Age | Commit message (Collapse) | Author | Files | Lines |
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If we use make dist to create the official, signed release tarballs,
those will not have meson build files by default since autotools doesn't
know what they are.
Also distribute all src/common/ files. We never strictly needed any of
them to be distributed with autotools, because the dist tarball
dereferences the symlinks (???), but only some of them were being
distributed, and meson needs them to be in the right location as we only
build libcommon from the primary files.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Make it clearer that the targets are matched against both directories
and regular files and free up File to potentially refer specifically to
regular files in the future. File is retained as a deprecated alias for
Path for the time being to avoid breaking existing hooks and will be
removed in a future release.
See FS#53136.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Reworks the UI of -F according to FS#47949
In short -F replaces both -Fs and -Fo.
Searching for an exact path (target contains "/"), causes the output to
switch to the old -Fo output. Otherwise the old -Fs output is used.
Also strip the leading "/" from targets like how -Qo does.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Currently this tells people that the settings should not be touched, but
we should just rely on the description of what it should be set to, and
leave it up to the user. With the previous patch, makepkg aborts if an
invalid value is set, greatly reducing the danger of it being badly
configured.
Also make this clearer by indicating when it would be useful to change
the settings -- i.e. disable compression -- and ensure their described
defaults are based on the ones established during ./configure or meson
setup.
Reported-by: Jouke Witteveen <j.witteveen@gmail.com>
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The mailing list requires subscription. So does the bug tracker,
but that is more obvious.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Currently this is scoped to the build() function, which is simply wrong
as it equally applies to any function. Simply moving the paragraphs up
to the main manpage section makes this clear.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Que Quotion <quequotion@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Dummy callbacks are still present to prevent compiler warnings until
libalpm is delta free.
Also remove Delta parsing from pacman.conf.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If an alternative rootdir is specified in either meson or configure it's
not respected in the generated man pages.
Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
coreutils 8.26 in December 2016 added this new hashing method which is
compatible with the existing md5sum and sha*sum tool usage, while using
the blake2 hash algorithm.
makepkg uses coreutils to provide source file integrity checks via
${integ}sum binaries and it makes sense to offer this as an additional
option.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
lzip is a lossless data compressor designed to replace gzip and bzip2 as
the standard general-purpose compressed format.
- add .lz (lzip) support to libmakepkg/util/compress.sh:compress_as
- add COMPRESSLZ to makepkg.conf.in
- document COMPRESSLZ
- document PKGEXT with `.tar.lz`
Signed-off-by: Chloe Kudryavtsev <toast@toastin.space>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
A number of pages don't actually exist as html inside the source tree,
and need to be generated even though they are manpages.
This caused the website.tar.gz target to only work inside a dirty tree
initially created by autotools.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
projects.archlinux.org and mailman.archlinux.org are both migrated to
new domains.
Transifex supports https, so encourage its use by default.
Take advantage of the opportunity when updating these links, to also
delist some projects that are dead.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The index embeds the names of all doc subpages, and these were never
updated.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We forgot to add BUILDINFO to the list of html docs. Instead of always
updating things in two places, just derive the one from the other.
meson did not have this problem as it already derives both lists from
one template.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew@archlinux.org>
(cherry picked from commit f8c73464c9cf86d6b917542585d74514f150c67b)
|
|
Signed-off-by: Andrew Gregory <andrew@archlinux.org>
(cherry picked from commit fdf53393bc996a514bbfc9fcd6ea19a8bb2f02ed)
|
|
We generate this now, so no need to distribute. Fixes "make dist".
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Simply pass options on to gpg the same way gpg uses them -- no looping
through and checking lots of signatures.
This prevents a situation where the signature file to be verified is
manipulated to contain an embedded signature which is valid, but not a
detached signature for the file you are actually trying to verify.
gpg does not offer an option to verify many files at once by naming each
signature/file pair, and there's no reason for us to do so either, since
it would be quite tiresome to do so.
In the event that there is no signature/file pair specified to
pacman-key itself,
- preserve gpg's behavior, *if* the matching file does not exist, by
- assuming the signature is an embedded signature
- deviate from gpg's behavior, by
- offering a security warning about which one is happening
- when there is an embedded signature *and* a matching detached file,
assume the latter is desired
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Provide both build systems in parallel for now, to ensure that we work
out all the differences between the two. Some time from now, we'll give
up on autotools.
Meson tends to be faster and probably easier to read/maintain. On my
machine, the full meson configure+build+install takes a little under
half as long as a similar autotools-based invocation.
Building with meson is a two step process. First, configure the build:
meson build
Then, compile the project:
ninja -C build
There's some mild differences in functionality between meson and
autotools. specifically:
1) No singular update-po target. meson only generates individual
update-po targets for each textdomain (of which we have 3). To make
this easier, there's a build-aux/update-po script which finds all
update-po targets and runs them.
2) No 'make dist' equivalent. Just run 'git archive' to generate a
suitable tarball for distribution.
|
|
This isn't super interesting for the autotools side, but it's necessary
in order to make things sane for other build systems which we might
introduce in the future.
|
|
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Use implicit dependency rules to translate asciidoc inputs to HTML and
manpage outputs. We should only have to declare explicit dependencies
for odd cases, e.g. the PKGBUILD documentation has an additional include
file and isn't a 1:1 conversion.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Adds opt-in lz4 compression of *pkg.tar files with makepkg.
This is nice to have as an option for very fast compression
and is already installed with libarchive.
Signed-off-by: Alex Butler<alexheretic@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Add missing sha224 sums to makepkg.conf and it's man page.
Signed-off-by: Michael Straube <michael.straube@posteo.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Ini-style configuration formats are all over the place. So are we, for
that matter, as we switched how we treated middle-of-line comments in
commit 8a19c4a78251c5e34ecf508a65d943ca2dc833c7 -- namely, they're not
comments anymore. This is surprising to users, who report bugs because
it used to work, but what's more surprising is that the only
"documentation" for the type of comments users can be expected to use,
is by guessing from our example pacman.conf and maybe discovering
unreliable easter eggs.
Fixes FS#58809
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The use of --sysroot in the real world has flagged some issues that need
addressing. Undeprecate --root for now.
This reverts commit a278356f75866f89232e3e6230bbf9fb2dc1893c.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We do not distribute a ChangeLog prototype, so should not reference
it in the man page.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The format of pkgrel was much more retrictive than described in the
man page. Update the documentation to reflect this.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
pacman accepts these, and there is no good reason to be more restrictive
ourselves; we should follow the example of "depends" here.
Update the documentation to actually state that this is supported.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Since we no longer use vim-specific modelines, use the .asciidoc file
extension which is, well, reserved for asciidoc formatted files. This
should presumably work everywhere without needing editor-specific
workarounds and configuration.
Also add a shebang to makepkg.conf to indicate it contains bash content.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Many of these are pointless (e.g. there is no need to explicitly turn on
spellchecking and language dictionaries for the manpages by default).
The only useful modelines are the ones enforcing the project coding
standards for indentation style (and "maybe" filetype/syntax, but
everything except the asciidoc manpages and makepkg.conf is already
autodetected), and indent style can be applied more easily with
.editorconfig
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
file 5.33 introduces a new MIME type "application/x-pie-executable",
which is used for relocatable binaries. makepkg ignored these binaries
and did not attempt to strip them.
Handle the new MIME type like the old "application/x-sharedlib".
Stripping the binaries with --strip-unneeded to keep relocation
information should be the correct thing to do.
file 5.33 also misidentifies actual libraries as PIE executables, so we
didn't strip any shared libraries, either. We now work around this bug.
Signed-off-by: Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Adding the architecture to the 'installed' elements of the .BUILDINFO
file makes it easier to retrieve the packages needed to reconstruct
the build environment.
Signed-off-by: Robin Broda <robin@broda.me>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Architecture information is required for repro tooling
This is a revised version of https://patchwork.archlinux.org/patch/475/
Signed-off-by: Robin Broda <robin@broda.me>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|