summaryrefslogtreecommitdiffstats
path: root/doc
AgeCommit message (Collapse)AuthorFilesLines
2019-10-22Fix distribution of meson filesAllan McRae1-0/+1
Also caught the source of a man page not being distributed. Signed-off-by: Allan McRae <allan@archlinux.org>
2019-10-21Release v5.2.0v5.2.0Allan McRae1-0/+2
Signed-off-by: Allan McRae <allan@archlinux.org>
2019-10-07makepkg: add rust support for *FLAGS and debug-prefix-mapEli Schwartz1-0/+9
The rust language supports $RUSTFLAGS to be used automatically in all rustc invocations. Allow setting this in makepkg.conf (e.g. for optimization or debuginfo support), and teach debug+strip to pass the rustc command line argument necessary to rewrite source file paths in the debugging symbols. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-10-04makepkg.conf.5: Document PACKAGER format requirementsAllan McRae1-0/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2019-10-04autotools: distribute meson filesEli Schwartz1-0/+1
If we use make dist to create the official, signed release tarballs, those will not have meson build files by default since autotools doesn't know what they are. Also distribute all src/common/ files. We never strictly needed any of them to be distributed with autotools, because the dist tarball dereferences the symlinks (???), but only some of them were being distributed, and meson needs them to be in the right location as we only build libcommon from the primary files. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-06-06hooks: rename type File to PathAndrew Gregory1-8/+9
Make it clearer that the targets are matched against both directories and regular files and free up File to potentially refer specifically to regular files in the future. File is retained as a deprecated alias for Path for the time being to avoid breaking existing hooks and will be removed in a future release. See FS#53136. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-06-06pacman: rework the UI of -Fmorganamilo1-10/+4
Reworks the UI of -F according to FS#47949 In short -F replaces both -Fs and -Fo. Searching for an exact path (target contains "/"), causes the output to switch to the old -Fo output. Otherwise the old -Fs output is used. Also strip the leading "/" from targets like how -Qo does. Signed-off-by: Allan McRae <allan@archlinux.org>
2019-05-28doc: update SRCEXT/PKGEXT to reduce needlessly scary warningsEli Schwartz3-4/+9
Currently this tells people that the settings should not be touched, but we should just rely on the description of what it should be set to, and leave it up to the user. With the previous patch, makepkg aborts if an invalid value is set, greatly reducing the danger of it being badly configured. Also make this clearer by indicating when it would be useful to change the settings -- i.e. disable compression -- and ensure their described defaults are based on the ones established during ./configure or meson setup. Reported-by: Jouke Witteveen <j.witteveen@gmail.com> Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-05-08makepkg: propagate error codes when package failed to sign correctlyEli Schwartz1-1/+1
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-03-20Use bug tracker to track bugsAllan McRae1-2/+3
The mailing list requires subscription. So does the bug tracker, but that is more obvious. Signed-off-by: Allan McRae <allan@archlinux.org>
2019-03-19doc: generalize description of the bash nature of PKGBUILD functionsEli Schwartz1-8/+9
Currently this is scoped to the build() function, which is simply wrong as it equally applies to any function. Simply moving the paragraphs up to the main manpage section makes this clear. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-03-19Clarify that build_options only apply during build()Que Quotion1-4/+4
Signed-off-by: Que Quotion <quequotion@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-03-07Make pacman forget deltas existAllan McRae1-8/+0
Dummy callbacks are still present to prevent compiler warnings until libalpm is delta free. Also remove Delta parsing from pacman.conf. Signed-off-by: Allan McRae <allan@archlinux.org>
2019-03-07Remove pkgdeltaAllan McRae4-57/+0
Signed-off-by: Allan McRae <allan@archlinux.org>
2019-03-07Remove delta support from repo-addAllan McRae1-14/+8
Signed-off-by: Allan McRae <allan@archlinux.org>
2019-03-07doc: add man page for pacman-conflast-deltapkgs-commitJelle van der Waa3-1/+70
Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-03-07doc: set rootdir correctly in man pagesJelle van der Waa3-2/+4
If an alternative rootdir is specified in either meson or configure it's not respected in the generated man pages. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-03-07makepkg: add new checksum algorithm via coreutils b2sumEli Schwartz2-2/+2
coreutils 8.26 in December 2016 added this new hashing method which is compatible with the existing md5sum and sha*sum tool usage, while using the blake2 hash algorithm. makepkg uses coreutils to provide source file integrity checks via ${integ}sum binaries and it makes sense to offer this as an additional option. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-02-04fix various typosmorganamilo1-2/+2
Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-30libmakepkg: Add lzip ext supportChloe Kudryavtsev1-1/+2
lzip is a lossless data compressor designed to replace gzip and bzip2 as the standard general-purpose compressed format. - add .lz (lzip) support to libmakepkg/util/compress.sh:compress_as - add COMPRESSLZ to makepkg.conf.in - document COMPRESSLZ - document PKGEXT with `.tar.lz` Signed-off-by: Chloe Kudryavtsev <toast@toastin.space> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-21Fix typo in pacman man pageAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-16meson: fix website targetEli Schwartz1-4/+13
A number of pages don't actually exist as html inside the source tree, and need to be generated even though they are manpages. This caused the website.tar.gz target to only work inside a dirty tree initially created by autotools. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-14update a bunch of links for https and to adapt to changing domainsEli Schwartz3-17/+15
projects.archlinux.org and mailman.archlinux.org are both migrated to new domains. Transifex supports https, so encourage its use by default. Take advantage of the opportunity when updating these links, to also delist some projects that are dead. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-14doc: add a couple missing manpages from the html indexEli Schwartz1-0/+2
The index embeds the names of all doc subpages, and these were never updated. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-14doc: keep manpages and html pages in syncEli Schwartz1-13/+1
We forgot to add BUILDINFO to the list of html docs. Instead of always updating things in two places, just derive the one from the other. meson did not have this problem as it already derives both lists from one template. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-12-25update NEWS for v5.1.2Andrew Gregory1-0/+1
Signed-off-by: Andrew Gregory <andrew@archlinux.org> (cherry picked from commit f8c73464c9cf86d6b917542585d74514f150c67b)
2018-12-25update NEWS for v5.0.2Andrew Gregory1-0/+1
Signed-off-by: Andrew Gregory <andrew@archlinux.org> (cherry picked from commit fdf53393bc996a514bbfc9fcd6ea19a8bb2f02ed)
2018-11-27Remove Doxyfile from EXTRA_DISTAllan McRae1-1/+0
We generate this now, so no need to distribute. Fixes "make dist". Signed-off-by: Allan McRae <allan@archlinux.org>
2018-11-03pacman-key: just accept one file to verify, and enforce detached sigsEli Schwartz1-1/+7
Simply pass options on to gpg the same way gpg uses them -- no looping through and checking lots of signatures. This prevents a situation where the signature file to be verified is manipulated to contain an embedded signature which is valid, but not a detached signature for the file you are actually trying to verify. gpg does not offer an option to verify many files at once by naming each signature/file pair, and there's no reason for us to do so either, since it would be quite tiresome to do so. In the event that there is no signature/file pair specified to pacman-key itself, - preserve gpg's behavior, *if* the matching file does not exist, by - assuming the signature is an embedded signature - deviate from gpg's behavior, by - offering a security warning about which one is happening - when there is an embedded signature *and* a matching detached file, assume the latter is desired Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-11-02Add meson.build files to build with mesonDave Reisner1-0/+138
Provide both build systems in parallel for now, to ensure that we work out all the differences between the two. Some time from now, we'll give up on autotools. Meson tends to be faster and probably easier to read/maintain. On my machine, the full meson configure+build+install takes a little under half as long as a similar autotools-based invocation. Building with meson is a two step process. First, configure the build: meson build Then, compile the project: ninja -C build There's some mild differences in functionality between meson and autotools. specifically: 1) No singular update-po target. meson only generates individual update-po targets for each textdomain (of which we have 3). To make this easier, there's a build-aux/update-po script which finds all update-po targets and runs them. 2) No 'make dist' equivalent. Just run 'git archive' to generate a suitable tarball for distribution.
2018-10-23Dynamically generate Doxyfile from inputDave Reisner3-2/+6
This isn't super interesting for the autotools side, but it's necessary in order to make things sane for other build systems which we might introduce in the future.
2018-09-19makepkg: add support for the zst formatEli Schwartz1-1/+2
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-09-18doc: Remove double spacesRikard Falkeborn2-2/+2
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-29doc: use more implicit rules to build manpagesDave Reisner1-22/+12
Use implicit dependency rules to translate asciidoc inputs to HTML and manpage outputs. We should only have to declare explicit dependencies for odd cases, e.g. the PKGBUILD documentation has an additional include file and isn't a 1:1 conversion. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10Add lz4 compression support to makepkgAlex Butler1-1/+2
Adds opt-in lz4 compression of *pkg.tar files with makepkg. This is nice to have as an option for very fast compression and is already installed with libarchive. Signed-off-by: Alex Butler<alexheretic@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-07-27Release v5.1.1v5.1.1Allan McRae1-0/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2018-07-27alpm-hooks.5: include more information on hook filesJouke Witteveen1-2/+6
Signed-off-by: Allan McRae <allan@archlinux.org>
2018-07-27makepkg.conf: add missing sha224 sumsMichael Straube1-1/+1
Add missing sha224 sums to makepkg.conf and it's man page. Signed-off-by: Michael Straube <michael.straube@posteo.de> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-07-25doc: declare what type of comments we support in pacman.confEli Schwartz1-0/+3
Ini-style configuration formats are all over the place. So are we, for that matter, as we switched how we treated middle-of-line comments in commit 8a19c4a78251c5e34ecf508a65d943ca2dc833c7 -- namely, they're not comments anymore. This is surprising to users, who report bugs because it used to work, but what's more surprising is that the only "documentation" for the type of comments users can be expected to use, is by guessing from our example pacman.conf and maybe discovering unreliable easter eggs. Fixes FS#58809 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-07-25Revert "Deprecate --root in favour of --sysroot"Allan McRae1-0/+10
The use of --sysroot in the real world has flagged some issues that need addressing. Undeprecate --root for now. This reverts commit a278356f75866f89232e3e6230bbf9fb2dc1893c. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-06-19PKGBUILD(5): Remove reference to ChangeLog prototype inclusionAllan McRae1-3/+3
We do not distribute a ChangeLog prototype, so should not reference it in the man page. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-06-18Add missing sha224 sums in man page and lintingmorganamilo1-1/+1
Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-06-18PKGBUILD.5: document restriction on pkgrelAllan McRae1-2/+4
The format of pkgrel was much more retrictive than described in the man page. Update the documentation to reflect this. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-06-18libmakepkg/lint_pkgbuild: permit versioned optdependsEli Schwartz1-2/+3
pacman accepts these, and there is no good reason to be more restrictive ourselves; we should follow the example of "depends" here. Update the documentation to actually state that this is supported. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-28Apparently we live in the future!Allan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-28Release v.5.1.0v5.1.0Allan McRae1-0/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-14Ensure better text editor automatic filetype detectionEli Schwartz18-47/+47
Since we no longer use vim-specific modelines, use the .asciidoc file extension which is, well, reserved for asciidoc formatted files. This should presumably work everywhere without needing editor-specific workarounds and configuration. Also add a shebang to makepkg.conf to indicate it contains bash content. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-14Remove all modelines from the projectEli Schwartz17-53/+0
Many of these are pointless (e.g. there is no need to explicitly turn on spellchecking and language dictionaries for the manpages by default). The only useful modelines are the ones enforcing the project coding standards for indentation style (and "maybe" filetype/syntax, but everything except the asciidoc manpages and makepkg.conf is already autodetected), and indent style can be applied more easily with .editorconfig Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-12libmakepkg: Support file 5.33's application/x-pie-executableJan Alexander Steffens (heftig)1-2/+2
file 5.33 introduces a new MIME type "application/x-pie-executable", which is used for relocatable binaries. makepkg ignored these binaries and did not attempt to strip them. Handle the new MIME type like the old "application/x-sharedlib". Stripping the binaries with --strip-unneeded to keep relocation information should be the correct thing to do. file 5.33 also misidentifies actual libraries as PIE executables, so we didn't strip any shared libraries, either. We now work around this bug. Signed-off-by: Jan Alexander Steffens (heftig) <jan.steffens@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-12Append architecture information to 'installed' elements in .BUILDINFORobin Broda1-1/+1
Adding the architecture to the 'installed' elements of the .BUILDINFO file makes it easier to retrieve the packages needed to reconstruct the build environment. Signed-off-by: Robin Broda <robin@broda.me> Signed-off-by: Allan McRae <allan@archlinux.org>
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-11-18 09:28:07 +0100