% NETCFG-PROFILES(5) netcfg 2.6.5 | Arch Linux % Rémy Oudompheng James Rayner % 17 July 2011 NAME ==== netcfg-profiles -- netcfg profiles documentation and syntax DESCRIPTION =========== The **netcfg**(8) profiles are plain text files that defines variables for netcfg behaviour. They must be compliant with **bash**(1) shell syntax and usually do not execute any code. They are named */etc/network.d/${profile_name}*. OVERVIEW ======== Profiles must define mandatory variables: INTERFACE : The name of the associated network interface. DESCRIPTION : A description of the profile. CONNECTION : The connection type used by the profile. Connections define how the network is set up for the profile and also determine additional configuration variable that control their behaviour. The available connection types are determined by files in */usr/lib/network/connections/*. Available connections ===================== ethernet : Standard network configuration, suitable for wired connections. wireless : Wireless connection, with **wpa_supplicant**(1) as configuration back-end. bridge : Network bridge setup using **brctl**(8). tuntap : TUN/TAP interfaces. vlan : VLAN setup. openvpn : OpenVPN setup. ppp : PPP connections setup. The configuration variable for these connection types is described in the following sections. Ethernet options reference ========================== ## Description This connection method uses the iproute suite of tools and dhcpcd to gain an IP address. IP (required for IPv4) : Can be either 'static' or 'dhcp'. Static requires at least one of ADDR or IPCFG. ## IPv4 options ADDR (requires IP of 'static') : A single IP address to configure a static IP. For example: GATEWAY (requires IP of 'static') : Set specified gateway NETMASK (requires IP of 'static') : Set specified netmask. Defaults to 24 ROUTES : An array of custom routes (of the form *address range* via *gateway*) IPCFG : Array of arguments to pass to 'ip'. The power of this options is that it allows both simple and complicated routing configurations, within the framework of netcfg. IFOPTS (deprecated, requires IP of 'static') : Arguments to pass to 'ifconfig'. This allows you to use the syntax for the older 'ifconfig' tool. Retained for compatability. ## IPv6 options IP6 (required for IPv6) : Either 'dhcp', 'dhcp-noaddr', 'stateless', 'static'. Leave unset to disable IPv6. ADDR6 (required for IP6=static) : An array of IPv6 addresses: prefix length may be specified via '1234:bcd::11/64' syntax. GATEWAY6 (for IP6=static) : The gateway address for IPv6 routing. ROUTES6 : An array of custom routes (of the form *address range* via *gateway*) ### DNS configuration DNS : Array of DNS nameservers. Simply specify the IP's of each of the DNS nameservers. SEARCH : "search" line for /etc/resolv.conf DOMAIN : "domain" line for /etc/resolv.conf HOSTNAME : Set the system hostname. Ensure any hostname is correctly referenced in /etc/hosts. DNS1, DNS2 (deprecated) : First and second DNS servers for /etc/resolv.conf ### DHCP configuration DHCP_OPTIONS (ipv4) : String. Any extra arguments to pass to the dhcp client, presently dhcpcd. DHCP_TIMEOUT : Integer. Maximum time to try for a DHCP IP. Default is 10 seconds. DHCLIENT : yes/no. Use dhclient instead of dhcpcd. Defaults to no DHCLIENT_OPTIONS (ipv4) : String. Extra options to pass to dhclient for IPv4. DHCLIENT6_OPTIONS (ipv6) : String. Extra options to pass to dhclient for IPv6. ### 802.11x Authentication AUTH8021X : Use 802.11x authentication. Enable with 'yes'. WPA_CONF (required for an AUTH8021X of 'yes' only) : Path to wpa_supplicant configuration. Defaults to '/etc/wpa_supplicant.conf' WPA_OPTS (optional for an AUTH8021X of 'yes') : Extra arguments for wpa_supplicant not specified otherwise. Any option here must specify wpa_supplicant driver. Defaults to '-Dwired'. ## Examples ### Using ADDR and GATEWAY to set static IP and gateway IP="static" ADDR="192.168.1.23" GATEWAY="192.168.1.1" ### Using IPCFG to set a static IP and gateway with custom DNS IP="static" IPCFG=("addr add dev eth0 192.168.1.23/24 brd +" "route add default via 192.168.1.1") DNS=("208.67.222.222" "208.67.220.220") Wireless options reference ========================== ## Description This connection method uses wpa_supplicant to configure a wireless network connection. This connection uses the 'ethernet' connection after successful association and thus supports all of its options. ## Options SECURITY (required for security of 'wep', 'wpa', 'wpa-configsection' or 'wpa-config') : One of 'wpa', 'wep', 'none', 'wpa-configsection' or 'wpa-config'. Defaults to 'none'. KEY (required for SECURITY of 'wpa' or 'wep' only) : Wireless encryption key. ESSID (this or AP is required) : Name of network to connect to. AP (this or ESSID is required) : AP (BSSID) of the network to connect to. HIDDEN (optional) : Define this to connect to hidden ESSIDs. ADHOC (optional) : Define this to use ad-hoc mode for wireless. TIMEOUT (optional) : Time to wait for association. Defaults to 15 seconds. SCAN (optional) : yes/no Scan for a wireless network rather than blindly attempting to connect. Hidden SSID networks do not appear in a scan. IWCONFIG (optional, deprecated) : Run iwconfig with these options before attempting to configure the connection. ### WPA options WPA_CONF (for SECURITY of 'wpa-config' only) : Path to wpa_supplicant configuration. Defaults to '/etc/wpa_supplicant.conf' WPA_OPTS : Extra arguments for wpa_supplicant not specified otherwise. WPA_GROUP : Group that has authority to configure wpa_supplicant via it's control interface. Used in any configuration that is generated by netcfg. WPA_COUNTRY (optional, nl80211 based drivers) : The country where the device will be used. This allows wpa_supplicant to enforce any local regulatory limitations and will allow all appropriate channels/frequencies for your device. WPA_DRIVER (optional) : A comma-separated list of wpa_supplicant driver interfaces to try. Defaults to 'nl80211,wext'. ### rfkill (Radio Kill Switch) options RFKILL : hard/soft A switch with physical on/off state that cannot be controlled via software is considered a 'hard' switch. Any switch that can be controlled via software is considered 'soft'. RFKILL_NAME : Some switches sysfs entries are not linked with the interface. To match them up, configure the name from /sys/class/rfkill/rfkillX/name here so that netcfg can identify which to control. Options for 'bridge' connections ================================ The options of 'ethernet' connections apply to set up standard IP connectivity. BRIDGE_INTERFACES : List of network interfaces taking part in the bridge. FWD_DELAY : Forward delay of the bridge, see **brctl**(8) MAX_AGE : maxage parameter, see **brctl**(8) Options for 'tuntap' connections ================================ The options of 'ethernet' connections apply to set up standard IP connectivity. MODE : Set to 'tun' or 'tap'. USER : The owning user of the tun/tap interface. GROUP : The owning group of the tun/tap interface. Options for 'ppp' connections ================================ PEER : The **pppd**(8) peer to use. PPP_TIMEOUT : **pppd**(8) timeout. Options for 'vlan' connections ================================ INTERFACE : The name of the virtual interface. VLAN_PHYS_DEV : The name of the associated physical interface. VLAN_ID : See **ip**(8). Options for 'openvpn' connections ================================ OVPN_CONFIG : Path to the **openvpn**(8) config file. OVPN_PID_FILE : Path to the **openvpn**(8) PID file. OVPN_FLAGS : Options to pass to **openvpn**(8) invocation.