summaryrefslogtreecommitdiffstats
path: root/configure.ac
AgeCommit message (Collapse)AuthorFilesLines
2009-09-24repo-add: make sure we get size of target fileDan McGee1-3/+3
If the package we were adding was a symlink, we stuck the symlink size in the database rather than the size of the file it referred to. Whoops! Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-17Updates in prep for 3.3.1 releaseDan McGee1-2/+2
Bump versions in configure.ac; update NEWS accordingly Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-06Configure: Check if libfetch version is >= 2.21Henning Garus1-0/+5
Commit 6f97842 started using libfetch's conditional GET. This requires libfetch to be version 2.21 or greater. Change configure.ac to check for the existence of the last_modified field in the url struct, which was introduced with libfetch 2.21. Signed-off-by: Henning Garus <henning.garus@gmail.com> [Xav : moved AC_CHECK_MEMBER outside of AC_CHECK_LIB] Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-08-19re-add -g CFLAGS with --enable-debugXavier Chantry1-1/+1
after commit 8feccaed7861010caefa4f7b9824a6, -g was no longer added with --enable-debug. So if CFLAGS was set (if unset, it defaults to -g -O2) and didn't contain -g, we ended with no debug symbols.. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-08-01Version bump for 3.3.0Dan McGee1-4/+4
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-05-12makepkg: several small fixesAllan McRae1-1/+1
1) Do not attempt to strip compressed binaries Original-work-by: Marc - A. Dahlhaus <mad@wol.de> 2) Add "\" in "GPL\'ed" so quote mark does not break source code highlighting 3) Add local to docdir paths in makepkg.conf for consistency 4) Use full path to sed in MacOSX in case users have GNU sed earlier in path Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-26makepkg: make in-place sed portableAllan McRae1-0/+5
Do a sed replacement in-place is not very portable. On Mac OSX and BSDs, the syntax is "sed -i ''" where as with GNU sed the command is "sed -i''" or just "sed -i". This patch detects which command should be used during configure. Credit to Kevin Barry who researched this issue and provided a patch to work around this using temporary backup files. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-02-28Update checks for python in configureDan McGee1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-02-16configure.ac: use full path of stat for Mac OS XKevin Barry1-1/+1
Change configure.ac to use the full path of stat when on darwin/mac. This is needed for situations when a user installs the GNU/coreutils and places it in their path before /usr/bin, but the SIZECMD is already configured for Darwin's version of stat. Signed-off-by: Kevin Barry <barryk gmail com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-13Remove libdownload support and fix libfetch one.Xavier Chantry1-9/+6
Aaron said to consider libdownload a dead project so libdownload support was removed to more easily fix libfetch one (otherwise many ifdef needed). There was no direct replacement for ferror to detect an error while downloading. So instead, I added a check at the end to see if the file was fully downloaded, which is just a small chunk of code taken from here: http://cvsweb.netbsd.org/bsdweb.cgi/pkgsrc/net/libfetch/files/fetch.c?only_with_tag=MAIN Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-07Merge branch 'maint'Dan McGee1-2/+2
2009-01-04Update configure.ac for 3.2.2 releaseDan McGee1-2/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-03makepkg: move BUILDSCRIPT from makepkg.confAllan McRae1-0/+9
Commit 4b183bf9 moved makepkg.conf sourcing to after the parsing of options, breaking the -p option and --help output. The solution is to move BUILDSCRIPT out of makepkg.conf. This patch moves the definition BUILDSCRIPT back to makepkg itself and adds configure option to allow easy changing of this value during build time. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-13Merge branch 'maint'Dan McGee1-23/+0
2008-10-13Attempt to idiot-proof making and refreshing docsDan McGee1-23/+0
I mess this up more often than not, and maybe this will do the trick. Remove the --enable-asciidoc option as it has been superseded by the --disable-doc option in usefulness. If you want to skip building docs, you skip building all docs which is much easier when it comes to ensuring the make 'dist' and 'distcheck' targets will always build the manpages and always build the most up to date manpages. Developers shouldn't be affected in their normal builds, nor should end users of the source tarball. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-27Merge branch 'maint'Dan McGee1-3/+3
2008-08-26Updates in preparation for 3.2.1 releaseDan McGee1-3/+3
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-24Add autotools magic for pactestsHenning Garus1-0/+1
Added a Makefile.am for the pactest/tests dir. This is a blatant ripoff of scripts/Makefile.am, which replaces predefined expressions in NAME.py.in pactests with configure variables. This can be used to write pactests which consider compile time options. Signed-off-by: Henning Garus <henning.garus@gmail.com> [Dan: autotools are tough, make a few adjustments for correctness] Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-20Factor shell script size command into configure scriptDan McGee1-0/+7
Commit 149839c5391e9a93 introduced a small behavior regression as a drawback for a better portability. repo-add now includes the approximate size (to the nearest KB) rather than an exact size due to the switching of the du command to a more portable form. Instead of sacrificing the exact size, use configure to help us determine a valid command to acquire our filesize and place it in the sync database. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-31Version bumps to configure for 3.2.0 releasev3.2.0Dan McGee1-5/+5
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-25Remove unused strverscmp substituteDan McGee1-1/+1
Our internal vercmp function was the only user of this, and it no longer relies on it. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-16Remove pacman.static build from build filesDan McGee1-16/+0
This presents plenty of problems on OSes besides Linux, and even on Linux when the libtool file for libarchive isn't present. The static build isn't all that useful anyway as missing something such as glibc will still leave you unable to run the pacman.static binary. Remove it from the formal build process. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-31Allow GIT version to be used in pacman buildsDan McGee1-15/+32
Add a new configure flag, --enable-git-version, that allows the output of 'git describe' to be used in the version string associated with this package. This could aid in debugging for users that are using a development version of pacman and we should be able to figure out which cut of code they are using. Sample output: $ pacman --version Pacman v3.1.4-190-g4cfa-dirty - libalpm v2.3.1 $ makepkg --version makepkg (pacman) 3.1.4-190-g5861-dirty Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-19Give libalpm native support for both libdownload and libfetchDan McGee1-3/+6
This should remove the need for any additional patching to run on platforms that have libfetch available but not libdownload. It isn't the prettiest, but we have kept our libdownload impact down to just a few files, so it can be easily done. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-16Merge branch 'maint'Dan McGee1-3/+10
2008-04-15More non-Linux build updates, mostly DarwinDan McGee1-3/+10
Darwin's binary format does support symbols with differing visibilities, but it does not support the protected or internal visibilities- only hidden. For Darwin only, we should fall back to this visibility to prevent warnings from the compiler and because it is close enough for our library purposes. See http://gcc.gnu.org/viewcvs/*checkout*/trunk/gcc/config/darwin.c, search for the "darwin_assemble_visibility" function for more details. Also add pacman.static.exe to gitignore. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-08Update configure.ac to current codeDan McGee1-14/+13
Remove a few functions and things that were unnecessary, update the help line calls to the current function name, and make the small change to pacman.c for the signal handler return type that is defined in config.h. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-08Merge branch 'maint'Dan McGee1-2/+2
2008-04-08Add check for swprintf() and a workaround when it is missingDan McGee1-2/+2
We use this function once in our codebase, but fortunately the workaround is relatively easy. swprintf() is not available on Cygwin so the compile failed there, but we can do a series of mbstowcs() calls that produce the same end result as the swprintf() call. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-07Allow disabling of internal (libdownload) codeDan McGee1-3/+20
Add a new --disable-internal-download flag to configure allowing the internal download code to be skipped. This will be helpful on platforms that currently don't support either libdownload or libfetch (such as Cygwin) and for just compiling a lighter weight pacman binary. This was made really easy by our recent refactoring of the download code into separate internal and external functions, as well as some error code cleanup. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-02Merge branch 'maint'Dan McGee1-1/+1
Conflicts: configure.ac contrib/Makefile.am
2008-04-02Update NEWS and configure.ac for 3.1.4 releasev3.1.4Dan McGee1-2/+2
Also fix a broken contrib/ Makefile, found with make distcheck. I also let the little translation linebreak update slip in here as it was small enough not to be a big deal, and this should just prevent it from happening again later anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-09Merge branch 'maint'Dan McGee1-2/+2
Conflicts: configure.ac
2008-03-07Updates before 3.1.3 releasev3.1.3Dan McGee1-3/+3
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-02-26Merge branch 'maint'Dan McGee1-3/+3
Also bump the devel version on the master branch to 3.2.0devel.
2008-02-26Bump pacman version to a devel release and next version numberDan McGee1-2/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-02-24Merge branch 'maint'Dan McGee1-3/+3
Conflicts: src/pacman/callback.c
2008-02-21Updates before 3.1.2 releasev3.1.2Dan McGee1-3/+3
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-02-02Update libtool version (1.5.24 -> 1.5.26)Dan McGee1-1/+0
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-01-19Final changes before 3.1.1 releasev3.1.1Dan McGee1-4/+5
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-01-16Fix some left over of a0ac72b42.Chantry Xavier1-1/+0
Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-01-11Bump version to develDan McGee1-2/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-01-10Update configure.ac version for releasev3.1.0Dan McGee1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-29Ensure that manpages are always distributed and installedDan McGee1-0/+17
Commit 012f7939784358b02726c169543aa99436439335 was a bit misguided in its thinking, and resulted in a package built without asciidoc enabled not installing the manpages to the system on a 'make install' operation. Fix this behavior by making manpages required in a normal build, and in order to disable their existence, the '--disable-doc' option must be used. Hopefully this solves manpage issues for both developers and package builders while allowing as much flexibility as possible. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-21Remove abs from the pacman repositoryDan McGee1-18/+1
abs has always been an Arch Linux specific tool, and although it is used primarily by pacman and makepkg, it should not be included with a distro- agnostic tarball. In addition, maintenance of the script would be better outside of pacman and would allow for more frequent updates. This also facilitates our move away from a cvsup/csup dependent tool for syncing PKGBUILDs. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-13configure: Doxygen is disabled by default; manpages are included in distDan McGee1-2/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-13Return libalpm version number to being dot-separatedDan McGee1-1/+1
I think I goofed this up when making the big overhaul of configure.ac. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-04Make building of pacman.static optionalDan McGee1-0/+16
Because building of pacman.static fails on some platforms, we should make it optional. It is enabled by default but can be disabled with the use of the --disable-pacman-static flag. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-04Add some more autoconf macros to filter our CFLAGS usageDan McGee1-0/+5
Hopefully these new autoconf macros, with a little magic, will allow us to compile with any compiler and still choose the options we have available to us. Tested locally with gcc 4.2.2 and gcc 3.4.6; the latter doesn't support two of the items we previously had hardcoded in our CFLAGS. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-04Use an autoconf macro to see if -fstack-protector is availableDan McGee1-2/+4
Signed-off-by: Dan McGee <dan@archlinux.org>
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-11-05 14:05:37 +0100