summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2011-07-24keymap/consolefont: source rc.conf properly from $BASEDIRDave Reisner2-29/+37
This is partially in response to FS#24685, which should hopefully cut back on configuration duplication on non-sysvinit systems. This does, however, also fix a bug with keymap/consolefont pulling the wrong rc.conf when BASEDIR is not '/' or unset. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-24install/consolefont: cleanup and refactorDave Reisner1-25/+27
* Provide support for uncompressed font files as well as compressed * Avoiding using an unnecessary temp file * Support $BASEDIR * Warn when no font is found * Only add the runtime hook if a font is added Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-10generate VERSION only for the tarballHEADmasterFlorian Pritz1-9/+5
Signed-off-by: Florian Pritz <bluewind@xinu.at>
2011-07-09mkinitcpio: reference -h on failed option parsingDave Reisner1-2/+2
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-09autodetect: add verbose feedback on autodetect successDave Reisner1-0/+4
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-09functions: restore verbose feedback to add_moduleDave Reisner1-0/+1
Since we no longer call _add_file from add_module, we lose our 'adding file..' feedback on -v. Explicitly mention each module alongside addition of the path/name to the associated arrays. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-09mkinitcpio: add --quiet to bsdcpio without -vDave Reisner1-1/+3
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-05lsinitcpio: fix logical error in reading compression0.7.2Dave Reisner1-1/+1
2011-07-05autodetect: check for /sys/devices before autodetectingDave Reisner1-2/+2
Oops. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-05cleanup devel PKGBUILDDave Reisner1-4/+7
* Assign a better $pkgver that will be more in line with released versions. This means we can just provide this version and let pacman upgrade. * raise udev dependency to 171
2011-07-05Makefile: allow git-describe to determine versionDave Reisner1-5/+10
For distribution, a VERSION file is written to and distributed for storing the ref. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-04mkinitcpio: include version in help msgDave Reisner2-0/+2
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-04fix module installation issues with BASEDIRDave Reisner1-1/+4
Broken in 491a99. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-04functions: do not null delimit modalias dataDave Reisner1-2/+2
These files will never be more than one line, and they're newline delimited already. Moreover, adding the extra null delimiters appears to do strange things in transit to modprobe. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-04manpage: clarify behaviors, add example, fix typosDave Reisner1-5/+13
I've neglected to do this along the way and some options, such as -k or -p now have additional behaviors that should be made known. Now that basedir support is legit, add an example showing a possible invocation. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-04manpage: wrap at 80 columns, add a vim modelineDave Reisner1-15/+39
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-04unify error messaging, both in grammar and outputDave Reisner2-13/+14
This also removes a superfluous check on MODULEDIR, which is already covered by get_kernver. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-04mkinitcpio: refactor BASEDIR resolutionDave Reisner1-11/+12
This should be performed first, to avoid false positives on any checks that would have been previously done before we knew our BASEDIR was valid. Remove usage of readlink here as well, and use pushd/pwd to resolve. The final trimming of any trailing slash (which might be the entire BASEDIR value) resolves an edge case bug where specifying a BASEDIR that resolved to '/' would cause explosions in add_symlink. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-03Release version 0.7.10.7.1Thomas Bächler1-1/+1
2011-07-03Merge branch 'working' of https://github.com/falconindy/mkinitcpio into workingThomas Bächler3-10/+19
2011-07-02functions: remove cruft from in_arrayDave Reisner1-3/+2
the for loop is already a NOOP when the haystack is empty, so it already falls through to the return 1. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-02cleanup rarely and unused variable declarationsDave Reisner1-5/+2
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-02Fix -k /path when -b is usedGerardo Exequiel Pozzi1-1/+1
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-07-02base/install: rewrite the config to sanitize itDave Reisner1-2/+15
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-02Trim leading spaces in MODULES and earlymodules to prevent error messages ↵Thomas Bächler1-3/+4
when one is set to " "
2011-07-02install modules all at onceDave Reisner2-2/+6
build an array of paths to modules, and install them all at once with mkdir -p and cp --parents. Cuts back on our major source of calls to install(1). This is a tad ugly in that it creates some amount of data duplication, keeping an array of paths in addition to module names. However, turns out to be a worthwhile tradeoff as merging the two datasets into one results in the need for massive string trimming.
2011-07-02functions: reorg, no code changesDave Reisner1-83/+83
Mostly, this groups "private" functions together, separate from public functions. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-02always exit from cleanupDave Reisner2-18/+9
There's no use case for us calling cleanup without exiting afterwards, so we can simplify all of our cleanup;exit; calls into just cleanup. This means our sighandler is no longer needed (it wasn't really, to begin with), but we split it up to make sure we exit with a posix-ish 128+signum exit value. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-01functions: call _add_file directly from add_moduleDave Reisner1-1/+1
This avoids an expensive stat call and some other unnecessary path juggling. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-01function: fix whitespace errorsDave Reisner1-21/+21
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-01lsinitcpio: add optional colorized outputDave Reisner2-17/+46
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-01lsinitcpio: append, not overwrite found hooksDave Reisner1-1/+1
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-01mkinitcpio: use msg instead of echo for hook helpDave Reisner1-1/+1
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-01avoid touching the linker directlyDave Reisner2-24/+4
Much to my chagrin, we're going back to using ldd directly, as it's otherwise too difficult to account for odd setups, such as idiots wanting to create multilib initramfs images, or more commonly -- a 64 bit kernel on a 32 bit userland. Fortunately, we don't suffer too large a regression in speed compared to the previous implementation. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-01functions: reduce calls to modinfoDave Reisner1-27/+24
Cut back to a single call to modinfo, instead of 3, which yields roughly a 30% decrease in execution time for a single run of add_module. This of course varies by module but it's an overall win. Suggested-by: Dan McGee <dan@archlinux.org> Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-06-30init_functions/default_mount_handler: use -l option for blkid to avoid ↵Thomas Bächler1-1/+1
syntax errors in a later mount command Fixes FS#24969.
2011-06-30function: return with 0 if we reach the end of add_binaryDave Reisner1-0/+2
The read loop will intentionally return 1 on EOF, but parse_hook will interpret this as an error, and trip our error handler, reporting a false positive failure.
2011-06-30bash-completion: use a PE instead of sedDave Reisner1-1/+2
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-06-30bash-completion: match style to rest of codeDave Reisner1-5/+5
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-06-30bash-completion: complete -k on kernel imagesDave Reisner1-1/+15
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-06-30Release version 0.70.7Thomas Bächler1-1/+1
2011-06-30install/keymap: fix installation ($buildroot -> $BUILDROOT)Thomas Bächler1-4/+4
2011-06-30Add .gitignore fileThomas Bächler1-0/+4
2011-06-30Add asciidoc as makedepends in private PKGBUILD.Gerardo Exequiel Pozzi1-0/+1
Avoid: make: a2x: Command not found Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-06-27Use _get_comp_words_by_ref in bash completionSebastien Luttringer1-8/+8
Thanks Dave Reisner for suggestion Signed-off-by: Sebastien Luttringer <seblu@seblu.net>
2011-06-27Merge branch 'working'Thomas Bächler3-11/+12
2011-06-27mkinitcpio: fix resolution issues with RTLDDave Reisner1-3/+2
The _add_dir call is all wrong. The necessary paths are created by reversing the order of the _add_symlink and _add_file calls, as _add_file will take care of creating parent directories. Thanks-to: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar> Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-06-27install/base: use private API call to add configDave Reisner2-2/+4
We can't let add_file get its hands on the config file, because we need to be sure that an absolute path is honored. As a side effect, ensure that $BASEDIR is appended to the config file during preset processing. Thanks-to: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar> Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-06-27functions: fix pathing issue with $BASEDIRDave Reisner1-3/+3
Thanks-to: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar> Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-06-27functions: s/basedir/BASEDIR/Dave Reisner1-2/+2
Thanks-to: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar> Signed-off-by: Dave Reisner <dreisner@archlinux.org>