From e3cc2987544e3f75a793eb3d5cc95d2c40309bda Mon Sep 17 00:00:00 2001
From: Robbie Smith <zoqaeski@gmail.com>
Date: Tue, 16 Apr 2013 11:03:52 +0200
Subject: Updated man page to include pppoe and mobile_ppp

Removed unnecessary options from example connection.
---
 docs/examples/mobile_ppp  |  7 ----
 docs/netctl.profile.5.txt | 85 +++++++++++++++++++++++++++++++++++++++++++++--
 2 files changed, 83 insertions(+), 9 deletions(-)

diff --git a/docs/examples/mobile_ppp b/docs/examples/mobile_ppp
index 4e5079f..f3b0b8a 100644
--- a/docs/examples/mobile_ppp
+++ b/docs/examples/mobile_ppp
@@ -1,7 +1,6 @@
 Description='Example PPP mobile connection'
 Interface=ttyUSB0
 Connection=mobile_ppp
-IdleTimeout=30
 
 # Debug pppd / chat output (separately from netctl)
 #PPPDebug=true
@@ -11,12 +10,6 @@ IdleTimeout=30
 # Use DNS provided by the peer (default: true)
 #UsePeerDNS=true
 
-# Always keep a connection established
-ConnectionMode='persist'
-# Establish connection on demand
-#ConnectionMode='demand'
-#IdleTimeout=300
-
 # The user and password are not always required
 #User='example@yourprovider.com'
 #Password='very secret'
diff --git a/docs/netctl.profile.5.txt b/docs/netctl.profile.5.txt
index e79c831..711c0db 100644
--- a/docs/netctl.profile.5.txt
+++ b/docs/netctl.profile.5.txt
@@ -42,6 +42,8 @@ AVAILABLE CONNECTION TYPES
     available.
 +pppoe+::
     For PPPoE connections.
++mobile_ppp+::
+    For mobile broadband PPP connections that use a USB modem.
 +tunnel+::
     For tunnel interfaces.
 +tuntap+::
@@ -281,8 +283,87 @@ connections of the `bridge' type:
     Maximum age parameter. See *brctl*(8) for details.
 
 
+OPTIONS FOR `pppoe' CONNECTIONS
+-------------------------------
+The interface to dial peer-to-peer over ethernet is specified in
+'Interface'. The following options are understood for connections of
+the `pppoe' type:
+
+'User=' and 'Password='::
+    The username and password to connect with.
+
+'ConnectionMode='::
+    This option specifies how a connection should be established, and
+    may take either `persist' or `demand' as its argument.
+
+'IdleTimeout='::
+    This option specifies the idle time (in seconds) after which `pppd'
+    should disconnect. This option is only valid if 'ConnectionMode' is
+    set to `demand'.
+
+'DefaultRoute='::
+    Use the default route provided by the peer (defaults to
+    `true')
+
+'UsePeerDNS='::
+    Use the DNS provided by the peer (defaults to `true')
+
+'LCPEchoInterval=' and 'LCPEchoFailure='::
+    These options override default LCP parameters from
+    `/etc/ppp/options'.
+
+The following advanced options are also understood:
+
+'PPPoEService='::
+    This option specifies the PPPoE service name.
+
+'PPPoEAC='::
+    This option specifies the PPPoE access concentrator name.
+
+'PPPoESession='::
+    This option specifies an existing session to attach to, and is of
+    the form `sessid:macaddr'.
+
+'PPPoEMAC='::
+    Only connect to specified MAC address
+
+'PPPoEIP6='::
+    Enable IPv6 support
+
+
+OPTIONS FOR `mobile_ppp' CONNECTIONS
+------------------------------------
+The name of the USB serial device is specified in 'Interface'. The
+following options are understood for connections of the `mobile_ppp'
+type:
+
+'DefaultRoute='::
+    Use the default route provided by the peer (defaults to
+    `true')
+
+'UsePeerDNS='::
+    Use the DNS provided by the peer (defaults to `true')
+
+'User=' and 'Password='::
+    The username and password to connect with. These are unset by
+    default, as they are often not required.
+
+'AccessPointName='::
+    The access point (apn) to connect on. This is specific to your
+    ISP.
+
+'Pin='::
+    If your modem requires a PIN to unlock, use this option.
+
+'Mode='::
+    This option is used to specify the connection mode. Can be one of
+    `3Gpref', `3Gonly', `GPRSpref', `GPRSonly', `None'. This generates
+    AT commands specific to certain Huawei modems; all other devices
+    should use `None'.
+
+
 OPTIONS FOR `tunnel' CONNECTIONS
-----------------------------------
+--------------------------------
 The name of the tunnel interface is specified in 'Interface'. Next to
 the *ip options*, the following are understood for connections of the
 `tunnel' type:
@@ -298,7 +379,7 @@ the *ip options*, the following are understood for connections of the
 
 
 OPTIONS FOR `tuntap' CONNECTIONS
-----------------------------------
+--------------------------------
 The name of the tuntap interface is specified in 'Interface'. Next to
 the *ip options*, the following are understood for connections of the
 `tuntap' type:
-- 
cgit v1.2.3-24-g4f1b