## /usr/lib/network/globals needs to be sourced before this file


## Add resolv.conf entries for an interface
# $1: interface name
# $2...: entries, one line per variable
resolvconf_add() {
    local interface="$1"
    shift
    printf "%s\n" "$@" | resolvconf -a "$interface"
}


## Set up an IP configuration
# $Interface: interface name
# $IP: type of IPv4 configuration
# $IP6: type of IPv6 configuration
ip_set() {
    local addr line route interface_sysctl=${Interface/.//}

    if [[ -z $IP && -z $IP6 ]]; then
        report_error "Neither IP, nor IP6 was specified"
        return 1
    fi

    case $IP in
      dhcp)
        case ${DHCPClient:-dhcpcd} in
          dhcpcd)
            rm -f "/run/dhcpcd-$Interface".{pid,cache}
            # If using own dns, tell dhcpcd to NOT replace resolv.conf
            [[ $DNS ]] && DhcpcdOptions+=" -C resolv.conf"
            do_debug dhcpcd -qL -t "${TimeoutDHCP:-10}" $DhcpcdOptions "$Interface" 2>&1 | report_debug "$(cat)"
            # The first array value of PIPESTATUS is the exit status of dhcpcd
            if (( PIPESTATUS != 0 )); then
                report_error "DHCP IP lease attempt failed on interface '$Interface'"
                return 1
            fi
          ;;
          dhclient)
            rm -f "/run/dhclient-${Interface}.pid"
            if ! do_debug dhclient -q -e "TIMEOUT=${TimeoutDHCP:-10}" -pf "/run/dhclient-$Interface.pid" $DhclientOptions "$Interface"; then
                report_error "DHCP IP lease attempt failed on interface '$Interface'"
                return 1
            fi
          ;;
          *)
            report_error "Unsupported DHCP client: '$DHCPClient'"
            return 1
          ;;
        esac
      ;;
      static)
        for addr in "${Address[@]}"; do
            if ! do_debug ip addr add "$addr" brd + dev "$Interface"; then
                report_error "Could not add address '$addr' to interface '$Interface'"
                return 1
            fi
        done
        if [[ $Gateway ]]; then
            if ! do_debug ip route add default via "$Gateway" dev "$Interface"; then
                report_error "Could not set gateway '$Gateway' on interface '$Interface'"
                return 1
            fi
        fi
      ;;
      ""|no)
      ;;
      *)
        report_error "IP must be either 'dhcp', 'static' or 'no'"
        return 1
      ;;
    esac

    if [[ $IP ]]; then
        # Add static IP routes
        for route in "${Routes[@]}"; do
            if ! do_debug ip route add $route dev "$Interface"; then
                report_error "Could not add route '$route' to interface '$Interface'"
                return 1
            fi
        done
    fi

    # Load ipv6 module if necessary
    case "$IP6" in
      dhcp*|stateless|static)
        [[ -d "/proc/sys/net/ipv6" ]] || modprobe ipv6
      ;;
      no)
        [[ -d "/proc/sys/net/ipv6" ]] && sysctl -q -w "net.ipv6.conf.$interface_sysctl.accept_ra=0"
      ;;
      "")  # undefined IP6 does not prevent RA's from being received -> nop
      ;;
      *)
        report_error "IP6 must be 'dhcp', 'dhcp-noaddr', 'stateless', 'static' or 'no'"
        return 1
      ;;
    esac

    case "$IP6" in
      dhcp*)
        if ! type dhclient &>/dev/null; then
            report_error "You need to install dhclient to use DHCPv6"
            return 1
        fi
        sysctl -q -w "net.ipv6.conf.$interface_sysctl.accept_ra=1"
        [[ $IP6 == "dhcp-noaddr" ]] && DhclientOptions6+=" -S"
        rm -f "/run/dhclient6-${Interface}.pid"
        if ! do_debug dhclient -6 -q -e "TIMEOUT=${TimeoutDHCP:-10}" -pf "/run/dhclient6-${Interface}.pid" $DhclientOptions6 "$Interface"; then
            report_error "DHCPv6 IP lease attempt failed on interface '$Interface'"
            return 1
        fi
      ;;
      stateless)
        sysctl -q -w "net.ipv6.conf.$interface_sysctl.accept_ra=1"
      ;;&
      static)
        sysctl -q -w "net.ipv6.conf.$interface_sysctl.accept_ra=0"
      ;;&
      stateless|static)
        for addr in "${Address6[@]}"; do
            if ! do_debug ip -6 addr add $addr dev "$Interface"; then
                report_error "Could not add address '$addr' to interface '$Interface'"
            fi
        done
      ;;
    esac

    if [[ $IP6 ]]; then
        # Wait for Duplicate Address Detection to finish
        if ! timeout_wait "${TimeoutDAD:-3}" '[[ -z "$(ip -6 addr show dev "$Interface" tentative)" ]]'; then
            report_error "Duplicate Address Detection is taking too long on interface '$Interface'"
            return 1
        fi

        # Add static IPv6 routes
        for route in "${Routes6[@]}"; do
            if ! do_debug ip -6 route add $route dev "$Interface"; then
                report_error "Could not add route '$route' to interface '$Interface'"
                return 1
            fi
        done

        # Set a custom gateway after DAD has finished
        if [[ $IP6 == @(stateless|static) && $Gateway6 ]]; then
            if ! do_debug ip -6 route replace default via "$Gateway6" dev "$Interface"; then
                report_error "Could not set gateway '$Gateway6' on interface '$Interface'"
                return 1
            fi
        fi
    fi

    for line in "${IPCustom[@]}"; do
        if ! do_debug ip $line; then
            report_error "Could not configure interface ($line)"
            return 1
        fi
    done

    if [[ $Hostname ]]; then
        if ! do_debug hostnamectl set-hostname "$Hostname"; then
            report_error "Cannot set the hostname to '$Hostname'"
            return 1
        fi
    fi

    if [[ $DNS ]]; then
        resolvconf_add "$Interface" \
                       "${DNSDomain/#/domain }" \
                       "${DNSSearch/#/search }" \
                       "${DNS[@]/#/nameserver }" \
                       "${DNSOptions[@]/#/options }"
    fi
}


## Clean up the dynamic part of an IP configuration
# $Interface: interface name
# $IP: type of IPv4 configuration
# $IP6: type of IPv6 configuration
ip_unset() {
    if [[ "$IP" == "dhcp" ]]; then
        case ${DHCPClient:-dhcpcd} in
          dhcpcd)
            if [[ -f "/run/dhcpcd-$Interface.pid" ]]; then
                do_debug dhcpcd -qk "$Interface" >/dev/null
            fi
          ;;
          dhclient)
            if [[ -f "/run/dhclient-$Interface.pid" ]]; then
                # Alternatively, use -r instead of -x to also release the lease
                do_debug dhclient -q -x "$Interface" -pf "/run/dhclient-$Interface.pid" >/dev/null
            fi
          ;;
        esac
    fi
    if [[ "$IP6" == dhcp* ]]; then
        if [[ -f "/run/dhclient6-$Interface.pid" ]]; then
            do_debug dhclient -6 -q -x "$Interface" -pf "/run/dhclient6-$Interface.pid" >/dev/null
        fi
    fi

    [[ $DNS ]] && resolvconf -d "$Interface"
}


# vim: ft=sh ts=4 et sw=4: