Age | Commit message (Collapse) | Author | Files | Lines |
|
Since 3b18c9cd we have a blank /etc/fstab in the image. This is also
forward thinking for the next release of util-linux (2.22), where fsck
complains loudly about my filthy hack of using /dev/null as /etc/fstab.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
sysfs contains enough information about block devices to be able to
determine the order of stacked devices such as lvm, raid, or crypto. By
looking at the device symlinks from the holders/ attributes of a block
device, we can walk down each device chain until we reach the most
descendant device.
For each of these devices at the end of a chain, detect its type and
perform the appropriate action to disassemble it. Then, walk back up the
device chain, disassembling each parent device.
To save ourselves some pain and make sure we're fairly accurate, lsblk
is brought in for detection of device types.
Thanks-To: Florian Pritz <bluewind@xinu.at>
Thanks-To: Tom Gundersen <teg@jklm.no>
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
This is implemented for the keymap and consolefont hooks. It's done in
such a way that vconsole.conf and locale.conf will override and
supplement rc.conf.
Implements FS#29022.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
This is a really ugly patch, but allows mkinitcpio to read hooks from
multiple locations, namely:
/usr/lib/initcpio/{install,hooks}
/lib/initcpio/{install,hooks}
Preference is given to the first, and all files included with mkinitcpio
are moved there.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
e2fsprogs makes a lot of hardlinks for its fsck tools. If ext[234] is
detected, add the fsck.ext4 binary and add symlinks.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Make the logic similar to how we treat usrfstype.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Behavior changed in util-linux commit 2f1ac44b4b.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Trading out modinfo for modprobe allows us to detect filesystems like
ext2 and ext3 which might be aliased to ext4 in the case of Kconfig
CONFIG_EXT4_USE_FOR_EXT23 being enabled. Maybe this catches other insane
corner cases, too.
Since we now treat this as possible aliases, we also need to be mindful
of the fact that it could resolve to multiple module names. Assign the
output as an array to respect this.
Fixes FS#28569.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
FS#10061 still isn't dead, its just resting:
https://bbs.archlinux.org/viewtopic.php?pid=1056003
An strace from a helpful user shows that our mdadm call is trying to
open a block device and the call never returns:
open("/dev/sdb", O_RDONLY|O_DIRECT|O_LARGEFILE
Fix this by only scanning explicitly the block devices we're interested
in, found via sysfs. This is an all around win for everyone, especially
users who have mdadm installed without any need for it.
This changes some of our assumptions about the environment:
- the mdadm binary exists when we find md devices in /sys
- the user running mkinitcpio isn't any specific UID or part of any
particular group, but merely has read access to the block devices
we're about to scan.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
These should belong to the udev package.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
In particular, skipping ata-generic causes some macbooks to not boot.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
This makes us more resilient against path changes -- add_binary is smart
enough to resolve the path for us.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Install kmod in /usr/bin and provide symlinks for all the applets to the
kmod multi-call.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
This is required for mounting a separate /usr. While the shutdown hook
is essentially a soft requirement for a separate /usr, we shouldn't
break init.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
- firmware handling is now a udevd builtin
- udevadm may move -- let a path lookup find it
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Refer to commit 9a9e0d68555 in the kernel where Linus removes this and
says "to be revisited later". The only option (currently) is to built
this into your kernel image.
Suggested by FS#27906.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
This adds functionality to pivot to back to the initramfs on shutdown,
thereby allowing the system to unmount the real root device. This will
be necessary for anyone with /usr as a separate partition.
|
|
Avoiding adding a filesystem module to the whitelist when it doesn't
actually exist as a module (in case its compiled in staticly).
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
This means that no "setup" of the initramfs is requried on boot,
and this should make testing a lot eaiser by just chrooting into
the ramfs to check if it works.
Signed-off-by: Tom Gundersen <teg@jklm.no>
|
|
Add compat symlinks from /bin, /sbin and /usr/sbin, so nothing is lost.
This will make sure that it is not possibly to install two different
versions of the same binary in PATH.
The main usecase of this is that we want to be able to override any
symlink provided by busybox by adding a binary by the same name. With
this patch we don't have to worry in case the busybox symlink and the
binary we add are in different directories; the last binary to be added
always takes precedence.
Signed-off-by: Tom Gundersen <teg@jklm.no>
|
|
This is mainly for avoid this:
[ramfs /]# mount /dev/md0 /mnt/a
[ramfs /]# mount -o bind /mnt/a /mnt/b
[ramfs /]# mount -o bind,remount,ro /mnt/b
warning: can't open /etc/fstab: No such file or directory
[ramfs /]#
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* ipconfig cmd writes a file in /tmp that is ready for direct evaluation.
We can use this instead of parsing the output, to do this some variable
renames are needed.
* Add /tmp as part of "base" layout since this can be used by others hooks/cmds.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
This is a much better solution than busybox's, as it will move our API
filesystems and /run for us.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Provides /sbin/fsck and any helper binaries to the image. If processed
after the autodetect hook, only the helper for the root FS is added.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Providing this means we no longer need blkid for FS detection, as mount
will do this for us. Adds a slight bloat to the image, in exchange for a
huge convenience. Messaging is changed to assume that /bin/mount will
provide useful feedback for us on failure.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
We always need this in early userspace, so add it as part of the build
process instead of forking at runtime.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
- usb_id and path_id are now builtin functionality of udevadm
- /sbin/udevd moves to /lib/udev/udevd
- update dev PKGBUILD to reflect version requirement
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Fixes FS#26427.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
cc36db45 was a bit too strict about localizing variables and blew out
TMPDIR, which might be a legit variable sourced from the calling
environment. Restore this behavior with a bit of refactoring, and
additionally add in a check to make sure the temporary directory is
writeable before proceeding.
Fixes FS#26373.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Done as part of FS#25788.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
This allow initcpio to boot vm which use virtio as network/disk backend.
Signed-off-by: Sebastien Luttringer <seblu@seblu.net>
|
|
We conditionally, but naively, add modules in some of our install hooks,
but the kernel may not have these. Note that these modules can fail
silently by detecting a '?' suffix on the module name. In conjunction with
this, the add_module function now takes a flag, -t or --try, which will
ignore module not found errors from modinfo. The config file will also
support this syntax.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
The doubled up leading slashes annoy me in the verbose output.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
No logical code changes -- this is purely a syntactical cleanup and
standardization across the build hooks along with ensuring that help
messages are wrapped to 80 columns or less. All hooks get the same
treatment, adhering to the following style:
#!/bin/bash
build() {
COMMANDS
}
help() {
cat <<HELPEOF
This is a help message.
HELPEOF
}
# vim: set ft=sh ts=4 sw=4 et:
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
This is partially in response to FS#24685, which should hopefully cut
back on configuration duplication on non-sysvinit systems. This does,
however, also fix a bug with keymap/consolefont pulling the wrong
rc.conf when BASEDIR is not '/' or unset.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
* Provide support for uncompressed font files as well as compressed
* Avoiding using an unnecessary temp file
* Support $BASEDIR
* Warn when no font is found
* Only add the runtime hook if a font is added
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Oops.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
|
|
We can't let add_file get its hands on the config file, because we need
to be sure that an absolute path is honored. As a side effect, ensure
that $BASEDIR is appended to the config file during preset processing.
Thanks-to: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Bashify and refactor to cut back on unnecessary churn. Since our
{all,checked}_modules functions always return clean module names, we can
add these directly to the autodetect file instead of aggregating them
during the autodetect hook and then cleansing one at a time. There's a
small speed increase here for the simplest code path.
Signed-off-by: Dave Reisner <d@falconindy.com>
|
|
[fw]
Avoid inclusion of kernel/sound/firewire
[pcmcia]
Avoid inclusion of kernel/sound/pcmcia
[usb] and [usbinput]
Avoid inclusion of ignored modules (via grep cmd)
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|