| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This should hopefully address some of the concerns raised in FS#11639 with
regards to continuing after filling the disk up.
Add some more checks and passing of error conditions between our functions.
When a libarchive warning is encountered, check if it is due to lack of disk
space and if so upgrade it to an error condition. A review of other
libarchive warnings suggests that these are less critical and can remain as
informative warning messages at this stage.
Note the presence of errors after extraction of an entire package is complete.
If so, we abort the transaction to be on the safe side and keep damage to a
minimum.
Signed-off-by: Dan McGee <dan@archlinux.org>
[Allan: make ENOSPC warning into an error]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Rather than hiding these warnings, show them to the user as they happen.
This will prevent things such as hiding full filesystem errors (ENOSPC) from
the user as seen in FS#11639.
Signed-off-by: Dan McGee <dan@archlinux.org>
[Allan: adjust warning wording and add gettext calls]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Put the db_operations struct to use and completely split the handling
of the sync and local databases.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The file be_files.c is "split" to be_local.c and be_sync.c in order
to achieve separate handling of sync and local databases.
Some basic clean-up of functions that are only of use for local or
sync databases has been performed and some rough function renaming
in duplicated code has been performed to prevent compilation errors.
However, most of the clean-up and final separation of sync and local
db handling occurs in following patches.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Cache bullshit only has relevance to be_files, so move it there.
Signed-off-by: Dan McGee <dan@archlinux.org>
[Allan: BIG rebase]
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Prevents compiler warnings when building with -D_FORTIFY_SOURCE=2
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
- remove unused variables
- some more sanity checks
- safer printf
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Commit 34e1413d75 attempted to implement lazy loading of package databases.
Although it took care of my main complaint (creating the database directory
if it didn't exist), it didn't allow sync repos to be registered before
alpm_option_set_dbpath() had been called.
With this patch, we no longer compute the individual repository DB paths
until necessary, allowing full lazy loading to work as intended, and
allowing us to drop the extra setlibpath() calls from the frontend. This
allows the changes introduced in a2cd48960 (but later reverted) to be added
back in again.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Message updates made this one a bit messy, but nothing too bad.
Conflicts:
lib/libalpm/add.c
lib/libalpm/remove.c
|
|
Add more untranslated strings, improve consistency, etc.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
-int alpm_trans_sysupgrade(int enable_downgrade);
-int alpm_trans_sync(char *target);
-int alpm_trans_add(char *target);
-int alpm_trans_remove(char *target);
+int alpm_sync_sysupgrade(int enable_downgrade);
+int alpm_sync_target(char *target);
+int alpm_sync_dbtarget(char *db, char *target);
+int alpm_add_target(char *target);
+int alpm_remove_target(char *target);
* functions renaming
* add new sync_dbtarget which allows to specify the db
* repo/ syntax handling is moved to frontend
( should implement FS#15141)
* group handling is moved to backend
( see http://www.archlinux.org/pipermail/pacman-dev/2009-June/008847.html )
|
|
This basically started with this change :
/* Transaction */
struct __pmtrans_t {
- pmtranstype_t type;
pmtransflag_t flags;
pmtransstate_t state;
- alpm_list_t *packages; /* list of (pmpkg_t *) */
+ alpm_list_t *add; /* list of (pmpkg_t *) */
+ alpm_list_t *remove; /* list of (pmpkg_t *) */
And then I have to modify all the code accordingly.
|
|
This patch utilizes the power of sync.c to fix FS#3492 and FS#5798.
Now an upgrade transaction is just a sync transaction internally (in alpm),
so all sync features are available with -U as well:
* conflict resolving
* sync dependencies from sync repos
* remove unresolvable targets
See http://www.archlinux.org/pipermail/pacman-dev/2009-June/008725.html
for the concept.
We use "mixed" target list, where PKG_FROM_FILE origin indicates local
package file, PKG_FROM_CACHE indicates sync package. The front-end can add
only one type of packages (depending on transaction type) atm, but if alpm
resolves dependencies for -U, we may get a real mixed trans->packages list.
_alpm_pkg_free_trans() was modified so that it can handle both target types
_alpm_add_prepare() was removed, we use _alpm_sync_prepare() instead
_alpm_add_commit() was renamed to _alpm_upgrade_targets()
sync.c (and deps.c) was modified slightly to handle mixed target lists,
the modifications are straightforward. There is one notable change here: We
don't create new upgrade trans in sync.c, we replace the pkgcache entries
with the loaded package files in the target list (this is a bit hackish) and
call _alpm_upgrade_targets(). This implies a TODO (pkg->origin_data.db is
not accessible anymore), but it doesn't hurt anything with pacman front-end,
so it will be fixed later (otherwise this patch would be huge).
I updated the documentation of -U and I added a new pactest, upgrade090.py,
to test the syncdeps feature of -U.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This happens for example if you install a new package, and one of its
backup config file is already on the file system.
If the local file was different, it was saved to .pacorig which is fine.
However if the local file and pkg file were the same, the pkg file
(temporarily extracted as .paccheck) was left on the system.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
When one package wants to replace a directory by a file, we check that all
files in that directory were owned by that package.
Additionally pacman can be more verbose when the extraction of the symlink
(or file) fails. The patch to add.c looks more complex than it is, I just
moved and reindented code to handle cases 10 and 11 together.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes FS#15294.
The code to run a command inside a chroot was refactored from the
_alpm_runscriptlet function to _alpm_run_chroot.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
From now on _alpm_db_find_fileconflicts() works with upgrade and remove
target lists (like checkdeps), which makes it transaction independent
(we still need a trans param because of the progressbar). This is a small
step towards the universal transaction. So we call this function directly
from sync.c before commiting the remove transaction. This is much safer,
but we can get false fileconflict error alarms in some tricky cases
("symlinks puzzle" etc).
The patch on find_fileconflict looks complex, but it is mainly an
"indent-patch", the new code-part can be found after the
/* check remove list ... */ comment, and I modified something around the
"file has changed hand" case (see comment modifications in the code).
Unfortunately sync.c became more ugly, because we have to create 2 parallel
internal transactions: to avoid duplicated work, upgrade transaction is
used to load package data (filelists). This problem will disappear, when
we finally get rid of internal transactions.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
This patch fixes FS#12148 ('unstable' regular file).
I also changed the other archive_entry_set_mode usage in add.c to
archive_entry_set_perm.
Since I cannot find any relevant info in libarchive manual, I quote
Tim Kientzle (the author of libarchive) here, and I say thank you for
his help.
*** Tim Kientzle wrote *************************************
This is the problem in libalpm/util.c:
323 if(S_ISREG(st->st_mode)) {
324 archive_entry_set_mode(entry, 0644);
325 } else if(S_ISDIR(st->st_mode)) {
326 archive_entry_set_mode(entry, 0755);
327 }
Your example unstable.db.tar.gz is not empty. It has
one entry in it, called "./". That entry is marked
as a directory. But, when you call archive_entry_set_mode(),
you are changing the file type! archive_read_extract()
then creates the file /var/unstable as you requested.
(archive_read_extract() will replace an empty directory
with a file.)
You should either set the mode value correctly:
323 if(S_ISREG(st->st_mode)) {
324 archive_entry_set_mode(entry, IFREG | 0644);
325 } else if(S_ISDIR(st->st_mode)) {
326 archive_entry_set_mode(entry, IFDIR | 0755);
327 }
Or use archive_entry_set_perm(), which does not change
the file type:
323 if(S_ISREG(st->st_mode)) {
324 archive_entry_set_perm(entry, 0644);
325 } else if(S_ISDIR(st->st_mode)) {
326 archive_entry_set_perm(entry, 0755);
327 }
************************************************************
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
alpm_dep_compute_string
This patch introduces the following function name convention:
_compute_ in function name: the return value must be freed.
_get_ in function name: the return value must not be freed.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Changelogs and install files were getting extracted into the local
db folder before it was manually created. This created issues for
uses with 0077 umasks and was highlighted with the new sudo handling
of umasks (FS#12263).
This moves the local db creation to its own function which is called
before the start of package archive extraction. Also, added a check
that the folder is actually created.
Signed-off-by: Allan McRae <allan@archlinux.org>
[Dan: rename to _alpm_db_prepare()]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
These two functions now take directly a package list rather than a database.
checkdbconflicts was renamed to checkconflicts.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
|
|
This is more rational and coherent with PM_TRANS_EVT_UPGRADE_DONE.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes FS#11218.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
In case of error some allocated memory wasn't freed in commit_single_pkg.
Note: The return value of this function is not used.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The dynamic pmconflict_t must be freed with _alpm_conflict_free.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Errors like the following one happen regularly (for unknown reasons...) :
error: could not open file /var/lib/pacman/local//glibc-2.7-9/depends: No
such file or directory
Anyway, every time an user reported an error like that, it always seemed
like he thought the error was caused by the double /, which is obviously
wrong.
Since db->path always include a trailing /, there is no need to add one when
concatenating paths in be_files.c or add.c.
Additionally, some static strings were switched to dynamic.
And the computation of the "dbpath"/"pkgname"-"pkgversion" was refactored
in db_read, db_write and db_remove with a get_pkgpath static function.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We have been using unsigned long as a file size type for a while, which
works but isn't quite correct and could easily break. Worse was probably our
use of int in the download callback functions, which could be restrictive
for packages > 2GB in size.
Switch all file size variables to use off_t, which is the preferred type for
file sizes. Note that at least on Linux, all applications compiled against
libalpm must now be sure to use large file support, where _FILE_OFFSET_BITS
is defined to be 64 or there will be some weird issues that crop up.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This event was unused, was missing the equivalent EXTRACT_DONE event, and
was useless because we already have ADD / UPGRADE START and DONE events.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Actually, just rename _alpm_versioncmp to alpm_pkg_vercmp and get rid of the
need for a wrapper since it did nothing anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* remove obsolete and unused *_cmp helper functions like deppkg_cmp and
_alpm_grp_cmp
* new alpm_list_remove_str function, used 6 times in handle.c
* remove _alpm_prov_cmp / _alpm_db_whatprovides and replace them by
a more general alpm_find_pkg_satisfiers with a cleaner implementation.
before: alpm_db_whatprovides(db, targ)
after: alpm_find_pkg_satisfiers(alpm_db_getpkgcache(db), targ)
* remove satisfycmp and replace alpm_list_find + satisfycmp usage by
_alpm_find_dep_satisfiers.
before : alpm_list_find(_alpm_db_get_pkgcache(db), dep, satisfycmp)
after : _alpm_find_dep_satisfiers(_alpm_db_get_pkgcache(db), dep)
* remove _alpm_pkgname_pkg_cmp, which was used with alpm_list_remove, and
use _alpm_pkg_find + alpm_list_remove with _alpm_pkg_cmp instead.
This commit actually get rids of all complicated and asymmetric _cmp
functions. I first thought these functions were worth it, be caused it
allowed us to reuse list_find and list_remove. But this was at the detriment
of the clarity and also the ease of use of these functions, dangerous
because of their asymmetricity.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We only need a copy of this string once we know we are going to extract it,
and we don't need a static buffer to copy it into since it is coming from a
known-length string.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We were a bit juryrigged using one call to mkstemp() before rather than
extracting the new files side-by-side and doing our comparisons there. We
were also facing some permissions issues. Instead, make our life easier by
extracting all temp files to a '.paccheck' extension, doing our md5
comparisons, and then taking the correct actions.
Still to be done here- a cleanup of the use of PATH_MAX which should not be
necessary if we use dynamic allocation on the heap.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
I'm not sure why these were ever here, as by this point we have already
extracted the file meaning a call to this function is basically a no-op.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Things must have gotten stricter with GCC 4.3 on the '%zd' printf string and
this is the first I've tried to compile there. Fix the problem by using
size_t instead of int.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: K. Piche <kevin@archlinux.org>
[Dan: removed one logger]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
There were a few issues with this code:
1. We already had an open fd to a file, but never used it to our benefit.
Use the libarchive convienence method to write the current file contents
straight to a file descriptor.
2. The real problem cropped up on Windows where the locking semantics caused
the old way of extraction to fail because we had an open file descriptor.
By using the file descriptor and closing it ASAP, we prevent these
failures.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Remove unused error codes, begin refactoring some of the others.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
After the libarchive upgrade from 2.4.12 to 2.4.14, our usage of
archive_entry_pathname became dangerous. We were using the result of that
function even after calls to archive_entry_set_pathname.
With 2.4.14, the entryname becomes wrong after these calls, and so all the
future use of entryname are bogus. entryname is used quite a lot for
logging, so that's not so bad. But it's also used for the backup handling,
so that's not very cool. For example, reinstalling a package with backup
entries will erase all the md5 entries from the DB, because they won't be
found back.
entryname is now a static string so that we can easily keep the result of
archive_entry_pathname.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: fixed version numbers in commit message]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
The _alpm_backup_split function always alloced memory for the fname, and we
let it disappear in a specific case (upgrade026.py). Fix the issue.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This was totally useless.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
