summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2011-08-30pacman-key: fix broken logic around updating trust databaseDan McGee1-4/+10
Any option that flips UPDATEDB=1 doesn't work right now due to what we thought was a good idea in commit cab1379a1ab14. Fix this by not including the update operation in the option count and special casing it where necessary. Also, bring back the helpful "Updating trust database" message. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-30Run pacman test-suite with LC_ALL=CAllan McRae1-1/+1
Running the pacman test-suite in a non-English locale results in a few failures. Force the test-suite to run with LC_ALL=C. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-30Streamline alpm_splitdep() comparisonsDan McGee1-13/+19
This reduces from 5 to 3 the number of searches needed on the string looking for a comparison operator, since we can so a second quick comparison looking for '=' if we find '<' or '>'. It also makes every search doable with strchr() or memchr() rather than the slower strstr() method. In testing, only 10% of splitdep calls (~1600 / 16000) during an -Ss database load found a version comparison operator, so optimizing the not found path to be require less work makes sense. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-30pacsort: use boolean, not binary OR operationDave Reisner1-1/+1
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29Rework scriptlet tests to not depend on pacman outputDan McGee2-16/+10
This actually does something in a scriptlet we can check with our normal set of rules, rather than relying on pacman debug output. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29Merge branch 'allan/pacman-key'Dan McGee3-108/+139
2011-08-29_alpm_splitdep(): don't pass bogus length value to strndupDan McGee1-1/+5
If we fell through to the ALPM_DEP_MOD_ANY case, ptr would be NULL, and we would pass (0 - <str>), which is a rather large negative number or bogus positive number, depending on signed/unsigned. Just use strdup in the case where we don't have a ptr available. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29Database read optimizationsDan McGee2-2/+11
Hard to believe there was still more room to improve on this, but I found an easily correctable oversight tonight. Our databases (both sync and local) contain many blank lines, and we were not moving onto the next line right away in these cases; instead we would proceed through our strcmp() conditional checks as normal. Some local numbers follow to show the effects of this patch: Sync `-Ss foobarbaz`: 71,709 blank lines skipped early ~1,505,889 strcmp() calls avoided (21 per line) ~15% speed improvement (.210 --> .179 sec) Local `-Qs foobarbaz`: 6,823 blank lines skipped early 115,991 strcmp() calls avoided (17 per line) ~6% speed improvement (.080 -> .071 sec) Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29Allow access to package origin dataDan McGee7-10/+21
Add new alpm_pkg_get_origin() method, use it in the front end now that the enum constants are publicly available. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29Removed multiple definitions of pkgfrom_tDiogo Sousa5-16/+9
libalpm now exports type alpm_pkgfrom_t in alpm.h, which may be used by frontends. Pacman now uses alpm_pkgfrom_t instead of replicating that type (pkg_from as was in src/pacman/package.h) Updated API change in README. Signed-off-by: Diogo Sousa <diogogsousa@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29pacman-key: have --init add more options to default gpg.confDan McGee1-5/+22
This adds a add_gpg_conf_option() helper function which tries to be intelligent and only add not found options, and those which have not been explicitly commented out. The new options added are 'no-greeting', 'no-permission-warning', and a default 'keyserver'. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29pacman-key: refine permission and locking checksDan McGee1-3/+3
* secring.gpg can be 600, readable by root user only * ensure grep for lock-never option in check_keyring doesn't catch comments Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29pacman-key: rework and document holding keys in keyringAllan McRae2-9/+11
The HoldKey option was undocumented and was not suited for pacman.conf. Instead use the file "/etc/pacman.d/gnupg/heldkeys" to contain a list of keys not to be removed from the pacman keyring with the --populate option. Signed-off-by: Allan McRae <allan@archlinux.org>
2011-08-29pacman-key: Improve documentation for --populateAllan McRae1-4/+15
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-08-29pacman-key: update trust database for relevant operationsAllan McRae1-12/+9
After most operations that touch the keyring, it is a good idea to always run a check on the trustdb as this prevents gpg complaining on later operations. Inspiration-from: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2011-08-29pacman-key: import everything then revoke on --populateAllan McRae1-13/+10
The optimization of only importing keys that were not to be later revoked was a not smart enough. For example, if a key was in both a repos keyring and its revoke list, alternate runs of pacman-key --populate would add then remove the key from the pacman keyring. This problem is made worse when considering the possibility of multiple keyrings being imported. Instead, import all keys followed by the revoking of all keys. This may result in a key being added then revoked, but that is not much of an issue given that is a very fast operation. Signed-off-by: Allan McRae <allan@archlinux.org>
2011-08-29pacman-key: rework importing distro/repo provided keyringsAllan McRae3-76/+83
The current --reload option, apart from being non-clear in its naming, is very limited in that only one keyring can be provided. A distribution may want to provide multiple keyrings for various subsets of its organisation or custom repo providers may also want to provide a keyring. This patch adds a --populate option that reads keyrings from (by default) /usr/share/pacman/keyrings. A keyring is named foo.gpg, with optional foo-revoked file providing a list of revoked key ids. These files are required to be signed (detached) by a key trusted by pacman-key, in practice probably by the key that signed the package providing these files. The --populate flag either updates the pacman keyring using all keyrings in the directory or individual keyrings can be specified. Signed-off-by: Allan McRae <allan@archlinux.org>
2011-08-29Better error handling out of package load methodDan McGee3-3/+16
There are many other ways to fail a package load other than "file not found". We should also use the correct error code in this case. Clean it up a bit in the various callers. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29Refactor some args out of pkg_load_internalDan McGee3-36/+36
Just pass the entire sync package in if we have it; that way we can do any necessary operations involving it rather than have a parameter list growing endlessly. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29Add more info to debug key displayDan McGee1-1/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29Refactor signature result return formatDan McGee6-68/+82
I was trying to take a shortcut and not introduce a wrapper struct for the signature results, so packed it all into alpm_sigresult_t in the first iteration. However, this is painful when one wants to add new fields or only return information regarding a single signature. Refactor the type into a few components which are exposed to the end user, and will allow a lot more future flexibility. This also exposes more information regarding the key to the frontend than was previously available. The "private" void *data pointer is used by the library to store the actual key object returned by gpgme; it is typed this way so the frontend has no expectations of what is there, and so we don't have any hard gpgme requirement in our public API. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29lib/libalpm/signing.c: Fix memory leak in decode_signature() in case of error.Diogo Sousa1-0/+1
Signed-off-by: Diogo Sousa <diogogsousa@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29lib/libalpm/util.c: Fix two memory leaksLukas Fleischer1-0/+2
Free "md5sum" if md5_file() fails in alpm_compute_md5sum(). Free "sha256sum" if sha2_file() fails in alpm_compute_sha256sum(). Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29Check local database status flag in db_write sanity check blockDan McGee1-5/+1
Do all the checks at once; this also avoids the 'return' call after we have allocated memory for "pkgpath" as well as tweaked the umask. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29be_sync.c: Fix memory leak in alpm_db_update()Lukas Fleischer1-0/+2
Free "syncpath" and restore umask if we fail to grab a lock. Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29pacman.c: Remove redundant strdup() in parsearg_global()Lukas Fleischer1-1/+1
config_set_arch() already calls strdup(). Remove strdup() from the config_set_arch() invocation to avoid a memory leak. Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29Make sync error message smarter on unfound targetsDan McGee1-3/+6
We had two issues here. One is a file with an absolute path passed to -S results in a cryptic error message due to the database name being '\0'. The second is not realizing you should be doing -U instead of -S. Fix both of these to transform this: $ sudo pacman -S /tmp/binutils-2.21.1-2-i686.pkg.tar.xz error: database not found: to this: $ sudo pacman -S /tmp/binutils-2.21.1-2-i686.pkg.tar.xz error: target not found: /tmp/binutils-2.21.1-2-i686.pkg.tar.xz warning: '/tmp/binutils-2.21.1-2-i686.pkg.tar.xz' is a file, did you mean -U/--upgrade instead of -S/--sync? Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29Fix possible mismatched type with several curl argumentsDan McGee1-2/+4
After commit 2e7d0023150664, we use off_t rather than long variables. Use the _LARGE variants of the methods to indicate we are passing off_t sized variables, and cast using (curl_off_t) accordingly. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-26Always process validity value returned by gpgmeDan McGee1-21/+16
Don't force 'never'; you should be checking both the status and validity anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-26Fix small memory leak in sig check codeDan McGee2-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-26strtrim: don't move empty stringDan McGee3-3/+18
There were many cases where the string coming in was a blank line, e.g. "\n\0", length 1. The trim routine starts by trimming leading spaces, thus trimming everything. We would then proceed to do a memmove of the NULL byte, which is completely worthless as we can just assign it instead. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Remove argument from check_pgp_helperDan McGee4-10/+6
This one wasn't all that necessary as we only used it in one place in the function, which can be checked easily enough at the call site. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Remove trans is NULL check in QUESTION/EVENT/PROGRESS macrosDan McGee1-3/+3
trans cannot (and better not) be NULL at any point when these are being called. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Remove short/long label distinctionDan McGee4-20/+16
We only used short labels in one place, and the short label is always the first character of the long label anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Slight refresh of the download progress callbackDan McGee1-10/+22
This cleans up some of the mess we have here. * switch to long units for the download size * omit the .0 decimal part from the download rate * omit the almost always zero HH: from estimated time if eta_h == 0 * Display --:-- if eta_h > 99; formatting was screwed up before The net result of this is we usually have 1 more character to use for filename display. Before: extra 500.9K 1242.4K/s 00:00:00 [######################] 100% community-testing 947.0B 28.2M/s 00:00:00 [######################] 100% multilib 26.5K 405.1K/s 00:00:00 [######################] 100% community 450.6K 1238.3K/s 00:00:00 [######################] 100% After: extra 500.9 KiB 1118K/s 00:00 [######################] 100% community-testing 947.0 B 23M/s 00:00 [######################] 100% multilib 26.5 KiB 255K/s 00:00 [######################] 100% community 450.6 KiB 1211K/s 00:00 [######################] 100% Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Add a few more sizes to humanize_sizes()Dan McGee1-2/+4
Because why the hell not? Exbibyte, zebibyte, and yobibyte are going in, even though nothing bigger than the 2^60 exbibyte can be represented using an off_t variable anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Finish large file download attack preventionDan McGee1-3/+20
This handles the no Content-Length header problem as stated in the comments of FS#23413. We add a quick check to the callback that will force an abort if the downloaded data exceeds the payload size, and then check for this error in the post-download cleanup code. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Use off_t rather than double where possibleDan McGee2-11/+11
Beautiful of libcurl to use floating point types for what are never fractional values. We can do better, and we usually want these values in their integer form anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Add new 'lt' and 'zh_TW' translations from transifexDan McGee9-0/+5564
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Update existing translations from TransifexDan McGee52-786/+1149
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-24Improved alpm_list_mmerge() performance (fixed coding style)Diogo Sousa1-10/+15
Improved alpm_list_mmerge() performance by removing an extra pass to obtain the tail node. This was actually suggested by a TODO comment. Signed-off-by: Diogo Sousa <diogogsousa@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-23vercmp: ensure 2.0a and 2.0.a do not compare equalDan McGee4-4/+15
We had this interesting set of facts conundrum, according to vercmp return values: 2.0a < 2.0 2.0 < 2.0.a 2.0a == 2.0.a This introduces a code change that ensures '2.0a < 2.0.a' as would be expected by the first two comparisons. Unfortunately this stays us a bit further from upstream RPM code, but those are the breaks (in RPM, the versions involving 'a' do in fact compare the same, but they are both greater than the bare '2.0'). Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-23Style-match rpmvercmp code with upstreamDan McGee1-9/+9
Not sure how or why some of this differed, but it is easy enough to set it back to how it was so it is easier to diff. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-23Retrieve default SigLevel value from backend after initial settingDan McGee1-0/+3
This ensures we grab and use the library default once we have processed the global SigLevel setting, but before processing the repo-specific settings. This means the following two configs will now evaluate the same, as the backend currently defaults to 'Optional': Config 1: [options] # nothing here [repo] SigLevel = TrustAll Config 2: [options] SigLevel = Optional [repo] SigLevel = TrustAll Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-23sync: halt file discovery if repo has no serversDave Reisner1-0/+8
This avoids error spam when no servers are configured for a repo and a sync operation is performed: Proceed with installation? [Y/n] y :: Retrieving packages from testing... warning: failed to retrieve some files from testing warning: failed to retrieve some files from testing warning: failed to retrieve some files from testing warning: failed to retrieve some files from testing warning: failed to retrieve some files from testing warning: failed to retrieve some files from testing warning: failed to retrieve some files from testing warning: failed to retrieve some files from testing warning: failed to retrieve some files from testing warning: failed to retrieve some files from testing Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22Fix formatting in pacman-key manpageJakob Gruber1-2/+2
Signed-off-by: Jakob Gruber <jakob.gruber@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22dload: prevent need to copy struct in mask_signal()Dan McGee1-7/+6
Since we store this directly in the download function, just rework mask_signal() to take a pointer to a location to store the original. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22dload: extract tempfile creation to its own functionDave Reisner1-17/+28
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22dload: move (un)masking of signals to separate functionsDave Reisner1-17/+24
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22dload: move curl option setting to static functionDave Reisner1-42/+48
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-11-04 14:46:58 +0100