summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2011-01-31poll_device: Remove -hThomas Bächler1-2/+2
It seems ash follows symlinks with -b.
2011-01-31Enhance sleep hook to watch for device availabilityThomas Bächler2-2/+9
Add a sleepdevice= parameter that will watch for the specified device to appear and then move on. This is more flexible than a defined sleep period and prevents needless waiting if the device appears sooner. Original patch by: Dan McGee <dan@archlinux.org>
2011-01-31Keep an array of added modules to prevent expensive lookupsDan McGee1-5/+8
This saves a find and grep call for every module that is added more than once, which can lead to significant savings in image generation time. Generating a fallback image went from 80 seconds to 60 seconds after this patch. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-31Add bash in_array functionDan McGee1-0/+15
This is what we currently use in makepkg for the same purpose. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-31Short circuit add module if it already exists in imageDan McGee1-1/+6
Rather than go through all the hoops, check if the module has already been added by looking for its file path and skip the addition early if we can. This helps especially in modules with many recursive dependencies, and is most noticable when generating a full image with many modules. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-31Use new helper functions instead of system commandsDan McGee3-19/+20
Replace all of the repeated calls to dirname and basename with our new replacments. Also replace the 'grep ... /dev/null' idiom with calls to 'grep -q', which does exactly what we want. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-31Use new get_module_name functionDan McGee1-7/+4
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-31Add new helper functionsDan McGee1-0/+22
Replace common behavior we had in some other places with get_module_name, and add some basename/dirname replacements done in bash to avoid the forks for the number of times we call these functions. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-31Move output functions to top of functions fileDan McGee1-4/+3
This makes a bit more organizational sense to keep these first before we dive into the more complicated functions. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-26Release version 0.6.80.6.8Thomas Bächler1-1/+1
2011-01-25Support .ko.gz kernel modules, in addition to .koThomas Bächler2-6/+9
We used to expect only .ko as a kernel module name. Also accept .ko.gz, so we can reduce the installed size of the kernel26 package.
2011-01-12If filesystem autodetection fails, use all_modules instead of checked_modulesThomas Bächler2-2/+13
2011-01-12filesystems: remove cp437, it is added as an extra module whenever fat is usedThomas Bächler1-1/+1
2011-01-12autodetect: only probe the root deviceThomas Bächler1-4/+7
2010-12-06mount: forbid suid,exec,dev from /proc and /sysTom Gundersen1-2/+2
This is the counterpart to a similar patch to initscripts, making sure that the change applies regardless of whether initrd is used. Thanks to David Reisner for pointing out that this was needed.
2010-08-21Do not include everything from /block/ in the SCSI hook.Thomas Bächler1-1/+1
Fixes FS#19666
2010-07-12mkinitcpio: mount real root device instead of symlinkDave Reisner1-0/+3
If a symlink such as /dev/disk/by-uuid/xxxxx is provided on the kernel cmdline, resolve it and mount that device instead of the symlink. This prevents some ugliness in the output of commands such as mount or df. Signed-off-by: Dave Reisner <d@falconindy.com>
2010-07-11Release 0.6.70.6.7Thomas Bächler1-1/+2
2010-07-05Merge branch 'btrfs' of http://github.com/heftig/mkinitcpio into workingThomas Bächler4-24/+42
2010-06-26Add back /dev/{zero,null,mem} to the initramfs imageThomas Bächler1-0/+3
These devices might be actually needed before (dev)tmpfs is mounted, for example when uvesafb is built into the kernel (no module). By creating them in the image, they will be present as soon as initramfs has been extracted. Fixes https://bugs.archlinux.org/task/19903.
2010-06-23memdisk: add 01-memdisk.rules to Makefile, use the correct path in ↵Thomas Bächler2-1/+2
install/memdisk
2010-06-23memdisk: add UUID and label symlinks to udev ruleThomas Bächler1-1/+11
2010-06-23memdisk: Add udev ruleThomas Bächler2-0/+2
This rule creates /dev/memdisk if a memdisk has been found.
2010-06-23Add memdisk hookThomas Bächler2-0/+30
This hook creates a block device for virtual disks created by memdisk (http://syslinux.zytor.com/wiki/index.php/MEMDISK).
2010-06-19Simple Btrfs hookJan Steffens2-0/+23
All it does for now is cause a Btrfs scan so we can mount multi-device volumes.
2010-06-19sed cleanupJan Steffens1-4/+4
Replace some seds with tr and bash pattern removal
2010-06-19Implement explicit module dependsJan Steffens2-18/+16
Needed to get libcrc32c and therefore btrfs to work. Also remove the equivalent section in autodetect, which wasn't working anyway.
2010-06-19Fix autodetect bitrotJan Steffens1-6/+3
This error went unnoticed after auto_modules was switched over to resolve-modalias. As a result, ata_generic and ide-generic weren't filtered anymore.
2010-06-19Release 0.6.60.6.6Thomas Bächler1-1/+1
2010-06-10Create /dev/{null,zero,mem,console} devices when devtmpfs is missingThomas Bächler2-3/+6
These devices used to be present because they were added in the image. Since we now mount {dev,}tmpfs early in initramfs, the devices from the image will be invisible. In the tmpfs-case, create the devices manually so everything will be in order until udev is started, or if udev isn't used at all.
2010-06-03Release 0.6.50.6.5Thomas Bächler1-1/+1
2010-06-03udev hook: Add ata_id, path_id, scsi_id and usb_id to allow complete ↵Thomas Bächler1-1/+1
persistent storage rules
2010-06-03udev hook: Add --action=add to udevadm triggerThomas Bächler1-1/+1
2010-06-03Mount tmpfs or (if supported) devtmpfs on /dev, move it into the real root ↵Thomas Bächler1-0/+6
before switch_root
2010-06-03Do not umount /proc and /sys before switch_root, but mount --move them into ↵Thomas Bächler1-2/+2
the real root
2010-05-08Release 0.6.40.6.4Thomas Bächler1-1/+1
2010-05-08Add dmesg hookThomas Bächler2-0/+23
2010-05-08Port 83ef38409182a9c024809553dff8c872902d0889 to init_functions too, to ↵Thomas Bächler1-1/+1
remove more eval hacks
2010-05-08Allow usage of non-utf8 fonts in the consolefont hook, see FS#19109Thomas Bächler2-4/+14
Patch was provided by Mark (voidzero) in https://bugs.archlinux.org/task/19109 This requires busybox commit http://git.busybox.net/busybox/commit/?id=8ce1dc03c1b2b61e51527b987579c09c991cc4b2 which is in the 1.7 branch, a backport will be included in an updated mkinitcpio-busybox package
2010-05-08Change how autodetect hook lookup for filesystemsGerardo Exequiel Pozzi1-1/+1
In this way, remove eval hacks and enviroments vars, just use blkid syntax. I guess in this way will fix/hide "command not found" when fstype is not property setup in fs, reported by some users. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-02-22Add 'sleep' hookThomas Bächler2-0/+28
2010-02-21Release 0.6.30.6.3Thomas Bächler1-1/+1
2010-02-21poll_device: do not wait for a device to appear if udevd is not runningThomas Bächler2-5/+10
Devices will never "magically" appear when udevd is not running. Thus, poll_device now exits instantly when a device when udevd is not running. The return value is unchanged, just the delay is removed. Assuming that the drive is available just after loading the module is unsafe. However, "fast" devices like most (all?) pata/sata seem to work this way for many people. On "slow" devices like USB, we still have to wait - those will not work without udev.
2010-02-21Allow the second parameter of poll_device to be 0 - this fixes rootdelay=0Thomas Bächler1-1/+1
2010-02-20default_mount_hook: Use major and minor variables instead of a single ↵Thomas Bächler1-7/+9
rootdev variable This is nicer and more explicit than before, based on a patch by Benjamin Richter
2010-02-20load-modules.sh: Always use --use-blacklistThomas Bächler1-1/+1
This matches the change from http://repos.archlinux.org/wsvn/packages/?op=comp&compare[]=%2Fudev%2Ftrunk@68711&compare[]=%2Fudev%2Ftrunk@69509
2010-02-20Use $(( )) instead of printf "%d"Benjamin Richter1-2/+2
2010-02-20Cosmetic change: 'msg' function does not support '\n'Thomas Bächler1-1/+1
2010-02-20Use only a single loop for searching /sys/blockBenjamin Richter1-12/+8
2010-02-19Fix typo in 01cfe5572f6cfc172dddc013494511a59a7ed85fThomas Bächler1-1/+1
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-11-04 04:15:08 +0100