summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2011-02-15Use CALLOC for _alpm_graph_new()Pang Yan Han1-11/+2
Change _alpm_graph_new() to use CALLOC to avoid explicit zeroing out of fields in pmgraph_t. Signed-off-by: Pang Yan Han <pangyanhan@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-11diskspace: allow used flag to be toggled for both remove and installDan McGee2-3/+9
Turn it into an enum rather than a boolean, and use a bitmask like we do for reading DB entries. The relevant flag is turned on in our two calculate loops, and anything reading the used flag later can decided which flag (or either) is relevant. This will allow the read-only partition code to be triggered on a remove-only operation, e.g. if /boot was read-only and one tried to remove grub in a sync transaction. Of course, right now, we don't actually run the diskspace check code in the '-R' codepath. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-11Check mountpoint read-only status when checking spaceDan McGee3-4/+25
This is a bit of a stopgap solution for the problem, but an easier one than revamping the file conflict checking code to support the same stuff. Using some more gross autoconf magic, figure out which struct field we need to look at to determine read-only status and store that on our mountpoint struct. If we find out we needed this partition after calculating size requirements, then toss an error. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-11diskspace: use calloc instead of mallocDan McGee1-10/+2
Prevents us from having to manually zero out several of our fields. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-11Fix mount dir length calculationDan McGee1-3/+3
In the getmntinfo() section, the local variable mnt doesn't exist; this would have caused a compile error if I had tested the code on such a platform. Unify both codepaths to just run strlen() on the already copied mount path instead. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-11Avoid a memmove by advancing value pointerDan McGee1-0/+1
In packages, our description file contains: key = value is here type entries, and we passed "key " and " value is here" to our strtrim function, causing us to always memmove the value portion to remove the space. Since this is a throwaway buffer, do the advancing on our own before trimming to save the need to shift memory around; "value is here" will now be passed and strtrim will be responsible for trailing whitespace. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-11Fix fileconflict progress with only one packageDan McGee1-2/+4
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-11Ensure pkgbase/epoch are defined before doing anythingDan McGee1-3/+4
When generating integrity sums, we could get some weird output before due to epoch being uninitialized: /usr/bin/makepkg: line 234: [[: 2.6.37: syntax error: invalid arithmetic operator (error token is ".6.37") Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-08Skip diskspace checking for symlinks and directories in all casesDan McGee2-42/+44
We did this in some but not all cases, assuming the 0 value coming out of libarchive would not be a problem. However, this does not work for "fake" filesystems such as rpc_pipefs, which reports a free block and total block count of zero. Fix this by not ever counting symlinks or directories, and adding a note explaining that if we someday do count directories, their size needs to be attributed to the proper place. This patch also includes a few cleanups/performance tweaks- avoid calling strlen() on the mountpoint directory string as much by storing this size in our mountpoint struct, and push the snprintf() call up to the calculate functions since we were already doing it here in the remove case. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-08Refactor out common code in pkghash add functionsPang Yan Han1-30/+15
The overlapping code in _alpm_pkghash_add() and _alpm_pkghash_add_sorted() are now in a new static function pkghash_add_pkg(). This function has a third flag parameter which determines whether the package should be added in sorted order. Signed-off-by: Pang Yan Han <pangyanhan@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-08Handle null pkgcache for local/sync db_populate()Pang Yan Han2-1/+11
In sync_db_populate() and local_db_populate(), a NULL db->pkgcache is not caught, allowing the functions to continue instead of exiting. A later alpm_list_msort() call which uses alpm_list_nth() will thus traverse invalid pointers in a non-existent db->pkgcache->list. pm_errno is set to PM_ERR_MEMORY as _alpm_pkghash_create() will only return NULL when we run out of memory / exceed max hash table size. The local/sync db_populate() functions are also exited. Signed-off-by: Pang Yan Han <pangyanhan@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-06makepkg: more bash-3.2 compatibilityAllan McRae1-2/+2
Adding the "|| true" to the subshell prevents bash-3.2 setting off the error_trap but requires changing the if statement. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-06Merge branch 'maint'Dan McGee9-177/+6635
2011-02-06Remove redundant _alpm_strtrim() in be_local.cPang Yan Han1-9/+9
When reading the "desc" file in _alpm_local_db_read(), some strings are trimmed and checked for length > 0 before their use/duplication subsequently. They are then trimmed again when there is no need to. The following code snippet should illustrate it clearly: while(fgets(line, sizeof(line), fp) && strlen(_alpm_strtrim(line))) { char *linedup; STRDUP(linedup, _alpm_strtrim(line), goto error); info->groups = alpm_list_add(info->groups, linedup); } This patch removes the redundant _alpm_strtrim() calls in _alpm_local_db_read() such as the one inside the STRDUP shown above. Signed-off-by: Pang Yan Han <pangyanhan@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-04Handle PM_ERR_WRITE in alpm_strerror()Pang Yan Han1-0/+2
PM_ERR_WRITE is defined in alpm.h but not handled in alpm_strerror(). This patch corrects that. Signed-off-by: Pang Yan Han <pangyanhan@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-04Add new translations from TransifexDan McGee8-0/+6620
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-04Add updated Kazakh translation from TransifexDan McGee1-177/+15
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-04Update translation file indexes and MakevarsDan McGee4-4/+9
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-04Add comment about download file resolutionDan McGee1-0/+8
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-04Merge remote-tracking branch 'allan/hash'Dan McGee23-92/+647
2011-02-04Add more error checking and loggingDan McGee3-2/+8
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-04Ensure found files are actually filesDan McGee2-3/+4
We located files in a few places but didn't check if they were files or directories. Ensure they are actually files using stat() and S_ISREG(); this showed itself when trying to download to the directory name itself in FS#22645. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-04Improve pkghash_remove algorithmDan McGee1-19/+43
Rather than potentially move every item to the next NULL, attempt to move at most one item at a time by iterating backwards from the NULL location in the hash array. If we move an item, we repeat the process on the now shorter "chain" until no more items need moving. Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2011-02-04Use alpm_list_remove_item in pkghash_removeDan McGee1-31/+4
Removes the code that was duplicated and has now been refactored into a separate method. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-04Add new alpm_list_remove_item() functionDan McGee2-33/+54
This takes in the list and a list item, and does the pointer dance necessary to remove it from the list regardless of whether it is first, last, or somewhere in the middle. It is useful for callers that already know what item needs to be removed and have a pointer to it rather than doing a search by data that the plain alpm_list_remove() does. Refactor alpm_list_remove() to use this function as well. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-04Add a new removal smoke testDan McGee2-5/+23
Hint: this will really stress hash table removal. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-04Actually remove packages from pkghash on removalAllan McRae3-10/+31
Fully removes a package from the hash. Also unify prototype with removal from an alpm_list_t, fixing issues when removing a package from the pkgcache. Signed-off-by: Allan McRae <allan@archlinux.org>
2011-02-04Refactor finding position for new hash entryAllan McRae1-19/+18
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-02-04Rehash efficientlyAllan McRae1-3/+21
Rehash without recreating the hash table list or reallocating the memory for holding the list nodes. Signed-off-by: Allan McRae <allan@archlinux.org>
2011-02-04Slightly more efficient rehash size selectionAllan McRae1-2/+4
While probably still not optimal in terms of everyday usage in pacman, this reduces the absolute size increase to "more reasonable" levels. For databases greater than 5000 in size, the minimum size increase is used which is still on the order of a 10% increase. Signed-off-by: Allan McRae <allan@archlinux.org>
2011-02-04Error handling for maximum database sizeAllan McRae1-0/+12
Check that the requested size of a pkghash is not beyond the maximum prime. Also check for successful creation of a new hash before rehashing. Signed-off-by: Allan McRae <allan@archlinux.org>
2011-02-04Change default sync hash table sizing to 66% fullDan McGee1-2/+2
Since the sync database never changes size once we initialize it, we allow it to be filled a bit more. This reduces the overall memory footprint needed by the hash table. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-04Implement a quick and dirty rehash functionDan McGee1-11/+16
This allows us to get through the rehash required by smoke001 and pass all pactests. It is by no means the best or most efficient implementation but it does do the job. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-04Read pkgcache into hashAllan McRae16-52/+94
Read the package information for sync/local databases into a pmpkghash_t structure. Provide a alpm_db_get_pkgcache_list() method that returns the list from the hash object. Most usages of alpm_db_get_pkgcache are converted to this at this stage for ease of implementation. Review whether these are better accessing the hash table directly at a later stage. Signed-off-by: Allan McRae <allan@archlinux.org>
2011-02-04Get estimated package count when populating databasesDan McGee2-2/+70
This works for both local and sync databases in slightly different ways. For the local database, we can use the directory hard link count on the local/ folder. For sync databases, we use the archive size coupled with some computed average per-package sizes to determine an estimate. This is currently a dead assignment once calculated, but could be used to set the initial size of a hash table. Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2011-02-04Add a hash table for holding packagesAllan McRae4-0/+352
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-02-03makepkg: initialize local arrays to emptyAllan McRae1-3/+3
Fixes bash-3.2 compatibility. Thanks-to: Dave Reisner <d@falconindy.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-03makepkg: error on invalid optdependsAllan McRae1-0/+1
Missed in commit a88cb03a. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-03makepkg: make SRCPKGDEST default to $startdirCedric Staniewski2-3/+3
The current behaviour, which is placing source packages in PKGDEST if SRCPKGDEST is not set, is inconsistent with {SRC,PKG}DEST handling and there is no real advantage in doing so. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-03makepkg: Fix the check for references to srcdir/pkgdirNezmer1-2/+2
At least in FreeBSD, find always returns 0 if it finds stuff (imagine that). It doesn't care about the exit status of whatever is passed to -exec. This patch makes the checks compatible with this behaviour. Using xargs and not using grep directly because packages with too many files would cause grep to complain about argument list being too long. This should also fix the false positive in packages with no files. Signed-off-by: Nezmer <git@nezmer.info> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-01makepkg: fix indention to follow style guideCedric Staniewski1-8/+8
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-01Fix locale.h/setlocale inclusion with --disable-nlsDan McGee4-6/+3
Noted in FS#22697. When I factored out _alpm_parsedate() into a common function, I didn't move the <locale.h> include properly, causing a build failure when NLS is disabled and this header isn't automatically included everywhere. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-31make -d less strict; add -dd optionFlorian Pritz8-18/+21
-d skips checking the version of a dependency. -dd skips the whole dependency check. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Florian Pritz <bluewind@server-speed.net> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-31alpm/depcmp: new NODEPVERSION flagXavier Chantry3-9/+37
This flag allows to disable version checking in dependency resolving code. depcmp_tolerant respects the NODEPVERSION flag but we still keep the original strict depcmp. The idea is to reduce the impact of the NODEPVERSION flag by using it in fewer places. I replaced almost all depcmp calls by depcmp_tolerant in deps.c (except in the public find_satisfier used by deptest / pacman -T), but I kept depcmp in sync.c and conflict.c Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-31add pactests for -SddXavier Chantry6-0/+103
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-31Allow both cleanmethod values to be specified at the same timeDan McGee6-50/+117
No reason to disallow this- it allows keeping even more packages around in the cache. Test cases included for this case and to ensure the default behavior is preserved. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-31Style cleanups in clean cache codeDan McGee1-7/+9
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-31Add three clean cache testsDan McGee3-0/+68
The first two are rather standard tests of our two available clean options, and the third is attempting to test a reported bug (and failing to make the given case fail). Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-31pactest: allow checking for cache file existenceDan McGee2-1/+25
This will allow some tests to be added for cache cleaning. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-31libalpm: fix db_update documentationXavier Chantry1-12/+13
return codes were mixed up Signed-off-by: Dan McGee <dan@archlinux.org>
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-11-05 17:39:33 +0100