summaryrefslogtreecommitdiffstats
path: root/install
AgeCommit message (Collapse)AuthorFilesLines
2011-10-16install/pcmcia: fix syntax error (missing &&)Dave Reisner1-1/+1
Fixes FS#26427. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-16mkinitcpio: avoid stomping on TMPDIR from the environmentDave Reisner1-1/+1
cc36db45 was a bit too strict about localizing variables and blew out TMPDIR, which might be a legit variable sourced from the calling environment. Restore this behavior with a bit of refactoring, and additionally add in a check to make sure the temporary directory is writeable before proceeding. Fixes FS#26373. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-10install/base: grab usb-ehci udev rule to /lib0.7.4Dave Reisner1-1/+1
Done as part of FS#25788. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-01Add a virtio hook0.7.3Sebastien Luttringer1-0/+15
This allow initcpio to boot vm which use virtio as network/disk backend. Signed-off-by: Sebastien Luttringer <seblu@seblu.net>
2011-09-27functions: allow ignoring errors on module additionDave Reisner9-13/+12
We conditionally, but naively, add modules in some of our install hooks, but the kernel may not have these. Note that these modules can fail silently by detecting a '?' suffix on the module name. In conjunction with this, the add_module function now takes a flag, -t or --try, which will ignore module not found errors from modinfo. The config file will also support this syntax. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-27base: remove superfluous leading /Dave Reisner1-1/+1
The doubled up leading slashes annoy me in the verbose output. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-27cleanup and bashify install hooksDave Reisner17-266/+220
No logical code changes -- this is purely a syntactical cleanup and standardization across the build hooks along with ensuring that help messages are wrapped to 80 columns or less. All hooks get the same treatment, adhering to the following style: #!/bin/bash build() { COMMANDS } help() { cat <<HELPEOF This is a help message. HELPEOF } # vim: set ft=sh ts=4 sw=4 et: Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-27keymap: simplify unicode detectionDave Reisner1-5/+3
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-24keymap/consolefont: source rc.conf properly from $BASEDIRDave Reisner2-29/+37
This is partially in response to FS#24685, which should hopefully cut back on configuration duplication on non-sysvinit systems. This does, however, also fix a bug with keymap/consolefont pulling the wrong rc.conf when BASEDIR is not '/' or unset. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-24install/consolefont: cleanup and refactorDave Reisner1-25/+27
* Provide support for uncompressed font files as well as compressed * Avoiding using an unnecessary temp file * Support $BASEDIR * Warn when no font is found * Only add the runtime hook if a font is added Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-09autodetect: add verbose feedback on autodetect successDave Reisner1-0/+4
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-05autodetect: check for /sys/devices before autodetectingDave Reisner1-2/+2
Oops. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-02base/install: rewrite the config to sanitize itDave Reisner1-2/+15
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-06-30install/keymap: fix installation ($buildroot -> $BUILDROOT)Thomas Bächler1-4/+4
2011-06-27install/base: use private API call to add configDave Reisner1-1/+3
We can't let add_file get its hands on the config file, because we need to be sure that an absolute path is honored. As a side effect, ensure that $BASEDIR is appended to the config file during preset processing. Thanks-to: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar> Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-06-26install/autodetect: refactor and simplify hookDave Reisner2-77/+39
Bashify and refactor to cut back on unnecessary churn. Since our {all,checked}_modules functions always return clean module names, we can add these directly to the autodetect file instead of aggregating them during the autodetect hook and then cleansing one at a time. There's a small speed increase here for the simplest code path. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-06-25Fix some install hooks due recent change in all_modules()Gerardo Exequiel Pozzi4-4/+4
[fw] Avoid inclusion of kernel/sound/firewire [pcmcia] Avoid inclusion of kernel/sound/pcmcia [usb] and [usbinput] Avoid inclusion of ignored modules (via grep cmd) Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-06-25install/{sata,pata,scsi}: cleanup and simplifyDave Reisner3-60/+41
* Use loops where possible for module addition * remove superfluous trim operation * remove antiquated filters for modules which do not exist Signed-off-by: Dave Reisner <d@falconindy.com>
2011-06-25install/base: cleanup and simplifyDave Reisner1-22/+12
* Create only the directories that are necessary. If others are needed, they'll be created along the way. As part of this, we create /new_root sooner in init, so it's less jarring to the user if they request a break. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-06-25remove support for -m to add a startup messageDave Reisner1-4/+0
Signed-off-by: Dave Reisner <d@falconindy.com>
2011-06-19install/keymap: refactor and bashifyDave Reisner1-23/+16
Write directly to the build root rather than creating temp files to be added later on. Also cleanup syntax to Bash standards. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-06-19overhaul output, introducing colorDave Reisner1-2/+2
Output style and coloring is borrowed from makepkg with minor adjustments. Most instances where we encounter fatal errors are replaced with a 'die' function to wrap this up neatly. In addition, we introduce the -n flag, for no-color. As a side effect, we need to source the functions file earlier so we have the output functions available earlier. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-06-16functions: remove add_deviceDave Reisner1-5/+0
This was only ever used in the base layout, and it's not needed. devices will be present if we're using devtmpfs, and created for us by init if we mount on tmpfs. Also, this is part of our move towards using bsdcpio instead of gen_init_cpio, and as a side effect we can no longer support this. Any devices that need to be created should be done so by the runtime hooks, not the install time hooks. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-06-16dmesg: remove install/hookDave Reisner1-19/+0
This should be set via the loglevel= parameter on the kernel cmdline. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-06-16mkinitcpio: deprecate install() in install hooksDave Reisner21-22/+24
This is an unfortunate name clash with a common utility and should be avoided. Rename the install function to 'build' and warn the user when we discover a hook using an 'install' function. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-06-02Remove load-modules.sh. Requires the udev 171-2 package.Thomas Bächler1-1/+0
2011-04-08Introduce /runThomas Bächler1-0/+1
Mount /run as a 10MB tmpfs with 1777 permissions early. Move it to /new_root when switching.
2011-03-27Simplify root file system detectionThomas Bächler1-2/+1
Instead of calling blkid, get the file system type directly from findmnt. Fixes FS#23100.
2011-02-06remove loop from btrfs again, not neededTobias Powalowski1-1/+1
2011-02-06add loop module to avoid error messages from btrfs device scanTobias Powalowski1-1/+1
2011-02-06add DAC960 scsi module to scsi hook againTobias Powalowski1-1/+1
2011-01-31Enhance sleep hook to watch for device availabilityThomas Bächler1-0/+3
Add a sleepdevice= parameter that will watch for the specified device to appear and then move on. This is more flexible than a defined sleep period and prevents needless waiting if the device appears sooner. Original patch by: Dan McGee <dan@archlinux.org>
2011-01-31Use new helper functions instead of system commandsDan McGee1-2/+1
Replace all of the repeated calls to dirname and basename with our new replacments. Also replace the 'grep ... /dev/null' idiom with calls to 'grep -q', which does exactly what we want. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-25Support .ko.gz kernel modules, in addition to .koThomas Bächler1-2/+3
We used to expect only .ko as a kernel module name. Also accept .ko.gz, so we can reduce the installed size of the kernel26 package.
2011-01-12If filesystem autodetection fails, use all_modules instead of checked_modulesThomas Bächler2-2/+13
2011-01-12filesystems: remove cp437, it is added as an extra module whenever fat is usedThomas Bächler1-1/+1
2011-01-12autodetect: only probe the root deviceThomas Bächler1-4/+7
2010-08-21Do not include everything from /block/ in the SCSI hook.Thomas Bächler1-1/+1
Fixes FS#19666
2010-07-05Merge branch 'btrfs' of http://github.com/heftig/mkinitcpio into workingThomas Bächler2-17/+19
2010-06-26Add back /dev/{zero,null,mem} to the initramfs imageThomas Bächler1-0/+3
These devices might be actually needed before (dev)tmpfs is mounted, for example when uvesafb is built into the kernel (no module). By creating them in the image, they will be present as soon as initramfs has been extracted. Fixes https://bugs.archlinux.org/task/19903.
2010-06-23memdisk: add 01-memdisk.rules to Makefile, use the correct path in ↵Thomas Bächler1-1/+1
install/memdisk
2010-06-23memdisk: Add udev ruleThomas Bächler1-0/+1
This rule creates /dev/memdisk if a memdisk has been found.
2010-06-23Add memdisk hookThomas Bächler1-0/+19
This hook creates a block device for virtual disks created by memdisk (http://syslinux.zytor.com/wiki/index.php/MEMDISK).
2010-06-19Simple Btrfs hookJan Steffens1-0/+16
All it does for now is cause a Btrfs scan so we can mount multi-device volumes.
2010-06-19Implement explicit module dependsJan Steffens1-13/+2
Needed to get libcrc32c and therefore btrfs to work. Also remove the equivalent section in autodetect, which wasn't working anyway.
2010-06-19Fix autodetect bitrotJan Steffens1-6/+3
This error went unnoticed after auto_modules was switched over to resolve-modalias. As a result, ata_generic and ide-generic weren't filtered anymore.
2010-06-10Create /dev/{null,zero,mem,console} devices when devtmpfs is missingThomas Bächler1-3/+0
These devices used to be present because they were added in the image. Since we now mount {dev,}tmpfs early in initramfs, the devices from the image will be invisible. In the tmpfs-case, create the devices manually so everything will be in order until udev is started, or if udev isn't used at all.
2010-06-03udev hook: Add ata_id, path_id, scsi_id and usb_id to allow complete ↵Thomas Bächler1-1/+1
persistent storage rules
2010-05-08Add dmesg hookThomas Bächler1-0/+18
2010-05-08Allow usage of non-utf8 fonts in the consolefont hook, see FS#19109Thomas Bächler1-4/+8
Patch was provided by Mark (voidzero) in https://bugs.archlinux.org/task/19109 This requires busybox commit http://git.busybox.net/busybox/commit/?id=8ce1dc03c1b2b61e51527b987579c09c991cc4b2 which is in the 1.7 branch, a backport will be included in an updated mkinitcpio-busybox package