summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-12-12meson: remove useless mkdir -pEli Schwartz1-7/+0
directories are created by install_dir within the subdir custom_target installation targets. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-12-10Enable additional debug flags/logging with debugoptimized buildsDave Reisner1-1/+1
This lets developers run a local build with optimizations but also the added debug logging that comes with PACMAN_DEBUG being defined. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-12-10scripts/library: fix typo in READMEMichael Straube1-1/+1
Simply fix a typo: in written -> is written Signed-off-by: Michael Straube <michael.straube@posteo.de> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-12-10check localdb before upgrading packageAndrew Gregory4-1/+30
Commit 2ee7a8d89ad693617307260604e1d58757fd2978 replaced a manual check for a local package with a check for the "oldpkg" member, which gets set at the beginning of the transaction. If the package was also in the remove list, such as when a package gets replaced, it would no longer be in the local db and pacman would try to remove it twice, resulting in superfluous error messages. Fixes: FS#50875, FS#55534 Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-12-04libmakepkg/executable: don't rely on scoped value of $ret to flag outcomesEli Schwartz9-14/+12
Elsewhere, we return 1 if a library dropin fails, and when running functions in a loop, we use `|| ret=1` to preserve scope. This ensures the return value of the function remains useful in isolation. Do the same thing here as well. Drop trivial function which wraps a dropin that also uses $ret, since it's no longer needed. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-12-04Make `make distcheck` work when bash-completion is installed.Eli Schwartz1-1/+2
bash-completion uses pkg-config to determine the best installation directory, but this does not take --prefix into account (although it works fine with DESTDIR). The fallback value does attempt to set this based on --prefix. The distcheck uses --prefix, though, which means when attempting to install the results and bash-completion support for pkg-config was detected, it errors out on trying to write to, usually, /usr/share. Tell distcheck to use the prefix-based fallback location instead, as the PKG_CHECK_* override. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-12-03configure.ac: use $datarootdir instead of $prefix/shareAllan McRae1-2/+2
Even worse, makepkg-template ignored $prefix completely.
2018-11-28scripts: make repo-add utilize a wrapper as wellEli Schwartz1-5/+3
Now that repo-add uses libmakepkg, it needs to have $LIBRARY set before testing it in-tree. [Allan: fix "make distcheck"] Signed-off-by: Allan McRae <allan@archlinux.org>
2018-11-28autotools: be more accurate in comments when generating processed scriptsEli Schwartz1-1/+1
Instead of assuming all scripts are .sh.in and leaving a comment to that effect, just take the input file directly. This depends on the first dependency for the target being the source of the script. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-11-28scripts: fix some inaccurate Makefile targets, and be more templatedEli Schwartz1-14/+2
All of our scripts depend on the same pattern .sh.in, and since commit b5d62d2c91a2caf5c18945921cdf12af6f36b2d4, they also all (not just makepkg itself) depend on libmakepkg. There's no real reason to include separate targets for them just to establish dependency rules. While we are at it, fix a longstanding bug where generated wrapper scripts did not depend on wrapper.sh.in (which due to moving to .lib, requires we regenerate the script too), by making the shared target pattern depend on it. All our generated scripts now require the wrapper, even repo-add which now uses libmakepkg. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-11-28scripts: fix repo-remove/elephant Makefile targetsEli Schwartz1-7/+3
repo-remove and repo-elephant don't care whether repo-add.sh.in is updated... but they do require the repo-add target to be up to date, so use that instead. As a bonus, use the same rule for both of them.
2018-11-28meson: be more accurate in comments when generating processed scriptsEli Schwartz1-1/+1
Instead of assuming all scripts are .sh.in and leaving a comment to that effect, just take the input file directly. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-11-28build-aux: rm annoying and useless fileEli Schwartz1-652/+0
tap-driver.sh is added to the build tree by autoreconf, and contains upstream modifications as such. This results in dirty working trees. It was originally added in commit 403c175dbc84a8198b92bbe76f66eade613cff48 which made the testsuite use automake, but as far as I can tell, never served any purpose. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-11-28add missing tests to meson.buildAndrew Gregory1-0/+2
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-11-28common/ini: remove unnecessary alpm includeAndrew Gregory1-2/+1
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-11-27require actual siglevel for defaultAndrew Gregory1-1/+4
ALPM_SIG_USE_DEFAULT does not refer to an actual siglevel, rather it indicates that the global default should be used in place of the operation-specific one. Setting this value for the global default itself makes no sense. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-11-27always allow explicit empty siglevel for sync dbsAndrew Gregory1-1/+1
An empty siglevel does not do any signature verification which is exactly what we want when compiled without gpg support. This is already allowed in other parts of the codebase and required for the test suite to pass when compiled without gpg support. Fixes: FS#60880 Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-11-27add specific error for missing gpg supportAndrew Gregory4-5/+10
"wrong or NULL argument passed" is a useless error for end users. Fixes FS#60880. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-11-27Split prepare_buildenv() to libmakepkgQue Quotion9-43/+236
This opens the door for third parties to provide libmakepkg extentions for the purpose of altering the build environment. Signed-off-by: Que Quotion <quequotion@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-11-27Split check_software() to libmakepkgQue Quotion15-172/+537
This opens the door for third parties who provide extensions to libmakepkg to supply scripts that confirm the presence of their dependant executables. Signed-off-by: Que Quotion <quequotion@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-11-27scripts/meson: ensure wrapper scripts are executableDave Reisner1-12/+9
2018-11-27makepkg: if "!buildflags" and "debug" coincide, unset the debug buildflags tooEli Schwartz1-1/+1
If a user has a makepkg.conf policy to enable debug builds, but a PKGBUILD has disabled buildflags, we would unset the *FLAGS but then later append the debug *FLAGS anyway, which would result in some *FLAGS being used, against the wishes of the PKGBUILD author. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-11-27buildsys: remove size_to_humanDave Reisner5-30/+1
This was only ever used by paccache, and paccache has since been moved to pacman-contrib.
2018-11-27meson: separate out wrapped from non-wrapped scriptsDave Reisner1-2/+18
makepkg-template is a perl script and doesn't get wrapped by our shell wrapper. It (wrongly) reads from the host machine rather than the build root, but this is working as implemented.
2018-11-27Remove Doxyfile from EXTRA_DISTAllan McRae1-1/+0
We generate this now, so no need to distribute. Fixes "make dist". Signed-off-by: Allan McRae <allan@archlinux.org>
2018-11-03repo-add: print the name of the database when extractingEli Schwartz1-1/+1
Currently this prints the following message: ==> Extracting database to a temporary location... ==> Extracting database to a temporary location... This redundancy is potentially confusing and may cause people to think something is wrong. Historically, this message came from a time when we only extracted one database, but repo-add was changed to always create the files database in commit cb0f2bd0385f447e045e2b2aab9ffa55df3c2d8a and whole code block with message intact was moved into a for loop and run (and printed) twice. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-11-03makepkg: fix .PKGINFO/.BUILDINFO files swallowing status printingEli Schwartz1-3/+2
The respective write_* functions are low-level and shouldn't be outputting statuses; move these to the logic flow where they are used. This ensures the functions can be used in the future wherever, and also solves an issue where, as fallout from the message.sh retrofitting in commit 882e707e40bbade0111cf3bdedbdac4d4b70453b, the statuses got redirected to the actual files. The resulting package was technically correct, except that it contained useless lines which pacman ignored, and repo-add also ignored but at the same time generated an error message: /usr/bin/repo-add: line 335: declare: `=-> Generating .PKGINFO file...': not a valid identifier Thirdparty package tools with stricter parsers may abort with errors, and "repose" is known to do so. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-11-03pacman-key: just accept one file to verify, and enforce detached sigsEli Schwartz2-13/+26
Simply pass options on to gpg the same way gpg uses them -- no looping through and checking lots of signatures. This prevents a situation where the signature file to be verified is manipulated to contain an embedded signature which is valid, but not a detached signature for the file you are actually trying to verify. gpg does not offer an option to verify many files at once by naming each signature/file pair, and there's no reason for us to do so either, since it would be quite tiresome to do so. In the event that there is no signature/file pair specified to pacman-key itself, - preserve gpg's behavior, *if* the matching file does not exist, by - assuming the signature is an embedded signature - deviate from gpg's behavior, by - offering a security warning about which one is happening - when there is an embedded signature *and* a matching detached file, assume the latter is desired Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-11-02meson: add a wrapper to bootstrap scripts from within build dirDave Reisner4-4/+42
This doesn't do quite as good of a job of "hiding away" the real script as we did with autotools, but it satisfies the need for being able to run scripts which depend on libmakepkg with the local copy within the repo. We do, however, improve upon the autotools script by ensuring that the bash path used in configuring pacman is the interpreter used to run the underlying script.
2018-11-02Add meson.build files to build with mesonDave Reisner27-0/+2063
Provide both build systems in parallel for now, to ensure that we work out all the differences between the two. Some time from now, we'll give up on autotools. Meson tends to be faster and probably easier to read/maintain. On my machine, the full meson configure+build+install takes a little under half as long as a similar autotools-based invocation. Building with meson is a two step process. First, configure the build: meson build Then, compile the project: ninja -C build There's some mild differences in functionality between meson and autotools. specifically: 1) No singular update-po target. meson only generates individual update-po targets for each textdomain (of which we have 3). To make this easier, there's a build-aux/update-po script which finds all update-po targets and runs them. 2) No 'make dist' equivalent. Just run 'git archive' to generate a suitable tarball for distribution.
2018-10-23Dynamically generate Doxyfile from inputDave Reisner3-2/+6
This isn't super interesting for the autotools side, but it's necessary in order to make things sane for other build systems which we might introduce in the future.
2018-10-21Port scripts to use libmakepkg's messaging code.Eli Schwartz9-95/+40
Remove all remnants of library/{output_format,term_colors}.sh Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-10-21message.sh: add modifications from output_format.shEli Schwartz1-0/+8
In the spirit of making libmakepkg more useful as a library, and, critically, *using* that library for additional pacman scripts, we should include all of output_format.sh and term_colors.sh directly in libmakepkg and hopefully stop having to embed additional copies in e.g. repo-add via m4 macros. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-10-21makepkg: send messages to stdout rather than stderrEli Schwartz3-5/+5
This behavior is confusing, since it means absolutely everything goes to stderr and makepkg itself is a quiet program that produces no expected output??? The only situation where messages should go to stderr rather than stdout, is with --geninteg which is meant to return the checksums on stdout (but we don't want to totally get rid of status messages when redirecting the results elsewhere, or, worse, redirect status messages to a PKGBUILD). For this specific case, redirect message output to stderr in the --geninteg callers directly. Implements FS#17173 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-10-21makepkg: use builtin globbing to print files in packageEli Schwartz1-2/+5
- it comes with free collation when moving the LC_ALL declaration up a bit; this fixes a bug where the .FILES were not being properly sorted and their order depended on directory creation order, which broke reproducible builds in the wild. - it handles sorting null-delimited output everywhere, without sort -z; this lets us get rid of sed hacks - it is faster than invoking multiple find subprocesses - dotfiles can be automatically printed *and the C locale sorts them first* with a single ** glob Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-10-21makepkg: use bash 4.4 to localize `set` without explicitly saving/restoringEli Schwartz1-3/+3
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-10-21bash-completion: disable completions for pacman --search operationsEli Schwartz1-0/+2
We don't need exact package name completions for something that expects a regular expression *search*, which is what we currently do. If you want a package name completion for a search, you don't need the search. This change is consistent with the current state of zsh completions. Fixes FS#59965 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-10-21bash-completion: don't complete filenames when they're not wantedEli Schwartz1-6/+12
Filename completion should only be generated for makepkg, when using the options -p or --config... which means we should offer option completions by default. Filename completion for pacman, should not be generated when using -Qu, or -F without -o. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-10-21handle EINTR while polling scripts/hooksAndrew Gregory3-1/+25
If poll() is interrupted by a signal, alpm was closing the socket it uses for listening to script/hook output. This would drop script output at the least and kill the script at the worst. Fixes FS#60396 Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-10-21reset signal handlers before running scripts/hooksAndrew Gregory3-0/+32
Front-ends or libraries may set signals to be ignored, which gets inherited across fork and exec. This can cause scripts to malfunction if they expect the signal. To make matters worse, scripts written in bash can't reset signals that were ignored when bash was started. Fixes FS#56756 Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-10-21libmakepkg: fix linting arrays of empty stringsmorganamilo1-2/+2
[[ ${array[@]} ]] will resolve to false if array only contains empty strings. This means that values such as "depends=('')" can be inserted into a pkgbuild and bypass the linting. This causes makepkg to successfully build the package while pacman refuses to install it because of the unmet dependency on ''. Instead check the length of the array. Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-10-20Drop vestiges of SIZECMDDave Reisner1-1/+0
SIZECMD was replaced in 1af766987f with a POSIX solution, and this token is no longer used/needed.
2018-10-20libalpm: process needed before group selectionmorganamilo1-0/+11
When --needed is used, up to date packages are now filtered out before showing the group select. Fixes FS#22870. Signed-off-by: morganamilo <morganamilo@gmail.com>
2018-10-20pacman: don't error when a group exists but all packages are ignoredmorganamilo1-0/+18
Currently when attempting to sync a group where all packages are ignored, either by ignorepkg, ignoregroup or --needed, pacman will error with "target not found". Instead, if a group has no packages check if the group exists before throwing an error. Signed-off-by: morganamilo <morganamilo@gmail.com>
2018-10-19Port pactest to python3Dave Reisner5-9/+10
Use BytesIO instead of StringIO, and ensure that we unicode-encode data where needed.
2018-10-18alpm: Fix SIGINT handling re: aborting downloadOlivier Brunel1-0/+1
Upon receiving SIGINT a flag is set to abort the (curl) download. However, since it was never reset/initialized, if a front-end doesn't actually exit on SIGINT, and later tries any operation that needs to perform a new download, said download would always get aborted right away due to the flag not having been reset.
2018-10-18alpm: Do not raise SIGINT when filesize goes over limitOlivier Brunel1-1/+1
Variable dload_interrupted is used both to abort a download because SIGINT was caught, and when a file limit is reached. But raising SIGINT is only meant to happen in the first case. Signed-off-by: Olivier Brunel <jjk@jjacky.com>
2018-09-19repo-add: add support for the zst formatEli Schwartz1-0/+1
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-09-19makepkg: add support for the zst formatEli Schwartz3-1/+4
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-09-19makepkg: lint_pkgver: Run even if PKGVERFUNCLuke Shumaker1-5/+0
lint_pkgver returns 0 if PKGVERFUNC, since it's likely that update_pkgver() will change the value of pkgver anyway, and there's no point in linting the old value. update_pkgver() will call check_pkgver() itself to validate the new value. However, that "optimization" only holds if we're definitely going to call update_pkgver() later; and that's way more complicated than if (( PKGVERFUNC )); then it's more like: if (( !GENINTEG && !PACKAGELIST && !PRINTSRCINFO && !SOURCEONLY && !REPKG && PKGVERFUNC )); then Which is to say: If I have a PKGBUILD with pkgver(): * if I run `makepkg -g` I expect it to lint pkgver, but it won't * if I run `makepkg -R` I expect it to lint pkgver, but it won't * ... So let's fix that. Rather than try to keep a huge list of conditions in sync with the flow of makepkg.sh.in, let's just drop it. As far as I can tell, the only thing that skipping lint_pkgver() really enables is letting the PKGBUILD author write `pkgver=` in the initial version, and letting pkgver() fill it in. They can just start writing `pkgver=0` for that workflow. Signed-off-by: Allan McRae <allan@archlinux.org>
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-11-26 00:30:14 +0100