4 files changed, 0 insertions, 169 deletions
diff --git a/doc/ethernet b/doc/ethernet
deleted file mode 100644
index 9ede84b..0000000
--- a/doc/ethernet
+++ /dev/null
@@ -1,46 +0,0 @@
-% ETHERNET netcfg manuals 
-% Arch Linux
-%
-
-# ethernet Manual
-## Description
-This connection method uses the unmaintained net-tools (ifconfig) and dhcpcd to gain an IP address.
-
-## Options
-INTERFACE (required)
-:    The wireless interface to configure
-IP (required)
-:   Can be either 'static' or 'dhcp'.  Static requires IFOPTS at least.
-IFOPTS
-:   Arguments to pass to 'ifconfig'. 
-GATEWAY (requires IP of 'static')
-:   Set specified gateway
-### DNS
-DNS
-:   Array of DNS nameservers. Simply specify the IP's of each of the DNS nameservers. 
-DNS1, DNS2 (deprecated)
-:   Specify first and second nameservers.
-SEARCH
-:   "search" line for /etc/resolv.conf
-DOMAIN
-:   "domain" line for /etc/resolv.conf
-HOSTNAME
-:   Set the system hostname. Ensure any hostname is correctly referenced in /etc/hosts.
-### DHCP
-DHCLIENT
-:   yes/no. Use dhclient instead of dhcpcd. Defaults to no.
-DHCP_OPTIONS
-:   String. Any extra arguments to pass to the dhcp client, presently dhcpcd.
-DHCP_TIMEOUT
-:   Integer. Maximum time to try for a DHCP IP. Default is 10 seconds.
-
-### 802.11x Authentication
-AUTH8021X 
-:   Use 802.11x authentication. Enable with 'yes'. 
-WPA_CONF (required for an AUTH8021X of 'yes' only)
-:   Path to wpa_supplicant configuration. Defaults to '/etc/wpa_supplicant.conf'
-WPA_OPTS (optional for an AUTH8021X of 'yes')
-:   Extra arguments for wpa_supplicant not specified otherwise. Any option here must specify wpa_supplicant driver. Defaults to '-Dwired'. 
-
-## Examples
-See /etc/network.d/examples
diff --git a/doc/ethernet-subr b/doc/ethernet-subr
deleted file mode 100644
index 761505a..0000000
--- a/doc/ethernet-subr
+++ /dev/null
@@ -1,54 +0,0 @@
-% ETHERNET-IPROUTE netcfg manuals 
-% Arch Linux
-%
-
-# ethernet-iproute Connection manual
-## Description
-This connection method uses the iproute suite of tools and dhcpcd to gain an IP address.
-
-## Options
-INTERFACE (required)
-:    The wireless interface to configure
-IP (required)
-:   Can be either 'static' or 'dhcp'.  Static requires at least one of ADDR or IPCFG. 
-ADDR (requires IP of 'static')
-:   A single IP address to configure a static IP. For example:
-GATEWAY (requires IP of 'static')
-:   Set specified gateway
-IPCFG 
-:   Array of arguments to pass to 'ip'. The power of this options is that it allows both simple and complicated routing configurations, within the framework of netcfg.
-### DNS
-DNS
-:   Array of DNS nameservers. Simply specify the IP's of each of the DNS nameservers. 
-SEARCH
-:   "search" line for /etc/resolv.conf
-DOMAIN
-:   "domain" line for /etc/resolv.conf
-HOSTNAME
-:   Set the system hostname. Ensure any hostname is correctly referenced in /etc/hosts.
-### DHCP
-DHCP_OPTIONS
-:   String. Any extra arguments to pass to the dhcp client, presently dhcpcd.
-DHCP_TIMEOUT
-:   Integer. Maximum time to try for a DHCP IP. Default is 10 seconds.
-
-### 802.11x Authentication
-AUTH8021X 
-:   Use 802.11x authentication. Enable with 'yes'. 
-WPA_CONF (required for an AUTH8021X of 'yes' only)
-:   Path to wpa_supplicant configuration. Defaults to '/etc/wpa_supplicant.conf'
-WPA_OPTS (optional for an AUTH8021X of 'yes')
-:   Extra arguments for wpa_supplicant not specified otherwise. Any option here must specify wpa_supplicant driver. Defaults to '-Dwired'. 
-
-## Examples
-### Using ADDR and GATEWAY to set static IP and gateway
-
-    IP="static"
-    ADDR="192.168.1.23"
-    GATEWAY="192.168.1.1"
- 
-### Using IPCFG to set a static IP and gateway with custom DNS
-
-    IP="static"
-    IPCFG=("addr add dev eth0 192.168.1.23/24 brd +" "route add default via 192.168.1.1")
-    DNS=("208.67.222.222" "208.67.220.220")
diff --git a/doc/wireless b/doc/wireless
deleted file mode 100644
index e1f649e..0000000
--- a/doc/wireless
+++ /dev/null
@@ -1,38 +0,0 @@
-% WIRELESS netcfg manuals 
-% Arch Linux
-%
-
-# 'wireless' Connection manual
-## Description
-This connection method uses wireless_tools and wpa_supplicant to configure a wireless network connection. 
-
-The new 'wireless-dbus' connection method is preferred over this 
-
-This connection uses the 'ethernet' connection after successful association and thus supports all of it's options. 
-
-## Options
-INTERFACE (required)
-:   The wireless interface to configure
-SECURITY (required for security of 'wep', 'wpa' or 'wpa-config')
-:   One of 'wpa', 'wep', 'none' or 'wpa-config'. Defaults to 'none'
-KEY (required for SECURITY of 'wpa' or 'wep' only)
-:   Wireless encryption key. 
-ESSID (this or AP is required)
-:   Name of network to connect to.
-AP (this or ESSID is required)
-:   AP of the network to connect to.
-TIMEOUT (optional)
-:   Time to wait for association. Defaults to 15 seconds. 
-SCAN (optional)
-:   Scan for a wireless network rather than blindly attempting to connect. Hidden SSID networks do not appear in a scan. Enable with 'yes'. Defaults to 'no'.
-IWCONFIG (optional)
-:   Arguments to pass to iwconfig before attempting to configure the connection. For example, BSSID.
-
-### WPA options  
-WPA_CONF (for SECURITY of 'wpa-config' only)
-:   Path to wpa_supplicant configuration. Defaults to '/etc/wpa_supplicant.conf'
-WPA_OPTS 
-:   Extra arguments for wpa_supplicant not specified otherwise. Any option here must specify wpa_supplicant driver. Defaults to '-Dwext'. 
-WPA_GROUP
-:   Group that has authority for on-the-fly config files created when SECURITY="wpa"
-
diff --git a/doc/wireless-dbus b/doc/wireless-dbus
deleted file mode 100644
index 886ea16..0000000
--- a/doc/wireless-dbus
+++ /dev/null
@@ -1,31 +0,0 @@
-% WIRELESS-DBUS netcfg manuals 
-% Arch Linux
-%
-
-# 'wireless-dbus' Connection manual 
-## Description
-This connection method uses wpa_supplicant's dbus interface to configure a wireless network connection.
-
-This connection uses the 'ethernet-iproute' connection after successful association and thus supports all of it's options. 
-
-## Options
-INTERFACE (required)
-:   The wireless interface to configure
-SECURITY (required)
-:   One of 'wpa', 'wep', 'none' or 'wpa-config'
-KEY (required for SECURITY of 'wpa' or 'wep' only)
-:   Wireless encryption key. 
-ESSID (this or AP is required)
-:   Name of network to connect to.
-AP (this or ESSID is required)
-:   AP of the network to connect to.
-TIMEOUT 
-:   Time to wait for association. Defaults to 15 seconds. 
-
-### WPA options
-WPA_CONF (for SECURITY of 'wpa-config' only)
-:   Path to wpa_supplicant configuration. Defaults to '/etc/wpa_supplicant.conf'
-WPA_DRIVER 
-:   wpa_supplicant driver to be used. Defaults to 'wext' 
-WPA_OPTS 
-:   Extra arguments for wpa_supplicant not specified otherwise.