summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2008-11-30Give an error message on alpm_db_register_sync() errorNagy Gabor1-12/+34
This patch slightly modifies pacman.c/_parseconfig(): See FS#12148. Now pacman prints the following error message in that case: "error: could not register 'unstable' database (could not open database)" I also added an error message for alpm_db_setserver() error. I changed the "return(1);" scheme to "ret = 1; goto cleanup;" to make sure that we free allocated memory and close open files. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-11-30Simplify mercurial revision commandDan McGee1-1/+1
Not only does this require less sed-magic, it also fixes FS#12286 where fetching the revision number fails if mercurial is in compact mode. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-11-18Minor code cleanupsDan McGee3-10/+9
Mostly noticed when compiling libalpm/pacman with ICC. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-11-01makepkg: fix bash substitution to work under older versionsDan McGee1-2/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-29Give pacman-optimize a refresherDan McGee1-21/+34
This patch addresses quite a few lingering issues in the pacman-optimize script. FS#11767 provoked this look-over and the following issues were noticed and fixed: * If an alternate dbroot was specified, then the lockfile location was never updated to reflect it. The lockfile location is now set after all dbpath initialization. * The inclusion of a trailing slash on dbroot was problematic and led to the following command being executed: bsdtar -xpf /tmp/pacman-optimize.p12Q4vAUWY/pacman-db.tar.gz \ -C /var/lib/pacman/.new/ It is doubtful we meant to create a hidden directory like this below our database root, only to go and delete it a second later and then re-extract. Fix the whole thing by ensuring our dbpath has its trailing slash stripped and then appending it when necessary. * The DB extraction was performed twice for no real apparent reason. This opens the door for extraction problems the second time around, leaving you with no original database to fall back to. Change the behavior so we only extract once, and then perform a directory shuffle once we verify the checksums are correct. * Perform an explicit sync after we drop the new database on the disk. It should work better this way. * Tighten up our check for a pacman lockfile and the time we create one. There is still a possible race condition but the window is shorter. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-29Update Chinese translationLyman Li2-227/+225
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-29makepkg: fix updating PKGBUILD when building SCM packagesAllan McRae1-1/+3
Fixes a bug and resets pkgrel to 1 when bumping pkgver Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-19repo-add: Use openssl instead of md5sumDan McGee1-2/+2
This is similar to the change we made in makepkg so it is cross-platform compatible and doesn't require coreutils. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-19Correctly close the pipe used for scriptlet executionDan McGee1-3/+3
We never had a call to pclose() in here before, leaving our file descriptor in some sort of limbo state. In addition, clean up some of the other logic such as directly calling exit(1) on a popen() failure rather than going to our cleanup block, and handling and respecting the exit status of the subprocess correctly. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-13Minor updates to Russian translationSergey Tereschenko2-19/+19
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-13Make interrupt handler async-safeDan McGee1-8/+22
Calling printf() in a signal handler can be dangerous, so avoid it by writing directly which is guaranteed to be safe according to signal(7). Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-13Remove unnecessary unistd.h header inclusionDan McGee4-4/+0
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-13Attempt to idiot-proof making and refreshing docsDan McGee3-33/+15
I mess this up more often than not, and maybe this will do the trick. Remove the --enable-asciidoc option as it has been superseded by the --disable-doc option in usefulness. If you want to skip building docs, you skip building all docs which is much easier when it comes to ensuring the make 'dist' and 'distcheck' targets will always build the manpages and always build the most up to date manpages. Developers shouldn't be affected in their normal builds, nor should end users of the source tarball. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-13Rework fakechroot checkingDan McGee3-3/+9
Do the checks in the tests that need it, and get rid of some of the cluttered output when it is not available (one line per test run). Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-13Reduce number of calls to getcols()Dan McGee2-8/+9
Every call to getcols() results in two ioctl() calls, which we really didn't need as changing the number of columns in mid-print would be pretty crazy. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-13libalpm: handle syscall interruption correctlyDan McGee2-4/+4
It is possible to throw EINTR from a system call such as open(), close(), or waitpid() if custom signal handlers are set up and they are not initialized with the SA_RESTART flag. This was noticed by Andreas Radke when ^C (SIGINT) was given during the call to waitpid(), causing it to throw the EINTR error and we could not accommodate it. Simply wrap these calls in a simple loop that allows us to retry the call if interrupted. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-13Ensure we don't have double slashes when creating frontend pathsDan McGee1-2/+4
Because libalpm always returns a root path with a trailing slash, when we use it to create our unspecified paths we get double slashes in the result. Use the fix suggested by Jürgen Hötzel to remedy this. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-09-02Another attempt at fixing totaldownload.Xavier Chantry1-8/+16
This fixes FS#11339, which is a regression of commit 89c2c5196: When totaldownload is enabled, the database downloading percent (-Sy) is always at 0. That is because we have no guarantee that the totaldownload callback was called by libalpm. In particular, it is not called (and it would not make sense to) when a single file is downloaded, like it is the case with databases. So the correct way to detect if totaldownload should be used is checking both config->totaldownload and list_total, like it was already done in several places in the cb_dl_progress function. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-28Separate targets on -Qi/-Si with a newline.Xavier Chantry1-1/+3
This fixes FS#11331 The newline was lost with commit 9451b2e4f23a3c566fcfe3420c379b3cb3eb1f90. Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2008-08-27New Ukrainian translationv3.2.1Roman Kyrylych6-1/+2204
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-26Updates in preparation for 3.2.1 releaseDan McGee2-5/+20
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-26makepkg : allow to specify a download filenameXavier Chantry3-26/+56
A source entry can now have the following form, to specify a different filename : "filename::http://path/to/file" Of course, the old syntax is still supported : "http://path/to/file" And as before, in the second case, the filename used is simply "file". This fixes FS#11292, because handling multiple source files with the same name is now possible (just choose a different filename). But it will also allow to deal much more nicely with funny url like this by using a sane filename (and unfortunately, there are quite a few) : http://www.vim.org/scripts/download_script.php?src_id=6992 Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-26Final updates on all translation for 3.2.1Xavier Chantry22-98/+16
* Update all .po files because of the last "-q,--quiet" fix. Also for some strange reason, en_GB was missing a few c-format tags. * Finally, delete all unused translations. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-26Add missing comma to -S --help messageRoman Kyrylych1-1/+1
Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-25Update Portuguese (Brazil) translationHugo Doria3-41/+37
Xav : alignment fixes
2008-08-25Update Turkish translationSamed Beyribey2-19/+16
2008-08-25Update Chinese Simplified translation甘露(Lu.Gan)2-18/+16
2008-08-24Update Czech translationVojtěch Gondžala2-22/+16
2008-08-24Update German translationMatthias Gorissen2-17/+19
2008-08-24Update Russian translationSergey Tereschenko2-23/+18
[Xav: one minor fix to libalpm po file]
2008-08-23Update British English translationXavier Chantry1-3/+3
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2008-08-23Update French translationXavier Chantry2-20/+17
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2008-08-23Update Hungarian translationNagy Gabor2-16/+12
2008-08-23Update Spanish translationJuan Pablo González Tognarelli3-47/+43
Xav : one minor fix (a missing %s in the downgrading message).
2008-08-23Update Polish translationMateusz Herych2-17/+12
2008-08-23Update Italian translationGiovanni Scafora2-25/+22
2008-08-23Update translation files for pending 3.2.1 releaseDan McGee26-288/+581
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23Fix 'None' text so we don't have to translate it twiceDan McGee1-2/+2
We had one "None" and one "None\n" string; we can let the program do the addition of the newline so we don't have to. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23Cleanup of _alpm_pkg_compare_versions.Xavier Chantry5-30/+43
* Change the return values to be more informative. It was previously boolean, only indicating if a sync package was newer than a local package. Now it is a simple wrapper to vercmp, handling the force flag. * Remove the verbose output from _alpm_pkg_compare_versions. The "force" message is not so useful. The "package : local (v1) is newer than repo (v2)" message can be moved to -Su operation. For the -S operation, it is better to have something like : "downgrading package from v1 to v2" * Don't display the "up to date -- skipping" and "up to date -- reinstalling" messages, when the local version is newer than the sync one. * Fix the behavior of --needed option to not skip a target when the local version is newer, and clarify its description. * Add a new alpm_pkg_has_force function This allows us to access the pkg->force field like any other package fields. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23download : disable progressbar when total is unknown.Xavier Chantry1-1/+4
This is a work around for FS#8725. There are some bad combination of proxies and mirrors where the Content Length is not returned, and thus the progress bar can't be displayed correctly. Dan: Note that this patch also adds a "downloading" message when the progress bar is disabled, which was formerly not indicated at all in the output. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23fix HACKING asciidoc file.Xavier Chantry1-18/+18
The HACKING file seemed to be broken : http://archlinux.org/pacman/HACKING.html And indeed, running asciidoc HACKING issued a number of warnings : WARNING: HACKING: line 27: missing [paradef-default] C-style entry type: numbered : expected 1 got 3 WARNING: HACKING: line 44: list item 3 out of sequence WARNING: HACKING: line 49: missing [paradef-default] C-style entry type: numbered : expected 2 got 4 WARNING: HACKING: line 62: list item 4 out of sequence type: numbered : expected 3 got 5 WARNING: HACKING: line 69: list item 5 out of sequence type: numbered : expected 4 got 6 WARNING: HACKING: line 75: list item 6 out of sequence type: numbered : expected 5 got 7 WARNING: HACKING: line 83: list item 7 out of sequence WARNING: HACKING: line 104: missing [paradef-default] C-style entry WARNING: HACKING: line 116: missing [paradef-default] C-style entry WARNING: HACKING: line 126: missing [paradef-default] C-style entry I just followed the syntax example there : http://www.methods.co.nz/asciidoc/userguide.html#X56 And all is fine now :) Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23pacman : clarify help message.Xavier Chantry1-2/+3
Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23makepkg : localize the Y/n part of the question.Xavier Chantry1-3/+4
pacman already localizes the yesno stuff, so doing the same in makepkg is more consistent. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23pacman: print optdepends on install and upgrade.Xavier Chantry3-0/+12
This implements FS#10630. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23Add new list_display_linebreak functionNagy Gabor3-23/+38
list_display puts several members on the same line, which is not appropriate for optdepends: Optdepends: foo: feature1 bar: feature2 baz: feature3 The new list_display_linebreak function puts every member on its own line, which is much better with optdepends: Optdepends: foo: feature1 bar: feature2 baz: feature3 Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> [Xav: implement this new behavior as a new function rather than as a parameter of list_display] Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23Move the the description parsing logic to string_display()Nagy Gabor2-19/+30
So dump_pkg_full will indent all strings correctly. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> [Xav: add string_length function] Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23makepkg: do insensitive comparisons of checksums.Xavier Chantry1-1/+3
This fixes FS#11283 , which was originally reported on the forums : http://bbs.archlinux.org/viewtopic.php?id=53794 Insensitive comparisons were implicitly made before since md5sum --status was used for checking. Now that we use openssl and compare checksums manually in bash, we lost that feature. This can be easily reintroduced using tr '[A-F]' '[a-f]' What convinced me to fix it is that the md5 command line tool generates md5sums in upper case by default : http://www.fourmilab.ch/md5/ And finally, A-F and a-f are the same in hex and both are used. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-20Factor shell script size command into configure scriptDan McGee3-2/+10
Commit 149839c5391e9a93 introduced a small behavior regression as a drawback for a better portability. repo-add now includes the approximate size (to the nearest KB) rather than an exact size due to the switching of the du command to a more portable form. Instead of sacrificing the exact size, use configure to help us determine a valid command to acquire our filesize and place it in the sync database. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-20repo-add: add optdepends to the sync database.Xavier Chantry1-1/+3
See FS#10630. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-20repo-add: Fix whitespaces handling in variables.Nagy Gabor1-9/+8
repo-add didn't handle whitespaces nicely in fields value, and this has hurt us several times, first with provision version (FS#9171) and then with optdepends (FS#10630), so it is time to fix it. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-11-01 16:27:57 +0100