summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2011-11-21makepkg: trim trailing space from whitespace sensitive varsDave Reisner1-3/+3
This applies to pkgver, pkgrel, and epoch and ensures that any trailing whitespace outside of the context of the variable declaration itself is properly trimmed. The Bash parser will ignore this, and so should we. We don't need to worry about leading space because it would force a syntax error, or fail validation. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-16Update translations from TransifexDan McGee29-310/+356
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-15makepkg.conf: disable motd printing for rsync DLAGENTDave Reisner1-1/+1
Fixes FS#26806. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-15Allow sync_prepare to work in certain cases without sync databasesDan McGee2-10/+19
When doing a bare -U operation on a local package that doesn't pull in any dependencies from the sync databases, we can get away with missing database files. This makes the check conditional on no sync targets found in the target list. This is not the prettiest code here so we have a bit of hackish behavior required to straighten both the behavior and the nonsensical error message out. Addresses FS#26899. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-15Update documentation regarding signature extensionsAllan McRae1-1/+1
Commit e7b56f48 allowed makepkg to handle pgp signatures with the .sign extension. Update the man page to reflect this. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-14Update translations from TransifexDan McGee81-952/+1316
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-14Updates in preparation for 4.0.1 releaseDan McGee5-10/+29
Bump the version, update the translation template files, and fill in NEWS with relevant commits and changes since 4.0.0. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-10makepkg: check for value before using eval'd varDave Reisner1-1/+1
This prevent bsdtar from exploding when install= or changelog= are present without a value. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-07makepkg: handle pgp signatures with .sign extensionAllan McRae1-2/+2
Detached sgnature files with extension .sign are accepted by gnupg. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-03Fix download progress rounding edge caseDan McGee1-2/+5
Allan's original message: Occasionally when the download rate showed 100.0 the output got messed up. This was caused by the rounding of a number between 99.95 and 100. Adjust the threshold to avoid this rounding issue. Dan: make this fix, but also show values between 0 and 9.995 with two decimal places since we have the room. Original-fix-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-02Fix thinko in _alpm_strip_newlineDan McGee1-1/+1
The point of this early compare to NULL byte check was so we could bail early and skip the strcmp() call. Given we weren't doing the check right, this never exited early. Fix it to work as intended. Noticed-by: Pepe Juárez <trulustapa@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-01src/util: link vercmp against .lo, not the .oDave Reisner1-1/+1
This seems to fix FS#26652. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-28dload: remove redundant conditionalDave Reisner1-2/+3
Replacing the strdup when after the first NULL check assures that we get continue with payload->remote_name defined. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-28dload: chmod tempfiles to respect umaskDave Reisner1-1/+12
Dan: fix mask calculation, add it to the success/fail block instead. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-27Introduce ALPM_BUFFER_SIZE constantDan McGee5-19/+25
This takes the place of three previously used constants: ARCHIVE_DEFAULT_BYTES_PER_BLOCK, BUFFER_SIZE, and CPBUFSIZE. In libarchive 3.0, the first constant will be no more, so we can ensure we are forward-compatible by removing our usage of it now. The rest are unified for consistency. By default, we will use the value of BUFSIZ provided by <stdio.h>, which is 8192 on Linux. If that is undefined, a default value is provided. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-27paccache: add vim modelineDave Reisner1-0/+2
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-27paccache: ensure seen/seenarch vars are setDave Reisner1-0/+1
Doesn't do a whole lot of good to compare against values that are never set. Fixes bug where -vvv output wasn't grouping packages together properly. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-27Fix issues with replacing unowned symlinksDan McGee3-18/+19
There aretwo seperate issues in the same block of file conflict checking code here: 1) If realpath errored, such as when a symlink was broken, we would call 'continue' rather than simply exit this particular method of resolution. This was likely just a copy-paste mistake as the previous resolving steps all use loops where continue makes sense. Refactor the check so we only proceed if realpath is successful, and continue with the rest of the checks either way. 2) The real problem this code was trying to solve was canonicalizing path component (e.g., directory) symlinks. The final component, if not a directory, should not be handled at all in this loop. Add a !S_ISLNK() condition to the loop so we only call this for real files. There are few other small cleanups to the debug messages that I made while debugging this problem- we don't need to keep printing the file name, and ensure every block that sets resolved_conflict to true prints a debug message so we know how it was resolved. This fixes the expected failures from symlink010.py and symlink011.py, while still ensuring the fix for fileconflict007.py works. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-27Add some unowned symlink replacement testsDan McGee4-1/+77
These should all prevent installation, and yet two of the three tests currently fail. Not good. The best way to see what is going on here is to diff the three new tests side by side- there is only a small difference between the three tests, and that is in the destination of the symlink in question that should never be overwritten. symlink010.py: myprogsuffix -> myprog symlink011.py: myprogsuffix -> broken symlink012.py: myprogsuffix -> otherprog Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-26Don't realloc a 0-length files array when loading packagesDan McGee1-8/+10
There is some pecular behavior going on here when a package is loaded that has no files, as is very common in our test suite. When we enter the realloc/sort code, a package without files will call the following: files = realloc(NULL, 0); One would assume this is a no-op, returning a NULL pointer, but that is not the case and valgrind later reports we are leaking memory. Fix the whole thing by skipping the reallocation and sort steps if the pointer is NULL, as we have nothing to do. Note that the package still gets marked as 'files loaded', becuase although there were none, we tried and were successful. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-25lib/sync: inform callers of compute_download_size of a partialDave Reisner1-2/+6
Extend the return values of compute_download_size to allow callers to know that a .part file exists for the package. This extra value isn't currently used, but it'll be needed later on. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-25Fix libtool detection of --as-needed flagAllan McRae1-3/+6
The fix for -Wl,--as-needed in commit b0f9477f assumes that --as-needed/--no-as-needed is the only option given in a -Wl line. However, it is perfectly valid to specify multiple flags comma separated after a single -Wl (e.g. the default LDFLAGS in Arch Linux makepkg.conf). Adjust the fix so it detect --as-needed in a more general context > readelf -d lib/libalpm/.libs/libalpm.so.?.?.? | grep NEEDED | wc -l Before: 13 After: 5 Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-25Update libtool filesAllan McRae2-35/+51
Update for libtool-2.4.2 while keeping the fix for --as-needed from commit b0f9477f. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-24Add more logging to download codeDan McGee1-3/+11
This adds a logger to the CURLE_OK case so we can always know the return code if it was >= 400, and debug log it regardless. Also adjust another logger to use the cURL error message directly, as well as use fstat() when we have an open file handle rather than stat(). Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21bacman: pkgrel does not have to be an integerlolilolicon1-1/+1
pkgrel, as with pkgver, simply mustn't contain hyphens. Signed-off-by: lolilolicon <lolilolicon@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21Remove remaining usages of fprintf() from frontendDan McGee2-4/+5
These can either be replaced with pm_printf() if they are error related, or in the fprintf(stdout, ...) case a bare printf() will do. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21Remove pm_fprintf() in favor of pm_printf()Dan McGee8-60/+47
Now that pm_printf() always prints to stderr, we don't need this second function that was always used with stderr as the first argument. Thus, this patch removes the function and makes the following sed replacement: sed -i -e 's#pm_fprintf(stderr, #pm_printf(#g' src/pacman/*.c Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21Use stderr as output stream for pm_printf()Dan McGee1-1/+1
This matches what we now do in our backend callback function- all debug/info/warning/error/etc. messages should be on stderr. These are all the messages with a "warning:" or other type prefix, so does not affect general pacman output. This should fix the output confusion noted in FS#26555. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-17pacman-key: add a default keyserver timeout value on --initDan McGee1-0/+1
The default is supposidely 30 seconds from the gpg manpage, but that sure wasn't what I was seeing- it was somewhere closer to two minutes of silence. Add a more reasonable 10 second timeout value which should be good enough for any keyserver that doesn't totally stink at it's job. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-17Show an error message on failed remote key lookupDan McGee1-2/+2
The absolutely terrible part about this is the failure on GPGME's part to distinguish between "key not found" and "keyserver timeout". Instead, it returns the same silly GPG_ERR_EOF in both cases (why isn't GPG_ERR_TIMEOUT being used?), leaving us helpless to tell them apart. Spit out a generic enough error message that covers both cases; unfortunately we can't provide much guidance to the user because we aren't sure what actually happened. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-17Table display: print message with warning: prefixDan McGee1-1/+2
Use the normal error functions here rather than a bare fprintf(). Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-14makepkg: don't attach traps until after argument parsingDan McGee1-11/+9
Nothing we do in our traps is necessary this early in the script. This fixes FS#26196. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-14Add missing #ifdef around cURL error code in download structDan McGee1-0/+2
Thanks to Eduardo Tongson on the mailing list. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13Coding style cleanupsDan McGee1-5/+5
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13curl_gethost() potential bug fixupsDan McGee1-10/+14
This is in the realm of "probably not going to happen", but if someone were to translate "disk" to a string longer than 256 characters, we would have a smashed/corrupted stack due to our unchecked strcpy() call. Rework the function to always length-check the value we copy into the hostname buffer, and do it with memcpy rather than the more cumbersome and unnecessary snprintf. Finally, move the magic 256 value into a constant and pass it into the function which is going to get inlined anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13doc/index.txt: Reformat past releases chartDan McGee1-41/+94
This makes it a three-column deal with releases all the way back to 1.0. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13doc: update .gitignore, add CSS override for new tables usageDan McGee3-6/+17
* Make all docs depend on Makefile; if we change flags here we want them rebuilt. * Add explicit filenames to .gitignore so we can add our own CSS override file, and add an asciidoc-override.css resource. * Adjust a few asciidoc options when generating HTML. * Remove asciidoc-manpage.css; apparantly this doesn't exist anymore. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13Update NEWS for missing 4.0 stuff and 4.0.1 changes so farDan McGee1-1/+4
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13scripts/*.sh.in: Fix signal handler error messagesLukas Fleischer2-3/+7
This includes some fixes to the messages that are displayed when a signal is caught in makepkg or repo-add: * Instead of always showing "==> ERROR: TERM signal caught. Exiting...", replace "TERM" by whatever signal is actually caught. * Fix a typo in the SIGERR error message in repo-add ("occurred" instead of "occured"). Francois already fixed this for makepkg in 1e51b81c. Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13repo-add: Avoid race condition in signal handlersLukas Fleischer1-2/+8
There is a small chance that a user sends SIGINT (or any other signal that is trapped) when we're already in clean_up() which used to lead to trap_exit() being executed and the remaining code in clean_up() being skipped due to the bash signal/trap handler blocking EXIT (since its handler is already being executed, even if it's interrupted). In practice, this behaviour caused unexpected results (primarily because pressing ^C at the wrong time left a lock file behind): $ ./repo-add extra.db.tar.gz foobar ==> Extracting database to a temporary location... ^C ==> ERROR: Aborted by user! Exiting... $ ./repo-add extra.db.tar.gz foobar ==> Extracting database to a temporary location... ==> ERROR: File 'foobar' not found. ==> No packages modified, nothing to do. ^C ==> ERROR: Aborted by user! Exiting... $ ./repo-add extra.db.tar.gz foobar ==> ERROR: Failed to acquire lockfile: extra.db.tar.gz.lck. ==> ERROR: Held by process 18522 Fix this and reduce the chance of race conditions in signal handlers by: * Unhooking all traps in both clean_up() and trap_exit(). * Call clean_up() explicitly in trap_exit() to make sure we remove the lock file and the temporary directory even if we send SIGINT when clean_up() is already being executed but didn't reach the unhook code yet. Also, add an optional parameter to clean_up() to allow for setting an explicit exit code when we call clean_up() from trap_exit(). Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13Add user-visible warning message if public keyring not foundDan McGee1-0/+3
This should help point users in the right direction if they have not initialized via pacman-key just yet. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12signing: delay gpgme_init() until latest possible momentDan McGee1-19/+27
In the default configuration, we can enter the signing code but still have nothing to do with GPGME- for example, if database signatures are optional but none are present. Delay initialization of GPGME until we know there is a signature file present or we were passed base64-encoded data. This also makes debugging with valgrind a lot easier as you don't have to deal with all the GPGME error noise because their code leaks like a sieve. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12VerbosePkgLists: format table lines in i18n-compatible wayDan McGee2-43/+49
This had the unfortunate implementation detail that depended on the strings having 1 byte == 1 column hold true. As we know, this is not at all the case once you move past the base ASCII character set. Reimplement this whole thing so it doesn't depend on format strings at all. Instead, simply calculate the max column widths, and then when displaying each row add the correct amount of padding using UTF-8 safe string length functions. Before: 名字 旧版本新版本 净变化 下载大小 libgee 0.6.2.1-1 0.60 MiB 0.10 MiB libsocialweb 0.25.19-2 1.92 MiB 0.23 MiB folks 0.6.3.2-1 1.38 MiB 0.25 MiB After: 名字 旧版本 新版本 净变化 下载大小 libgee 0.6.2.1-1 0.60 MiB 0.10 MiB libsocialweb 0.25.19-2 1.92 MiB 0.23 MiB folks 0.6.3.2-1 1.38 MiB 0.25 MiB Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12Bump version to 4.0.0v4.0.0Dan McGee2-1/+3
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12Final Transifex update before 4.0Dan McGee12-998/+1182
We have a few incomplete translations, but these should be addressable before the 4.0.1 maint release that is surely not that far in the future. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11pactest: add a better descriptionDan McGee1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11Add note to TRANSLATORS regarding TransifexDan McGee1-9/+8
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11pacman-key: don't escape single quote in usage messageDan McGee1-1/+1
This screws up gettext and causes the message to display always untranslated. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11Document verifying source file signatures in makepkgAllan McRae1-0/+4
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11Fix typo in PKGBUILD man pageAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>