###########
Email Class
###########

CodeIgniter's robust Email Class supports the following features:

-  Multiple Protocols: Mail, Sendmail, and SMTP
-  TLS and SSL Encryption for SMTP
-  Multiple recipients
-  CC and BCCs
-  HTML or Plaintext email
-  Attachments
-  Word wrapping
-  Priorities
-  BCC Batch Mode, enabling large email lists to be broken into small
   BCC batches.
-  Email Debugging tools

.. contents::
  :local:

.. raw:: html

  <div class="custom-index container"></div>

***********************
Using the Email Library
***********************

Sending Email
=============

Sending email is not only simple, but you can configure it on the fly or
set your preferences in a config file.

Here is a basic example demonstrating how you might send email. Note:
This example assumes you are sending the email from one of your
:doc:`controllers <../general/controllers>`.

::

	$this->load->library('email');

	$this->email->from('your@example.com', 'Your Name');
	$this->email->to('someone@example.com');
	$this->email->cc('another@another-example.com');
	$this->email->bcc('them@their-example.com');

	$this->email->subject('Email Test');
	$this->email->message('Testing the email class.');

	$this->email->send();

Setting Email Preferences
=========================

There are 21 different preferences available to tailor how your email
messages are sent. You can either set them manually as described here,
or automatically via preferences stored in your config file, described
below:

Preferences are set by passing an array of preference values to the
email initialize method. Here is an example of how you might set some
preferences::

	$config['protocol'] = 'sendmail';
	$config['mailpath'] = '/usr/sbin/sendmail';
	$config['charset'] = 'iso-8859-1';
	$config['wordwrap'] = TRUE;

	$this->email->initialize($config);

.. note:: Most of the preferences have default values that will be used
	if you do not set them.

Setting Email Preferences in a Config File
------------------------------------------

If you prefer not to set preferences using the above method, you can
instead put them into a config file. Simply create a new file called the
email.php, add the $config array in that file. Then save the file at
config/email.php and it will be used automatically. You will NOT need to
use the ``$this->email->initialize()`` method if you save your
preferences in a config file.

Email Preferences
=================

The following is a list of all the preferences that can be set when
sending email.

=================== ====================== ============================ =======================================================================
Preference          Default Value          Options                      Description
=================== ====================== ============================ =======================================================================
**useragent**       CodeIgniter            None                         The "user agent".
**protocol**        mail                   mail, sendmail, or smtp      The mail sending protocol.
**mailpath**        /usr/sbin/sendmail     None                         The server path to Sendmail.
**smtp_host**       No Default             None                         SMTP Server Address.
**smtp_user**       No Default             None                         SMTP Username.
**smtp_pass**       No Default             None                         SMTP Password.
**smtp_port**       25                     None                         SMTP Port.
**smtp_timeout**    5                      None                         SMTP Timeout (in seconds).
**smtp_keepalive**  FALSE                  TRUE or FALSE (boolean)      Enable persistent SMTP connections.
**smtp_crypto**     No Default             tls or ssl                   SMTP Encryption
**wordwrap**        TRUE                   TRUE or FALSE (boolean)      Enable word-wrap.
**wrapchars**       76                                                  Character count to wrap at.
**mailtype**        text                   text or html                 Type of mail. If you send HTML email you must send it as a complete web
                                                                        page. Make sure you don't have any relative links or relative image
                                                                        paths otherwise they will not work.
**charset**         ``$config['charset']``                              Character set (utf-8, iso-8859-1, etc.).
**validate**        TRUE                   TRUE or FALSE (boolean)      Whether to validate the email address.
**priority**        3                      1, 2, 3, 4, 5                Email Priority. 1 = highest. 5 = lowest. 3 = normal.
**crlf**            \\n                    "\\r\\n" or "\\n" or "\\r"   Newline character. (Use "\\r\\n" to comply with RFC 822).
**newline**         \\n                    "\\r\\n" or "\\n" or "\\r"   Newline character. (Use "\\r\\n" to comply with RFC 822).
**bcc_batch_mode**  FALSE                  TRUE or FALSE (boolean)      Enable BCC Batch Mode.
**bcc_batch_size**  200                    None                         Number of emails in each BCC batch.
**dsn**             FALSE                  TRUE or FALSE (boolean)      Enable notify message from server
=================== ====================== ============================ =======================================================================

Overriding Word Wrapping
========================

If you have word wrapping enabled (recommended to comply with RFC 822)
and you have a very long link in your email it can get wrapped too,
causing it to become un-clickable by the person receiving it.
CodeIgniter lets you manually override word wrapping within part of your
message like this::

	The text of your email that
	gets wrapped normally.

	{unwrap}http://example.com/a_long_link_that_should_not_be_wrapped.html{/unwrap}

	More text that will be
	wrapped normally.


Place the item you do not want word-wrapped between: {unwrap} {/unwrap}

***************
Class Reference
***************

.. php:class:: CI_Email

	.. php:method:: from($from[, $name = ''[, $return_path = NULL]])

		:param	string	$from: "From" e-mail address
		:param	string	$name: "From" display name
		:param	string	$return_path: Optional email address to redirect undelivered e-mail to
		:returns:	CI_Email instance (method chaining)
		:rtype:	CI_Email

		Sets the email address and name of the person sending the email::

			$this->email->from('you@example.com', 'Your Name');

		You can also set a Return-Path, to help redirect undelivered mail::

			$this->email->from('you@example.com', 'Your Name', 'returned_emails@example.com');

		.. note:: Return-Path can't be used if you've configured 'smtp' as
			your protocol.

	.. php:method:: reply_to($replyto[, $name = ''])

		:param	string	$replyto: E-mail address for replies
		:param	string	$name: Display name for the reply-to e-mail address
		:returns:	CI_Email instance (method chaining)
		:rtype:	CI_Email

		Sets the reply-to address. If the information is not provided the
		information in the :meth:from method is used. Example::

			$this->email->reply_to('you@example.com', 'Your Name');

	.. php:method:: to($to)

		:param	mixed	$to: Comma-delimited string or an array of e-mail addresses
		:returns:	CI_Email instance (method chaining)
		:rtype:	CI_Email

		Sets the email address(s) of the recipient(s). Can be a single e-mail,
		a comma-delimited list or an array::

			$this->email->to('someone@example.com');

		::

			$this->email->to('one@example.com, two@example.com, three@example.com');

		::

			$this->email->to(
				array('one@example.com', 'two@example.com', 'three@example.com')
			);

	.. php:method:: cc($cc)

		:param	mixed	$cc: Comma-delimited string or an array of e-mail addresses
		:returns:	CI_Email instance (method chaining)
		:rtype:	CI_Email

		Sets the CC email address(s). Just like the "to", can be a single e-mail,
		a comma-delimited list or an array.

	.. php:method:: bcc($bcc[, $limit = ''])

		:param	mixed	$bcc: Comma-delimited string or an array of e-mail addresses
		:param	int	$limit: Maximum number of e-mails to send per batch
		:returns:	CI_Email instance (method chaining)
		:rtype:	CI_Email

		Sets the BCC email address(s). Just like the ``to()`` method, can be a single
		e-mail, a comma-delimited list or an array.

		If ``$limit`` is set, "batch mode" will be enabled, which will send
		the emails to batches, with each batch not exceeding the specified
		``$limit``.

	.. php:method:: subject($subject)

		:param	string	$subject: E-mail subject line
		:returns:	CI_Email instance (method chaining)
		:rtype:	CI_Email

		Sets the email subject::

			$this->email->subject('This is my subject');

	.. php:method:: message($body)

		:param	string	$body: E-mail message body
		:returns:	CI_Email instance (method chaining)
		:rtype:	CI_Email

		Sets the e-mail message body::

			$this->email->message('This is my message');

	.. php:method:: set_alt_message($str)

		:param	string	$str: Alternative e-mail message body
		:returns:	CI_Email instance (method chaining)
		:rtype:	CI_Email

		Sets the alternative e-mail message body::

			$this->email->set_alt_message('This is the alternative message');

		This is an optional message string which can be used if you send
		HTML formatted email. It lets you specify an alternative message
		with no HTML formatting which is added to the header string for
		people who do not accept HTML email. If you do not set your own
		message CodeIgniter will extract the message from your HTML email
		and strip the tags.

	.. php:method:: set_header($header, $value)

		:param	string	$header: Header name
		:param	string	$value: Header value
		:returns:	CI_Email instance (method chaining)
		:rtype: CI_Email

		Appends additional headers to the e-mail::

			$this->email->set_header('Header1', 'Value1');
			$this->email->set_header('Header2', 'Value2');

	.. php:method:: clear([$clear_attachments = FALSE])

		:param	bool	$clear_attachments: Whether or not to clear attachments
		:returns:	CI_Email instance (method chaining)
		:rtype: CI_Email

		Initializes all the email variables to an empty state. This method
		is intended for use if you run the email sending method in a loop,
		permitting the data to be reset between cycles.

		::

			foreach ($list as $name => $address)
			{
				$this->email->clear();

				$this->email->to($address);
				$this->email->from('your@example.com');
				$this->email->subject('Here is your info '.$name);
				$this->email->message('Hi '.$name.' Here is the info you requested.');
				$this->email->send();
			}

		If you set the parameter to TRUE any attachments will be cleared as
		well::

			$this->email->clear(TRUE);

	.. php:method:: send([$auto_clear = TRUE])

		:param	bool	$auto_clear: Whether to clear message data automatically
		:returns:	TRUE on success, FALSE on failure
		:rtype:	bool

		The e-mail sending method. Returns boolean TRUE or FALSE based on
		success or failure, enabling it to be used conditionally::

			if ( ! $this->email->send())
			{
				// Generate error
			}

		This method will automatically clear all parameters if the request was
		successful. To stop this behaviour pass FALSE::

		 	if ($this->email->send(FALSE))
		 	{
		 		// Parameters won't be cleared
		 	}

		.. note:: In order to use the ``print_debugger()`` method, you need
			to avoid clearing the email parameters.

	.. php:method:: attach($filename[, $disposition = ''[, $newname = NULL[, $mime = '']]])

		:param	string	$filename: File name
		:param	string	$disposition: 'disposition' of the attachment. Most
			email clients make their own decision regardless of the MIME
			specification used here. https://www.iana.org/assignments/cont-disp/cont-disp.xhtml
		:param	string	$newname: Custom file name to use in the e-mail
		:param	string	$mime: MIME type to use (useful for buffered data)
		:returns:	CI_Email instance (method chaining)
		:rtype:	CI_Email

		Enables you to send an attachment. Put the file path/name in the first
		parameter. For multiple attachments use the method multiple times.
		For example::

			$this->email->attach('/path/to/photo1.jpg');
			$this->email->attach('/path/to/photo2.jpg');
			$this->email->attach('/path/to/photo3.jpg');

		To use the default disposition (attachment), leave the second parameter blank,
		otherwise use a custom disposition::

			$this->email->attach('image.jpg', 'inline');

		You can also use a URL::

			$this->email->attach('http://example.com/filename.pdf');

		If you'd like to use a custom file name, you can use the third parameter::

			$this->email->attach('filename.pdf', 'attachment', 'report.pdf');

		If you need to use a buffer string instead of a real - physical - file you can
		use the first parameter as buffer, the third parameter as file name and the fourth
		parameter as mime-type::

			$this->email->attach($buffer, 'attachment', 'report.pdf', 'application/pdf');

	.. php:method:: attachment_cid($filename)

		:param	string	$filename: Existing attachment filename
		:returns:	Attachment Content-ID or FALSE if not found
		:rtype:	string
 
		Sets and returns an attachment's Content-ID, which enables your to embed an inline
		(picture) attachment into HTML. First parameter must be the already attached file name.
		::
 
			$filename = '/img/photo1.jpg';
			$this->email->attach($filename);
			foreach ($list as $address)
			{
				$this->email->to($address);
				$cid = $this->email->attachment_cid($filename);
				$this->email->message('<img src="cid:'. $cid .'" alt="photo1" />');
				$this->email->send();
			}

		.. note:: Content-ID for each e-mail must be re-created for it to be unique.

	.. php:method:: print_debugger([$include = array('headers', 'subject', 'body')])

		:param	array	$include: Which parts of the message to print out
		:returns:	Formatted debug data
		:rtype:	string

		Returns a string containing any server messages, the email headers, and
		the email message. Useful for debugging.

		You can optionally specify which parts of the message should be printed.
		Valid options are: **headers**, **subject**, **body**.

		Example::

			// You need to pass FALSE while sending in order for the email data
			// to not be cleared - if that happens, print_debugger() would have
			// nothing to output.
			$this->email->send(FALSE);

			// Will only print the email headers, excluding the message subject and body
			$this->email->print_debugger(array('headers'));

		.. note:: By default, all of the raw data will be printed.