summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-03-19build: remove references to variable replacements from pacman-optimizeEli Schwartz4-24/+0
MODECMD and OWNERCMD are not used by pacman itself, so we don't need to check for and replace them now that pacman-optimize is removed. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-03-19Make makepkg compute sizes properlySantiago Torres1-2/+1
Makepkg used to use du --apparent-size to compute the size of the package. Unfortunately, this would result in different sizes depending on the filesystem used (e.g., btrfs vs ext4), which would affect reproducible builds. Use a wc-based approach to compute sizes Signed-off-by: Santiago Torres <santiago@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-03-19Reformatting log timestamp to include time-zoneFlorian Wehner1-3/+5
The time logged is currently given as localtime without any timezone information. This is confusing in various scenarios. Examples: * If one is travelling across time-zones and the timestamps in the log appear out of order. * Comparing dates with `datediff` gives an offset by the time-zone This patch would reformat the time-stamp to a full ISO-8601 version. It includes the 'T' separating date and time including seconds. Old: [2019-03-04 16:15] New: [2019-03-04T16:15:45-05:00] Signed-off-by: Florian Wehner <florian@whnr.de> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-03-07Remove support for deltas from libalpmAllan McRae15-723/+10
Signed-off-by: Allan McRae <allan@archlinux.org>
2019-03-07Make pacman forget deltas existAllan McRae7-71/+9
Dummy callbacks are still present to prevent compiler warnings until libalpm is delta free. Also remove Delta parsing from pacman.conf. Signed-off-by: Allan McRae <allan@archlinux.org>
2019-03-07Remove cleanupdeltaAllan McRae6-151/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2019-03-07Remove pkgdeltaAllan McRae9-297/+0
Signed-off-by: Allan McRae <allan@archlinux.org>
2019-03-07Remove delta support from repo-addAllan McRae2-175/+15
Signed-off-by: Allan McRae <allan@archlinux.org>
2019-03-07doc: add man page for pacman-conflast-deltapkgs-commitJelle van der Waa3-1/+70
Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-03-07doc: set rootdir correctly in man pagesJelle van der Waa3-2/+4
If an alternative rootdir is specified in either meson or configure it's not respected in the generated man pages. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-03-07makepkg: add new checksum algorithm via coreutils b2sumEli Schwartz5-5/+5
coreutils 8.26 in December 2016 added this new hashing method which is compatible with the existing md5sum and sha*sum tool usage, while using the blake2 hash algorithm. makepkg uses coreutils to provide source file integrity checks via ${integ}sum binaries and it makes sense to offer this as an additional option. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-03-07pacman: fix segfault when Usage is specified without a valuemorganamilo1-18/+20
And extract all the common code to a macro. Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-03-01Sanitize file name received from Content-Disposition headerAndrew Gregory1-1/+2
When installing a remote package with "pacman -U <url>", pacman renames the downloaded package file to match the name given in the Content-Disposition header. However, pacman does not sanitize this name, which may contain slashes, before calling rename(). A malicious server (or a network MitM if downloading over HTTP) can send a content-disposition header to make pacman place the file anywhere in the filesystem, potentially leading to arbitrary root code execution. Notably, this bypasses pacman's package signature checking. For example, a malicious package-hosting server (or a network man-in-the-middle, if downloading over HTTP) could serve the following header: Content-Disposition: filename=../../../../../../usr/share/libalpm/hooks/evil.hook and pacman would move the downloaded file to /usr/share/libalpm/hooks/evil.hook. This invocation of "pacman -U" would later fail, unable to find the downloaded package in the cache directory, but the hook file would remain in place. The commands in the malicious hook would then be run (as root) the next time any package is installed. Discovered-by: Adam Suhl <asuhl@mit.edu> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-02-21Use standard, consistent units in the download progress.Sever Oraz1-10/+10
Rather than use M/s which can be either MB or MiB, specify that it uses MiB (consistent with the displayed total size). Fixes FS#59201 Signed-off-by: Sever Oraz <severoraz@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-02-21meson: fix static/shared split againEli Schwartz1-2/+2
shared_library does not generate a sane pkg-config file because it assumes we don't want dependencies. Additionally, since we key off of buildstatic, when *not* using buildstatic but attempting to build libalpm on its own as static using -Ddefault_library=static, we are building and linking to a shared libalpm anyway. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-02-21libmakepkg: migrate to schema.sh for integsumsEli Schwartz1-1/+2
We cannot use most of the arrays defined in schema.sh as srcinfo is dependent on the order, but migrate the hashes for now. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-02-21makepkg: simplify run_pacman logicEli Schwartz1-5/+3
We don't need to check the options twice, since it is the same check both times. Instead, merge the conditionals. As far as I can tell, the only reason the checks for: - PACMAN_OPTS and - whether to use sudo were ever separated is due to the historic existence of --asroot, since the second check included a check for (( ! ASROOT )) until it was cleaned up in commit 61ba5c961e4a3536c4bbf41edb348987a9993fdb. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-02-21makepkg: implement locking for pacman commandsEli Schwartz1-0/+9
When pacman is run as root to do -S, -U, or -R, it would immediately abort if pacman is not ready for use. Instead, poll the lockfile and wait until it becomes available. Implements FS#28840 Original-patch-by: Georges Dubus <georges.dubus@compiletoi.net> Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-02-12build: link vercmp with a static copy of libalpmEli Schwartz1-3/+12
This has historically been the case in autotools since we want vercmp to not break mid-transaction in an install script. For convenience, we create libalpm.a and use this to optionally generate libalpm.so (when not configured with -Dbuildstatic=true) as well as to link any binary which explicitly wishes to be built statically "with libalpm", but does not care where a function is defined. meson then treats this correctly: it builds the object file only once for both libraries, and the compiler strips out unused functionality from the final static binary. Currently the only binary which requires this is vercmp. Fixes FS#61719 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-02-12Add implicit fall through warningAllan McRae3-1/+3
Requires modification to our comment about fall through to match compilers expectations. Works for GCC and Clang. Signed-off-by: Allan McRae <allan@archlinux.org>
2019-02-07libalpm: prevent 301 redirect loop from hanging the processMark Ulrich1-0/+1
If a mirror responds with a 301 redirect to itself, it will create an infinite redirect loop. This will cause pacman to hang, unresponsive to even a SIGINT. The result is pacman being unable to sync or download any package from a particular repo if its current mirror is stuck in a redirect loop. Setting libcurl's MAXREDIRS option effectively prevents a redirect loop from hanging the process. Signed-off-by: Mark Ulrich <mark.ulrich.86@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-02-07I blame everyone but me for thisAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2019-02-04fix various typosmorganamilo9-15/+15
Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-31libmakepkg: lint disallowed architecture specific variablesmorganamilo3-0/+84
Variables such as 'pkgdesc_x86_64' are invalid, instead of ignoring them raise an error. This also disallows using 'any' as an architecture specific variable Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-31libmakepkg: lint disallowed variables in package()morganamilo4-0/+73
makepkg will now error if disallowed variables are set inside of the package function. Disallowed variables are variables that do exist, like 'makedepends' and 'pkgver' but can not be set inside of a package function. Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-31libmakepkg: centralise random arrays of pkgbuild variablesmorganamilo8-22/+64
Refactor many of the different arrays of pkgbuild variables into scripts/libmakepkg/util/schema.sh.in. Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-30makepkg: use --unneeded for pacman call in remove_deps()Allan McRae1-1/+1
This patch was inspired by FS#32723 which asks makepkg to install makedepends before depends. The use case is to build a package depending on a virtual package that is only provided by other packages (e.g. java-runtime in Arch Linux), but wanting to build against a specific version. Installing makedepends first (but not at the same time as depends) would allow specifying the version to build against, instead of pacman resolving to the default version when installing depends. It turns out, we can already achieve installing makedepends first by specifying dependencies only in the package function (and making sure makedepends includes everything needed). The only issue is that if we use makepkg to install the built package with the --install flag and along with the --rmdeps flag, we will try to remove any installed dependencies that are specified in the depends array in the package function. To counter this, we need to use the --unneeded flag for the pacman call. Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-30libmakepkg: Add lzip ext supportChloe Kudryavtsev3-1/+4
lzip is a lossless data compressor designed to replace gzip and bzip2 as the standard general-purpose compressed format. - add .lz (lzip) support to libmakepkg/util/compress.sh:compress_as - add COMPRESSLZ to makepkg.conf.in - document COMPRESSLZ - document PKGEXT with `.tar.lz` Signed-off-by: Chloe Kudryavtsev <toast@toastin.space> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-22libmakepkg: move checkdepends to the correct arraymorganamilo1-5/+4
Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-22libmakepkg: Implement extendable signature verificationEli Schwartz1-3/+4
Lookup the existence of matching functions for each protocol, and fallback on the generic file handler. New verification protocols can then be added via thirdparty libmakepkg drop-ins without requiring modifications to verify_signature.sh Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-22libmakepkg: implement extendable source protocolsEli Schwartz5-37/+30
Lookup the existence of matching functions for each protocol, and fallback on the generic file handler. New source protocols can then be added via thirdparty libmakepkg drop-ins without requiring modifications to source.sh Fixes FS#49076 Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-22libmakepkg: optimize get_protocol to always return proto, not proto+uriEli Schwartz4-17/+19
e.g. git+https:// is commonly used for git repositories cloned over HTTPS, but we assume a proto with a plus in it is actually a protocol followed by some URI handler. So we might as well simplify the return value and not have to always add glob matching everywhere when checking the proto in use. This is required in order to use the proto directly in function calls, which will be used in a followup patch. Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-21libmakepkg: make gettext replacements more templatedEli Schwartz1-1/+1
Making the undescore be translated is probably not something we need translators to think about. Additionally, a number of places which use the same text differ only by the variable being referenced, so simplifying the string means we can drop a redundant translation. Bonus: we save a few bytes here and there. \o/ Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-21libalpm: fix minor typo in _alpm_db_usage_morganamilo1-1/+1
Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-21Fix typo in pacman man pageAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-16libmakepkg: disallow using 'any' with other archesmorganamilo1-2/+7
Error if the arch array contains any and any other values. This also fixes a bug where the check for `$arch == 'any'` which only evaluated the first value in the array, meaning the rest of the values would not be linted. Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-16meson: fix website targetEli Schwartz1-4/+13
A number of pages don't actually exist as html inside the source tree, and need to be generated even though they are manpages. This caused the website.tar.gz target to only work inside a dirty tree initially created by autotools. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-14update a bunch of links for https and to adapt to changing domainsEli Schwartz3-17/+15
projects.archlinux.org and mailman.archlinux.org are both migrated to new domains. Transifex supports https, so encourage its use by default. Take advantage of the opportunity when updating these links, to also delist some projects that are dead. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-14doc: add a couple missing manpages from the html indexEli Schwartz1-0/+2
The index embeds the names of all doc subpages, and these were never updated. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-14doc: keep manpages and html pages in syncEli Schwartz1-13/+1
We forgot to add BUILDINFO to the list of html docs. Instead of always updating things in two places, just derive the one from the other. meson did not have this problem as it already derives both lists from one template. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-14meson: fix regression that broke building libmakepkgEli Schwartz1-1/+1
In commit f7efa6a93d5361af610827d41045d87c7a72f2b5 we added a new file, and also wired it up to the build systems, but it got added under the wrong name in meson.build Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-10makepkg: return E_PKGBUILD_ERROR for nonexistent PKGBUILDEli Schwartz1-1/+1
This is not really an error with a "user function". Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-10libmakepkg: simplify splitting command output into arrayEli Schwartz1-1/+1
Use mapfile instead of hacking around read -a with the $IFS. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-10libmakepkg: add routine for linting $SOURCE_DATE_EPOCHEli Schwartz3-0/+39
This can only ever be an int, and the specification states that a malformed timestamp should be considered a fatal error. https://reproducible-builds.org/specs/source-date-epoch/ Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-10makepkg: fix unguarded use of printfEli Schwartz1-1/+1
paths can contain printf-unsafe chars, and printf -v is not somehow immune to this Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-10makepkg: check_pkgrel: Don't say "decimal" in the error messageLuke Shumaker1-1/+1
If you have a malformed pkgrel, the error message says that it must be a "decimal". That isn't quite true, as that would mean that `1.1 == 1.10`. Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-10makepkg: Better error messages for versions in (check, make, ↵Luke Shumaker11-43/+106
opt)depends/provides/conflicts Given the depends depends=('foo>=1.2-1.par2') and the error message ==> ERROR: pkgver in depends is not allowed to contain colons, forward slashes, hyphens or whitespace. One would be lead to believe that the problem is that they gave a pkgrel in depends at all, not that the pkgrel contains letters. Each of the (check,make,opt)depends, conflicts, and provides linters use a glob to trim off properly formed epoch an rel from the full version string, and pass the remainder to check_pkgver(). This does a good job of accepting/rejecting full versions, but doesn't do a good job of generating good error messages when rejecting if it's because of the epoch or rel. 1. Factor out check_epoch() and check_pkgrel() from lint_epoch() and lint_pkgrel(), similarly to check_pkgver(). 2. Add a check_fullpkgver() that takes a full [epoch:]ver[-rel] string and splits it in to epoch/ver/rel, and calls the appropriate check_ function on each. 3. Use check_fullpkgver() in the {,check,make,opt}depends, conflicts, and provides linters. Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-10libmakepkg/lint_pkgbuild: check for invalid variables even if they're emptyEli Schwartz1-10/+6
Checking the length of the variable to be non-zero before considering it an error is inconsistent; license=() and depends='' and `declare arch` should be considered just as wrong. In fact the current check detects depends='' as non-zero and returns an error, but happily considers the others to be perfectly okay. A more reliable check is to simply see if the name has been declared (whether it is set or not), and then enforce that it's been declared to the right type. As an added benefit, avoiding the creation of proxy-evaled variables to count the number of indexes results in simpler code. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-10Add [ignored] to -Qu output for packages in repos that are not Usage = UpgradeAllan McRae1-1/+5
List all available updates in -Qu output, but include [ignored] beside those that will not be updated in a -Su operation due to thier repo Usage value (in addition to those that are Ignored). Fixes FS#59854. The following people provided initial patches to print [ignored] on -Qu operations, which highlighted a larger problem to be fixed first: With-thanks-to: morganamilo <morganamilo@gmail.com> With-thanks-to: Michael Straube <michael.straube@posteo.de> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-10libalpm/sync.c: change alpm_sync_newversion() to alpm_sync_get_new_version()Allan McRae3-8/+4
The behaviour of "pacman -Qu" was very strange... It would only consider packages from repos with Usage = Search (or All), and ignore those with Usage = Sync, Install or Upgrade. This is because the function alpm_sync_newversion() used ALPM_DB_USAGE_SEARCH for its filtering. Given this function is documented (at least in the source) to "Check for new version of pkg in sync repos", I would expect that to look at all repos. However, just changing this parameter, would result in a fairly silent change in behaviour of this function. Instead, rename the function and remove this filtering altogether. Users of this function can filter the dbs passed to this function to achieve their desired output. Signed-off-by: Allan McRae <allan@archlinux.org>
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-12-19 11:41:26 +0100