diff options
Diffstat (limited to 'scripts/makepkg.sh.in')
| -rw-r--r-- | scripts/makepkg.sh.in | 194 |
1 files changed, 115 insertions, 79 deletions
diff --git a/scripts/makepkg.sh.in b/scripts/makepkg.sh.in index 125f68c7..d1251b84 100644 --- a/scripts/makepkg.sh.in +++ b/scripts/makepkg.sh.in @@ -168,7 +168,7 @@ clean_up() { # clean up dangling symlinks to packages for pkg in ${pkgname[@]}; do - for file in ${pkg}-*-*-${CARCH}{${PKGEXT},${SRCEXT}}; do + for file in ${pkg}-*-*-*{${PKGEXT},${SRCEXT}}; do if [[ -h $file && ! -e $file ]]; then rm -f "$file" fi @@ -261,50 +261,92 @@ get_full_version() { } ## +# usage : get_pkg_arch( [$pkgname] ) +# return : architecture of the package +## +get_pkg_arch() { + if [[ -z $1 ]]; then + if [[ $arch = "any" ]]; then + printf "%s\n" "any" + else + printf "%s\n" "$CARCH" + fi + else + local arch_override + eval $(declare -f package_$1 | sed -n 's/\(^[[:space:]]*arch=\)/arch_override=/p') + if [[ $arch_override = "any" ]]; then + printf "%s\n" "any" + else + printf "%s\n" "$CARCH" + fi + fi +} + +## # Checks to see if options are present in makepkg.conf or PKGBUILD; # PKGBUILD options always take precedence. # -# usage : check_option( $option ) -# return : y - enabled -# n - disabled -# ? - not found +# usage : check_option( $option, $expected_val ) +# return : 0 - matches expected +# 1 - does not match expected +# 127 - not found ## check_option() { - local ret=$(in_opt_array "$1" ${options[@]}) - if [[ $ret != '?' ]]; then - printf "%s\n" "$ret" - return - fi + in_opt_array "$1" ${options[@]} + case $? in + 0) # assert enabled + [[ $2 = y ]] + return ;; + 1) # assert disabled + [[ $2 = n ]] + return + esac # fall back to makepkg.conf options - ret=$(in_opt_array "$1" ${OPTIONS[@]}) - if [[ $ret != '?' ]]; then - printf "%s\n" "$ret" - return - fi + in_opt_array "$1" ${OPTIONS[@]} + case $? in + 0) # assert enabled + [[ $2 = y ]] + return ;; + 1) # assert disabled + [[ $2 = n ]] + return + esac - echo '?' # Not Found + # not found + return 127 } ## # Check if option is present in BUILDENV # -# usage : check_buildenv( $option ) -# return : y - enabled -# n - disabled -# ? - not found +# usage : check_buildenv( $option, $expected_val ) +# return : 0 - matches expected +# 1 - does not match expected +# 127 - not found ## check_buildenv() { in_opt_array "$1" ${BUILDENV[@]} + case $? in + 0) # assert enabled + [[ $2 = "y" ]] + return ;; + 1) # assert disabled + [[ $2 = "n" ]] + return ;; + esac + + # not found + return 127 } ## # usage : in_opt_array( $needle, $haystack ) -# return : y - enabled -# n - disabled -# ? - not found +# return : 0 - enabled +# 1 - disabled +# 127 - not found ## in_opt_array() { local needle=$1; shift @@ -312,15 +354,16 @@ in_opt_array() { local opt for opt in "$@"; do if [[ $opt = "$needle" ]]; then - echo 'y' # Enabled - return + # enabled + return 0 elif [[ $opt = "!$needle" ]]; then - echo 'n' # Disabled - return + # disabled + return 1 fi done - echo '?' # Not Found + # not found + return 127 } @@ -910,12 +953,12 @@ run_function() { local pkgfunc="$1" # clear user-specified buildflags if requested - if [[ $(check_option buildflags) = "n" ]]; then + if check_option "buildflags" "n"; then unset CFLAGS CXXFLAGS LDFLAGS fi # clear user-specified makeflags if requested - if [[ $(check_option makeflags) = "n" ]]; then + if check_option "makeflags" "n"; then unset MAKEFLAGS fi @@ -962,13 +1005,13 @@ run_function() { run_build() { # use distcc if it is requested (check buildenv and PKGBUILD opts) - if [[ $(check_buildenv distcc) = "y" && $(check_option distcc) != "n" ]]; then + if check_buildenv "distcc" "y" && ! check_option "distc" "n"; then [[ -d /usr/lib/distcc/bin ]] && export PATH="/usr/lib/distcc/bin:$PATH" export DISTCC_HOSTS fi # use ccache if it is requested (check buildenv and PKGBUILD opts) - if [[ $(check_buildenv ccache) = "y" && $(check_option ccache) != "n" ]]; then + if check_buildenv "ccache" "y" && ! check_option "ccache" "n"; then [[ -d /usr/lib/ccache/bin ]] && export PATH="/usr/lib/ccache/bin:$PATH" fi @@ -994,12 +1037,12 @@ tidy_install() { cd_safe "$pkgdir" msg "$(gettext "Tidying install...")" - if [[ $(check_option docs) = "n" && -n ${DOC_DIRS[*]} ]]; then + if check_option "docs" "n" && [[ -n ${DOC_DIRS[*]} ]]; then msg2 "$(gettext "Removing doc files...")" rm -rf -- ${DOC_DIRS[@]} fi - if [[ $(check_option purge) = "y" && -n ${PURGE_TARGETS[*]} ]]; then + if check_option "purge" "y" && [[ -n ${PURGE_TARGETS[*]} ]]; then msg2 "$(gettext "Purging unwanted files...")" local pt for pt in "${PURGE_TARGETS[@]}"; do @@ -1011,7 +1054,7 @@ tidy_install() { done fi - if [[ $(check_option zipman) = "y" && -n ${MAN_DIRS[*]} ]]; then + if check_option "zipman" "y" && [[ -n ${MAN_DIRS[*]} ]]; then msg2 "$(gettext "Compressing man and info pages...")" local manpage ext file link hardlinks hl find ${MAN_DIRS[@]} -type f 2>/dev/null | @@ -1047,13 +1090,13 @@ tidy_install() { done fi - if [[ $(check_option strip) = "y" ]]; then + if check_option "strip" "y"; then msg2 "$(gettext "Stripping unneeded symbols from binaries and libraries...")" # make sure library stripping variables are defined to prevent excess stripping [[ -z ${STRIP_SHARED+x} ]] && STRIP_SHARED="-S" [[ -z ${STRIP_STATIC+x} ]] && STRIP_STATIC="-S" local binary - find . -type f -perm -u+w 2>/dev/null | while read binary ; do + find . -type f -perm -u+w -print0 2>/dev/null | while read -d '' binary ; do case "$(file -bi "$binary")" in *application/x-sharedlib*) # Libraries (.so) strip $STRIP_SHARED "$binary";; @@ -1065,17 +1108,17 @@ tidy_install() { done fi - if [[ $(check_option libtool) = "n" ]]; then + if check_option "libtool" "n"; then msg2 "$(gettext "Removing "%s" files...")" "libtool" find . ! -type d -name "*.la" -exec rm -f -- '{}' \; fi - if [[ $(check_option emptydirs) = "n" ]]; then + if check_option "emptydirs" "n"; then msg2 "$(gettext "Removing empty directories...")" find . -depth -type d -empty -delete fi - if [[ $(check_option upx) = "y" ]]; then + if check_option "upx" "y"; then msg2 "$(gettext "Compressing binaries with %s...")" "UPX" local binary find . -type f -perm -u+w 2>/dev/null | while read binary ; do @@ -1201,7 +1244,7 @@ write_pkginfo() { printf "builddate = %s\n" "$builddate" printf "packager = %s\n" "$packager" printf "size = %s\n" "$size" - printf "arch = %s\n" "$PKGARCH" + printf "arch = %s\n" "$pkgarch" [[ $license ]] && printf "license = %s\n" "${license[@]}" [[ $replaces ]] && printf "replaces = %s\n" "${replaces[@]}" @@ -1234,14 +1277,15 @@ write_pkginfo() { done for it in "${packaging_options[@]}"; do - local ret="$(check_option $it)" - if [[ $ret != "?" ]]; then - if [[ $ret = "y" ]]; then + check_option "$it" "y" + case $? in + 0) printf "makepkgopt = %s\n" "$it" - else + ;; + 1) printf "makepkgopt = %s\n" "!$it" - fi - fi + ;; + esac done check_license @@ -1287,11 +1331,7 @@ create_package() { nameofpkg="$1" fi - if [[ $arch = "any" ]]; then - PKGARCH="any" - else - PKGARCH=$CARCH - fi + pkgarch=$(get_pkg_arch) write_pkginfo $nameofpkg > .PKGINFO @@ -1313,7 +1353,7 @@ create_package() { msg2 "$(gettext "Compressing package...")" local fullver=$(get_full_version) - local pkg_file="$PKGDEST/${nameofpkg}-${fullver}-${PKGARCH}${PKGEXT}" + local pkg_file="$PKGDEST/${nameofpkg}-${fullver}-${pkgarch}${PKGEXT}" local ret=0 [[ -f $pkg_file ]] && rm -f "$pkg_file" @@ -1465,17 +1505,14 @@ install_package() { msg "$(gettext "Installing %s package group with %s...")" "$pkgbase" "$PACMAN -U" fi - local fullver pkg pkglist + local fullver pkgarch pkg pkglist for pkg in ${pkgname[@]}; do fullver=$(get_full_version $pkg) - if [[ -f $PKGDEST/${pkg}-${fullver}-${CARCH}${PKGEXT} ]]; then - pkglist+=" $PKGDEST/${pkg}-${fullver}-${CARCH}${PKGEXT}" - else - pkglist+=" $PKGDEST/${pkg}-${fullver}-any${PKGEXT}" - fi + pkgarch=$(get_pkg_arch $pkg) + pkglist+=("$PKGDEST/${pkg}-${fullver}-${pkgarch}${PKGEXT}") done - if ! run_pacman -U $pkglist; then + if ! run_pacman -U ${pkglist[@]}; then warning "$(gettext "Failed to install built package(s).")" return 0 fi @@ -1653,12 +1690,12 @@ check_software() { # check for sudo if we will need it during makepkg execution if (( ! ( ASROOT || INFAKEROOT ) && ( DEP_BIN || RMDEPS || INSTALL ) )); then if ! type -p sudo >/dev/null; then - warning "$(gettext "Sudo can not be found. Will use su to acquire root privileges.")" + warning "$(gettext "Cannot find the %s binary. Will use %s to acquire root privileges.")" "sudo" "su" fi fi # fakeroot - building as non-root user - if [[ $(check_buildenv fakeroot) = "y" ]] && (( EUID > 0 )); then + if check_buildenv "fakeroot" "y" && (( EUID > 0 )); then if ! type -p fakeroot >/dev/null; then error "$(gettext "Cannot find the %s binary required for building as non-root user.")" "fakeroot" ret=1 @@ -1666,7 +1703,7 @@ check_software() { fi # gpg - package signing - if [[ $SIGNPKG == 'y' || (-z "$SIGNPKG" && $(check_buildenv sign) == 'y') ]]; then + if [[ $SIGNPKG == 'y' ]] || { [[ -z $SIGNPKG ]] && check_buildenv "sign" "y"; }; then if ! type -p gpg >/dev/null; then error "$(gettext "Cannot find the %s binary required for signing packages.")" "gpg" ret=1 @@ -1690,7 +1727,7 @@ check_software() { fi # upx - binary compression - if [[ $(check_option upx) == 'y' ]]; then + if check_option "upx" "y"; then if ! type -p upx >/dev/null; then error "$(gettext "Cannot find the %s binary required for compressing binaries.")" "upx" ret=1 @@ -1698,7 +1735,7 @@ check_software() { fi # distcc - compilation with distcc - if [[ $(check_buildenv distcc) = "y" && $(check_option distcc) != "n" ]]; then + if check_buildenv "distcc" "y" && ! check_option "distcc" "n" ]]; then if ! type -p distcc >/dev/null; then error "$(gettext "Cannot find the %s binary required for distributed compilation.")" "distcc" ret=1 @@ -1706,7 +1743,7 @@ check_software() { fi # ccache - compilation with ccache - if [[ $(check_buildenv ccache) = "y" && $(check_option ccache) != "n" ]]; then + if check_buildenv "ccache" "y" && ! check_option "ccache" "n"; then if ! type -p ccache >/dev/null; then error "$(gettext "Cannot find the %s binary required for compiler cache usage.")" "ccache" ret=1 @@ -1714,7 +1751,7 @@ check_software() { fi # strip - strip symbols from binaries/libraries - if [[ $(check_option strip) = "y" ]]; then + if check_option "strip" "y"; then if ! type -p strip >/dev/null; then error "$(gettext "Cannot find the %s binary required for object file stripping.")" "strip" ret=1 @@ -1722,7 +1759,7 @@ check_software() { fi # gzip - compressig man and info pages - if [[ $(check_option zipman) = "y" ]]; then + if check_option "zipman" "y"; then if ! type -p gzip >/dev/null; then error "$(gettext "Cannot find the %s binary required for compressing man and info pages.")" "gzip" ret=1 @@ -2062,7 +2099,7 @@ PACMAN=${PACMAN:-pacman} # check if messages are to be printed using color unset ALL_OFF BOLD BLUE GREEN RED YELLOW -if [[ -t 2 && ! $USE_COLOR = "n" && $(check_buildenv color) = "y" ]]; then +if [[ -t 2 && ! $USE_COLOR = "n" ]] && check_buildenv "color" "y"; then # prefer terminal safe colored and bold text when tput is supported if tput setaf 0 &>/dev/null; then ALL_OFF="$(tput sgr0)" @@ -2146,7 +2183,7 @@ use the %s option.")" "makepkg" "--asroot" error "$(gettext "The %s option is meant for the root user only. Please\n\ rerun %s without the %s flag.")" "--asroot" "makepkg" "--asroot" exit 1 # $E_USER_ABORT - elif (( EUID > 0 )) && [[ $(check_buildenv fakeroot) != "y" ]]; then + elif (( EUID > 0 )) && ! check_buildenv "fakeroot" "y"; then warning "$(gettext "Running %s as an unprivileged user will result in non-root\n\ ownership of the packaged files. Try using the %s environment by\n\ placing %s in the %s array in %s.")" "makepkg" "fakeroot" "'fakeroot'" "BUILDENV" "$MAKEPKG_CONF" @@ -2230,7 +2267,7 @@ if declare -f build >/dev/null; then fi if declare -f check >/dev/null; then # "Hide" check() function if not going to be run - if [[ $RUN_CHECK = 'y' || (! $(check_buildenv check) = "n" && ! $RUN_CHECK = "n") ]]; then + if [[ $RUN_CHECK = 'y' ]] || { ! check_buildenv "check" "n" && [[ $RUN_CHECK != "n" ]]; }; then CHECKFUNC=1 fi fi @@ -2246,8 +2283,7 @@ if [[ -n "${PKGLIST[@]}" ]]; then fi # check if gpg signature is to be created and if signing key is valid -[[ -z $SIGNPKG ]] && SIGNPKG=$(check_buildenv sign) -if [[ $SIGNPKG == 'y' ]]; then +if { [[ -z $SIGNPKG ]] && check_buildenv "sign" "y"; } || [[ $SIGNPKG == 'y' ]]; then if ! gpg --list-key ${GPGKEY} &>/dev/null; then if [[ ! -z $GPGKEY ]]; then error "$(gettext "The key %s does not exist in your keyring.")" "${GPGKEY}" @@ -2261,8 +2297,8 @@ fi if (( ! SPLITPKG )); then fullver=$(get_full_version) - if [[ -f $PKGDEST/${pkgname}-${fullver}-${CARCH}${PKGEXT} \ - || -f $PKGDEST/${pkgname}-${fullver}-any${PKGEXT} ]] \ + pkgarch=$(get_pkg_arch) + if [[ -f $PKGDEST/${pkgname}-${fullver}-${pkgarch}${PKGEXT} ]] \ && ! (( FORCE || SOURCEONLY || NOBUILD )); then if (( INSTALL )); then warning "$(gettext "A package has already been built, installing existing package...")" @@ -2278,8 +2314,8 @@ else somepkgbuilt=0 for pkg in ${pkgname[@]}; do fullver=$(get_full_version $pkg) - if [[ -f $PKGDEST/${pkg}-${fullver}-${CARCH}${PKGEXT} \ - || -f $PKGDEST/${pkg}-${fullver}-any${PKGEXT} ]]; then + pkgarch=$(get_pkg_arch $pkg) + if [[ -f $PKGDEST/${pkg}-${fullver}-${pkgarch}${PKGEXT} ]]; then somepkgbuilt=1 else allpkgbuilt=0 @@ -2361,7 +2397,7 @@ if (( SOURCEONLY )); then cd_safe "$startdir" # if we are root or if fakeroot is not enabled, then we don't use it - if [[ $(check_buildenv fakeroot) != "y" ]] || (( EUID == 0 )); then + if ! check_buildenv "fakeroot" "y" || (( EUID == 0 )); then create_srcpackage else enter_fakeroot @@ -2453,7 +2489,7 @@ else cd_safe "$startdir" # if we are root or if fakeroot is not enabled, then we don't use it - if [[ $(check_buildenv fakeroot) != "y" ]] || (( EUID == 0 )); then + if ! check_buildenv "fakeroot" "y" || (( EUID == 0 )); then if (( ! REPKG )); then devel_update (( BUILDFUNC )) && run_build |