Code tidying up. Renamed mobile connection to mobile-ppp.

Also:
- Replaced echos with invocations of cat, where possible.
- Fixed PIDFILE to point to the file ppp creates. This ensures the
  interface can be brought down.
- Fixed setting of InterfaceRoot.
- Removed vim syntax highlighting from ethernet connection.

1 files changed, 0 insertions, 148 deletions

diff --git a/src/lib/connections/ppp b/src/lib/connections/ppp
deleted file mode 100644
index 54bedba..0000000
--- a/src/lib/connections/ppp
+++ /dev/null
@@ -1,148 +0,0 @@
-# Contributed by Robbie Smith <zoqaeski@gmail.com>
-# Based on Thomas Bächler’s <thomas@archlinux.org> pppoe script
-# Also see <https://wiki.archlinux.org/index.php/3G_and_GPRS_modems_with_pppd> for more information.
-
-: ${PPPD:=pppd}
-
-_quotestring() {
-    echo "\"${1/\"/\\\"}\""
-}
-
-mobile_up() {
-    local cfg
-    local chat
-
-    mkdir -p "$STATE_DIR/mobile.${Interface}.${Profile}/"
-    chmod 700 "$STATE_DIR/mobile.${Interface}.${Profile}/"
-    cfg="$STATE_DIR/mobile.${Interface}.${Profile}/options"
-    chat="$STATE_DIR/mobile.${Interface}.${Profile}/modem.chat"
-    : > "${cfg}"
-    chmod 600 "${cfg}"
-
-    echo "linkname $(_quotestring "${Profile}")" >> "${cfg}"
-
-    # Set device
-    if [ -n "${Device}" ]; then
-        echo "${Device}" >> "${cfg}"
-    else
-        echo "ttyUSB0" >> "${cfg}"
-    fi
-
-    echo "921600" >> "${cfg}"
-    echo "lock" >> "${cfg}"
-    echo "crtscts" >> "${cfg}"
-    echo "modem" >> "${cfg}"
-    echo "passive" >> "${cfg}"
-    echo "novj" >> "${cfg}"
-    echo "holdoff 10" >> "${cfg}"
-    echo "maxfail 5" >> "${cfg}"
-
-    # Debug pppd output separately from netcfg
-    if is_yes "${PPPDebug:-yes}"; then
-        echo "debug" >> "${cfg}"
-    fi
-
-    # Sets up route
-    if is_yes "${DefaultRoute:-yes}"; then
-        echo "defaultroute" >> "${cfg}"
-    else
-        echo "nodefaultroute" >> "${cfg}"
-    fi
-    if is_yes "${UsePeerDNS:-yes}"; then
-        echo "usepeerdns" >> "${cfg}"
-    fi
-
-    # Writes username and password
-    echo "noauth" >> "${cfg}"
-    echo "hide-password" >> ${cfg}
-    [[ -n ${User} ]] && echo "user $(_quotestring "${User}")" >> "${cfg}"
-    [[ -n ${Password} ]] && echo "password $(_quotestring "${Password}")" >> "${cfg}"
-
-    # Now that we’ve got the ppp configuration set up, write the chat script
-    echo "ECHO ON" >> "${chat}"
-    echo "ABORT 'BUSY'" >> "${chat}"
-    echo "ABORT 'NO CARRIER'" >> "${chat}"
-    echo "ABORT 'VOICE'" >> "${chat}"
-    echo "ABORT 'NO DIALTONE'" >> "${chat}"
-    echo "ABORT 'NO DIAL TONE'" >> "${chat}"
-    echo "ABORT 'NO ANSWER'" >> "${chat}"
-    echo "ABORT 'DELAYED'" >> "${chat}"
-    echo "ABORT   '\nRINGING\r\n\r\nRINGING\r'" >> "${chat}"
-    echo "REPORT CONNECT" >> "${chat}"
-    echo "TIMEOUT 6" >> "${chat}"
-    echo "'' 'ATQ0'" >> "${chat}"
-    echo "'OK-AT-OK' 'ATZ'" >> "${chat}"
-    echo "TIMEOUT 3" >> "${chat}"
-
-    #echo "'OK' @/etc/ppp/chatscripts/pin" >> "${chat}"
-    if [ -n "${Pin}" ]; then
-        echo "'OK' 'AT+CPIN=${Pin}'" >> "${chat}"
-    else
-        echo "'OK' 'AT'" >> "${chat}"
-    fi
-
-    echo "'OK\d-AT-OK' 'ATI'" >> "${chat}"
-    echo "'OK' 'ATZ'" >> "${chat}"
-    echo "'OK' 'ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0'" >> "${chat}"
-
-    # Mode can be one of 3Gpref, 3Gonly, GPRSpref, GPRSonly, None
-    # Only works for Huawei modems
-    #echo "'OK' @/etc/ppp/chatscripts/mode" >> "${chat}"
-    case "${Mode}" in
-        3Gonly)
-            echo "'OK' 'AT\^SYSCFG=14,2,3fffffff,0,1'" >> "${chat}"
-            ;;
-        3Gpref)
-            echo "'OK' 'AT\^SYSCFG=2,2,3fffffff,0,1'" >> "${chat}"
-            ;;
-        GPRSonly)
-            echo "'OK' 'AT\^SYSCFG=13,1,3fffffff,0,0'" >> "${chat}"
-            ;;
-        GPRSpref)
-            echo "'OK' 'AT\^SYSCFG=2,1,3fffffff,0,0'" >> "${chat}"
-            ;;
-        *)
-            echo "'OK' 'AT'" >> "${chat}"
-            ;;
-    esac
-
-    # Set up Access Point Name
-    echo "'OK-AT-OK' AT+CGDCONT=1,\"IP\",\"${AccessPointName}\"" >> "${chat}"
-
-    echo "'OK' 'ATDT*99#'" >> "${chat}"
-    echo "TIMEOUT 30" >> "${chat}"
-    echo "CONNECT ''" >> "${chat}"
-
-    # Add the chat script line to the configuration
-    echo "connect \"/usr/sbin/chat -v -t15 -f ${chat}\"" >> "${cfg}"
-
-    ip link set dev "${Interface}" up
-    #$PPPD call "$Peer" updetach child-timeout "$PPPTimeout" linkname "$Peer"
-    $PPPD file "${cfg}"
-
-    if [[ $? -ne 0 ]]; then
-        rmdir "$STATE_DIR/mobile.${Interface}.${Profile}/"
-        report_error "Couldn't make pppd connection."
-        return 1
-    fi
-}
-
-mobile_down() {
-    local cfg
-    local chat
-    cfg="$STATE_DIR/mobile.${Interface}.${Profile}/options"
-    chat="$STATE_DIR/mobile.${Interface}.${Profile}/modem.chat"
-    PIDFILE="/var/run/mobile-${Profile}.pid"
-
-    if [[ -e $PIDFILE ]]; then
-        read PID < "$PIDFILE"
-        [[ "$PID" ]] && kill "$PID"
-    fi
-
-    rm "${cfg}"
-    rm "${chat}"
-    rmdir "$STATE_DIR/mobile.${Interface}.${Profile}/"
-}
-
-
-# vim: ft=sh ts=4 et sw=4: