#! /bin/bash
. /usr/lib/network/network


rfkill_from_name() {
    local name=$1
    for rfkill in /sys/class/rfkill/*; do
        if [[ "$(cat $rfkill/name)" == $name ]]; then
            echo $rfkill
            return 0
        fi
    done
    echo "none"
    return 1
}

wireless_up() {

    load_profile $1
    . ${SUBR_DIR}/8021x
    . ${SUBR_DIR}/wireless

    # If rfkill is specified, enable device.
    if [[ -n "$RFKILL_NAME" ]]; then
        path=$(rfkill_from_name $RFKILL_NAME)
        if [[ $? -ne 0 ]]; then
            report_fail "no rfkill switch with the name $RFKILL_NAME";
        fi 
        echo 1 > ${path}/state
        sleep 1
    fi

    # Check if interface exists
    if [[ ! -e /sys/class/net/"$INTERFACE" ]]; then
        if ! echo "$INTERFACE"|grep -Fq ":"; then
            report_fail "interface $INTERFACE does not exist"
            return 1
        fi
    fi  

    # Kill any lingering wpa_supplicants.
    report_debug wireless_up stop_wpa "$INTERFACE"
    stop_wpa "$INTERFACE"
            
    # Most drivers (mac80211) need mode set before device is brought up
    # Drivers generally default to managed, but set this to be sure.
    if [[ $(iwgetid -sm $INTERFACE) -ne Managed ]]; then
        report_debug wireless_up iwconfig "$INTERFACE" mode managed
        iwconfig $INTERFACE mode managed
    fi

    report_debug wireless_up ifup
    set_interface up $INTERFACE || return 1

    quirk "prescan" && iwlist $INTERFACE scan &> /dev/null # bcm43xx
    quirk "preessid" && eval "iwconfig $INTERFACE mode managed essid \"$ESSID\"" # ipw3945
 
    if checkyesno ${SCAN:-no}; then
        report_debug wireless_up scanning
        if ! find_essid $INTERFACE "$ESSID"; then
            report_fail "Network not present."
            return 1
        fi 
    fi
  
    # Manually set iwconfig options
    if [[ "$IWCONFIG" ]]; then
        report_debug wireless_up iwconfig "$INTERFACE" $IWCONFIG        
        iwconfig $INTERFACE $IWCONFIG
    fi

    # Set to 'none' if not set
    [[ -z "$SECURITY" ]] && SECURITY="none"

    case $SECURITY in
    wep|none)
        # 'none' uses iwconfig like wep. Use sane default if WEP_OPTS=""
        if [[ -z "$WEP_OPTS" ]]; then
            if [[ "$SECURITY" = "wep" ]]; then
                WEP_OPTS="essid \"$ESSID\" key $KEY"
            elif [[ "$SECURITY" = "none" ]]; then
                WEP_OPTS="essid \"$ESSID\""
            fi
        fi
              
        quirk "predown" && ifconfig $INTERFACE down # madwifi FS#10585
        
        report_debug wireless_up iwconfig "$INTERFACE" $WEP_OPTS
        if ! eval iwconfig $INTERFACE $WEP_OPTS; then
            report_fail "Could not set wireless configuration."
            return 1
        fi

        quirk "predown" && ifconfig $INTERFACE up # madwifi FS#10585
       
        report_debug ethernet_up wep_check
        if ! wep_check $INTERFACE $TIMEOUT; then
            report_fail "WEP Association Failed"
            return 1
        fi
        ;;    
    wpa)

        # Quirk for broken drivers... http://bbs.archlinux.org/viewtopic.php?id=36384
        quirk "wpaessid" && eval iwconfig $INTERFACE essid "\"$ESSID\""
         
        local WPA_CONF="/tmp/wpa.${1// /}" # substitute spaces out 
        echo "ctrl_interface=/var/run/wpa_supplicant" >> $WPA_CONF
        echo "ctrl_interface_group=${WPA_GROUP:-wheel}" >> $WPA_CONF        
        chmod 600 $WPA_CONF
        
        # Generate configuration
        if [[ "${#KEY}" == "64" ]]; then
            echo -e "network={ \nssid=\"$ESSID\" \npsk=$KEY \n}">> $WPA_CONF
        elif ! echo "$KEY" | wpa_passphrase "$ESSID" >> $WPA_CONF; then
            report_fail "Configuration generation failed. $(cat $WPA_CONF)"
            return 1
        fi

        # Connect!
        [[ -z "$WPA_OPTS" ]] && WPA_OPTS="-Dwext"
<<<<<<< Updated upstream
        report_debug wireless_up start_wpa "$INTERFACE" "$WPA_CONF" "$WPA_OPTS"
        if ! start_wpa $INTERFACE $WPA_CONF $WPA_OPTS; then
=======
        report_debug wireless_up start_wpa "$INTERFACE" "$WPA_CONF/wpa.conf" "$WPA_OPTS"
        if ! start_wpa "$INTERFACE" "$WPA_CONF" "$WPA_OPTS"; then
>>>>>>> Stashed changes
            report_fail "wpa_supplicant did not start, possible configuration error"
            return 1
        fi
        report_debug wireless_up wpa_check
        if ! wpa_check "$INTERFACE" "$TIMEOUT"; then
            report_fail "WPA Authentication/Association Failed"
            return 1
        fi
        ;;
    wpa-config)
        . ${SUBR_DIR}/8021x 
        [[ -z "$WPA_CONF" ]] && WPA_CONF="/etc/wpa_supplicant.conf" # defaults
        [[ -z "$WPA_OPTS" ]] && WPA_OPTS="-Dwext"
        report_debug wireless_up start_wpa "$INTERFACE" "$WPA_CONF" "$WPA_OPTS"
        if ! start_wpa "$INTERFACE" "$WPA_CONF" "$WPA_OPTS"; then
            report_fail "wpa_supplicant did not start, possible configuration error"
            return 1
        fi
        report_debug wireless_up wpa_check
        if ! wpa_check "$INTERFACE" "$TIMEOUT"; then
            report_fail "WPA Authentication/Association Failed"
            return 1
        fi
        ;;        
    esac
    
    conn=ethernet
    checkyesno ${IPROUTE:-no} && conn=ethernet-iproute
    if ! ${CONN_DIR}/$conn up $1; then
        wireless_down $1 YES
        return 1
    fi
}
 
wireless_down() {
    PROFILE=$1 NOETHERNETDOWN=$2
    load_profile $PROFILE
    . ${SUBR_DIR}/8021x 
    if ! checkyesno $NOETHERNETDOWN; then
        conn=ethernet
        checkyesno ${IPROUTE:-no} && conn=ethernet-iproute
        $CONN_DIR/$conn down $PROFILE  
    fi
    report_debug wireless_down stop_wpa "$INTERFACE"
    stop_wpa $INTERFACE 
	[[ "$SECURITY" == "wpa" ]] && rm -f "/tmp/wpa.${PROFILE// /}" # remove wpa config
    report_debug wireless_down iwconfig "$INTERFACE" essid off key off
    iwconfig $INTERFACE essid off key off &> /dev/null 
    set_interface down $INTERFACE
    
    # If rfkill is specified, disable device.
    if [[ -n "$RFKILL_NAME" ]]; then
        path=$(rfkill_from_name $RFKILL_NAME)
        if [[ $? -ne 0 ]]; then
            report_fail "no rfkill switch with the name $RFKILL_NAME";
        fi 
        echo 0 > ${path}/state
    fi
    
}

# Returns status of profile - is it still functional?
wireless_status() {
    load_profile $1
    if [[ "$(iwgetid -r)" -ne $ESSID ]]; then
        return 1
    elif ! ip link show dev ra0|grep -q "state UP"; then
        return 1
    fi

}

wireless_$1 $2
exit $?
# vim: set ts=4 et sw=4: