] = 'pages/view';
-

- -

Point your browser to your document root, followed by index.php/news and watch your news page.

- -

- - - - - - - \ No newline at end of file diff --git a/user_guide_src/source/tutorial/news_section.rst b/user_guide_src/source/tutorial/news_section.rst new file mode 100644 index 000000000..d37c3408f --- /dev/null +++ b/user_guide_src/source/tutorial/news_section.rst @@ -0,0 +1,213 @@ +Tutorial − News section +======================= + +In the last section, we went over some basic concepts of the framework +by writing a class that includes static pages. We cleaned up the URI by +adding custom routing rules. Now it's time to introduce dynamic content +and start using a database. + +Setting up your model +--------------------- + +Instead of writing database operations right in the controller, queries +should be placed in a model, so they can easily be reused later. Models +are the place where you retrieve, insert, and update information in your +database or other data stores. They represent your data. + +Open up the application/models directory and create a new file called +news\_model.php and add the following code. Make sure you've configured +your database properly as described +`here <../database/configuration.html>`_. + +:: + + load->database(); + } + } + +This code looks similar to the controller code that was used earlier. It +creates a new model by extending CI\_Model and loads the database +library. This will make the database class available through the +$this->db object. + +Before querying the database, a database schema has to be created. +Connect to your database and run the SQL command below. Also add some +seed records. + +:: + + CREATE TABLE news ( + id int(11) NOT NULL AUTO_INCREMENT, + title varchar(128) NOT NULL, + slug varchar(128) NOT NULL, + text text NOT NULL, + PRIMARY KEY (id), + KEY slug (slug) + ); + +Now that the database and a model have been set up, you'll need a method +to get all of our posts from our database. To do this, the database +abstraction layer that is included with CodeIgniter — `Active +Record <../database/active_record.html>`_ — is used. This makes it +possible to write your 'queries' once and make them work on `all +supported database systems <../general/requirements.html>`_. Add the +following code to your model. + +:: + + public function get_news($slug = FALSE) + { + if ($slug === FALSE) + { + $query = $this->db->get('news'); + return $query->result_array(); + } + + $query = $this->db->get_where('news', array('slug' => $slug)); + return $query->row_array(); + } + +With this code you can perform two different queries. You can get all +news records, or get a news item by its `slug <#>`_. You might have +noticed that the $slug variable wasn't sanitized before running the +query; Active Record does this for you. + +Display the news +---------------- + +Now that the queries are written, the model should be tied to the views +that are going to display the news items to the user. This could be done +in our pages controller created earlier, but for the sake of clarity, a +new "news" controller is defined. Create the new controller at +application/controllers/news.php. + +:: + + load->model('news_model'); + } + + public function index() + { + $data['news'] = $this->news_model->get_news(); + } + + public function view($slug) + { + $data['news'] = $this->news_model->get_news($slug); + } + } + +Looking at the code, you may see some similarity with the files we +created earlier. First, the "\_\_construct" method: it calls the +constructor of its parent class (CI\_Controller) and loads the model, so +it can be used in all other methods in this controller. + +Next, there are two methods to view all news items and one for a +specific news item. You can see that the $slug variable is passed to the +model's method in the second method. The model is using this slug to +identify the news item to be returned. + +Now the data is retrieved by the controller through our model, but +nothing is displayed yet. The next thing to do is passing this data to +the views. + +:: + + public function index() + { + $data['news'] = $this->news_model->get_news(); + $data['title'] = 'News archive'; + + $this->load->view('templates/header', $data); + $this->load->view('news/index', $data); + $this->load->view('templates/footer'); + } + +The code above gets all news records from the model and assigns it to a +variable. The value for the title is also assigned to the $data['title'] +element and all data is passed to the views. You now need to create a +view to render the news items. Create application/views/news/index.php +and add the next piece of code. + +:: + + + +

+ +

View article

+ + + +Here, each news item is looped and displayed to the user. You can see we +wrote our template in PHP mixed with HTML. If you prefer to use a +template language, you can use CodeIgniter's `Template +Parser <../libraries/parser.html>`_ class or a third party parser. + +The news overview page is now done, but a page to display individual +news items is still absent. The model created earlier is made in such +way that it can easily be used for this functionality. You only need to +add some code to the controller and create a new view. Go back to the +news controller and add the following lines to the file. + +:: + + public function view($slug) + { + $data['news_item'] = $this->news_model->get_news($slug); + + if (empty($data['news_item'])) + { + show_404(); + } + + $data['title'] = $data['news_item']['title']; + + $this->load->view('templates/header', $data); + $this->load->view('news/view', $data); + $this->load->view('templates/footer'); + } + +Instead of calling the get\_news() method without a parameter, the $slug +variable is passed, so it will return the specific news item. The only +things left to do is create the corresponding view at +application/views/news/view.php. Put the following code in this file. + +:: + + '.$news_item['title'].''; + echo $news_item['text']; + +Routing +------- + +Because of the wildcard routing rule created earlier, you need need an +extra route to view the controller that you just made. Modify your +routing file (application/config/routes.php) so it looks as follows. +This makes sure the requests reaches the news controller instead of +going directly to the pages controller. The first line routes URI's with +a slug to the view method in the news controller. + +:: + + $route['news/(:any)'] = 'news/view/$1'; + $route['news'] = 'news'; + $route['(:any)'] = 'pages/view/$1'; + $route['default_controller'] = 'pages/view'; + +Point your browser to your document root, followed by index.php/news and +watch your news page. diff --git a/user_guide_src/source/tutorial/static_pages.html b/user_guide_src/source/tutorial/static_pages.html deleted file mode 100644 index 26c8306e1..000000000 --- a/user_guide_src/source/tutorial/static_pages.html +++ /dev/null @@ -1,206 +0,0 @@ - - - - - -CodeIgniter Features : CodeIgniter User Guide - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - - -

- - -
- - - -

- - -

Tutorial − Static pages

- -

Note: This tutorial assumes you've downloaded CodeIgniter and installed the framework in your development environment.

- -

The first thing you're going to do is set up a controller to handle static pages. -A controller is simply a class that helps delegate work. It is the glue of your -web application.

- -

For example, when a call is made to: http://example.com/news/latest/10 We might imagine -that there is a controller named "news". The method being called on news -would be "latest". The news method's job could be to grab 10 -news items, and render them on the page. Very often in MVC, you'll see URL -patterns that match: http://example.com/[controller-class]/[controller-method]/[arguments] -As URL schemes become more complex, this may change. But for now, this is all we will need to know.

- -

Create a file at application/controllers/pages.php with the following code.

- - - -

You have created a class named "pages", with a view method that accepts one argument named $page. -The pages class is extending the CI_Controller class. -This means that the new pages class can access the methods and variables defined in the CI_Controller class -(system/core/Controller.php).

- -

The controller is what will become the center of every request to your web application. -In very technical CodeIgniter discussions, it may be referred to as the super object. -Like any php class, you refer to it within your controllers as $this. -Referring to $this is how you will load libraries, views, and generally -command the framework.

- -

Now you've created your first method, it's time to make some basic page templates. -We will be creating two "views" (page templates) that act as our page footer and header.

- -

Create the header at application/views/templates/header.php and add the following code.

- - - -

The header contains the basic HTML code that you'll want to display before loading the main view, together with a heading. -It will also output the $title variable, which we'll define later in the controller. -Now create a footer at application/views/templates/footer.php that includes the following code:

- - - -

Adding logic to the controller

- -

Earlier you set up a controller with a view() method. The method accepts one parameter, which is the name of the page to be loaded. -The static page templates will be located in the application/views/pages/ directory.

- -

In that directory, create two files named home.php and about.php. -Within those files, type some text − anything you'd like − and save them. -If you like to be particularly un-original, try "Hello World!".

- -

In order to load those pages, you'll have to check whether the requested page actually exists:

- -

-public function view($page = 'home')
-{
-			
-	if ( ! file_exists('application/views/pages/'.$page.'.php'))
-	{
-		// Whoops, we don't have a page for that!
-		show_404();
-	}
-	
-	$data['title'] = ucfirst($page); // Capitalize the first letter
-	
-	$this->load->view('templates/header', $data);
-	$this->load->view('pages/'.$page, $data);
-	$this->load->view('templates/footer', $data);
-
-}
-

- -

Now, when the page does exist, it is loaded, including the header and footer, and displayed to the user. If the page doesn't exist, a "404 Page not found" error is shown.

- -

The last thing that has to be done is loading the views in the order they should be displayed. -The second parameter in the view() method is used to pass values to the view. Each value in the $data array is assigned to a variable with the name of its key. So the value of $data['title'] in the controller is equivalent to $title in the view.

- -

Routing

- -

Using custom routing rules, you have the power to map any URI to any controller and method, and break free from the normal convention: -http://example.com/[controller-class]/[controller-method]/[arguments]

- -

Let's do that. Open the routing file located at application/config/routes.php and add the following two lines. Remove all other code that sets any element in the $route array.

- -

-$route['default_controller'] = 'pages/view';
-$route['(:any)'] = 'pages/view/$1';
-

- -

CodeIgniter reads its routing rules from top to bottom and routes the request to the first matching rule. Each rule is a regular expression -(left-side) mapped to a controller and method name separated by slashes (right-side). -When a request comes in, CodeIgniter looks for the first match, and calls the appropriate controller and method, possibly with arguments.

- -

More information about routing can be found in the URI Routing documentation.

- -

Here, the second rule in the $routes array matches any request using the wildcard string (:any). -and passes the parameter to the view() method of the pages class.

- -

Now visit index.php/about. Did it get routed correctly to the view() method -in the pages controller? Awesome!

- -

- - - - - - - \ No newline at end of file diff --git a/user_guide_src/source/tutorial/static_pages.rst b/user_guide_src/source/tutorial/static_pages.rst new file mode 100644 index 000000000..3c95c8b25 --- /dev/null +++ b/user_guide_src/source/tutorial/static_pages.rst @@ -0,0 +1,148 @@ +Tutorial − Static pages +======================= + +**Note:** This tutorial assumes you've downloaded CodeIgniter and +`installed the framework <../installation/index.html>`_ in your +development environment. + +The first thing you're going to do is set up a **controller** to handle +static pages. A controller is simply a class that helps delegate work. +It is the glue of your web application. + +For example, when a call is made to: +``http://example.com/news/latest/10`` We might imagine that there is a +controller named "news". The method being called on news would be +"latest". The news method's job could be to grab 10 news items, and +render them on the page. Very often in MVC, you'll see URL patterns that +match: +``http://example.com/[controller-class]/[controller-method]/[arguments]`` +As URL schemes become more complex, this may change. But for now, this +is all we will need to know. + +Create a file at application/controllers/pages.php with the following +code. + +load->view('templates/header', $data); + $this->load->view('pages/'.$page, $data); + $this->load->view('templates/footer', $data); + + } + +Now, when the page does exist, it is loaded, including the header and +footer, and displayed to the user. If the page doesn't exist, a "404 +Page not found" error is shown. + +The first line in this method checks whether the page actually exists. +PHP's native file\_exists() function is used to check whether the file +is where it's expected to be. show\_404() is a built-in CodeIgniter +function that renders the default error page. + +In the header template, the $title variable was used to customize the +page title. The value of title is defined in this method, but instead of +assigning the value to a variable, it is assigned to the title element +in the $data array. + +The last thing that has to be done is loading the views in the order +they should be displayed. The second parameter in the view() method is +used to pass values to the view. Each value in the $data array is +assigned to a variable with the name of its key. So the value of +$data['title'] in the controller is equivalent to $title in the view. + +Routing +------- + +The controller is now functioning! Point your browser to +[your-site-url]index.php/pages/view to see your page. When you visit +index.php/pages/view/about you'll see the about page, again including +the header and footer. + +Using custom routing rules, you have the power to map any URI to any +controller and method, and break free from the normal convention: +``http://example.com/[controller-class]/[controller-method]/[arguments]`` + +Let's do that. Open the routing file located at +application/config/routes.php and add the following two lines. Remove +all other code that sets any element in the $route array. + +:: + + $route['default_controller'] = 'pages/view'; + $route['(:any)'] = 'pages/view/$1'; + +CodeIgniter reads its routing rules from top to bottom and routes the +request to the first matching rule. Each rule is a regular expression +(left-side) mapped to a controller and method name separated by slashes +(right-side). When a request comes in, CodeIgniter looks for the first +match, and calls the appropriate controller and method, possibly with +arguments. + +More information about routing can be found in the URI Routing +`documentation <../general/routing.html>`_. + +Here, the second rule in the $routes array matches **any** request using +the wildcard string (:any). and passes the parameter to the view() +method of the pages class. + +Now visit index.php/about. Did it get routed correctly to the view() +method in the pages controller? Awesome! -- cgit v1.2.3-24-g4f1b From c2b48812b1e1c3457ddaffb2fbbfcccb45554694 Mon Sep 17 00:00:00 2001 From: Joël Cox Date: Mon, 10 Oct 2011 20:24:46 +0200 Subject: Fixed markup glitches from HTML to RST parser. --- user_guide_src/source/tutorial/conclusion.rst | 5 +- .../source/tutorial/create_news_items.rst | 29 ++++++--- .../source/tutorial/hard_coded_pages.rst | 73 ---------------------- user_guide_src/source/tutorial/index.rst | 16 ++++- user_guide_src/source/tutorial/news_section.rst | 7 ++- user_guide_src/source/tutorial/static_pages.rst | 40 +++++++++--- 6 files changed, 72 insertions(+), 98 deletions(-) delete mode 100644 user_guide_src/source/tutorial/hard_coded_pages.rst (limited to 'user_guide_src/source/tutorial') diff --git a/user_guide_src/source/tutorial/conclusion.rst b/user_guide_src/source/tutorial/conclusion.rst index 3b193d63d..48fbdcc8a 100644 --- a/user_guide_src/source/tutorial/conclusion.rst +++ b/user_guide_src/source/tutorial/conclusion.rst @@ -1,5 +1,6 @@ -Tutorial - Conclusion -===================== +########## +Conclusion +########## This tutorial did not cover all of the things you might expect of a full-fledged content management system, but it introduced you to the diff --git a/user_guide_src/source/tutorial/create_news_items.rst b/user_guide_src/source/tutorial/create_news_items.rst index 4a0056ada..003b94bd8 100644 --- a/user_guide_src/source/tutorial/create_news_items.rst +++ b/user_guide_src/source/tutorial/create_news_items.rst @@ -1,5 +1,6 @@ -Tutorial - Create news items -============================ +################# +Create news items +################# You now know how you can read data from a database using CodeIgnite, but you haven't written any information to the database yet. In this section @@ -15,16 +16,26 @@ with two fields, one for the title and one for the text. You'll derive the slug from our title in the model. Create the new view at application/views/news/create.php. -Create a news item ------------------- +:: + +

Create a news item

+ + + + + + Title +
+ + Text +
+ + - Title - Text - + There are only two things here that probably look unfamiliar to you: the -form\_open() function and the validation\_errors() function. +form_open() function and the validation_errors() function. The first function is provided by the `form helper <../helpers/form_helper.html>`_ and renders the form element and diff --git a/user_guide_src/source/tutorial/hard_coded_pages.rst b/user_guide_src/source/tutorial/hard_coded_pages.rst deleted file mode 100644 index c7b541768..000000000 --- a/user_guide_src/source/tutorial/hard_coded_pages.rst +++ /dev/null @@ -1,73 +0,0 @@ -CodeIgniter 2 Tutorial -====================== - -Our header doesn't do anything exciting. It contains the basic HTML code -that we will want to display before loading the main view. You can also -see that we echo the $title variable, which we didn't define. We will -set this variable in the Pages controller a bit later. Let's go ahead -and create a footer at application/views/templates/footer.php that -includes the following code. - -**© 2011** - -Adding logic to the controller ------------------------------- - -Now we've set up the basics so we can finally do some real programming. -Earlier we set up our controller with a view method. Because we don't -want to write a separate method for every page, we made the view method -accept one parameter, the name of the page. These hard coded pages will -be located in application/views/pages/. Create two files in this -directory named home.php and about.php and put in some HTML content. - -In order to load these pages we'll have to check whether these page -actually exists. When the page does exist, we load the view for that -pages, including the header and footer and display it to the user. If it -doesn't, we show a "404 Page not found" error. - -public function view($page = 'home') { if ( ! -file\_exists('application/views/pages/' . $page . EXT)) { show\_404(); } -$data['title'] = ucfirst($page); $this->load->view('templates/header', -$data); $this->load->view('pages/'.$page); -$this->load->view('templates/footer'); } - -The first thing we do is checking whether the page we're looking for -does actually exist. We use PHP's native file\_exists() to do this check -and pass the path where the file is supposed to be. Next is the function -show\_404(), a CodeIgniter function that renders the default error page -and sets the appropriate HTTP headers. - -In the header template you saw we were using the $title variable to -customize our page title. This is where we define the title, but instead -of assigning the value to a variable, we assign it to the title element -in the $data array. The last thing we need to do is loading the views in -the order we want them to be displayed. We also pass the $data array to -the header view to make its elements available in the header view file. - -Routing -------- - -Actually, our controller is already functioning. Point your browser to -index.php/pages/view to see your homepage. When you visit -index.php/pages/view/about you will see the about page, again including -your header and footer. Now we're going to get rid of the pages/view -part in our URI. As you may have seen, CodeIgniter does its routing by -the class, method and parameter, separated by slashes. - -Open the routing file located at application/config/routes.php and add -the following two lines. Remove all other code that sets any element in -the $route array. - -$route['(:any)'] = 'pages/view/$1'; $route['default\_controller'] = -'pages/view'; - -CodeIgniter reads its routing rules from top to bottom and routes the -request to the first matching rule. These routes are stored in the -$route array where the keys represent the incoming request and the value -the path to the method, as described above. - -The first rule in our $routes array matches every request - using the -wildcard operator (:any) - and passes the value to the view method of -the pages class we created earlier. The default controller route makes -sure every request to the root goes to the view method as well, which -has the first parameter set to 'home' by default. diff --git a/user_guide_src/source/tutorial/index.rst b/user_guide_src/source/tutorial/index.rst index a0ed53c85..eb6f11e34 100644 --- a/user_guide_src/source/tutorial/index.rst +++ b/user_guide_src/source/tutorial/index.rst @@ -1,5 +1,6 @@ -Tutorial − Introduction -======================= +######## +Tutorial +######## This tutorial is intended to introduce you to the CodeIgniter framework and the basic principles of MVC architecture. It will show you how a @@ -33,3 +34,14 @@ through the following pages: further reading and other resources. Enjoy your exploration of the CodeIgniter framework. + +.. toctree:: + :glob: + :hidden: + :titlesonly: + + index + static_pages + news_section + create_news_items + conclusion \ No newline at end of file diff --git a/user_guide_src/source/tutorial/news_section.rst b/user_guide_src/source/tutorial/news_section.rst index d37c3408f..fe8e41607 100644 --- a/user_guide_src/source/tutorial/news_section.rst +++ b/user_guide_src/source/tutorial/news_section.rst @@ -1,5 +1,6 @@ -Tutorial − News section -======================= +############ +News section +############ In the last section, we went over some basic concepts of the framework by writing a class that includes static pages. We cleaned up the URI by @@ -15,7 +16,7 @@ are the place where you retrieve, insert, and update information in your database or other data stores. They represent your data. Open up the application/models directory and create a new file called -news\_model.php and add the following code. Make sure you've configured +news_model.php and add the following code. Make sure you've configured your database properly as described `here <../database/configuration.html>`_. diff --git a/user_guide_src/source/tutorial/static_pages.rst b/user_guide_src/source/tutorial/static_pages.rst index 3c95c8b25..0bbf51b1b 100644 --- a/user_guide_src/source/tutorial/static_pages.rst +++ b/user_guide_src/source/tutorial/static_pages.rst @@ -1,5 +1,6 @@ -Tutorial − Static pages -======================= +############ +Static pages +############ **Note:** This tutorial assumes you've downloaded CodeIgniter and `installed the framework <../installation/index.html>`_ in your @@ -22,13 +23,22 @@ is all we will need to know. Create a file at application/controllers/pages.php with the following code. - + + CodeIgniter 2 Tutorial + + + +

CodeIgniter 2 Tutorial

The header contains the basic HTML code that you'll want to display before loading the main view, together with a heading. It will also @@ -53,7 +70,11 @@ output the $title variable, which we'll define later in the controller. Now create a footer at application/views/templates/footer.php that includes the following code: -© 2011 +:: + + © 2011 + + Adding logic to the controller ------------------------------ @@ -72,6 +93,7 @@ page actually exists: :: + Date: Mon, 10 Oct 2011 17:22:33 -0500 Subject: removed 'index' listing from tutorial index toc --- user_guide_src/source/tutorial/index.rst | 1 - 1 file changed, 1 deletion(-) (limited to 'user_guide_src/source/tutorial') diff --git a/user_guide_src/source/tutorial/index.rst b/user_guide_src/source/tutorial/index.rst index eb6f11e34..c959d04d2 100644 --- a/user_guide_src/source/tutorial/index.rst +++ b/user_guide_src/source/tutorial/index.rst @@ -40,7 +40,6 @@ Enjoy your exploration of the CodeIgniter framework. :hidden: :titlesonly: - index static_pages news_section create_news_items -- cgit v1.2.3-24-g4f1b

CodeIgniter User Guide Version 2.0.3

Tutorial - Conclusion

CodeIgniter User Guide Version 2.0.3

Tutorial - Create news items

Create a form

Model

Routing

CodeIgniter User Guide Version 2.0.3

Tutorial - Hard coded pages

Adding logic to the controller

Routing

CodeIgniter User Guide Version 2.0.3

Tutorial − Introduction

CodeIgniter User Guide Version 2.0.3

Tutorial − News section

Setting up your model

Display the news

Routing

CodeIgniter User Guide Version 2.0.3

Tutorial − Static pages

Adding logic to the controller

Routing

CodeIgniter User Guide Version 2.0.3

Tutorial - Conclusion

CodeIgniter User Guide Version 2.0.3

Tutorial - Create news items

Create a form

Model

Routing

CodeIgniter User Guide Version 2.0.3

Tutorial - Hard coded pages

Adding logic to the controller

Routing

CodeIgniter User Guide Version 2.0.3

Tutorial − Introduction

CodeIgniter User Guide Version 2.0.3

Tutorial − News section

Setting up your model

Display the news

Routing

CodeIgniter User Guide Version 2.0.3

Tutorial − Static pages

Adding logic to the controller

Routing

Create a news item

CodeIgniter 2 Tutorial