summaryrefslogtreecommitdiffstats
path: root/lib/libalpm/be_package.c
AgeCommit message (Collapse)AuthorFilesLines
2012-03-09Merge branch 'maint'Dan McGee1-13/+19
Conflicts: lib/libalpm/be_package.c
2012-03-09Remove _alpm_csumAllan McRae1-2/+2
The enum alpm_pkgvalidation_t is essentially a more generic version of _alpm_csum, so use it instead. Signed-off-by: Allan McRae <allan@archlinux.org>
2012-03-09Add information on how an installed package was validatedAllan McRae1-2/+21
When installing a package, store information on which validation method was used and output this on "pacman -Qi" operations. e.g. Validated By : SHA256 Sum Possible values are Unknown, None, MD5 Sum, SHA256 Sum, Signature. Dan: just a few very minor tweaks. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-09Hook new optdepend structures upBenedikt Morbach1-2/+3
No new behaviour introduced, everything should work exactly as before. Dan: refactored to use the single alpm_depend_t structure. Signed-off-by: Benedikt Morbach <benedikt.morbach@googlemail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-05Fix a potential memory leak in filelist creationDan McGee1-13/+19
If we begin to create a file list when loading a package, but abort because of an error to one of our goto labels, the memory used to create the file list will leak. This is because we use a set of local variables to hold the data, and thus _alpm_pkg_free() cannot clean up for us. Use the file list struct on the package object as much as possible to keep state when building the file list, thus allowing _alpm_pkg_free() to clean up any partially built data. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-05Fix a memory leak when loading an invalid packageDan McGee1-3/+3
This is easily triggered via a `pacman -Sc` operation when it attempts to open a delta file as a package- we end up leaking loads of memory due to us never freeing the archive object. When you have upwards of 1200 delta files in your sync database directory, this results in a memory leak of nearly 1.5 MiB. Also fix another memory leak noticed at the same time- we need to call the internal _alpm_pkg_free() function, as without the origin data being set the public free function will do nothing. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-20Update copyright yearsAllan McRae1-1/+1
Add 2012 to the copyright range for all libalpm and pacman source files. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-13use _alpm_access in a few more places for increased debugging infoFlorian Pritz1-1/+1
pacman -U <pkg> returns a bogus "could not find or read package" if the file is on a fuse file system that doesn't allow root access. Debug output isn't very helpful here either so we should log why the access check failed. The other 2 checks already log something when failing so logging a more specific error won't hurt either. Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-08Fix segfaults on opening invalid archive filesDan McGee1-2/+2
"invalid" in this case simply means files that may or may not be archives. Discovered via a `pacman -Sc` operation with delta files in the package cache directory, but can be triggered if any file is passed to `pacman -Ql` that isn't an archive, for instance, or if the sync database file is not an archive. Fix it up so we are more careful about calling archive_read_finish() only on archives that are valid and have not already been closed, and teach our archive open function to set the returned archive to NULL if we aren't going to be returning something valid anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-02be_package.c: fix compiler warningAllan McRae1-1/+1
be_package.c: In function 'parse_descfile': be_package.c:181:28: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] ptr - key + 2 is guaranteed to be > 0 so we can cast to size_t Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-23be_package: be more explicit parsing key/value pairsDan McGee1-9/+12
This eliminates the need for strtrim() usage completely, instead relying on the fact that the only allowed delimiter between key and value is the " = " string. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-22include config.h via MakefilesDave Reisner1-2/+0
Ensures that config.h is always ordered correctly (first) in the includes. Also means that new source files get this for free without having to remember to add it. We opt for -imacros over -include as its more portable, and the added constraint by -imacros doesn't bother us for config.h. This also touches the HACKING file to remove the explicit mention of config.h as part of the includes. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-16Add helper method for creating and opening archive objectDan McGee1-35/+35
This moves the common setup code of about 5 different callers into one method. Error messages will now be common and shared in all places; several paths did not have any messages at all before. In addition, we now pick an ideal block size for the archive read based off the larger value of our default buffer size or the st.st_blksize field. For a filesystem such as NFS, this is often much larger than the default 8192- values such as 32768 and 131072 are common. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-01Convert package and database archive reads to use file descriptorsDan McGee1-18/+32
This gives us a bit more control and over the archive reading process, and a bit less is done behind the scenes. It also allows us to use fstat() in preference to stat(), which should avoid some potential race conditions. Some reorganization is necessary to move the stat calls after the open() calls. Error handling and cleanup in general is also improved, as we had several potential memory and file handle leaks before in some error paths. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-27Introduce ALPM_BUFFER_SIZE constantDan McGee1-2/+2
This takes the place of three previously used constants: ARCHIVE_DEFAULT_BYTES_PER_BLOCK, BUFFER_SIZE, and CPBUFSIZE. In libarchive 3.0, the first constant will be no more, so we can ensure we are forward-compatible by removing our usage of it now. The rest are unified for consistency. By default, we will use the value of BUFSIZ provided by <stdio.h>, which is 8192 on Linux. If that is undefined, a default value is provided. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-26Don't realloc a 0-length files array when loading packagesDan McGee1-8/+10
There is some pecular behavior going on here when a package is loaded that has no files, as is very common in our test suite. When we enter the realloc/sort code, a package without files will call the following: files = realloc(NULL, 0); One would assume this is a no-op, returning a NULL pointer, but that is not the case and valgrind later reports we are leaking memory. Fix the whole thing by skipping the reallocation and sort steps if the pointer is NULL, as we have nothing to do. Note that the package still gets marked as 'files loaded', becuase although there were none, we tried and were successful. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Add _alpm_process_siglist() logic to failed package validationDan McGee1-0/+1
This moves the result processing out of the validation check loop itself and into a new loop. Errors will be presented to the user one-by-one after we fully complete the validation loop, so they no longer overlap the progress bar. Unlike the database validation, we may have several errors to process in sequence here, so we use a function-scoped struct to track all the necessary information between seeing an error and asking the user about it. The older prompt_to_delete() callback logic is still kept, but only for checksum failures. It is debatable whether we should do this at all or just delegate said actions to the user. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20Pass package signature data up one more levelDan McGee1-8/+5
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20Allow our PGP helper method to pass back the signature resultsDan McGee1-1/+6
This will make its way up the call chain eventually to allow trusting and importing of keys as necessary. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20Extract an _alpm_pkg_validate_internal() methodDan McGee1-33/+56
_alpm_pkg_load_internal() was becoming a monster. Extract the top bit of the method that dealt with checksum and signature validation into a separate method that should be called before one loads a package to ensure it is valid. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-19Remove const specifier from changelog_read() void parameterDan McGee1-1/+1
This shouldn't really be declared with const, and causes a compile error when -Wcast-qual is used. Remove the const specifier from the function specification and all implementations. Also fix one other trivial -Wcast-qual warning in _alpm_db_cmp(). Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-08Ensure PackageRequired works as expectedDan McGee1-6/+7
Changes in commit dc3336c277 caused this to stop working as expected for sync packages, due to the way the logic is structured. Ensure we always enter the signature code if the bitflag is flipped on to check signatures for packages. Rename 'use_sig' to 'has_sig' for clarity. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-30Parse > 2GiB file sizes correctlyDan McGee1-1/+1
We were using atol(), which on 32 bit, cannot handle values greater than 2GiB, which is fail. Switch to a strtoull() wrapper function tailored toward parsing off_t values. This allows parsing of very large positive integer values. off_t is a signed type, but in our usages, we never parse or have a need for negative values, so the function will return -1 on error. Before: $ pacman -Si flightgear-data | grep Size Download Size : 2097152.00 K Installed Size : 2097152.00 K After: $ ./src/pacman/pacman -Si flightgear-data | grep Size Download Size : 2312592.52 KiB Installed Size : 5402896.00 KiB Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29Better error handling out of package load methodDan McGee1-1/+1
There are many other ways to fail a package load other than "file not found". We should also use the correct error code in this case. Clean it up a bit in the various callers. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29Refactor some args out of pkg_load_internalDan McGee1-32/+34
Just pass the entire sync package in if we have it; that way we can do any necessary operations involving it rather than have a parameter list growing endlessly. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Remove argument from check_pgp_helperDan McGee1-1/+2
This one wasn't all that necessary as we only used it in one place in the function, which can be checked easily enough at the call site. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-15Only check necessary signatures and checksumsDan McGee1-5/+17
The precedence goes as follows: signature > sha256sum > md5sum Add some logic and helper methods to check what we have available when loading a package, and then only check what is necessary to verify the package. This should speed up sync database verifies as we no longer will be doing both a checksum and a signature validation. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-15Parse conflicts/provides/replaces at database load timeDan McGee1-3/+6
We did this with depends way back in commit c244cfecf654d3 in 2007. We can do it with these fields as well. Of note is the inclusion of provides even though only '=' is supported- we'll parse other things, but no guarantees are given as to behavior, which is more or less similar to before since we only looked for the equals sign. Also of note is the non-inclusion of optdepends; this will likely be resolved down the road. The biggest benefactors of this change will be the resolving code that formerly had to parse and reparse several of these fields; it only happens once now at load time. This does lead to the disadvantage that we will now always be parsing this information up front even if we never need it in the split form, but as these are uncommon fields and our parser is quite efficient it shouldn't be a big concern. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-15Validate the sha256sum if availableDan McGee1-4/+17
Adjust load_internal() to check the sha256sum value if we have it. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-09Attempt to fix up some of the brokenness around failed package loadsDan McGee1-1/+1
This is a bit of a mess, due to the fact that we have a progress meter running. It is also ironic that we are in the midst of a method named "commit" when we haven't done a damn thing yet, and can still fail hard if either a checksum or signature is invalid or unrecognized. Adapt the former test_md5sum method to be invoked for any of the various failure types, which at least gives the user some indication of what packages are failing. A second patch will be needed to actually show worthwhile error codes, but this is going to involve modifying the actual data passed with the callback. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-08Store a package info level flag if we fail to load dataDan McGee1-2/+2
If we are missing a local database file, we get repeated messages over and over telling us the same thing, rather than being sane and erroring only once. This package adds an INFRQ_ERROR level that is added to the mask if we encounter any errors on a local_db_read() operation, and short circuits future calls if found in the value. This fixes FS#25313. Note that this does not make any behavior changes other than suppressing error messages and repeated code calls to failure cases; we still have more to do in the "local database is hosed" department. Also make a small update to the wrong but unused flags set in be_package; using INFRQ_ALL there was not totally correct. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-02Don't trim whitespace when reading database entriesDan McGee1-4/+3
We don't write with extra or unknown whitespace, so there is little reason for us to trim it when reading either. This also fixes the hopefully never encountered "paths that start or end with spaces" issue, for which two pactests have been added. The tests also contain other evil characters that we have encountered before and handle just fine, but it doesn't hurt to ensure we don't break such support in the future. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-21Convert package filelists to an array instead of linked listDan McGee1-13/+73
This accomplishes quite a few things with one rather invasive change. 1. Iteration is much more performant, due to a reduction in pointer chasing and linear item access. 2. Data structures are smaller- we no longer have the overhead of the linked list as the file struts are now laid out consecutively in memory. 3. Memory allocation has been massively reworked. Before, we would allocate three different pieces of memory per file item- the list struct, the file struct, and the copied filename. What this resulted in was massive fragmentation of memory when loading filelists since the memory allocator had to leave holes all over the place. The new situation here now removes the need for any list item allocation; allocates the file structs in contiguous memory (and reallocs as necessary), leaving only the strings as individually allocated. Tests using valgrind (massif) show some pretty significant memory reductions on the worst case `pacman -Ql > /dev/null` (366387 files on my machine): Before: Peak heap: 54,416,024 B Useful heap: 36,840,692 B Extra heap: 17,575,332 B After: Peak heap: 38,004,352 B Useful heap: 28,101,347 B Extra heap: 9,903,005 B Several small helper methods have been introduced, including a list to array conversion helper as well as a filelist merge sort that works directly on arrays. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-05signing: move to new signing verification and return schemeDan McGee1-11/+9
This gives us more granularity than the former Never/Optional/Always trifecta. The frontend still uses these values temporarily but that will be changed in a future patch. * Use 'siglevel' consistenly in method names, 'level' as variable name * The level becomes an enum bitmask value for flexibility * Signature check methods now return a array of status codes rather than a simple integer success/failure value. This allows callers to determine whether things such as an unknown signature are valid. * Specific signature error codes mostly disappear in favor of the above returned status code; pm_errno is now set only to PKG_INVALID_SIG or DB_INVALID_SIG as appropriate. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-03Merge remote-tracking branch 'allan/ALPM'Dan McGee1-29/+29
Conflicts: lib/libalpm/be_local.c lib/libalpm/be_package.c lib/libalpm/conflict.c lib/libalpm/diskspace.c lib/libalpm/dload.c lib/libalpm/remove.c
2011-07-03Move alpm filelists to a struct objectDan McGee1-3/+11
This allows us to capture size and mode data when building filelists from package files. Future patches will take advantage of this newly available information, and frontends can use it as well. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-01Prefix _alpm_errno_t members with ALPMAllan McRae1-14/+14
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-07-01Prefix alpm_loglevel_t members with ALPMAllan McRae1-15/+15
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmbackup_t to alpm_backup_tAllan McRae1-2/+2
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmdepend_t to alpm_depend_tAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmpkg_t to alpm_pkg_tAllan McRae1-11/+11
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmhandle_t to alpm_handle_tAllan McRae1-3/+3
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-24Remove three unnecessary usages of alpm_list_count()Dan McGee1-2/+3
For the files count when loading from a package, we can keep a counter. The two in the frontend were completely useless due to the fact that if sync_dbs is non-NULL, alpm_list_count() will always be greater than 0. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-22Convert backup list to new pmbackup_t typeDan McGee1-1/+4
This allows us to separate the name and hash elements in one place and not scatter different parsing code all over the place, including both the frontend and backend. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-20Documented purpose of be_*.cKerrick Staley1-1/+1
Added a line to the top of each of be_local.c, be_package.c, and be_sync.c indicating their purposes. Signed-off-by: Kerrick Staley <mail@kerrickstaley.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-14Ensure handle is valid and pm_errno is reset when calling into APIDan McGee1-1/+1
We didn't do due diligence before and ensure prior pm_errno values weren't influencing what happened in further ALPM calls. I observed one case of early setup code setting pm_errno to PM_ERR_WRONG_ARGS and that flag persisting the entire time we were calling library code. Add a new CHECK_HANDLE() macro that does two things: 1) ensures the handle variable passed to it is non-NULL and 2) clears any existing pm_errno flag set on the handle. This macro can replace many places we used the ASSERT(handle != NULL, ...) pattern before. Several other other places only need a simple 'set to zero' of the pm_errno field. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-14Small handle related cleanupsDan McGee1-2/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-14Switch all logging to use handle directlyDan McGee1-17/+17
This is the last user of our global handle object. Once again the diff is large but the functional changes are not. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-14Move pm_errno onto the handleDan McGee1-20/+20
This involves some serious changes and a very messy diff, unfortunately. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-14Require handle for alpm_pkg_load()Dan McGee1-8/+8
Signed-off-by: Dan McGee <dan@archlinux.org>
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-11-05 09:41:29 +0100