summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2011-09-30pacman-key: return 0 from get_from if default value usedAllan McRae1-1/+4
This prevents the error trap being set off when GPGDir is commented in pacman.conf. Bug introduced in 507b01b9. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-30Remove redundant transaction size outputAllan McRae1-1/+1
Printing all of "Installed", "Removed" and "Net Upgrade" sizes is redundant as the difference of the first two is the last. Instead, only print "Installed Size" and "Net Upgrade Size" when both the installed and removed are non-zero. This results in the following output in the following cases: - package installation only: Installed Size - package removal only: Removed Size - package installation involving replacement: Installed + Net Upgrade Size - package upgrade: Installed + Net Upgrade Size - combination upgrade and installation: Installed + Net Upgrade Size Download Size remains outputted whenever something is downloaded. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-29paccache: allow strictly integer for -k optionlolilolicon1-3/+5
Verify the argument to -k is a non-negative integer. Leading zeros are simply stripped. 'declare -i keep' allowed the argument to -k to be any arithmetic evaluation expression. The simple assignment 'keep=$OPTARG' triggers arithmetic evaluation implicitly, which can either consume a huge amount of resources with input such as '2**2**32' or immediately produce an error on invalid input. Instead, we simply 'declare -- keep' and avoid all that. Signed-off-by: lolilolicon <lolilolicon@gmail.com> Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-29Remove redundant "removal" output in pure remove operationAllan McRae1-0/+3
Printing "[removal]" beside all package names is redundant when all packages are being removed (i.e. when using -R). Signed-off-by: Allan McRae <allan@archlinux.org>
2011-09-29move prevprogress onto payload handleDave Reisner2-8/+4
This is a poor place for it, and it will likely move again in the future, but it's better to have it here than as a static variable. Initialization of this variable is now no longer necessary as its zeroed on creation of the payload struct. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28pkgdelta: proper quoting in [[ expression ]]lolilolicon1-3/+3
Always quote the right-hand side of expression when the == or != operator is used, unless intended as a pattern. Signed-off-by: lolilolicon <lolilolicon@gmail.com>
2011-09-28makepkg: proper quoting in [[ expression ]]lolilolicon1-3/+3
Always quote the righthand side of expression when the == or != operator is used, unless intended as a pattern. Quoting bash(1): When the == and != operators are used, the string to the right of the operator is considered a pattern. Any part of the pattern may be quoted to force it to be matched as a string. Signed-off-by: lolilolicon <lolilolicon@gmail.com>
2011-09-28Refactor display_targets to not be recursiveDan McGee1-33/+26
This also fixes a memory leak and makes the dual-purpose "rows" variable go away in favor of storing the rows and non-verbose names separately. This also fixes some potential memory leaks and/or wrong behavior due to the config->verbosepkglists flag being flipped, which we should never be doing. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Refactor download payload reset and freeDan McGee4-48/+51
This was done to squash a memory leak in the sync database download code. When we downloaded a database and then reused the payload struct, we could find ourselves calling get_fullpath() for the signatures and overwriting non-freed values we had left over from the database download. Refactor the payload_free function into a payload_reset function that we can call that does NOT free the payload itself, so we can reuse payload structs. This also allows us to move the payload to the stack in some call paths, relieving us of the need to alloc space. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Initialize cURL library on first useDan McGee4-40/+44
Rather than always initializing it on any handle creation. There are several frontend operations (search, info, etc.) that never need the download code, so spending time initializing this every single time is a bit silly. This makes it a bit more like the GPGME code init path. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Add more valgrind suppressionsDan McGee1-0/+25
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28verbose package lists: remove errant debuggerDan McGee1-2/+0
Left this in as part of the last set of commits, whoops. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Always show download size if -w/--downloadonly was providedDan McGee2-3/+3
The prompt can be rather confusing otherwise when all files have already been downloaded, but there is not a single total size listed. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Table format creation code cleanupDan McGee1-21/+27
Better scoping of variables for the most part, and ensure we are using string_length() and not strlen() as appropriate. Also refactor the longest cell code to call string_length() a lot less; by simply using an array of max sizes we don't have to recompute values nearly as much. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Use unsigned types for indent width and column countDan McGee3-26/+26
For getcols(), the functions we call return a value of type 'unsigned short', so it makes sense for us to do the same. string_length() is meant to behave like strlen(), so it should return type size_t. This exposes other functions such as indentprint() which should also be using signed return types. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Show download sizes when using -S/--syncDan McGee1-5/+21
We now label the old 'Size' column as 'Net Change' to reflect the reality of what we are looking at. Sync operations now get an additional 'Download Size' column. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Keep track of explicitly added and removed packagesDan McGee7-5/+33
This allows us to sort the output list by showing all pulled dependencies first, followed by the explicitly specified targets. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Combine add and removal package list displayDan McGee4-64/+110
There was no real reason for these to be done separately. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Track unresolvable transaction packagesDan McGee3-9/+18
Rather than free them right away, keep the list on the transaction as we already do with add and remove lists. This is necessary because we may be manipulating pointers the frontend needs to refer to packages, and we are breaking our contract as stated in the alpm_add_pkg() documentation of only freeing packages at the end of a transaction. This fixes an issue found when refactoring the package list display code. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Move pacsave path construction code off the stackDan McGee1-2/+6
This is definitely not in the normal hot path, so we can afford to do some temporary heap allocation here. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Use the full buffer when computing md5/sha256 sumsDan McGee1-4/+6
No wonder these were slower than expected. We were only reading 4 (32-bit) or 8 (64-bit) bytes at a time and feeding it to the hash functions. Define a buffer size constant and use it correctly so we feed 8K at a time into the hashing algorithm. This cut one larger `-Sw --noconfirm` operation, with nothing to actually download so only timing integrity, from 3.3s to 1.7s. This has been broken since the original commit eba521913d6 introducing OpenSSL usage for crypto hash functions. Boy do I feel stupid. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Fix memory leak in download payload->remote_nameDan McGee3-12/+18
In the sync code, we explicitly allocated a string for this field, while in the dload code itself it was filled in with a pointer to another string. This led to a memory leak in the sync download case. Make remote_name non-const and always explicitly allocate it. This patch ensures this as well as uses malloc + snprintf (rather than calloc) in several codepaths, and eliminates the only use of PATH_MAX in the download code. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Revert "libalpm: compare pkgname with strcoll"Dan McGee1-1/+1
This commit was made with the intent of displaying "correctly" sorted package lists to users. Here are some reasons I think this is incorrect: * It is done in the wrong place. If a frontend application wants to show a different order of packages dependent on locale, it should do that on its own. * Even if one wants a locale-specific order, almost all package names are all ASCII and language agnostic, so this different comparison makes little sense and may serve only to confuse people. * _alpm_pkg_cmp was unlike any other comparator function. None of the rest had any dependency on anything but the content of the structs being compared (e.g., they only used strcmp() or other basic comparison operators). This reverts commit 3e4d2c3aa65416487939148828afb385de2ee146. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28_alpm_splitdep: use malloc instead of callocDan McGee1-3/+5
There was only one simple to handle case where we left a field uninitialized; set it to NULL and use malloc() instead. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28be_sync: fetch only entry mode, not full stat structDan McGee1-5/+2
This saves a lot of unnecessary work since we don't need any of the other fields in the stat struct. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28alpm_list: use malloc instead of callocDan McGee2-8/+8
In every case we were calling calloc, the struct we allocated (or the memory to be used) is fully specified later in the method. For alpm_list_t allocations, we always set all of data, next, and prev. For list copying and transforming to an array, we always copy the entire data element, so no need to zero it first. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-27makepkg: ensure '-' is last in a character globDave Reisner1-1/+2
If '-' isn't the last item, it's interpreted as a range and not literally, causing problematic behavior in parsing optdepends. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-27pacman-key: use consistent punctuation in error messagesDan McGee1-5/+5
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-27Fix compilation using --without-gpgmeDan McGee1-3/+10
I'm really good at breaking this on a regular basis. If only we had some sort of automated testing for this... Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-27Remove unnecessary loggerDan McGee1-1/+0
This is just a wrapper function; the real function we call logs an almost identical line. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-27Delay check for repository servers until we need themDan McGee1-8/+8
In the sync download code, we added an early check in 6731d0a9407e for sync download server existence so we wouldn't show the same error over and over for each file to be downloaded. Move this check into the download block so we only run it if there are actually files that need to be downloaded for this repository. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-27Avoid comparison between signed and unsigned typesAllan McRae1-1/+2
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-27Ensure fileconflict value is actually a stringDan McGee1-16/+14
When we switched to a file object and not just a simple string, we missed an update along the way here in target-target conflicts. This patch looks large, but it really comes down to one errant (char *) cast before that has been reworked to explicitly point to the alpm_file_t object. The rest is simply code cleanup. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-26bash_completion: add completion for pacman-keyDave Reisner1-0/+16
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-26pacman-key: allow get_from to return a default valueDave Reisner1-2/+4
Keep the non-zero return val to let the caller know that the key wasn't found. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-26pacman-key: simplify writing to config fileDave Reisner1-5/+3
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-26makepkg: normalize whitespace for optdepends in .PKGINFOAllan McRae1-1/+1
Many PKGBUILDs use formatting whitespace when specifying optdepends. This is removed when adding a package to a repo-database so the output of "pacman -Si <package>" and "pacman -Qip <package file>" becomes inconsistent. Instead, do the adjustment when creating the .PKGINFO file. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-26makepkg: allow versioned optdepends with epochAllan McRae1-2/+2
Allow the specification of versioned optdepends with an epoch. This also (partially) enforces a whitespace between ":" and the description which is required for the future optdepends parsing code. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-26Revamp pacman signal handlerDan McGee1-23/+23
* All errors now go to stderr, so do the same here and simplify the writing of the error message. * Add SIGHUP to the handled signal list, and don't repeat code. * Attempt to release the transaction (e.g. remove the lock file) for all of HUP, INT, and TERM. Signals HUP and INT respects transaction state, TERM will immediately terminate the process. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Update Doxyfile and fix some documentation errors caught by DoxygenDan McGee7-57/+109
A few parameters were outdated or wrongly named, and a few things were explicitly linked that Doxygen wasn't able to resolve. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Ensure database validity flags are set in invalid signature caseDan McGee1-0/+3
We returned the right error code but never set the flags accordingly. Also, now that we can bail early, ensure we set the error code. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Handle key import errors correctly and with good error messagesDan McGee1-6/+36
This adds calls to gpgme_op_import_result() which we were not looking at before to ensure the key was actually imported. Additionally, we do some preemptive checks to ensure the keyring is even writable if we are going to prompt the user to add things to it. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22signing: be consistent with returning -1 for error casesDan McGee1-12/+17
This also fixes a segfault found by dave when key_search is unsuccessful; the key_search return code documentation has also been updated to reflect reality. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Update configure.ac version to rc2Dan McGee1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Regenerate message catalogs and translationsv4.0.0rc2Dan McGee84-2177/+4616
We've had a bit of churn since the last time this was done. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Translation file updates from TransifexDan McGee81-1391/+1639
Pick up any updates before I push new source messages out to the service. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22pacman-key: add an additional plain text 'foo-trusted' fileDan McGee2-11/+47
This is similar to the 'foo-revoked' file we had. This will be used to inform the user what keys in the shipped keyring need to be explicitly trusted by the user. A distro such as Arch will likely have 3-4 master keys listed in this trusted file, but an additional 25 developer keys present in the keyring that the user shouldn't have to directly sign. We use this list to prompt the user to sign the keys locally. If the key is already signed locally gpg will print a bit of junk but will continue without pestering the user. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22pacman-key: factor out validate_with_gpg() methodDan McGee1-16/+14
This was copy-pasted code for the most part once the filename was factored out. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22pacman-key: remove holdkeys functionalityDan McGee2-15/+1
We're putting the cart ahead of the horse a bit here. Given that our keyring is not one where everything is implicitly trusted (ala gpgv), keeping or deleting a key has no bearing on its trusted status, only whether we can actually verify things signed by said key. If we need to address this down the road, we can find a solution that works for the problem at hand rather than trying to solve it now before signing is even widespread. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22pacman-key: implement promptless lsigningDan McGee1-2/+3
Signed-off-by: Dan McGee <dan@archlinux.org>
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-11-05 09:27:29 +0100