remove 'net' hooks. these belong to mkinitcpio-nfs-utils0.8.8

Signed-off-by: Dave Reisner <dreisner@archlinux.org>

1 files changed, 0 insertions, 106 deletions

diff --git a/install/net b/install/net
deleted file mode 100644
index 88d0c97..0000000
--- a/install/net
+++ /dev/null
@@ -1,106 +0,0 @@
-#!/bin/bash
-
-build() {
-    MODULES="nfs $(checked_modules "/drivers/net/") "
-    SCRIPT="net"
-
-    add_binary "/lib/initcpio/ipconfig" "/bin/ipconfig"
-    add_binary "/lib/initcpio/nfsmount" "/bin/nfsmount"
-}
-
-help() {
-    cat <<HELPEOF
-This hook loads the necessary modules for a network device.
-Detection will take place at runtime. To minimize the modules
-in the image, add the autodetect hook too.
-For pcmcia net devices please use pcmcia hook too.
-
-Kernel Parameters:
-An interface spec can be either short form, which is just the name of
-an interface (eth0 or whatever), or long form.  The long form consists
-of up to seven elements, separated by colons:
-
-ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>
-nfsaddrs= is an alias to ip= and can be used too.
-
-<client-ip>   IP address of the client. If empty, the address will
-              either be determined by RARP/BOOTP/DHCP. What protocol
-              is used de- pends on the <autoconf> parameter. If this
-              parameter is not empty, autoconf will be used.
-
-<server-ip>   IP address of the NFS server. If RARP is used to
-              determine the client address and this parameter is NOT
-              empty only replies from the specified server are
-              accepted. To use different RARP and NFS server,
-              specify your RARP server here (or leave it blank), and
-              specify your NFS server in the 'nfsroot' parameter
-              (see above). If this entry is blank the address of the
-              server is used which answered the RARP/BOOTP/DHCP
-              request.
-
-<gw-ip>       IP address of a gateway if the server is on a different
-              subnet. If this entry is empty no gateway is used and the
-              server is assumed to be on the local network, unless a
-              value has been received by BOOTP/DHCP.
-
-<netmask>     Netmask for local network interface. If this is empty,
-              the netmask is derived from the client IP address assuming
-              classful addressing, unless overridden in BOOTP/DHCP reply.
-
-<hostname>    Name of the client. If empty, the client IP address is
-              used in ASCII notation, or the value received by
-              BOOTP/DHCP.
-
-<device>      Name of network device to use. If this is empty, all
-              devices are used for RARP/BOOTP/DHCP requests, and the
-              first one we receive a reply on is configured. If you
-              have only one device, you can safely leave this blank.
-
-<autoconf>    Method to use for autoconfiguration. If this is either
-              'rarp', 'bootp', or 'dhcp' the specified protocol is
-              used.  If the value is 'both', 'all' or empty, all
-              protocols are used.  'off', 'static' or 'none' means
-              no autoconfiguration.
-Examples:
-ip=127.0.0.1:::::lo:none  --> Enable the loopback interface.
-ip=192.168.1.1:::::eth2:none --> Enable static eth2 interface.
-ip=:::::eth0:dhcp --> Enable dhcp protcol for eth0 configuration.
-
-nfsroot=[<server-ip>:]<root-dir>[,<nfs-options>]
-
-If the 'nfsroot' parameter is NOT given on the command line, the default
-"/tftpboot/%s" will be used.
-
-<server-ip>   Specifies the IP address of the NFS server. If this field
-              is not given, the default address as determined by the
-              'ip' variable (see below) is used. One use of this
-              parameter is for example to allow using different servers
-              for RARP and NFS. Usually you can leave this blank.
-
-<root-dir>    Name of the directory on the server to mount as root. If
-              there is a "%s" token in the string, the token will be
-              replaced by the ASCII-representation of the client's IP
-              address.
-
-<nfs-options> Standard NFS options. All options are separated by commas.
-              If the options field is not given, the following defaults
-              will be used:
-                      port            = as given by server portmap daemon
-                      rsize           = 1024
-                      wsize           = 1024
-                      timeo           = 7
-                      retrans         = 3
-                      acregmin        = 3
-                      acregmax        = 60
-                      acdirmin        = 30
-                      acdirmax        = 60
-                      flags           = hard, nointr, noposix, cto, ac
-
-root=/dev/nfs
-
-If you don't use nfsroot= parameter you need to set root=/dev/nfs
-to boot from a nfs root by autoconfiguration.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et: