summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2012-01-05Search for PGP subkeys in a keyserver-acceptable wayDan McGee1-5/+21
PGP keyservers are pieces of sh** when it comes to searching for subkeys, and only allow it if you submit an 8-character fingerprint rather than the recommended and less chance of collision 16-character fingerprint. Add a second remote lookup for the 8-character version of a key ID if we don't find anything the first time we look up the key. This fixes FS#27612 and the deficiency has been sent upstream to the GnuPG users mailing list as well. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-03add new pactest for syncfirst with recursive depsDave Reisner2-0/+130
Add 1 failing for the -Su case, and the same case using -S (and passing). This is based on a real (current) issue of upgrading staging chroots with the new pacman in staging for a libarchive build, and a new toolchain in testing. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-03Prevent rebuild of man pages when using release tarballsAllan McRae1-3/+3
Commit 43cad9c8 made the building of all docs depend on the Makefile. However, the Makefile is generated after running ./configure so is always newer than any pregenerated docs. This means that people building from released pacman tarballs are forced to rebuild the docs (and thus have asciidoc installed). That defeats the purpose of prebuilding the documentation. Have the documentatin depends on Makefile.am instead as this is probably what was intended. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-29Fix bogus string cast in search debug messageDan McGee1-3/+3
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-23pacman-key: Add missing quotesTimothy Redaelli1-3/+3
Signed-off-by: Timothy Redaelli <timothy.redaelli@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-23Allow comments after repo section header in pacman.confAllan McRae1-5/+7
Pacman assumes that the final character of a line specifing a repo in pacman.conf is a "]". But it did not clean whitespace from the line after removing any comments. So lines like: [allanbrokeit] # could break system caused pacman not to recognize the repo. Adjust config parsing to strip comments before trimming whitespace from the end of the string. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-12contrib/paccache: silence possible output from cdDave Reisner1-1/+1
If CDPATH is set, this could possibly write to stdout. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-12pacsysclean: Add new contrib scriptEric Bélanger3-1/+55
pacsysclean sort installed packages by decreasing installed size. It's useful for finding large unused package when doing system clean-up. This script is an improved version of other similar scripts posted on the forums. Thanks goes to Dan for fixing and improving my original script. Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-06Use correct size in memsetDan McGee1-1/+1
We were using the size of a pointer, not the size of the whole archive_read_buffer struct. Thanks to Clang/LLVM 3.0 and Allan/Dave in IRC for finding this one. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-05repo-add: enforce maximum .sig file sizeDan McGee1-7/+12
This prevents user error in adding a file generated via `gpg --sign` rather than `--detach-sign`, for example. The same 16KiB limit is used we use in our pacman download code. The section is moved above the checksum generation to avoid presenting info messages to the user if the signature isn't valid. Addresses a shortcoming pointed out in FS#27453. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-05Enforce signature download size limit on -U <url> operationsDan McGee1-0/+3
We had a 16 KiB limit on database signatures, we should do the same here too to have a slight sanity check, even if we can't do so for the package itself yet. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-05contrib/paclist: Add "--help" command line parameterLukas Fleischer1-1/+1
Be consistent with all other contrib scripts and support the "--help" command line switch. Fixes FS#27258. Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-01makepkg.5: fix typo s/tar,bz2/tar.bz2/Dave Reisner1-1/+1
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-01makepkg: avoid using comm for diff'ing package listsDave Reisner1-7/+9
Whereas comm will check inputs to see if they're sorted (and warn when they aren't), grep doesn't even care about ordering. In this particular instance -- neither do we. We're only interested that the two lists are equivalent. Fixes FS#26580. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-01_alpm_ldconfig: return value from _alpm_run_chrootDan McGee1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-01Add two new pactests for pacman upgrade behaviorDan McGee2-0/+65
Both currently marked as failing. * sync303.py encapsulates the broken behavior reported in FS#27214. * sync304.py shows how packages depending on a specific version of a package in SyncFirst can cause breakage of the dependency resolver. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-01Miscellaneous post-4.0.1 updatesDan McGee3-12/+13
Some late-arriving translation updates and add the correct dates to the index.txt releases table. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-21Final changes before 4.0.1 releasev4.0.1Dan McGee3-7/+10
* Add last-minute changes to NEWS * Don't treat '_' or '_n' special in scripts when finding translatable strings; this breaks with one use of `read` and a dummy _ variable Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-21makepkg: trim trailing space from whitespace sensitive varsDave Reisner1-3/+3
This applies to pkgver, pkgrel, and epoch and ensures that any trailing whitespace outside of the context of the variable declaration itself is properly trimmed. The Bash parser will ignore this, and so should we. We don't need to worry about leading space because it would force a syntax error, or fail validation. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-16Update translations from TransifexDan McGee29-310/+356
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-15makepkg.conf: disable motd printing for rsync DLAGENTDave Reisner1-1/+1
Fixes FS#26806. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-15Allow sync_prepare to work in certain cases without sync databasesDan McGee2-10/+19
When doing a bare -U operation on a local package that doesn't pull in any dependencies from the sync databases, we can get away with missing database files. This makes the check conditional on no sync targets found in the target list. This is not the prettiest code here so we have a bit of hackish behavior required to straighten both the behavior and the nonsensical error message out. Addresses FS#26899. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-15Update documentation regarding signature extensionsAllan McRae1-1/+1
Commit e7b56f48 allowed makepkg to handle pgp signatures with the .sign extension. Update the man page to reflect this. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-14Update translations from TransifexDan McGee81-952/+1316
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-14Updates in preparation for 4.0.1 releaseDan McGee5-10/+29
Bump the version, update the translation template files, and fill in NEWS with relevant commits and changes since 4.0.0. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-10makepkg: check for value before using eval'd varDave Reisner1-1/+1
This prevent bsdtar from exploding when install= or changelog= are present without a value. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-07makepkg: handle pgp signatures with .sign extensionAllan McRae1-2/+2
Detached sgnature files with extension .sign are accepted by gnupg. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-03Fix download progress rounding edge caseDan McGee1-2/+5
Allan's original message: Occasionally when the download rate showed 100.0 the output got messed up. This was caused by the rounding of a number between 99.95 and 100. Adjust the threshold to avoid this rounding issue. Dan: make this fix, but also show values between 0 and 9.995 with two decimal places since we have the room. Original-fix-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-02Fix thinko in _alpm_strip_newlineDan McGee1-1/+1
The point of this early compare to NULL byte check was so we could bail early and skip the strcmp() call. Given we weren't doing the check right, this never exited early. Fix it to work as intended. Noticed-by: Pepe Juárez <trulustapa@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-01src/util: link vercmp against .lo, not the .oDave Reisner1-1/+1
This seems to fix FS#26652. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-28dload: remove redundant conditionalDave Reisner1-2/+3
Replacing the strdup when after the first NULL check assures that we get continue with payload->remote_name defined. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-28dload: chmod tempfiles to respect umaskDave Reisner1-1/+12
Dan: fix mask calculation, add it to the success/fail block instead. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-27Introduce ALPM_BUFFER_SIZE constantDan McGee5-19/+25
This takes the place of three previously used constants: ARCHIVE_DEFAULT_BYTES_PER_BLOCK, BUFFER_SIZE, and CPBUFSIZE. In libarchive 3.0, the first constant will be no more, so we can ensure we are forward-compatible by removing our usage of it now. The rest are unified for consistency. By default, we will use the value of BUFSIZ provided by <stdio.h>, which is 8192 on Linux. If that is undefined, a default value is provided. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-27paccache: add vim modelineDave Reisner1-0/+2
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-27paccache: ensure seen/seenarch vars are setDave Reisner1-0/+1
Doesn't do a whole lot of good to compare against values that are never set. Fixes bug where -vvv output wasn't grouping packages together properly. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-27Fix issues with replacing unowned symlinksDan McGee3-18/+19
There aretwo seperate issues in the same block of file conflict checking code here: 1) If realpath errored, such as when a symlink was broken, we would call 'continue' rather than simply exit this particular method of resolution. This was likely just a copy-paste mistake as the previous resolving steps all use loops where continue makes sense. Refactor the check so we only proceed if realpath is successful, and continue with the rest of the checks either way. 2) The real problem this code was trying to solve was canonicalizing path component (e.g., directory) symlinks. The final component, if not a directory, should not be handled at all in this loop. Add a !S_ISLNK() condition to the loop so we only call this for real files. There are few other small cleanups to the debug messages that I made while debugging this problem- we don't need to keep printing the file name, and ensure every block that sets resolved_conflict to true prints a debug message so we know how it was resolved. This fixes the expected failures from symlink010.py and symlink011.py, while still ensuring the fix for fileconflict007.py works. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-27Add some unowned symlink replacement testsDan McGee4-1/+77
These should all prevent installation, and yet two of the three tests currently fail. Not good. The best way to see what is going on here is to diff the three new tests side by side- there is only a small difference between the three tests, and that is in the destination of the symlink in question that should never be overwritten. symlink010.py: myprogsuffix -> myprog symlink011.py: myprogsuffix -> broken symlink012.py: myprogsuffix -> otherprog Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-26Don't realloc a 0-length files array when loading packagesDan McGee1-8/+10
There is some pecular behavior going on here when a package is loaded that has no files, as is very common in our test suite. When we enter the realloc/sort code, a package without files will call the following: files = realloc(NULL, 0); One would assume this is a no-op, returning a NULL pointer, but that is not the case and valgrind later reports we are leaking memory. Fix the whole thing by skipping the reallocation and sort steps if the pointer is NULL, as we have nothing to do. Note that the package still gets marked as 'files loaded', becuase although there were none, we tried and were successful. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-25lib/sync: inform callers of compute_download_size of a partialDave Reisner1-2/+6
Extend the return values of compute_download_size to allow callers to know that a .part file exists for the package. This extra value isn't currently used, but it'll be needed later on. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-25Fix libtool detection of --as-needed flagAllan McRae1-3/+6
The fix for -Wl,--as-needed in commit b0f9477f assumes that --as-needed/--no-as-needed is the only option given in a -Wl line. However, it is perfectly valid to specify multiple flags comma separated after a single -Wl (e.g. the default LDFLAGS in Arch Linux makepkg.conf). Adjust the fix so it detect --as-needed in a more general context > readelf -d lib/libalpm/.libs/libalpm.so.?.?.? | grep NEEDED | wc -l Before: 13 After: 5 Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-25Update libtool filesAllan McRae2-35/+51
Update for libtool-2.4.2 while keeping the fix for --as-needed from commit b0f9477f. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-24Add more logging to download codeDan McGee1-3/+11
This adds a logger to the CURLE_OK case so we can always know the return code if it was >= 400, and debug log it regardless. Also adjust another logger to use the cURL error message directly, as well as use fstat() when we have an open file handle rather than stat(). Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21bacman: pkgrel does not have to be an integerlolilolicon1-1/+1
pkgrel, as with pkgver, simply mustn't contain hyphens. Signed-off-by: lolilolicon <lolilolicon@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21Remove remaining usages of fprintf() from frontendDan McGee2-4/+5
These can either be replaced with pm_printf() if they are error related, or in the fprintf(stdout, ...) case a bare printf() will do. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21Remove pm_fprintf() in favor of pm_printf()Dan McGee8-60/+47
Now that pm_printf() always prints to stderr, we don't need this second function that was always used with stderr as the first argument. Thus, this patch removes the function and makes the following sed replacement: sed -i -e 's#pm_fprintf(stderr, #pm_printf(#g' src/pacman/*.c Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21Use stderr as output stream for pm_printf()Dan McGee1-1/+1
This matches what we now do in our backend callback function- all debug/info/warning/error/etc. messages should be on stderr. These are all the messages with a "warning:" or other type prefix, so does not affect general pacman output. This should fix the output confusion noted in FS#26555. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-17pacman-key: add a default keyserver timeout value on --initDan McGee1-0/+1
The default is supposidely 30 seconds from the gpg manpage, but that sure wasn't what I was seeing- it was somewhere closer to two minutes of silence. Add a more reasonable 10 second timeout value which should be good enough for any keyserver that doesn't totally stink at it's job. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-17Show an error message on failed remote key lookupDan McGee1-2/+2
The absolutely terrible part about this is the failure on GPGME's part to distinguish between "key not found" and "keyserver timeout". Instead, it returns the same silly GPG_ERR_EOF in both cases (why isn't GPG_ERR_TIMEOUT being used?), leaving us helpless to tell them apart. Spit out a generic enough error message that covers both cases; unfortunately we can't provide much guidance to the user because we aren't sure what actually happened. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-17Table display: print message with warning: prefixDan McGee1-1/+2
Use the normal error functions here rather than a bare fprintf(). Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-14makepkg: don't attach traps until after argument parsingDan McGee1-11/+9
Nothing we do in our traps is necessary this early in the script. This fixes FS#26196. Signed-off-by: Dan McGee <dan@archlinux.org>