summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2011-11-29hooks/net: Refactor and remove sed cmd usage.Gerardo Exequiel Pozzi2-48/+18
* ipconfig cmd writes a file in /tmp that is ready for direct evaluation. We can use this instead of parsing the output, to do this some variable renames are needed. * Add /tmp as part of "base" layout since this can be used by others hooks/cmds. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-11-26init: Remove unneeded test0.8.0Gerardo Exequiel Pozzi1-5/+3
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar> Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-16init: Remove sed cmd usageGerardo Exequiel Pozzi1-1/+1
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar> Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-16init: Remove grep usageGerardo Exequiel Pozzi1-2/+1
The only downside is on systems where devtmpfs is not enabled will see and error message, anyway /dev will be tmpfs as fallback like now. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-15use util-linux's switch_root binaryDave Reisner2-8/+2
This is a much better solution than busybox's, as it will move our API filesystems and /run for us. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-15init_functions: simplify parse_cmdlineDave Reisner1-21/+19
Do variable name validation via the case labels rather than via PEs. This frees up the fallthrough case to simply ignore things we don't understand (and not exist). Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-15install/fsck: new install hook to add fsck and helpersDave Reisner1-0/+32
Provides /sbin/fsck and any helper binaries to the image. If processed after the autodetect hook, only the helper for the root FS is added. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-15fsck: implement basic fsck supportDave Reisner2-4/+70
This adds support for fsck'ing root at bootstrap if the fsck binary and necessary helpers are included. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-15init_functions: resolve M:m to device fileDave Reisner1-3/+19
Rather than immediately defaulting to /dev/root, attempt to resolve the major/minor pair back to a block device. If we can't do this properly, then fallback to /dev/root. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-15init_functions: generalize resolve_deviceDave Reisner1-41/+49
This allows a caller to pass in a device by name and get a /dev node returned. Note that this is heavily limited in that only the root device can be identified by major:minor. This might break init's API, if such a thing exists. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-15init_functions: move root resolution to separate functionDave Reisner1-1/+5
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-15init: use util-linux's /bin/mountDave Reisner2-13/+5
Providing this means we no longer need blkid for FS detection, as mount will do this for us. Adds a slight bloat to the image, in exchange for a huge convenience. Messaging is changed to assume that /bin/mount will provide useful feedback for us on failure. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-15autodetect: store rootfstype for use by other hooksDave Reisner1-1/+1
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-15init_functions: refactor poll_deviceDave Reisner1-11/+12
Beyond stylistic cleanup, add a conditional to ensure that we don't show the 'waiting for device' message if it already exists. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-15init: create /run/initramfs after mounting /runDave Reisner1-0/+1
We'll use this as a channel to communicate with later userspace. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-15init: don't tell the kernel about the path to modprobeDave Reisner1-2/+0
Remove this ancient relic. It's not been needed in a very long time. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-15Makefile: install binaries to /usr/binDave Reisner1-5/+4
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-15hooks/resume: Remove grep usageGerardo Exequiel Pozzi1-2/+2
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-11-15hooks/resume: Remove unused functionGerardo Exequiel Pozzi1-2/+0
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-11-13update bash completionDave Reisner1-5/+11
- change scavenging of /lib/modules to avoid grabbing extramodules dirs - add missing options for lsinitcpio and mkinitcpio - use _filedir for completing -b Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-30add_symlink: fix argument ordering and add_dir callTom Gundersen1-2/+2
Two bugs: operands were swapped in call to _add_symlink, and missing operand in call to _add_dir. Signed-off-by: Tom Gundersen <teg@jklm.no>
2011-10-25mkinitcpio: dereference symlinks when resolving kernverDave Reisner1-1/+1
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-22init_functions: avoid setting var without LHS0.7.5Dave Reisner1-0/+1
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-22init_functions: replace grep/sed with PEsDave Reisner1-12/+13
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-22init_functions: tighten up mount option gatheringDave Reisner1-26/+16
* Directly assign ro or rw to the rwopt rather than using readwrite as an intermediary * Use a default expansion to cut out an if block in determining the root fstype. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-22install/base: include new_root as part of build processDave Reisner2-2/+1
We always need this in early userspace, so add it as part of the build process instead of forking at runtime. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-20install/udev: relocate udevd for udev 174Dave Reisner3-5/+5
- usb_id and path_id are now builtin functionality of udevadm - /sbin/udevd moves to /lib/udev/udevd - update dev PKGBUILD to reflect version requirement Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-20manpage: correct section number in manpage headerDave Reisner1-1/+1
Missed this when I migrated the manpage in 5d635b6d. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-16install/pcmcia: fix syntax error (missing &&)Dave Reisner1-1/+1
Fixes FS#26427. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-16mkinitcpio: ensure get_kernver always returns a kverDave Reisner1-12/+17
- Always call this function. At worst, just return the current kver. - Do all our error reporting from within the function. - Add an additional check for existance prior to allow for a more appropriate error message when we encounter a situation such as /boot not being mounted. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-16mkinitcpio: avoid stomping on TMPDIR from the environmentDave Reisner3-12/+16
cc36db45 was a bit too strict about localizing variables and blew out TMPDIR, which might be a legit variable sourced from the calling environment. Restore this behavior with a bit of refactoring, and additionally add in a check to make sure the temporary directory is writeable before proceeding. Fixes FS#26373. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-16move manpage to section 8Dave Reisner2-7/+7
This is an admin command, not a config file. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-16init: refer to busybox by full path on --installDave Reisner1-1/+1
This is required for busybox 1.19. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-10install/base: grab usb-ehci udev rule to /lib0.7.4Dave Reisner2-2/+2
Done as part of FS#25788. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-09mkinitcpio: avoid using mountpointDave Reisner1-2/+4
As it turns out, the mountpoint toy from util-linux isn't really at feature parity with sysvinit's. In particular, and with respect to v2.20: - It throws false negatives when /proc isn't mounted. Rather, it should fall back on using stat(2), as is the basis for sysvinit's tool. - when /proc is mounted with as source of 'none', it segfaults on a null dereference. Patches have been sent upstream to resolve these issues, but in the meantime, we're mounting /dev and /proc for very specific reasons. Instead of relying on a fork/exec to figure out if these API FS's are mounted, use a simple bash test to see if these specific needs are available within the FS. One of many possible fixes for FS#26344. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-09[mkinitcpio] Add missing groups=('base') in PKGBUILDGerardo Exequiel Pozzi1-0/+1
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-10-09[mkinitcpio] Remove early redirection 2>/dev/null such node does not exists.Gerardo Exequiel Pozzi1-1/+1
An empty file will be created in any case, does not cause any harm, but for correctness. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-10-01Add a virtio hook0.7.3Sebastien Luttringer1-0/+15
This allow initcpio to boot vm which use virtio as network/disk backend. Signed-off-by: Sebastien Luttringer <seblu@seblu.net>
2011-10-01mkinitcpio: avoid creating savelist in main loopDave Reisner1-3/+3
If PRESET is set, we're in the main loop, not a worker process. No image will ever be created here, so there's never a need for saving any build dir. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-01example.preset: update for newer style syntaxDave Reisner1-8/+7
We don't suggest sourcing a .kver file anymore, and it can instead be a path to a kernel image. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-01remove duplicate "error" in error messageDave Reisner1-1/+1
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-01harden version generationFlorian Pritz2-5/+6
If you run make dist, extract that tarball somewhere else and try to run makepkg it will fail because it can't find the git tree anymore. [Dave: removed --dirty flag, as this breaks makepkg] Signed-off-by: Florian Pritz <bluewind@xinu.at>
2011-10-01init_functions: use constants on LHS of testsDave Reisner1-3/+3
If we encounter a BOOT_IMAGE var taken from grub2, the first character could be a '(' which will throw off busybox's parser and error out. Reverse the comparison so that the LHS is always a constant, which can be compared to anything (including nothing at all). Fixes FS#26119. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-01use correct variable to reference compression methodDave Reisner1-1/+1
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-01functions: fix output order in _add_symlinkDave Reisner1-1/+1
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-01lsinitcpio: follow symlinks only when necessaryDave Reisner1-2/+4
If the image we're pointing to is a symlink, show the resolution as part of the name in -a's output. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-01lsinitcpio: disable color when stdout isn't a ttyDave Reisner1-1/+1
This was a copypasta error when taking this from makepkg, which has special concerns in this regard. lsinitcpio should only concern itself with stdout. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-01init: allow /run to be mounted with exec permsDave Reisner1-1/+1
This is already done in initscripts so we mirror it here. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-01init: support breaks before and after mounting rootDave Reisner1-2/+8
Add in 'premount' and 'postmount' as trigger conditions, but also leave in the old 'y' value as a synonym for premount. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-01mkinitcpio: insist that /dev and /proc be mountedDave Reisner1-0/+4
This avoids errors with process substitutions in chroots, among other things. It's important that /proc be checked first as /etc/mtab might be a link to /proc/self/mounts. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-11-27 22:10:34 +0100