summaryrefslogtreecommitdiffstats
path: root/configure.ac
AgeCommit message (Collapse)AuthorFilesLines
2020-01-07autotools: emit error message when autoconf-archive is missingEli Schwartz1-0/+1
Forbid the AX_COMPARE_VERSION macro from being found in the output configure script. If autoconf-archive is not installed when autoreconf is run, the following error message is emitted: configure.ac:231: error: possibly undefined macro: AX_COMPARE_VERSION If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. autoreconf: /usr/bin/autoconf failed with exit status: 1 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-11-06makepkg: replaces sed in-place with built in substitutionEthan Sommer1-11/+0
Reads PKGBUILD into an array and replaces the pkgver and pkgrel with bash parameter substitution, then uses shell redirection to write to to the file. Because shell redirection follows symlinks, this accomplishes the same thing as the previous default of using the GNU-specific --follow-symlinks sed flag. Removes SEDPATH and SEDINPLACEFLAGS from the build systems as they are not used elsewhere. Signed-off-by: Ethan Sommer <e5ten.arch@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-11-01Release 5.2.1v5.2.1Allan McRae1-2/+2
Signed-off-by: Allan McRae <allan@archlinux.org>
2019-10-21Release v5.2.0v5.2.0Allan McRae1-4/+4
Signed-off-by: Allan McRae <allan@archlinux.org>
2019-10-07Support file with seccomp enabledEli Schwartz1-0/+19
Not all compression types can be detected in the seccomp sandbox, so we need to disable it. This requires either configuring makepkg to know the sandbox is available, or checking for file >= 5.38 in which the sandbox option is a no-op even when seccomp is disabled. - Requires autoconf-archive for autotools version compare macro. - meson version comparison could be made a lot simpler using meson-git. Fixes FS#58626 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-03-19build: check for gpgme with pkg-config before gpgme-configEli Schwartz1-31/+37
gpgme in git master now supports pkg-config and with the next release we can and should prefer its use. However, retain the legacy code that enables building with older versions of gpgme, as a fallback. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-03-19drop DU* config variablesSantiago Torres1-10/+0
Since DUFLAGS and DUPATH are not needed anymore remove them from the source Signed-off-by: Santiago Torres <santiago@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-03-19build: remove references to variable replacements from pacman-optimizeEli Schwartz1-10/+0
MODECMD and OWNERCMD are not used by pacman itself, so we don't need to check for and replace them now that pacman-optimize is removed. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-02-12Add implicit fall through warningAllan McRae1-0/+1
Requires modification to our comment about fall through to match compilers expectations. Works for GCC and Clang. Signed-off-by: Allan McRae <allan@archlinux.org>
2019-02-04fix various typosmorganamilo1-1/+1
Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-10Add -fstack-clash-protection to CFLAGS in debug builds if availableAllan McRae1-0/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2018-12-03configure.ac: use $datarootdir instead of $prefix/shareAllan McRae1-2/+2
Even worse, makepkg-template ignored $prefix completely.
2018-10-19Port pactest to python3Dave Reisner1-1/+1
Use BytesIO instead of StringIO, and ensure that we unicode-encode data where needed.
2018-08-29Remove unused checks for strcoll and mktimeDave Reisner1-2/+0
We don't use these. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10configure: bump the minimum version of bash to 4.4Eli Schwartz1-3/+3
This is required in order to use declare -g and ${var@a} Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10scripts/completion: derive the bash completion directory from pkg-configEli Schwartz1-0/+3
Default to the standard completionsdir, which is lazy-loaded, rather than hardcoding the compatdir which is not. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-07-27Release v5.1.1v5.1.1Allan McRae1-2/+2
Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-28Release v.5.1.0v5.1.0Allan McRae1-4/+4
Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-14Remove all modelines from the projectEli Schwartz1-2/+0
Many of these are pointless (e.g. there is no need to explicitly turn on spellchecking and language dictionaries for the manpages by default). The only useful modelines are the ones enforcing the project coding standards for indentation style (and "maybe" filetype/syntax, but everything except the asciidoc manpages and makepkg.conf is already autodetected), and indent style can be applied more easily with .editorconfig Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-04-29libalpm.pc: migrate to Requires.privateEli Schwartz1-0/+6
pkg-config has built-in dependency handling, but we currently insert the raw $LIBS into libalpm's own linker flags and fail to handle Cflags at all. For dependencies which support pkg-config, simply use that instead. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-03-14autoconf: bump AC_PREREQ to 2.64Huáng Jùnliàng1-1/+1
The acinclude.m4 uses AS_VAR_APPEND macro. This marco is introduced in 2.64[1], hence we bump AC_PREREQ to 2.64 to avoid undefined marco on 2.63 autoconf. [1] https://lists.gnu.org/archive/html/autoconf/2009-07/msg00079.html Signed-off-by: Huáng Jùnliàng <i@jhuang.me> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-03-14configure: bump libarchive requirementsHuáng Jùnliàng1-2/+2
bump libarchive requirement to >= 3.0.0 as we use `archive_write_free` available from 3.0.0 Signed-off-by: Huáng Jùnliàng <i@jhuang.me> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-09-14Make the flags used for sed -i configurableAlastair Hughes1-5/+11
Not all sed implementations on linux accept the --follow-symlinks argument, so let the user configure the arguments passed to sed if required. Signed-off-by: Alastair Hughes <hobbitalastair@gmail.com> [Allan: fixed configure summary output] Signed-off-by: Allan McRae <allan@archlinux.org>
2017-04-04Replace @SIZECMD@ with POSIX-compatible commandDrew DeVault1-5/+0
Now uses wc -c $file | cut -d' ' -f1, which works using only POSIX commands and removes the need for any platform-specific usages. Signed-off-by: Drew DeVault <sir@cmpwn.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-01-04configure.ac: Use POSIX compatible equality checksDave Reisner1-2/+2
Signed-off-by: Allan McRae <allan@archlinux.org>
2016-12-05Make DUFLAGS be overrideable during configureAlastair Hughes1-5/+9
Not all du implementations on linux accept --apparent-size, so let the user configure the arguments passed to du if required. This fixes FS#47943. Signed-off-by: Alastair Hughes <hobbitalastair@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-10-22Allow replacing libcrypto with libnettle in pacmanFlorian Weigelt1-12/+20
Add a --with-nettle configure option that directs pacman to use the libnettle hashing functions. Only one of the --with-libssl and --with-nettle configure options can be specified. [Allan: rewrote configure check] Signed-off-by: Allan McRae <allan@archlinux.org>
2016-10-10Remove contribAllan McRae1-2/+0
The contrib directory takes too much of the pacman developer's limited time, which could be better spent developing and reviewing patches for the primary projects. The community can pick this up in a separate repository if wanted. Signed-off-by: Allan McRae <allan@archlinux.org>
2016-10-10Remove internal md5 and sha2 implementationsAllan McRae1-0/+5
The internal implementations for md5 and sha256 checksums have not been merged from upstream sources for a long time. Instead of us carrying copies of code from other projects, we should just support building against multiple libraries that provide such functionality. This patch removes the md5 and sha2 code (originally obtained from PolarSSL) from our repository. The configure script will now error unless at least one library supporting checksum generation is present, with the only library currently supported being openssl. It will be relatively simple for other such libraries (e.g. nettle) to be supported if anyone wishes to add them. Signed-off-by: Allan McRae <allan@archlinux.org>
2016-08-31Remove AC_FUNC_MALLOC check.Alastair Hughes1-1/+0
We weren't supplying the rpl_malloc function needed if this failed, and didn't check for realloc, so just remove. Signed-off-by: Alastair Hughes <hobbitalastair@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-08-31Replace CURLOPT_PROGRESSFUNCTION with CURLOPT_XFERINFOFUNCTIONIvy Foster1-2/+2
Curl 7.32.0 added CURLOPT_XFERINFOFUNCTION, which deprecates CURLOPT_PROGRESSFUNCTION and means less casting doubles to size_ts for alpm. This change has no user-facing nor frontend-facing effects. Signed-off-by: Ivy Foster <ivy.foster@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-08-30contrib: Add documentation MakefileFlorian Pritz1-0/+1
Makefile.am is mostly copied from ./doc/Makefile.am Signed-off-by: Florian Pritz <bluewind@xinu.at>
2016-08-30configure.ac: Fix handling --with-libcurlOlivier Brunel1-2/+2
It was reported being --with-libcurl in the help (and the check for libcurl being installed used $with_libcurl accordingly), but the option handling was set using $with_curl and, therefore, expected option --with-curl. In the end, --with-libcurl wasn't recognized, and --with-curl had no effect. Signed-off-by: Olivier Brunel <jjk@jjacky.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-02-23Release 5.0.1v5.0.1Allan McRae1-2/+2
Signed-off-by: Allan McRae <allan@archlinux.org>
2016-01-30Release 5.0.0v5.0.0Allan McRae1-5/+5
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-04Add large file support CFLAGS to pkgconfig fileAllan McRae1-0/+9
Large file support is enabled by our configure script as required. If anything linking to libalpm does not also define large file support, there will be differences in the size of off_t which are not caught until runtime. Add the required CFLAGS to the pkg-config file so that users of libalpm know what flags are required. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-03-03common: Avoid errors on systems that define strnlen but not strndupWill Miles1-2/+2
Add a configure test for a system library supplied strnlen, and disable the embedded version in common if one is found. Signed-off-by: Will Miles <wmiles@sgl.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-02-20Release 4.2.1v4.2.1Allan McRae1-2/+2
Signed-off-by: Allan McRae <allan@archlinux.org>
2014-12-19Release 4.2.0Allan McRae1-4/+4
Signed-off-by: Allan McRae <allan@archlinux.org>
2014-09-23replace --reference on chmod/chown commandsWolfgang Bumiller1-0/+10
Signed-off-by: Allan McRae <allan@archlinux.org>
2014-01-28Remove ts and sw from vim modeline when noet is setFlorian Pritz1-1/+1
Forcing vim users to view files with a tabstop of 2 seems really unnecessary when noet is set. I find it much easier to read code with ts=4 and I dislike having to override the modeline by hand. Command run: find . -type f -exec sed -i '/vim.* noet/s# ts=2 sw=2##' {} + Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Allan McRae <allan@archlinux.org>
2014-01-06Remove -fgnu89-inline from compile optionsDan McGee1-2/+0
This was a hack done by me in commit d8e88aa0175fd back in 2007 that is no longer necessary, given a sufficiently smart compiler and one that supports the inline keyword. Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-10-14Bail early with a clear error message if Python runtime isn't 2.7+.Jeremy Heiner1-1/+1
Prior to this a test that used a feature too new for the runtime would blow up when it was "exec"d (possibly in the middle of a run of a bunch of tests) with an error message that was not very helpful. Remove Python 2.5 and 2.6 runtimes from the list configure searches. 2.5 suffers the problem described above. The code currently will run on 2.6 but, as was noted on the dev list, that runtime is at the end of its life, so 2.7 is a better cutoff. Signed-off-by: Jeremy Heiner <ScalaProtractor at gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21integrate tests with automakeAndrew Gregory1-0/+1
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22Use autoreconf in autogen.shAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-06-18Merge branch 'maint'Allan McRae1-4/+4
2013-06-184.1.2 release preparationv4.1.2Allan McRae1-2/+2
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-06-06Correct INODECMD for BSD and DarwinAllan McRae1-2/+2
Fixes FS#35469. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-05-29Add makepkg-templateFlorian Pritz1-0/+19
This allows for somewhat easy templating for PKGBUILDs. Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-05-074.1.1 release NEWS, version bumps, etc.v4.1.1Allan McRae1-2/+2
Signed-off-by: Allan McRae <allan@archlinux.org>
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-11-16 14:31:32 +0100