summaryrefslogtreecommitdiffstats
path: root/lib/libalpm/alpm.h
AgeCommit message (Collapse)AuthorFilesLines
2011-01-29alpm: new alpm_add_pkg interfaceXavier Chantry1-0/+2
This new function is meant to deprecate all existing sync/add target functions : int alpm_sync_target(char *target); int alpm_sync_dbtarget(char *db, char *target); int alpm_add_target(char *target); Rather than dropping these 3 interfaces, it might be better to rewrite them using alpm_add_pkg for now. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2011-01-29alpm/dep: add alpm_find_dbs_satisfierXavier Chantry1-0/+1
This is a public interface for resolvedep. It looks nicer to expose it this way rather than through sync_target. This function can also be helpful for external tools as it should give good results close to how pacman select a package for satisfying a given dep. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2011-01-29Add interactive provider selectionXavier Chantry1-0/+1
If there are multiple providers in one db, pacman used to just stop at the first one (both during dependency resolution or for pacman -S 'provision' which uses the same code). This adds a new conversation callback so that the user can choose which provider to install. By default (user press enter or --noconfirm), the first provider is still chosen, so for example the behavior of sync402 and 403 is preserved. But at least the user now has the possibility to make the right choice in a manual run. If one of the provider is already installed, it is picked for reinstall/upgrade, so that provision 002/003 pactest now pass. $ pacman -S community/smtp-server :: There are 3 providers available for smtp-server: 1) courier-mta 2) esmtp 3) exim Which one do you want to install? Enter a number (default=1): Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2011-01-29Remove need to explicitly register the local DBDan McGee1-2/+0
Perform the cheap struct and string setup of the local DB at handle initialization time to match the teardown we do when releasing the handle. If the local DB is not needed, all real initialization is done lazily after DB paths and other things have been configured anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Remove epoch as an independent fieldDan McGee1-1/+0
Instead, go the same route we have always taken with version-release in libalpm and treat it all as one piece of information. Makepkg is the only script that knows about epoch as a distinct value; from there on out we will parse out the components as necessary. This makes the code a lot simpler as far as epoch handling goes. The downside here is that we are tossing some compatibility to the wind; packages using force will have to be rebuilt with an incremented epoch to keep their special status. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-12Add a progressbar for package integrity checkingDan McGee1-0/+1
This can take a while too, and it is really easy to add the necessary callback stuff for adding a progressbar. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-08Use size_t for alpm_list sizesAllan McRae1-1/+1
There is a lot of swtiching between size_t and int for alpm_list sizes in the codebase. Start converting these to all be size_t by adjusting the return type of alpm_list_count and fixing all additional warnings given by -Wconversion that are generated by this change. Dan: a few more small changes to ensure things compile, adjusting some printf format string characters to accommodate the larger size on x86_64. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-08Update copyright years for 2011Allan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-30Add const to some ALPM function signaturesJakob Gruber1-4/+4
char * -> const char *. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-21Always specify arguement type in function delcarationsAllan McRae1-22/+22
Always declare a function with (void) rather than () when we expect no arguements. Fixes all warnings with -Wstrict-prototypes. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13Display progress bar for disk space checkingAllan McRae1-1/+6
Checking disk space needed for a transaction can take a while so add an informative progress bar. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13Add configuration option to control disk space checkingAllan McRae1-0/+3
Disk space checking is likely to be an unnecessary bottleneck to people with reasonable partition sizes so add a configuration option to allow it to be disabled/enabled as wanted. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13Implement disk space checkingAllan McRae1-0/+1
Pull together the work of the previous commits to implement a check for enough free space before performing an install transaction. Abort if there is not enough free space with an appropriate pm_errno.. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13alpm: don't expose alpm_depcmpXavier Chantry1-1/+0
Either we expose all low levels function dealing with pmdepend_t (splitdep and depfree come to mind), or we don't. Since none of the tools use depcmp, I chose to remove it. In the future, we might want to expose higher level functions such as alpm_find_satisfier, or just lower level functions like splitdep and depfree together with depcmp. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13alpm: kill alpm_deptestXavier Chantry1-1/+0
This has been replaced by the more flexible alpm_find_satisfier function, and alpm_deptest was completely unsused now. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13alpm: add new alpm_find_satisfier functionXavier Chantry1-0/+1
whatprovides and splitdep were removed, so depcmp alone is quite useless now without splitdep, and deptest is not flexible enough. Introduce a new alpm_find_satisfier which is hopefully more flexible, this should make implementation of deptest very easy, and also help alpm tools such as pactree. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-14Add epoch support to pacman/libalpmDan McGee1-1/+1
This will allow for better control of what was previously the 'force' option in a PKGBUILD and transferred into the built package. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-07-01Check return value of fwrite when copying filesAllan McRae1-0/+1
Check that writing to destination file actually occurs in _alpm_copyfile. Required adding a new error (PM_ERR_WRITE) as none of the others appeared appropriate. Prevents compiler warning when using -D_FORTIFY_SOURCE=2. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-05-05Introduce -D, --databaseNagy Gabor1-6/+10
The request of FS#12950 is implemented. On the backend side, I introduced a new function, alpm_db_set_pkgreason(), to modify the install reason of a package in the local database. On the front-end side, I introduced a new main operation, -D/--database, which has two options, --asdeps and --asexplicit. I documented this in pacman manual. I've created two pactests to test -D: database001.py and database002.py. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-15Bump copyright dates to 2010Dan McGee1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-15delta : add external cleanup scriptXavier Chantry1-0/+1
Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-16download: major refactor to address lingering issuesDan McGee1-5/+3
Sorry for this being such a huge patch, but I believe it is necessary for quite a few reasons which I will attempt to explain herein. I've been mulling this over for a while, but wasn't super happy with making the download interface more complex. Instead, if we carefully order things in the internal download code, we can actually make the interface simpler. 1. FS#15657 - This involves `name.db.tar.gz.part` files being left around the filesystem, and then causing all sorts of issues when someone attempts to rerun the operation they canceled. We need to ensure that if we resume a download, we are resuming it on exactly the same file; if we cannot be almost postive of that then we need to start over. 2. http://www.mail-archive.com/pacman-dev@archlinux.org/msg03536.html - Here we have a lighttpd bug to ruin the day. If we send both a Range: header and If-Modified-Since: header across the wire in a GET request, lighttpd doesn't do what we want in several cases. If the file hadn't been modified, it returns a '304 Not Modified' instead of a '206 Partial Content'. We need to do a stat (e.g. HEAD in HTTP terms) operation here, and the proceed accordingly based off the values we get back from it. 3. The mtime stuff was rather ugly, and relied on the called function to write back to a passed in reference, which isn't the greatest. Instead, use the power of the filesystem to contain this info. Every file downloaded internally is now carefully timestamped with the remote file time. This should allow the resume logic to work. In order to guarantee this, we need to implement a signal handler that catches interrupts, notifies the running code, and causes it to set the mtimes on the file. It then rethrows the signal so the pacman signal handler (or any frontend) works as expected. 4. We did a lot of funky stuff in trying to track the DB last modified time. It is a lot easier to just keep the downloaded DB file around and track the time on that rather than in a funky dot file. It also kills a lot of code. 5. For GPG verification of the databases down the road, we are going to need the DB file around for at least a short bit of time anyway, so this gets us closer to that. Signed-off-by: Dan McGee <dan@archlinux.org> [Xav: fixed printf with off_t] Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2009-10-12use bitwise shift operator in enum "bit field"solsTiCe d'Hiver1-28/+28
This offers a cleaner way to deal with constant in enum and allow easy maintainance Signed-off-by: solsTiCe d'Hiver <solstice.dhiver@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-11Add missing get_usedelta() methodDan McGee1-0/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-11typing: a few more fixes for special int typesDan McGee1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-11int typing: s/unsigned short/int/ in libalpmDan McGee1-6/+6
After our recent screwup with size_t and ssize_t in the download code, I found the `-Wsign-conversion` flag to GCC to see if we were doing anything else boneheaded. I didn't find anything quite as bad, but we did have some goofups- most of our public unsigned methods would return -1 on error, which is a bit odd in an unsigned context. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-12Change the interface for target loadingXavier Chantry1-4/+6
-int alpm_trans_sysupgrade(int enable_downgrade); -int alpm_trans_sync(char *target); -int alpm_trans_add(char *target); -int alpm_trans_remove(char *target); +int alpm_sync_sysupgrade(int enable_downgrade); +int alpm_sync_target(char *target); +int alpm_sync_dbtarget(char *db, char *target); +int alpm_add_target(char *target); +int alpm_remove_target(char *target); * functions renaming * add new sync_dbtarget which allows to specify the db * repo/ syntax handling is moved to frontend ( should implement FS#15141) * group handling is moved to backend ( see http://www.archlinux.org/pipermail/pacman-dev/2009-June/008847.html )
2009-09-09Remove transaction typeXavier Chantry1-12/+6
This basically started with this change : /* Transaction */ struct __pmtrans_t { - pmtranstype_t type; pmtransflag_t flags; pmtransstate_t state; - alpm_list_t *packages; /* list of (pmpkg_t *) */ + alpm_list_t *add; /* list of (pmpkg_t *) */ + alpm_list_t *remove; /* list of (pmpkg_t *) */ And then I have to modify all the code accordingly.
2009-09-09Add a new reason field to pmconflict_t structNagy Gabor1-0/+1
Sometimes "foo conflicts with bar" information is not enough, see this thread: http://bbs.archlinux.org/viewtopic.php?id=77647. That's why I added a new reason field to our pmconflict_t struct that stores the packager- defined conflict that induced the fact that package1 conflicts with package2. I modified the front-end (in callback.c, sync.c, upgrade.c) to print this new information as well. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
2009-09-06Check package arch before installingXavier Chantry1-0/+1
This implements FS#15622 Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-06Add Architecture and --arch optionXavier Chantry1-0/+3
Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-08-19dload.c : various fixesXavier Chantry1-2/+0
- fix one memleak if get_filename failed - cleanup according to Joerg's feedback: "url_for_string: If fetchParseURL returned successful, you should always have a scheme set. The logic for anonftp should only be needed for very broken server -- do you know of any such? download_internal: Specifying 'p' is now a nop -- it is tried by default first with fall-back to active FTP." Signed-off-by: Xavier Chantry <shiningxc@gmail.com> [Dan: remove from pacman.conf and pacman.conf.5] Signed-off-by: Dan McGee <dan@archlinux.org>
2009-07-23Add a fetch callback to allow front-end download supportSebastian Nowicki1-3/+14
This allows a frontend to define its own download algorithm so that the libfetch dependency can be omitted without using an external process. The callback will be used when if it is defined, otherwise the old behavior applies. Signed-off-by: Sebastian Nowicki <sebnow@gmail.com> [Dan: minor cleanups] Signed-off-by: Dan McGee <dan@archlinux.org>
2009-07-23Introduce -SuuNagy Gabor1-1/+1
If the user switches from unstable repo to a stable one, it is quite hard to sync its system with the new repo (the user will see many "Local is newer than stable" messages, nothing more). That's why I introduced -Suu, which treats a sync package like an upgrade, iff the package version doesn't match with the local one's. I added a new pactest (sync104.py) to test this, and I updated the documentation of -Su. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> [Dan: slight doc reword] Signed-off-by: Dan McGee <dan@archlinux.org>
2009-07-01Update copyright headers and messagesDan McGee1-1/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-06-09Give sensible feedback when a repo has no configured serversDan McGee1-0/+1
This fixes FS#14899. When running an -Sp operation without servers configured for a repository, we would segfault, so add an assert to the backend method returning the first server preventing a null pointer dereference. In addition, add a new error code to libalpm that indicates we have no servers configured for a repository. This makes -Sy and -S <package> operations fail gracefully and helpfully when a repo is set up with no servers, as the default mirrorlist in Arch is provided this way. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-06-02Introduce PM_TRANS_FLAG_NOLOCKNagy Gabor1-1/+3
This flag indicates that the front-end will not call alpm_trans_commit(), so the database needn't be locked. This is the first step toward fixing FS#8905. If this flag is set, alpm_trans_commit() does nothing and returns with an error (that has new code: PM_ERR_TRANS_NOT_LOCKED). Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-05-19Remove unused error codes and handle PM_ERR_RETRIEVE by alpm_strerror()Nagy Gabor1-9/+0
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-11Remove pmsyncpkg_tNagy Gabor1-3/+1
pmsyncpkg_t data sructure was removed: 1. pmpkg_t.reason is used instead of pmsyncpkg_t.newreason. (The target packages come from sync repos, so we can use this field without any problems. Upgrade transaction also uses this field to store this info.) 2. pmsyncpkg_t.removes was moved to pmpkg_t.removes. This step requires careful programming, because we don't duplicate packages when we add them to trans->packages. So we modify sync pkgcache when we add this transaction-only info to our package. Hence it is important to free this list when we remove any package from the target list (remove_unresolvable, remove_conflicts, trans_free), otherwise this could confuse the new sync transactions (with non-pacman GUI). Overall, our code became ~100 line shorter, and we can call our helper functions directly on trans->packages in sync.c, we don't need to maintain parallel package lists. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-11New error type: PM_ERR_PKG_IGNOREDNagy Gabor1-0/+1
This patch fixes FS#12059. Now sync_addtarget can return with PM_ERR_PKG_IGNORED, which indicates that although the requested package was found it is in ignorepkg, so alpm could not add it to the transaction. So the front-end can decide what to do. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-02-28libalpm: remove from_md5 and to_md5 from pmdelta_tXavier Chantry1-2/+0
The from_md5 and to_md5 fields were a nice extra safety, which would avoid trying to apply deltas on corrupted package files. However, they are not strictly necessary, since xdelta should be able to detect that on its own. The main problem is that it is impossible to compute these informations from the delta only. So repo-add would not be able to compute the delta entry based on just the delta file. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-02-24Enabled new interactive prompt and updated some testsBryan Ischo1-1/+2
Enabled a new prompt to ask the user if they'd like to remove unresolvable packages from the transaction rather than failing it. Many pactest tests that used to fail now return success codes, because pacman now issues a prompt allowing the user to cancel rather than failing many transactions, and the pactest scripts always choose to cancel with no error rather than failing. The only net effect is that the return status of pacman is now 0 in cases where it used to be nonzero. Signed-off-by: Bryan Ischo <bryan@ischo.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-13Rename alpm_get_md5sum to alpm_compute_md5sum and alpm_dep_get_string to ↵Nagy Gabor1-2/+2
alpm_dep_compute_string This patch introduces the following function name convention: _compute_ in function name: the return value must be freed. _get_ in function name: the return value must not be freed. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-13HoldPkg reworkNagy Gabor1-9/+1
The HoldPkg feature is even more important when the packages to be held are pulled automatically by pacman, in a -Rc and -Rs operation. Before, it only applied when the packages were explicitly requested by the user to be removed. This patch extends holdpkg to -Rc and -Rs by doing the HoldPkg check just before trans_commit. Additionally, the whole HoldPkg stuff was moved to the front-end. I changed the default behavior to "don't remove", so I modified remove030.py pactest as well. See also: FS#9173. Original-work-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-11-01Make libfetch the 'native' download libraryDan McGee1-1/+1
Use libfetch naming in the code in place of libdownload names. This is in preparation for dropping support for libdownload at some point as libfetch can run on Linux. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-11-01-Qu reworkNagy Gabor1-2/+0
From now on -Qu is an "outdated package" filter on local database. (This is a behaviour change.) This patch fixes some memleaks and makes the code cleaner, for details see my comment on FS#7884. FS#11868 is implemented. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-26Rename alpm_db_get{pkg,grp}cache to alpm_db_get_{pkg,grp}cacheXavier Chantry1-2/+2
This is more consistent with the private functions : _alpm_db_get_{pkg,grp}cache Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-26Change checkdeps and checkdbconflicts to be more flexible.Xavier Chantry1-2/+2
These two functions now take directly a package list rather than a database. checkdbconflicts was renamed to checkconflicts. Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2008-08-23Move -Sp implementation to the front-endNagy Gabor1-5/+1
This patch kills one of our hackish pseudo transactions: PRINTURIS. (The other one is -Sw) From now on, front-end must not call trans_commit in case of -Sp, it should print the uris of target packages "by hand" instead. PRINTURIS flag was removed, NOCONFLICTS flag can be passed to skip conflict checks. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23New public alpm_pkg_get_db functionNagy Gabor1-0/+1
This function returns with the origin database of a package. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>