Form Validation

Before explaining CodeIgniter's approach to data validation, let's describe the ideal scenario:

A form is displayed.
You fill it in and submit it.
If you submitted something invalid, or perhaps missed a required item, the form is redisplayed containing your data along with an error message describing the problem.
This process continues until you have submitted a valid form.

On the receiving end, the script must:

Check for required data.
Verify that the data is of the correct type, and meets the correct criteria. (For example, if a username is submitted it must be validated to contain only permitted characters. It must be of a minimum length, and not exceed a maximum length. The username can't be someone else's existing username, or perhaps even a reserved word. Etc.)
Sanitize the data for security.
Pre-format the data if needed (Does the data need to be trimmed? HTML encoded? Etc.)
Prep the data for insertion in the database.

Although there is nothing complex about the above process, it usually requires a significant amount of code, and to display error messages, various control structures are usually placed within the form HTML. Form validation, while simple to create, is generally very messy and tedious to implement.

CodeIgniter provides a comprehensive validation framework that truly minimizes the amount of code you'll write. It also removes all control structures from your form HTML, permitting it to be clean and free of code.

Overview

In order to implement CodeIgniter's form validation you'll need three things:

A View file containing the form.
A View file containing a "success" message to be displayed upon successful submission.
A controller function to receive and process the submitted data.

Let's create those three things, using a member sign-up form as the example.

The Form

Using a text editor, create a form called myform.php. In it, place this code and save it to your applications/views/ folder:

The Success Page

Using a text editor, create a form called formsuccess.php. In it, place this code and save it to your applications/views/ folder:

The Controller

Using a text editor, create a controller called form.php. In it, place this code and save it to your applications/controllers/ folder:

Try it!

To try your form, visit your site using a URL similar to this one:

www.your-site.com/index.php/form/

If you submit the form you should simply see the form reload. That's because you haven't set up any validation rules yet, which we'll get to in a moment.

Explanation

You'll notice several things about the above pages:

The form (myform.php) is a standard web form with a couple exceptions:

It uses a form helper to create the form opening. Technically, this isn't necessary. You could create the form using standard HTML. However, the benefit of using the helper is that it generates the action URL for you, based on the URL in your config file. This makes your application more portable and flexible in the event your URLs change.
At the top of the form you'll notice the following variable: <?=$this->validation->error_string; ?>
This variable will display any error messages sent back by the validator. If there are no messages it returns nothing.

The controller (form.php) has one function: index(). This function initializes the validation class and loads the form helper and URL helper used by your view files. It also runs the validation routine. Based on whether the validation was successful it either presents the form or the success page.

Since you haven't told the validation class to validate anything yet, it returns "false" (boolean false) by default. The run() function only returns "true" if it has successfully applied your rules without any of them failing.

Setting Validation Rules

CodeIgniter lets you set as many validation rules as you need for a given field, cascading them in order, and it even lets you prep and pre-process the field data at the same time. Let's see it in action, we'll explain it afterwards.

In your controller (form.php), add this code just below the validation initialization function:

$rules['username']	= "required";

$rules['password']	= "required";

$rules['passconf']	= "required";

$rules['email']		= "required";



$this->validation->set_rules($rules);

Your controller should now look like this:

Now submit the form with the fields blank and you should see the error message. If you submit the form with all the fields populated you'll see your success page.

Note: The form fields are not yet being re-populated with the data when there is an error. We'll get to that shortly, once we're through explaining the validation rules.

Changing the Error Delimiters

By default, the system adds a paragraph tag (<p>) around each error message shown. You can easily change these delimiters with this code, placed in your controller:

$this->validation->set_error_delimiters('<div class="error">', '</div>');

In this example, we've switched to using div tags.

Cascading Rules

CodeIgniter lets you pipe multiple rules together. Let's try it. Change your rules array like this:

$rules['username']	= "required|min_length[5]|max_length[12]";

$rules['password']	= "required|matches[passconf]";

$rules['passconf']	= "required";

$rules['email']		= "required|valid_email";

The above code requires that:

The username field be no shorter than 5 characters and no longer than 12.
The password field must match the password confirmation field.
The email field must contain a valid email address.

Give it a try!

Note: There are numerous rules available which you can read about in the validation reference.

Prepping Data

In addition to the validation functions like the ones we used above, you can also prep your data in various ways. For example, you can set up rules like this:

$rules['username']	= "trim|required|min_length[5]|max_length[12]|xss_clean";

$rules['password']	= "trim|required|matches[passconf]|md5";

$rules['passconf']	= "trim|required";

$rules['email']		= "trim|required|valid_email";

In the above, we are "trimming" the fields, converting the password to MD5, and running the username through the "xss_clean" function, which removes malicious data.

Any native PHP function that accepts one parameter can be used as a rule, like htmlspecialchars, trim, MD5, etc.

Note: You will generally want to use the prepping functions after the validation rules so if there is an error, the original data will be shown in the form.

Callbacks: Your own Validation Functions

The validation system supports callbacks to your own validation functions. This permits you to extend the validation class to meet your needs. For example, if you need to run a database query to see if the user is choosing a unique username, you can create a callback function that does that. Let's create a simple example.

In your controller, change the "username" rule to this:

$rules['username'] = "callback_username_check";

Then add a new function called username_check to your controller. Here's how your controller should look:

Reload your form and submit it with the word "test" as the username. You can see that the form field data was passed to your callback function for you to process.

To invoke a callback just put the function name in a rule, with "callback_" as the rule prefix.

The error message was set using the $this->validation->set_message function. Just remember that the message key (the first parameter) must match your function name.

Note: You can apply your own custom error messages to any rule, just by setting the message similarly. For example, to change the message for the "required" rule you will do this:

$this->validation->set_message('required', 'Your custom message here');

Re-populating the form

Thus far we have only been dealing with errors. It's time to repopulate the form field with the submitted data. This is done similarly to your rules. Add the following code to your controller, just below your rules:

$fields['username'] = 'Username';

$fields['password'] = 'Password';

$fields['passconf'] = 'Password Confirmation';

$fields['email'] = 'Email Address';



$this->validation->set_fields($fields);

The array keys are the actual names of the form fields, the value represents the full name that you want shown in the error message.

The index function of your controller should now look like this:

Now open your myform.php view file and update the value in each field so that it has an object corresponding to its name:

Now reload your page and submit the form so that it triggers an error. Your form fields should be populated and the error messages will contain a more relevant field name.

Showing Errors Individually

If you prefer to show an error message next to each form field, rather than as a list, you can change your form so that it looks like this:

<textarea class="textarea" style="width:100%" cols="50" rows="20"> <h5>Username</h5> <?=$this->validation->username_error; ?> <input type="text" name="username" value="<?=$this->validation->username;?>" size="50" /> <h5>Password</h5> <?=$this->validation->password_error; ?> <input type="text" name="password" value="<?=$this->validation->password;?>" size="50" /> <h5>Password Confirm</h5> <?=$this->validation->passconf_error; ?> <input type="text" name="passconf" value="<?=$this->validation->passconf;?>" size="50" /> <h5>Email Address</h5> <?=$this->validation->email_error; ?> <input type="text" name="email" value="<?=$this->validation->email;?>" size="50" /></textarea>

If there are no errors, nothing will be shown. If there is an error, the message will appear, wrapped in the delimiters you have set (<p> tags by default).

Note: To display errors this way you must remember to set your fields using the $this->validation->set_fields function described earlier. The errors will be turned into variables that have "_error" after your field name. For example, your "username" error will be available at:
$this->validation->username_error.

Rule Reference

The following is a list of all the native rules that are available to use:

Rule	Parameter	Description	Example
required	No	Returns FALSE if the form element is empty.
matches	Yes	Returns FALSE if the form element does not match the one in the parameter.	matches[form_item]
min_length	Yes	Returns FALSE if the form element is shorter then the parameter value.	min_length[6]
max_length	Yes	Returns FALSE if the form element is longer then the parameter value.	max_length[12]
exact_length	Yes	Returns FALSE if the form element is not exactly the parameter value.	exact_length[8]
alpha	No	Returns FALSE if the form element contains anything other than alphabetical characters.
alpha_numeric	No	Returns FALSE if the form element contains anything other than alpha-numeric characters.
alpha_dash	No	Returns FALSE if the form element contains anything other than alpha-numeric characters, underscores or dashes.
numeric	No	Returns FALSE if the form element contains anything other than numeric characters.
valid_email	No	Returns FALSE if the form element does not contain a valid email address.
valid_ip	No	Returns FALSE if the supplied IP is not valid.

Note: These rules can also be called as discreet functions. For example:

$this->validation->required($string);

Note: You can also use any native PHP functions that permit one parameter.

Prepping Reference

The following is a list of all the prepping functions that are available to use:

Name	Parameter	Description
xss_clean	No	Runs the data through the XSS filtering function, described in the Input Class page.
prep_for_form	No	Converts special characters so that HTML data can be shown in a form field without breaking it.
prep_url	No	Adds "http://" to URLs if missing.
strip_image_tags	No	Strips the HTML from image tags leaving the raw URL.
encode_php_tags	No	Converts PHP tags to entities.

Note: You can also use any native PHP functions that permit one parameter, like trim, htmlspecialchars, urldecode, etc.

Setting Custom Error Messages

All of the native error messages are located in the following language file: language/english/validation_lang.php

To set your own custom message you can either edit that file, or use the following function:

$this->validation->set_message('rule', 'Error Message');

Where rule corresponds to the name of a particular rule, and Error Message is the text you would like displayed.

Dealing with Select Menus, Radio Buttons, and Checkboxes

If you use select menus, radio buttons or checkboxes, you will want the state of these items to be retained in the event of an error. The Validation class has three functions that help you do this:

set_select()

Permits you to display the menu item that was selected. The first parameter must contain the name of the select menu, the second parameter must contain the value of each item. Example:


<select name="myselect">

<option value="one" <?= $this->validation->set_select('myselect', 'one'); ?> >One</option>

<option value="two" <?= $this->validation->set_select('myselect', 'two'); ?> >Three</option>

<option value="three" <?= $this->validation->set_select('myselect', 'three'); ?> >Three</option>

</select>

set_checkbox()

Permits you to display a checkbox in the state it was submitted. The first parameter must contain the name of the checkbox, the second parameter must contain its value. Example:

<input type="checkbox" name="mycheck" value="1" <?= $this->validation->set_checkbox('mycheck', '1'); ?> />

set_radio()

Permits you to display radio buttons in the state they were submitted. The first parameter must contain the name of the radio button, the second parameter must contain its value. Example:

<input type="radio" name="myradio" value="1" <?= $this->validation->set_radio('myradio', '1'); ?> />

CodeIgniter User Guide Version 1.5.3