summaryrefslogtreecommitdiffstats
path: root/install
AgeCommit message (Collapse)AuthorFilesLines
2012-01-13autodetect: try to find /usr partition fstypeDave Reisner1-2/+11
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-01-13base: add findmnt as a part of the base layoutDave Reisner2-1/+2
This is required for mounting a separate /usr. While the shutdown hook is essentially a soft requirement for a separate /usr, we shouldn't break init. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-01-13udev: update for udev 176Dave Reisner1-2/+2
- firmware handling is now a udevd builtin - udevadm may move -- let a path lookup find it Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-01-12dsdt: remove hook. this has been defunct for yearsDave Reisner1-14/+0
Refer to commit 9a9e0d68555 in the kernel where Linus removes this and says "to be revisited later". The only option (currently) is to built this into your kernel image. Suggested by FS#27906. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-01-05shutdown: add new hook0.8.1Dave Reisner1-0/+17
This adds functionality to pivot to back to the initramfs on shutdown, thereby allowing the system to unmount the real root device. This will be necessary for anyone with /usr as a separate partition.
2012-01-05autodetect: check for rootfs module existanceDave Reisner1-1/+6
Avoiding adding a filesystem module to the whitelist when it doesn't actually exist as a module (in case its compiled in staticly). Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-01-05mkinitcpio: remove hardcoded pathsDave Reisner1-2/+2
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-29busybox: create symlinks manuallyTom Gundersen1-0/+5
This means that no "setup" of the initramfs is requried on boot, and this should make testing a lot eaiser by just chrooting into the ramfs to check if it works. Signed-off-by: Tom Gundersen <teg@jklm.no>
2011-11-29move all binaries to /usr/binTom Gundersen1-1/+5
Add compat symlinks from /bin, /sbin and /usr/sbin, so nothing is lost. This will make sure that it is not possibly to install two different versions of the same binary in PATH. The main usecase of this is that we want to be able to override any symlink provided by busybox by adding a binary by the same name. With this patch we don't have to worry in case the busybox symlink and the binary we add are in different directories; the last binary to be added always takes precedence. Signed-off-by: Tom Gundersen <teg@jklm.no>
2011-11-29install/base: Add an empty fstabGerardo Exequiel Pozzi1-0/+3
This is mainly for avoid this: [ramfs /]# mount /dev/md0 /mnt/a [ramfs /]# mount -o bind /mnt/a /mnt/b [ramfs /]# mount -o bind,remount,ro /mnt/b warning: can't open /etc/fstab: No such file or directory [ramfs /]# Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-11-29hooks/net: Refactor and remove sed cmd usage.Gerardo Exequiel Pozzi1-1/+1
* ipconfig cmd writes a file in /tmp that is ready for direct evaluation. We can use this instead of parsing the output, to do this some variable renames are needed. * Add /tmp as part of "base" layout since this can be used by others hooks/cmds. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-11-15use util-linux's switch_root binaryDave Reisner1-0/+1
This is a much better solution than busybox's, as it will move our API filesystems and /run for us. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-15install/fsck: new install hook to add fsck and helpersDave Reisner1-0/+32
Provides /sbin/fsck and any helper binaries to the image. If processed after the autodetect hook, only the helper for the root FS is added. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-15init: use util-linux's /bin/mountDave Reisner1-0/+3
Providing this means we no longer need blkid for FS detection, as mount will do this for us. Adds a slight bloat to the image, in exchange for a huge convenience. Messaging is changed to assume that /bin/mount will provide useful feedback for us on failure. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-15autodetect: store rootfstype for use by other hooksDave Reisner1-1/+1
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-22install/base: include new_root as part of build processDave Reisner1-1/+1
We always need this in early userspace, so add it as part of the build process instead of forking at runtime. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-20install/udev: relocate udevd for udev 174Dave Reisner1-2/+2
- usb_id and path_id are now builtin functionality of udevadm - /sbin/udevd moves to /lib/udev/udevd - update dev PKGBUILD to reflect version requirement Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-16install/pcmcia: fix syntax error (missing &&)Dave Reisner1-1/+1
Fixes FS#26427. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-16mkinitcpio: avoid stomping on TMPDIR from the environmentDave Reisner1-1/+1
cc36db45 was a bit too strict about localizing variables and blew out TMPDIR, which might be a legit variable sourced from the calling environment. Restore this behavior with a bit of refactoring, and additionally add in a check to make sure the temporary directory is writeable before proceeding. Fixes FS#26373. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-10install/base: grab usb-ehci udev rule to /lib0.7.4Dave Reisner1-1/+1
Done as part of FS#25788. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-01Add a virtio hook0.7.3Sebastien Luttringer1-0/+15
This allow initcpio to boot vm which use virtio as network/disk backend. Signed-off-by: Sebastien Luttringer <seblu@seblu.net>
2011-09-27functions: allow ignoring errors on module additionDave Reisner9-13/+12
We conditionally, but naively, add modules in some of our install hooks, but the kernel may not have these. Note that these modules can fail silently by detecting a '?' suffix on the module name. In conjunction with this, the add_module function now takes a flag, -t or --try, which will ignore module not found errors from modinfo. The config file will also support this syntax. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-27base: remove superfluous leading /Dave Reisner1-1/+1
The doubled up leading slashes annoy me in the verbose output. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-27cleanup and bashify install hooksDave Reisner17-266/+220
No logical code changes -- this is purely a syntactical cleanup and standardization across the build hooks along with ensuring that help messages are wrapped to 80 columns or less. All hooks get the same treatment, adhering to the following style: #!/bin/bash build() { COMMANDS } help() { cat <<HELPEOF This is a help message. HELPEOF } # vim: set ft=sh ts=4 sw=4 et: Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-27keymap: simplify unicode detectionDave Reisner1-5/+3
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-24keymap/consolefont: source rc.conf properly from $BASEDIRDave Reisner2-29/+37
This is partially in response to FS#24685, which should hopefully cut back on configuration duplication on non-sysvinit systems. This does, however, also fix a bug with keymap/consolefont pulling the wrong rc.conf when BASEDIR is not '/' or unset. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-24install/consolefont: cleanup and refactorDave Reisner1-25/+27
* Provide support for uncompressed font files as well as compressed * Avoiding using an unnecessary temp file * Support $BASEDIR * Warn when no font is found * Only add the runtime hook if a font is added Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-09autodetect: add verbose feedback on autodetect successDave Reisner1-0/+4
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-05autodetect: check for /sys/devices before autodetectingDave Reisner1-2/+2
Oops. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-02base/install: rewrite the config to sanitize itDave Reisner1-2/+15
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-06-30install/keymap: fix installation ($buildroot -> $BUILDROOT)Thomas Bächler1-4/+4
2011-06-27install/base: use private API call to add configDave Reisner1-1/+3
We can't let add_file get its hands on the config file, because we need to be sure that an absolute path is honored. As a side effect, ensure that $BASEDIR is appended to the config file during preset processing. Thanks-to: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar> Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-06-26install/autodetect: refactor and simplify hookDave Reisner2-77/+39
Bashify and refactor to cut back on unnecessary churn. Since our {all,checked}_modules functions always return clean module names, we can add these directly to the autodetect file instead of aggregating them during the autodetect hook and then cleansing one at a time. There's a small speed increase here for the simplest code path. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-06-25Fix some install hooks due recent change in all_modules()Gerardo Exequiel Pozzi4-4/+4
[fw] Avoid inclusion of kernel/sound/firewire [pcmcia] Avoid inclusion of kernel/sound/pcmcia [usb] and [usbinput] Avoid inclusion of ignored modules (via grep cmd) Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-06-25install/{sata,pata,scsi}: cleanup and simplifyDave Reisner3-60/+41
* Use loops where possible for module addition * remove superfluous trim operation * remove antiquated filters for modules which do not exist Signed-off-by: Dave Reisner <d@falconindy.com>
2011-06-25install/base: cleanup and simplifyDave Reisner1-22/+12
* Create only the directories that are necessary. If others are needed, they'll be created along the way. As part of this, we create /new_root sooner in init, so it's less jarring to the user if they request a break. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-06-25remove support for -m to add a startup messageDave Reisner1-4/+0
Signed-off-by: Dave Reisner <d@falconindy.com>
2011-06-19install/keymap: refactor and bashifyDave Reisner1-23/+16
Write directly to the build root rather than creating temp files to be added later on. Also cleanup syntax to Bash standards. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-06-19overhaul output, introducing colorDave Reisner1-2/+2
Output style and coloring is borrowed from makepkg with minor adjustments. Most instances where we encounter fatal errors are replaced with a 'die' function to wrap this up neatly. In addition, we introduce the -n flag, for no-color. As a side effect, we need to source the functions file earlier so we have the output functions available earlier. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-06-16functions: remove add_deviceDave Reisner1-5/+0
This was only ever used in the base layout, and it's not needed. devices will be present if we're using devtmpfs, and created for us by init if we mount on tmpfs. Also, this is part of our move towards using bsdcpio instead of gen_init_cpio, and as a side effect we can no longer support this. Any devices that need to be created should be done so by the runtime hooks, not the install time hooks. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-06-16dmesg: remove install/hookDave Reisner1-19/+0
This should be set via the loglevel= parameter on the kernel cmdline. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-06-16mkinitcpio: deprecate install() in install hooksDave Reisner21-22/+24
This is an unfortunate name clash with a common utility and should be avoided. Rename the install function to 'build' and warn the user when we discover a hook using an 'install' function. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-06-02Remove load-modules.sh. Requires the udev 171-2 package.Thomas Bächler1-1/+0
2011-04-08Introduce /runThomas Bächler1-0/+1
Mount /run as a 10MB tmpfs with 1777 permissions early. Move it to /new_root when switching.
2011-03-27Simplify root file system detectionThomas Bächler1-2/+1
Instead of calling blkid, get the file system type directly from findmnt. Fixes FS#23100.
2011-02-06remove loop from btrfs again, not neededTobias Powalowski1-1/+1
2011-02-06add loop module to avoid error messages from btrfs device scanTobias Powalowski1-1/+1
2011-02-06add DAC960 scsi module to scsi hook againTobias Powalowski1-1/+1
2011-01-31Enhance sleep hook to watch for device availabilityThomas Bächler1-0/+3
Add a sleepdevice= parameter that will watch for the specified device to appear and then move on. This is more flexible than a defined sleep period and prevents needless waiting if the device appears sooner. Original patch by: Dan McGee <dan@archlinux.org>
2011-01-31Use new helper functions instead of system commandsDan McGee1-2/+1
Replace all of the repeated calls to dirname and basename with our new replacments. Also replace the 'grep ... /dev/null' idiom with calls to 'grep -q', which does exactly what we want. Signed-off-by: Dan McGee <dan@archlinux.org>
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-12-25 16:16:23 +0100