summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2010-01-20makepkg: Introduce $SRCPKGDESTNezmer2-2/+7
Introduce $SRCPKGDEST to define a destination dir for source packages instead of saving them in $PKGDEST with binary packages. The simple patch doesn't break old behavior. Signed-off-by: Nezmer <git@nezmer.info> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-12-15makepkg: check for non-empty pkgbase instead of pkgnameCedric Staniewski1-1/+1
pkgbase is used in the following rm calls, and since pkgname can be present when pkgbase is not, it is safer to check for pkgbase. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-12-14makepkg: remove srclinks directory on error exitCedric Staniewski1-0/+1
When makepkg exits in create_srcpackage(), the (temporary) srclinks directory is left behind. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-12-14makepkg: skip devel_check() when repackagingNezmer1-3/+3
Currently, "makepkg -R" creates a package with a wrong updated $pkgver. Signed-off-by: Nezmer <Nezmer@allurelinux.org> [Allan: adjusted comment] Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-12-14makepkg: limit sudo usage to allowed pacman commandsCedric Staniewski1-1/+1
This is particularly useful when using pacman wrappers which call sudo by themselves and therefore should not be run as root. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-12-14makepkg: allow to specify an alternative pacman commandCedric Staniewski2-8/+20
If PACMAN environment variable is set, makepkg will try to use this command to check for installed dependencies and to install or remove packages. Otherwise, makepkg will fall back to pacman. Implements FS#13028. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> [Dan: move envvar section in manpage] Signed-off-by: Dan McGee <dan@archlinux.org>
2009-12-14makepkg: check for references to build root in packageAllan McRae1-0/+5
Add a check that the package does not contain references to the folder it was built in. Fixes FS#14751 Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-12-14improve download_internal error messagesXavier Chantry1-2/+8
download_internal is supposed to always set pm_errno but did not in many cases. The most important (and tested) change is the one concerning fetchStat. This is typically where the code will fail when the network is down for example. Before commit d2dbb04a9af7a18da, this fetchStat call did not exist and the same kind of errors would be encountered in the fetchXGet call that follows. I just copied the error printing to restore the old behavior. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-12-14add some more sanity check for optargXavier Chantry1-1/+15
getopt should already ensure that optarg is not NULL when an argument is required, but just be extra safe and double check it before using optarg. To be honest, I only did that to make clang shut up and eliminate the last warnings it reported. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-12-14refactor _parseoptionsXavier Chantry1-138/+170
This function was quite huge (~230 lines) and difficult to parse, now it is slightly better. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-12-14Print error on duplicated database entriesNagy Gabor1-0/+7
Some users reported duplicated database entries in /var/lib/pacman/local/, for example, both foo-1.0-1 and foo-2.0-1 subdirectories existed. (Bogus 3rd-party scripts, backup?) In this case pacman reported no error and its behaviour was mysterious. From now on, pacman detects this situation and prints an error message. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-12-14Remove trailing whitespace on all lines in list_displayDan McGee1-4/+6
This ensures we never have trailing whitespace. Take the following text, with line numbers added for clarity: 1. Title : item1 item2 item3 item4 2. item5 item6 item7 item8 3. item9 itemA itemB itemC Laszlo Papp helpfully pointed out we would have two trailing spaces on line three after the last item. However, we also had these trailing spaces on lines one and two, which the initial patch didn't take care of. This can be seen on something like `pacman -Qi glibc`. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-12-08Fix requiredby outputDan McGee1-1/+1
This is a bit embarrassing. For example: $ pacman -Qi mesa ... Required By : mesa mesa mesa mesa mesa mesa Something is clearly not right, and the problem was introduced in commit 0bc961. Fix the issue by getting the package name off the correct variable. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-12-01bash_completion: use absolute paths to utilitiesDan McGee1-14/+14
Fixes issues noted in FS#16630. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-12-01makepkg: allow specifying subsets of packages to buildAllan McRae2-1/+22
This allows makepkg to only build a specified subset of packages from a split PKGBUILD. This is very useful in combination with the -R flag or when bumping the pkgrel of a single package. Fixes FS#15956. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-12-01makepkg: move pacman calls to a functionCedric Staniewski1-25/+16
Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-12-01makepkg: Place packages symlinks in build dir when PKGDEST is usedEric Bélanger1-5/+24
When PKGDEST is used, symlinks to the packages will be put in the build directory. This combines the convenience of a global package cache with the ease of having a package (i.e. a symlink) in the build directory for testing and installation purpose. Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com> [Allan: add comment documenting clean-up addition] Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-12-01Replace an ugly while [ with a for (( loopIsaac Good1-3/+2
Signed-off-by: Isaac Good <pacman@isaac.otherinbox.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-16Fix syntax error in new translationDan McGee1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-16HACKING: add some notes about valgrind/gdb usageDan McGee1-0/+13
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-16download: major refactor to address lingering issuesDan McGee5-155/+141
Sorry for this being such a huge patch, but I believe it is necessary for quite a few reasons which I will attempt to explain herein. I've been mulling this over for a while, but wasn't super happy with making the download interface more complex. Instead, if we carefully order things in the internal download code, we can actually make the interface simpler. 1. FS#15657 - This involves `name.db.tar.gz.part` files being left around the filesystem, and then causing all sorts of issues when someone attempts to rerun the operation they canceled. We need to ensure that if we resume a download, we are resuming it on exactly the same file; if we cannot be almost postive of that then we need to start over. 2. http://www.mail-archive.com/pacman-dev@archlinux.org/msg03536.html - Here we have a lighttpd bug to ruin the day. If we send both a Range: header and If-Modified-Since: header across the wire in a GET request, lighttpd doesn't do what we want in several cases. If the file hadn't been modified, it returns a '304 Not Modified' instead of a '206 Partial Content'. We need to do a stat (e.g. HEAD in HTTP terms) operation here, and the proceed accordingly based off the values we get back from it. 3. The mtime stuff was rather ugly, and relied on the called function to write back to a passed in reference, which isn't the greatest. Instead, use the power of the filesystem to contain this info. Every file downloaded internally is now carefully timestamped with the remote file time. This should allow the resume logic to work. In order to guarantee this, we need to implement a signal handler that catches interrupts, notifies the running code, and causes it to set the mtimes on the file. It then rethrows the signal so the pacman signal handler (or any frontend) works as expected. 4. We did a lot of funky stuff in trying to track the DB last modified time. It is a lot easier to just keep the downloaded DB file around and track the time on that rather than in a funky dot file. It also kills a lot of code. 5. For GPG verification of the databases down the road, we are going to need the DB file around for at least a short bit of time anyway, so this gets us closer to that. Signed-off-by: Dan McGee <dan@archlinux.org> [Xav: fixed printf with off_t] Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2009-11-16Refactor do/while cycle and multiple while cyclesLaszlo Papp3-6/+14
* It makes the code clearer to read/understand * Cppcheck tool doesn't show this anymore: [./util.c:215]: (error) Resource leak: fd [Dan: don't change the coding style] Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-16makepkg: Fixed logging for split packagesEric Bélanger1-2/+2
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-16makepkg: allow the use of only a package() functionCedric Staniewski2-10/+19
For some packages, generally the 'any' arch ones, a build step is not required and therefore can be skipped. In these cases, a package() function without a build() one is sufficient. As a side effect, this commit makes meta packages without any function at all in the PKGBUILD possible. Fixes FS#15147. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-16makepkg: extend test for hyphen prefixes to pkgbase and all pkgnamesCedric Staniewski1-2/+11
Since commit fb97d32, which brought in this test, support for split PKGBUILDs was added, and therefore, all values of pkgname and also pkgbase have to be checked now. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-16makepkg: Add fallback to package functionAllan McRae1-4/+6
makepkg looks for a package() function when building a single package but package_$pkgname() style package functions when building a split package. This patch allows the use of a package_$pkgname() function when building a single package for consistency. This is achieved by having makepkg consider a non-split package with a package_$pkgname() function as a split package (creating just the one package). Fixes FS#16622. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-16makepkg: use bash test operators, part twoIsaac Good1-109/+107
* FS#16623, second half of makepkg * Includes stuff like -o to ||, -a to &&, etc. * if [ $(type ... preserved due to a bash bug with [[ and set -e and ERR traps Signed-off-by: Isaac Good <pacman@isaac.otherinbox.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-16makepkg: use bash test operators, part oneIsaac Good1-100/+100
* FS#16623, first half of makepkg * Includes stuff like -o to ||, -a to &&, etc. * if [ $(type ... preserved due to a bash bug with [[ and set -e and ERR traps Signed-off-by: Isaac Good <pacman@isaac.otherinbox.com> [Dan: made commit message useful] Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-16scripts: replace test builtin [ with shell keywords [[ and ((Cedric Staniewski4-65/+65
FS#16623 suggested this change for makepkg; this patch applies it to the remaining files in the scripts directory. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-16pacman.conf : enable resuming for curlXavier Chantry1-1/+1
Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-16makepkg: Clarified error message when a sourceball exist alreadyEric Bélanger1-1/+1
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-16makepkg: fix abortion after sourcing /etc/profileCedric Staniewski1-3/+4
The source command triggers / might trigger the ERR trap which makes makepkg abort right after a successful installation of missing dependencies. Thanks to Xavier Chantry <shiningxc@gmail.com> for finding this solution. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-16contrib/bacman: fix checking if file has been addedAllan McRae1-2/+2
Fixes FS#17140. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-16Add Catalan translationManuel Tortosa4-0/+2326
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-11Merge branch 'maint'Dan McGee6-11/+18
2009-11-10Necessary updates for 3.3.3 releasev3.3.3Dan McGee3-2/+12
Should cover everything worth mentioning in NEWS, plus the version number bumps as usual. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-10makepkg: quote arrays in order to preserve spaces in array itemsCedric Staniewski1-7/+2
Fixes FS#16871 and makes the pkgdesc workaround obsolete. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-28Fix opendir error condition checksDan McGee2-2/+4
Thanks to Laszlo Papp <djszapi@archlinux.us> for the following catch: opendir(path)) == (DIR *)-1; is maybe the result of misunderstanding the manpage. If an opendir() call isn't successful it returns NULL rather than '(DIR *)-1'. Noticed-by: Laszlo Papp <djszapi@archlinux.us> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-27Merge branch 'maint'Dan McGee1-3/+3
2009-10-24Fix a small typo in alpm_list.cLaszlo Papp1-1/+1
Signed-off-by: Laszlo Papp <djszapi@archlinux.us> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-24makepkg: allow passing arguments with spacesAllan McRae1-3/+3
Currently makepkg takes the commandline arguments, assigns them to a variable and passes that variable to the next makepkg call (within fakeroot). Use a comination of quotes and arrays in this process to ensure any arguments passed within quotes and containing spaces stay as a single argument during the second makepkg call. Thanks to Dan for figuring out how to get this working. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-24Merge branch 'maint'Dan McGee1-1/+1
2009-10-24Reduce unnecessary get_name() function callsDan McGee1-3/+3
alpm_pkg_get_name() gives us little benefit in backend code besides a NULL check on the package passed in; we could do that ourself if necessary. By changing to direct references in the cases where we are sure we have a valid package, we save a function call each time we need a package name. This function can't be inlined because it is externally accessible. This cuts the calls to get_name() from 1.3 million times in a pacman -Qu operation to around 2400. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-24makepkg: change preselected option for cleaning the cache from Y to NCedric Staniewski1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-24makepkg: use tput for terminal-safe colored and bold textCedric Staniewski1-7/+7
Suggested-by: Dan McGee <dan@archlinux.org> Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-24makepkg: define escape sequences globallyCedric Staniewski1-27/+13
In doing so, it is possible to get rid of all the tests for colored messages except for one global one. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-24makepkg: check for non-empty pkgbase instead of pkgnameCedric Staniewski1-1/+1
pkgbase is used in the following rm calls, and since pkgname can be present when pkgbase is not, it is safer to check for pkgbase. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-24pacdiff : add diffsearchpath optionHeiko Baums1-2/+6
Xav: added doc Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-24makepkg: remove empty .part files after a failed downloadCedric Staniewski1-1/+6
Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-21makepkg: fix testing for built package presenceAllan McRae1-2/+2
Commit c7e4d10d introduced a small error in the testing of whether a package is already built. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-11-05 08:09:59 +0100