| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
pkgbase should be subject to the same restrictions as pkgname
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Especially when maintaining local templates in addition to the ones
stored in /usr/share/makepkg-template, it can be useful to include
templates stored in multiple different locations into one PKGBUILD. This
patch makes this possible by allowing --template-dir to be specified
multiple times.
This also introduces a dedicated error message when a template cannot be
found, in contrast to the already existing "Couldn't detect version for
template '%s'".
If a template of the same name is present in more than one of the given
directories, the last one always takes precedence.
Neither the default behaviour without the option given, nor the handling
of a single template dir is changed.
Signed-off-by: Dominik Fischer <d.f.fischer@web.de>
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
makepkg --packagelist prints the name of each package that would
normally be produced, minus $PKGEXT, and exits.
Implements FS#42150
Signed-off-by: Ivy Foster <joyfulgirl@archlinux.us>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
These three fields should be grouped together.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Reported-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Johannes Löthberg <johannes@kyriasis.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Johannes Löthberg <johannes@kyriasis.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This can decrease package size by optimizing PNG image size. Images are
just stored with better compression and/or filter options. The actual
image content is not altered.
Additionally this can automatically fix broken PNG images which caused
some trouble lately.
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Leave user files in place and save new config files with a .pacnew
extension. This reduces the complexity of file extraction and respects
the principle that pacman shouldn't modify files it didn't create.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
|
|
The required adding a Database Option section to the pacman man page
and adding more complete documentation for --asdeps and --asexplicit
as well.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Replace harcoded language code in example
Signed-off-by: Miguel de Val-Borro <miguel@archlinux.net>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
it's --syncdeps, not --syndeps
|
|
Signed-off-by: Miguel de Val-Borro <miguel@archlinux.net>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Updated as per Allan's suggestion and fixed Transifex URLs.
Signed-off-by: Miguel de Val-Borro <miguel@archlinux.net>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
--confirm cancels the effect of a previous --noconfirm.
This makes it easier for scripts to default to --noconfirm
but allow users to override it.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Rather than implementing suffix matching, which might clash, let's just
print the full fingerprint of the err'ing key so that the user can
copy/paste it into validpgpkeys. Also, make it clear in the manpage
that validpgpkeys needs full fingerprints, and nothing else.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This reverts commit 50296576d006d433fbfd4a6c57d5f95a942f7833.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Refer to install scripts as scripts and not hooks.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The website sarovar.org has been shut down and the tutorial is
not relevant any more.
Signed-off-by: Miguel de Val-Borro <miguel@archlinux.net>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This allows to ignore specific dependencies.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
|
|
I found this feature confusing, and the documentation wasn't any help.
It was pointed out to me on IRC that validpgpkeys expects full
fingerprints, and won't accept shorter forms. This makes the
documentation insufficient, and the variable name itself misleading.
This patch bolsters the documentation to explain more about what the
contents should be, and implements suffix matching to allow matching on
shorters fingerprint suffices. Now, when makepkg tells you that a key
ID isn't valid, it's sufficient to manually check the key ID against
the known good ID, and add it as is to validpgpkeys.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This implements support for declarations such as:
arch=('i686' 'x86_64')
...
source=("somescript.sh")
source_i686=("http://evilmonster.com/i686/ponies-9001-1.i686.bin")
source_x86_64=("http://evilmonster.com/i686/ponies-9001-1.x86_64.bin")
md5sums=('d41d8cd98f00b204e9800998ecf8427e')
md5sums_i686=('e4ca381035a34b7a852184cc0dd89baa')
md5sums_x86_64=('4019740e6998f30a3c534bac6a83f582')
Just the same as the "untagged" sources, multiple integrity algorithms
are supported. The manpage is updated to reflect support for these
suffices.
This commit also refactors download_sources slightly:
1) to use the otherwise preferred convention of lowercase local variable
names, and to make the handling of $1 more clear.
2) rename the "fast" parameter to "novcs", to make it more clear what
this token does.
3) add a new possible token "allarch" to ensure that download_sources
will fetch all sources, for all architectures.
|
|
Change e10775340 should have included this.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The example for human-readable values must not contain a space between
the value and the unit; otherwise, pkgdelta will not recognize the
command options and will error out.
In prose, however, there should be a space between the value and the
unit.
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Remove blank lines immediately following section headings.
Ensure two blank lines before the start of a new section.
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Notable changes:
* Add double quotes around printf-like formatting options for "--print-format"
* Add a missing backslash in '--force'
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This introduces support for architecture-specific conflicts, depends,
optdepends, makedepends, replaces, and conflicts by appending "_$CARCH"
to the array name. For example, in the global section:
arch=('i686' 'x86_64')
depends=('foo')
depends_x86_64=('bar')
This will generate depends of 'foo' and 'bar' on x86_64, but only 'foo'
on i686. Moreover, this is supported in the package functions with the
same heuristics as the generic names, e.g.
...
arch=('i686' 'x86_64')
depends=('foo')
...
package_somepkg() {
depends_x86_64=('bar')
...
}
Again, will cause x86_64 to have depends of 'foo' and 'bar', but only
'foo' for i686.
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This option is only for HTML output, and we're building manpages here.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Dependencies are now handled with --nobuild unless specificially skipped.
Using --verifysource will skip dependency checks unless --syncdeps is
specified.
Fixes FS#35057 and FS#36999.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Add an array VCSCLIENTS to makepkg.conf that matches vcs source protocols
to the package containing the software needed for handling the source.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Add support for following the XDG Base Directory Specification when
reading the user-specific configuration file.
If no $XDG_CONFIG_HOME/pacman/makepkg.conf file exists we fall back to
sourcing $HOME/.makepkg.conf
Signed-off-by: Johannes Löthberg <johannes@kyriasis.com>
[Allan] Note XDG_CONFIG_HOME takes priority.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We expect all source file to lie in $startdir. However, using
"makepkg -p <buildscript>" can currently allows people to specify buildscripts
in other directories. This results in confusion about where other sources
should lie (in startdir or in the directory that the buildscript is in).
Explicitly disable using -p for files in other directories to avoid this issue.
Fixes FS#40293.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If validpgpkeys is set in the PKGBUILD, signature checking fails if
the fingerprint of the key used to create the signature is not listed
in the array.
The key's trust value is ignored.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Packaging outside of fakeroot can result in incorrect permissions for
package files. It has been years since fakeroot issues during packaging
were common, so it is safe to enforce fakeroot usage. If using fakeroot
is impossible for some reason, a two line wrapper script will suffice to
fool makepkg.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The days of fakeroot being error ridden are long gone, so there is no
valid reason to run makepkg as root.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
1. Packagers who want to test the package() function, i.e. to check the content
of the pkg/ folder.
2. Developers who want to check how the packaged version of a program looks, in
other words how the pkg/ folder looks.
3. For users of systems with no port tree, makepkg can ease package creation.
However the resulting archive of the whole makepkg process is often useless.
For all situations, makepkg will usually be called several times. But no archive
(the final package) is needed in any cases. The archive creation ends up being a
waste of time and resource, especially for big applications and slow machines.
Since this option aborts the process prematurely, it behaves like the
-o,--nobuild option, i.e. any other option acting on later stages in the process
will be automatically discarded. For --noarchive, it means that in
$ makepkg --noarchive --install
the '--install' option does not do anything.
Signed-off-by: Pierre Neidhardt <ambrevar@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Another small patch that I made long ago (but was too lazy to submit
back then).
When using XferCommand, TotalDownload option is not take into account.
Regards, Matthias
>From bff946cd9969b6bc6243875e0759f0ee02e487de Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Matthias=20Kr=C3=BCger?= <matthias.krueger@famsik.de>
Date: Thu, 9 May 2013 13:21:04 +0200
Subject: [PATCH] doc: pacman.conf: note that TotalDownload and XferCommand
options are incompatible.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Matthias Krüger <matthias.krueger@famsik.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Pierre Neidhardt <ambrevar@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The change log prototype should be distribution determined.
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
