summaryrefslogtreecommitdiffstats
path: root/lib/libalpm/be_local.c
AgeCommit message (Collapse)AuthorFilesLines
2011-02-04Get estimated package count when populating databasesDan McGee1-1/+7
This works for both local and sync databases in slightly different ways. For the local database, we can use the directory hard link count on the local/ folder. For sync databases, we use the archive size coupled with some computed average per-package sizes to determine an estimate. This is currently a dead assignment once calculated, but could be used to set the initial size of a hash table. Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2011-02-01Fix locale.h/setlocale inclusion with --disable-nlsDan McGee1-2/+0
Noted in FS#22697. When I factored out _alpm_parsedate() into a common function, I didn't move the <locale.h> include properly, causing a build failure when NLS is disabled and this header isn't automatically included everywhere. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-29Remove need to explicitly register the local DBDan McGee1-6/+1
Perform the cheap struct and string setup of the local DB at handle initialization time to match the teardown we do when releasing the handle. If the local DB is not needed, all real initialization is done lazily after DB paths and other things have been configured anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Remove epoch as an independent fieldDan McGee1-16/+0
Instead, go the same route we have always taken with version-release in libalpm and treat it all as one piece of information. Makepkg is the only script that knows about epoch as a distinct value; from there on out we will parse out the components as necessary. This makes the code a lot simpler as far as epoch handling goes. The downside here is that we are tossing some compatibility to the wind; packages using force will have to be rebuilt with an incremented epoch to keep their special status. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-12Fix double filelist issue when upgrading a packageDan McGee1-10/+12
Due to the way we funk around with package data loading, we had a condition where the filelist got doubled up because it was loaded twice. Packages are originally loaded with INFRQ_BASE. In an upgrade/sync, the package is checked for file conflicts next, leaving us in an "INFRQ_BASE | INFRQ_FILES" state. Later, when committing a single package, we have an explicit call to _alpm_local_db_read() with INFRQ_ALL as the level. Because the package's level did not match this, we skipped over our previous "does the incoming level match where I'm at" shortcut, and continued to load things again, because of a lack of fine-grained checking for each of DESC, FILES, and INSTALL. The end result is we loaded the filelist twice, causing our remove logic to iterate twice over the installed files, spewing a bunch of "cannot find file X" messages. Fix the problem by doing a bit more bitmasking logic throughout the load method, and also fix the sanity check at the beginning of the function- this should *only* be used for local packages as opposed to the "not a package" check that was there before. A debug log message was added to upgraderemove as well to match the one already in the normal remove codepath. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-08Use size_t for alpm_list sizesAllan McRae1-1/+1
There is a lot of swtiching between size_t and int for alpm_list sizes in the codebase. Start converting these to all be size_t by adjusting the return type of alpm_list_count and fixing all additional warnings given by -Wconversion that are generated by this change. Dan: a few more small changes to ensure things compile, adjusting some printf format string characters to accommodate the larger size on x86_64. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-08Refactor old date parsing into single methodDan McGee1-23/+2
We've managed to duplicate this four times at this point, so make it a method in util.c instead. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-08Update copyright years for 2011Allan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-06Remove FORCE reading from local DBDan McGee1-6/+0
We never wrote it here, so no need to read it in either. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-30Declare all local functions staticAllan McRae1-29/+33
All functions that are limited to the local translation unit are declared static. This exposed that the _pkg_get_deltas declaration in be_local.c was being satified by the function in packages.c which when declared static caused linker failures. Fixes all warnings with -Wmissing-{declarations,prototypes}. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-14Abstract has_scriptlet() to package ops structDan McGee1-0/+15
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-14Remove non-public functions from headerDan McGee1-2/+2
And rename accordingly. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13Abort db_populate if dbpath is not setBruno Widmann1-0/+3
Rather than segfault. Fixes FS#21345. Signed-off-by: Bruno Widmann <bruno.widmann@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13Merge desc and depends files in local dbAllan McRae1-88/+56
Whenever depends is needed from the local db, so is desc. The only disadvantage to merging them is the additional time taken to read the depends entries when they are not needed. As depends is in general relatively small, the additional time taken to read it in will be negligable. Also, merging these files will speed up local database access due to less file seeks. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13dirent usage cleanupDan McGee1-1/+1
We were including the header in a lot of places it is no longer used. Additionally, use the correct autoconf macro for determining whether d_type is available as a member: HAVE_STRUCT_DIRENT_D_TYPE. Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-14Add epoch support to pacman/libalpmDan McGee1-6/+16
This will allow for better control of what was previously the 'force' option in a PKGBUILD and transferred into the built package. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-14Small tweaks after backend mergeDan McGee1-9/+4
Just a few small things I noticed looking through the code. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-14Only write to local reposAllan McRae1-53/+38
We do not write to sync repos so kill the code for that. Signed-off-by: Allan McRae <allan@archlinux.org>
2010-10-14Clean-up parsing local databaseAllan McRae1-24/+3
Remove unnecessary parsing of fields not found in local desc files. Leave %FORCE% parsing as this likely will make an appearance in desc files in the future. Signed-off-by: Allan McRae <allan@archlinux.org>
2010-10-14Remove lazy loading of deltasAllan McRae1-24/+2
Local packages do not have deltas so remove lazy loading of delta information. Signed-off-by: Allan McRae <allan@archlinux.org>
2010-10-14Move and rename splitnameAllan McRae1-1/+1
The splitname function is a general utility function and so is better suited to util.h. Rename it to _alpm_splitname to indicate it is an internal libalpm function as was the case prior to splitting local and sync db handling. Signed-off-by: Allan McRae <allan@archlinux.org>
2010-10-14Restrict visibility of checkdbdir and get_pkgpathAllan McRae1-0/+34
These functions are only needed by be_local and were only promoted to db.{h,c} as part of the splitting of handling the local and sync dbs. Move them into be_local.c and make them static again. Signed-off-by: Allan McRae <allan@archlinux.org>
2010-10-14Populate sync db from archiveAllan McRae1-0/+1
Read in list of packages for sync db from tar archive. Breaks reading in _alpm_sync_db_read and a lot of pactests (which is expected as they do not handle sync db in archives...). Signed-off-by: Allan McRae <allan@archlinux.org>
2010-10-14Completely separate local and sync db handlingAllan McRae1-31/+36
Put the db_operations struct to use and completely split the handling of the sync and local databases. Signed-off-by: Allan McRae <allan@archlinux.org>
2010-10-14Separate be_files into be_sync and be_localAllan McRae1-0/+985
The file be_files.c is "split" to be_local.c and be_sync.c in order to achieve separate handling of sync and local databases. Some basic clean-up of functions that are only of use for local or sync databases has been performed and some rough function renaming in duplicated code has been performed to prevent compilation errors. However, most of the clean-up and final separation of sync and local db handling occurs in following patches. Signed-off-by: Allan McRae <allan@archlinux.org>
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-11-05 11:01:21 +0100